How to lubricate the rubber seals of plastic windows. How to choose a lubricant for rubber seals? Using the product in a car

The correct operation of PVC window structures depends on regular and proper maintenance. After prolonged use, the mechanisms require lubrication. How to lubricate plastic windows to extend their service life and ensure comfortable operation.

Carrying out cleaning at home, we do not forget about cleaning double-glazed windows from dust and traces of rain. However, not everyone thinks that window care is not limited to external procedures. Internal mechanisms and accessories begin to work incorrectly over time, and the decrease in the quality of factory lubricants is to blame. Dryness leads to the accumulation of dust from the street and metal particles. Faults can signal themselves with creaks, rattles, clicking, jamming of the door. When buying a new window, the manufacturer gives a guarantee of 4-5 years. This is the expiration date of the factory lubricant. Unfortunately, not all sellers notify buyers of the need to carry out preventive maintenance, and therefore situations are brought to critical moments. If you do not respond to the problem in time, then the end can be sad. Grease for plastic windows performs the following tasks:

• reduces the level of friction of metal elements, increasing their wear resistance;
• facilitates closing / opening of the valves;
• protects against rust, creating a protective layer on the metal;
• the rubber seal retains elasticity, does not stretch and provides the necessary tightness of the sash.

All moving and rubbing elements, and seals on the frame and sash are subject to lubrication. On some models of PVC windows, you can see the corresponding marking with an oiler. Thus, manufacturers give a hint which elements need lubrication.

The situation is complicated by the fact that the structures installed with the advent of the first PVC windows have fittings and fasteners, which are now difficult to replace. Therefore, the wear of one or another element leads to a complete replacement of the internal mechanism or the entire unit.

How to lubricate plastic windows, types of products

Not all products are suitable for lubricating windows. On sale you can find ready-made kits for the care of plastic blocks, but their cost is not affordable for everyone. It is better to purchase everything separately, especially since half of these kits may not be useful.

How to lubricate the mechanism of plastic windows

The best choice for lubricating window mechanisms will be the following tools:

• silicone-based products made specifically for window mechanisms. When applied to a metal surface, a thin resistant film is formed. The lubricant is available in tubes or sprays. Both options will work;
• universal grease, which includes the same silicone. It is identical to a special tool, but can be used not only on windows. The consumption of funds is minimal, so one tube is enough for a long time;
• lubricating oil for sewing machines or bicycles. The tool is similar to machine oil, but better cleaning. It is easy to use and stays on the surface for a long time;
• mineral or synthetic lubricants. The main thing is to choose products that do not include acids, aggressive reagents and abrasives.

It is not recommended to use any vegetable fats, petroleum jelly, shoe polish for lubrication. This is due to the fact that vegetable oils leave a film on the mechanisms that dries for a very long time, about two weeks. During this time, a large amount of dust accumulates on it, which makes it difficult for the fittings to work, accelerating their wear.

How can you not lubricate the fittings of plastic windows? Means with acids and chemicals destroy the metal surface, “eat up” the anti-corrosion layer and oxidize parts. Gun and car oils are also not suitable. The former are expensive, and they do not perform protective functions in relation to windows. The latter have a low degree of purification.

How to lubricate rubber bands on plastic windows

Seals also need care. You can buy special lubricants, or you can use improvised means:

• silicone-based lubricants;
• silicone sponges;
• pharmacy glycerin, but only in its pure form, without cosmetic additives.

Do not use Vaseline or baby powder. Also do not choose products containing a solvent, alcohol and alkali. They will lead to the destruction of the rubber structure.

Controversial opinion exists about the use of WD-40. Some argue that the use of an aerosol will create a protective waterproofing film on the surface. Others say that at low temperatures, the product can thicken and interfere with the operation of window mechanisms. If only this tool is at hand, it can be used to lubricate the seals.

Criteria for selecting window lubricants

It is necessary to take care of window structures with high-quality and proven means. Poor quality lubrication will reduce the life of the mechanisms. When buying, be guided by the region of residence, because some products tend to "tan" at low temperatures.

Ask the seller in the store which lubricant is suitable for your plastic window model. Choose aerosol products. This is the most convenient type of lubrication with economical consumption. With the help of spraying, you can reach the most inaccessible places of the mechanism. You don't have to buy expensive stuff. Often they include components found in inexpensive lubricants, and their principle of operation is the same.

How to lubricate plastic windows yourself

It is not necessary to be an expert to carry out preventive maintenance of window fittings. To do this, you need to know the sequence of actions and have the necessary materials on hand. Be sure to remove all decorative trims from the hinges and handles.

