How to wash hoods. Video: How to clean grease from a kitchen hood without chemicals? What products can be used to clean kitchen hood parts?

The hood is designed to get rid of odors in the room; it is through it that fumes and exhaust air are drawn out of the kitchen. Since the kitchen hood operates 24 hours a day, the grille of the device quickly becomes dirty. Dust and grease settle on it. There are several effective ways to clean your hood grille.

Each model kitchen hood There is a guide to disassembling the equipment. Before you remove some of the parts yourself, you need to familiarize yourself with it. Sometimes the circuit is placed on the outside of the hood itself or under the housing cover. The methods for attaching spare parts are different for all models, but the disassembly algorithm for cleaning is similar:

1. First of all, you need to disconnect the kitchen hood from the power source.
2. Removed top part housings.
3. Then you need to remove the metal grill. Fasteners are usually used as fastenings, which can be snapped off with light pressure.
4. If there is a carbon filter, it must also be removed.
5. The last pipe to be unscrewed is the one that carries dirt and soot into the vent.

In order for the hood to work as efficiently as possible, it is necessary in addition metal mesh also clean the latches holding it and profile pipe. If you need to wash the kitchen hood body, it is not necessary to remove it.

Methods for cleaning a kitchen hood

Removing stubborn grease from the surface of a metal mesh may not be so easy. There are several most common means by which you can clean the grill from frozen dirt:

• laundry soap;
• vinegar;
• lemon acid;
• ammonia;
• steam cleaner;
• dishwasher.

When using each product, you need to maintain proportions so as not to damage the metal mesh.

Household chemicals for cleaning

Working with household chemicals must be approached with caution. Cleaning powders can cause allergies, so use rubber gloves.

For cleaning you will need a regular household sponge. It is desirable that it has both porous and abrasive sides. The grate must be soaked in warm water with added cleaning agent. A special powder for cleaning gas stoves that corrodes grease is suitable for this. You can also use dishwashing detergent. Soak the mesh in the product for at least 15 minutes. If regular remedies don't work, you can use bleach. You need to apply white to the wet grate using a scrap toothbrush. The bleach must be washed off after 10 minutes using a sponge.

It is worth considering that it is not advisable to use cleaning powder on a grate made of of stainless steel. Metal corrodes easily, so after a few rough cleanings it may become rusty and unusable.

Cleaning the hood with laundry soap

You can effectively remove lightly ingrained fat at home using soap solution. For this, regular laundry soap is used. This method is suitable even for steel gratings.

For the solution you must use 72% soap. The grate is soaked in hot water. For one liter of water you will need at least a quarter of a briquette of laundry soap. You can clean the metal grille from the hood in this way using a scraper. The scraper can be made of plastic, but for stubborn dirt, a metal one is more suitable.

Removing dirt with soda

Baking soda is a well-known folk remedy that is found in every home. The advantage of this method of cleaning the hood is that there is no damage to the metal grille.

Half a glass of soda must be dissolved in three liters of water. It is necessary to put the mixture on the fire and bring to a boil. The metal grate should boil in this solution for about half an hour. After this method, no additional cleaning with sponges or scrapers is usually required.

Baking soda is an effective cleaning agent

Vinegar for cleaning the hood

Vinegar should be used to clean metal mesh with extreme caution. It is advisable to use rubber gloves and also open windows in the room, as vinegar has a strong odor. Liquid vapors may cause irritation of mucous membranes.

To clean the hood, you need to apply undiluted vinegar to it. This can be done by gently blotting the mesh with a sponge soaked in vinegar. Leave the grate for 10 minutes to allow the vinegar to eat away the dirt. You can also soak the hood mesh in undiluted vinegar for 20 minutes. Remaining grease must be removed using an abrasive sponge.

Citric acid for cleaning hoods

To clean the hood, you can use either citric acid or lemon zest. Pour citric acid onto a damp surface of a metal grate and let it soak in for 15 minutes. It is worth removing the product along with the dissolved fat using warm water and a brush.

To clean the grate with fruit, two lemons are used. They are cut in half and the zest is rubbed onto the grill. You need to rub thoroughly so that the mesh is well saturated with lemon juice. Just as in the case of citric acid, residual fat is removed.

Citric acid is not one of the most effective cleaning agents. It may be necessary to wash the hood grate with acid several times to remove stubborn dirt.

