home

Roll curtains with your own hands. Choosing the required material

It takes ~2 minutes to read

Every hostess dreams of changing the interior of her house from time to time. There are many ways to do this. The easiest and cheapest is to change the curtains. They can be purchased at any market or store. It will be easy to do this, since the choice of curtains is huge. But best solution will sew the curtains himself. Even those who have never sewed such products can easily cope with this task. How to do roller blinds you will learn with your own hands by reading the step-by-step instructions of the article to the end.

Disadvantages and advantages of such curtains

Advantages:

No light seeps through them, nothing can be seen through them, that is, no one can look into your window.
They can be hung anywhere.
They take up little space.
Fresh air passes through the roller blinds easily and freely.
These blinds are perfect for any room.
Rolshtora can be hung both independently and in addition to others.
Their selection is huge.

Disadvantages:

Roller blinds absorb bad smells.
They need to be constantly looked after.
After a while, they may warp.
The mechanism that raises the roller blind quickly fails.

How to sew roller blinds on plastic windows with your own hands

To sew a roll curtain with your own hands, you need to choose the right fabric. When choosing a fabric, it is necessary to consider that it is:

natural;
Moisture repellent;
Reflected light.

For the manufacture of roller blinds, you can use a fabric of the same color or multi-colored and with a pattern. It will depend only on you and your choice.

Making your own hands: step by step instructions (photo and video)

To make a roller blind with your own hands, you will need:

Textile.
Cord.
Rope.
Ribbon.
Weighting agent (metal or wood).
Rod shaft ( wooden beam or metal tube).
Screwdriver.
Self-tapping screws.
Drill.
Iron.
Sewing machine.
Fasteners.

Master Class

Determine the width of the roller blind. Measure the length of the roller and subtract one centimeter from the resulting length.
Now let's determine the length of the curtain. To do this, measure the distance from the roller to the window sill. Add twenty centimeters to the result.
Now make a curtain pattern. Measure on the fabric the width and length that you got when measuring. Cut out the resulting rectangle. There should be two such rectangular segments.
Fold the pieces with the right side inward and sew on three sides. Should be a bag.
Turn the resulting bag inside out and iron with an iron.
Let's move on to fixing the weighting agent. Its length should correspond to the width of the curtain. This is necessary so that the roller blinds do not hang on the plastic window. Fasten the weighting agent, tuck the fabric and sew, stepping back five millimeters from it.
Now we need to prepare the tapes. With their help, the curtain will hang in a folded state. From the fabric, cut a ribbon eight centimeters wide. And the length of the ribbon depends on the height of the window and is calculated using the following formula: 2 * the height of the window opening + 30.
Fold the resulting ribbon lengthwise, right side inward and sew. Then the tape must be turned out, ironed and sewn up the open side. Do-it-yourself roller blinds are ready.

Do-it-yourself mechanism for roller blinds

First option.

For the manufacture of the mechanism will need:

Staples;
Video clip;
Duct tape;
Screwdriver.

Manufacturing steps:

Let's start with brackets. If the curtain will be inside the frame, then the brackets are placed three centimeters below the top of the curtain. If the curtain is outside, then the brackets must be fixed five centimeters above the window opening. shackle with round hole installed with right side, and with a square hole - on the left side.
The distance between the staples should be the same as the length of the roller. If so, then fix the video.
Now we fix the curtain on the roller. Lay it face up, and position the roller at the top of the curtain. Wind the edge of the fabric around the roller and fix it with adhesive tape.
Throw the ribbons over the roller, and fix them in the center with a stapler.
Insert the curtain roller into the brackets. The roller blind for the plastic window is ready.

Second option.

For him you will need:

Bar.
Adhesive double-sided tape.
Glue gun.
Special mounts.
Cord and hooks.
Rails are wooden.
Weighting agent.

Manufacturing instructions:

First you need to cut wooden lath. Its length should be less than one centimeter of the width of the curtain.
Cover it with the same fabric from which the roller blind was sewn.
Glue double-sided sticky tape to the bottom of the bar.
On the reverse side the bar must be attached with special fasteners.
Insert the weighting agent into the stitched roller blind.
Attach the roller blind to the prepared cornice.
Take the cords, tie them up and lead them through special holes. Then line them up and tie a knot.

