How to make a coffee table from chipboard. A simple way to make a table from chipboard with your own hands, which is convenient to use and pleasant to show to guests

Furniture making with my own hands- not only a way to save money, but also a fun activity. You can bring your wildest ideas to life, for example, creating a coffee table. After all, this is not only stylish accent in the interior, but also a functional element of the room.

The procedure for making a table at home is as follows:

• We take a beam with a cross-section of 5x10 cm, cut it into three parts, several pieces each. For example: the length of the first part is 130 cm, it is necessary to cut 9 pieces of beams with this length. The length of the second part is 21 cm - 12 pieces. The length of the third part is 34 cm - 2 pieces. You can start by making a drawing of the table.
• The timber is placed in three rows. At this stage, you need to leave a small gap so that you can place the table legs there later.
• Remove two rows from the top. We begin to move the rest of the timber. This way the table will turn out to be original appearance. Then we make markings for the transverse parts.
• We lay the outer bars of the second row and put marks for the cuts. The cuts can be made with a hacksaw or saw. After which we secure the bars with screws.
• Let's move on to the third row. We shift the parts a little and secure them.
• Empty spaces appeared under the tabletop. They are for feet.
• The table needs to be processed protective composition.

Original coffee tables

Every person wants to have in their apartment regular table so that it fits into the interior of the room and pleases the eye. This piece of furniture can be made from any material: wood, chipboard, drawers, etc. Let's look at several of these options.

Table made from waste paper

If there are old magazines and newspapers in the house, there is no need to rush to throw them away - perhaps they will serve you as material for the table. True, the interior design must be appropriate. By making furniture in this way, you can choose the table height you need and is comfortable for you. Process making a table from old newspapers and magazines height:

• We take waste paper and roll it into a tube, securing it with money rubber bands.
• We dilute the water-polymer emulsion. And put the rolled paper in it for 2–7 minutes.
• Then we dry the paper.
• We glue the bunch of cabinets with glue, you can use PVA. Dry in vertical position, secured in advance with thread.
• We mark the strips and cut them.
• We glue the glass tabletop. The glass should be 12 mm thick.

Gallery: coffee table (25 photos)

Stylish table made of logs

This method is more complex in terms of execution than the previous one. The main elements for creating a table will be logs. It is taken as a basis wooden box, preferably on wheels. After which it must be furnished with logs. A homemade surface planer is also used for marking. After sawing off all unnecessary elements, there is no need to throw away the sawdust. It is better to collect them in any pallet. After this, the round pieces are glued to the surface. Sawdust must be mixed liquid nails. The mixture should resemble plasticine. Using a spatula, it is necessary to rub all the cracks between the rounds. Then, the product must be removed from all sawings and dirt, sanded and varnished.

DIY coffee table (video)

Creative curved table

Make a table like this It will be difficult on your own, but still possible. The main thing is to follow the manufacturing rules. For the design you need to take any type of wood. You choose the height yourself. The basis is taken from the property of wood, such as softening during dry heating. After which the form is saved. More details about production:

This table option is for those who love functionality and beauty in one item. With the help of simple manipulations he able to change height and appearance.

When assembled, it is a regular table for various waste paper. One has only to lift the two sides with the legs, and it changes its usual size and turns into a dining room.

Another transforming system is based on metal frames-pedestals. They are attached to the tabletop. In their usual position, that is, when assembled, they lie horizontally; if you change the size, the lid rises and rotates on hinges and becomes vertical.

When unfolded, the size of the structure is 73 cm. This height is acceptable for computer desk. Before making a transformer, you need to make a drawing.

DIY coffee table

For the manufacture of coffee table you need to take a sheet of chipboard. Its thickness is 16 mm. Make markings: find the center at the intersection of two diagonals. A nail is driven into the center, to which a thread and a pencil are tied. With its help you can draw a circle. If you want to make a table of a different shape, then draw the bends. After this, the shape is cut out using a jigsaw. The edges must be sanded.

The legs of the table are attached with screws. Paint the countertop itself in the color you want.

Table on wheels

If you have never made tables with your own hands, then you can try the simplest option. Let's consider making a model from chipboard. To make it you do not need a lot of knowledge and skills and expensive materials.

You can order cutting of laminated chipboard.

To make the structure you will need: a table top, planks, a shelf, a bottom, wheels, plastic corners, self-tapping screws, confirmations. When all necessary materials Yes, you can start assembling:

• First you need to make a shelf.
• Connect the table top and planks to plastic corners. The result is vertical slats to which you need to attach the shelf using a confirmant. To make her hold on tighter. the same must be done with the bottom.
• We attach the wheels using screws.
• At the very end, you need to seal the attachment points using self-adhesives.