Cleaning plastic windows

Before proceeding with the lubrication of the elements of the window structure, you need to thoroughly clean them from accumulated dirt and dust. The window sashes open wide and look good. All brackets, bolts and other moving parts need to be cleaned.

For cleaning, use a damp soft cloth, sponge or brush. Along with the dirt, a layer of old grease is also removed. After wet, use a dry cloth and wipe all parts dry. In warm weather, you can leave the window to dry on your own. Remember not to use any detergents. You can use WD-40 for metal elements. The frame is washed with ordinary soapy water. For hardened dirt, use a stiff brush, paying particular attention to the joints between the door and the frame.

Hardware lubrication

Before starting the lubrication procedure, you need to understand where to lubricate plastic windows. The lubricant is applied to all elements that move during operation. If the work is done with an aerosol, then the process is greatly simplified. It is enough to spray the agent at a distance of 3-5 cm. It is necessary to lubricate with oils by digging them onto the guide rails of the products, all rotary mechanisms and grooves. 2-3 drops will be enough. For convenience, oil lubricant is drawn into a syringe or a small oiler, the tip of which is directed to the mechanism element. In order for the lubricant to penetrate well between the moving parts, the window sash must be closed. Opening and closing in different modes is best done several times. This will allow the tool to quickly disperse to all parts and lubricate them better.

Silicone is often used to lubricate the window. Before the procedure, the canister is shaken well several times. The spray hole is directed to the lubricated element at a distance of 3-5 cm. By pressing the valve, release the agent for about two seconds. This will be enough for the grease to get inside. Silicone in cylinders is good because, due to its transparency, it does not leave marks on the surface. After lubricating all the fittings, the lubricant drips are wiped off with a clean cloth.

Lubrication of seals

In order for the sealing rubber on the plastic window not to dry out and ensure a snug fit of the sash, it must be regularly lubricated. Before lubrication, the window opens completely, providing access to all rubberized places. The sealant is thoroughly cleaned with a brush from dust, and also washed with a soapy solution and left to dry completely.

As a lubricant, professional products or those that are suitable from the home arsenal are selected.

The product is applied to the seals and evenly distributed over the entire surface with a cotton swab. You can choose grease in a container with a roller at the end. It will be more convenient for them to apply the product.

The frequency of the procedure for lubricating plastic windows

The frequency of lubrication of PVC windows depends on the frequency of their use. Living conditions also matter. For example, those windows that face the road will get dirty more and faster. Accordingly, they need to be cared for more often, about once a year. It is better to lubricate plastic windows in early autumn or late spring at positive temperatures. If you notice extraneous sounds coming from the sashes between periods of lubrication, then do not wait for the right time. Tightening with the procedure can adversely affect the quality of fittings and sealing elements.

Despite the fact that modern plastic windows are made of quality materials and provide proper comfort, they are not immune from damage, wear and tear. This applies to all elements of products, including rubber seals. An inconspicuous element protects the house from drafts, prevents the ingress of moisture, dust, and reduces street noise. But seasonal temperature changes, humidity, dirt destroy rubber components. How and with what to process the sealant of plastic windows so that it lasts longer? For this, there are special solutions.

Why care for sealants?

The rubber elements of PVC windows are elastic and are located along the perimeter of the light opening. Due to the close contact of the sashes with the frame, they are subjected to cyclic compression loads on a daily basis.

No matter how good the element is, over time it will wear out and lose its functions. In production, to delay the unpleasant moment, a lubricant is used for rubber seals, enveloping them with a thin film.

After a couple of years of operation, the protective layer comes off completely, and the user has to solve the problem himself. To this end, he needs to purchase some kind of solution for the care of rubber objects.

Features and types of professional tools

A self-respecting supplier of plastic windows has in its product range kits for the comprehensive care of PVC products. Similar products are offered by Robitex, KBE and EdelWeiss, but the first products for rubber components were produced by the German company Fenosol.

The special liquids sold by the listed companies are safe for humans and animals, non-toxic and biodegradable. The main ones include:

• FenoFLEX.

The brainchild of Fenosol is supplied in 50 ml tubes at an average price of 500 rubles. It does not contain alcohol, which has a detrimental effect on rubber.

• General purpose silicone grease.

Low viscosity product that lays down in an even layer and prevents the effects of moisture. Colorless, odorless substance with heat resistance from -50 to +230 degrees. It can be found in a hardware or hardware store, it costs about 100 rubles.

• WD-40.

