Cleaning windows after repair. Washing plastic windows after repair: household and folk remedies

The renovation is complete, the only thing left to do is clean up. construction debris and dust. Usually metal plastic windows installed at the very beginning of such work. In the construction process, window structures are polluted no less than the rest of the room. How to quickly wash plastic windows after repair and return them original view? This process can be divided into two stages: cleaning the profile and washing the double-glazed window.

It doesn't matter if you plan to launder new PVC structures or those that have been in operation for a long time - the methods are universal.

Cleaning the profile from dust

If the windows are new and the protective film with the manufacturer's logos has not been removed from them, in most cases it is enough to remove the sticker and wipe the plastic with a damp cloth. If there was no sticker, then, as a rule, the window is covered with a thick layer of various dirt. What to do in this case and how to wash the plastic window from building dust? There are several ways:

1. Take a simple liquid detergent, dilute it with water and wipe down the plastic. This is usually sufficient to remove settled dust and residues. building mixtures.
2. Apply liquid soap on the profile and wait ten minutes. During this time, the dried dirt will get wet, and it can be easily removed with a damp cloth.

If after these procedures there are still traces of concrete or plaster, they can be removed with a clerical knife or blade.

How to remove traces of mounting foam

It may turn out that it was not easy to get on the profile, but do not worry, this situation can be corrected:

1. With a new spatula, carefully scrape off the cured foam. Often it is quite easy to give in, without undue effort. If the foam has eaten into the plastic, you will first have to clean it as much as possible mechanically.
2. Take a cleaner (available at any hardware store) or an acetone-based solvent. Soak a piece of felt with any of these liquids and apply to the remaining foam.
3. After the foam has soaked, vigorously wipe the profile with a piece of felt until the sealant residue is completely removed.

To protect the skin of your hands, carry out this procedure with rubber gloves.

What to do if glue residue has eaten in

The stubborn adhesive from the protective film is the most common problem on plastic windows during cleaning after repairs. But it can be removed using special tools.

Buy from any seller plastic windows special tool "Cosmofen". It is of several types and is indicated by numbers. "Five" - ​​the most gentle solution, "twenty" - the most concentrated composition. Describe your problem to the seller and he will tell you which brand to buy.

If it is not possible to purchase this tool, use building hair dryer: warm up the remaining adhesive and scrape it off with a new plastic spatula. For final cleaning, wipe the profile with an acetone-based solvent and wash it off with detergent and water.

If nothing helped

In the most advanced cases electromechanical polishing method is used. To do this, you will need a drill or a small Sander, special felt circles with GOI paste and liquid products for cleaning based on acetone. The polishing process is as follows:

• all succumbing dirt is removed with a cleanser and a spatula;
• a power tool with a special wheel polishes the profile, thereby removing a thin surface layer of plastic along with dirt that has ingrained into its structure.

You can also remove small scratches this way. If the scratches are very deep, cover them with liquid PVC (available from a window company) or white acrylic.

Cleaning and washing of double-glazed windows

Even if the builders worked carefully, a thick layer of construction dust would inevitably appear on the glass. Many try to cope with the problem with water and a rag. This method is simple but inefficient. After the end of the wash, there is still a white coating.

To use water alone, it must be washed at least ten times, and there is no guarantee that the dust will be completely removed.

How to wash plastic windows after construction in this case? Try this method:

1. Dissolve in one liter tap water a glass of vinegar or a tablespoon ammonia. If neither the first nor the second was at hand, then you can use bleach in the amount of fifty grams per liter;
2. Soak a sponge in the solution and wash the double-glazed window. After washing, polish the glass with a newspaper.

If the window is made with blind parts and it is not possible to reach some places, use a special brush with a telescopic handle. Dip the foam sponge in the cleaning solution, wipe the glass with it, and then turn the brush to the other side and rubber spatula remove water with residual contaminants.

1. When working with solvents and special products, use rubber gloves and take care of your eyes.
2. Avoid getting any product on rubber compressor. Aggressive components will ruin the rubber and break the tightness of the window. In certain cases, the problem will be irreparable, since some types of profiles are produced with rubber already soldered into them and there is no way to replace it.
3. Non-washable traces of construction putties and adhesive mixtures, can be deleted special tool for cleaning cement-lime pollution (sold at any hardware store).
4. When working with simple solvents that are not intended for PVC, be extremely careful. A high concentration of acids in their composition can corrode the profile.

It is not difficult to wash plastic windows from construction debris if it is done correctly. A little work - and your windows will shine white again!

Nowadays, plastic windows are inserted in almost every apartment. Over time, glass and window sills get dirty, so they need care. How to clean plastic windows? There are several ways.