As we have already found out, making a coffee table at home is not difficult. The article presents options that everyone can handle. Over time, you will be able to create the most original designs.

The height of a coffee table according to GOST should not exceed 50 cm, but no one forbids adjusting it to suit yourself. For example, the height of the transformer can be 73 cm. It is also worth noting that the table should fit your interior. Self-production Making such a piece of furniture is a fascinating process that will also save you money. A little imagination - and you already have an original product ready.

Making furniture with your own hands is not only a great way to save money, but also an opportunity to put your creative potential into practice!

We will talk about making coffee tables with your own hands. There is no such thing as too many side tables. They can be placed next to the sofa to place a vase of flowers or a mug of tea, or used as bedside table or as a stand for potted indoor plants. However, monotonous wooden tables are unlikely to liven up a dull interior. I want something stylish and unexpected...

Stylish table made of wooden slats with your own hands

This bench can serve as a coffee table, extra seating or storage space indoor plants. This piece of furniture will “fit” well into almost any interior!

DIY coffee table photo

Materials:

Tools:

Step one: Using a hacksaw, cut the ends of two 2.5 x 7.5 cm boards at a 45 degree angle. Cut out fragments from 2.5x5 cm bars, the length of which will correspond to the internal length of 2.5x7.5 cm blanks.

how to make a coffee table with your own hands. Photo

Step two: Place 2.5x5 cm of the workpiece in the middle, and 2.5x7.5 cm on the edges. Make sure the ends of the inner slats are aligned.

Step three: Measure the distance between the outermost 2.5x7.5 cm bars and cut two pieces of this length from 2.5x10 cm boards. They will serve as lower supports for the bench. Secure them by screwing self-tapping screws into each longitudinal rail.

Step four: Using a Kreg Jig, drill two pocket holes at each end of the support crossbars. These holes will be used to connect to the 2.5 x 7.5 cm edge bars.

Tip: It is difficult to give specific recommendations regarding how far from the edge to attach a Kreg Jig. This depends on the length of the screws used, the exact thickness of the board, etc. We advise you to first practice on unnecessary scraps of boards.

unusual do-it-yourself coffee table. Photo

Step five: Place 2.5x7.5 cm blanks along the edges of the structure. After making sure that their ends are at the same level, secure them with clamps.

Tip: If you use soft wood (for example, pine) to make the table, place unnecessary scraps of boards under the clamp supports. Otherwise, marks from the clamps will remain on the wood.

Step six: Securely attach the outer 2.5x7.5 cm bars to the base of the bench by screwing 3.5 cm screws into the countersunk holes that you made a little earlier at the ends of the support crossbars.

coffee table made of wood. Master Class

Step seven: Measure the width of the fabricated base to determine how long you need to cut the 2.5 x 7.5 cm blank for the ends of the bench. We recommend that you make a cut with a small margin in length, and then slowly grind off the excess until you achieve the perfect fit.

Step eight: Wet the ends of all slats with water and apply a large number of Gorilla Glue.

Step nine: Place the end boards in their intended place and secure the entire structure with a belt so that it does not fall apart while the glue is wet. For reliability, you can additionally secure the ends with several finishing nails.

Step ten: Sand the surface of the bench with 120 grit sandpaper to remove any rough edges at the joints. All gaps in seams and indentations from nail heads (the latter in mandatory must be recessed into the wood) fill with putty. Once the putty is dry, sand the surface again, this time with 220 grit sandpaper.

Step eleven: Paint the bench. We advise you to sand the surface again using sandpaper 400 grit and water.

Step twelve: Install special mounting plates on the lower support crossbars to secure the legs. When attaching them, make sure that you drill holes in places where there are no screws already screwed in. The distance from the fastening to the edge of the base of the bench should be about 2.5 cm. Screw the legs themselves into the fastenings.

Coffee table made of copper pipes. Master Class

The material for making the next table can perhaps be called the most unexpected. This time we decided to tell you how to make a table with your own hands from... copper pipes OK.

Materials and tools:

The picture below shows all the parts (pipes (A-E) and various connecting elements(F-H)) indicating their sizes and quantities. All that remains for you is to take it in your hands pipe cutter and sit in front of the TV, which will brighten up the tedious cutting process a little. It's not difficult, just a little boring. 😉

When all the pieces are ready, you can begin assembling the lower part of the table. How to do this is shown in the figure.