Cleaning metal mesh with ammonia

If the dirt is strongly ingrained into the bars of the grill, you can use ammonia. It is worth remembering that this is a very caustic product that must be used with great care. When cleaning, be sure to use rubber gloves and protective mask. The room must be fully ventilated.

For the cleaning solution, mix half a glass ammonia and 3.5 liters hot water. You need to soak the hood for at least an hour. Afterwards, wash the metal grill under running water.

Using a steam cleaner to clean the hood

A good way to remove even stubborn grease from surfaces is with a steam generator. Quite expensive, but efficient technique. Under the influence of a temperature of 150 degrees, dirt lags behind the surface. After using a steam cleaner, it is enough to wipe the hood parts with a regular dish sponge. Another benefit of steam cleaning is that it disinfects all surfaces.

Cleaning the rack in the dishwasher

A dishwasher is suitable for regular cleaning of kitchen hood elements. To wash dirt from the grate, you need to load it into the compartment for large dishes. Cleaning should be done using your usual detergent. Under influence household chemicals, as well as hot water, the grate will quickly clean.

The method may not be suitable if the grate has not been cleaned for several months. Then you will have to remove the fat using more caustic agents.

The hood grille should be cleaned at least once a month to prevent dirt from becoming embedded in the surface. If you use only abrasive cleaning, the grill may become unusable.

Your kitchen hood will work properly for several years if you clean it regularly. You can use both special detergents and methods proven over the years to break down fat.

How often should you clean your hood?

A kitchen hood is usually equipped with one of two methods of air purification - a carbon filter or a metal grille. Sometimes both methods are used simultaneously.

The carbon filter is a cartridge that absorbs grease and odors. There is no need to wash it, since the carbon filters need to be replaced as they become dirty. Usually they become clogged and become unusable after three months of use. In some hood models, carbon filters can be changed once a year.

The metal grille in kitchen hoods is removable and can be cleaned periodically. It is made of metal. The most commonly used materials are aluminum or stainless steel. Also, for improved air purification from fumes, the mesh is supplemented with padding polyester or non-woven fabric. There are several features in the operation of the equipment by which you can understand that the metal grill needs to be cleaned:

• During operation of the hood, extraneous noise appeared;
• traction force decreased;
• appeared while cooking bad smell burning.

The grille must be washed monthly so that the kitchen hood works properly and dirt does not eat into the grille.

Don’t know how to clean the kitchen hood from grease and fumes? Don't despair. We will tell you about all the simplest and most effective ways to care for your range hood to create a fresh atmosphere in your kitchen. This can be achieved with pennies folk remedies and household chemicals, with virtually no effort.

Preliminary preparation before cleaning the hood

If you have planned a full wash kitchen appliances, then get ready to have to scrub the cap, grille, filter and all the insides of the device. Before washing the hood, carefully read the instructions, unplug the umbrella from the network, and carry out the following manipulations:

• Dismantle the hood mesh, which is located above the stove, by unfastening the special fasteners.
• Remove all removable components of the device: grille and filter.

Important! Some models have internal disposable filters that can simply be replaced with new ones.

Traditional recipes for cleaning internal parts

There are many ways to clean a kitchen hood from soot and grease. Most of them are based on the use of improvised means.

Soda solution

Cleaning a kitchen hood with soda is very effective, as sodium carbonate easily removes greasy spots from the surface. Usage:

1. Pour 5 liters of water into an iron pan and place it on the stove to heat.
2. When the water is warm, pour a standard packet of baking soda into it.
3. After dissolving it, immerse the filter and grid into the container. After this, bring the brew to a boil on the stove.
4. Boil on low heat for about 30-60 minutes.
5. Over time, you will notice that all contaminants are easily and simply removed from surfaces. Rinse the elements with running water, using a brush to help remove particularly stubborn areas.
6. To enhance the effect, add shavings of laundry soap to boiling water.

Detergent + cleaning powder for hood

1. Soak the removable parts in a container with warm water, after adding dishwashing detergent that fights grease.
2. Leave everything in the water for an hour.
3. After this, using the powder and a soft metal sponge, rinse the filter and grilles with running water.
4. If at the end of the procedure there are still dirty areas, repeat the procedure from the beginning.