A video on the manufacture of curtains and a mechanism will help to cope with this task.

How to make with a garter belt

To make such a roller blind you will need:

the cloth;
sewing machine;
iron;
weighting agent;
bar and rail.

Manufacturing steps:

First you need to make a pattern from the fabric. Measure the desired width and length of the future curtain. Cut out the resulting rectangle and sew it on three sides. Turn the fabric inside out and iron it.
Insert the rail into the unstitched side, and then sew it up. This will be the bottom.
Attach the top of the roller blind to the bar.
Now prepare the ribbons. They should be twice as long as the roller blind itself. There should be two such tapes.
Attach the ribbon to the bar.
The roller blind is ready.

Do-it-yourself roller blinds

To make roller blinds you will need:

fabric for sewing;
paper template;
simple pencil;
bar of soap or chalk;
ruler;
adhesive pad;
fringe;
special glue for fabric.

Master class on their manufacture:

First you need to make a pattern. It is done in the same way as for ordinary roller blinds. But there is a difference - you need to leave an allowance of 25 centimeters. This is necessary for finishing the edge.
Now make a template. It is made from plain paper. Its width is equal to the height of the carved edge, and its length corresponds to the length of the roller minus one centimeter. On the resulting rectangle, make the pattern that you like.
The rectangle must be folded with an accordion. On the first strip, draw the desired pattern. Cut the rest of the strips along this pattern. So, the pattern will be the same across the entire width.
Make a coulisse. Insert a tube into it, and sew the edges.
Place the paper template under the drawstring and secure with pins. Circle the pattern with a piece of chalk.
Glue the fringe along the bottom edge.
Fix the resulting roller blinds on the roller.

Now you know how to make roller blinds with your own hands, as well as how to make roller blinds yourself without the help of a master. Good luck!

Photo gallery

We always pay attention to window decoration close attention, because it unique opportunity make the interior harmonious and complete in terms of design. One of the interesting and convenient ways decoration - roller blinds. You can also make them with your own hands by implementing a certain design in your home.

Roller blinds are widely used for window decoration in residential buildings and office space. Their popularity is due to several features:

they can be supplemented with curtains or used as an independent design of a window opening;
you can buy roller blinds for any type of window - plastic or wooden;
the curtains fit snugly against the glass, so it will not be visible from the street what is happening in the room;
ease of care and maintenance is the main trump card of these systems;
smart design protects against bright sun and can be used to darken the room;
a variety of design options - the ability to choose a design for the style features of a particular interior.

You can make such curtains yourself, or you can purchase roller blinds ready-made without drilling. Consider how to create curtains of this type with your own hands.

To make roller blinds, you will need to choose the right fabric - its design and patterns must be in harmony with the overall style of the interior. When choosing a fabric, pay attention to the following details:

First lesson

Roller blinds in the photo look very impressive. And if you consider that you can sew them yourself, you have a great chance to give the interior the style that you like. After choosing the fabric, you can start cutting:

You can also fix the canvas with a side cord. Ribbons of fabric are sewn to the upper edge of the curtains, which are threaded into plastic rings in advance. Then we take a decorative cord, fasten it to the bar from the side of the opening, pass it through the rings and fasten it to the wall.

Lesson two

The price of ready-made roller blinds is quite high, and therefore it is worth trying to sew them yourself. Moreover, this process is quite simple. It is important to make the correct measurements - the opening or the glass itself, if the curtain will be attached to it. From the materials we need:

The fabric is unfolded from the wrong side and sewn along the length and width, after which the resulting bag, as in the first lesson, is turned inside out. Turn the resulting bag inside out. We think over the location of the weighting agent - in a special pocket or inside the bag. Now we take a bar and wrap a fabric around it, fasten it with a stapler if a beam will be used as a frame, or hem it if we use a metal bar. Now we take the garters, throw them through the upper fasteners, fix them. We fix the timber in the window opening, and its upper part can be carefully decorated with a figured edge.