A unique liquid for all occasions, which has found application in the field of PVC windows. Mineral oil (the main component of the mixture) covers the silicone seal on the window with a waterproofing film. The hydrocarbons included in the composition lower the viscosity. The WD-40 package is complemented by a convenient tube that allows you to apply the substance exactly along the length of the seal. The price of 100 ml of the product is 80-100 rubles.

The quality of the listed lubricants for the care of rubber seals is highly appreciated by consumers, however, even professional products have more affordable analogues.

Household care products for seals

If it is not possible to purchase imported products, you can get by with what you probably have in everyday life. Among them stand out:

Colorless, odorless, viscous liquid. It is used in cosmetology, acts as a by-product of saponification of fat. From the point of view of chemistry, glycerin belongs to alcohols, however, the experience of use says that it is safe for PVC windows. It is available - in a pharmacy you can buy 25 ml of the substance for 10 rubles. The bad thing is that it poorly protects the rubber from the effects of precipitation, quickly washing off.

• Petrolatum.

Well softens rubber, covers it with a dense colorless layer. It is insoluble in water, therefore it is good as a waterproofing agent. Vaseline has two disadvantages:

1. It has low frost resistance (-25 degrees).
2. Melts at a temperature of +27 degrees.

This substance will not last long, but petroleum jelly is a good alternative to products that contain alcohol. You can buy it at a pharmacy; 75 ml will cost 30 rubles.

Proper processing of rubber elements

Buying the right product is not enough - it is important to know the key aspects of caring for rubber seals. The user should follow the tips below:

• it is necessary to take care of PVC window elements made of rubber twice a year - before winter and summer;
• first, the seal is cleaned - wiped with a damp cloth, sponge, then with a dry cloth;
• if the seal has petals, they are lubricated first, then the rubber on the outside;
• when using viscous products, use brushes of different thicknesses;
• after lubricating the sealant, it must be allowed to dry for about an hour, after which the window sashes can be closed.

There is no easier way to extend the life of PVC windows than by regularly lubricating rubber seals with quality alcohol-free solutions. The user, spending only 20 minutes annually on the care of elastic elements, will increase the durability of the plastic structure by several times.

https://www.youtube.com/watch?v=WRT4ej5Al9k Video can "t be loaded: Plastic window care tips (https://www.youtube.com/watch?v=WRT4ej5Al9k)

Almost every person in a house or apartment today has plastic windows. We buy them because advertisers tell us they last forever, but they don't. Few people know that the rubber seal needs to be lubricated from time to time, and as soon as they find out about this, the question immediately arises, how to lubricate the rubber bands on plastic windows? The information in this article will help you make the right choice when solving this issue.

Why is it necessary to lubricate seals on plastic windows?

Elastic band on window constructions we call an elastic seal around the entire perimeter of the sash, as well as a light opening. It is used to ensure that the sashes fit snugly against the frame, as well as to prevent cool air from entering the apartment.

The elastic band has a huge load every day, which comes from squeezing, as well as unclenching. Of course, no matter how effective and high-quality the sealant is, it will wear out sooner or later. In order to reduce the wear rate of the seal, even at the production stage it is coated with a special protective compound, which forms an invisible film layer on the rubber band.

Lubricating rubber bands on plastic windows is necessary in order to renew the protective layer, as well as soften the seal and restore its elasticity.

Important! If the part is completely worn out and does not perform its main functions, it is recommended to replace the seal in plastic windows.

How often do you need to change the lubricant in plastic windows:

1. It is recommended to change the lubricant of the mechanism of the sealing rubber bands of the fittings at least once a year.
2. In order to service the window system, choose either spring or autumn.
3. You can lubricate structural elements 2 times a year - in spring and autumn, to ensure really high reliability of the entire system.

Important! The frequency with which it is necessary to change the lubricant most of all depends on the factors that make it unusable, for example: dirt, sand, smog, grease.

How to lubricate the rubber seals on plastic windows?

The main task of a lubricant for a rubber seal is to protect it from interaction with moisture and cold. A large number of funds can cope with this task.

Important! The basic rule here is that these products should not contain a single gram of alcohol, alkali or solvents. These substances destroy the rubber structure, and also reduce the possible shelf life and operation of the seal.

So, how to lubricate the rubber bands on plastic windows?

General purpose silicone lubricants

Technical silicone is one of the best and most affordable seal and rubber care products. Silicone-based products are available in various forms: in the form of an emulsion, liquid and paste. It can be sprays, aerosols, pencils and so on.

Important! It is most convenient to use a product that can be easily applied to the surface of a soft cloth, and then gently wipe the surface of the seal with it.

