How to clean a gas stove easily and quickly. How to clean a gas stove at home

The stove is an indispensable attribute of every kitchen. During cooking, greasy spots form on its surface, which it is not always possible to eliminate immediately. Over time, carbon deposits form, which is very difficult to deal with without the use of detergents.

Cleaning rules

Cleaning the surface and the dirty grate of the gas stove can only be done after disconnecting the device from the gas supply. Always follow the safety rules.

Just one action to disconnect the device from the gas supply will eliminate the possibility of accidental gas supply, as well as protect you from possible injuries.

To clean the grate, you can use folk methods that have already stood the test of time. Many housewives were convinced of their effectiveness. The grate should be placed in a bath or basin, pre-filled hot water with the addition of laundry soap. To prepare a grate cleaning solution, you need to take 5 liters of water and one bar of 72% soap. It is necessary to choose such a container so that the grate is completely immersed in the prepared solution.

The gas stove must have burners and electric ignition. They are also subject to accumulation of dirt and grease. If these elements are of a removable type, then they should be removed from the stove and also immersed in a soap solution for high-quality cleaning.

Contaminated items should be soaked for several days. After this procedure, washing off grease and dirt will be easier.

Handles and hard-to-reach places require special cleaners. If the gas stove is equipped with an oven, then be sure to clean its external surfaces and internal parts.

Facilities

Eliminate fat and various kinds pollution will help both folk remedies and special detergents purchased in stores. Folk methods are less effective and require more time and effort to thoroughly clean the gas stove. Using household chemicals you should be very careful in terms of safety so that it does not get into food in the future.

Folk

If desired, you can use self-prepared products to remove fat from a gas stove. Folk methods are chosen by those who prefer safe and proven methods and do not like to use synthetic household chemicals.

Clean the stove folk remedies everyone can, because all the components are always at hand. Household chemicals are not in demand because they can cause allergies, are unsafe to use, and all actions must be carried out with rubber gloves to protect the skin of the hands from various kinds of damage.

Household chemicals

Modern manufacturers of household chemicals offer wide range of products that allow you to quickly and easily remove even stubborn dirt and a large layer of fat.

All cleaning products can be divided into three groups:

• Abrasive means are presented in the form of powders containing abrasive particles. They have a wide price range. They must be evenly applied to the surface of the plate and left for 30 minutes, then, using a brush or napkin, it cleans the surface. Next, you need to thoroughly wash it until eliminated. detergent. This option is ideal for removing stains from stainless steel and is strictly prohibited for enamelled cookers.
• detergents means are represented by gels, creams, foams and pastes. Gels and creams include microbeads that act as an abrasive but are very gentle and also have a pleasant scent. They should be applied to a wet surface and wait half an hour to dissolve any kind of contaminants. Foam or paste is ideal for cleaning vertical surfaces, they are characterized by efficiency and softness. Pasta - more economical option than foam.
• Fat dissolvers made in the form of sprays. They are ideal for cleaning burner lids and grates. It should be sprayed onto contaminated elements, left for a certain time indicated by the manufacturer, and rinsed with water. Cleaning should only be done with gloves. It is worth paying attention to the composition of the spray, since some are designed specifically to eliminate soot, so it is quite difficult to wash off.

Remove grease and burnt spots

To eliminate greasy and burnt stains, it is necessary to preliminary training. To soften old stains, use hot water and baking soda. The surface of the plate must be moistened with hot water and sprinkled with soda. After half an hour, you can begin to clean the surface of grease and burnt spots.

To remove soda, it is worth giving preference soft sponge. Experts do not recommend using metal washcloths. To clean hard-to-reach places, you can use an old toothbrush or cotton swabs.

This cleaning option can be used for the stove and oven. It is better to clean the inner walls with a soapy solution that you can make yourself.

Excellent tool to remove burnt spots the use of solutions with the addition citric acid, juice or vinegar essence. These funds can be used both separately and together. A great solution is a combination of vinegar and ammonia solution. It is strong and effective in combating burnt spots and thick fat.