Lesson three

You can create opaque roller blinds in another way - simple, but original. This is just an imitation of curtains, as they will not rise or fall, but will become a reliable protection from the light. To create such designs, prepare:

The steps for tailoring roller blinds are as follows:

Features of blackout curtains

Blackout roller blinds are a good solution if you want to darken the room. The use of a special fabric, the reverse side of which is covered with acrylic, protects the room from light penetration by 100%. It is advisable to mount such structures in children's rooms and bedrooms or in rooms with windows facing the sunny side. Thanks to modern technology, blackout curtains allow you to control the flow of light and the heating of the room, which other canvases cannot provide. Features of Blackout opaque fabric include:

All types of Blackout fabrics differ in density, degree of opacity, color, pattern and the presence of a substrate. Due to its versatility, such designs will ideally complement any interior and fit under any window opening. The convenience of their operation is ensured by the presence of a weighting bar and side guides, due to which there are no possible side gaps, and when folded, the sheets are practically invisible on the window.

Cassette curtains

Cassette roller blinds attract attention because they are compact and fasten without drilling. Due to their tight fit to the window, they protect the room from the sun's rays. The presence of a cassette box in the design allows, if necessary, to remove the lamellas, masking the mechanism. Cassette blinds beautifully complement the windows in the kitchen or balcony, office space. A variety of color and texture solutions - the ability to emphasize the features of the interior. The advantages of cassette structures include convenient operation, reliability of the mechanism and ease of maintenance.

Today in choice matching curtains there is no problem for your home. You can buy any model, color; a variety of fabric types also gives room for imagination. But why not take the opportunity to sew such a product yourself? Roller blinds are very easy to make and can add a touch of class and style to any room, from the kitchen to the living room.

Features of curtains and suitable fabrics

Designers say that blinds are not the most the best way for residential areas, they are more suitable for office. These devices are being replaced by roller blinds, which are just as convenient to use, but at the same time cozy, looking at home. They are very easy to sew, and even easier to install.

Many people confuse roller blinds with Roman blinds, and even consider them the same. Yes, these products have a lot in common as in appearance, and in principle of fastening on the surface and the manufacturing process. Nevertheless, there is a significant difference between Roman and roller blinds. It consists in the following: in the first product, folding is ensured by sewn-in trims, according to the principle of an accordion; the second type of curtains is rolled up, there are no slats along the length of the curtain, which provide rigidity.

Installation of such a curtain can be done in three ways:

on the wall;
above the window
on the frame.

It is especially easy to fix such a curtain on a plastic window. Cassettes mounted on the frame do not interfere with work casement, and the U-shaped guide holds the fabric tightly, keeping it in a taut position.

The same guides can be on roller blinds attached to the wall. This installation option provides protection against drafts. The use of opaque materials creates the effect of complete blackout.

Roller blind: front and back view

Almost all materials can be used for roller blinds, but it is better to purchase a special fabric impregnated with antistatic or antibacterial composition. This is especially true for products that will be used in the kitchen or bathroom. According to the degree of transparency, these fabrics can be:

transparent;
translucent;
darkening.

The range of patterns and colors is unlimited.

The most popular roller blind fabric is polyester. Impregnation with antistatic prevents sticking of polyester to the canvas. You can choose material with a metallic tint or a soft pearly sheen.

For tailoring roller blinds, you can use any fabric

Teflon coated sheets are very easy to maintain due to their dirt and water repellency. There are also fabrics with fire protection.

Note! Real, high-quality impregnations that form a protective layer on the fabric are completely harmless to the body. In order not to buy a fake, ask the seller for the appropriate hygiene certificates.

Tailoring

In our master class, we will tell you how to sew a simple roller blind. This option does not require you high costs and special skills in tailoring.

Necessary materials

fabric cuts different kind or colors for the face and the wrong side - 2 pcs.
Wooden bars equal to the width of the window frame - 2 pcs. (for fastening the curtain and its weighting).
Scissors.
centimeter or ruler.
Cord.
Ring screws - 5 pcs.
Hook screws - 3 pcs.
Threads, needles, sewing machine.