Silicone lubricants have the following advantages:

• relatively low viscosity;
• lays down on the surface in an even layer;
• protects the rubber seal from the harmful effects of moisture;
• slows down the wear period;
• silicone has no smell or color, which is why it can be used for seals of absolutely any color;
• the temperature resistance of silicone is in the range from - 50 C to + 230 C.

Lubricate all rubber profiles with a silicone compound, never with silicone grease that is designed for metal surfaces. Their difference is very significant:

• a lubricant that is intended for metal forms an invisible film on the surface of the material;
• a special silicone compound penetrates into the material from which the seal is made.

Important! Silicone compounds retain the properties of the seal itself at all times of the year, preventing its destruction from heat, cold, sunlight, and moisture.

Professional construction chemicals

It is most convenient to use WD-40 aerosol. It can simply be sprayed over the entire length of the rubber seal.

Kits that are designed for comprehensive maintenance of PVC structures are also an excellent option to lubricate rubber bands on plastic windows.

Important! It is quite difficult to find a professional tool that is designed for sealants. As a rule, all compounds are made to serve rubber products in general. Basically, they can only be purchased as part of a plastic window maintenance kit, which also includes:

• detergent for PVC profiles;
• aerosol for parts made of metal.

Similar kits are available from companies: Edel Weiss, KBE and ROBITEX. The pioneer in the production of comprehensive maintenance was the German company Fenosol, and we will talk about it, namely, their product, which is designed to service FENOFLEX rubber seals.

The manufacturer claims that FENOFLEX:

• retains the original elasticity of the rubber parts of the window;
• increases their wear resistance by 20-25%;
• increases the resistance of rubber to extremely low temperatures.
• all the elements that are in the composition are biodegradable, non-toxic, and most importantly, safe for humans.

It is due to the absence in the production of absolutely any solvents, as well as alcohol, that the composition in no way affects the structure of plastic and rubber.

Non-professional means

Glycerin is a colorless viscous liquid. It has a special application in cosmetology, as well as traditional medicine. It is a waste product of saponification of fats.

Important! Scientists chemists attribute glycerin to a number of alcohols, but unlike such substances of this series, it is in no way dangerous for PVC.

From glycerin, the seal will become softer, more elastic, covered with an invisible film layer, which provides long-term protection against adverse effects on the entire structure as a whole and extends the life of the window.

Important! A clear disadvantage of glycerin is a very strong instability to water - it dissolves in it. In other words, it has a very low level of waterproofing. For the same reason, you will have to use such a tool much more often than any product of professional building chemistry for the care of PVC windows.

Also, to resolve the issue of how to lubricate the rubber bands on plastic windows, such a very affordable tool as petroleum jelly will also come in handy.

How to properly lubricate the rubber seal of a plastic window?

Look at where the rubber seals are located on your windows. As a rule, they are located on window design elements, for example:

• around the perimeter of the frame;
• along the inner as well as the outer perimeter of the double-glazed window;
• along the inner perimeter of the sash.

Regardless of the means you choose, to lubricate the rubber bands on plastic windows, like this:

1. First, wipe the rubber seal with a soft cloth or a sponge that you previously moistened with soapy water.
2. Wipe dry.
3. Apply grease between the seal plates, if any.
4. Next, apply the product over the entire outer surface of the gum.
5. If you prefer viscous and creamy products, for example: silicone grease, petroleum jelly, stock up on a soft brush. With its help, you can evenly distribute the product or do it with your hands.
6. In the event that you use liquid products, for example: glycerin, you cannot do without a cotton pad. It will take 5-10 minutes to lubricate the entire seal.
7. You can close the gate immediately.

Important! Never allow oil or grease to come into contact with the seal. Because of them, the sealant material may begin to swell.

This post has 1 comment.

In order to avoid problems with opening the car in winter, it is necessary to prepare for the cold season and lubricate the doors with an optimal composition that prevents rubber seals from freezing.

Means for lubricating seals

The main condition for choosing a product is resistance to low temperatures. For lubricating seals, a special hydrocarbon composition designed for the conservation of individual parts is perfect. Their list includes polymer silicone grease. It has an indispensable property to endure cold.

Lubricants are designed to protect rubber seals from freezing and cracking, improve sealing, thermal protection and thermal insulation.

In the absence of a special tool, you can lubricate the rubber bands on the doors with technical petroleum jelly, which will have a similar, although not so long-lasting effect. For these purposes, glycerin is also suitable, softening the rubber, preventing it from cracking and freezing.