Having assembled the lower tier, you can proceed to the upper one. The only parts not listed in the parts list are the four 2.5cm pieces of pipe that fit into the tees at the top of the corner posts. Without these inserts you will not be able to put on decorative caps, because... the latter have the same diameter as the tees.

Reliable connection of the tubes with each other will ensure glue, but we recommend applying it only after preliminary assembly of the structure, i.e. after you make sure that all the cut tubes are the correct length and fit together well.

Wooden shelves, which you can pre-paint if you wish, are secured using special clamps that are placed on the underside of each board. Now you're ready to decorate your home with a new, handmade table!

DIY lightweight cement table

Concrete countertops and other interior elements in Lately are becoming more and more popular. However, for all their attractiveness, they are not without a number of disadvantages. Firstly, pouring large quantities of concrete can sometimes be quite an expensive undertaking. Secondly, when it comes to small side tables, another serious problem emerges - such furniture turns out to be too heavy. On the one hand, there is a desire to get a good, solid thing, on the other hand, you want to be able to move a table you made yourself without the help of professional movers. The solution found can be considered an insight.

Materials and tools:

Step one: Mark and cut out the foam sheet. From a 120x240 cm piece you can cut 18 squares of 40x40 cm. By stacking them on top of each other, you will get a parallelepiped 40x40x45 cm.

DIY foam table. Photo

Step two: Glue the cut pieces together. 3M Super 77 aerosol adhesive is ideal for this. It is better to perform this stage of work outdoors. Don't forget to wear gloves and a long sleeve shirt. Apply an even layer of glue to one side of the first square, then do the same with the second. Wait ~15 seconds, then connect the squares, making sure their edges meet. Repeat this until all the square pieces are joined into one piece. Wait about 30 minutes before moving on to step 3.

Step three: Now the most interesting thing... giving the resulting parallelepiped the outline of the future table. We decided to make a table in the shape of a cylinder. You can come up with something more original or, on the contrary, keep the original block with right angles. Cutting foam is easy and fun. Your design will have a rough, angular appearance at first, but don't worry! Once the table has been given the desired shape, it is time for sanding. Using 36 grit sandpaper will quickly smooth out any rough edges. As you get closer to the ideal, gradually move on to sandpaper with a finer grain size. Do not strive to achieve a super smooth surface; at this stage it is important for you to achieve only the required shape.

Step four: The surface of the future table has been sanded, it’s time to cement it. The first layer, applied over the entire foam mold, will fill in the voids and texture of the foam. You only have ~20 minutes, so work quickly so you have time to smooth out any rough edges. Once the applied cement mortar has dried, you can apply the next layer. The number of layers depends on how smooth and flat surface you want for the final finish (usually four to five coats are required). It should be remembered that the smoother the surface of the final layer before it dries, the less sanding it will have to do!

Tip: When cooking cement mortar follow the manufacturer's instructions. You should not prepare more mortar than you need to apply one layer (for example, we used 220 ml of water and 450 g of cement). Make sure you don't forget to cover the surface of your workbench or workshop floor, because this job is quite dirty.

Step five: After the last cement layer has dried, you can sand the surface if desired. We wanted to achieve a glossy finish on at least the top of the table, so we sanded it using varying grit sandpaper ranging from 100 to 2000 grit.

Advice: If you are planning this operation, purchase protective mask, which will help you protect your lungs from cement dust

(The table made in this project turned out to be very durable and strong, but at the same time it weighed no more than a kilogram.)

DIY stump table

The material for the next table is sometimes literally lying under your feet. Even residents of megacities will be able to find a suitable stump if they wish.

log table. Photo

Materials and tools:

• wooden block;
• white acrylic paint;
• hand grinder;
• chisel;
• hammer;
• decorative upholstery nails;
• molar tape.

Step one: Find a table base! This should not be an old rotten stump, but a freshly cut log. Allow it to dry for at least 6 months (nothing is worse than waiting, but it must be done) until the bark begins to separate from the trunk.

Step two: Using a chisel, use a downward motion to carefully scrape away the bark from the log. If the stump is dry enough, you won't have to use too much force to do this.

Step three: Using a sander with medium-grit sandpaper, sand the surface, removing any remaining bark and smoothing out any rough edges. Don't forget to sand the surfaces of the lower and upper cuts. Wipe the wood with a damp cloth.

Step four: It's time for painting. We used white semi-gloss paint that included a primer (we needed three coats for full coverage). You can choose a different type and color of paint, focusing solely on your taste. Don't forget to prime the surface of the wood first. Make sure you don't forget to trim the bottom cut.

Step five: Prepare decorative nails. Place a strip of masking tape along the top edge of the side surface of the block, thereby marking the place where the first row of nails will be located.

