How to choose the right computer desk? Ergonomic kitchen: cooking in a comfortable and safe environment.

Computer desk not only hides massive computer parts (processor, subwoofer, etc.) and numerous wires, but at the same time provides enough space for disks, books and other small things.

There are enough desks for a computer in the store roads. Independent making a table will save a lot monetary funds and will not take much time.

Types of computer tables

Options designs a lot of tables for the computer. straight and angled, compact tables and entire ensembles, including, in addition to the computer desk itself, all kinds of lockers, nightstands, shelves.

There are several types special tables, destined to install on them. laptop, ultrabook, netbook.

Very relevant for small apartments Options for transforming computer tables too varied: table-cabinet, table-cabinet.

Yes, narrow closet does not take up much space, and, if necessary, turns into full-fledged computer desk, and all constituents computers are in place, and you do not have to clean them every time.

Computer desk- pedestal

wall computer tables for laptop(netbook, ultrabook)

Mobile computer tables for laptop(netbook, ultrabook)

What can you make a table for a computer

Great option - computer from wood. You can also use other traditional furniture to create materials:

• laminated sheets
• MDF;
• plastic;
• metal;
• glass.

Note! Metal computer table with glass top- this is the best solution for a high-tech interior.

Calculation of the size of a computer desk

Difficulty in sizing corner computer desk, so first consider just this option.

Corner table dimensions

Factors that affect the size of the table:

• Tabletop width. The minimum width of the worktop is 50 cm (500 mm). Optimal size- 60 cm (600 mm).
• Section width(which are the table supports). For every table different width sections. If it is a processor tray, 20–25 cm (200–250 mm). If the tray is drawers or door - 45–60 cm (450–600 mm).
• corner depth(where the person is located). Minimum size- 50 cm (500 mm), optimal - 60 cm (600 mm).

General table dimensions are calculated based on the above sizes.
Side overlaps - 5 cm (50 mm).

Minimum table size

• table top width 50 cm;
• corner depth - 50 cm;
• section width - 20 cm and 45 cm;
• 5 cm + 20 cm + 35.4 cm + 50 cm = 110.4 cm - length of one wing table;
• 5 cm + 45 cm + 35.4 cm + 50 cm = 135.4 cm - the length of the second wing.

Optimal table size

• table top width 60 cm;
• corner depth - 60 cm;
• section width - 25 cm and 50 cm;
• 5 cm + 25 cm + 42.4 cm + 60 cm = 132.4 cm - length of one wing table;
• 5 cm + 50 cm + 42.4 cm + 60 cm = 157.4 cm is the length of the second wing.

Straight table dimensions

Dimensions direct computer desk calculated similarly. To do this, you need to know the width tray(or trays), working width places(50–60 cm) and overlaps(5 cm on each side).

Minimum table size

• with one tray:
  5 cm + 5 cm + 20 cm + 50 cm = 80 cm;
• with two trays:
  5 cm + 5 cm + 20 cm + 45 cm + 50 cm = 125 cm.

Optimal table size

• with one tray: 5 cm + 5 cm + 25 cm + 60 cm = 95 cm;
• with two trays: 5 cm + 5 cm + 25 cm + 50 cm + 60 cm = 145 cm.

Height table varies from 70 to 76 cm.

Note! It is not recommended to make a table above or below the prescribed dimensions, as this will lead to an incorrect body position when working at a computer, the development and exacerbation of diseases of the back and spine.

Drawing of a computer desk with dimensions

Materials and tools

On one's own do computer desk is not difficult. To do this, stock up materials and tools that will be needed in the manufacturing process and assemblies.

In addition to the base material (chipboard, MDF) you will need:

• glue PVA;
• pair guides for a sliding shelf (length - 30 cm);
• self-tapping screws or confirmations(furniture screws);
• dowels for furniture - 4 or 6 pcs.

You will also need the following to work. instruments:

• the pencils square;
• jigsaw;
• drill;
• screwdriver;
• hexagon;
• roulette;
• sandpaper;
• drill for confirmation.

Important! When cutting table parts from laminated chipboard with extreme caution, rounded parts should be cut with an electric jigsaw so that there are no chips.