So that washing the window does not give you much trouble, it is better to prepare special items in advance that will help you and not deliver extra hassle, namely:

• melamine sponge;
• foam sponge;
• rubber spatula;
• special brush for washing plastic;
• a soft fleece, cotton or flannel cloth to avoid streaks.

How to wash a plastic window from dirt?

Advice! A tool that will help clean plastic windows from dirt is soap solution and a soft washcloth.

However, these types of stains on windows can only be cleaned if they are fresh.

Before the hostess, the question will arise, how to wash the stains from the plastic window. Help comes household chemicals. It is possible that the stains will be washed off with dishwashing detergent, but it will take a lot of time to wash it off the window.

To wash, for example, a window sill made of laminated plastic, you can use a regular cleaning powder that will not damage the surface.

A spray bottle is a great way to get rid of stains.

A spray bottle is a great way to get rid of stains, but its strong smell is not suitable for people with allergies.

The cleaning of window sills includes washing the cracks that are located under the frame. In this case, a toothbrush will help you, which will clean hard-to-reach places without any problems.

By the way, the cleaning agent should be without soda, since its presence in the composition can cause scratches, which is highly undesirable. If you have soot on the plastic, then Whitespirit will do just fine. However, it is worth remembering that this tool is not suitable for all types of plastic. Some after processing begin to turn yellow. Therefore, in order to avoid such consequences, do not rush to apply the entire product to the plastic, but check its effect on a separate piece.

Methods for cleaning a plastic window after repair

The owners often think about how to clean the plastic window after repair, so that everything in the apartment is perfect. There are several methods.

Methods for cleaning a plastic window from concrete, putty and plaster

Important! Any stains that get on the window right away are much easier to remove than to wash off the dirt that got on the plastic window later.

Such substances include concrete, putty or plaster, which have hardened and are difficult to wash off from the profile and glass.

Here you can think about the question, how are building materials washed from a plastic window and how not to damage it at the same time.

Basically, building materials have properties to soak

Basically, building materials have properties to soak. Therefore, you need to wet the stains with water using a spray bottle or a rag, and after a while the treated areas will calmly move away from the window surface.

Sometimes it happens that water does not help, and then you need to carefully remove the stain with a blade.

Methods for cleaning a plastic window from mounting foam

Building foam is quite difficult to remove from the surface, so it is necessary to monitor the accurate work of the installers. If construction foam appeared on the profile, then it is removed with a scraper or blade, there is an option to treat the place of contamination with a special solvent.

Ways to wash a plastic window from paint

Paint stains containing water are removed with a hair dryer set to high power. Hot air coming from the hair dryer will melt the paint and it can be easily removed with a rag.

Paint stains containing water are removed with a hair dryer set to high.

However, there are paints and varnishes that can only be removed with acetone-free nail polish.

Drops of paint can also be removed by gently scraping off the surface with a blade.

Methods for cleaning a plastic window from adhesive tape

Important! To carefully remove the adhesive tape, it must be wetted with water using a sponge or treated with steam from an iron.

If it was not possible to remove the adhesive tape qualitatively, then special solvents or laundry soap will help.

What chemicals can be used to clean plastic windows after repair?

What is the best way to clean plastic windows, and what chemicals can be used? Will help with this:

• "Mr. Muscle" is an excellent tool that fights pollution and does not leave stains on the glass when correct operation;
• if the mounting foam got on the profile, then "Fenozol" will come to the rescue;
• "Bref" copes well with this task;
• "Cosmofen 20" is suitable for washing various kinds pollution;
• "Cosmofen 10" and "Cosmofen 5" act as solvents for stains;
• "Penosil" - excellent tool from pollution, is available in the form of a spray;
• solvent "646", which without special efforts remove paint, primer or other construction contamination;
• "San Klin" good remedy for glass cleaning.

"Mr. Muscle" is an excellent tool that fights pollution and does not leave stains on the glass when used correctly.

How and how to wash the glass after installing the double-glazed window?

The usual procedure that many housewives resort to in order to wipe the glass after installing a double-glazed window is to wash it with water using a rag. However, this is not effective method pollution control and complicates the procedure.

Therefore, how to effectively wash plastic windows after installation, we will consider in more detail below, namely:

• 1 tbsp must be dissolved in 1 liter of water. ammonia or a glass acetic acid. You can use bleach, which is diluted in a ratio of 50 g of lime per 1 liter of water;
• immerse the sponge in this solution, wring it out and wipe it, finish the procedure with a newspaper, wiping the glass with it to a shine.

How and how to wash plastic after installing a double-glazed window?