Recipe with vinegar essence and soda

Simple and effective method To clean the kitchen hood from grease, dust and soot, use a combination of soda and vinegar essence.

1. Place the “ventilation” grille and filter on flat surface, sprinkling baking soda on top.
2. Pour vinegar essence (70% undiluted) into a spray bottle and thoroughly spray all the soda with it, focusing Special attention the most contaminated areas.
3. Leave to lie for 10-20 minutes. After this, rinse the parts with clean water.

Important! When cleaning the kitchen, you need to watch your hands, so be sure to wear protective gloves before starting any manipulations.

Soda + vegetable oil

1. Mix soda powder with vegetable oil in proportions of 1/1.5 and stir until thick sour cream.
2. Spread the resulting mass onto the removable elements of the device and leave it alone for half an hour.
3. After the dirt comes off, wash everything with water, and additionally help yourself with a brush.
4. This cleaning of the hood from grease will give the surfaces shine and cleanliness.

Lemon cleansing option

1. Divide a large lemon into two halves or quarters.
2. Wipe all contaminated areas on the filter and mesh with them.
3. Let the lemon juice soak into old grease and grime stains for about 10 minutes.
4. During this time, wipe the surfaces with a damp cloth.
5. Repeat everything from the very beginning until the result satisfies you.

Cleansing with ammonia

1. Dilute half a glass of ammonia in 3-4 liters of hot water.
2. Immerse all dirty parts in the boiling solution for 3-4 hours.
3. After this, use a sponge or brush to remove any remaining dirt and grease.

Important! Before you start cleaning the device in your apartment, be sure to put on a respirator and ventilate your home, otherwise there is a risk of burns. internal organs caustic vapors of ammonia.

Household chemicals in the fight for clean hoods

Today, the range of household chemicals for combating kitchen umbrella contamination is huge. Here are the ones that will definitely cope with stains:

• Sanita spray will “corrode” fat accumulations, yellow plaque and other contaminants in a matter of minutes. Sanita is considered an express product and occupies a leading position in the market due to its budget cost And universal action. The product is not intended for the care of varnished and enameled surfaces.
• "Anti-Fat" Cinderella. Gently removes the most stubborn dirt. Applicable on all surfaces. Just spray the product on the dirt, and after half an hour, remove the residue with a sponge. The downside is that it consumes quickly.

• Synergetic. This gel is positioned as a natural and safe cleaning product that does not contain harsh chemicals. On the plus side, the gel is biodegradable. Also suitable for cleaning pans and cleaning the oven.
• CilitBang "Anti-Fat + Radiance". Created on the basis of surfactants without abrasives, which have a gentle effect on the oldest soot.

Interesting! All gel-like preparations are used according to the scheme. Place the removable parts in a deep container, spread several layers of the product, and pour Not big amount hot water. After 10 minutes, put on gloves, take a wire brush and remove any remaining grease.

• Whiteness is a universal cleaning agent exhaust hood at home. Apply it to a surface moistened with water and wait 20 minutes. Wash with water. Work carefully and follow safety precautions.

To properly clean your hood from grease, you can use some household tricks:

• Place all removed equipment parts in dishwasher using mild detergents that are designed for dishwasher use. According to a lot of reviews on the Internet, the machine will cope with the task perfectly.
• Steam cleaner with sponge attachments. It runs on electricity, so all you have to do is move it across the surface, melting the plaque.

You should take a comprehensive approach to cleaning, since grease often accumulates not only inside, but also outside.

Important! When handling the outside of the device, be extremely careful not to get any cleaning products on your face or hands.

• We recommend using a variety of preparations for ovens and stoves, which are applied by spraying and eat away dirt and grease in just 15 minutes.
• Washing the device is recommended at least once every 3 months, or more often as it becomes dirty.

In order not to worry about how to clean the hood when the grease has already become ingrained, you should worry about preventing contamination:

• Every time you have finished cooking, wipe off any drops of oil from the device with a sponge;
• wash filters regularly (1-2 times a month);
• clean the product slowly, having studied the instructions for use of cleaning products;
• minimize the operation of the burners “idle”, as dry heat contributes to the formation of dense, thick carbon deposits on the surface;
• after washing the corrugation and returning it to its place, be sure to check the traction.

