DIY transformer coffee table. Transformer coffee-dining table: how it differs from others and how a wenge transformer table assembly is created

transcript

1 Parts list: Convertible table Assembly instructions Pos. Description Dimensions Qty. 1 Top cover 800x Bottom cover 800x Small cover 320x Bottom 640x Horizontal 666x Side drawer 666x Front, rear drawer 666x Support 129x Decorative corner 196mm Eccentric 25mm. Euroscrew 70mm Bolt M6x16 Screw 4x16 with faceplate Hidden hinge d=10mm Reinforced shock absorber Wheel support Dowel self-tapping Lifting mechanism Fast mounting dowel Page 1 of 6

2 Assembly sequence: 1. Using euro screws 70, screw the part (pos. 4) to the parts (pos. 8). See figure Screw part (pos. 5) to parts (pos. 8) using Euro screws 50. See Figure 2. Figure 1 Figure 2 3. Drive in the dowels and install the 16mm eccentrics into the part (key 5). See Figure 3. Figure 3 4. Screw the self-tapping dowels into the pieces (key 9). See figure Install the quick fix dowels and 25mm eccentrics in the part (pos. 6). See figure Fit quick dowels, 25mm eccentrics and reinforced shock absorbers in the part (pos. 7). See Figure 6. Figure 4 Figure 5 Figure 6 Page 2 of 6

3 7. Insert the parts (pos. 9) into the part (pos. 6) and tighten them with 16mm eccentrics. See figure Insert the parts (pos. 7) into the part (pos. 5) and tighten them with 16mm eccentrics. See Figure 8. Figure 7 Figure 8 9. Insert the assembled parts (keys 6, 9) into the parts (key 7) and tighten them with the cams on the parts (keys 7, 5). See Figure 9. Figure Before attaching the lift to the transformer table, the lift must be assembled. Install one end of the spring into the hole located inside the lifting mechanism. See Figure 10. Figure Insert a metal stud into the second end of the spring and pull the stud over the first notch of the lift mechanism. See Figure 11. Figure 11 Page 3 of 6

4 12. Install the lifting mechanism to the assembled structure of the transformer table. See figure 12. Figure Screw the lifting mechanism to the parts (pos. 7) with the M6x16 bolt and M8 washer in 4 holes on each side. See figure Screw the lifting mechanism to the parts (pos. 6) with 8 holes on each side using the M6x16 bolt and M8 washer. See Figure 14. Figure 13 Figure Using an M6x16 bolt and an M8 washer, screw the part (item 2) to the top platforms of the hoist. See Figure 15. Figure 15 Page 4 of 6

5 16. Fold the table. Fit part (pos. 1) onto part (pos. 2). Attention! The center-to-center distance between the holes for the hinges is 14mm, i.e. the holes must be offset to each other. See figure 16. Insert hidden hinges into parts (pos. 1, 2) and fix them with 3x16 screws. See Figure 17. Figure 16 Figure Using an M6x16 bolt and an M8 washer, screw the part (item 3) to the bottom platforms of the hoist. See figure 18. Figure Install the shock absorber on the ends of the parts (pos. 6, 7) and on the face of the part (pos. 7). See Figure 19. Figure 19 Page 5 of 6

6 19. From the bottom of the transformer table on the part (pos. 4) screw the wheel supports with 4x16 screws with a faceplate. See Figure 20. Figure Cover the visible holes for the eccentrics and euro screws with self-adhesive plugs. The manufacturer reserves the right to make design changes to this model. Thank you for your purchase! Page 6 of 6

