Inflatable mattress specifications. The best inflatable sofas

A mattress is an almost universal item. You can take it with you on a hike and install it in a tent, you can swim on it, and also use it at home instead of a permanent bed or only for guests. In order for the mattress to serve for a long time, it is necessary to pay attention to its correct choice.

How to choose the right swimming mattress

• it must have several sections. This was developed for safety: if on the water some section starts to deflate, then the rest will retain their integrity, and the product will stay afloat;
• valves should not be closed with plugs, but screwed. This provides greater reliability;
• screw valves will not open suddenly. This is especially important for children's products, as kids on the water are very active and do not always realize the degree of danger;
• the material of manufacture must be dense, since the mattress has to be in contact not only with water, but also with uneven ground, and also withstand the load of the human body;
• size depends on who uses it and personal preference. For children, it is better to take a narrow mattress, but if there is a need for a family swim, then they take wide models;
• pay attention to the manufacturer and reviews about it.

Attention! always check the product before launching.

How to choose the right air mattress for sleeping

There are several parameters to pay attention to:

• size. The mattress is single, one-and-a-half and double. When choosing a product, they are guided by the place where it will be located and the number of people who will use it. If you choose a mattress for a tent, then you should take into account its area. The mattress should not stick out, and also not be too narrow so that it is comfortable to sleep, and the tent itself is not damaged;
• material. The mattress must be durable, because it is subjected to strong and constant stress;
• thickness. If the product is chosen for sleeping, then it is better to take high models, not lower than 25 cm. This is not only convenient for the body, but also creates an additional air layer not to freeze;
• top and bottom material. It is preferable that the sleeping mattress has one side with soft coating. It creates additional heat and does not allow bed linen to roll;
• weight. If the product is taken with you on vacation, especially on hiking trips, then you should also pay attention to this parameter. Headrests and a built-in pump make the product heavier;
A high-quality mattress for sleeping for one person must withstand 120 kg, if it is double, then 200 kg;
• ribbing and the presence of partitions. These options allow you to make your sleep more comfortable. Also, if the mattress suddenly starts to deflate, it will not do it immediately and not completely. Partitions ensure that the body is kept in a comfortable position, without crushing the surface of the mattress;
• availability of additional options and accessories: carrying bag, built-in or external pump, removable backrest.

How to choose an inflatable sofa mattress

An inflatable sofa is a good alternative to the usual one. When choosing, they are guided by height - it should be comfortable to sit on it. Important size in width and disassembled. Pay attention to the maximum load. Inflatable sofas are transformers, they are easy to expand to get a wide bed. Some manufacturers also offer a corner option.

The top material must be durable. A soft flocked finish is preferred. You should pay attention to the valves. They should allow rapid inflation and deflation. The product must be accompanied by a pump and repair kit.

The main characteristics of the air mattress

In the shops big choice a wide variety of mattresses, they differ in parameters, but among them there is something in common.

Size

Standard Thickness from 13 to 25 cm. The air bed will be thicker - from 46 cm the size also affects the weight of the product, including when folded. This should be taken into account if the mattress is supposed to be taken with you on trips.

Material

Quality mattresses are made of PVC. They can be completely smooth, such products are designed for swimming, or with a flock (velvety) coating. Sometimes mattresses are made from cheap raw materials, similar to film. Such mattresses quickly fail and are unsafe, especially when used on water, as their reliability is low.

Structure

The single section mattress is easy to inflate but also deflates easily. It can be dangerous when using it on water. Therefore, mattresses should be purchased with at least two sections, and preferably several. They are more expensive, but more reliable and last much longer.

Color

This is where personal preference comes into play. Standard color is blue. You should not take a black mattress if you plan to relax on it on the beach - it will heat up very much. Transparent products are poorly visible on the water. For swimming, especially children, mattresses of noticeable shades should be taken.

Mattress pump

There are two types: built-in or separate. The pump must come with the kit and be suitable for a specific model. The advantages of an external pump are that if it breaks, the accessory can be replaced with another one. With built-in models, some difficulties can arise.

The pump can also be manual or electric. Manual universal, it will have to make efforts when pumping up, but it will work in nature. Electric is more expensive.

Important! if you take the mattress on trips, the electric pump must be able to be powered by the machine.

Storage bag

This accessory is a must, especially when traveling. The bag must be tight to prevent damage to the product during transportation.

repair kit

A mattress is a product that can be damaged by sharp objects, stones, or simply from time to time. For these purposes, you need a repair kit. Some manufacturers sell mattresses already with it. You can also buy a repair kit separately. Includes patch and glue.

What to look for when choosing a mattress

Rest and sleep should be comfortable, so you should not save on a mattress. There are models that additionally come with headrests or recesses for cupholders. This improves the comfort of use.

reference: Mattresses with a soft surface are comfortable and warmer. It is also better to take a ribbed product, it is more comfortable and reliable.

You should pay attention to the presence of a frame. It gives the mattress orthopedic properties. The type of assembly is also taken into account: manual and machine. The advantage should be given to the machine type, since such products are more reliable and last longer.

Pros and cons of air mattresses

Any product has its pros and cons, and air mattresses also have them.

Minuses:

• The need to inflate.
• Possibility of mechanical damage and deflation due to careless use.
• Not everyone is comfortable long time.
• In winter it is colder than regular bed.

Reputed manufacturers of air mattresses

The stores have a very large selection of these products, but some manufacturers, according to users, have high reliability and quality.

The most popular mattress brand Intex. They produce models of various sizes and types, are one of the leaders in the production of mattresses. As well as well-known brands - Camping, High Peak, Bestway.

When buying a mattress, focus on your own comfort. Of course, an inflatable product will not completely replace an orthopedic bed, but it can become an assistant on vacation and at home. Children enjoy spending time floating on a mattress, and it is safe if a reliable manufacturer is chosen. In hiking, this thing also has advantages, because even in a tent you want to sleep comfortably, without resting your back on uneven ground.

Basic rules of operation:

• do not jump on the mattress and do not stand on it - the internal partitions may break or burst the seams;
• inspect before launching;
• do not pump.

At correct operation and following the manufacturer's instructions, the mattress can last for several years.

How to choose an air mattress for sleeping

Inflatable mattress for swimming

First you need to understand what the product is made of. The main material is polyvinyl chloride, regardless of whether its surface is matte or glossy. In principle, here you can be guided only by your preference in color.

Before buying, it is better to inflate the product and see if the seams allow air to pass through. Ideally, you should leave the mattress for 3 hours, if it deflates, then it is pierced. In addition, a good product does not require additional pumping for 24 hours.

The most efficient models consist of several chambers. This is a safer option with which you will not drown. If one section deflates on the water, it will still stay afloat. The number of valves depends on the number of chambers. The valve itself should deflate only when pressed, this will also contribute to the safety of operation.