Timely care will allow you to keep your equipment clean and extend its service life. Give the little worker some time and she will repay you fresh air in the kitchen. What cleaning methods do you use? Share recipes with readers in the comments.

Video: Caring for a kitchen hood using folk remedies

Today's stoves do not smoke, but cooking still generates not only appetizing smells, but suspended particles of fat float above the frying pans and pots, which without exhaust hood would settle on all surrounding objects. In addition to grease, dust reigns in the air of any kitchen.

The kitchen hood successfully absorbs all of the above, leaving our kitchen clean. Until one day you discover that everything inside her is now overgrown with a terrible gray yellow coating from grease and dust, and she already needs cleaning herself.

This work should not be put off for a long time - the more dirt, the worse the hood copes with its duties.

Cleaning the hood from grease should begin with de-energizing the device. Read the instruction manual; it will usually indicate detergents and cleaning products that should not be used on your model.

The first thing to clean is the kitchen hood grille, which traps grease particles. It’s called a “grease filter”.

First you need to remove it from the box. Either it is attached with latches or with rotating mechanism. There should be no problems, since the manufacturer has provided for regular removal and cleaning.

How to clean light dirt on a mesh from a hood

If the grate is covered with a yellow coating and there is not too much of it, then you are dealing with almost pure grease, which can easily be dealt with using dishwashing detergents - lather and scrub with a brush to get to every corner of the mesh. Repeat until the metal returns to its original color.

Clean the hood grate dishwasher safe: place the filter vertically and wash it, you can even maximum temperature, because your filter has survived more than that over the stove. If you are concerned about the plastic, lower the temperature.

You can wash the kitchen hood filter from grease using steam. Try cleaning the filter using a steamer - if not the whole filter, then the most problematic areas.

How to clean a hood mesh from moderate contamination

Will it help here or take a long time manual labor, or you can speed up the process if you use folk remedies for such cases.

Can do all the work for you baking soda or soda ash + soap. Here's what you'll need:

• soda ash;
• laundry soap marked on the side 72%;
• soap grater.

Cleaning the kitchen hood only with soda, for this:

1. Heat water in a container and dissolve soda in it - from two tablespoons to a whole pack, both the volume of the dishes and the amount of dirt matter here.
2. Lower the grill into boiling water and boil for 10 minutes to half an hour.
3. Don't forget to stir the liquid.
4. After boiling, rinse the grate with hot water.

After half an hour, either you already have a clean grate, or you need to continue:

1. Grate a bar of laundry soap or take ready-made liquid soap.
2. Place soap and up to 5 tablespoons of soda ash in a container of hot water.
3. Boil the grate in the solution for the same 10-30 minutes.
4. Rinse off any remaining soap and baking soda with water.

Clean the grate (mesh) from the hood from grease You can use ammonia:

1. Make a 25% solution (3 parts water and 1 part ammonia) and immerse the mesh in it.
2. After soaking for half an hour, you can start cleaning with a regular brush.

The method is extremely odorous and should be used with a respirator and free air flow.

For average contamination, these products are sufficient, but before moving on to stronger products, it is worth explaining that alkalis are used to combat grease - from the weakest alkaline solutions (tea soda) to caustic soda solution.

Even in laundry soap contains remains of the latter. Alkali hydrolyzes fat, which is an organic acid.

In practice, it looks like it is dissolving, because the reaction produces glycerin and soap.

How can you clean the hood grille if it is heavily soiled?

If the grate has not been cleaned for a long time, you need to either repeat the methods described above several times, or take a risk and try stronger products.

It doesn’t matter much what you choose: will it be an expensive product that says it is intended for cleaning ovens and stoves, or will it be a plumbing “Mole”, or will you buy caustic soda in bulk - the main substance it will still be sodium hydroxide. The choice is yours.

Grease filters are often made of aluminum. Both it itself and its oxide interact with sodium hydroxide. In order to clean the grease filter in the hood, you should not resort to caustic alkali.

Those who decide to do this will need rubber gloves and a plastic basin. the right size(acids and alkalis do not interact with most types of plastic, you can check).

If you take caustic soda, then increased precautions- ventilated room, eye protection with goggles, long sleeves, an apron, if available - a respirator. Suitable for diluting caustic soda glassware and stainless steel. The concentration of the solution is up to 20 percent (or less will do).

