Among the many materials presented to date, there are universal ones, i.e. those that have found wide application in various fields human life. One of them is the development of Russian scientists - holofiber. It became widespread in 2005, and since then it has been successfully pushing its analogues out of the market. The popularity of the material is due to its availability, durability and an impressive set of properties.
This synthetic material belongs to the category of non-woven fabrics. The structure consists of spiral hollow fibers that form many air pores (cavities). Due to such porosity, holofiber (translated from English as “hollow, hollow fiber”) is widely used as a heat and soundproofing material in different industries. The holofiber looks like fluff or cotton, but it is better in operation.
Compared to its natural competitors, holofiber does not stray, and during use it does not form textile lumps. The fibers in the canvas are either vertical or random. The material is homogeneous over the entire surface. Thickness and density range from 60 to 4000 g/m2. The material is produced from a polyester compound by means of thermal bonding.
One of the main distinguishing features of the material is a porous, multilayer structure that is capable of retaining dust. The presence of pores different sizes fills the fiber with air, due to which it is used in the organization of a protective sound and heat insulating layer. The fibers have a spring structure, due to which the products easily restore their shape.
Hollofiber is 100% synthetic: polyester or polyester, which is generally the same. Unique properties fibers obtained from it are explained by the technological process of production. The composition does not contain formaldehydes and other common reagents, due to which the polyester fabric is as close as possible in terms of safety and environmental friendliness to natural materials. All the positive technical properties (versatility, durability, strength) of synthetics are preserved.
Often manufacturers and consumers have a question, which is better, synthetic winterizer or holofiber? Compared to padding polyester, raw materials pre-treated for the production of holofiber are passed through a wind tunnel, which forms a layerless canvas. Further, under the influence of temperature, the fibers are soldered - this option is more reliable than gluing. Thanks to this, the final product is strong, elastic and with a whole range of important properties.
As for the synthetic winterizer, this is also polyester synthetics, but it is made by gluing, felting, thermal bonding or needle punching. It is used as a heater for clothes and a filler for household items, for example, blankets, pillows, toys (including those with magnets). Hollofiber in comparison with it is intended for industrial use and is ideal for the construction industry, which cannot be said about synthetic winterizer.
In addition, the synthetic winterizer is heavier, but less dense and durable. It quickly loses its shape and begins to stray, even if carefully quilted. The structure of the padding polyester is less common, so it has a high thermal conductivity - this option is not optimal for thermal insulation. When the name of the filler is indicated in the characteristics of outerwear as silicone, keep in mind that it means a siliconized synthetic winterizer. It is superior in quality to conventional synthetic winterizer insulation, because. Due to the treatment with silicone, it keeps its shape better. True, he can stray into lumps.
Down is more likely not a material, but a natural insulation, which is considered a type of feather cover. It does not have a core, it consists of soft fibers that can repel moisture and retain air. Down is a great insulator, but it can fall off when washed. In addition, it tends to accumulate dust, cause allergies and create a favorable environment for microorganisms. It is used for stuffing pillows, blankets, featherbeds and warming clothes. Down is warmer than polyester fiber, but inferior to it in terms of performance.
As for synthetic down, it is a derivative of polyester, the spiral fibers of which are treated with silicone and connected to each other. It turns out elastic, soft and bulk material, which is similar in characteristics to holofiber. It is used as a heater for outerwear and a filler for upholstered furniture, household items. In terms of strength and density, it is inferior to non-woven polyester fabric, therefore it is not used in industry. It is difficult to unequivocally determine the best option, but holofiber wins due to its versatility.