Always fill the mattress to 80% of its volume, in the heat the air expands and full inflation can cause damage. In addition, the convenience of the product is directly dependent on the size - the larger it is, the more stable it is on the water.

Inflatable sleeping mattress

Such models are often purchased for swimming, but this is not the best solution, leading to damage to the outer coating and welds. If you plan to sleep on a travel mattress, it's best to keep it out of the water. However, it is these samples that are most stable on sea waves, but then experts advise not to use them for a night's rest.

Compared to swimming counterparts, air mattresses for tourism and sleep are made on the basis of denser PVC. Pay attention to the valves, the most reliable of them are made of durable plastic and close quite tightly.

A useful addition would be a pump in the kit. It can be electric, manual and foot. Here you should focus on your own strengths and budget capabilities. There are models that can inflate themselves by unscrewing a special valve. However, in this case, you need to contact only trusted manufacturers, otherwise the inflation will only last a couple of times.

Several varieties are on sale:

• double;
• single;
• orthopedic.

With the first two varieties, everything is clear, but orthopedic samples are produced using cunning technology and are distinguished by a wavy shape. This gives an even distribution of the load and people with diseases of the spine can sleep on such a mattress.

Which air mattress is better: the nuances of choice

First, you should pay attention to the type of attachment. Solid can be distinguished by longitudinal stripes - this is more durable. Point fastening is made in the form of dimples, such a mattress will last less.

Check that there is a velvety vinyl or textile-based coating (jacquard, viscose) on top. This will give a certain anti-slip effect and comfort, which is especially important for sleep.

I note that any product has a load limit. For single models, the maximum is designed for 120 kg, for double models - 200 kg. Exceeding this threshold will cause a quick failure.

Large air mattresses

Double inflatable mattress for sleeping with a pump Intex Classic Downy Bed (68759)

Double air mattress, ideal for small apartments.

Mattresses from the manufacturer Intex have a velvety surface, made of thick rubber. The product itself is elastic and high. Available in 2 shades. It can only be inflated with a pump.

Depending on the level of pumping, the model can be soft or quite hard. Made from waterproof vinyl. Dimensions (LxWxH): 191x120x22 cm. In terms of the number of places, this is a one-and-a-half mattress equipped with longitudinal stiffening ribs. There is no pump in the package, as well as a special repair kit.

Among the advantages I would like to note the following:

• compact dimensions. The mattress does not take up too much space;
• an extra bed is provided;
• acceptable cost.

The mattress keeps low temperatures for a short time, but I advise you to keep it warm.

The cost of the mattress was 1400 rubles.

Bestway Flocked Air Bed (67004 BW)

The inflatable double mattress is suitable for use in hiking and outdoor recreation.

Upon purchase, a 1-year product warranty is provided.

Even after prolonged use, the mattress retains all its characteristics. In addition, it is quite large and can accommodate up to 4 people. It has reliable valves, and therefore inflates in a matter of minutes. Able to withstand a lot of weight, almost without losing rigidity. The edges do not bulge, the mattress itself is not pressed through.

Of the positive qualities I noted:

• comfort in use. The upper part of the product is made of flock. For this reason, he does not special care and is pleasant to the touch;
• convenient for storage and transportation. When folded, it takes up minimal space;
• strength. Special baffles in the form of glasses provide even more rigidity;
• durability.

I did not notice any particular minuses, but I would like to note that you should not fold and unfold the mattress on the street because of the risk of damage.

The cost of the mattress is 1500 rubles.

Air mattress with built-in pump Bestway Aerolax Air Bed (67462 BW)

The kit includes a built-in electric pump for an air mattress.

The package includes, in addition to the mattress, a self-adhesive repair patch, a bag for storing products and transporting them, instructions and packaging.

The mattress is waterproof, able to withstand a maximum load of 273 kg.

The cover of the top part of the bestway air mattress resembles velor to the touch. Such roughness does not allow bed linen and bedspreads to slip off. Also, you don't have to use special means to clean the mattress from dirt.

What I liked:

• reliability. The product can withstand the weight of 2 people well;
• elasticity. It is provided thanks to strong partitions;
• the pump operates from the mains, so you can quickly inflate the mattress or deflate it;
• does not require complex care due to its flocked coating.

In the thickness of the product there is a built-in electric pump, thanks to which you can inflate or deflate it in a matter of minutes. You can also independently adjust its elasticity. The pump is connected to a conventional electrical outlet. If there is no access to the network, a simple mechanical pump can be used.

This inflatable sleep mattress has a pump average price 2100 rub.

Mattresses for sleep

Best Intex Comfort-Plush Inflatable Single Mattress with Pump

The single air mattress of this model combines comfort and advanced technologies. All around the perimeter equipped with inflatable sides for enhanced stability. The design provides for a special technology that involves the use of high-strength polyester fibers.

During my entire use of this mattress, I did not notice any signs of deformation on it. I also noted the tear resistance. This model does not require any protection and stands the test with dignity.

The novelty has the following advantages:

• maximum comfort during sleep and rest;
• constancy of the form of the structure as a whole.

I like that this the mattress has reliable pump , since you do not have to make special efforts to inflate or deflate the product. The model provides for the connection of manual and battery pumps, which is very valuable if it is not possible to connect the mattress to the mains.

When folded, the model occupies a minimum of space, and therefore is very convenient for transportation.

Mattress price - 3000 rubles.

Transformer Intex Pull-Out Sofa with air mattress pump

A product with versatility. It can be placed in an apartment or taken with you on a hike. This is a transformer model. It can be used as an inflatable sofa. In addition, if necessary, it is possible to turn it into comfortable bed- single and double.

Made from high strength material. The mattress is made of polyvinyl according to a special technology. The design contains two armrests with cup holders that are built into it. Despite the fact that the model is able to withstand an impressive weight, its dimensions are standard. They correspond to the size of a regular bed and are 71 * 193 * 231 cm.

Positive characteristics of the product:

• versatility of application. You can use this mattress as a sofa or make a bed out of it.
• It has two valves in its design. Accordingly, you can quickly blow off the product.
• the ability to withstand heavy weight - up to 200 kg!

The cost of the mattress is 4700 rubles.

Small air mattresses

Children's air mattress for sleeping Jilong Single (JL027233NPF) without pump

This is a comfortable and unpretentious children's air mattress for sleeping. The dimensions of the air mattress for sleeping are 157x66x23 cm. The description states that this product is intended for tourism.

Of the minuses I would like pay attention to the lack of a built-in pump. The product is affordable, and therefore you can close your eyes to this drawback. In addition, the package includes a bag for carrying the mattress. The weight of the structure as a whole is 1.8 kg.

The air mattress for the child has one compartment. The frame is cellular. A repair kit is supplied with the mattress. It may not be required.

Among the advantages I want to note:

• good level of rigidity;
• strength;
• ease of use.
• the surface is velor, pleasant to the touch;
• Mattress color grey.