Straight computer desk

Consider the manufacture of simple models.

Step 1. Cutting and processing wooden details for the future table:

• side racks 735 x 465 mm - 2 pcs.;
• central rack 735 x 380 mm - 1 pc.;
• back wall 1090 x 290 mm - 1 pc.;
• countertop 1200 x 580 mm - 1 pc.;
• internal shelves 450 x 250 mm - 2 pcs.;
• retractable shelf 830 x 380 mm - 1 pc.

Step 2 in the side and central on the rack we make holes for confirmations: 4 for each shelf. We strengthen bottom shelf.

Step 3 Fasten in the same way top shelf.

Step 4 We fasten back wall.

Step 5 We fasten the second sidewall with the help of two confirmations. From the front it will look like this:

Step 6 Marking a place for guides and proceed to fix them. When choosing or making sliding shelves, you should remember about thickness guides (1 cm on each side).

Step 7 Fasten guides to shelf.

Step 8 Drilling small holes in lateral racks (under the dowels of the tabletop). Similar holes drilled into the table top. You do not need to drill through the countertop, but the depth should be not less than 25 mm.

Step 9 Lubricated dowels glue PVA, insert them into the ends frame table.

Step 10 We put the tabletop on top and insert the dowels into grooves.

On the surface of the table, also on dowels, you can install shelves with drawers for small things, notebooks and disks.

Corner computer desk

Corner tables for the computer also come with superstructures and without add-ons.
Length wings:

• minimum - 110/135 cm;
• optimal - 132/157 cm;
• maximum - 166/200 cm.

Step 1. Draw and cut everything details future table. If for the manufacture of the table are used not laminated materials, antiseptic.

Step 2 Cut out countertop. We collect side racks with shelves (confirmations). Right section (which larger size) can be with retractable drawers or with one door.

If a section is made with boxes, then on internal side of the side walls are pre-attached guides. Boxes are collected, which are also fasten guides.

Step 3 With the help of confirmations, he gathers angular table support.

Step 4 Attached to it is a rectangular frame with guides and a retractable shelf for keyboards.

Step 5 in the tabletop, lateral racks and corner support holes are made under dowels(2 pcs on each side and 1 pc on each side of the corner of the corner support).

Step 6 Dowels pre-lubricated PVA, are inserted into the side posts and corner support.

Step 7 Installed countertop.

The sections at the back are closed with walls made of Fiberboard. We cover the finished table varnish or paint.

Computer table decoration

If in the manufacture of the table are used laminated wood sheets, then any special finishes not required. Process only visible ends details.

For this, a special edge ribbon. It is made from different materials and there are different colors.

The edge gives the product a finished and aesthetic appearance, and also prevents the release of harmful to humans from chipboard formaldehyde. On the ends of the parts, the tape is glued with iron.

How to make a computer desk with your own hands, see video:

Properly selected furniture provides users with comfort and health benefits. If we are talking about tables, then take when choosing correct solution, can be guided by their purpose and accepted standards.

What are the desk height standards?

The recommended value is 75 cm. Focusing on GOST, manufacturers produce furniture with a height of 70 to 80 cm. Theoretically, such a run would have to satisfy the requirements of all users, but this is not so. Those whom nature has endowed with a height of 160 or 180 cm, for standard table feel uncomfortable because it is either too high or, conversely, too low.

A separate category that does not fit the standards - children. Dining, writing or computer - they need a table before their physical development is completed. Consequently, parents have only 2 options - to adjust the length of the legs of the chair, or, which is preferable, to attend to the purchase of children's furniture.

How to choose the right table height

The basis for calculating the standard is the average height of a person. When choosing furniture “for yourself”, it is also important to take this parameter into account, because the formula for a comfortable countertop height is unchanged: height (cm) * coefficient. But the variable itself depends on the destination.

Kitchen

This type of tables means all working surface, which is not entirely correct, but the most practical. After all, it would be much more difficult to take care of a truly correct and convenient multi-level option.