This material is not afraid of mechanical impact. Thanks to the thermal bonding of the fibers, the canvas keeps its shape and retains its original volume. It withstands intensive washing, if it is acceptable for fabrics combined with insulation - you should not abuse the possibilities. Having decided to purchase it, to solve certain problems, decide on specific type:
One of the main advantages of the material lies in the versatility due to which it has become so common. The smooth surface of the fibers of the canvas does not allow dust particles to accumulate, due to which the material is hypoallergenic. Even for allergy sufferers, the condition will not worsen from contact with a canvas made of polyester raw materials. Learn more about the features and benefits:
Hollofiber is ideal because it does not require any special care. It does not absorb foreign odors and has a high tear resistance coefficient. In the light, the structure of the material is not destroyed. Due to its high wear resistance and elasticity, it is becoming increasingly popular. Due to the low hygroscopicity, the material retains plasticity even at low temperatures. Performance characteristics and properties:
Feature List | |||
Layer height (m) | |||
Air permeability (dm3/m2s) | |||
Ability to retain moisture (1%) | No more than 1 | No more than 1 | No more than 1 |
Thermal resistance of 1 layer at natural convection (m2S/W) | |||
Shrinkage after washing (%) | |||
Resistant to repeated compression (%) | Not less than 71.5 | Not less than 74.6 | Not less than 72.7 |
Possessing a lot of advantages, this polyester fabric has found wide application, for example, in the production of workwear. The material is also optimal for the manufacture of outerwear, including children's. Hypoallergenic, sensitive to the individual microclimate - it is very comfortable in winter time. Suitable non-woven polyester fabric also for organizing landscape design as a hardening base.
Other applications:
In the production of upholstered furniture, the fillers used differ different density. Some have the ability to form, while others do not:
Professional builders appreciated the holofiber, thanks to which it is actively used to fill the space between the walls during the construction of various objects. In this case, it acts as a heat and sound insulating layer. Not only inter-wall fiber insulation is widely used, but also under-roofing, interventional and acoustic options. They are produced in the form of light elastic layers and universal sheets that are extremely easy to cut, even by hand. In addition, this non-woven material is used as a filler in filters.
Widely used non-woven fabric for the manufacture of upper adult and children's clothing. In addition, the material is good as a filler for pillows, blankets, mattresses, covers, etc. Upholstery for furniture, lining for jackets, coats are also made from it. It keeps its shape perfectly, withstanding washing without loss of volume, after which you do not need to think about restoring the shape, which cannot be said about fluff and feathers. An interesting alternative is bamboo cellulose filamentary fibers, but they are inferior to holofiber in strength.
In jackets, this non-woven material is used as a filler due to the fact that it retains heat well, is very light, and easy to care for. Compared to natural counterparts, it is cheaper, but keep in mind that with frequent washing and wrong choice regime in washing machine, the fibers will lose their original shape over time. Winter jackets with such a filler have unique characteristics: high strength, low thermal conductivity, environmental friendliness.
A web of hollow spiral fibers has been used to fill furniture, blankets, mattresses, toys, covers, etc. The fabrics have excellent breathability, which is one of the main requirements for flooring materials and padding in frameless furniture. The fibers are different high rates tensile strength, resistance to repeated bending, and this affects the durability of the final product.
The material is not afraid of mechanical stress and high temperatures (boiling, dry steam treatment), it can withstand intensive washing, but it is important to know the rules for proper care of it. Do not abuse the capabilities of the canvas: when the top is not very dirty, it is better to wash it on a delicate cycle. From the funds you can use ordinary washing powder, and in some cases even bleach will do. General rules:
Dirty polyester jackets are best soaked in soapy water in advance and rub the most soiled areas if necessary. During washing for holofiber, it is undesirable to increase the water temperature to 70 degrees. This indicator should not exceed 40 ° C if the top of the jacket is made of membrane fabric, while choosing a delicate wash cycle. Powder in this case can not be used, in extreme cases, use liquid dishwashing detergent, ordinary shampoo.
If the top of the jacket is made of bologna, then it is better to wash such a product by hand. It is not recommended to wrinkle the jacket strongly and twist it after washing, because. bologna is easily crumpled, and creases remain on its surface. Straighten the washed item without twisting with your hands and hang it on a coat hanger so that all the water drains from it on its own. With proper drying, a jacket or down jacket often does not require ironing, because holofiber is not prone to deformation.