Step-by-step instruction

Measure window frame. According to the calculations obtained from the prepared fabric, cut out two segments with the right size. Allow for seam allowances: 10 cm in length and 3 cm in width.
Sew two pieces of fabric from the inside. Leave one end unsewn, turn the product through it. Stitch the area, iron the curtain with an iron.
Choose which side the future curtain will be directed to the wall. This will be the front.
Place the product face down on flat surface. Sew "pockets" for the slats: fold the edges of the curtain 1.5 cm from the bottom, 3 cm from the top, stitch, insert the slats inside.
Sew the edges of the product and insert the trims
The top bar will serve to fix the product to the wall. Carefully screw two ring screws into it through the fabric from above, and two more screws from the front side. Step back 5 cm from one edge of the bar and screw another ring into it.
Screw rings into planks
In order for the roller blind to roll up, you need to attach a cord. Unwind and cut two cords. The length of one should be equal to three lengths of the curtain, the other - the same plus another 1/2 the length of the curtain.
Thread the cords into the rings on the fastening bar. Remember: a longer cord must be tied to a ring located farther from the common side ring.
Fasten the cords that will control the roll up of the curtain
Run the cords along the wrong side of the curtain, pass through the ring screws. Bring out through the common side loop, tie the cords together.

Roller blinds can be an interesting alternative to blinds, and craftswomen will be pleased with the opportunity to sew roller blinds with their own hands without special efforts. Such decorations are devoid of the pomposity of classic curtains, do an excellent job of sun protection and give the interior lightness.

Difference from Roman blinds

Quite often, roller blinds are confused with Roman blinds. And this is not surprising, because outwardly they are very similar (especially in open state). Distinctive feature these functional types window decorations - lifting mechanism. Roman ones rise with the help of a system of cords (chains) and form horizontal folds. Rolled - neatly wound onto special rods.

Roller blinds are easier to do with your own hands. For their manufacture does not require a lot of knowledge and skills, even a novice seamstress can do it.

Roller blinds look stylish and neat, do not take up much space

Benefits of sewing roller blinds

Roller blinds are stylish, interesting view which is suitable for almost any room. With their practicality and functionality, they are able to refresh the interior, bring a note of sophistication and originality.

To undeniable merits sewing this type of curtains include:

opportunity to use various materials, choose the option that is ideally suited to the created environment;
ease of execution - they are easily sewn and installed on windows of any type;
have a simple control mechanism.

Fabric choice

Various manufacturers offer a wide range of special fabrics for sewing rolled curtains with your own hands. Among them you can choose: transparent, natural, jacquard, with and without a pattern, for children. A special place is occupied by opaque materials Screen or Black-out, which will provide one hundred percent protection from sunlight and are perfect for creating cozy atmosphere in the bedrooms. For bathrooms you can choose polymer materials who are not afraid high humidity and temperature fluctuations.

The peculiarity of such special materials is the presence protective layers, providing increased resistance to fading, excellent antistatic properties, resistance to deformation.

Before using such fabrics, you should read the instructions for use (is it possible to wash; if so, at what temperatures; is dry cleaning indicated, etc.).

If you wish, you can also make roller blinds with your own hands from ordinary curtain fabrics or thick linen. Such materials will not provide high antistatic, dirt-repellent properties, but are cheaper.

Bright shades of fabric for roller blinds can bring positivity and dynamics to the interior.

Color solutions

When choosing the color of roller blinds, it is worth considering that they can be combined with common interior or become interesting color accents. By choosing a translucent fabric with an openwork pattern, you can get the effect stained glass windows. The illusion of foliage will be created by green fabrics with appropriate patterns. Stylish in modern interior models with a touch of metallic will look.

It is also important to consider the location of the room:

for northern windows it is better to choose warm, golden, pink, cream, pastel colors;
shades of cold range (gray, blue, blue) are more suitable for southern ones.

You should not choose a fabric to match the wallpaper: this way the windows will merge with the walls. It is desirable that the shade of the curtains is in harmony with the color of the upholstery of the furniture.

Scheme of sewing a roll structure

Making your own roller blinds

Before you start sewing such products, you should measure the window opening and take into account the method of fastening: on the cornice, in the window opening, on the frame.

In the first case, it is necessary to add about 10 cm to the measured width to ensure reliable protection from the sun's rays.

We offer several simple options self-manufacturing roller blinds, which differ in the method of fastening and the mechanism for raising the canvas.