The choice of agent largely depends on the surface to be cleaned. Some products are gentle, while others are very powerful, so they are only suitable for certain surfaces.

On glass

Many modern stoves have a glass-ceramic hob that requires gentle care. The surface of the plate must be moistened with a soft sponge.

Creamy products should be used, as they are characterized by a mild effect.

The product must be applied to the surface and wait a bit. If dirt remains after wiping the surface, then you can use a special scraper. This tool will allow you to easily remove burnt residues. After removing dirt, the glass surface should be wiped with a clean sponge, and then again with a soft towel.

Baking soda can be used to remove stubborn stains. It is safe for glass, so it is in demand. It is necessary to wet the soda a little before using, and then treat it with dried spots and leave for a few minutes. After, the surface of the plate must be washed with water, removing all the remnants of soda.

To enhance the effect of soda, you can add one more drop of lemon juice or vinegar. The interaction of these substances helps to quickly cope with strong soot.

To eliminate stains on glass, you can use not only folk methods, but also chemical creams and liquids. But you should be careful when choosing household chemicals, since some products contain potent alkalis and acids, which can adversely affect glass surface.

Before using a particular product, you must read the manufacturer's instructions. All actions must be performed with rubber gloves.

Another way to remove stains on a glass surface is to melamine sponge. It must be moistened with water and wipe the contaminated places on the surface. After cleaning, rinse the panel with water and dry with a dry towel.

On the electric stove

All heating elements they are not disassembled in a metal case, therefore such a stove is distinguished by the accumulation of fat around the burners. To quickly clean electric stove at home, you need to perform a certain series of actions:

• Wait for all the heating elements of the stove to cool down.
• Remember that the electric stove must be disconnected from the power supply. Safety measures must come first.
• The cleaning agent must be carefully applied to the surface, wait for the fat to dissolve and wipe the coating with wet wipes.

To thoroughly remove greasy and burnt spots around the heating parts, you can use a wooden skewer or a toothpick.

on metal

Many modern cookers have a stainless steel hob. Such a gas stove looks impressive and beautiful in the kitchen. But even minor streaks and stains are very noticeable on the stainless steel surface.

To wash a metal surface from old fat, you must adhere to the following rules:

• Contaminants must be removed from the surface immediately. No need to wait for a burnt spot to form.
• To remove dirt, you will need a sponge and any anti-grease or dishwashing detergent.
• Soda-soap solution will help to clean the cooking surface from metal. It must be applied to the dirt, left for half an hour and rinsed thoroughly with water.

On ceramics

To clean stubborn stains on the ceramic coating, you can use a special scraper or a plastic spoon. With their help, you can get rid of both fat and burnt spots, but the actions must be performed carefully and slowly.

When using a spoon, it should be held at an angle of 30 degrees. Applying force may scratch the ceramic coating. Remaining stains can be easily removed using detergent and a soft sponge.

For elimination strong soot you can use another method. Need to take olive oil and pour a few drops on the stain, then leave for 20 minutes. Thanks to the use of oil, cleaning the surface will be much easier.

If the above tools and means are not at hand, then with fat lemon juice, vinegar and soda will help to cope. To prepare a cleanser, you need to take baking soda and mix with a small amount of water until a mushy appearance forms. Apply the product to the stains and leave for 20 minutes.

Care must be taken not to let the baking soda dry on the surface, as this may damage the ceramic coating. After 20 minutes, remove the soda with a damp cloth.

If you use vinegar, then it must be mixed with water in equal proportions. Rub the stain gently with this product. Vinegar has both cleansing and disinfecting properties. After its application, there are no streaks left on ceramics.

Removing soot from the grate

The most difficult part of the stove is the grate, because it is on it that a thick layer of fat accumulates. When choosing a method for cleaning it, it is necessary to build on the fact that What material is it made from?

• Cast iron grate must be ignited. To do this, you can use the oven, gas stove or blowtorch. Using a metal sponge, thoroughly clean the rods.
• A dishwasher can be used to clean stainless steel or enamelled grates. It is necessary to select a program using high temperature water.