The finished dish is the result of many preparatory processes, most of which are easier to do standing up. Accordingly, the height of the kitchen table should be such that the person behind it can work with relaxed shoulders and a straight back. Selecting from ready-made kitchen surfaces, optimal distance from the tabletop to the floor it is easy to determine visually: it should be at a level below the waist.

But what to do if members of the same family have a big difference in height? In no case do not determine the arithmetic mean, as recommended by some "experts".

ATTENTION! When choosing a kitchen table, you should focus on the one who cooks more often - it is this person who “brightestly” feels the consequences of the wrong choice.

If you need to determine the height of the kitchen table if it is made to order, you can use the formula: height * 0.51. Rounding the result to the nearest integer, it will be possible to obtain the optimal distance from the floor to the countertop, taking into account individual characteristics.

Written

This version of furniture has slightly different tasks: it is supposed to work behind it while sitting. The forearms should remain relaxed during work, the back should be straight, and the shoulders should be in a natural position. Let's allow a slight tilt of the head, but the lower leg and thigh must be at a right angle, and the foot must be firmly pressed to the floor.

ATTENTION! When choosing such furniture, there can be no question of any averaging. It is worth focusing on the tallest household. And the rest of the set to the table simply buys individual chairs and footrests.

The formula for calculating the optimal height of the desk: height * 0.46.

Computer

It is important to understand that this is the direct successor of the written counterpart. The requirements are the same.

ATTENTION! When typing on the keyboard, it is important to keep correct posture and hand position. And the distance from the eyes to the monitor is easy to adjust by moving it to the opposite edge of the table top.

For greater compactness while maintaining convenience for users, computer tables are often equipped with a retractable shelf for the keyboard and a monitor stand. In this case:

• the shelf should be at the optimum height to maintain the natural position of the hands;
• a chair with comfortable armrests is selected for the table, which will serve as an additional point of support for the forearms;
• The stand should provide an optimal viewing angle without having to slouch or lean back.

The general recommendation for choosing the height that is optimal for all family members remains: a guideline for the tallest. Fortunately, it is not difficult to purchase a footrest, and high-quality computer chair easy to adjust to the needs of users.

lunchtime

Not too much time is spent behind such furniture, but this does not mean at all that any option will do. At the dinner table, the family gathers in full force, so everyone should be comfortable at the same time. too high or low table will not allow you to sit comfortably and get the maximum pleasure from culinary masterpieces. And all kinds of footrests and chairs with adjustable height are simply inappropriate. But that doesn't mean that right choice too hard to do.

ATTENTION! The calculated value is determined by the formula: height * 0.43. True, there is one clarification: in this case, it is worth focusing on the average growth of adult family members.

If dad, mom, grandparents "grew" to 175, 155, 180 and 160 cm, respectively, then you need to determine the average value:
(175+155+180+160)/4 = 167.5 cm.
And already it is substituted into the formula. And it does not matter that the father has to stretch his legs slightly in order to comfortably sit at the table - this is permissible near the dining room.

How to choose the right desk for your child

It is desirable that the working surface of the furniture for the student be tilted, and there are several reasons for this:

• the overview is improved, which makes it easier to read;
• accustoms to order, because the little things scattered on the table tend to roll down if they are not placed in the places allotted for them;
• stimulates to occupy the only correct position, since it is inconvenient to slouch at such a table.

REFERENCE! The height of the near edge is calculated using the same formula as for the "adult" version: height * 0.46. But the child is growing rapidly, so it is worth buying furniture with a small margin "for growth" or, preferably, with the ability to adjust the height and angle of the table top.

The latter option is somewhat more expensive than unregulated ones. But it will cost less than 2-3 simple ones - and this is the minimum number of replacements for a children's desktop, if you care about maintaining the posture of the younger generation.

Are other parameters important?

Properly selected height will not make it convenient to work behind a narrow desk. Conversely, a wide canvas with an unsuccessful height can be quite comfortable. Therefore, when choosing, it is important to pay attention to the following parameters:

• the width of the tabletop is at least 60 cm for a child and 80 for adults (more is better);
• depth - from 35 cm for a child, from 50 for an adult (the principle is the same);
• legroom - to the depth of the tabletop and at least 50 cm wide.