How to wash plastic on plastic windows? To do this, do the following:

• firstly, the plugs are removed;
• the surface must be wiped with a damp cloth to remove dust after installation and apply detergent;
• the profile is covered with a cleaner and left for a few minutes;
• excess agent is removed with a sponge;
• a rubber spatula cleans all corner butt joints;
• when the stains are removed, you can rinse off the product clean water.

How often should plastic windows be washed?

In general, to maintain cleanliness, it is advisable to wash the window once a month, although this procedure will depend on the place where the window opens. In a residential area, once every six months is enough, and near a busy highway, you will have to wash much more often. After all, the less dirt is removed from the surface, the worse the light passes through the glass.

Once you have washed the plastic windows with any cleaning agent, you need to ventilate the room.

A good hostess lives in concrete house or not, it's easy to find out. Just look at the windows, and everything will become clear. An exemplary housewife will not allow them to be dusty and dirty. She will make every effort and make sure that they will always shine with purity. But, unfortunately, sometimes stains remain on the windows. How to wash windows so that they are perfectly clean? We'll tell you all the secrets right now.

Training

After a long winter, all housewives think that it is time to wash the windows. Someone immediately gets down to business, while someone postpones this difficult task until later. Be that as it may, sooner or later you will still have to wash the windows and restore them to a radiant look.

Anything that seems complicated can actually be simple. The main thing is to know exactly all the secrets, rules and follow them exactly.

To get started, prepare everything you need. You will need a large sponge. It should be large enough to fit comfortably in the palm of your hand. Choose a sponge with a firm, hard side. It will come in handy if there are stains on the windows. For example, dirt, rain marks and “surprises” from birds.

In addition, you will need rags, preferably two. Give preference to those fabrics that will not leave lint on the glass after washing. Now in stores big choice rags that are designed specifically for washing windows. But still it is recommended to give preference to a product made of microfiber.

In stores, you can often find special brushes for cleaning windows. On the one hand, they are equipped with a sponge, and on the other, with a silicone scraper. Such a brush will also come in handy, especially when you need to wash windows from the side of the street, which is not easy to reach.

You will also need a convenient container for water, such as a wide basin or bucket. Don't forget newspapers. Yes, yes, don't be surprised! Despite the fact that the twenty-first century is outside the window and there are many window cleaners, newspapers will still come in handy.

Before you start washing, you should clean the window sill of everything that may interfere. These are flower pots, vases and other little things that are usually on the windowsills.

Types of pollution

In order to know exactly how best to wash windows, you first need to decide on the type of pollution. If you just want to clean the glass from dirt and dust, then this can be done easily with a regular window cleaner or just plain water.

If serious pollution remains after the repair, then stains of this type will not be easy to get rid of. In addition, it is difficult to get rid of stubborn stains and yellowness, which often spoil the perfect look of white frames.

If your house has wooden frames, then yellowed spots can be painted over. If you decide to paint wooden frames, then be sure to remember that you need to do this as carefully as possible so that later you do not have to wash paint stains from glass. Before you start painting, be sure to use a film to protect the glass.

In addition, after repair, especially if there was no protective film, the glass acquires other pollution. For example, a primer or cement, which will also have to be cleaned from the glass surface.

By the way, in order for the windows to get less dirty and not fog up in the cold season, glycerin will help you, which, after application, forms an invisible film and thereby protects the glass.

What is better to use?

At home, you can quickly and effectively clean windows in an apartment using various means. You can buy special liquids in the store and use them, or you can use folk remedies that are in the house of each of you.

Plastic windows are much easier to clean even from dirt after installation than a product with wooden frames. White window sill also needs a special approach.

The choice of means and devices depends on the degree of contamination and on which of these means will be in your home. You can use vinegar, salt, starch, ammonia, chalk, commercial window cleaner spray, or gel. Let's consider each of the options in more detail.

Facilities

Each hostess herself chooses when and how often she needs to wash windows. Someone monthly wipes the glass from the outside, and someone decides to do such cleaning twice a year. Be that as it may, windows need to be washed so that it is clean and light in the house.

Folk remedies are always good because they do not cause allergies, are safe and environmentally friendly. Improvised tools that are in every kitchen and in every home first aid kit, make it easy to clean the contaminated surface and give it a clean shine.

Surely in your house there is a regular dining room vinegar. Many are accustomed to eating dumplings with vinegar, while others use it as a detergent. In addition, you will need starch, which is often used in baking or as the main ingredient in making delicious homemade jelly.

Take a comfortable basin, pour a liter of water into it. Dissolve one tablespoon of starch in water. Can be used with both potato and corn starch. There is no fundamental difference in this.