In the absence of a dishwasher, the grate should be dipped into a container of hot water, after adding not a large number of detergent. To prepare the solution, you will need soap, vinegar and soda. The product must be soaked for 12 hours so that the fat is well soaked. After that, dirt must be removed with an iron brush.

Effective ways to clean a heavily soiled grate:

• Warm sand allows you to remove various contaminants, but the cleaning process takes a long time.
• Dry mustard is applied to the rods, left for several hours, and then washed off with water.
• Car engine cleaner does a great job of removing grease. After using it, rinse the grate thoroughly.

How to wash burners?

Cleaning is not only outer surface stove, but also a burner. It consists of three parts: protective cover, flame spreader and nozzle or jet. Not everyone can do a complete cleaning of the burner.

First you need to disassemble the burner, remove all parts for thorough cleaning. Burners are easy to clean with a toothbrush and soapy water.

Burners are usually made of aluminum, so when choosing a cleaning agent, you should use options that do not contain acids and chlorine. Soaking is strictly prohibited.

To clean the nozzle, be sure to turn off the gas supply. If the holes are clogged with food debris or grease, then a metal wire can be used. You can do this procedure yourself or call a specialist.

How to clean handles?

Gas stove handles always accumulate a large amount of grease. Usually, dirt accumulates in the most inaccessible places, so we should talk about their cleaning in more detail.

The ideal solution will remove the handles. This must be done according to the instructions for the gas stove. If the handles can be removed, then you can use the same methods to clean them as for the grate. It is necessary to draw water into the container and dissolve in it laundry soap.Handles should be soaked for half an hour to simplify the cleaning process.

Another option - per liter of water will require 2 tbsp. spoons of vinegar essence. For this method, it is necessary to wear gloves for reliable protection hand skin. Handles should be placed in the prepared solution and put on fire. You need to boil them for about 5 minutes, then drain the solution and wait for them to dry naturally.

If the handles are not removed from the stove, then you should use cotton swabs, toothpicks, an old toothbrush. For easy removal of dirt, it is worth using ammonia or soda ash or food grade. First you need to moisten the surface and sprinkle with soda. This is enough to remove fat. But if this does not help to eliminate severe pollution, then you can use cotton swabs and ammonia.

Any hostess sooner or later faces the problem of contamination of the kitchen stove and she has to decide how to wash the stove from old grease and soot. Indeed, it is almost impossible to cook food without staining the hob. Water always splashes out of pots, splashes of fat fly from pans, pieces of food fall on the oven and burn. To clear kitchen appliance, can buy chemicals or use folk methods.

Do not start washing the surface of the stove until it has completely cooled down. This is fraught with burns. And if your oven is gas, then hot burners can damage the tabletops on which you put them. Always protect your hands with rubber gloves.

How to clean a dirty enamel stove

Enamelled stoves were the most common some 20-30 years ago. They may have different colour enamels are quite durable, easy to use and easy to operate. The oven can be washed with detergents, cleaning products, soda. In this case, use various kinds of sponges and rags, iron washcloths.

Rules for washing the stove itself:

1. It is recommended to fill the surface with detergent or cleaning powder diluted with water or soda solution and leave for up to 20 minutes to soak the fat;
2. After the time has elapsed, wash everything with a sponge, carefully paying attention to especially dirty places near burners or electric pancakes.

How to clean a stainless steel oven

The stainless metal finish looks prettier than regular painted enamel. This material is stronger, which means that the oven will be more resistant to any mechanical actions. The only drawback in its operation is the stains and stains remaining on the surface. That is, when washing with it, you need to handle it extremely delicately. Such an oven cannot be washed in a circular motion. And after cleaning, it is worth wiping it dry well, preferably with a cotton cloth. If, nevertheless, divorces could not be avoided, a slice of lemon will help. It needs to wipe the steel surface and wipe it thoroughly with a soft cloth.

The washing rules for this type of stove are the same as in the case of enamelled ones.

If your stove is gas, then in addition to the surface itself, you need to pay special attention to the burners, grate and handles.