Silicone lubricants will help to effectively lubricate door seals, which have several advantages:

• ease and versatility of use;
• environmental Safety;
• affordable price;
• antistatic properties that prevent the accumulation of dust on the rubber bands;
• moisture repellency. Given the ease with which condensate turns into ice and leads to the formation of ice seals on rubber bands, this property is very important in winter.

Silicone lubricants are available in the form of gels, pastes, liquids, aerosols.

Among the products based on silicone, the following are popular:

• "HORS". Subject to operational requirements, it is not washed off with water, even hot. The disadvantages include a sharp specific smell and the absence of a thin tube that allows you to more accurately apply the product;
• "ELTRANS". This Russian development works in any temperature range. It has a pleasant smell, leaves a spectacular gleaming layer on the seals. Alas, there is also no “nose” for precise application;
• Step Up. American product operating in the temperature range -50°С/+200°С. Increases the wear resistance of seals, promotes moisture repellency;
• BBF. It has properties similar to the previous described tool;
• "Hybrid Silicone Lubricant UNI-S". It must be applied carefully, trying not to touch the glass, because. it is difficult to wash off;
• "Auto NANOPROTECH". In addition to anti-freeze properties (up to -80°C), the grease has anti-corrosion, water-repellent and penetrating effects. With its use, the stable operation of the seals is improved.

Remedies from the world-famous car brands XADO, Liqui Moly, Forsters will help save the car from door freezing. To maintain the condition of the seals in the winter, it is advisable to use the listed or similar compositions 1 time / 2 weeks.

Deserved popularity in the protection of seals has gained mastic "Protective and decorative paint", which slows down the wear of rubber seals, protects them from aggressive atmospheric influences and improves their appearance.

Choice of remedy

To determine the type of lubricant, you need to read the instructions for use and technical specifications. Glass seals are best treated with paste or gel; for trunk, hood and door seals, gel or aerosol is best suited.

The quality of the product is determined by the expiration date, as well as the manufacturer's rating and cost - low cost can probably indicate inadequate quality.

Emergency help

It is unlikely that there will be at least one car owner who is not familiar with WD-40. It was originally developed to remove rust from metal surfaces, today it is used as an indispensable lubricant. In the winter season, a spray can with it as an emergency assistant should always be in the trunk.

The lubricant is produced in an aerosol, the bottle is equipped with a thin tube, which allows it to be applied pointwise to the most inaccessible places, for example, under the seal from the outside. Why such caution? The composition of the product acts quite aggressively on plastic and rubber parts, which can cause damage to them. But for urgent defrosting of certain moving joints, this spray has no equal.

WD-40 grease can be used to lubricate door locks in the cold if they freeze. As its cheap alternative, some drivers use ordinary alcohol for this purpose.

1 comment on the entry “How to lubricate rubber bands on car doors in winter”

Educational material. So many useful things listed, I will definitely remember. Personally, until now, I have used SILICONE spray. Never had a problem with seals. Doors open easily in any cold. The thing is truly universal worth two hundred rubles. Before the onset of cold weather, I treat the rubber parts of the car with this spray. I'm not lazy, I climb under the car, I spray anthers
ball bearings, CV joints, steering rods. It's no secret that a torn anther is the cause of the failure of the listed parts. Before lubricating the rubber seals, be sure to wipe them dry. Then I spray on. I am not greedy, I also lubricate handles, hinges, door guides. I recommend lubricating the grooves along which the side windows move. This will make life easier for power windows in severe frosts. I want to note that after washing the vehicle, the rubber lubrication activities should be repeated. The anthers do not need to be re-lubricated.

All components of the system that use liquids - oil, refrigerant, grease for power steering, transmissions - are equipped with sealing elements. The presence and operability of seals helps prevent leakage of consumables. However, to ensure proper operation of the sealing components, the parts must be periodically lubricated. From this article you will learn what are the pros and cons of silicone grease for rubber seals and what such products are produced in.

[ Hide ]

Composition and functions of matter

Lubricating silicone for cars in the form of an aerosol or gel is an artificial substance developed on the basis of organic and inorganic materials. The base of the product is silicone oil or lithium grease and other elements such as hydrocarbon solvent, propellant, etc. Thickeners may be used in the grease.

What are the requirements for the substance?

• must be compatible with the material from which the sealing elements are made, as well as the spare parts adjacent to them;
• product performance is maintained over a wide temperature range;
• the substance must reliably protect the rubberized elements from rapid wear and cracking;
• the treatment of parts with lubricant should lead to a decrease in friction;
• one of the main requirements is that the product must provide a separating effect, that is, after its use, the parts should not stick to each other;
• when processing sealants, the substance should increase the tightness of the joint;
• the product must be resistant to water, so that the substance does not wash off as a result of contact with lubricated parts.