7 PASSPORT OF SET OF HOUSEHOLD AND ADMINISTRATIVE FURNITURE OOO "UFAMEBEL" Recommendations for assembling the product: 1. The product is packed in one or more packages of corrugated cardboard. Each package has a shipping label. Fittings, fasteners required for assembly are packed separately and are accompanied by assembly instructions. 2.Before assembling the product, it must be freed from packaging. Assemble the product on a flat and clean surface, after placing paper, fabric, corrugated cardboard on it to avoid mechanical damage. 3. The assembly of the product is made according to the holes made by the manufacturer. When assembling, use the assembly instructions with a schematic representation of objects. 4. To ensure the normal extension of drawers, shelves (in the corresponding elements), it is necessary to tighten the screws to the end and strictly in the center of the guide holes when fastening the guides. 5. The lamps used in the products are equipped with transformers only (wires and switches are not included). Furniture care and operation rules: To preserve furniture for a long time and prevent premature damage to the coating, the following recommendations must be observed: 1. The product must be used for its intended purpose; 2. The product is recommended to be used in a ventilated room, not subject to sudden changes in temperature, with heating and ventilation, with an air temperature not lower than +10C and not higher than +30C with a relative humidity of 45-70%. 3. It is not recommended to install heating devices (stoves, stoves, ovens, lighting elements, etc.), the temperature of which exceeds +80C when heated, - closer than one meter from the location of the furniture. This can lead to deformation of furniture panels, peeling of the edge and skin from the base. Exposure to direct sunlight can also lead to deformation of furniture panels and facing material. 4. It is necessary to protect the surfaces of furniture and its decorative elements from mechanical damage, which can be caused by exposure to solid objects, abrasive powders, as well as from excessive physical exertion. 5. When using furniture products, do not use excessive force to open doors, drawers and other moving parts. Their proper operation is ensured by adjusting the hinges, or lubricating the guide rails with paraffin or non-aggressive agents similar in their physico-chemical properties. 6. Do not place hot objects on the surface of the product without thermal insulation pads. 7. The surface of furniture should be protected from moisture in order to avoid swelling of frames, facades and countertops; It is unacceptable to get on the surface of water and liquids that dissolve paint films (alcohol, acetone, gasoline, etc.). 8. Care of furniture should be carried out using only high-quality cleaning and polishing agents specially designed for this purpose, in accordance with the manufacturer's instructions attached to them on the method and scope of their application. Dust is removed with a clean, dry and soft cloth (flannel, cloth, plush, etc.). If the furniture is made of dark colors, dark marks may remain on the fabric during wiping, due to the fact that the furniture is additionally treated with an environmentally friendly protective solution for the period of storage. 9. Furniture should be moved in an unloaded state, lifting it off the floor. 10.During operation, the screw connections should be checked; if they are loosened, they must be tightened to the stop. 11. Permissible load on glass shelves is not more than 5-8 kg. 12. Permissible load on the shelves of rotation elements is not more than 3 kg, provided that the load is evenly distributed over the entire surface of the shelf. Manufacturer's Warranty: The manufacturer guarantees that the product complies with the standards provided that the conditions of transportation, storage and operation of the product are observed. 1. The warranty period is 24 months for household furniture and 18 months for furniture in public premises from the date of purchase, subject to the conditions of transportation, storage, assembly (furniture supplied in disassembled form), product operation rules. Claims for the quality of furniture are accepted within the warranty period at the place of purchase with a receipt. 2. Warranty terms The manufacturer guarantees that the product complies with the requirements of GOST “Furniture. General technical requirements". Subject to these rules, the furniture will last for many years. The warranty will be voided in the following cases: Lightning strike, fire, flooding and other natural disasters; Faults resulting from overload; Mechanical damage, ingress of foreign objects into mechanisms, ingress of a large amount of liquid on furniture, etc.; Malfunctions resulting from normal wear and tear of the product; If there are mechanical damages, thermal effects or traces of effects or traces of exposure to chemicals on the furniture surfaces; Misuse; Intentional damage to the product; With an illiterate assembly of the product; In case of violation of the rules of operation of the product.

Parts list: Pos. Description Dimensions Qty. 1 Top front shield with decor. elements 1608x411 (1808x411) 1 2 Left support 1011x302 1 3 Right support 1011x302 1 4 Lower front shield 1608x430 (1808x430)

LLC "Ufamebel" Bed "Next" PM 1400x2000, 1600x2000 Assembly instructions List of parts: Pos. Description Dimensions Qty. Bed 1400x2000 Bed 1600x2000 1 Head back assembly 1460x101 1660x10

List of details: Bedroom "Сarolina-M" Wardrobe 3-door. Assembly instructions. Pos. Description Dimensions Qty. 1 Cover 1582x580 1 2 Left sidewall 2234x50 1 3 Right sidewall 2234x50 1 4 Bottom 1548x50 1