The cost of the mattress is 2800 rubles.

Bestway Easy Inflate Flocked Air Bed (67223 BW)

The single air mattress is created on special technology. This model differs in the increased rigidity and endurance. In her there are reinforced partitions that provide similar characteristics.

Of the pluses, I want to answer the presence of a comfortable headrest, which can replace the pillow if necessary. The kit includes a self-adhesive patch in case the surface of the product gets damaged.

This is a cheap model with dimensions of 185x76x28 cm. A maximum mattress load of 130 kg is also acceptable. It is made from high quality vinyl. Designed for one bed. The weight of the structure is 2.5 kg.

Other features of the mattress:

• the presence of artificial suede on the surface. This material allows you to keep bed linen on the surface;
• ease of care. You do not have to use special means to remove contaminants;
• the presence of a built-in mechanical foot-type pump. Thanks to him, I manage to inflate or deflate the mattress in a few minutes.

The mattress costs 1000 rubles.

Double air mattresses

Mattress bed Intex Pillow Rest Classic Bed (66770)

Inflatable double bed with headrest. It is made in dark blue color and made of high quality modern materials.

The kit includes a bag for storage and carrying, as well as instructions in Russian. The pump for this product must be purchased separately. The upper part of the structure is made of polyvinyl chloride. The same can be said about the lower zone and side walls.

What I liked about this model:

• pleasant to the touch flocked coating;
• ease of care, the ability to clean any contaminants without the use of specialized products;
• not high price.

The air bed is designed for two sleeping places. The weight of the structure is 6 kg. Withstands loads up to 273 kg. This best option for those who are looking for a mattress with a pillow. In all other respects, the product meets Intex quality standards. To maintain its shape, the mattress has a wave-like surface. Some mattresses are equipped with an electric pump, others come with three-in-one valves.

The cost of the mattress is 3500 rubles.

Relax Flocked Air Bed Double

The air bed is designed for two beds and has a built-in electric pump. It is he who provides the opportunity for a full-fledged comfortable rest. Upper part is waterproof and covered with protective material. It is called flock. Its velvety structure prevents the sheet from slipping off and increases the degree of comfort.

The package also includes a carry bag for easy storage. The built-in pump, powered by 220 V, allows you to pump up the bed in 2 minutes.

The main features of this model are as follows:

• comfortable design, equipped with a built-in cushion and annular bulkheads;
• anti-slip coating that is easy to clean.

On the other hand, this product does not retain its shape as well as we would like. With prolonged use, the mattress may bleed air.

The cost of the mattress is 3000 rubles.

The results of practical testing of air mattresses in the video will help you make the right choice:

An air mattress is a universal product - you can take it with you on a hike, place it in a tent, you can swim on it. In addition, this product can be used at home as a permanent bed or a bed for guests. In order for this product to serve as long as possible, you should correctly approach its choice. Therefore, before moving on to a direct review of the models, we decided to give the main parameters that you should pay attention to when buying a mattress.

The main characteristics of air mattresses

Today in sports and tourist goods stores is presented wide range of air mattresses, so it is very easy to get confused in their diversity. The standard thickness of the mattress is in the range from 13 to 25 cm, however, there are models with a thickness of up to 46 cm. This parameter has direct influence on the dimensions of the structure and its weight, including when folded. Therefore, at this point you need to pay attention, especially if you plan to take the mattress with you on hikes or trips.

The highest quality products are made from high quality PVC. Their surface can be smooth (such models are ideal for swimming) or with a velvety finish. You can find products made from other materials. If the surface resembles a film, then such a mattress should not be purchased, since it is not very safe during sleep and does not behave very well on water - the surface becomes slippery when wet.

The number of sections affects the duration of operation and safety. The more sections, the higher the price, however, the reliability will also be higher. Color does not affect the performance of the product too much. The main recommendation in this regard is that you should not purchase a black mattress if you plan to use it on the beach, as it will get quite hot.

It is desirable that a bag for storage and transportation be included with the mattress. It will be very convenient when traveling. Also pay attention to the pump - it can be manual or electric. For hiking trips, a model with manual inflation or with the ability to connect to a car battery is selected.

When compiling our rating, we relied on user reviews, and also considered the ratio of price and quality of models. Therefore, the review included mattresses that are quite affordable in terms of price, which will be affordable for most users. Now is the time to move on to the very review of the best air beds of 2018.

Top 10 best models of air mattresses

10. Bestway Aslepa Air Bed

This is a single-seat model designed for a person weighing up to 120 kg. It is made of PVC flocked materials and comes with a sleeping bag. The velvety surface allows the sheets or the person himself not to slip off during sleep. Inside there are several reinforcing partitions made in the form of glasses. Thanks to them, the structure acquires additional strength and rigidity. The mattress can be used without a pillow - the design provides a very comfortable headrest.

The kit comes with a foot pump, which is quite reliable and allows you to inflate the mattress in just a few minutes. The sleeping bag that comes with the kit is made of polyester and is fastened to the mattress itself. The model is perfect for both home use and for hiking. When folded, the weight of the product is almost 3.5 kg, the product does not need in large numbers free space, easily fit in a small travel bag.

Advantages:

• Reinforcing elements allow you to withstand significant loads;
• The model has a velvety coating that does not allow slipping;
• Universal valve.

Disadvantages:

• Pretty expensive.

9. Bestway Flocked Air Bed

This model is characterized by increased strength indicators. It can comfortably accommodate two people, in addition, the mattress is able to withstand decent loads - up to 237 kg. The partitions here are tubular, their presence does not affect the comfort of operation, in particular, sleep. When deflated and folded, the model weighs about 3.5 kg. Included with the design is a patch that allows, if necessary, to repair the damaged area.

The front surface has a flock coating that does not need to be extra care, it does not leave dirt, dust or sand. It dries quickly enough and does not wear out during operation. Unfortunately, there is no pump in the kit, but the shape of the hole is universal, so you can use absolutely anyone, including a car pump.

Advantages:

• Ideal option for a double tent;
• There is a repair kit;
• Partitions have a reinforced structure;
• Universal - can be inflated with any pump.

Disadvantages:

• The pump is not included in the kit.

8. Outwell Flock Classic Double

This is a double and not too expensive model, which is designed for two people at once. The mattress is made of polyvinyl chloride materials, upper layer velor, absolutely not slippery. The design has a double recessed valve, thanks to which you can quickly pump it up. When deflated, this design occupies a minimum of free space - 30x29x11 cm. The kit also comes with a bag for storing and transporting the product. The only limitation in terms of the use of this mattress is that it should not be laid out in the sun, as its black color will contribute to too rapid heating. The surface will begin to heat up, which is why it will not be very comfortable to use the model.

The headboard is slightly raised, due to which this mattress can be used without a pillow. When deflated, the product weighs only 2 kg, the material from which it is made does not require special care. If you use it carefully, then this mattress will last for quite a long time.