Applied to various types furniture looks like this:

• for the kitchen table, depth and width criteria are taken;
• for written and computer - all three parameters;
• for dinner, the first pair of values ​​is doubled, resulting in the required minimum.

Benefits of an adjustable table

The main advantage of such furniture is the ability to adapt to current needs, eliminating the need to purchase several oversized models. Adjustable Options are compact, which is especially useful in urban apartments. The only negative is that they are not designed for serious loads. Their limit is 45–50 kg.

REFERENCE! The table can be equipped with a mechanical or electronic transformation mechanism. Often the manufacturer provides not only a change in the level of height, but also an increase in area.

Consequences of the wrong choice

The first item in the lists of criteria is convenience. If the table does not meet this requirement, then there can be no question of full-fledged work behind it. Incorrect posture primarily interferes with normal blood circulation. Result: congestion, swelling, pain. And for a child whose body changes every minute, the wrong position at the desk contributes to an increased risk of abnormal development of the muscular corset.

According to accepted standards, an area of ​​​​2 square meters is allocated for one workplace. meters (not counting the passage area, the width of which is at least 0.6 m). Is it a lot or a little? Not much, given that total area office space per employee should be at least five meters. Besides, most usable space takes office table– the size of its countertop cannot be less than one square meter. So there is nowhere to turn around.

The task of a properly organized workplace is to squeeze the maximum benefit out of this small patch. For this purpose, special norms and recommendations have been developed, the implementation of which will positively affect both the efficiency of office work and the physical and psychological state of employees. In particular, the height of the table with the computer installed on it should be an average of 72 and a half centimeters (options from 68 to 80 cm are allowed). The computer monitor is approximately at a distance outstretched hand from the eyes of an employee, if taken in numbers, this is at least half a meter, and for large diagonals (20-22 inches) - 70-75 cm. It is important at what height the monitor is located: optimal solution considered when upper edge is on the same level as the eyes. If you put the screen higher, it will increase the load on the eyes, if it is lower, the neck will quickly tire.

CORRECTLY SIT

You should also think about the legs - there should be enough space under the table so that the bottom cover of the table does not put pressure on your knees and you can stretch your legs all the way to the wall. It is good if the table has a special footrest that promotes blood circulation. Special requirements for a keyboard and mouse shelf: for the correct position of the wrists, it is better to place it at the height of the abdomen, and the shelf must be wide enough (from 80 cm or more) so that the computer user can move it to the right or left, as it is more convenient for him, and do not twist the spine, leaning to the side. So that the edges of the shelf do not stick into the hands, its edges are made smooth and rounded.

All these requirements impose certain restrictions on the width and depth of the table - it should not be too narrow to provide a comfortable posture for the worker and give enough space for comfortable work. On the other hand, in the principle “everything is at hand” always applies: when all the things necessary for work are within the reach of a seated employee, that is, at a distance of about 30-40 cm. , without getting up, it is convenient to reach any part of the table.

CORRECTLY ORGANIZE

Possible add-ons, trays, coasters and other accessories that create a multi-level storage area allow you to properly distribute items on the table. Side hanging shelves for cabinets are very useful: this gives additional free space, because there is no need to clutter up tables beyond measure either. Curbstones and cabinets where documents are stored should also be kept no further than arm's length.

One of the eternal curses of the office - countless wires, annoyingly tangled underfoot or falling under the arm, downright living embodiment of chaos and disorder. "Down with wires!" - this should be the slogan of modern office space. The means for this have long been available, but they are far from being always used. At a minimum, cables follow from the floor, where they are trampled on with shoes and beaten with chairs: it is better to run them along the wall, enclosing them in ventilated boxes (covers). In addition, there are many models with holes for wires, which are closed with plugs. Moreover, wires can go to the table top through cable channels inside metal legs so you won't see them at all.

The convenience of the workplace can be increased by the light of additional "chips" that help to better organize the storage of documents and all sorts of little things that accompany office work. For example, special trays for stationery can be inserted into a table or cabinet. Then your paper clips, erasers and pens will not lie in a common pile, in which it is difficult to find anything, but will turn into neatly sorted cells, where every thing is in plain sight. Sometimes such trays are already built into the furniture being sold, but it is not a problem to buy them separately.