Bedroom «Carey Gold» Wardrobe 1-door Assembly instructions List of parts: Pos. Description Dimensions Qty. 1 Cover 451x582 1 2 Right sidewall 2108x554 1 3 Left sidewall 2108x554 1 4 Bottom 451x582 1 5

Bedroom "Carey Gold" Wardrobe 2-door Assembly instructions List of parts: Pos. Description Dimensions Qty. 1 Cover 901x582 1 2 Left sidewall 2108x554 1 3 Right sidewall 2108x554 1 4 Bottom 901x582 1 5

Virginia Bedroom Furniture Set Chest of Drawers Assembly Instructions Parts List: Pos. Description Dimensions Qty. 1 Lid 1072x470 1 2 Left sidewall 819x48 1 3 Right sidewall 819x48 1 4 Cornice 1020x89

Cary Gold Bedroom Wardrobe Assembly Instructions Parts List: Pos. Description Dimensions Qty. 1 Small sidewall 262x576 2 2 Left sidewall 2108x579 1 3 Right sidewall 2108x579 1 4 Horizontal

LLC "UFAMEBEL" Set of furniture for the bedroom "PETRA - M" Chest of drawers with a mirror (right version) Assembly instructions color: Wenge List of parts: Assembly sequence: Pos. Name Sliding lid

Warranty obligations 1) The manufacturer guarantees that the product complies with the requirements of GOST 16371-14 subject to the conditions of transportation, assembly and operation. Warranty period of operation

Warranty obligations) The manufacturer guarantees that the product complies with the requirements of GOST 637-4, subject to the conditions of transportation, assembly and operation. Warranty period of operation

Warranty obligations) The manufacturer guarantees the compliance of the product with the requirements of GOST 637-4, subject to the conditions of transportation and operation. Warranty period - 4

OOO "Alfani" furniture factory Instructions for assembling and operating furniture Children's "Rainbow" Flamingo/Cornflower Ladder chest of drawers 0x0x0 Russia, 00, Penza region, Penza, st. Ryabova, d. Phone: ()--,

LLC "UFAMEBEL" Wall "Sofi-M" Assembly instructions. Parts list Plinth Plinth cover 2370x45 2 Cabinet plinth cover 549x45 3 Plinth front, rear. 2368x00 2 4 Base partition 00x44 6 5 Base. front,

Furniture company "MiF" Product passport Instructions for assembling and operating furniture Modular system "Vega" Table 1100x750x550 (WxHxD) The product is produced in color: Bleached oak Russia, 440054, Penza,

Furniture company "MiF" Product passport Instructions for assembling and operating furniture Modular system for the bedroom "Maria" Chest of drawers 900x816x460 (WxHxD) The product is produced in the color: White - White gloss (mdf)

Rules for the operation and maintenance of furniture. Good furniture. Furniture should be stored and operated in closed heated rooms at a temperature not lower than +C and not higher than +0C and relative humidity

Create modular kitchens quickly and easily with pre-made furniture kits. Product data sheet Bottom kitchen cabinet 72BN1D1B-40 72BN1D1B-45 72BN1D1B-60 Case height 720 mm Case depth 560 mm Width

Furniture company "MiF" Product passport Instructions for assembling and operating furniture Modular system "Vega" Bed with drawers 2032x650x952 (WxHxD) Living room is produced in color: Bleached oak Russia, 440054,

Rules for the operation and maintenance of furniture. 1. Furniture should be stored and operated in closed heated rooms at a temperature not lower than +2C and not higher than +40C and relative air humidity from

Rules for the operation and maintenance of furniture. 1. Furniture must be stored and operated in closed heated rooms at a temperature not lower than +C and not higher than +0C and relative air humidity from

Rules for operation and maintenance of furniture.