Advantages:

• Long period of operation;
• Spacious, designed for two people;
• It is made from durable materials capable of retaining its original appearance during its service life.

Disadvantages:

• Quite an expensive model.

7. Bestway 67004 Flocked Air Bed King

This double model is produced using the latest Coil Beam Construction technology. Inside it has a whole system of reinforced tubular-type partitions, thanks to which the mattress acquires additional rigidity. The product will not be deformed even if several people lie on it at once. The flock coating, which is available on the front side of the product, looks like velor. It cleans up easily, no need to resort to additional tools.

The valve used for inflation and deflation is universal, so you can use any pump, regardless of the type of its operation - foot, manual, electric. It is not included in the kit, you will have to purchase it separately, but there is a fairly large patch with which you can seal the damaged area. About Us reverse side It has a self-adhesive surface, so you do not have to buy additional special glue. The mattress is able to withstand weight up to 300 kg, dimensions- 203x183x22 cm, inflates within 4-5 minutes, weighs about 5 kg when folded.

Advantages:

• Very comfortable model;
• Has an orthopedic base;
• Comfortable headboard, can be used without a pillow;
• Durable mattress;
• Repair kit provided.

Disadvantages:

• The pump is missing.

6. Intex Classic Downy Bed 68765

This model is designed for use both at home and outdoors. The flocked layer is quite dense, due to which it is very comfortable to sleep on such a mattress, it is almost impossible to slip off it, moreover, the plush surface easily holds bed linen in one position. The flocked layer is 0.52mm thick and is completely waterproof, so you can swim on it. Dirt on the surface also does not hold, it can be quickly cleaned off a small amount water and a soft cloth - this is very convenient during a hiking trip.

The mattress is produced using beam technology, so that it will retain its original shape throughout the entire service life. This parameter is also affected by a fairly dense vinyl canvas, from which the main elements are made. The design is designed for two people, able to withstand about 290-300 kg. The mattress comes with two orthopedic air pillows, as well as hand pump. The thickness of the product is 22 cm - no bumps and other surface irregularities will be felt during sleep. When folded, it occupies a minimum of free space, so it is convenient to take it with you on a hike.

Advantages:

• Made from high quality and durable materials;
• Acceptable cost;
• When folded, it is quite compact;
• Thick mattress making it very comfortable.

Disadvantages:

• It is not recommended to store in the cold - the valve begins to gradually release air.

5.Intex Super Tough Airbed

This is one of the most comfortable models included in our ranking of the best air mattresses of 2018. The originality of this product lies in the presence of a built-in electric pump that runs on simple batteries. To increase the strength and elasticity of the model during its production, different kind longitudinal partitions. The mattress is universal - it can be used both outdoors and at home. It is made from high quality polyurethane foam with excellent thermoplastic characteristics.

The model is single, capable of withstanding about 136 kg. Linen does not slip off its surface; when deflated, the weight of the mattress is 4.2 kg. The product comes with a handy bag.

Advantages:

• Withstands a significant mass;
• The built-in electric pump is provided;
• Universal product.

Disadvantages:

• Significantly heavier than other models;
• Expensive.

4. Relax Flocked Air Bed Double

This is not just an air mattress, but a real full-fledged double bed, which is equipped with an orthopedic base. In addition, it has a low cost. The model, like the previous one, is equipped with a built-in electric pump that runs on mains, so the product cannot be taken to nature. The surface has an anti-slip coating, but it quickly becomes electrified, which will cause crumbs to stick to it, dust and hair will be attracted to it. You will have to periodically clean it of dirt with the help of the most ordinary vacuum cleaner.

It is worth noting that the manufacturer does not recommend the use of various kinds of chemicals for cleaning. Sleeping on this bed is quite comfortable, but it should not be pumped with air - this will greatly reduce its service life, and it will also spring too much. It is made from high quality PVC materials, the model is able to withstand loads up to 227 kg. In terms of overall dimensions, the bed is no different from the standard one - 196x136x22 cm. The deflated weight is 4.2 kg, the design is reinforced with ring-shaped bulkheads, thanks to which it will not sag under load. In addition, the kit comes with a very comfortable inflatable pillow.

Advantages:

• There is a built-in electric pump;
• Inflates and deflates in just a few minutes;
• Produced using the latest technology.

Disadvantages:

• The pump works exclusively from the mains, so you won’t be able to take such a mattress into nature.

3. Campingaz Smart Quickbed Single

This mattress is one of the most suitable for outdoor recreation, but it can also be used at home. Comes with a convenient orthopedic pillow. The mattress is designed for one person, but it is able to withstand a significant load - up to 200 kg. The product is made of polyvinyl chloride materials, when folded it takes up a minimum of free space and weighs only 2 kg, which makes it easy to take the mattress with you even on hiking trips. As with other models, the front surface is flocked. The valve for pumping air is quite reliable, so if you wish, you can swim on such a mattress. Its overall dimensions are 1880x740x190 mm. The kit also comes with a small patch with a self-adhesive backing in case the mattress gets punctured.

Inside there are several autonomous sections that create additional comfort and ensure absolute safety on the water. If one of them deflates or pierces, the rest will keep the mattress afloat. The mattress can easily fit in an ordinary tent, it is quite high in order to prevent cold from the ground, it protects well from bumps and uneven ground, providing a long and full sleep.

Advantages:

• Pleasant to the touch;
• Comes with a pillow;
• Very comfortable for hiking
• Doesn't deflate overnight
• During the entire service life, it retains its original shape.

Disadvantages:

• Not too convenient location of the valve;
• Not suitable for tall people.

2. Intex 58830 raft

This air mattress has a rather original appearance - no other model included in our review of the best air mattresses of 2018 had such a design solution. It is made from fairly durable vinyl materials with reinforcement and a thickness of 0.3 mm. The shape is stable, unbending, and remains in its original form for a long time. The mattress includes two autonomous air chambers, equipped with a cable around the perimeter. It is quite convenient to swim on it, to moor too, just thanks to the cable. Overall dimensions - 171x140 cm, when deflated, it weighs 2.8 kg. The kit also comes with a self-adhesive patch.

Even a child can use such a mattress, and parents can be absolutely calm and not be afraid that the baby will fall into the water. The coating is anti-slip, decorated like real logs tied with a rope. Even if water gets on the mattress, it does not start to slip. The kit comes with a mechanical pump - the mattress can be inflated right on the shore of the reservoir.

Advantages:

• There is a repair kit and a pump;
• Very original appearance;
• Pumps up fairly quickly;
• The reliable valve does not pass air.

Disadvantages:

• At first it has a strange smell, but it quickly disappears.