Do not pour water on the soda, just the opposite: pour soda into the water. Do not breathe over the container - fumes may cause chemical burns. Do not neglect safety, even if you use a ready-made product.

1. Place the grate in the caustic solution.
2. Wait until clean and remove with gloves.
3. Rinse under running water.
4. Pour the solution down the drain.

The tools listed above cannot help but help, so we will assume that we have completed the first task of cleaning the kitchen hood. The next step is optional - it is for those who have a carbon filter installed.

Kitchen hood carbon filter

It is installed in two cases: either to return purified air to the room - in hoods with recirculation, or to increase the service life of a hood that has access to the ventilation shaft. In the latter case, it protects the motor. Regardless of the goal, This filter is for one-time use.. It will not be possible to clean it like the previous one.

The activated carbon inside the filter cassette is an excellent absorbent, but it also has a limit, after which the filter becomes an air barrier.

Usually the manufacturer indicates the replacement period, but you should focus not only on what is written: intensive use of the stove reduces guarantee period. If it is recommended to change it every 3-4 months, you can time a complete cleaning of the hood to coincide with the change.

Removing the carbon filter from the hood is simple: it is installed in the slot intended for it. Pull it out and install a new cassette.

In principle, you can disassemble the used filter, remove the contents from it and replace it with fresh granular carbon. If you think that the game is worth the candle.

The cost of a new filter varies from 500 rubles to several thousand - depending on the company, model and service life. You don’t have to buy a branded one; there are inexpensive universal ones that fit most models.

The disadvantage of replacing the cartridge yourself is that its performance will have to be determined experimentally: by periodic checks. (Branded filters have an indicator showing how clogged they are.)

There is one trick that prolongs the life of anyone carbon filter : Get into the habit of not immediately turning off the hood after turning off the stove. Let it work for another 5-10 minutes. The moisture absorbed by the coal during this time will have time to evaporate. Dry coal does not cake and does not form a mass impenetrable to air.

How to clean grease from the outside of a kitchen hood

As a rule, you can clean the hood body in the kitchen without much difficulty. It is enough to dilute any detergent in warm water and wash the surface of the hood with a sponge or napkin.

Although there are some nuances here too. The body can be plastic or metal. If the latter is chrome-plated, then you will have to make some efforts to ensure that after drying there are no stripes left on the metal. This is done like this: you need to finish washing the body with horizontal movements. For stainless steel, there are commercially available products to clean and protect against damage.

Abrasives and hard brushes are a poor assistant when cleaning smooth surfaces of the case. Products that contain chlorine are also undesirable.

Unfortunately, the hood control buttons also become dirty. They should be wiped with a wrung out soapy cloth, and dirt from the grooves can be cleaned out with an old toothbrush. The main thing is to make sure that no water gets inside. Finally, wipe everything dry.

In conclusion, it is worth mentioning prevention. You need to do the hood regularly, but you have to choose the frequency of cleaning yourself: from 2 to 4 months.

It is enough to take a quick glance at the hood, covered with soot, a layer of fat, and a viscous coating, and most housewives give up. And this is not surprising, since few people are attracted to the prospect of spending 2-3 hours fiddling with dirt. But what to do in such a situation? Will scale and combustion products affect the performance of the unit?

Experts strongly recommend preparing for a “thorough confrontation.” So, how to clean the kitchen hood from grease as quickly and efficiently as possible? It's not enough to just return household device visually presentable appearance. Superficial cleaning will not only not eliminate the problem, but will also become the root cause of a decrease in the performance of the unit.

At home, it is necessary to treat the grilles, the cap, and the internal elements of the device. The key task is to remove plaque from the surface of the filter, since the proper operation of the hood depends on it. Any activities related to intervention in the “insides” of the unit should begin with preparation.

Preparing a household appliance for cleaning

First of all, you should visually inspect kitchen appliance, fixed above the slab, for the position of the structure itself. Cleaning begins with disassembling the device. All elements and functional units are carefully unscrewed and fasteners are removed.

If the design allows, it is better to remove the grease trap, as well as the outlet pipe itself. Perfect option– treat all parts that have even a hint of fat or soot. This will increase the productivity of the unit as a whole and its service life. efficient operation in particular.

note! In 90% of cases, the user instructions that come with each device indicate not only how to wash the kitchen hood filter from grease, but also with what means. Here you can also familiarize yourself with the sequence of analysis of the household assistant.