Scheme and sequence of assembly Rules for storage, operation and care of furniture Furniture should be stored and operated indoors at a temperature not lower than +2 C and relative humidity

Furniture company "MiF" Product passport Instructions for assembling and operating furniture Bedroom set "Prestige" Bed, 0x0x0 (WxHxD) Body color: "Oak" Facade color: "Chocolate" / "Pearl" Russia, 00,

WARRANTY BOOK The manufacturer guarantees that the furniture complies with the requirements of TR TS 025/2012 "On the safety of furniture products", GOST 16371-2014. "Furniture. General technical conditions". Customs

White 4 690391 052328 JSC "KostromaMebel" Instructions for assembly and operation of furniture products REINA furniture set Wardrobe Reina 3

Rules for the operation and maintenance of furniture. Furniture must be stored and operated in dry and warm rooms with heating and ventilation, at a temperature of +5 0 to +40 0 C with relative humidity

LLC "Alfani" furniture factory Instructions for assembling and operating furniture Children's "Rainbow" Flamingo/Cornflower Chest 00 00x0x. Russia, 00, Penza region, Penza, st. Ryabova, d. Phone: () - -, -. Email

OOO "Alfani" furniture factory Instructions for assembling and operating furniture Children's "Rainbow" Flamingo/Vasilek Ottoman 0x00x0 Russia, 00, Penza region, Penza, st. Ryabova, d. Phone: () - -, -. Email

LLC "UFAMEBEL" Wall "Nicole" Assembly instructions Base 2370x450. List of parts: 1 Cover 2370x450 1 2 Front thickening 2318x144 1 3 Side thickening. left 377x144 1 4 Thickening side. right 377x144

OOO "Alfani" furniture factory Instructions for assembling and operating furniture Children's "Rainbow" Flamingo/Cornflower Corner cabinet 00x000x00 Russia, 00, Penza region, Penza, st. Ryabova, d. Phone: ()--,

Create modular kitchens quickly and easily with pre-made furniture kits. Product data sheet Bottom kitchen cabinet 72BN2D-60 72BN2D-80 72BN2D-90 Case height 720 mm Case depth 560 mm Case width:

Furniture company "MiF" Product passport Instructions for assembling and operating furniture Entrance hall "Xenia - 1" 1500x2150x70 (WxHxD) The product is produced in color: Wenge - Bleached Oak Ash Shimo dark - Ash

Rules for the operation and maintenance of furniture. 1. Furniture should be stored and operated in closed heated rooms at a temperature not lower than +2C and not higher than +40C and relative air humidity from

Chest of drawers «Silvio» four drawers Assembly instructions Important! Store for later use! Study carefully! Technical description The folding chest of drawers has a modern shape, made of laminated

Rules for the operation and maintenance of furniture PI.TRIA..00. Furniture should be stored and operated in closed heated rooms at a temperature not lower than + C and not higher than +40C and relative humidity

470, UR, Izhevsk, Pirogovo district, st. Trade, 5 e-mail: [email protected], www.mebelson.ru tel.: (4) 6-, 6-6, 6-6. TV cabinet "Chicago" Overall dimensions: 00 x 554 x 70 mm (L x D x H) Note: Furniture

Desk SP-Assembly scheme 9 Pic. Table assembly diagram 6 0 7а 6 4 5 6 9 6 7а 4 0 Fig. Scheme of assembling a large box Fig. Cabinet drawer assembly scheme 8 6 6 0 6 7 8 8 9 9 9 0 7 0 7 7 7 7b 7a 9 7a 9 4

Furniture company "MiF" Product passport Instructions for assembling and operating furniture Set of furniture for the living room "Nancy" Cabinet 1200x2x2 (WxHxD) The living room is produced in color: Wenge - Cappuccino gloss (mdf),

If the fastening of the connections is loosened, the screws must be tightened periodically. Operating instructions for furniture facades, based on MDF. Furniture facades are installed in cabinet furniture, which

Furniture company "MiF" Product passport Instructions for assembling and operating furniture Modular system "Vega-1" Wardrobe 00x2200x00 (WxHxD) The product is produced in color: Bleached oak Russia, 005, Penza, st.

Assembly instructions Alba bed (without base) Bed dimensions: Width: 800; 900; 400; 600; 800. Length: 900; 000. Operating conditions and recommendations for care. Dear buyer! Thank you

LLC "MFR" furniture factory "Horizont" Instructions for assembling and operating furniture Bedroom "Vegas" Cabinet TV 600xx0 Russia, 006, Penza region, Penza, st. Ryabova, d.6 Phone: ()6--, 6--. Email mail:

Ormatek Group of Companies Tel. 8-800-333-37-37 Bed Nuvola- Assembly Instructions Bed dimensions: Width: 400; 600; 800. Length: 900; 000. Before assembly, check the completeness of the fittings and carefully

