How to clean film from plastic windows. How to remove film from plastic windows: effective tricks

Many users, faced with the problem of a window film firmly “soldered” with a PVC profile, are in a hurry to experiment, which does not always end well. Especially in the case of colored windows, there is a risk of destroying them. How to effectively and without disastrous consequences remove the old protective film from plastic windows, the WINDOWS MEDIA portal will tell.

All plastic windows come on the market with frames protected by the manufacturer with a self-adhesive film. By law, the protective film should be removed as soon as possible after the installation of the windows is completed - especially when the PVC window is exposed to direct sunlight.

Why is it so difficult to remove the old protective film from PVC windows?

Unfortunately, it happens quite often that due to the negligence of the installers or the user himself, the protective film on the PVC profile can remain even for several years. In this case, when the hands reach the point of putting the new plastic windows in order, the user will be in for an unpleasant surprise - it is almost impossible to remove the protective coating.

It is difficult to remove the old window film from the profile of a plastic window, because it consists of two layers. The outer layer (transparent film) under the action of ultraviolet rays starts to peel off and is relatively easy to clean. But underneath there is a second layer of white plastic with the applied marking - it is he who adheres so strongly to the substrate.

The presence of an old film looks especially bad in the case of a tree-like profile, because usually a protective coating is used white color. Under the influence of UV rays, the film undergoes vulcanization and adheres very firmly to the surface of the PVC window. At the same time, it becomes less durable and breaks easily.

Some try to wash away protective layer gasoline, acetone or other solvents - this helps a little, but in parallel you can remove the wood texture that is applied to the frame lamination (white PVC windows are, of course, insured against this). Experts do not recommend exposing the surface of a colored PVC profile to too much mechanical stress (scraping or sanding), because it is very easy to damage the lamination layer.

Eureka: there is a way to get rid of the old protective film!

Fortunately, there are several ways to get rid of protective film Let's take a look at one of them. This method is simple, effective and, most importantly, will not destroy the plastic window. However, the procedure will take quite a long time and will require the use of a device with a steam cleaning function.

Such a device can be bought without problems, they are often sold in supermarkets. Please note that the package includes a special hose that allows you to fix the nozzle. Versions of this device often appear on the market, in which steam exits directly from the tank through a nozzle. In this case, you will have to constantly hold the heater in your hands during cleaning, but it will soon become clear that heating the film in the lower part of the frame is impossible in this case (the window sill interferes).

Work begins with filling the purifier with water and connecting it to the mains. After a few minutes, you can start heating small area protective film with a jet of steam (hold the nozzle directly over the film or even touch it). Heat up a small piece of 1-2 cm across the entire width. If the window film is already too old and not peeling off, you will need to reheat it (after it has cooled down). At this time, you can heat the protective coating of the window from the other end.

To remove the protective film with steam, shortly after heating a small area, you should try to separate the film from the substrate with your fingernail. This must be done carefully and slowly, across the entire width of the tape. This is the most important point. It is necessary to make sure that a small piece of the film is peeled off across the entire width. Then you can grab the end and slowly (!) tear off the film with parallel heating with steam from above and below (at the points of contact with the substrate).

If the protective film begins to tear and its fragment does not come off, you need to use a fingernail in this place and lead to a situation where it will peel off again over the entire width. After removing a sufficiently long fragment, cut it off with scissors, leaving 2-3 cm so that there is something to catch on to continue further cleaning the PVC profile.

After removing the protective layer on the surface of the window frame remains white coating, which is quite difficult to wash off. And here there is a proven way - you can use a glass cleaner for this purpose (for example, Mr. Muscle).

When buying new plastic windows, do not ignore the advice of the window company, which is clearly stated in the instruction manual, when it is worth removing the protective film from the PVC profile. This will save you both time and money, and save your nerves. In general, compliance with the manufacturer's recommendations, not only in this paragraph, but also in all others, is the key to the impeccable appearance and durability of your plastic windows.

Glad to see everyone on my blog!

After installing plastic windows, not everyone immediately removes the film from them. But in vain!

More than once I had to observe in a recently built house nearby how the tenants rub it wet rags and try to scrape it off with a scraper, because they did not immediately realize that it had to be removed immediately after the purchase.

What can I say, because many people buy apartments after the film has had time to dry tightly.

Therefore, be vigilant, read useful tips on effective cleaning methods and immediately check them in practice.

On the protective films of profiles, manufacturers write that to remove the film from metal-plastic window structures required immediately after installation. But, for a number of reasons, this requirement is often neglected.

The protective coating protects the structure from contamination that inevitably occurs during repair or construction.