In most cases, the sequence of actions is as follows:

1. 1. The cover of the device is dismantled (just click on the special latches and pull the metal element out of the grooves).
2. 2. Removed.
3. 3. The pipe is removed, since it requires equally careful processing.
4. 4. The air filter layer is removed.
5. 5. Dirt, scale and other residual products are removed from the body. It is very important to use only soft cloths, sponges and non-abrasive powders. (for visible glossy surfaces).

We produce gratings

It is important to clean the grate from combustion products and soot, and then assemble all the elements into single design, maintaining the functionality of the unit. Many people simply cannot do this. If you have even the slightest doubt about own strength, not worth the risk. “One awkward” movement and the hood can turn into a pile of metal, so it’s better to play it safe and find an assistant.

Effective products in the fight against oily plaque

If the surface of the grate is covered with a layer of “old” fat, it is advisable to use more aggressive means:

The means described above make it possible with a high degree of probability to clean the hood of grease and any other combustion products and condensate. Available for sale a wide range of cleaning compositions, including highly specialized ones aimed at kitchen units. But before using them, you should mandatory read the instructions.

How to easily clean grease from a kitchen hood

It is necessary to get rid of the main part of the “artifacts” mechanically. An ordinary knife copes with this task perfectly. Dry dirt can simply be cut off very carefully before cleaning the hood mesh chemical compounds, folk remedies.

We use mechanical force for cleaning

Once the desired effect has been achieved, the treated elements must be rinsed in water and dried. After this, you should evaluate how the item or element was cleaned, and whether any damage or defects occurred after such treatment. If the result satisfies you, the cleaned kitchen hood can be collected and fixed in its original place.

“Thorough cleaning” is recommended to be carried out at least once every 3-4 months. But the outer part of the body should be processed much more often. When answering the question of how to remove grease from the surface of a device, we recommend that you should under no circumstances use any iron scrapers or abrasive powders. Very often they leave deep scratches on the surface of a glossy coating.

Use a soft cloth to clean the glossy surface

It is necessary to understand that the decision on how to clean the kitchen hood and how often to carry out such activities with household units is made strictly individually. The answer to this pressing question directly depends on the availability of free time, dietary habits and even the temperament of the family. Some housewives cannot relax until they get rid of all the stains in the kitchen.

Where food is prepared must be perfectly clean. This applies not only to dishes and stoves, but also to the hood in the kitchen. This useful device helps get rid of unpleasant odor tobacco smoke and burning in the kitchen and throughout the apartment, which often accompany the cooking process. With these advantages, the hood tends to quickly become dirty and covered with plaque and greasy stains, so it is better to regularly clean the hood grille, body and motor from carbon deposits, soot and grease.

This must be done because large quantities contamination, the grill becomes clogged, the functionality of the device is significantly reduced, and unpleasant odors spread throughout the apartment.

The hood must be washed regularly, since the filtered air carries soot, dust and droplets of fat that settle on the grille.

How to clean a kitchen hood

Cleaning the hood should be carried out following certain rules and sequence of actions. The work is performed in this order:

• Disconnect the device from the network.
• Remove the filters (if they are disposable, make sure you have spare ones).
• Remove the air duct if required by design features. If it is impossible to disconnect it, limit yourself to cleaning the accessible part of the device.
• Wash the hood filter from grease or, if you have disposable filters, replace them with new ones.
• Clean the fan.
• Clean the filter grid.
• Wait until the washed parts dry completely.
• Reinstall all parts.
• Connect the hood to the network.

Remember to be careful when cleaning your hood and always unplug the appliance.

Cleaning the hood with detergents

In supermarkets you can find a huge amount of household chemicals that can remove even old dirt and are ideal for cleaning a kitchen hood.

When there is a lot of dirt and the hood parts have not been cleaned long time, improvised means may be ineffective. In such cases, it is impossible to do without the use of aggressive means.

The grease remover is applied as described in the instructions and distributed evenly over the surface of the grate. After some time has passed, usually 5-15 minutes, cleaning is carried out and the chemical is washed off with plenty of water using a sponge or cloth.