User manual Toscana series portals for Electrolux EFP/P-2520/3020 fireplaces Read this manual carefully before installation and operation Contents Safety rules

Furniture company "MIF" Product passport Instructions for assembling and operating furniture Modular system "Vega" Case glass 400x2200x402 (WxHxD) The product is produced in color: Bleached oak Russia, 44004, Moscow

Furniture company "MiF" Product passport Instructions for assembling and operating furniture Set of furniture for the living room "Oscar" Pencil case glass (with backlight) 576x1800x70 (WxHxD) The living room is made in color: Wenge

VV Instructions for assembly and operation Loft bed "VKS-" Overall dimensions: Length: 60 mm Height: 650 mm Depth: 840 mm For the information of the buyer For ease of transportation and protection from damage

Transportation and storage of furniture - during transportation, avoid moisture, shock and shaking. - store indoors at a temperature of +5 +40 C and a humidity of not more than 90% Furniture assembly -

Rules for the operation and maintenance of furniture. LLC "Volgodonsk plant of wood-based panels" Furniture must be stored and operated in closed heated rooms at a temperature not lower than + ºС and relative

Www.glazovmebel.ru RUSSIA OOO Glazov Furniture Factory Udmurt Republic, Glazov st. Sibirskaya, 42 Modular series of cabinet furniture Karina Karina 56 (bedroom) Corner wardrobe Overall dimensions

Scheme of assembly of a furniture product Walls Shkolnik Saransk 2018 Instruction The safety of furniture and its service life depends not only on the quality of materials and workmanship, but also on proper care

Www.glazovmebel.ru RUSSIA OOO Glazov Furniture Factory Udmurt Republic, Glazov st. Sibirskaya, 42 Modular series of cabinet furniture Paola Paola 555 (bedroom) Wardrobe for clothes and linen

Rules for the operation and maintenance of furniture. Furniture must be stored and operated in dry and warm rooms with heating and ventilation, at a temperature of +5 0 to +40 0 C with relative humidity

Computer table SK-6 Assembly scheme Table assembly order: 1. To the sidewalls (2,3,4): - fasten the guides (18) with self-tapping screws (16a) (Fig.1 and Fig.4); - nail the thrust bearings (20) with nails (19); 2. In the countertop

Rules for storing, operating and caring for furniture Furniture should be stored and operated indoors at a temperature not lower than +2 C and a relative humidity of 45-70%. Furniture must be protected

Furniture company "MIF" Product passport Instructions for assembling and operating furniture Bedroom set "Kim" TV stand 1600x543x420 (WxHxD) Body color: "Wenge Oak"" Facade color: "White Glossy" Russia,

Www.glazovmebel.ru RUSSIA OOO Glazov Furniture Factory Udmurt Republic, Glazov st. Sibirskaya, 42 Modular series of cabinet furniture Paola Paola 56 (bedroom) Corner wardrobe Overall dimensions in

Product passport Children's room set 95736.00.000 "Alisa" Pencil case 552 95736.03.000 Producer: LLC "Yana", Russia, 344009, Rostov-on-Don, Sholokhov Ave., 304, www.yanamebel.ru, e -mail: [email protected]

Dairy transforming dining table for guests

For a small apartment, furniture such as a transforming table is indispensable. It can be easily transformed from a compact coffee table into a full-fledged dining table for several people.

The coffee table easily turns into a full-fledged table for receiving guests.

Read our instructions and make sure that the assembly of the transformer table is very simple.

Dining and coffee options for a transforming table with dimensions

What is necessary

Necessary tools for furniture assembly

To successfully assemble the transformer, you will need:

• Phillips screwdriver or screwdriver with nozzles;
• hammer for furniture;
• fasteners and accessories included in the delivery.

Detail of the table frame and its legs

Box with accessories and fasteners

Despite the many offers on the furniture market for most manufacturers, the process consists of the following steps:

Case assembly

Assembling the corner legs of our table

All legs for the table-transformer assembly

The corner legs of the two halves are connected with screws or eccentrics. In the same way, a body is assembled from long and short tsars.

Case Assembly Diagram

Detailed body assembly process

We fasten the legs to the body according to the instructions

IMPORTANT! Special holes are made on the legs and sides for the simultaneous installation of the lift and the screed of the entire structure. Check after assembly if they match.