The main functions of the substance:

1. Recovery. The use of the substance should ensure the preservation of the elasticity of the processed elements. If the parts become soft during operation, the product should quickly restore the elasticity, functionality and appearance of the seals.
2. Insulating. Lubrication protects the rubber elements from water.
3. Lubricant. The treatment of parts with a substance allows the sealing elements to better adhere to various surfaces.
4. Protective. It consists in ensuring the durability of the service life of parts. The lubricant must not only prevent water from attacking the seals, but also prevent the formation of corrosion on metal components. High-quality lubricants do not allow dust and contaminants to enter the structure.

Lubrication of door seals

Substance properties:

1. Increased adhesion.
2. The lubricant does not adversely affect the surfaces being machined.
3. Bioinertness. Due to this property, bacteria and harmful organisms cannot normally exist in a silicone environment.
4. Increased dielectric as well as antistatic characteristics. This allows the product not to pass voltage and current through itself.
5. Elasticity. One of the main properties.
6. Product resistance to oxidative reactions. Allows to increase its resource of operation and to provide reliable protection of details.
7. Good anti-friction features.
8. Environmental friendliness. The use of lubricant will not harm human health and the environment.
9. Durability. Quality products are characterized by a long evaporation period.
10. Fire resistance. The substance will not flare up even when working at elevated temperatures.
11. Resistant to alkaline elements and weak acidic compounds.
12. The lubricant is odorless and colorless. Due to this, its use will not spoil the appearance of the parts. In some cases, food manufacturers add flavorings to the composition of substances.
13. The ability of a substance to transfer heat well.
14. Wide operating temperature range. Due to its composition, silicone grease can retain all its properties and characteristics when operating under extreme temperatures. On average - from 50 degrees below zero to 200 degrees heat.

Types and forms of release

Briefly about the varieties and forms of product release:

1. Paste. Thick lubricant in the form of a paste is easy to use. The main disadvantage of such a substance is that when using it, the car owner will not be able to process hard-to-reach places. We are talking about locks, hinges on doors, etc.
2. Gel. Not much different from pasta, except for the consistency. The gel is more liquid.
3. Liquid. The use of liquid lubricant is relevant in complex mechanisms. The main disadvantage of the substance is that it can spread.
4. Spray can. This type of lubricant in the form of a spray is easy to use. But it is best used for processing large surfaces. During operation, the spray will scatter in different directions, if the manufacturer has not provided for the presence of a special tube in the kit. The use of lubricant can lead to its contact with the hands and clothing of a person, as well as surfaces that should not be treated. The substance in the form of an aerosol needs to be rubbed during application. Otherwise, greasy spots may remain on the surface.

User Big Boys Toys in his video told how to properly use the lubricant.

Overview of lubricants

Lubricants may differ from each other in terms of application, as well as the presence of certain odors. Temperature ranges will vary by product.

There is a large selection of silicone lubricants for rubber seals on the market, consider the most popular substances.

WD-40

One of the most famous products, comes in the form of a spray. Initially, this type of lubricant was intended to remove corrosion on metal parts of a car.

In the course of use, other useful characteristics were discovered. These include:

• perceptive ability;
• creating a protective layer to prevent the negative effects of moisture.

In fact, WD-40 allows you to increase the resource of using rubber elements. If the substance comes into contact with polystyrene or polycarbonate, then it destroys these compounds. When using WD-40 lubricant, care must be taken not to allow it to come into contact with mucous membranes.

Glycerol

Characterized by:

• low solidification temperature;
• high hygroscopic characteristics.

Therefore, glycerin can be used to protect rubber seals. As a result of processing, the lubricant softens the rubber and makes it elastic, which helps prevent cracking. The disadvantages of the product include the fragility of its action. For high-quality surface treatment, the car owner will have to periodically use lubricant.

Very Lube

It is used for processing plastic and rubberized parts and elements. The use of lubricant allows you to restore the color of the components, as well as protect them from rapid wear. The main feature of the product is the presence of detergent characteristics. Lubrication allows you to penetrate deep into scratches and microcracks, performing and cleaning from contaminants. Due to the restoration of the original color, the substance improves the appearance of rubber products. Lubrication prevents cracking of parts and prevents them from freezing in the cold season.

The main disadvantages include the fragility of the protective coating. The motorist will often use lubricant.