If you use strong chemicals, protect your respiratory system with a mask and your hands with rubber gloves. Open the windows to prevent the smell from spreading throughout the apartment, and only then start working.

• To avoid damaging the hood parts, test the selected product on a small area. If the chemical does not harm the surface, you can begin cleaning the entire part. Apply the product to the surface of the grate and leave for 5-7 minutes.
• After the aggressive substances have taken effect, clean the parts first with a brush and then wipe with a sponge. At the end of the work, you need to thoroughly wash off any remaining grease and chemical cleaner from the surfaces and dry the parts.

However, not every family can afford the purchase of an expensive product; moreover, some substances included in gels, sprays and powders are very toxic and can cause allergies. If for one reason or another you do not plan to purchase a chemical cleaning product, use folk recipes getting rid of fat.

How to clean the hood grille using folk remedies

In order to remove soot and greasy deposits from the grill at home, simple and inexpensive products that every housewife can find are suitable.

Laundry soap or dishwashing detergent

• Any of these products is dissolved in water, maintaining a ratio of 1:4.
• The hood parts are soaked in the resulting solution for 1-2 hours, after which they are doused with boiling water and washed with a sponge.
• You can reinstall the parts only after they are completely dry.

Baking soda

You can boil the dirty mesh and filters in a baking soda solution.

• Pour 1 cup of baking soda into a large container of water and place on fire.
• After the powder has dissolved, place the hood parts there and boil for 30 minutes.
• After this, all you have to do is rinse the grille under water.
• If small dirt still remains, remove it with a foam sponge.

Ammonia

This product will help wash away even the strongest and oldest stains, but if you decide to use this method, take care of respiratory protection by wearing a respirator. Open the windows in the room so that the acrid smell of ammonia does not spread throughout the apartment.

Salt

Add 1 cup to a large pot of water table salt and wait for complete dissolution. Heat the salt water, but do not bring it to a boil, and place the mesh in the hot solution for 30 minutes.

If soaking does not remove all dirt, wipe the parts with a sponge soaked in lemon juice or solution citric acid, prepared in a ratio of 1:3.

Table vinegar

When cleaning the hood parts with vinegar, be sure to use gloves, this will protect the skin of your hands from irritation.

• Soak a foam sponge in vinegar (do not take the essence!) and apply the product liberally to the contaminated parts of the hood. It will take 10-15 minutes for the fat to dissolve. After this time, remove any remaining vinegar and grease by rinsing the parts under water.

Lemon acid

• Prepare a concentrated solution of citric acid and apply it to the mesh and filters. It will take 15-20 minutes for the product to start working. After the greasy deposits have soaked and become soft, you need to clean the parts and rinse them in warm water.

If during the cleaning process you were not able to remove all the dirt, repeat the procedure again.

Cleaning external surfaces

The hood must be clean not only from the inside, but also from the outside. Not only greasy stains, but also dust remain on the surface of the device, which complicates the task and spoils appearance kitchens. In this case, it is unacceptable to use abrasive powders and hard sponges, as this can cause scratches on the surface. How easy it is to clean outer casing hoods?

• Dishwashing liquid is suitable for these purposes. Apply it to a cloth or foam sponge and rub the surfaces generously. Leave the product on for 30-40 minutes to soften the fat, then clean the body. Heavy soiling can be removed using a rubber scraper; this will not damage the surface.

After cleaning, remove any remaining product from the surface by wiping it with a clean, damp sponge.

Cleaning the hood with a steam cleaner

Most in a simple way To clean the grate, use a steam generator.

Those who are not yet planning such a purchase can use cleaning chemicals or folk remedies. And owners of dishwashers can easily cope with the problem of grease using this unit.

How often should you clean your kitchen hood?

The frequency of washing the hood parts depends on how intensively the owner uses it. gas stove. The more often the family cooks, the more often the hood is cleaned.

Lifehack

• If there is Dishwasher and the grate is the right size, you can wash it along with the dishes once a week. The metal grille of the hood is usually made of stainless steel, so such cleaning will not cause harm, but will save effort and time.

So that on aluminum or glass surface If the hood does not leave streaks, use window cleaner and a dry cloth.

With proper and timely care, the hood above kitchen stove will serve you for a long time and will prevent the spread of unpleasant odors from the kitchen throughout the apartment.