Having decided to buy bedding made from a material such as hypoallergenic holofiber for yourself and your child, read the rules for caring for them. Washing blankets with pillows is a little different from washing jackets or coats: it all depends on the degree of soiling, the type of fabric top, and the volume of products. For example, a large blanket will have to be washed by hand, because the washing machine is small for her - you will need to prepare in the bathroom soap solution.
In tailoring warm clothes, blankets, products for children, Hollofiber-SOFT is widely used. This environmentally friendly product is non-toxic to the body and devoid of harmful impurities, cost:
Width (m) | Thickness (cm) | Density (g/m2) | Price per linear meter in rubles |
Hollofiber: what kind of filler is it, we will give a description with a photo, tell you how to wash it, reviews, properties and features, and also how it differs from synthetic winterizer. Hollofiber is a new generation filler, which is a non-woven material consisting of small hollow, spring-like polyester fibers.
Outwardly, the holofiber is similar to synthetic fluff, but has a more porous structure. It consists of small lumps, located most often randomly or vertically. Each such cavity resembles a small spring, which, after deformation, easily restores its shape.
This insulation is considered one of the best among other synthetic materials. It has high thermal protection. Therefore, choosing a heater, depending on what temperature it is designed for, you can safely choose a holofiber. It easily withstands temperatures up to 25 degrees below zero.
Hollofiber is produced in the form of: layer (plate), balls and canvas. Plates are most often used in construction, balls for filling pillows and blankets, and canvas for warming outerwear. Material composition - 100% polyester (polyester).
The filler has the following properties:
Modern synthetic material is completely unpretentious in care. It easily withstands high temperature regime and high spin speed. You can also wash a holofiber jacket at 90 degrees if it is heavily soiled. But do not abuse such washings much.
Optimum temperature for washing things of average degree of pollution, 30-40 degrees are considered in the delicate wash mode.
More video tips:
Washing your favorite holofiber pillow is not much more difficult than washing a jacket. This should be done in the washing machine on a delicate setting. Choose a temperature not too high - 30-40 degrees. The most common washing powder will do, and you need to fill it in a special compartment in an amount three times smaller than when washing other things.
The synthetic filling for pillows easily restores its shape and does not lose its properties under the action of high temperatures. Thanks to this, pillows from it can be wrung out and dried in the washing machine.
All are covered in a separate section.
Hollofiber has improved characteristics compared to padding polyester: it has better thermal conductivity, less weight, and is unpretentious in care. But in addition to properties, materials can be easily distinguished from each other by touch.
Outwardly, the synthetic winterizer is polyester fibers laid in parallel layers, glued or thermally bonded to each other. If you feel for a heater under the top layer of clothing and try to pull it to the side, then the synthetic winterizer will begin to tear. At the same time, the holofiber consists of small balls arranged randomly in relation to each other. Such insulation will never break when stretched, since the balls are easily separated.
You can find out from a separate article.
Until recently, down was considered the best insulation. It is lightweight, breathable, retains heat and repels water. However, all of its unique performance characteristics significantly reduced after washing. The fluff falls off, in addition, dust accumulates in it, which causes allergies and harmful microorganisms can settle.
Holofiber does not have all these shortcomings, while it is almost as good as fluff in terms of thermal protection and other characteristics. Therefore, we can safely say that it is even better than natural insulation.
Information about that is presented in a separate article.
The main advantage of this synthetic filler is its heat-regulating properties, as well as non-toxicity, hypoallergenicity, tensile strength. This is a reliable insulation, the service life of which, even with numerous washes, is from 7 to 10 years. The disadvantages of the material include the fact that it does not absorb moisture well and costs much more than the same synthetic winterizer.
Add the site to your bookmarks and stay tuned for new and interesting information On him.
Before the next update of the wardrobe, it is worth solving the age-old dilemma - to pay more and buy something of high quality or save money and rely on luck. cheap thing it may not be inferior to its more expensive counterpart, or it may lose its acceptable appearance after a couple of washes. But for winter clothes, the “internal content” is much more important, the same holofiber, what it is and where it is used, is well known to residents of the northern regions.