Nanoprotech

The lubricant has gained great popularity among consumers due to its characteristics:

• waterproof;
• anti-corrosion;
• penetrating;
• lubricating.

The use of substances helps prevent freezing of seals on moving parts and mechanisms. The product performs well when used in the Far North, since its freezing temperature is -80 degrees. The substance completely pushes moisture out of microcracks on the treated surface. Its use allows you to keep rubber seals elasticity. Plastic, metal parts, paintwork is not destroyed as a result of the use of Nanoprotech. The use of a lubricant prevents the formation of an emulsion. This product does not contain rubber or Teflon.

Rezin

As a result of application, the lubricant forms a polymer layer that provides water-repellent characteristics to rubber products. The temperature range is from -50 to +50 degrees. Lubrication is considered all-weather, so it can be used at any time of the year. One of the main features of the product is the high content of silicone in the composition of the lubricant.

Compared to other sprays, its volume in the Rezin base is five times larger. Due to the presence of a special dispenser in the form of a sponge in the kit, it is convenient to use for processing hard-to-reach places. When used, the lubricant does not flow out, it is not washed off with water. Since this type of product is not an aerosol, it does not settle in the air during use, does not irritate human mucous membranes, and does not settle in the lungs.

step up

The product is produced by a well-known company from the USA, engaged in the production of automotive cosmetics. The lubricant is characterized by good water-repellent characteristics. Its use allows you to protect rubberized parts and elements on the doors and windows of the car, as well as components in the trunk and engine compartment of the car from rapid wear. The operating temperature range varies from -50 to +200 degrees. Included with the spray is a thin tube that allows you to treat even the most hard-to-reach surfaces.

Eltrans

The product is produced by the Russian company of the same name. Lubricants of domestic production are designed to protect plastic and rubberized elements. The use of the substance ensures the creation of a protective coating on the parts, which not only improves their appearance, but also protects against the negative effects of water and frost.

A distinctive feature is the addition of an aromatic additive to the composition of the lubricant, as a result of which the product does not have an unpleasant odor. According to consumer reviews, the main disadvantage is the lack of a tube in the kit, which makes the use of the substance impossible for processing hard-to-reach parts.

Liqui Moly

The Liquid Moli company produces Silicone-Fett and Silicone-Spray products. Reviews and numerous studies show that this manufacturer's lubricant is of high quality. Thick substances are supplied to the market in special tubes, their use is relevant for processing door hinges. Sprays have penetrating characteristics, which provides protection for parts located in hard-to-reach places. The product kit does not include the handset. The temperature range of use is from -40 to +200 degrees.

Molykote Dow Corning 200/1000

Belgian products made in the form of aerosols. They help prevent the negative effects of water on the rubber and metal elements of the car. The lubricant effectively protects seals even at critically low negative temperatures. Molykote Dow Corning 200/1000 is considered one of the best in terms of strength and durability compared to other lubricants.

Turtle Wax

Designed specifically for processing rubber and plastic parts. Turtle Wax can also be used to lubricate metal as well as textile components and parts. The substance is considered universal and allows you to reliably protect and isolate the rubbing parts of the car from the negative effects. In the cold season after washing the vehicle, Turtle Wax prevents rubber seals and gaskets from freezing, displaces moisture from them and significantly reduces the coefficient of friction. Also, the product effectively insulates high-voltage cables and the ignition switchgear cover if there is high humidity outside.

Silicot

Water-repellent substance produced by a Russian company. The temperature range of use varies from -50 to +230 degrees. The lubricant is characterized by an average level of viscosity, its use is more relevant on large surfaces and parts. Also means possesses high adhesion. Belongs to the category of universal products.

MS Sport

This Russian-made product is characterized by a high content of silicone with fluoroplast in the composition of the substance. Due to this, the operation of MC Sport is allowed in pairs, that is, in nodes where one of the components is made of steel or other metal, and the other is made of plastic, rubber, leather, etc. The use of the product is allowed not only for processing machine parts, but also in everyday life.

The structure of this lubricant is semi-solid, so its operation is possible in bearing devices and other lightly loaded rolling and sliding mechanisms. Studies have shown that the product effectively protects machined parts from the effects of dirt, rust and liquid. MS Sport has water-repellent characteristics. This lubricant does not pass current through itself, is not washed off under the influence of water and effectively removes squeak. Due to the formation of a frost-resistant layer on the surface of parts, the substance prevents the effects of corrosion on car elements.

Applications of the material

Lubricants can be used not only for processing automotive parts, but also in everyday life.