Rules for washing burners.

Even if, at first glance, it is not clear that the burners are dirty, they still collect a large amount of fat and soot. In order to get rid of unpleasant accumulations, it is recommended to put them in a soapy solution for a while, then rinse in water, wipe dry and put in place.

Rules for washing grates.

Depending on the material from which the grate is made, there are some differences in their cleaning.

• Cast iron grates cannot be cleaned with water. In order to remove the accumulated fumes from them, they need to be calcined, for example, over gas or a fire. It is not recommended to use knives to scrape off soot from a cast-iron grate, this is fraught with damage to the material from which it is made.
• Enameled construction can be soaked in soapy water or wash in dishwasher. Their smooth surface is easy and quick to clean, but, as with cast iron, a knife should not be used to avoid scratches and damage.
• Stainless steel grates are generally well washed with cleaners and detergents, but for the best effect, they are soaked for a couple of hours (or better overnight) in water with chemical compounds then rinsed and dried.

The following folk remedies will help to wash the grate from soot and fat:

• A solution of vinegar with soda 2: 1;
• Dry mustard left on steel and enamel elements for a couple of hours;
• Warm sand, which should be carefully rub the grate.

After washing the grates, before them further use wipe them dry well, because grease particles adhere very quickly to wet materials.

Hand washing rules.

It is more convenient to wash the handles that are removed. You can do with them, as with the burners, putting the fat soaked in a soapy solution. A mixture of lemon juice and soda or vinegar and soda, diluted 1:1 ammonia with water, or regular laundry detergent will also help. Handles that are not removable can be cleaned with a toothbrush, toothpicks or ear sticks will help in particularly hard-to-reach places.

Methods for cleaning glass-ceramic and induction cookers

Now more and more housewives are choosing for themselves newfangled, well-fitting into any interior, beautiful and easy-to-use ceramic and induction cookers. They have a smooth surface, care for them is faster and easier, but still, there are some nuances in this process.

For this type of stove, there are special detergents and sponges. They can be found in specialized stores, purchased immediately with the purchase of the oven itself, ordered at service centers service. Do not use a rag for the stove with which you wash other surfaces or dishes, as in this case, you cannot avoid streaks. A sponge or cloth (special or regular) should only be used for the hob.

Do not use abrasive cleaners as they will easily scratch and damage the panel. Naturally, it is not advisable to use knives or steel wool to remove burnt food. To do this, there are special scrapers with which you should carefully pry off the edges of burnt food and try to remove it from the surface. If this fails and something sticks very strongly to the stove, then for a while you can pour on this place vegetable oil. It will help loosen stuck particles.

Specialized detergents: rags, sponges and scrapers for glass ceramics are not cheap, but it’s still better to spend money and use them once to extend the life of the device and for the high-quality performance of the heating process. Professional products remove not only grease and stains, but also limescale. In addition, after their use, the panel is formed thin layer protective silicone film, which serves additional protection surfaces from damage and helps to reduce the subsequent cleaning time of the plate.

If the products intended for this type of furnace were not at hand, you can use a liquid for washing glasses. It should be applied for a few minutes, let the dirt soak, then clean everything dry with a sponge or paper towel. You can also make a paste of baking soda and water, leave it on the surface for a while, then wash everything clean. The soda particles in the solution are very small, so they cannot scratch the coatings. Along with this, baking soda will help get rid of the unpleasant odors of cooked or burnt food. Vinegar also has a good deodorizing property. You can dissolve it in water 1: 1, and wipe the oven with this composition. It's a good way to get rid of bad smell, bacteria, germs and fat residues without leaving any traces.

Tips for operating glass-ceramic and induction cookers:

1. To avoid burning food, always check that there are no food residues on the stove before switching it on.
2. Do not use steel wool, chemical abrasives, sharp objects that are not intended for this type of coating. They all worsen qualitative characteristic cooking surfaces.
3. Try to clean your oven after every use.
4. Never place plastic items on the stove. If the oven is hot, they will quickly melt, stick to the surface and ruin it.
5. Use specially designed cookware for this type of hob. This will help prevent scratches on the hob.
6. Cookware not designed for glass ceramics may not have a perfectly smooth bottom surface, therefore, in order to avoid damage to the material, do not move it along the appliance panel.