Step six: Use a hammer to hammer in the first row of decorative nails. To ensure that the distance from them to the top edge is the same throughout the entire “line” of nails, use the strip of masking tape you previously glued as a guide. Once the first row is completed, repeat with the second and third row of nails (we needed almost 150 nails for three rows).

Tip: Beat it bottom surface stump with furniture felt so that you can move the table around the room without damaging the floor covering.

The work is done. You can enjoy your new piece of furniture and be proud that you made this charming coffee table yourself.

Coffee tables: do it yourself

Wooden table: how to make?

Many people are interested in how to make a wooden table with their own hands to get a model with an original appearance. Let's consider one of the options.

To make an original coffee table with your own hands, you should take timber with a section of 5x10cm. It is cut into pieces of the following lengths: 130cm - 9 pieces, 21cm - 12 pieces, 34cm - 2 pieces.

The prepared timber is placed in three rows, leaving space for attaching the legs.

The top two rows are removed. The timber in the third row is moved slightly to create an interesting appearance. Next, mark the places for attaching the transverse parts.

Lay the outer bars of the second row and mark the places of cuts. Then the cuts are made circular saw or a hacksaw with a chisel.

The bars of the second row are secured with screws.

Lay the third row, move the parts and secure them.

An empty space is formed under the tabletop, in which they fix legs.

The wood is processed protective composition, preserving the wood texture.

Original model of a wooden coffee table with your own hands

First, to make a table with your own hands, prepare planks: 6pcs - 22.5x45cm, 2pcs - 22.5x41cm, 8pcs - 20x4cm, 8pcs - 40x4cm.

Planks 20x4 and 40x4 are glued in pairs. To ensure they stick together securely, they are clampedclamps.

While the leg blanks are drying, assemble box from the remaining parts. They are connected with wood glue and nailer.

Legs They are attached to the box with countersunk screws. Crossbars are placed between the legs at the bottom.

cover for a wooden table they are also made using 22.5x45cm planks. They are glued together, and then the resulting square is sawn into two triangles.

One triangle is secured with screws, and the second triangle is secured with slats so that it is removable.

All parts are sanded and painted.

Stylish coffee table. Master Class

Start making a stylish table with your own hands by marking the sheet Chipboard 16mm thick. The center is found on the sheet at the intersection of two diagonals.

A nail is driven into the center, to which a thin rope or harsh thread is tied.

A pencil is tied to the free end. This allows you to draw a circle.

If you want to make a table with your own hands that is not round, but of a more interesting shape, then the shape of the circle is changed by drawing curves.

The table top is cut out jigsaw or a reciprocating saw.

Edges are processed sandpaper.

Legs secured with screws. If they are located obliquely, then the slope should be outward.

Table surface paint in the desired color.

Simple coffee table

To make a coffee table with your own hands, take boards 40x15cm - 2 pieces and 50x19cm - 2 pieces. In addition, you will need legs and mounting plates.

A larger one is fixed on one of the boards plates for attaching legs. You should step back a little from the edges.

Lateral and top part The table is secured with wood glue.

It dries in about half an hour.

DIY log table

A self-made coffee table with this appearance will decorate your cottage or country house. Work begins by assembling the frame. To do this, take sheets plywood two centimeters thick. A base with dimensions of 60x80cm is cut out of them. A box 68cm long, 45cm wide and 40cm high is attached to the base.

DIY log table. Photo

After this, thirty round pieces are cut logs 45 cm long and twenty-four round cuts, the thickness of which is 3 cm.

The prepared logs are secured around the perimeter of the box. Fixed from below to the base rollers. They are installed at a distance of three centimeters from the edge.

In addition to glue, it would be useful to secure the logs with screws from below.

Installed on the box plywood cover. Round circles are glued onto it. The space between them is filled with wood putty, which does not shrink when dried. Apply it in stages so that the previous layer has time to dry.

After the putty has dried, the surface polished. For this, a surface grinder is used. After this, the log table can be used.

Country style table

If you are interested in how to make a table from wood cuts with your own hands, then you should read the instructions.

They begin making such a coffee table with their own hands by choosing the appropriate material.

Selected slept We inspect for any interesting parts or parts that need to be removed.

Excessively rough, protruding parts are cut off. On the side where the tabletop will be, the surface level.

Used for work cleaver, which moves at an angle of forty-five degrees.

The sides also need to be leveled.

All surfaces polished, using ever-decreasing grain sizes.

Glossy varnish mixed with resin in equal parts.