For example, the film may be useful in the design of slopes, external insulation of housing, and decorative work.

In such cases, the film adhesive remains on the frames longer and hardens over time. This complicates the process of peeling off the film, and the glue itself sticks to the windows in the form of unaesthetic black spots.

How then to remove the film from plastic windows?

Helpful advice!

This problem can be solved in two stages, successively applying mechanical and chemical methods.

The first will allow you to remove the film itself, while the second will deal directly with the glue.

Accordingly, to achieve the best effect, it is advisable to go through both stages. It is this approach that will allow you to effectively get rid of the problem and avoid scratches on the windows.

So, the protective coating can be safely removed with three tools:

• scraper for cleaning glass-ceramic stoves;
• industrial hair dryer (it is also acceptable to use household high power);
• school eraser.

In the first case, carefully separate the film with the sharp edge of the scraper. Due to the fact that this device is designed for glass-ceramic, the likelihood of scratches on windows is quite low. But you still need to be careful while working.

The second option is considered safer and more reliable. Hot air must be used to heat the glued surface.

It is important not to overdo it so that the film does not melt and stick to the structure tightly. More warm coating removed in one swift motion. If necessary, the edge can be pry off with any sharp object.

Removing the film with an eraser, at first glance, seems to be quite an exotic method. In practice, this method will require a lot of effort from you, but the PVC profile will certainly remain intact.

But to remove the film from plastic windows, the use of one mechanical way not enough.

After the physical separation of the film on window frames remains glue, which is firmly adhered to the structure. If the composition did not have time to dry well, you can do with an ordinary household rag and soapy water.

A well-dampened cloth should vigorously rub the contaminated areas. However, in some cases you will need more powerful tools. So, chemicals COSMOFEN 10 or FENOSOL showed themselves well. They are good because in addition to persistent dirt, they can also remove minor scratches.

You can also use "Nanoflex P-12" - an equipment cleaner. It is worth mentioning that the listed methods of removal protective coating suitable for all elements of window structures. The adhesive composition in them, as a rule, is used the same, which allows the use of the same tools for working with frames, double-glazed windows, window sills, and fittings.

In conclusion, we note that before removing the film from plastic windows, it is necessary to complete all construction works in the opening area. So you can keep an attractive appearance structures for a long time.

Naturally, with the exception of those works after which it will not be possible to physically remove the film.

source: veka.ua

Do we remove the film if we didn’t do it right away?

The frames of metal-plastic windows are protected with a special film in order to protect them from dirt, scratches and other damage during transportation and installation.

Removing the film from metal-plastic windows is extremely simple, if done in a timely manner, i.e. immediately after the windows have been installed.

If for some reason you tightened up with this, then removing the film can be a big problem. According to the instructions, the film must be removed within 10 days after the installation of metal-plastic windows.

If you increase this period to a month or two, then, most likely, nothing terrible will happen. When the film remains on the frames for 3 or more months, it will take a lot of effort to remove it.

Why does such an inconsistency arise? It turns out that the protective film consists of 2 layers and is glued to the frames with a special glue. Under the influence of heat and solar radiation thin the inner layer the film decomposes and tightly sticks to the plastic.

To separate the surface layer of the film is not as difficult as the inner one.

Reasons that increase the adhesion of the film to the frame:

1. The action of ultraviolet rays. Once the film is on the windows that are on shady side building can be removed after a few months, on the sunny side it will begin to soak into the frame in just a few days.
2. Glue quality. The lower the quality of the adhesive that holds the film, the more difficult it will become to tear it off. In the case of installing inexpensive metal-plastic windows, the possibility of encountering bad glue is higher.
3. Heat action. If the windows are installed in winter period, the film will begin to dry to the frame later. In the summer, this happens extremely quickly.

Finally, consider how to remove the film from metal-plastic windows if it was not removed in a timely manner.