The same can be done for papers: cabinets and cabinets with drawers are equipped with a storage system for hanging folders. Proper systematization and rational placement of files provide quick access to any document.

standard height the kitchen table is 0.8 m, the working surfaces are 0.9 m. However, this height is calculated for a person with a height of 1.65 m, if you have a different height, then you can calculate the necessary parameters yourself using the formula given in the article.

Among the list of criteria affecting rational choice kitchen table, its height becomes one of the dominant indicators. A comfortable fit depends on it, if it is, as well as comfortable activity, if we are talking about working kitchen tables.

Standards for kitchen tables

Regulatory documents regulate the dimensions furniture items. The main one is GOST 13025.3-85. In accordance with its provisions, the distance from the floor to the lower plane of the tabletop is set to a minimum of 0.61 m, respectively, to its top, the size of the distances varies from 0.72 to 0.78 meters.

The unit of reference is usually taken as the average height of a person - 1.65 meters. This is what causes the inconvenience that sometimes arises when the table turns out to be low or, on the contrary, extremely high, since everyone's height is different.

Discomfort is expressed in the inconvenience of using cutlery competently and fully if the countertop is too high. If the table is low and it is impossible to take a comfortable position, as you have to bend over, stoop, then by the end of the meal there will be a feeling of fatigue and aching in the spine.

Table Height Formula

There is a simple technique for interpreting the average standard value the height of the countertop (Hst ≈ 0.75m), taking into account average growth (Рср = 1.65 m), under own growth (Р). Ideal Height selected dining table(H) is calculated by the formula:

H \u003d Hst ∙ P / Rav.

For example, having a height of P = 1.8 m, the most comfortable arrangement will be observed at a table with the following estimated height:

H \u003d 0.75 ∙ 1.8 / 1.65 ≈ 0.82 m.

Of course, such a calculation is rationally suitable for one person, but more often several households gather at a meal. In such a situation, it is advisable to take the arithmetic mean of the growth of adult family members as a basis, and for the younger generation, you can purchase special chairs that make it easy to adjust their height.

Optimum desktop height

It is important to know and take into account the optimal height of desktops, where the hostess spends a lot of time. Ideally, compliance should be observed, and standard kitchen in each functional zone, which has a specific purpose, is focused on the normative range of heights (m):

• washing dishes - 0.85 ÷ 0.95;
• cutting raw species products - 0.82 ÷ 0.85;
• cooking - 0.8 ÷ 0.85;
• kneading, rolling dough - 0.7 ÷ 0.82;
• working space for installation kitchen appliances, pots with ready meals and other needs - 0.85 ÷ 0.87.

If we take for example a cutting surface, which, with average growth rates (1.65 m), should rise above the floor by a maximum of 0.82 m, then for more tall man this indicator should be increased. Can be compiled indicative list optimal desktop height.

• A height of 1.7 m will require a cutting plane height of 0.85 m.
• At 1.75 m, a worktop level with a mark of 0.87 m is appropriate.
• If the growth reaches 1.8 m, then it is more convenient to work on a surface that is 0.9 m from the floor level.

Knowing these patterns is of great help if you plan to independent production kitchen furniture.

In furniture collections, usually a standard height kitchen tables is 0.85 m. this does not always suit women, and especially men who have a rather impressive height. Manufacturers have taken into account the relevance of such a problem and now you can purchase a table model for the kitchen, which allows you to adjust vertical level her installation.

Chair height

To optimal height countertops, selected in exact accordance with height, turned out to be really comfortable, it is necessary to correctly select chairs. Based on the calculated values ​​\u200b\u200busing the above formula, it should be subtracted from the result obtained 0.45 m for high (> 1.7 m) growth, respectively 0.42 m, if the growth is average (≈ 1.65 m) and 0.4 for low person (< 1,6 м).

Therefore, having a height reading of 1.8 m, having picked up a table, according to the previously calculated results with a height of 0.82 m, it is advisable to put a chair for yourself with a height of 0.82 - 0.45 \u003d 0.37 m. These calculations are especially convenient if it is accepted solutions all chairs to buy from the range with adjustable legs. In such a situation, not only household members are satisfied in a comfortable seat at the table, but it is also possible to create an excellent environment for guests, regardless of height.