That's all the simple tips on how to keep the stove in a clean, usable condition. Take note of them, and may they be useful to you.

It's nice when the aroma of freshly prepared food hovers in the house, cabbage soup smokes, cutlets sizzle in oil, pies are baked. But after each cooking, not only a mountain of dishes remains, but also an unwashed stove. It’s good when the hostess has enough time to wash it immediately after cooking, but more often her hands reach her after some time, when it becomes difficult to wash the fat and runaway food.

How to care for tiles made of different materials

Plates are currently made from various materials, and each cooking surface requires a special approach to cleaning.

enameled plate

The enameled surface is considered the most durable and easy to use. This is reliable material on affordable price. The metal base is covered with enamel in various colors, which can be easily cleaned with gel-like and liquid cleaners that do not contain abrasive substances.
The following tools will help clean the enameled surface:

• Gel for washing dishes, they rub the wetted surface and leave for 15-30 minutes. After that, these places are rubbed with a sponge, the remnants of soot are easily removed with a sheet of paper. The surface is wiped dry with a dry cloth;
• For heavy soiling, a creamy mixture of soda and water is used. It is applied to the places of pollution, then the soot is processed aqueous solution ammonia (for 1 liter of water - 1 small spoonful of alcohol). The surface is washed and wiped dry;
• The composition of the glass works well cold water, 30 g of any washing powder, ½ cup of soda ash and ¼ bottle of stationery glue. Pour the liquid over the hob and leave for 15-20 minutes. Nagar will go away without problems.

The enameled surface does not tolerate abrasive substances and acid-containing products. It should not be rubbed with coarse metal brushes.

stainless steel

These plates organically fit into any interior, they are easy to clean unlike enameled appliances, but require constant attention and care, since the slightest contamination is immediately visible on the surface. Because of this, a stainless steel stove often looks untidy.

• In order for this technique to always please the eye, it should be washed every day using detergents and a soft sponge. They easily remove burnt food residues, grease and other contaminants. Then the surface is wiped with a soft cloth;
• To clean, you can use a slice of lemon, then wipe with a dry cloth. It is possible to use a glass cleaner, it is used after the main cleansing in order to avoid the appearance of streaks;
• Dark spots and soot are cleaned with cleaning gels or creams. A microfiber cloth is used for application. Be sure to wipe dry after cleaning. After cleaning, a special oil for stainless steel should be applied to the surface.

It is rubbed over the surface, resulting in the formation protective layer, which protects the plate from moisture. Do not use abrasive, bleaching cleaners, brushes and rough sponges to care for such a stove.
Advice! Wipe the stainless steel plate with point movements so that there are no streaks left.

Glass-ceramic stoves

It's beautiful hobs that have an elegant look. Design and decoration can be different, the smooth surface is easy to clean. But dirt should be removed immediately after preparation, so that they do not have time to dry.

• Burnt food is scraped off with a scraper. After the surface has completely cooled down with a sponge, apply special remedy for glass ceramics. Leave the product on the surface for up to half an hour, then wash off the dirt and wipe it dry;
• It should be noted that you need to have a separate sponge for cleaning the stove. If the product is not at hand, it can easily be replaced by ordinary baking soda, which should be diluted with water to the consistency of a cream. Soot spots are lubricated with the composition for half an hour, then washed off with clean water;
• The accumulated soot is removed with soda slurry with the addition of a drop of vinegar or lemon juice, the resulting reaction will allow you to remove even complex contaminants;
• If it was not possible to remove the carbon deposits in time and the spots dried up, they can be smeared sunflower oil, cover with a damp cloth and leave for 10-15 minutes. The soot will be easier to clean.

In order not to bring the stove to an unpleasant state, before cooking, you should make sure that there are no remnants of food that has escaped earlier on the surface, otherwise it will burn and it will be more difficult to clean.