After dissolving the starch, add table vinegar - 100 g, no more. Remember that this should not be a strong 70% essence, but the usual 9% that you eat. Next, you can add a teaspoon of regular medical alcohol.

Stir the mixture thoroughly. The tool can be applied to glass with a sponge or filled with a spray bottle, which will be much more practical. Do not forget that you should only work with gloves so as not to harm the skin of your hands.

This tool perfectly copes not only with dust and dirt, but also easily removes other contaminants. The main secret This tool is that it contains starch, which, among other things, gives shine to glasses and does not leave streaks on the surface.

Another tool can be easily prepared using the same table vinegar. Only this time it's even easier. All you need is vinegar (mind the percentages) and warm water. Add one tablespoon of vinegar to a glass of water. It is best to mix everything in a spray bottle, so it will be easier to apply the liquid to the glass. This simple tool will help you easily clean the surface.

In the same liquid, you can add a little (a couple of drops) dishwashing detergents. This will help get rid of small points of fat that appear on the glass in the kitchen after cooking. Especially if your kitchen does not have an extractor hood, then the windows probably need a more thorough cleaning. And such a mixture will help get rid of grease stains, give the glass a shine of purity.

Canteen vinegar combined with baking soda- this is perhaps the most traditional recipe homemade cleaner that is also suitable for windows. Such a tool will help not only rid the glass of dust or dirt, it is able to cope with serious pollution. For example, this tool perfectly removes traces of felt-tip pens or markers. To prepare the solution, take one and a half liters of warm water, add three tablespoons of vinegar and two to three teaspoons of regular baking soda.

If for some reason there is no vinegar in the house, then this is not a problem. There are many other tools that can be used to easily clean glass. For example, vinegar can really be replaced citric acid or fresh lemon juice.

For a glass of water you will need a tablespoon of powder citric acid. The water must be warm so that the citric acid crystals can completely dissolve. This tool is perfect for both ordinary windows and double-glazed windows. Liquid with citric acid perfectly removes dirt, does not leave streaks, besides, after that the house will be filled with a pleasant, barely perceptible aroma of lemon.

In addition, you can prepare your own concentrate for future use, which can be stored for a long time and will do an excellent job of cleaning windows. For this you will need glass jar. Next, you will need a peel from fresh lemons. After baking, many housewives have a peel with the peel removed and squeezed juice, which they simply throw away. It is from it that you can prepare a concentrate for washing windows.

So, there should be enough lemon peel to fill a half-liter jar by two-thirds. The rest of the free space in the jar must be filled with table vinegar. Then close the lid and put it in a dark place for a week, and even better for two. After that, you will receive a fragrant concentrate that can be diluted in water and used as a glass cleaner.

By the way, with this tool it will be possible to wash not only windows, but also, for example, tiles in the kitchen or in the bathroom. This cleanser works great and smells great. In addition, it is completely safe, unlike purchased ones. chemicals.

There is another tool that our grandmothers actively used, is ammonia. One tablespoon of ammonia should be added to a liter of warm water. The only negative of it is that it all smells not very pleasant and sharp. Therefore, if you use this particular tool, do not forget to immediately open the windows and thoroughly ventilate the room after the procedure.

With liquid soap or regular bar You can also make a great window cleaner. For half a liter of water, you will need about one teaspoon of liquid soap. Shake the mixture thoroughly until foam forms, then you can proceed to clean and wash the contaminated surface.

If you decide to prepare a soap solution using bar soap, then grate it first so that it dissolves better and faster in water.

Instruments

Despite the fact that everyone is trying their best to protect the windows during repairs, the glass still gets its "portion" of pollution. There are stains from paint, plaster, polyurethane foam etc. Washing this with a damp sponge or rag, of course, is not realistic. Moreover, traditional home or commercial products are also unlikely to help you with this.

Contaminants after repair should never be scraped off with a kitchen knife or a construction spatula. First, you can seriously injure yourself. Secondly, the surface of the glass will be damaged. So it is best to purchase a special scraper for glass. In any hardware store in your city, sellers will be happy to help you choose it. Believe that it will still be useful to you not only after the repair, so it would be very reasonable to purchase it.

Before you start washing windows after repair, thoroughly clean the frames and window sills from fine dust, dirt and other particles. This can be done with a conventional vacuum cleaner.

If during the repair you protected the glass with a conventional film, then remove it before proceeding with cleaning work. To make the film easier to remove, it should be slightly moistened. warm water.

Thoroughly dampen any dirt with a sponge. You may need to do this a few times to get them well hydrated. Then carefully remove the dirt with the scraper mentioned above. After all serious dirt has been removed, wash the windows in any way and means that are familiar to you.