• Apply building hair dryer. This is the best remedy to remove the film. The main thing is to direct it to the frame, but not to the glass package, otherwise it has the ability to burst from the temperature difference. The film is heated with hot air, dissolves and is easily removed. The only problem is finding a building hair dryer. Some try to use ordinary, in turbo mode. This can be crowned with triumph only when the film is not quite firmly stuck.
• Contact a cleaning company. The bulk of such firms do a similar service, while they have the devices required for this: a building hair dryer, special scrapers and cleaners. And skill in solving similar difficulties.
• With a professional scraper for cleaning glass-ceramic plates. Such a scraper will not spoil the plastic.
• Slowly, piece by piece, picking up the edge of the film with a thin knife, blade or scraper, and then tearing it off with your hands. Cutting devices should be used as little as possible, trying to separate the film with your fingers.
• Adhesive residues can be washed off with the rough side of a sponge and bathroom detergent.
• weak solvent. When using a solvent, be extremely careful and test in an inconspicuous area first. The solvent has the ability to change the color of the plastic frames.
• Eraser. An ordinary school pencil eraser can help remove the remnants of the film.
• Rough though not wire brushed and soapy water. The method is suitable for film on the shady side.
• white spirit. Although it should not be applied on top, on pieces of film, but between film and plastic. To attain desired result it is necessary to pry off the edge of the film, pour white spirit into this place, wait a little and separate the film.
• "Cosmophen". In companies that install metal-plastic windows, you can purchase a special plastic cleaning agent - Cosmofen. Based on the degree of activity of the active drug, Cosmofen No. 5, Cosmofen No. 10 and Cosmofen No. 20 are distinguished. No. 5 is the most powerful solvent, it dissolves plastic, as a result of this, it must be used with great care. In general, let's say 2 others. These are potent and unsafe means for a person's well-being.

Often the film is not removed because the repair is delayed and you want to protect the window frames from paint, whitewash and other contaminants. This is the wrong approach, which will give rise to even more dilemmas. It is much better to remove the protective film, and if necessary, stick masking tape on the frames. It won't be hard to take it off.

source: stroiportal-dnepr.com

Removing the protective film from PVC windows

We often hear questions like this:

“A year ago, plastic windows were installed in the company ****. All this time, the apartment was being renovated, and my husband and I lived with relatives.

Now, after the repair was completed, they found that the protective film that is glued to the plastic does not tear off. That is, the film that was inside the apartment came off normally, but from the side of the street it is held tightly.

How can I try to remove the film from the window? Is there any remedy?"

I have to disappoint you, I do not know of such means that can help you with 100% probability. After installing the window, the protective film must be removed immediately, otherwise it is destroyed in the sun under the influence of ultraviolet radiation and fuses into the plastic.

Note!

The protective film must be removed immediately, otherwise it is destroyed in the sun and melted into the plastic.

Manufacturers of plastic windows even write warnings on this film, but usually in a foreign language. In our practice, there was a case when we installed windows for the whole house for customers, and the profile from which the windows were welded lay for a long time on the street under the sun.

We were not able to remove the film from these windows, and the problem arose, of course, after all the windows were installed. As a result, we had to completely replace all the windows with new ones.

But sometimes, special cleaners can help to remove the film. We have Cosmofen plastic cleaner for sale. A very serious thing to say. Distributed specifically for window companies.

There are 3 brands of Kosmofen: Kosmofen No. 5, Kosmofen No. 10 and Kosmofen No. 20, they differ in the degree of dissolution of PVC plastic.

So Kosmofen No. 20 does not dissolve plastic at all, Kosmofen No. 10 is a weak solvent for PVC and Kosmofen No. 5 is the strongest solvent.

I think that if Cosmofen does not help you, then nothing will help you. The only way out it is either to change the windows, or to spit and forget, thank God the film is on the street and is not visible from the apartment.

source: www.okna-lider.com

How to remove film from windows after installing them

When installing plastic windows, always remember that it is necessary to remove the protective film that trims the profile for safety purposes immediately after the windows are in place and that's it. Finishing work finished.

However, real situations indicate that consumers often order PVC windows from one company of such well-known brands as KBE, PROPLEX, Veka or the eminent Rehau, and they are installed independently or with the help of other contractor companies.

In such situations, everyone completely forgets to remove the notorious protective film on the profile, which, under the influence of sunlight, sticks to the window so strongly that it is almost impossible to remove it.

In which case, it will be possible to make claims about the quality of the work performed, and its employees will be required to take care of removing the film from the outside of the profile.

On the windows, the film prevents scratches, both during their installation and during installation. Experts in this field recommend getting rid of such a harmful film within 10 days after the windows have been exposed to the sun.

If time is lost and the protective layer has not been removed, do not be self-willed, but listen to useful tips, proven by time and practice. Many make a gross mistake when trying to remove the film with a solvent. So the film will remain on the windows, and the profile can be hopelessly damaged.

Proceed with extreme caution, as high heat the entire profile may be damaged.

Not less than effective tool when removing the film from the window, there will also be the use of a special scraper used during cleaning hobs and ceramic tiles.

You can safely work with a scraper, because it does not damage the plastic surface.

Try very carefully to pick up the edges of the adhered film with a scraper and remove it piece by piece from the window. If possible, work only with your fingers, as even a safe scraper can leave scratches on the PVC profile.