1. Bestway Comfort Green Double 67380

It’s not for nothing that this model took first place in our ranking of the best air mattresses of 2018. It has an excellent value for money, in addition, all users respond positively about this product. This mattress is ideal option for outdoor recreation. It is produced using the latest Coil Beam Construction technology. Inside, it has several reinforcing partitions that allow it to withstand decent physical exertion. They also give the mattress extra rigidity and endurance. The upper part has a flocked coating, it is similar to velor to the touch, it is very easy to clean without the involvement of various kinds of products.

The design also has a universal valve that is suitable for any pumps, however, the pump itself is not included in the kit - it will need to be purchased separately. The mattress is made exclusively from environmentally friendly clean materials. The model is able to withstand loads up to 160 kg, inflates in 2.5-3 minutes. Its overall dimensions are 191x137x22 cm - these parameters allow two people to sit on it at once.

An air mattress is usually associated with tourism, hiking, the sea. In recent years, these products are increasingly used as beds. In conditions of small-sized housing, this is often a way out. An air bed can accommodate guests or relatives who have come to stay, and then deflate, fold and hide again. The quality and technology of manufacturing mattresses are constantly being improved. Many prefer airy furniture as an alternative to oversized beds in a country house.

An air mattress is a great way out when you are waiting for guests.

Inflatable mattress of which company to choose

The choice of companies producing the best air mattresses is relatively small. The trusted brands below offer a wide range of models with the characteristics required by the user. Among the well-proven ones are:

• outwell. The brand is from Denmark. Specializes in the production of goods for family recreation and camping. The price range of the commodity producer is high, but it is fully justified by the quality and reliability of the products.

An interesting mattress from Outwell.

• bestway. A brand with a young history. Affordable prices with decent performance. Models of air mattresses differ in bright design.

Unusual design of a mattress-bed from Bestway is presented.

• intex. Honored leader in the market of manufacturers of inflatable furniture. Manufacturer's models cover all price categories.

Similar to the previous option, the mattress is a bed from Intex.

• Relax. Manufacturer of PVC products from the "Celestial Empire" - this is how the inhabitants of China call their country. Brand products belong to the middle price category. In spite of Chinese origin, differ in high quality and non-standard appearance.

As always, non-standard ideas are presented to us by the Chinese manufacturer "Relax".

• Campingaz. French brand with nearly 70 years of history. Specializes in the production of goods for outdoor activities. Familiar to buyers in 110 countries. It has proven itself in terms of manufacturability, quality and practicality.

One of the options for inflatable products from Campingaz.

The general features of the models of the presented brands are similar. If the mattress you like from one brand is not affordable, you can pay attention to the analogue of another company. In addition to mattresses, the product line of manufacturers includes beds, sofas and armchairs. If China (or another Asian country), this is not a reason to be upset. High level quality checks, availability of certificates and competitive price are the priorities of the manufacturer.

Types of air mattresses

Air mattresses are divided into 3 categories: for sleeping, swimming and outdoor use (tourism, beach holidays, camping, picnics). This is not a conditional division. Functional characteristics each group is fundamentally different and optimally adapted for a particular purpose.

Double air bed, not a bad replacement for bulky furniture.
An interesting option for a swimming mattress.
Even away from the city, you can feel at home.

The most solid designs are mattress beds, sofas, orthopedic options and models for baby sleep. Beach mattresses and sofa-hammock models are lightweight and durable, but they will not provide a good night's rest. The principle of the construction of swimming mattresses is similar to the structure of a submarine: several autonomous sections with separate valves for inflation. Lightweight and at the same time resistant, they are made of quick-drying materials, often with fluorescent properties.

Inflatable beds

Modern models are equipped with many separate chambers with partitions made of PE fibers, which contributes to an even distribution of the load on the surface and prevents the edges of the mattress from “folding” (it will not work). There are options for mattresses with raised sides. The height of many options is the same as for full beds. The materials used in the creation of products provide increased elasticity, wear resistance, thermal insulation. Additional stiffening ribs add stability design. The frames of many models consist of 2 halves (according to the “sandwich” principle), which makes it possible to fill a sheet between them. The velvety surface is pleasant to the touch and prevents slipping. Of the minuses: the need to periodically pump up the product.

The convenience and practicality of inflatable products is in no way inferior to our usual furniture.

Inflatable sofa mattress

An amazing invention of our time. A presentable appearance in tandem with double functionality and a pleasant price, like for a transforming sofa. On the subject of "airy" furniture, you can sit three together, or sleep together. The backrest with armrests provide comfortable support for the body and arms while sitting. When folded, it takes up little space. The rest of the features are just as great as the air beds.

Comfortable and beautiful inflatable sofa will fit perfectly into any environment.

Models are designed for children aged 3 to 8 years. A safe design (of the "arena" type) consists of an inflatable frame with sides and an air mattress inserted inside. Easy to clean, non-slip. Convenient option sleeping place at a party, at the cottage and rest. For older children, you can choose a model without sides, but with a sleeping bag that is put on.

Children's option air mattress, for smaller kids.

interesting, original, modern model for outdoor recreation and picnic. Of all the inflatable options, the most durable and compact. Sofa-hammock is an inflated pipe folded in half. The material of the outer coating - dense, durable canvas - reliably protects the surface from damage. Withstanding a load of up to 200 kg, the product itself weighs only 1.1 kg. To prevent the sofa from being blown away by the wind, the kit includes a peg and a fixing loop. Can be attached to a beach umbrella. The design allows inflation without a pump. The principle of inflation is different from the tourist version and requires some skill. The comfortable shape of the sofa allows you to relax and take a nap under the bird trills.

The model is perfect for those who want to relax.

More commonly referred to as an inflatable mat. No pump is needed for inflation, it is automatic. This is a very handy feature for backpackers who may feel tired at the end of the day associated with an active day's activities. The increased strength and elasticity of PVC materials is designed to accommodate the product in adverse conditions of pits and bumps. Special attention is paid to thermal insulation properties, which is important when placed on bare ground. The mat can be easily rolled up, tightened with straps, folded into a cover and fastened to a backpack. There are buttons for stitching several rugs into one design.

A tourist air mattress is a faithful companion of any traveler.

Beach air mattress

Universal model two in one: a swimming mattress and a chaise longue. Of the additional amenities: the presence of a "cup holder". The contour support system provides the body with complete relaxation. There are models with a “reclining” position. The thickened layer of the coating provides maximum protection against punctures with not too sharp objects. The design of autonomous chambers will not allow the product to be blown away when one of them is punctured.

Beach air mattress is perfect for those who like to spend time near the water.

The presence of a pump - external or built-in - is a prerequisite for such a voluminous product.

• Models inflated mechanically - with an external pump. Advantage: budget price, the device does not depend on electricity. Disadvantages: the need to make physical efforts (working with arms and legs) to achieve a result. When purchasing a pump from another manufacturer, it is important to ensure that it matches the size of the product in terms of power.