Unlike many animals, man is absolutely not adapted to life in wild nature. We have created:
Each of us needs warmth, quality food and basic security. Mankind could provide for itself all this only thanks to a high level of intelligence and engineering thinking. If it were not for technological progress, we would still wear skins, live in caves and die in our 30s.
The prospects are not very bright, but today it is not necessary for men to take a spear and go to the mammoth. Women, too, may not sit by the hearth, waiting for starvation or cold death. Everything “rests” on social interactions and a complex hierarchy of relationships.
The world has not become much safer, but at least there is no saber-toothed tiger waiting for you behind the nearest tree, which is not bad.
Clothes from natural materials this is fine, although animal rights activists may argue on this subject. But given the cost of production, even today, not everyone can afford a fur coat or something like that.
The chemical industry comes to the rescue, which has given the world a lot of synthetic fillers for shoes and outerwear, but even here a number of problems arise:
One of the newfangled synthetic fillers for jackets is holofiber:
As it is easy to understand, the filler is not only warm, but also environmentally friendly. This immediately removes a number of questions from those who are serious about their health, clothing with such a heater will not cause any allergies, let alone poisoning. the only unpleasant moment may be the price.
In this video, Timur and Boris in the Miracle of Technology program will tell you what properties the high-tech holofiber material has:
To better understand the picture, you should break the comparison into separate points:
This list may suggest that the synthetic winterizer is the last century and it is high time to abandon it. In fact, the idea is very close to the truth.
Today, there are many other fillers with which you can insulate clothes and shoes much better:
Today, synthetic winterizer is a symbol of low-quality and cheap products. Not the best advertisement but what can you do. In some regions where the winter is not so severe, jackets with this filling will fit all season. In other regions, you will have to look for an alternative or freeze for 2-3 months a year.
Most of the population, purely for economic reasons, cannot afford fur outerwear. There is always something else worth spending money on. No wonder, even today, many consider a fur coat - an indicator of prosperity.
But the matter is not only in financial possibilities, not everyone and not everyone will be pleased to wear the skin of a killed animal. You can reassure yourself that the animal died a long time ago, regardless of your actions, but still, such an acquisition makes you think.
Especially when there are other options:
Yes, synthetics do not look so chic, and you won’t be able to brag to anyone. Everyone wears approximately the same jackets, this will not surprise anyone. But on the other hand, you can reassure yourself with a couple of moments - the money saved will go to something more important and you can not think about who wore this fur before.
For the first time, thinsulate was "tested" by astronauts, later it was used in the manufacture of clothing for submariners. Jackets with this filling were worn by North Pole explorers. So the backstory of tinsulate is more than noble, in mass production the material went only six years after the discovery.
Today it can be found in the composition of jackets in the nearest store and immediately there will be a need to choose between it and holofiber:
The question is still the same again - to overpay and take a thinsulate, which will heat better and last longer, or save money and get by with holofiber? By and large, the answer depends on climatic conditions.
If you're expecting extreme cold temperatures, it's better to spend a little more and get some of the highest quality fillings. But if you are not going to go towards the Arctic, you should think about buying a holofiber jacket, it will quite cope with the tasks.
Hollofiber is one of the new synthetic insulation that is used in outerwear and shoes. It is thanks to this substance that high level keeping warm, and the jackets themselves:
Hollofiber is produced using thermal technology; glue or similar toxic substances are not used for manufacturing. The substance itself consists of thin hollow polyester fibers, which retain heat due to the presence of a cavity inside each thread.
Before winter, it’s better not to save money and buy a jacket in which holofiber will be used as a filler, what the sales assistant will tell you in all its glory. And this is not the case when a person is simply interested in selling an expensive product. Otherwise, I would probably suggest thinsulate.
In this video, technologist Artur Timofeev will debunk the myths about holofiber non-woven material, which is not to be feared when using this material:
Although natural fillers are in constant demand, not every person is ready to completely switch to their use only. It's about coats. leather jackets, down jackets. Some people simply cannot afford it, others do not like that animals were killed to create clothes. At the same time, the question “what to wear in winter?” must be decided every year. For these purposes, the chemical industry produces a large number of a variety of synthetic insulation, which are designed to protect people from the cold, although there are other areas of application. One of these new materials is holofiber, which already has a good reputation among buyers.