The resulting composition is applied to the wood in a thick layer. It will take a long time to dry. If cracks appear during the drying process, they must be filled.

Bottom side clearing out. If there are voids in the tree, they are filled with resin gradually until the hole is filled.

If there are air bubbles in the dried resin, the surface is heated with a heat gun or burner.

A second layer of resin is applied and again left to dry for two days. The entire surface of the tabletop should be glossy.

The part of the ax handles is cut off at an angle of 22 degrees. The surface is sanded and painted in the desired color.

Mark places for legs and make holes.

Glue is poured into the holes and the legs are installed. Special pads are attached to each.

White coffee table

Make such a coffee table with your own hands from plywood And glass First, prepare a drawing and determine the dimensions. Then they proceed directly to production.

DIY coffee table. Blueprints

Plywood acts as a tabletop box with partitions, covered with glass on top. Triangular legs are attached to it.

You can make a door at the box to access what's inside, or you can lift the glass.

LegsFor a table with your own hands, it is better to cut it out of fairly thick plywood. It must be remembered that double legs are easier to make than large quantity single.

When all the parts are ready, they are assembled together and fastened. The table is painted or varnished.

DIY table made from pallets

If you know how to make a table from pallets with your own hands, you can get an interesting version of furniture for your home. Pallets must first be sanded, sawn into pieces and primed.

table made from pallets. Instructions

A table is assembled from the prepared material. To do this, attach legs or wheels. A pallet directly or a surface assembled from individual planks can be used as a table cover.

After all the parts are connected, the structure needs to be painted or varnished. After this, the table made from pallets is ready.

Second version of a table made from pallets

To make such a table with your own hands, you will need one or two pallets. You should first draw a sketch of the future product, taking into account all dimensions.

The table will have a shelf for small things under the table top. The structure is assembled from prepared parts.

The surface is painted black, but this is not the only possible variant. There are many other decorating possibilities.

Coffee table stand

Option on how to make a table from copper pipes with your own hands, may be of interest to many craftsmen.

The pipes are first marked and cut. Then they are coated epoxy glue and assemble the base for the table.

This base is applied to the board and the fastening points are outlined. In these places you will need to drill holes by pipe diameter.

Four holes are drilled, but not all the way through.

The board is impregnated polyurethane and cover stain.

The remaining one is collected from the pipes frame.

Legs and base cover paint in the color of the tabletop.

Made from a piece of cloth pocket, which is hung on the transverse parts of the legs.

All parts are assembled together, adding epoxy glue for reliability.

DIY marine style table

This table is from an old one window frame looks very romantic. The frame is cleaned of dust. If necessary, replace the glass.

Wooden surface paint white acrylic paint. After drying, the paint layer is sanded so that the wood appears. An option is also available in blue and white.

To make the legs, take stalk and sawed into pieces of 34 cm. After this, it is treated with sandpaper to remove roughness.

The blanks are drilled in four places. Next, each leg is attached to the base, and the base with legs is attached to the frame. All this is done with self-tapping screws.

The legs are covered with coarse rope.

For peeled and low-fat glass glue sea souvenirs and seafood. They must be covered with glass on top, which is cut in the workshop to the size of the frame.

A loop is made at one end of the rope. The rope is glued around the perimeter of the frame, leaving the loop free. When the other end reaches it, an interesting sea knot is tied.

If you suddenly want to make something for your home with your own hands, then it is very important to understand what will actually be useful and will not be very difficult to make. First of all, think about doing . A small chipboard table is a wonderful decoration general view space, it does not take up much space and is very easy to assemble. You just need to remember a few simple steps and you can quickly create a beautiful coffee table.

Preparing for assembly

First of all, prepare the tools that you will need to make a table from chipboard, namely:

• hammer;
• construction tape;
• screws;
• screwdriver;
• furniture pipe with a diameter of 30 mm;
• flanges for pipes;
• jokers;
• a hacksaw (if possible, a jigsaw);
• rubber wheels;

For making a table from chipboard, laminated material with a thickness of 16 mm is perfect.

Figure 1. Coffee table assembly diagram.

You can use dowels to fasten parts. Place them on glue. In addition, in order to make a coffee table, you will need:

• wheels and screws for fastening them;
• glue for joining the profile and chipboard.

Create drawings of each piece of the chipboard table. Place the cut out patterns of the parts on the material. Trace them with a pencil. After this, wherever possible, scratch the outline with a sharp nail - this way the material will not chip when sawing. Saw along the outside of the future part.