Gathered on a hike, there is no electricity at hand - an air mattress with a mechanical pump is an excellent solution to this problem.

• With built-in electric pump. The best choice for a "bed" for home use. Advantages: ease of operation, no need to expend energy - the device performs the work of inflating and deflating on its own, it is possible to replace it with a mechanical pump. Disadvantages: higher price, requires a source of electricity.

Why waste time and energy when you can just press a button.

• Electric pump with built-in battery. An alternative to an electric pump from a 220V network. There are two options for recharging the battery: from the network, or from the cigarette lighter in the car.

Another great alternative that will help you get rid of the unnecessary problems of outdoor recreation.

This type of mattress must be light, but sufficiently stable. Stability takes on a special meaning in windy conditions and minimizes the risk of rolling over in the water. It is better if the model is bright, made of vinyl with fluorescent properties and equipped with handles that allow you to climb onto the mattress and hold on to it while swimming. High-quality products are equipped with a valve that excludes the possibility of air escaping through the inflation hole. Many people like pillow options.

A good idea for a mattress, especially when not only you have such a mattress.

Inflatable mattresses for camping

Not as solid as an air bed, but quite comfortable, durable and practical mattress. Models are equipped with a foot pump with the ability to connect other devices. It is compact when folded, which is important when you need to put a lot of things in the trunk. The wave-shaped design, combined with high-strength PVC material, evenly distributes body weight. The flock coating prevents slipping and is easy to clean from dirt. The category of camping mattresses includes models adapted for placement in the back seats of cars and SUVs.

You are presented with a variant of an air mattress in a car.

Air mattresses for sleeping

If we talk about mattresses for a good sleep, then you should stop at the so-called air beds and sofas, as well as orthopedic options - high products of increased strength, with a reinforced frame, non-slip coating and high sides - for children. When choosing an inflatable product for recreation, you should consider the dimensions: width, length and height (thickness) of the product. Mattresses are divided into 3 categories.

• Single - with a width of 76 to 99cm, a length of 191cm and a height of 22-33cm.
• One and a half - with a width of 100-137cm, a length of 191-203cm and a height of 22-48cm.
• Double - with a width of 152-183 cm, a length of 200 cm and a height, like a one and a half.

Sizes of products from different manufacturers may vary. High mattresses with a height (thickness) of about 50 cm can be distinguished into a separate category. The purpose of the thickness is to imitate the height of an ordinary bed. Some models of transformers on special fasteners can be transformed from a high bed into two berths of a lower height.

Mattress-transformer, if you want to lie down comfortably - this is not a problem.

Types of air mattresses for sleeping

Depending on the purpose and frequency of use of the product, the choice of a specific model will depend.

• For daily use. If it is not yet possible to purchase a full bed with orthopedic mattress, it makes sense to buy a product from the section "Inflatable bed". This line is made of highly durable materials, providing additional rigidity and a "correct" coating. The chambers of some models are covered with latex or polyurethane foam which greatly extends the life of the product.
• Orthopedic. Modern technology has made it possible to do the impossible - an air mattress that relieves back pain. The level of rigidity is regulated by a special button, it is possible to choose the best option for yourself.
• Children's. There are models with designs adapted for children over the age of 3 years.
• Tourist. For a night's sleep on a camping trip, a compact inflatable mat is ideal. The product, which has a small weight, is attached to a backpack and is easily placed in a tent.
• Sofa mattress. Universal design with original appearance. During the day and in the evening, the assembled, compact sofa is a great option for reading and gatherings. In the evening, in a few movements, it transforms into a comfortable sleeping place.

How to fix an air mattress for sleeping

Even branded products are not immune from damage. Usually, a set of patches and glue comes with a branded product. Step-by-step instructions: how to seal a mattress.

Find damage. The easiest way to do this is if there is a body of water nearby. Immerse the product in water and inspect. Air bubbles will form at the site of injury. At home, you will have to coat the product soapy water, site by site, press, and monitor the process of bubbles.

We need to find a hole from which air comes out.

Degrease the surface with alcohol, allow to dry.

Before degreasing, you need to clean the surface of excess debris.

Attach a patch.

It remains only to glue the patch on a pre-prepared surface.

Features of air mattresses for sleeping

An air mattress for sleeping is a more solid and serious thing, which differs in a number of characteristics from simplified models designed for swimming, relaxing on the beach and camping.

• Design. Modern designs of air mattresses provide for the presence of separate chambers. This characteristic provides good body support during sleep, even distribution of the load and stability of the edges of the product.
• Height. The increased height parameter gives a feeling of relaxation - as in full bed. In addition, it is more convenient to get up from a high mattress, which is important for people of advanced age, or with a lot of weight.
• Materials. Innovative technologies make it possible to create materials so dense (PVC, vulcanized rubber, etc.) that you can easily forget that you are sleeping on “airy” furniture. The base material is PVC. Mattresses for home use are covered with pleasant to the touch viscose or velor. More expensive options - jacquard. All types of coatings are perfectly cleaned and prevent sheets from slipping off.
• Dimensions. There are single, one-and-a-half and two-sleeping options, with dimensions that allow you to freely fit on the surface.
• Rigidity. Professional Models famous brands provide additional reinforcement to give the structure greater rigidity.
• Coating material. The flock top and bottom ensure that the sheet adheres to the mattress and prevents the underside from sliding on the floor.

Comfortable sleep is the key to the well-being of you and your loved ones.

Which air mattress to buy

The choice depends on several factors. Purpose - swimming, hiking, picnics, gatherings with friends, a good night's sleep - determines the choice of model. For occasional use, you can buy a simpler option. If the mattress is to take on the load of a full-fledged sleeping bed before buying a bed, it is better to opt for a more solid, orthopedic product. The size of the chosen product and its height will depend on the question of how many people will sleep on the mattress and what is their weight. Not the last role is played by the issue of the brand. People sometimes say, "We're not rich enough to buy cheap things." Savings in the purchase of an inflatable product can lead to the purchase of a low-quality item that will cause serious discomfort in use and will quickly fail. You will have to buy a new, now already high-quality thing. Write off the first purchase as a loss, and the money spent on it as a payment for a bitter experience.

Choose carefully, everything is in your hands.

Video: Different types of air mattresses and beds.

4

An air mattress is an ideal assistant in organizing a comfortable place to relax and sleep. In 2-3 minutes, a compact product turns into a comfortable bed, sofa or hammock, which can be used not only at home, but also outdoors. We have prepared for you a selection of the best air mattresses that meet the requirements of quality, reliability and durability.

The best air mattresses

All air mattresses are divided among themselves into two large categories: the first are designed for swimming on water, and the second - for use at home and in nature (camping sites, beaches). This division is not at all arbitrary: mattresses differ from each other in structure. So, the best swimming mattresses consist of several independent sections with separate valves for inflating. The principle is approximately the same as that used in the construction of submarines: if one section is damaged, the rest will be unharmed. In addition, swimming mattresses are made of quick-drying materials that are resistant to moisture, but they are devoid of any orthopedic qualities. With mattresses designed for sleeping, the situation is reversed.