Cutting and sewing fabric

To the dimensions obtained when measuring the window, when cutting, it should be added in width - 2.5 cm for allowances, in length - up to 15 cm for "pockets" and allowances.
Cut out two canvases (on the front and back side of the curtains). They can be from the same fabric or from different ones.

If the fabric is dense and there is no need for special light protection, then one canvas can be used.

Fold the fabric "face to face" and sew on three sides (from the inside!). Important!

If the window is large and it is necessary to sew two strips in the center, then you need to make sure that the seam falls on the frame cover. So it will be less noticeable.

Turn the fabric inside out, carefully sew up the remaining side and iron the seams.

Further actions depend on the method and mechanism of fastening.

Mounting on the eaves

In this case, do the following:

sew two “pockets” on the curtain: on the top - for the eaves rod, on the bottom - for the weighting (wooden or metal) rail. Next, sew plastic rings on top on both sides;
screw the hooks on the sides of the window opening from above. After that, you can hang and equip the mechanism for raising the curtains;
take two cords (one for three lengths finished model, the second - three lengths of the curtain and its width);
tie the end of the first cord to the hook, pass through the bottom of the product and thread through the ring;
fasten the second cord in the same way, but sequentially pass through both rings;
gather the cords together and fasten.

Lifting mechanism: when the cords are pulled, the curtain will wind up due to the counterweight.

Manufacturing roller blind do it yourself

Mounting on a beam

In this option, it is necessary to prepare a wooden beam, which will be attached from above to the window opening or to the frame. For greater aesthetics, it can be wrapped with a cloth, and then one part of the Velcro tape can be attached from below.

As in the previous case, a “pocket” for the weighting agent should be made from the bottom of the curtain. Sew the second part of the Velcro tape on top.

Fastening tapes are cut out and sewn separately. You can use ready-made decorative cords or ribbons, their length should be equal to two curtain lengths plus 15-20 cm.

Fasten this beam to the window, having previously passed the fastening tapes on both sides.

Roller blinds for plastic windows

It can be installed on a plastic window, directly on the frame. In this case, the lower weighting agent must be wooden. The top mount can be done with double-sided adhesive tape.

If you decide to make roller blinds with your own hands, do not be afraid to experiment. Connect your creativity. You can not only choose interesting material, but also try to combine various options the manufacture of such products.

First of all, let's look at the question of what it is - roller blinds. What are their advantages and disadvantages. Roller blinds are different type designs to limit penetrating light. They can consist of a different number of elements and materials. Be sure to have a mechanism for lowering and lifting. Installation and operation of roller blinds is very simple.

Designers often include them in their projects due to the high variety of colors and textures. Also roller blinds are ideal for plastic windows, which gives them an advantage in modern urban interiors.

Pros and cons of operation

The advantages of roller blinds are: big choice materials and textures suitable can be found for any style and room, including rooms with high humidity. They are easy in daily use due to the mechanical component.

In addition, this approach saves space - the window sill remains free. Also, a special approach to insolation of the room helps to save on expensive curtain fabric.

The mechanism is ideal when installing the system " Smart House» - roller blinds can be installed on the electric control. Big plus - easy self-installation. To maintain health and order, there are special solutions and impregnations of materials.

Also, the advantages include a huge variety of manufacturers of this product. Nowadays, the competition is very high: in addition to going to the store, you can use your own hands to create roller blinds or order them in an online store according to the sizes and components you need.

Besides maximum size canvases up to 3 meters is already a minus, since the height of the window also matters than more material used, the more difficult the operation of the mechanism itself. If the width of the window does not allow closing it with one sheet, gaps are inevitable. From constant friction, low wear-resistant, cheap materials quickly fail.

Step-by-step instructions for creating a fabric roller blind

A great option for window decoration - do-it-yourself roller blinds. Easy replacement of the fabric base allows for numerous variations of the interior transformation. Even more interesting is that you rely solely on your imagination.

We suggest considering three options for creating curtains on your own: with a rod - a shaft made of wood, with a roller located along the lower edge of the curtains, and making roller blinds from ready-made industrial parts.

Before starting work, it is better to wet and dry the fabric, decorate and stitch it so that it does not deform in the course of work. The width of the fabric is selected according to the width of the opening, plus or minus the allowances.