On the patterns for the bottom of the table and tabletop, print the outline of the docked legs. Transfer these contours to the parts, draw a center line. Mark 3 holes for dowels. Using an 8mm drill bit, drill holes to a depth of approximately 12mm. To control the drilling depth, it is convenient to use regular electrical tape (wrap it around the drill).

Next, on the inner ends of the legs you need to mark the holes for the dowels. They are necessary to hold the shelves. Measure 8 mm from the plane of the parts and the same amount from the beginning of the bend. For convenience, you can use the following drawing: Fig. 1.

To finish the ends, use a flexible U-shaped profile. The texture of the profile must match the color and texture of the chipboard sheet. It is better to use an overlay profile that wraps around the part on both sides and does not require a groove for fastening.

Return to contents

All ends of the parts from which the coffee table will be made must be sanded. For convenience, you can pull it on a flat block. For visual control, you can scratch the line. Strip down to it and stop. It is necessary to control the perpendicularity of the plane of the block with sandpaper and the plane of the end of the part. If there is no perpendicularity, then when joining the parts, gaps will be noticeable.

Coat the ends of the parts with glue (liquid nails). Place the profile on the ends. The most important thing is to hold the knife perpendicular to the plane of the end of the part. Cut the bottom profile a little and remove the trimmings. If everything is done correctly, the profile fits almost perfectly. It will be more accurate if you first glue the profile, and only then cut it. Cut along the end.

The shelves and legs that the coffee table will be equipped with are also very easy to fit together. You need to glue the profile onto the legs, and then make holes in it for the dowels in the place where the shelf will be attached. Coat the end of the table shelf with glue. Connect the leg and shelf using a dowel without glue. Place the profile on the shelf, pressing it against the leg profile. Cut the profile from the opposite side at the end.

There is no need to immediately wipe off the glue that has protruded onto the surface of the part from under the profile. Wait until it dries a little. This will make it easier to remove. Otherwise, you will stain the part even more.

Return to contents

Step-by-step instruction

You can buy chipboard, or you can make a coffee table from some old furniture. For example, old cabinet doors are suitable for this.

Cut 2 tabletops measuring 100x50 cm - you get the base (bottom shelf) and the tabletop itself. Screw the flanges to the countertops. Step back 6-7 cm from the smaller side and draw parallel line. Repeat these steps on each countertop on both sides.

As a result, on each part of the board you will get 4 intersection points. It is in these places on both tabletops that the flanges need to be screwed. Screw the wheels to the tabletop. It is better to use rubber wheels, because... They are more reliable and durable than plastic ones. Once the wheels are in place, insert the pipe base into the flanges. Secure them with bolts.

To ensure that the coffee table does not wobble and is stable, it is necessary to connect adjacent supports using pipes. This is very convenient to do using a joker, which should be secured in the middle of the pipes.

To make your coffee table more comfortable and beautiful, you can make a glass shelf between the table top and the base. To do this, do in the following way. Replace pipes that run parallel to the long side special pipes with shelf fastenings. After that, cut out the glass suitable size and insert into the mounts.

Return to contents

Top varnish coating

When covering the table with varnish on water based It is best to use a brush with polyester or nylon bristles.

To prevent premature destruction of the product, you can coat it with varnish. This coating provides good protection from moisture. Prepare tools and materials:

• wash;
• rags;
• sandpaper;
• grinder;
• primer;
• roller;
• brush;
• stain.

The procedure depends on whether the product was previously coated with varnish or paint. The old layer of any paint and varnish material must be removed. Only after careful processing can you begin recoating. To clean the table from paint and varnish materials can be used mechanical, thermal or chemical method removal. If you use a chemical remover, it must be applied to the surface to be treated using a rag and (usually after 10 minutes) wipe the table with a dry rag.

To delete old paint or varnish using thermal method, will be needed construction hair dryer. It is necessary to warm up the surface and remove the old layer using a rag.

To clean the surface from old varnish or paint mechanically use grinder and a small piece of sandpaper. Gently clean the surface at low speeds, as... at high speeds wooden surface may be easily damaged.

A layer of varnish can be applied using a roller or brush. If you use a colorless varnish for your work and want the coffee table to have a beautiful shade, then you first need to apply 1, 2 or several layers of colored primer or stain. If you do not use stain, then the surface of the table must be primed with at least 2 layers. This will reduce varnish consumption and eliminate minor irregularities.

Use a water-based primer. Available for sale a wide range of such a primer of various colors or colorless. After applying a layer of primer, you need to wait until the surface is completely dry. This takes about 12 hours. Apply a layer of varnish and leave the chipboard table for a day for the layer to dry completely, then re-coat the surface.