Computer tables today are indispensable attributes of every home. Such interior items have won such widespread and enviable popularity due to the fact that life modern man is inextricably linked with computer technology, which requires a separate place.

However, the choice of high-quality computer tables largely depends not only on their configuration and design, but also on their size.

Peculiarities

Nowadays, a computer desk is indispensable. These pieces of furniture are special in that they can be used in a variety of settings. It could be like city ​​apartment or private house, as well as a small or large office, as well as a government or entertainment institution. Thanks to multitasking, such furniture can be safely called universal.

Moreover, such designs are often located both in adult and children's bedrooms, because today even the youngest users effortlessly master the corresponding technique. A well-chosen computer desk is perfect for both work and play and relaxation. These interior items are multifunctional, as they can be used not only for working on a laptop or desktop PC.

Often, models with large and roomy countertops are divided into two halves. One of them is assigned directly to the computer, and the second becomes a writing area. As a rule, such tables have impressive dimensions, but they are very convenient to use.

Such a common and sought-after furniture finds its place in almost any room of the home. This can be not only a serious study or a student's bedroom, but also a living room, a library and even a kitchen (if we are talking about a studio apartment).

Working and studying at such a table should be as convenient as possible, so modern furniture factories They produce many options with a very different structure, as well as various indicators of length, height and width.

These parameters play one of critical roles in choise suitable model computer desk.

The fact is that, working on a design of inappropriate sizes, the user will be very uncomfortable and uncomfortable. Moreover, the constant operation of such tables can cause significant harm to human health. So, working on a model that is too low, you will have to constantly bend over and move your body forward, which over time can lead to a serious curvature of the spine and stoop, not to mention the aching pain that can become your constant companions.

No less seriously you need to approach the dimensions of the computer desk that you plan to buy for a child. Here it is very important to pay attention not only to the width and length of the countertop, but also to the height of the structure as a whole. If you do not want to harm the growing body, then the computer desk for it must be selected correctly.

Of course, the choice of furniture of one size or another largely depends on how many items you plan to place on it. If there are not so many of them, then it is quite possible to get by with a compact model with a small tabletop.

If you are looking for a more roomy and spacious option, then its dimensions should be appropriate.

How to calculate all sizes?

If you want to know correct parameters computer desk, then you should refer to a simple mathematical formula, which today many buyers use in choosing furniture:

• To independently calculate the height of a computer desk, you need to perform the following actions: height (in centimeters) x 75 cm (standard height of PC tables) / 175 cm = structure height

• The width of the computer desk should not be unnecessarily miniature. It is recommended to add another 30-40 cm to the specific parameter of a particular tabletop. Thus, you will provide extra space for bedside tables;
• Minimum correct depth computer model without add-ons is 45 cm. Of course, if there are other additional components in the design, then this indicator can be more, for example, 60 cm. The optimal depth of such furniture primarily depends on its structure and configuration.

Standards and popular dimensions

Standard dimensions tables for PCs and laptops are recommended to be considered, starting from the most compact models. With the exception of the height, the rest of the parameters can be changed without any restrictions.

As for height, it plays one of the most important roles in the design of such furniture. An incorrectly selected option can harm not only the spine, but also the user's eyesight, since the monitor on such a model will be at the wrong height. Mainly selection correct option depends on the position in which the person will sit behind him.

Experts say that in the process of working at a computer desk, the body should remain in this position:

• back - straight;
• forearms - in a relaxed state;
• shoulders - not raised and not tense;
• muscles are also relaxed;
• legs should be even and be on a special stand, a shelf under the table top or just on the floor.

The classic table height for computer equipment is 750 mm (75 cm). It is calculated based on the average growth of both sexes. So, the average height of men is 175 cm, and women - 162 cm.

If the user’s height is very small (150 cm) or, conversely, too impressive (190 cm), then in such cases the following solutions will be a real salvation:

• chairs with adjustable height;
• order design according to individual sizes;
• worktop with adjustable function.