Using the product in a car

What parts of the machine can be lubricated:

• plastic interior parts, for example, control panel or center console;
• the substance is used for rubber bands and seals on car doors, luggage compartment, hood, windows, fuel tank caps, etc.;
• hinges and locks on car doors;
• starters;
• electric wiper blade motors;
• guide bushings on seats, ventilation hatches, as well as power windows;
• rubber elements of wiper blades;
• end parts of machine tires;
• disks on car wheels;
• rugs;
• bushings of stabilizers, pillows fixing the exhaust pipe, cooling system hoses, silent blocks, etc.;
• places on the car body where the paintwork has broken off, this helps to prevent the formation of corrosion in the future;
• plastic bumpers of cars, if scratches began to appear on their surface;
• seat locks in the cabin;
• seat belts.

From the video filmed by the Autochemistry and Autocosmetics channel in Kyrgyzstan, you can learn about the use of lubricants.

Features of the choice of lubricant

When buying a product, you must be guided by the following criteria:

1. Price. Very cheap products usually do not boast good performance and high quality.
2. Availability. It is important that in the city where you live, there is a store where, if necessary, you can quickly buy the substance.
3. The main criterion is quality. We recommend purchasing lubricants only in trusted and certified stores. If the seller operates without a license, it is quite possible that he will buy low-quality and counterfeit products and pass them off as originals.
4. Lubricant type. When choosing a type, you need to decide for what purposes the product will be used. Spray on hard to reach surfaces. In other cases, you can buy a paste or gel.
5. Pay attention to the technical specifications. They are listed on the product label. Taking into account the technical properties and features, you will be able to choose a quality product that is suitable for fulfilling your goals.
6. Substance manufacturer. The products described above have proven themselves in front of our compatriots. We recommend choosing lubricants from well-known brands so as not to purchase a low-quality substance.

You can learn about the use of the lubricant in the video filmed by the bushkraftell channel.

What can be replaced?

Silicone grease is a universal product that does not make sense to replace with other substances. The issue of replacing the product is faced by motorists who, for some reason, cannot buy a lubricant in stores. In such cases, Litol-24 can be used instead of a silicone agent.

How and how to wash silicone grease?

To answer this question, you need to familiarize yourself with the composition of the product. If the lubricant accidentally gets on clothing or glass, do not try to wipe it off immediately. This will lead to the fact that the greasy spot on the surface will only increase. Depending on the composition of the substance, a solvent is selected that will help remove unwanted traces of the liquid.

How to remove traces of silicone grease for rubber seals:

1. If the main element in the base of the substance is acid, then vinegar (70% solution) will be required to neutralize the traces. A clean rag is wetted with vinegar, which is subsequently treated with a contaminated surface. After processing, you must wait at least half an hour. Then the acetic acid is wiped off with a rag.
2. If the product has an alcohol base, then an alcohol solution will be required to remove traces of grease. It can be purchased at a pharmacy. The use of technical or denatured alcohol is allowed. In its absence, you can use vodka. Dampen a rag in the solution, then wipe the surface with it until the cured silicone is removed.
3. The base of the substance can be oximes, amides and amines. In such cases, gasoline, any alcohol-based solvents or white spirit can be used to remove traces of contaminants. To remove silicone, the place is processed, after which you have to wait half an hour. If you could not remove the dirt the first time, then repeat the procedure.

You can learn more about removing silicone from various surfaces, as well as clothes, from the video filmed by the Miss Purity channel.

If you are removing grease with vinegar or acetone, wear rubber gloves. The use of acetone is not always allowed, it all depends on the composition. Be careful, as this product can damage the paintwork on the car body. In some cases, traces of silicone grease can be effectively removed with glass cleaner and ammonia. If necessary, you can use the special Antisilicone tool, but its use is not relevant for all types of lubricants. The best option is to go to a car wash. Experts, after listening to your problem, will select the best silicone stain remover or shampoo.

Advantages and disadvantages

Advantages of silicone grease for seals:

1. Product versatility.
2. Safety from an environmental point of view.
3. Most of the products on the market are characterized by high quality as well as performance.
4. Affordable price for most consumers. It should be noted that the price range of silicone lubricants is quite large. Each consumer will be able to buy a product based on their financial capabilities.
5. Large range of substances. You can purchase products designed specifically for rubber parts or for plastic parts.
6. Water resistance of lubricants. Even when exposed to hot water, high-quality lubricants are not washed off.

Cons are typical for certain types of lubricants. The main disadvantage for many products is the need for regular use. Often, lubricants quickly lose their functions after application, so the car owner has to periodically reuse them.