When finished, thoroughly wipe off the remaining adhesive with warm soapy water. If the glue cannot be cleaned with soapy water, then use the special Cosmofen 10 cleaner.

It is important that it not only removes adhesive residue from the film, but also largely masks the resulting small cracks. From improvised means, an ordinary eraser from the school desk helps well, it perfectly rolls up the remnants of glue, helps to achieve the desired results.

All of the above tips are time-tested and give positive results with careful handling of all devices.

But if you conclude a contract for the production, supply and installation of plastic windows with one organization (which is the best option), then make sure that they take care of removing the film from the window as well.

Plastic windows are quite often equipped with various films that are needed to protect from the sun, make the glass more durable, and decorate. When buying an apartment, windows can be covered with such films, but they are not always needed by the new owner. In addition, if it is time to update the windows, since the films tend to become unusable, the question arises of how to remove the sun protection film from the window.

Coating removal methods

You can remove the sun protection film from the glass different ways by choosing the most convenient and affordable. This is done both mechanically and with the help of various detergents, they also use a combined approach in order to clean well.

The film can be quite useful: it has a small thickness, while making the window much stronger, it can no longer be broken with a simple stone. Exist different types films that help protect the double-glazed window even from strong impact, such as a shot; they are classified as protective. It will not work to remove a perforated film from glass or any other type of protective or tinting variety from the outside: an attacker will not do this, since the process takes a lot of time, effort, and attracts the attention of others. Most films are pasted with inside except for the protective one.

Knowing how to remove the film from the window glass may be required, if desired, to replace it when updating the interior, replacing a double-glazed window. Sometimes the product loses its visual appeal and needs to be updated, or the owners of the premises want to change its illumination, make the room lighter or darker. The process of removing the film is simple, does not require hiring a specialist, but it is worth considering that you will have to spend a sufficient amount of time and effort on this. You need to work carefully: in the process it is easy to damage the glass, scratch it, especially if you remove the film with hard materials such as a spatula or a coarse brush.

What should you do when you need to remove the film from the window?

When choosing a method, means, option for cleaning glass, the owners of the premises proceed from several parameters:

• It is necessary not to harm the glass.
• Spend as little time as possible on this.
• The option should be inexpensive.
• There should be no traces of glue, film residues, various contaminants on the glass.

The easiest option than to clean the glass from solar control film- This is a spatula and fingers. Some types can be gently pry off by tearing off the edge, but this does not always work out due to the fact that the film is glued unevenly, in some places it is damaged and exfoliates.

It is quite difficult to remove the adhesive from the film from the glass. It is poorly removed by detergents, does not lend itself to mechanical action. In order to remove it, you can use white spirit or another alcohol-containing substance that can gently clean the surface. Do not use rags with coarse pile, as they can leave marks visible in the sun on the glass.

Understand , how to delete old film from plastic windows, it may be required if it is damaged, if you want to change the appearance of the window, renew the old coating that has deteriorated.

What are the methods for dismantling?

Removal methods can be divided into two - mechanical and chemical. The first allows you to remove the film from plastic windows without much money, but with the risk of scratching the glass. The second will take longer, cost more, but with the right tools, you can thoroughly clean the surface without harming it. For greater efficiency, the methods are best combined: first you need to cut off all the swollen, cracked or otherwise deteriorated film.

You can remove the film from plastic windows with your hands, then get rid of the glue with the help of substances such as COSMOFEN 10, FENOSOL. These detergents have more cheap analogue, which you can buy at a hardware store: it's called P-12.

It will be much easier to remove the protective film from plastic windows if you heat it up with a building hair dryer before peeling it off. The heated glue becomes more viscous and allows parts of the structure to be peeled off. However, the glue itself is best removed when it cools down a bit.

You should try to heat the surface evenly: the better you do it, the easier it will be to remove the self-adhesive film from the glass and the remnants of its glue. The latter will not be easy to remove, you will need to use a solvent, a scraper and detergents. You need to act carefully, otherwise you can scratch the glass. A steam generator can help with this. With it, you can remove the stained glass film from the glass , get rid of the tinting or protective film, glue residue. If you don’t have a steam generator or a powerful hair dryer at hand, you should not try to heat it up with an iron. So the film will not be removed, but it will partially stick to the surface of the iron, which can spoil it to a large extent, and after cooling it will not be easy to tear it off the iron.

You can remove the self-adhesive film from the glass, if it is well warmed up, using a hard eraser for artists. The remains of the eraser are removed from the window easily. To do this, you need a dry sponge or rag. If there is glue left, you can apply the eraser again or use a solvent. In most hardware stores there is something to remove the film from the glass.