However, the design width indicators depend on several important factors:

• the minimum is an indicator of 60-70 cm, and the maximum is 80-95 cm;
• the compartment for the system unit should occupy at least 20-30 cm;
• first take a free place to place the cabinet and add another 30-40, 45 cm to the whole structure;
• products of an angular structure should have a turning space of the tabletop, which is 50-60 cm.

Another important parameter computer desk is its depth. The main dimensions of the entire structure as a whole largely depend on it.

When calculating this detail, the following nuances should be taken into account:

• tables that do not have add-ons, as a rule, have a depth of at least 45 cm;
• structures in which there are additional superstructures have a depth of 60-70 cm;
• corner specimens equipped with shelves most often have a depth exceeding the mark of 85 or 90 cm.

Non-standard solutions

Many consumers are faced with the fact that not a single model of a computer desk from the standard range suits them. In such cases, do not panic and get upset. Fortunately, today many manufacturers offer a custom-made furniture service. So, you can come with your sketch and measurements in order to order the perfect design. optimal dimensions. Of course, such products are most often more expensive than popular display options, but in this case the end justifies the means, because as a result you will get the most convenient and comfortable computer desk.

In addition, multifunctional designs with adjustment are very popular today. They are in enviable demand not only because they can be easily adjusted to a person with any height and configuration, but also because they can be selected even for a compact home and save free space.

Table supports, table tops and monitor stands are adjustable. If you combine similar furniture with comfortable adjustable chairs, as a result you will get a universal tandem for which all family members can work, each time adjusting the functional structures for themselves.

functional models

Modern manufacturers produce a great variety of computer tables with different structure and functional components. Let us consider in more detail the most popular and sought-after options that are found today in many dwellings:

• Direct. These products are among the most popular, as they were the first on the furniture market. Most of these designs have spacious rectangular countertops. They can be placed along the free wall in the room, thereby freeing up free space in the central part. It is recommended to arrange straight tables so that they do not block the passage and do not interfere with free movement in the room, since the presence of sharp corners of such furniture can lead to painful blows;

• Corner. These models are the second most popular. Their main advantage is that they allow you to save space in the room, as they can be placed in a free corner. Moreover, they usually system unit can be moved a little further without cluttering up the workspace. All items on the corner tabletop are always accessible;

• Diagonal. Today, such models are enviably popular, as they look original and are very convenient to use, which is noted by many buyers who fork out for such designs. At these tables, the user can be diagonal, and his face is directed to the corner. Often, miniature mini-tables have a similar structure. Their disadvantage is considered insufficient functionality. Bedside tables, as a rule, are present under the main cover of these models, and sliding elements are completely absent.

Diagonal designs most often have small countertops. The length of the side part in them can be only 60-70 cm, but there are more compact options. These tables are extremely rarely equipped with superstructures. Much more often in them you can find small bedside tables with drawers.

• Diagonally perpendicular. Sitting at such computer tables, the user's face is directed to a corner, but he will always have the opportunity to turn around to the wall or towards the window opening (perpendicularly). These options most often have considerable dimensions, so it is not recommended to buy them for small dwellings. However, it is worth noting that diagonal-perpendicular tables differ in functionality. They often have useful compartments with drawers, roll-out or built-in cabinets, superstructure shelves and other practical details;

• Rack. Today, well-thought-out computer desk designs are very popular, in which there is an additional rack. Most often, such options have considerable dimensions, but they should not frighten and repel the buyer. The fact is that having such furniture in your room, you can save on buying a box or bookshelves, because you will already have a rack combined with a computer desk.

Examples in the interior

Today, each consumer has the opportunity to choose the perfect computer desk that will organically fit into his home. At the same time, it does not matter at all what style the furnishings are made in. It can be both an eternal classic and a shocking avant-garde.

Corner designs of computer tables are very popular today. They often combine several different colors. For example, the main body can be snow-white, and the drawer doors can be dark chocolate. Such a model will look interesting, even if it has compact dimensions.

You can put such a table in a rough light gray loft-style room with a milky gray parquet floor, laconic wall paintings and a dark round carpet on the floor.