You must immediately say that this material is often called holofiber, but this word is spelled "holofiber" correctly.
The best heat insulator is air. ABOUT this rule remember both builders and clothing enterprises. Therefore, when creating heaters, it is important to create a material in the fibers of which air will be retained. Hollofaber is just such a filler. It is a hollow fiber twisted into a spiral. The great advantage of this material is that during production the fibers are not glued, but soldered. As a result, the use of substances harmful to human health is minimized.
In addition, holofiber, thanks to its structure, very durable. It does not deteriorate due to physical exertion such as squeezing, washing, and the like.
Hollofiber is found in three types:
Outwardly, this filler resembles synthetic fluff. But its structure is not homogeneous, but consists of small lumps. This is very good insulation, clothing from which can easily withstand 25-degree frosts. In some ways, it is similar to widespread artificial fillers, which is why it is often called a siliconized synthetic winterizer. A variation of this material is isosoft, it is more expensive and more difficult to manufacture.
If during production the material was processed in a heat chamber, then a new, more perfect view filler - thermofiber. Not only does it keep you warm, but it does not deform at all after washing. Another improved starting material is holofan (or holofan), which is a lightweight non-woven fabric suitable for tailoring.
In addition, there are several categories of holofiber, which differ from each other in density:
The density of holofiber ranges from 60 to 4000 grams per square meter canvas. The insulation used for sewing jackets weighs about 300 grams per unit of area.
Holofiber has a large scope. This is due to the fact that the material is completely non-toxic and hypoallergenic. while providing excellent thermal insulation.. Products containing this filler can be used by both adults and children.
There are several areas of use for this filler:
Holofiber has its advantages and disadvantages. Among its poles are:
In many ways, holofiber can be compared to cotton. However, this synthetic material, in comparison with natural, is resistant to deformation, does not stray into lumps, and does not wear out.
There are practically no drawbacks to the material, although there are some restrictions on care. So, if you wash a thing filled with holofiber often and too hot water, the fiber structure may be destroyed.
When buying a product in the production of which holofiber was used, you should carefully read the care recommendations that the manufacturer usually leaves. This applies to both clothing and bedding.
Products with holofiber usually have a shell, whether it be a blanket or toys, so both the filler and the fabric that covers it are erased.
The item is machine washable, but there are some restrictions. The water temperature should not exceed 40 degrees. It is better to use the delicate wash mode. The product will not deteriorate, the filler will remain intact, which, in fact, attracts many. Automatic drying can also be used. Care must be taken when ironing, the iron must not be too hot.
Since washing powder may remain in the fibers, it is better to use liquid products. If they are not, then you can take regular shampoo for washing. It is better to dry things vertically. The ideal place for this is a balcony or street. Then they will dry quickly, and the smell of chemicals will disappear from them.
If, nevertheless, such products as bedding, elements of upholstered furniture or toys turned out to be pressed through, then it is quite possible to restore the integrity and softness of the holofiber . To do this, you need to cut the fabric along the seam, pull out the filler and fluff it well with a brush.
Hollofiber is just one type of a large family of synthetic fillers. There are many other materials that may differ from it in some characteristics. However, they have in common that the basis for their production is thermohollow polyester fibers. Because of this, some consider them to be the same type of synthetics.
Among the heaters can be mentioned:
Thinsulate has the best thermal insulation properties. Clothing with them is thinner, but it absorbs moisture well. However, it is more expensive. In addition, when buying children's clothing, parents sometimes focus on the thickness of the product, how it looks, so they may not choose thinsulate.
Comfortel is cheaper, but it has a shorter lifespan. Produced in balls. Used to fill pillows, blankets, toys, furniture.
Sintepukh has properties similar to holofiber. It is made from polyester. Consists of fibers coated with silicone and glued together. Sintepukh is not as strong and dense as the filler described, but it is well suited for tailoring or furniture production.