4 Deluxe Single High

The most stable, easy care and inflation
Country: USA
Average price: 1,454 rubles.
Rating (2019): 4.7

If your budget is limited, then the best choice will be the Deluxe Single-High air mattress from Intex, which can comfortably accommodate 2 people. This is the cheapest model in the segment, since it has a relatively small size and lacks a headrest. The main advantage of the product is a longitudinal frame equipped with stiffeners. They provide maximum stability while relaxing.

The length of the Deluxe Single-High air mattress is 191 cm, the width is 137 cm. An excellent choice for those who want to buy a quality product for summer cottages or hiking at an affordable price. The practical flocked coating prevents the bed linen from slipping off and makes the mattress easy to care for. Pros: stable and stable construction, load capacity up to 273 kg, low price. Judging by the reviews, the lack of a headrest is the most significant disadvantage this air mattress.

3 Outwell Flock Classic Double

Most durable
Country: Denmark
Average price: 2400 rubles.
Rating (2019): 4.6

Outwell is a Danish family camping brand. In the production of mattresses, the company pays great attention to their quality: according to statistics, Outwell mattresses are the most reliable of all presented in this price category. The weight of this mattress is the smallest in the ranking (the mattress weighs only 3.28 kg) with standard dimensions(190x135x20 cm). Given the recommended operating environment, this size of the mattress is justified, as the mattress fits well in a two-person tent. As for the cost, it is the highest in the ranking.

Advantages:

• long service life.

Disadvantages:

• high price.

2 Bestway 67004 Flocked Air Bed King

Great affordable sleeping mattress
Country: China
Average price: 1590 rubles.
Rating (2019): 4.7

Bestway is no less famous, but younger than Intex, manufacturer of inflatable PVC products. Bestway products are characterized by low cost, good performance and striking design of their products. Flocked Air Bed King is a huge 4.85 kg double mattress with a flocked cover and a reinforced structure that prevents deformation under maximum loads (maximum load 295 kg). Recommended places for operation - home, camping.

Advantages:

• little weight;
• reinforced construction;
• low cost.

Disadvantages:

• have to pump often;
• has a persistent smell of rubber;
• creaks on slippery surfaces.

The first thing you need to pay attention to when choosing an air mattress for relaxation is the material from which it is made. The better and more reliable it is, the more comfortable and durable the product. So that you make the right choice, we have prepared a comparison of the main materials used in the manufacture of air mattresses:

Material
	High strength and tensile strength, Ease of care and easy removal of contaminants	High-quality nylon is expensive, so air mattresses made from it cannot be cheap.
PVC	Practicality and high reliability, Durability and resistance to deformation, Lots of style solutions: shapes, colors	not found
Thickened vinyl	100% environmental safety, Minimum deformation in use	Difficult care: special detergents must be used to remove dirt
Polyolefin	Possibility of use at any high and low temperatures, Long service life	Relatively low resistance to punctures, scratches and tearing

1 Intex Classic Downy Bed 68765

The best air mattress
The country: USA (Made in China)
Average price: 2000 rubles.
Rating (2019): 4.8

Classic Downy Bed 68765 is a double mattress from the global manufacturer of inflatable PVC products - Intex. Intex is the oldest manufacturer in its category: it has been known to customers since 1964. Intex mattresses differ from their competitors in a solid base, which allows them to be used not only at home, but also in nature. This also applies to the Classic Downy Bed 68765 mattress. distinguishing feature– very small weight (only 5.3 kg). The mattress is quite firm, and therefore ideal for a night's sleep. The top layer is soft to the touch, perfectly cleaned and does not allow bed linen to stray. This mattress does have some drawbacks. According to buyers, it is not suitable for sleeping on open ground during the cool season due to the lack of additional thermal insulation.

Advantages:

• comfortable for night sleep;
• durable;
• has a very strong bottom.

Disadvantages:

• there is no pump included;
• no thermal insulation.

The best air beds

Air mattresses have long ceased to be just a floating craft. Made from quality materials, they are increasingly called furniture and are used in city apartments along with their stationary counterparts. It is convenient to transport an air bed, because when folded it is compact, and with a pump built into it, it easily turns into a full-fledged sleeping place in just a few minutes. Meanwhile, the inflatable bed has a significant drawback: its service life, as a rule, does not exceed 3-6 years. Structurally, such beds differ little from air mattresses (except for the presence of a back). In addition, some air beds are equipped with a special bedding frame that provides orthopedic comfort. Checking the presence of such a frame is very simple - just feel the corner of the mattress with your fingers: if the frame is present, the top layer of the product is denser and tougher. Air chambers in such products are wrapped in foam rubber for greater rigidity, and the most expensive models are even covered with a layer of foam (latex or polyurethane). However, these advantages are accompanied by an astronomical cost, often exceeding the price of ordinary beds.

4 Campingaz Smart Quickbed Single

The ideal choice for hiking, the most reliable valve
Country: France
Average price: 2,130 rubles.
Rating (2019): 4.7

The best Campingaz Smart Quickbed Single is the perfect choice for relaxing at home or outdoors. Its main advantage is a large orthopedic pillow that comes with the kit and provides an even more comfortable sleep. The model is designed for 1 person, the maximum load is 200 kg. It differs from other air beds in its compactness. When deflated, the product practically does not take up space and weighs only 2 kg. Thanks to this, you can take it with you on any trip.

The front surface of the Campingaz Smart Quickbed Single air bed is covered with a flocked layer (velor), so it is pleasant to the touch. The reviews note that the model is equipped with a very reliable valve for pumping air, so if you wish, you can even swim on such a bed. If you accidentally pierce the product, you can repair it yourself using a self-adhesive patch (included in the kit). Pros: does not deflate at night, has a concise design. However, the length of the bed is only 188 cm, so it is not suitable for people whose height is higher than this indicator.

3 Relax Flocked Air Bed Double with integrated electric pump

The most comfortable air bed
Country: China
Average price: 3400 rubles.
Rating (2019): 4.5

Relax is a brand of the Chinese company Shanghai Jilong Plastic Products Co. Ltd engaged in the production inflatable pvc products. Relax products belong to the mid-price category, they are distinguished by high quality and atypical design of their products. Bed Flocked Air Bed Double – standard size(191x136x22 cm) and weight (4.1 kg) with a maximum load of 227 kg. It has a reinforced structure with bulkheads in the form of rings, the top of the bed is flocked. Equipped with a pillow and built-in electric pump.

Advantages:

• equipped with an electric pump.

Disadvantages:

• high price.