Use abrasive products for cleaning, brushes are not worth it, so as not to damage the plate. Dishwashing detergents are also not suitable, they spoil the glass ceramics, change the color of the surface. A special cream has protective properties, it washes well even sugar syrup, which is most dangerous for glass ceramics.

Induction cookers are a type of glass-ceramic hobs, but their operation is based on electromagnetic heating of dishes. Free zones are not heated. Their care is simple, you can use cleaning products suitable for glass ceramics.

Care of removable and non-removable hob parts

When washing the stove, do not disregard glass lids, burner handles, metal grates.

• Removable switches can be separated, put in a soapy solution for a while, to make it easier to clean them from dirt, grease and deposits. The solution can be prepared from hot water, soap or powder. Special attention to the places where the metal part of the handles is connected to the stove. Places that are difficult to reach can be treated with an old toothbrush, cotton swabs or toothpicks.

With severe contamination of removable elements, it makes sense to soak them in a soda solution. A mixture of baking soda and vinegar will also help, lemon juice or ammonia, diluted with water in a ratio of 1: 1. You can soak the removable elements in water with diluted detergent.
A vinegar solution cleans removable handles well. They are placed in a saucepan, 250 ml of vinegar is dissolved in a liter of water, the container is heated over a fire, boiled for 10 minutes and drained. After cooling, the regulators are wiped dry.

• Working with non-removable handles is somewhat more difficult. They are capitally attached, and it is difficult to clean from the inside. But on the outside, they should be cleaned with a cotton pad, toothbrush or cotton swab. For cleansing, improvised means are used - ammonia, diluted with water 1: 1, lemon juice with soda.
• Dirt, grease, soot accumulate on the glass lid, which covers the stove. You need to get rid of them in a timely manner, for glass an aerosol is used to cleanse fat, after a few minutes you can wash off the product warm water. In order not to run this surface, after cooking, it is enough to wipe it with a damp cloth.
• Before cleaning the grate, you should determine the material from which it is made. In any case, this element will have to be pretty tricky. Many housewives put off cleaning the grate until later, this leads to even more severe pollution, which becomes difficult to get rid of. A thick layer of fat and soot on it looks very unattractive.

Cast iron grates are the most difficult to clean, as water and cleaning products cannot be washed off. Cast iron requires calcination, this can be done over a gas stove, in an oven, or in an area over an open fire. Men can clean it blowtorch. From the cast-iron grate, do not clean deposits and fat with sharp objects, they can damage the metal.

Enameled grills are easier to clean and can even be washed in dishwasher. An easier way to clean is to soak it in soapy water and then work with a soft sponge with soda. It is not recommended to clean the enamel with hard objects, so as not to damage it.
The stainless steel grate is cleaned with ordinary soapy water. It is placed in the bathroom and poured with warm water. You can clean this material with dishwashing detergent, the grate is placed on an oilcloth, treated with a liquid or gel and left overnight. Wash it off with warm water in the morning.

You can use improvised means - soda and vinegar, a car cleaner. Enameled and stainless steel grate can be effectively cleaned with dry mustard.

It is worth remembering that all manipulations must be performed with gloves to protect the skin of the hands. All these methods are effective and bring good result, allowing cooker shine clean!

Every housewife is faced with the problems of washing and cleaning work surfaces and stoves in the kitchen. There are many different cleaning products on the market, but there is not always time and money to run and buy them. And there is no guarantee that they will really help. Therefore, let's try to figure out how to wash the stove from fat at home without using purchased cleaning products.

Plates are different and with different coating: enamel, glass-ceramic, stainless steel. Depending on this, there are nuances for cleansing. For example, an enameled plate cannot be scraped off with metal sponges so that there are no scratches. However, the cleaning methods discussed below will work on all surfaces.

How to clean the stove from grease

The most important thing in cleaning is a timely response to pollution. No need to wait until the fat dries and hardens from the temperature of the hob.

If there are greasy stains on the stove after cooking, you should immediately wipe them with a damp sponge.