Worth paying Special attention on the most common winter clothing insulation in our country - synthetic winterizer. It has been used for more than a decade when sewing coats, jackets, hats, trousers. Despite critical reviews, this filler does not lose ground due to its low price and ease of use. People are so used to it that they cannot immediately understand which is warmer: synthetic winterizer or holofiber, what is the difference between them, how to distinguish.
An important difference between synthetic winterizer and holofiber is that glue and secondary raw materials are used in its production, so such insulation can pose a health hazard. The synthetic winterizer protects much worse from the cold, it is airtight, it has a short service life. Such a filler is not sufficiently elastic and resilient. Small manipulations with clothes are enough to leave a gap in the canvas. And this will immediately reduce the degree of thermal insulation. Therefore, the answer to the question “Which is better: synthetic winterizer or holofiber?” - very simple. Holofiber in everything better than synthetic winterizer, but the latter is cheaper, so it will be in demand on the market for a long time.
The modern bedding market will offer you many options for every taste and budget. From famous useful properties buckwheat husks and the usual fluff and feathers to modern artificial fillers. Only here the word "synthetic" always alarms the consumer. But it must be admitted that last years even ardent adherents of all natural agree with the opinion that synthetics do not always mean "harmful and bad." Hollofiber is a prime example of this.
Holofiber is a synthetic non-woven material. Rather, this is the name of the trademark, under which more than a hundred varieties of this material are produced. Very soon, this brand became a household name and all products began to be called “holofiber”. From English hollow fiber means "hollow (empty) fibers". Indeed, the filler consists of tiny particles - hollow polyester fibers.. To make holofiber, they are twisted and subjected to high temperatures to be soldered together. After such manipulations, the fiber resembles a spring. Thanks to this technology, holofiber has a phenomenal resistance to any, even very strong, physical impact. For the first time this material was made at the Moscow plant of nonwoven materials in 2005.
The Hollofiber trademark belongs to the Thermopol company. It is the only company that produces nonwovens under this brand.
The manufacture of this filler, unique in its properties, is a technically difficult process. For a simple layman, the production of holofiber is very interesting. It should be noted that the raw material for the material is polyester -synthetic but non-toxic thread made of polyester fibers.
In general, the manufacturing algorithm looks like this:
Features of holofiber are directly related to the structure of this material:
Known types of holofiber produced in the form of a canvas: Soft, Valuemetric, Foot, Medium Hollofiber plates are used in construction as a heater Children's toys, pillows, blankets, winter clothes are the most popular areas of application for holofiber
Main positive traits holofiber:
With all these wonderful qualities, holofiber has only two drawbacks: more high price compared to other competing heaters and poor moisture absorption.
Thanks to their positive characteristics holofiber is widely used in various fields of activity: from toy production to construction. Depending on the application, they are used different kinds filler:
This material has proven itself well when used in tailoring workwear for workers in regions with a harsh climate. Weak hygroscopicity allows the filler to remain flexible and plastic even at critically low temperatures. It is important that holofiber allows clothing to be fire resistant. The insulation is used in overalls for workers in the mining industry, the uniform of employees of the Ministry of Emergency Situations and law enforcement agencies, in the equipment of tourists, hunters, fishermen;
Insulation "Soft" is widely used in overalls for harsh climatic zones
For many, holofiber, synthetic winterizer, synthetic winterizer are one and the same. But this is far from true. What is the difference between this filler and competitors?
I must say that these two materials are outwardly very similar. True, the synthetic winterizer is "older" than its competitor. It began to be used as early as the late 40s of the last century, while holofiber is a little over ten years old. The main difference between these materials is the manufacturing method. Hollofiber is created by exposing polyester fibers to hot air. For the production of synthetic winterizer, an emulsion of PVA glue is used, which makes it not as safe and environmentally friendly as holofiber. And also it does not pass air so well, it is less hygroscopic. If you get caught in the rain in a synthetic winterizer jacket, you run the risk of getting wet to the skin, and, alas, severe frosts are not up to him. Hollofiber keeps its shape perfectly, recovering quickly after even a strong physical impact, which cannot be said about his “sworn friend”. The synthetic winterizer becomes compressed over time, and after frequent washing it begins to deform. The only advantage of synthetic winterizer is the price: holofiber is much more expensive.