2 Intex Pillow Rest Reised Bed 66720

The best air bed
The country: USA (Made in China)
Average price: 3400 rubles.
Rating (2019): 4.5

The two-level bed from Intex is supplied with vertical partitions for giving to a design of additional rigidity. Standard characteristics of the model: size - 152x203x42 cm, permissible load- 273 kg, weight - 7.5 kg. It has a headrest, a flocked cover, and a bag for easy transportation.

Advantages:

• high;
• the headrest replaces the pillow.

Disadvantages:

• not detected.

1 Bestway Comfort Green Double 67380

Best value inflatable bed for sleeping
Country: China
Average price: 1600 rubles.
Rating (2019): 4.7

A distinctive feature of this model from all the others in the rating is its environmental friendliness: the bed is made of materials obtained as a result of the recycling of polymers. Otherwise, it is a model of 190x137x22 cm, standard in size and performance, with a maximum load of 200 kg. Ideal as a temporary bed.

Advantages:

• low cost.

Disadvantages:

The best inflatable sofas

An inflatable sofa is a great solution for a comfortable stay. big company both at home and outdoors. Depending on the design, such a sofa can be monolithic or folding. A folding sofa (or sofa-transformer) can be expanded, getting a large and comfortable bed. The monolithic sofa is inflated as a whole, and its back and seat are non-separable. Depending on the model, these sofas can be equipped with cup holders in the armrests, headrests and inflatable cushions that provide more comfort for users. The covering in these products, as well as in ordinary air beds, is flocked, very easy to clean and comfortable to use.

4 Multi Max II Air Couch

Spacious and comfortable sofa, flocked surface
Country: China
Average price: 5 535 rubles.
Rating (2019): 4.7

The inflatable sofa Multi Max II Air Couch from the Bestway brand with an orthopedic base is unique combination practicality, convenience and style. The model is made of high-quality polyurethane foam, so it does not deform even under heavy loads. The sofa is equipped with a comfortable backrest, armrests and pillows designed for comfortable rest and sleep. The spacious bed has a length of 200 cm and a width of 160 cm, so it can comfortably accommodate 2 people.

The flocked surface of the inflatable sofa Multi Max II Air Couch does not absorb moisture and reliably protects the product from contamination. The cellular framework of model provides uniform distribution of loading to 295 kg. Pros: high elasticity, the presence of parallel stiffeners, a full-fledged place to relax. Of the minuses, many users note a lot of weight in the reviews, but this does not make the sofa bulky. Please note that the pump is not included, so you have to buy it separately.

3 Bestway 67356

best sofa design
Country: China
Average price: 3200 rubles.
Rating (2019): 4.5

Transforming sofa Bestway 67356 is a bright and functional sofa, bed and deck chair. Available in three color solutions: blue, light green and orange. The surface of the model has a soft flock coating, on the sides of the seat there are backs in the form of cylindrical pillows. The sofa comes with an electric pump, as well as a bag for easy transportation.

Advantages:

• bright design;
• low price.

Disadvantages:

• very noisy pump;
• designed for two people only;
• defects are visible on a light surface.

2 5-in-1 Sofa Bed with pump

The most functional design
Country: China
Average price: 4000 rubles.
Rating (2019): 4.4

This model is unique, as it is simultaneously a sofa (designed for two people), an armchair, an adult bed (single-level or two-level, with or without a headboard), a children's bed and a chaise longue. The sofa comes with a universal electric pump. This model also has disadvantages: many users do not like that this sofa is only available in black.

Advantages:

• functional;
• big.

Disadvantages:

• no flocked cover.

1 INTEX 68566

The best inflatable sofa
The country: USA (Made in China)
Average price: 4700 rubles.
Rating (2019): 4.9

According to statistics, the Intex 68566 model is the most popular among inflatable sofas. This sofa is folding, designed for three people in a sitting position and two - lying down. Consists of several independent chambers. According to reviews, this sofa is very stable even when fully loaded. The model is made of high-quality polyvinyl, the thickness of which on the back and sides is half a millimeter, and on the bottom - 0.38 mm.

Advantages:

• stable;
• inexpensive;
• compact when folded.

Disadvantages:

• not detected.

best air mattress hammock

An inflatable hammock is an unusual, but very comfortable chair-mattress for a beach holiday. It takes up minimal space when folded, suitable for relaxing in the water and on land. The obvious advantage of such sunbeds is the cost and mobility that are incomparable with the usual plastic or wooden hammocks. Hammocks are available in the form of inflatable chairs, poufs and mattresses. In our rating, there is only one hammock for a beach holiday, however, it really is the best.

3 Air sofas

Ultra-durable hammock, high resistance to moisture and scratches
Country: Belarus
Average price: 2,100 rubles.
Rating (2019): 4.8

The Air Sofa Air Sofa by Banana is your best companion for outdoor activities. It is made of ultra-durable RipStop nylon, so it is resistant to punctures, scratches and moisture. You don't need a pump to inflate your hammock. When deflated, it fits into a special bag, so it can be easily transported.

Hammock Air Sofa is able to withstand loads up to 250 kg. By appearance the product resembles huge pillow consisting of 2 inflatable parts. In the space between them, 3 people can comfortably accommodate. The process of installing a hammock takes from 15 to 30 seconds, even children can easily cope with this task. Pros: ease durable material and ease of use. The only negative is the gradual deflation.

2 Bevan 2.0

The most compact and lightest, many stylish colors
Country Russia
Average price: 2,691 rubles.
Rating (2019): 4.9

The inflatable hammock sofa "Bevan 2.0" is made of a special fabric impregnated with a water-repellent compound. Its main advantage is the ability to withstand a load of up to 300 kg, so 3 people can easily accommodate on it. You can prepare a place to relax in just 15 seconds, because this hammock mattress does not even need a pump to inflate! Models are equipped with special devices designed to fix the backlight and pegs.

Please note that sleeping on the Bevan 2.0 sofa is not very comfortable, as this product is too soft. It is more suitable for relaxing, playing or sitting. Inflatable hammocks are presented in various colors, so you can easily choose a model for the interior of your home, cottage or tent design. Keep in mind that light products are very easily soiled. Another advantage of this hammock is its compactness. It does not take up much space and weighs only 1.5 kg. Pros: The hammock is machine washable and comes with a handy carrying bag. Cons: the first 2-3 times it is difficult to inflate the product, you need to adapt.

1 Lamzac hangout

The best inflatable hammock
Country: Netherlands
Average price: 1150 rubles.
Rating (2019): 5.0

Lamzac hangout is a stylish, expressive and very compact (almost pocket-sized) hammock lounge mattress. It is sewn from durable nylon, automatically filled with air, can withstand up to 200 kilograms, has a pocket for a book, does not let water through, has a loop for attaching to a beach umbrella, easily tolerates washing in an automatic machine.

Advantages:

• very compact;
• attracts attention;
• does not need a pump.

Disadvantages:

• expensive.