Assembled base with legs

Nail the plastic pegs to the bottom ends of the legs. Install shock absorbers on the upper ends of the drawers to soften the impact of the tabletop when it is folded.

We nail the heel pads to the legs

Installation of the lifting mechanism

Installation diagram of the lifting mechanism

Bring the lift into working position. For this:

• hook the spring with one end to the hole inside the lift;
• insert into the groove located on the opposite side the pin, threaded into the second end of the spring;

  Spring in working order, fixed to the mechanism

• screw the lifters to the long and then to the short sides.

Fixed springs for the operation of the transformer table mechanism

Mechanism in a quiet, unfolded state

IMPORTANT! The legs of holders designed for folding tabletops are higher than those made for underframes.

Mechanism for bringing the table to the upper position

Mounting the tabletop and underframe

We mount the smaller part of the countertop

Installing the base for a large part of the countertop

Screw the bottom flap of the book top and underframe onto the support platforms. On the outside of the underframe, install shock absorbers to absorb shock when the tabletop is unfolded. Fold the lifter legs into the box in an outward-inward motion. It will be closed by the bottom of the countertop.

We fix the upper movable part of the tabletop

Install the second half from above so that the end holes for hidden hinges are on one side, and their center-to-center distance is minimal (about 14 mm). Carefully insert the hinges and secure with screws.

Hidden hinges to fix the table in the assembled state

The table you have assembled will last a long time. Do not forget to tighten its fasteners once a year, clean the surface with a dry soft cloth or a special furniture polish.

Coffee option or folded table

The process of transforming a table from a coffee table into a table for receiving guests

Dining option or table in the unfolded form

Video: Table transformer. Assembly

In the store "Mnogo Mebeli" a transforming table is usually sold assembled. In order not to spend money on the work of the master, you can assemble it yourself. As expected, instructions for assembling the table come with each model, but sometimes it can be difficult to figure it out without outside help. Therefore, it is better to use photos and videos that describe in detail each stage of the work.

How to get started?

Table assembly scheme

A transforming table from "A Lot of Furniture" should be assembled in stages, starting with the legs. The drawings show in detail how the parts are twisted. It is worth noting that the assembly must necessarily take place according to technology, otherwise the furniture will not be able to serve you for a due period. In general, the tables are assembled according to the following plan:

1. Legs.
2. Table top lifting mechanism.
3. Table frame.
4. Additional shelves and drawers (if any).

Knowing how to assemble a transforming table from "A Lot of Furniture" using a video, you will cope with this task in a few hours. To simplify the process, you can use a screwdriver and a ruler with a pencil to make marks. It may not be very convenient to do this alone, the help of a friend will not be superfluous, at least in order to hold some elements of the table.

Assembly features

Be sure to firmly tighten all bolts in the mechanisms. Since the table will be laid out all the time, you need to take care of its strength in advance. Assembling a transformer table from Lots of Furniture will not take much time if you follow the instructions.

Carefully study the assembly diagram and do everything as indicated in it. Even small deviations will change the quality of operation of the table.

Remember that there are different types of original transformer tables. When buying a specific model and assembling it with the help of a video, make sure that the item you need is presented there. In general, most of them are similar, but even some decoration elements can spoil its appearance. The most popular models today are:

• Dolphin;
• Caesar;
• Levmar;
• Demi.

When assembling a transformer table, the question often arises: how can the mechanisms withstand such heavy tabletops? This is not unusual, because their strength is in no way inferior to sofa options. They can withstand a lot of weight, and their service life, set by the manufacturer, will surprise any buyer. Steel fasteners do not diverge even after many years of daily use, the main thing is to secure them firmly.

Self-assembly requires sufficient physical strength. A weak woman is unlikely to be able to tighten the bolts and nuts well enough, so men should do this business. Tables from Mnogo Mebelya were and remain one of the highest quality and most reliable, and that is why they are so popular. Having collected the model you like, you will understand that you were not mistaken with your choice.

If we talk about various modifications of the tables, then the transformer has a rather rich history. Even in Soviet times, the book table was well known. It is still successfully produced by many furniture factories in the country. And according to user reviews, in many cases, it is an indispensable piece of furniture. Let's see what the subcategory of transformers actually is.