Buying new expensive furniture is a financially expensive option. As alternative option For those who love exclusive and unusual interior details, the handmade method is suitable.

Minimal experience in using tools, imagination and creative thinking- that's all that's needed.

You can start by making a coffee table, for which a variety of and unusual materials are used.

The finished product will decorate and diversify any room, living room or nursery. Often unusual furniture installed in country houses and on summer verandas, there she emphasizes the style and brings the desired atmosphere.

Tools and materials

The basis of the future table is the material from which it is planned to make the tabletop. There are many options for imagination, we will consider them below.

In addition, the work will require the following tools:

• hammer;
• scissors;
• pliers;
• fasteners (nails, screws, etc.);
• carpenter's table with a set of knives (if available) or a hacksaw.

Work for carpenter's table requires additional skills. If you have them, you can use a chisel, cutter and plane. When working with wood, they can be used to perform more delicate work.

Using a sharp chisel or set special knives There is an opportunity to skillfully decorate a coffee table.

Need to stock up additional materials, such as:

• glue;
• sandpaper;
• paint (preferably in the form of a spray);
• primer;
• decor (fabric, multi-colored plastic, lace, glass parts, etc.).

Wooden coffee table

The most common material in the manufacture of furniture structures is wood. Even if it is chosen as a basis, the creator has several options.

The product can be made from:

• pallets;
• whole stump;
• logs

A beautiful and practical coffee table made from pallets is made in several stages:

• At the first stage, it is necessary to determine the dimensions of the future table and make markings on the pallets.
• Cut out the core of the pallet. It is important to take into account that the outer side should be smooth, and the reverse side should be embossed.
• Treat the legs with primer and let them dry.
• Paint the countertop on all sides. Tinting can be done in several layers. In this case, each layer must be treated with fine-grained sandpaper.
• After all the parts have dried, secure the elements using metal fasteners: nails, screws, etc.

Making your own table from a solid stump is even easier. The difficulty lies in choosing a piece of wood that is suitable in size and shape. From an aesthetic point of view, a pine, birch or poplar stump is suitable for such a table. The choice should be made on a flat and wide specimen with unusual rings.

The material can be used in different ways depending on the size of the table:

• short with thin metal legs;
• middle, where the base of the stump serves as a support;
• low on wheels.

According to the artist's idea, the stump can be subjected to minimal changes, limited to painting or varnish coating. Give classic look The product will be helped by grinding and installing wheels.

Note!

Another option for lovers of natural style is a coffee or coffee table made from logs. Its production does not differ significantly from previous versions.

View finished product almost entirely depends on the appearance of the prepared wooden log house. Options may differ in the width and expressiveness of the ring pattern.

First you need to treat the logs with a piece of sandpaper. To maintain the most natural appearance, leave the bark on the sides and bottom. Legs made of metal or from an old table will give a more formal look. If desired, the supports can also be made of wood.

Making a coffee table out of wood is not a difficult task. Such a product brings a certain amount of pristineness and natural comfort to the home decor.

Chipboard coffee table

Exclusive furniture based on chipboard is a cost-effective option for those who want to work on the product themselves. This photo of a coffee table shows that such furniture is in no way inferior in appearance to a wooden product.

Note!

You need to start work by developing a drawing of the future table. The finished patterns of the base and legs are placed on a sheet of chipboard and outlined with a pencil, and then scratched along the contour with a nail.

Thus, you need to cut out two tabletops, one of which will be the surface of the table, and the other will be the bottom shelf. You need to attach flanges to them, and secure the wheels with bolts.

It is preferable to use rubber wheels because of their reliability. Will diversify the appearance glass shelf between the table top and the base. Varnishing will protect the item from premature destruction.

You can make such a table yourself from old unnecessary furniture. Decorative elements will help renew and inspire new life into an old interior element.

There are many interesting options coffee tables made of: glass, radiator, window and books, front door, cabinet or chest of drawers, suitcase, reel (cable), etc. Anyone with imagination and a sense of style can come up with additional options.

Decoration

The decor of the coffee table is the final and very important stage of the work. Any ideas that fit into the interior of the room are suitable here.

Note!

Let's consider the most correct and harmonious options:

A table made of pallets, stumps or logs will be decorated with a carved design. The tabletop may not be made of solid glass, but of many pieces glued together.

The use of fabric in decoration should be careful. Material with thin pile is suitable for this purpose. Use your old coat as a base and secure with small nails and rivets.

Vintage notes will be added by lace and fringed ribbons attached around the perimeter of the item. It looks as if there is a tablecloth on the coffee table.