Outwardly, the synthetic winterizer is very similar to holofiber
The manufacturing process of these two materials, as well as their characteristics, are approximately similar. The production is based on the same hollow fibers. Due to this, synthetic down, like holofiber, is resistant to deformation, does not crumple after frequent washings. Both materials are hypoallergenic, environmentally friendly, reliable and durable.. The difference between them is in the structure. Sintepukh resembles natural fluff, only more tender and lighter, holofiber can have a different structure from balls to canvases and even hard plates.
The structure of synthetic fluff differs from holofiber in the absence of fiber balls
The advantage of natural fillers only remained in their naturalness and environmental friendliness. It is these seemingly remarkable properties that create a favorable environment for annoying neighbors - dust mites and other no less "attractive" microorganisms.
Down-feather filler loses on many points: hypoallergenicity, wear resistance, durability, price, ability to keep its shape. Someone may notice that the down filler is the warmest. Yes, this is a wonderful insulation, but holofiber can argue with that! No wonder it is used for workwear with a critical low temperatures. Products with holofiber perfectly withstand the test of an automatic machine; for fluff, especially with the addition of a feather, such a procedure can often be fatal.
I remember that in the early nineties, when my age crossed the “adolescence-youth” mark, it was decided to buy me a new “adult” coat for the winter. The store shelves did not please with the assortment, so my mother and I went to the local market, which was then called the "flea market". It used to be that they used to sell second-hand things at the "flea market", in the dashing nineties it was born new class- Shuttle. Here we approached the tent of such a shuttle. It was some kind of miracle: not a jacket, but not a coat either. Fashionable style, bright colors, zippers, rivets! I was dizzy from such beauty. To my mother's question: how much does such a coat cost? - the seller with an important look said that this is not a coat, but a down jacket. "With feathers? Mom was surprised. No, we don't need that. After much persuasion, my mother agreed. Looking ahead, I will say that my mother was right ... Problems began on the first day. A feather mercilessly climbed out of the down jacket. My classmates teased me for a long time as a “chicken coop”. But the main problem was ahead. After washing, the filler strayed into lumps of different sizes, and despite all my mother's efforts, there was no way to bring the coat into proper shape. Moreover, after the fashionable coat had dried, the smell of decaying feathers emanated from it and yellow stains remained on the fabric. The rest of the winter I wore an old coat...
natural fillers in many ways inferior to holofiber
To determine which filler the manufacturer used, just look at the label or label. Conscientious companies not only give truthful information on the composition, but also attach a special transparent bag with a sample of insulation. Did you find the treasured bag? So, before you is a high-quality non-counterfeit product. In appearance, you can easily determine what will be hidden under the lining of the down jacket. A sample of the filler is shown in the capsule on the product label.
But what if there is no such bag and you are tormented by doubts about the filler? Trust your tactile sensations:
One more distinguishing feature fillers - price. The most expensive products, of course, are made from natural down. Then from synthetic fluff and holofiber. The cheapest will be products from synthetic winterizer.
Another advantage of holofiber is ease of care. unpretentious and durable material does not require any special conditions to maintain cleanliness. It perfectly tolerates multiple washes in an automatic machine, as well as dry steam treatment. It dries fairly quickly room temperature. And what is important - it does not electrify and does not sit down. Do not forget that this only applies to holofiber. If this wonderful material can even be boiled, then the upper fabric in which the filler is dressed probably has its own care rules, so carefully study the composition of the fabric on the label. But holofiber is not afraid of any washing.
Do I need to iron products with holofiber? Again, if the top layer of the fabric requires it. But basically, ironing is not needed, because this filler keeps its shape perfectly.
kayabaparts.ru - Entrance hall, kitchen, living room. Garden. Chairs. Bedroom