However, it happens that there is no desire to move hot pans and pots to wipe the surface, or we simply forget about it from fatigue. Then we begin to think about how to wash the tiles in the kitchen from fat. Means proven by our grandmothers can always come to the rescue:

• baking soda,
• vinegar,
• lemon and lemon juice
• dishwashing liquid,
• mustard powder,
• salt,
• ammonia.

How to clean a very dirty stove

How to wash the stove in the kitchen from fat with folk remedies

★ How to wash a gas stove from carbon deposits WITHOUT DETERGENTS

To begin with, if the fat is not very old, you just need to apply dishwashing detergent to a wet sponge, lather a little and, squeezing the sponge, rub it over the dirt. Leave the plate to soak for 10-15 minutes, then rinse with water and wipe dry.

In cases where fatty contamination is significant and stale, then we apply vinegar from a sprayer or directly from a bottle in small portions onto the hob, distributing it over soot or the entire stove.

Let's stand like this for 15-20 minutes. The fat should sour and then wipe off easily. The same can be done using lemon and lemon juice: squeeze lemon juice on a greasy place, rub with a slice of lemon and leave for a while.

You can also clean the stove from grease by treating the contamination with a slurry of soda or salt and water.

Salt should be used extra, the smallest, so as not to damage the tile coating. There is a way to clean the stove with ammonia (ammonia-anise drops) or its solution (a teaspoon in a glass of water). We apply the solution to the contamination, wait 10-15 minutes, rinse with water and wipe dry.

How to clean fat tiles in the kitchen if the fat is old

For the old and the plentiful greasy spots it is recommended to apply over a surface treated with vinegar or lemon juice baking soda. There will be a reaction between the alkali and the acid, which will help to cope with the old fat. When using this option, it is necessary to give time to the reagents for exposure - 10-15 minutes.

Dry mustard (mustard powder) has proven itself well in the fight against fat. It is necessary to apply mustard gruel to contamination for 20 minutes, then rub a little and rinse everything with water. For very heavy pollution you can use refined gasoline. Apply to oily spots, wait 10 minutes, rinse.

How to clean burners, switches and grates on the stove from soot

For the cleaning gas burners you need to remove them and put in a foamed solution of dishwashing detergent and water for 20 minutes, then rub with the rough side of the sponge, rinse with water and wipe dry. You can use a slurry of soda and water for cleaning.

To remove dirt from the switches on the stove, it is best to use cotton swabs or cotton pads dipped in ammonia or ammonia-anise drops.

It copes well with greasy dirt on switches and soda gruel. For hard-to-reach places, it is convenient to use an old toothbrush. It is good to put grates from the hob in a large container or bathroom and pour hot water with dishwashing detergent for an hour or even overnight.

You can also use dry mustard or warm sand. It is important to know that before cleaning the stove from grease at home, the stove must be cooled down so that the coating does not crack from cold cleaning agents and so as not to burn yourself.

It's good when the house smells of pies, and hot cabbage soup is smoking on the stove, and delicious cutlets are fried. But the meal time passes, and the stove and oven need to be washed from greasy stains and runaway cereals. How to do this quickly, efficiently, with little effort, time and with the least damage to the surface of the plate?

Features of caring for plates made of different materials

It is not so easy to choose a stove for cooking in our time: your eyes run wide. Gas, electric, combined, built-in and freestanding. Hobs plates are also quite diverse.

• Enameled - for such plates metal base the surface is covered with enamel of various colors: white, beige, brown, etc. In the past, the most common type of coverage and almost the only one. Differs in enviable durability, reliability, easy operation and reasonable price.
• Made of stainless steel - looks better in modern interior compared to enameled surfaces, impact-resistant, relatively easy to clean from dirt, including soot. But, unfortunately, they require constant special care, because the slightest touch leaves untidy spots on such a surface.
• Glass-ceramic - beautiful, aesthetic and elegant hobs. Can be different designs and decoration. Differ in high thermal conductivity. The smooth surface makes it easy and quick care It's not hard to clean it up. A significant disadvantage is an high price and special dishes that do not scratch the surface.
• Induction. A type of glass ceramic. Based on electromagnetic, very fast heating of dishes. Virtually no heat free zones surfaces.

enameled plate

To clean the enameled surface, use products in gel form or liquid form containing no abrasives.