A recent fashion trend has been the use of twine and coarse hemp rope. Attaching it is quite simple. You need to lubricate the surface of the table with glue, and tightly wrap the base and legs of the table.

The decor in the form of a mosaic looks bright and unusual. Varnishing the surface will add additional shine.

Decoration using decoupage technique. This type of decor allows you to apply any image to the surface of the tabletop. To do this, you will need special napkins for decoupage. The quality of the result depends on the availability of the necessary technical skills.

In any decoration it is important to take into account the practicality of the finished product. coffee table and its sustainability. To do this, use additional fasteners, stain treatment and varnish.

Implementing ideas in practice is not difficult if you approach the process with intelligence, imagination and great enthusiasm.

DIY coffee table photo

Today I will tell you about creating a coffee table. In principle, it is not as difficult as it seems, you just need to have everything necessary tools and desire. And for work we need this:

• furniture board or laminated chipboard;
• jigsaw;
• electric drill;
• roulette;
• pencil and ruler;
• clamps;
• decorative edge and iron;
• different fasteners;
• rollers;

Making a coffee table on wheels with your own hands

So how do we make a coffee table with your own hands With at the lowest cost and at the same time so that it has an original shape?

First of all, we turn on our imagination and come up with the shape of the table, then we draw its diagram and decide on the dimensions. I came up with my own diagram of a coffee table and this is what its drawing will look like.

Coffee table diagram

Dimensions of the top cover of my future piece of furniture self made– 75x55 cm, and the bottom – 65x45 cm. The side parts have an arbitrary figured configuration. The middle shelf will serve as a stiffening rib with dimensions of 55x25 cm. Coffee table height will be equal to 50 cm without taking into account the height of the wheels. Having marked all the elements on the slab using templates, you can start cutting them out.

Marking the chipboard

To ensure that as few chips as possible are formed when sawing with a jigsaw, you need to draw firmly along the cut lines several times. sharp knife.

To saw a chipboard board, we use a file with the smallest tooth and set the jigsaw to a reduced speed. When working, we try to guide the jigsaw evenly along the cutting line, eliminating the appearance of waves. If one does appear, then you can trim the cut with a rasp, using a “pull-away” movement. So, first we cut out the rectangular parts of the coffee table with our own hands.

We cut rectangular pieces of chipboard

Then we proceed to the side ones. To make both sides exactly the same, we will cut them together. To do this, we fold two blanks “facing” each other and tighten it all with clamps. Then we apply markings according to the template and cut out the outer outline. To saw inside the workpieces, you need to drill holes with a diameter of at least 10 mm in the corners of the drawing. Insert the jigsaw blade into the hole and begin sawing. This way we get rid of the internal areas and get the same sides.

Cutting out the inner parts of the side panels

All our components of the table are ready, now we need to paste over all the sections with decorative furniture edge(and if you modernize this one a little, then the edge of the table will look much more decorative). This is done using a hot iron. We place the tape with the adhesive side on the cut side and align it with the edges. Then, holding it, iron it on top with a hot iron. We do this with our own hands with all the external and internal sections of the elements of the coffee table.

Glue the decorative edge

If the width of the tape is greater than the end of the slab, then the extra part cut with a sharp knife, and carefully blot the cut of the tape with stain (you can use an ear stick).

Now we mark the attachment points for the middle part of the table - the shelf and the sides. The fastening here will be special screws for furniture - confirmats. Given the special structure of this fastener, you will need a special drill to drill holes for it. If there is none, then you can use three ordinary ones: under the screw part, under the expanded part and under the cap. By drilling holes you can fasten the shelf and sides.

Assembling the middle part of the coffee table

Next we will attach the completed middle part to the top cover. To do this, we will place our elements in the position in which they should be in the finished table and mark the places for metal corners and holes for screws. Then we will fasten these parts of our table.

Screw the middle to the top cover

We turn the coffee table over with our own hands and similarly connect the structure to the bottom lid, using the same furniture metal corners. Next, we put our table on wheels. We mark the installation locations of the rollers on the bottom side and secure them with screws.

Screw on the wheels

That's all! Our handmade coffee table is ready! IN new year holidays You can successfully place something like this on it or beautifully serve a romantic dinner. Just like that, without using much effort and without calling on specialists for help, and especially without spending family budget, you can get a very useful piece of furniture.

Our original coffee table

By the way, such a piece of furniture can be used for further decoration - decoupage, painting or appliqué, it all depends on you and your desire to decorate the interior of the room.

Haven't subscribed to our blog yet? In this case, you lose the opportunity to get more useful information and participate in competitions among subscribers. Think! In the meantime, see you in touch and good luck to everyone!