Why, as mentioned above, does the book belong to the group of transformers, and what other tables belong to this group? Any type of tables that can change their geometry with a slight movement of the hand can be attributed to the group of transformers. For a better understanding, it is worth noting that a standard living table of the same Soviet times, which also moves apart with the addition of a part of the tabletop, cannot be called a transformer, since it does not have a disclosure mechanism.

Most often, such models are used in small apartments or rooms, the area of ​​\u200b\u200bwhich is limited. Such a table can be folded to a minimum size and does not take up extra space, and if necessary, turn around to the desired size.

Where are these products most commonly used? According to the reviews of transformer users, most often these are living rooms, a little less often, dining rooms. A very popular transformer today is the magazine version.

For the manufacture of this group, furniture chipboard is most often used. Transparent materials are used much less often, as it is necessary to hide the transformer deployment mechanism.

Important to remember! That the type of furniture that is subjected to constant mechanical stress requires better materials, otherwise, over time, the connections of the nodes will loosen and the table will fail.

Assembly of this kind of furniture requires standard tools provided by the manufacturer. If the furniture is made independently, then you will additionally need a screwdriver with various nozzles, a confirmed drill, a hammer, screwdrivers and pliers.

How to properly assemble the body of the transforming table

The assembly of the table begins with a thorough study of the manufacturer's drawings or your own if it is made by yourself. First of all, you need to understand the order in which the nodes are assembled. The body is assembled first.

All parts are held together by confirmed connections. It is important to ensure that right angles are maintained when assembling parts. It is also important to remember such details as heel pads, which prevent the legs from scratching the floor, and shock absorbers, which reduce the beating of the table top against the edge of the cabinet when unfolding furniture.

Rules for installing a lifting mechanism

The lifting mechanism is installed before the countertop is attached to the space specially prepared for it. Moreover, when assembling the factory table, the holes for the mechanism are made in advance. When making it yourself, you will have to drill in place. The springs in such a mechanism are attached after the rest of the mechanism has already been fixed.

Countertop installation

Installing the tabletop, on the one hand, is the simplest operation when assembling the table. But, on the other hand, if it is installed incorrectly, the geometry of the transformer will be disturbed and gaps will appear that will spoil its appearance.

How to put up a stand

After assembling the tabletop, you can proceed to the assembly of the underframe. According to the name, these nodes are hidden under the tabletop in the assembled state of the table. Therefore, it will be convenient to assemble the underframe in the unfolded state of the product. In this case, it is necessary to assemble all its nodes separately, and then attach them to the body.

After the assembly is completed, it is important to conduct a final check of its performance, so as not to be embarrassed when demonstrating furniture. All mechanisms should work without much tension and quite gently.

When assembling, it is important to remember safety precautions. Especially when working with sharp drills, as well as when checking the opening and closing mechanism. Since hands can easily get into the space of the mechanism itself.

If you purchased a transformer, carefully read the instructions for assembling it. There is nothing complicated in it. And you will definitely get an attractive piece of furniture.

In many apartments, the living area is not too large, so the tenants have to select furniture in such a way that the arrangement is cozy, but at the same time compact. In such cases, folding furniture comes to the rescue, which helps to save space, and at the same time not deprive residents of the necessary household items. The transforming table is a representative of such furniture.

Transforming tables are used in kitchens, living rooms, bedrooms. This item is done in completely different ways, depending on what functions will be assigned to it. Such tables are also called folding. Classify tables
according to their functions:

• journal-lunch;
• coffee tables (as a workplace);
• tables as storage systems.

The first option is the most relevant. As a rule, such tables are bought by a young family shortly after the wedding, and the number of guests gathering at this table only grows over the years, but the area of ​​​​the apartment does not. Such a magazine-lunch option on ordinary days serves as a stand and does not take up much space, and on weekends or on holidays it turns into a real dining table. It does not take too much effort to seat 5-7 people. In addition, such a table is the most ergonomic for a studio apartment, where the entire living space is combined.