1. Apply dishwashing gel to the soot stains and leave it for a while. Then sponge them carefully with a sponge. Blot the rest with paper and wipe dry.
2. Make a cream paste with baking soda and water. Apply to soiled areas to clean the stove. Dilute 1 tsp in 1 liter of water. ammonia and the resulting solution, treat the stains, then wipe the surface dry.
3. 3 tbsp soda ash, 1 tsp washing powder and 1 tbsp. Stir stationery glue in a glass of cold water. Pour the solution over the surface of the plate for 10-15 minutes. Nagar leaves without the slightest effort.
4. Handles, burners and other removable parts can be soaked in soapy water for a while, then washed thoroughly with a sponge. Hard to reach places clean with an old toothbrush.

When cleaning enameled surfaces, do not use acid-containing and abrasive products, as well as metal and other hard sponges.

Stainless steel plate

The stainless steel plate must be wiped not with circular, but with point movements in order to avoid strong streaks. It is best to use a thick soda solution, as when cleaning enameled plates. Finish off by spraying glass cleaner onto the hob and wiping dry with a microfiber cloth. This will help wash the stains obtained during cleaning.

Can also be wiped after cleaning metal surface lemon wedge and then with a soft sponge. Thanks to the lemon essence, there will be no streaks left, and the stove will be fragrant with a lemon aroma.

Stainless steel should not be cleaned with harsh chemicals, bleaches or abrasives.

Induction hobs and glass ceramic hobs

Burnt food residues and grease splashes from glass-ceramic surfaces must be removed while the stains are not yet dry and can be easily eliminated.

1. Initially, with a scraper, you need to carefully cut off the protruding parts of the burnt food, if any.
2. Wait until the stove has cooled down and only then continue cleaning.
3. Sponge on an already cold surface, apply a special detergent for glass ceramics and leave for a while. Please note that rags and sponges for such stoves should not be used to wash other kitchen surfaces, otherwise visible stains cannot be avoided.
4. After the active ingredients of the detergent have dissolved the dirt, rinse off the residue and dry the hob with a clean cloth.

If the necessary detergent is not at hand, you can use ordinary soda. Apply a paste of baking soda and water to the soot spots for 30 minutes and then rinse well. To avoid streaks, carefully rub the surface with a special cloth.

If, nevertheless, the stain has time to dry, then pre-treat it with olive or sunflower oil, or simply cover the stain with a wet sponge to soften the surface of the soot.

Follow some tips for your glass ceramic hob always kept clean.

• before turning on the appliance, check for food residues that have not been cleaned before to avoid burning them;
• do not use abrasive materials for cleaning, so as not to damage the delicate surface;
• the more often you clean your stove, the easier it will be to bring it to the desired state;
• do not place on the stove plastic utensils: if you turn it on carelessly, it will melt and stick tightly to the surface.

Cleaning the oven

One of the most effective ways for this - hot soapy steam. To carry out the cleaning procedure, you must:

1. Pour water into a baking sheet that needs to be cleaned of soot.
2. Add liquid or crushed soap to the water and place the baking sheet in the oven.
3. Soap the walls of the oven with part of the solution.
4. Close the door, turn on the oven at a temperature of 130-150 degrees and boil water for half an hour.
5. Turn off the oven, let cool.
6. Open the oven and carefully wash all the walls, bottom, and baking sheet with a soapy sponge.

All surfaces after steaming should be easily and quickly cleaned of dirt.

Also, the oven can be cleaned with a mixture of vinegar, soap and baking soda, diluted to a thick homogeneous mass and lathered all surfaces of the oven. After you have left the solution for several hours, remove the soaked soot with a damp sponge.

You can use pure vinegar no less effectively by applying it for half an hour from a spray bottle to burnt fat.