It is enough just to take the required footage of fabric for alteration: its length will be equal to the height of the window opening with the addition of 30 cm to hide the fastening, the width is selected according to the width of the window. The fabric can take twice as much, in the case of a single-sided print - two window widths plus a few centimeters for allowances.

The first option - with a bar with a bar shaft

A very easy-to-make method, we need: fabric, a pair of bars (shaft and weight), garters, centimeter tape, screws (hooks and rings), cutting tools. BUT detailed photos An example roller blind can be found on the Internet.

The sequence of actions is as follows. Pre-purchased according to calculations and accurate measurements, it is better to wash and iron the fabric before starting work. We sew from the wrong side in width and on both sides of the length of the curtain, so we get a bag, which we then turn out.

Gently stitch the raw edge, iron. We sew pockets by bending three centimeters to the edge from above, one and a half from below. The planks will then go there.

Kitchen Roller Blinds: Types, Sizes, Prices, Installation (Photos) regarding DIY Roller Blind - Goosengz

We screw two rings on the screws from the inside of the curtain. We retreat 6 cm on the front of the product and screw in another screw with ring fastening. We take the prepared garters, one of the elements is equal to the length of the curtain, multiplied by three, the second is three and a half lengths.

We tie the fasteners with rings, fasten the long garter on the fastener that was screwed in with the last one. We carry them along the inside out again, pass through the screw rings. We bring out through the side loop, tie. Our roller blind is ready!

To hang it, we screw more hooks and screws into the window frame opposite the hooks already on the curtain. Now you can hang the curtain! And for winding the cord, we use another hook. The whole job takes a couple of hours!

The second option is a roller at the bottom of the roller blind

We process the fabric on both sides. We form a pocket for the weighting agent at the bottom of the canvas. If the fabric is not double-sided, then we sew a bag according to the previous sample and iron it. The weighting agent will serve as a shaft mechanism.

If the fabric is printed on one side, then we sew the bag, turn it inside out and iron it. We hide the bar in the lower edge of the curtain. We spend a couple of millimeters upper edge with a back fold. Next, we work with Velcro / adhesive tape.

We sew one part of the fastening element to the curtain, we fasten the second to the bar near the stream with a stapler. We wrap the bar with a cloth, attaching a canvas to it. We make ties 25 cm plus length equal to the height windows multiplied by two.

We fasten the ties at the top bar with the same tool, symmetrically about the center of the product and in half relative to the total length. Fix the upper bar with a screwdriver and self-tapping screws.

The third option is creation with a base in the form of a finished structure

It happens that it is not possible to choose the curtains according to your desire or the materials you need are not available. Then your imagination comes into play, you can easily change the finished product to choose the right pattern or ornament.

For alteration, natural fabrics are more often chosen: cotton, rattan, possibly canvas. You need to be careful when attaching the web, a lot depends on how the winding will take place.

Then we take out the weighting agent from the cylinder, remove the original canvas. We add 2-3 cm to the length of the roll and get the value A. To get the value B, we take a value equal to the distance from the mount to the window sill plus 2-3 cm. with the help of an iron, we build.

We make a pocket along the bottom edge of the curtain, the weighting agent will be hidden there. We also bend one and a half cm, then five cm. We attach the curtain to the mechanism on a layer of glue, you can use double-sided tape.

With even fixation, the curtain rolls up and unwinds without problems. Place the curtain in finished mechanism, insert the weighting agent, the curtain is ready!

It is perhaps really difficult to make only a kind of day-night roller blinds, since in their functionality there are two canvases that shift relative to each other when twisted. The idea of such curtains allows for insolation through strips of translucent fabric, but in technical side it's quite difficult to do this when it's done.

Roller blind maintenance

Making or choosing roller blinds is only the beginning of their service. Fortunately, there are a great many examples and photographs of roller shutters on the Internet. It is also important to properly handle and care for them. However, it is very easy!

If necessary, cleaning the installation mechanism is removed, in almost any model. Thus, the structure is disassembled and perfectly cleaned.

If necessary, on the weighting agent, the fabric can be steamed to make it easier to remove. Then, according to the recommendations for a certain type of canvas, the fabric is cleaned, washed, ironed and placed back on the window frame. Roller blinds are unpretentious and always pleasing to the eye.