Keep in mind for the future that if during the repair any of the building mixtures got on the surface of the glass, frame or window sill, it is better to wipe it off immediately with a damp cloth. Then, after it is completely dry, you will have to make an effort to get rid of such strong pollution.

It is especially important to immediately get rid of fragments of mounting foam, which dries quickly and sticks strongly to the surface.

• stains from plaster and primer need to be soaked hot water and then remove with a scraper;
• first, if possible, the mounting foam must be scraped off with a scraper, and only then soaked with warm water or a special agent, for example, a solvent;

• paint stains are easy to "revive" with a regular hair dryer. Just heat the stain strongly, the paint will gradually melt and it will be easy to wash off;
• if small splashes of paint remain on the glass, then they can be easily removed with a cotton swab, a cotton pad and a nail polish remover that every fashionista has;
• if masking or ordinary tape does not leave the glass surface, then thoroughly moisten it with water using a sponge;
• if there are traces of adhesive tape on the glass, they can be easily removed with a soap solution or nail polish remover.

My glass

Each hostess, in addition to wanting to clean the windows from dust and dirt, strives to ensure that there are no stains on the glass surface and that they shine in the sun.

Sometimes, after thorough cleaning, there are noticeable stains. This happens due to several factors:

• if the detergent you applied dries quickly, for example, from the wind or the hot sun, then stains will definitely remain. Therefore, choose a non-windy day for washing. It is best to do this windows early in the morning or in the evening when it is not too hot.

• stains remain if you did not previously clean the surface from a layer of dust, but began to wash it immediately with a detergent. Be sure to clean the glass from dust with an ordinary damp cloth, and only then wash it with any means.
• then, the rag during the washing process is too dirty, it can also cause streaks on the glass. Apply detergent with one rag, then remove residue with another clean rag, and dry the surface with a third. Then there will be no divorce.

To avoid divorce, heed the following tips:

• first you need to wash the frame, and then the glass itself;
• you need to wash the glass from top to bottom;
• when wiping the glass surface and drying it, change napkins more often;
• final stage window cleaning should be glass polishing. This can be done in the usual way, which was used by our mothers and grandmothers, that is, with the help of ordinary old newspapers or papers. Pay attention to the fact that newspaper paint is resistant, otherwise stains will remain;

• it is best to polish the glass with a newspaper when it is slightly damp, then it is guaranteed that there will be no streaks and particles of pile on the glass. As soon as the newspaper becomes wet, replace it with a dry one;
• old newspapers can be replaced toilet paper or nylon tights;
• get rid of stains, even if the glass is already completely dry and you see stains the next day, a cloth napkin will help. For example, it can be a waffle towel that every housewife has in her closet, or a microfiber cloth. To remove streaks, you need to apply a little window cleaner directly on the napkin, and not on the glass.

We clean the frame and window sill

Window frames also lose their ideal shape over time. appearance. At high or sub-zero temperature the paint that covers the frames deteriorates. Plastic products also lose their appearance, yellow spots appear on their surface.

Before you start washing the frame and window sill, remember the following. Never use as a wood frame cleaner. baking soda. This powder can only do harm, as there is a high probability that the paint will be damaged. Soda easily removes dirt, but with it the first layer of enamel. As a result, the frame will look shabby.

If you have wooden frames, it is best to clean them with soapy water. To do this, you will need a comfortable deep basin, warm water and soap. Of course, it is best to use liquid soap, as it does not need to be dissolved in water. It can be replaced with the gel you wash dishes with.

After making a soap solution, simply moisten a sponge in it and carefully rub the surface of the frame and window sill. Do not use hard sponges, otherwise the paint will be damaged, scratched or even its top layer will come off.

For a plastic frame, regular baking soda works great, as it will quickly remove any dirt. The main thing is not to simply apply the powder itself to the surface, otherwise you risk leaving scratches on the frame. Dilute the baking soda with a little water. The result should be a homogeneous thick slurry that can be applied to the surface with a sponge.

If your home has plastic double-glazed windows, then remember that the frames should not be cleaned with various powder products. They will only damage the surface of the frame and leave deep scratches on it.

If you decide to choose a purchased product, then pay attention to the fact that it should not contain a solvent or any acid. Such products effectively cope with pollution, but still spoil the surface. As a rule, after the use of such funds plastic frame can even change its color - it can show through dark spots that won't come out. It is better to give preference to an alcohol-based product.

Also, the usual soap solution, which we talked about above, is perfect for plastic. Perhaps this is the most effective and harmless means for cleaning both wooden and plastic frames.