To create a coffee table as a workplace, use others
tabletop types. For these purposes, it is not at all necessary that it be completely disassembled or change its shape. This version of the table can be quickly and easily turned into a desk and adjusted to the desired height. As an addition, the table is equipped with drawers for more convenient storage of stationery. The table can be given several positions due to the type of fasteners used in each case. Where smooth adjustment mechanisms are used, operation is much easier. With such an item, you can create a workplace even in an apartment where there is a lot of furniture and there is no room for a large desktop.

Tables that are used as a storage system are a fairly simple design. They consist of drawers and countertops. Such a table unfolds by unwinding it around its axis.

Table types

Such furniture is usually divided into subtypes, which depend on the mechanism of its unfolding:

Assembly principle

Quite a few people, after seeing the cost of such tables in the store, decide to assemble such an item with their own hands. In a store, such a folding coffee table will cost about 12-15 thousand rubles. If you take up the assembly with your own hands, then you can invest in 6-8 thousand.

You can assemble a coffee folding table in a few steps:

1. Choose a folding mechanism.
2. Create a project.
3. Decide on the material from which the table will be made and cut out the details from it, according to the dimensions specified in the project.
4. Rough assembly of parts.
5. Frame installation.
6. Installation of support parts.
7. Table top installation.

To get a quality result, it is better to create a project in a special
computer program. It will help not only to create a layout of the future piece of furniture, but also correctly calculate the amount of material required.

Component parts can be purchased at the same store where you will purchase chipboard panels (including sawing them). Finished parts are initially connected with bolts, and after that the transformation mechanisms are mounted. Before drilling holes for the bolts, you need to make a markup with a pencil.

If you choose the right material and mechanism for layout, the table will not differ from the store version. Such furniture is perfect for a small apartment in which there is a child and a lot of furniture. When assembled, the table will not take up much space, which will save space for children's games, and in the case when you need to seat guests, it will become the best assistant.

Also, assembly techniques can be viewed additionally on the Internet in training videos.

In the store "Mnogo Mebeli" a transforming table is usually sold assembled. In order not to spend money on the work of the master, you can assemble it yourself. As expected, instructions for assembling the table come with each model, but sometimes it can be difficult to figure it out without outside help. Therefore, it is better to use photos and videos that describe in detail each stage of the work.

Table assembled Disassembled

Table assembly scheme

A transforming table from "A Lot of Furniture" should be assembled in stages, starting with the legs. The drawings show in detail how the parts are twisted. It is worth noting that the assembly must necessarily take place according to technology, otherwise the furniture will not be able to serve you for a due period. In general, the tables are assembled according to the following plan:

1. Legs.
2. Table top lifting mechanism.
3. Table frame.
4. Additional shelves and drawers (if any).

Knowing how to assemble a transforming table from "A Lot of Furniture" using a video, you will cope with this task in a few hours. To simplify the process, you can use a screwdriver and a ruler with a pencil to make marks. It may not be very convenient to do this alone, the help of a friend will not be superfluous, at least in order to hold some elements of the table.

Assembly features

Be sure to firmly tighten all bolts in the mechanisms. Since the table will be laid out all the time, you need to take care of its strength in advance. Assembling a transformer table from Lots of Furniture will not take much time if you follow the instructions.

Carefully study the assembly diagram and do everything as indicated in it. Even small deviations will change the quality of operation of the table.

Assembling the table legs Assembled base Screwing the legs to the body Fixed spring in the table
Transformation mechanism in non-working state Mounting the smaller part of the tabletop Fixing the upper movable part Hiding the loop for fixing

Remember that there are different types of original transformer tables. When buying a specific model and assembling it with the help of a video, make sure that the item you need is presented there. In general, most of them are similar, but even some decoration elements can spoil its appearance. The most popular models today are:

• Dolphin;
• Caesar;
• Levmar;
• Demi.

When assembling a transformer table, the question often arises: how can the mechanisms withstand such heavy tabletops? This is not unusual, because their strength is in no way inferior to sofa options. They can withstand a lot of weight, and their service life, set by the manufacturer, will surprise any buyer. Steel fasteners do not diverge even after many years of daily use, the main thing is to secure them firmly.

Self-assembly requires sufficient physical strength. A weak woman is unlikely to be able to tighten the bolts and nuts well enough, so men should do this business. Tables from Mnogo Mebelya were and remain one of the highest quality and most reliable, and that is why they are so popular. Having collected the model you like, you will understand that you were not mistaken with your choice.