Before removing the film from the glass, you need to carefully study all the methods, purchase suitable detergents and tools with which you can clean the surface.

At first glance, removing film from window panes may seem like a simple task. Understanding the opposite comes when you take up this work.
At best, spend your strength and nerves, but you can ruin the window. This article will help you avoid all this.

The first way. How to remove the film from the window glass using soaking

It will help if the film was attached to the glass with a water-soluble adhesive.
Prepare the canvas, such that it is in size on each side window glass folded over two inches.
Soak it in a solution of any dish or window cleaner, such as Fairy, Drop, Sort.
Moisten the film on the window with a cleaning solution from a spray bottle.
Press firmly against the glass. Wait about an hour. In general, the longer it is on the glass, the easier it will be to tear off the film. Just do not forget to constantly moisten the canvas, it should always remain wet.
With a fingernail (instead of it, you can use any sharp object, a toothpick, for example), carefully pick up the film from above and tear off two centimeters from the glass. On the formed line where the film sticks to the glass, apply a singing solution. The remaining canvas must also be moistened.
Wait five or ten minutes.
Carefully separate, starting from the corner, the film from the glass. Do this smoothly, carefully so that the film does not tear. At the same time, do not forget to moisten the remaining densely.
If you have an assistant, then have him apply the cleaning solution to the fabric peel line at this time.
Do work intermittently so that the solution applied by the assistant is absorbed as much as possible.
Pieces of film that have not peeled off, most likely you will still have them. Remove them with a construction or stationery scraper.
Clean the window with any window cleaner you have.
Job is done.

Method two. How to remove film from window glass using a hair dryer

This is a more risky method. Sunscreen film is specially made so that it does its job perfectly in the hottest weather. summer days. Therefore, it will have to heat up to 50-100 degrees. A normal hair dryer is not capable of this. You need to use a builder. Glass can not withstand and burst. (And this is just before winter).
First, warm up the window with a hair dryer. The device must be kept 10-15 cm from the glass and not directed to one area for a long time.
For five seconds, direct a stream of air from a hair dryer to the upper corner of the glass. Unhook the corner of the film from the window and start slowly, carefully, so as not to tear, to separate it. If you are with an assistant, then let one of you work as a hair dryer, while the other separates the film, keeping it in a taut, tense state. The hair dryer should be 5-19 centimeters from the glass, depending on the temperature of the jet. Due to overheating, the film may deform and begin to stretch with threads.
When the film is removed, it is necessary to wash the window.

Method three. Household chemicals

The method is not easy, but, according to reviews and own experience, the most efficient. Unless, of course, choose the right solvent.
It’s good if you can find out from the manufacturer of the film what he recommends for removing it. However, this does not always work out, especially if the manufacturer, for example, is from China.
You'll have to experiment on your own.
Peel off some of the film from the glass. Add a few drops of solvent with a pipette. Wait two or three minutes. If the film began to peel off and you saw a rainbow strip between it and the glass, then the solvent is working.
Be sure to check that the solvent does not damage the PVC profile. To do this, soak a cotton swab in the solvent and press it in an inconspicuous place to the profile. If the threads of the fleece stick to it, then use something else to peel the film from the window.
Especially protect the seals from the action of any solvent. If the solvent does get on it, wipe it off immediately.

What solvents to use

You can use 646 or 647, Cosmofen, Domax, Cosmofen, Fenosol. Specifically, Shumanit helped me.
Remember that solvents are very toxic substances, work with open windows, in rubber gloves and a respirator. Be sure to take the children out of the room, take out the aquarium, and remove the pets.
I don’t write how to remove the sun-protection film with a scraper or a melamine sponge. I tried to get rid of the film in this way - it did not help. Maybe someone else has a different experience though. Use only a special scraper designed for glass-ceramics, as usual, with such work, the profile is easy to scratch.

In contact with

The owners of plastic windows are often faced with the question of how to wash the protective film. Of course, it is much easier to remove it immediately after installing the window, but often, the owners do not immediately peel it off or completely forget about it.

However, there comes a time when the protective material will still have to be removed. Then the question arises, how to remove the dried film from plastic windows?

Naturally, it is important not to damage the window during this process, and you also want to do everything as soon as possible and without any extra effort. What can be done in such a case? Effective Ways exist, which means they can be safely used.

But in order to successfully remove the protective film, you must first understand the essence of the problem in more detail. Then it will be much easier to solve it.

Causes of Hard Film Adhesion

Why do you need a film on metal-plastic profiles? Companies through its gluing ensure the integrity of the product during transportation and installation. On the one hand, it is good that such protection is pasted on plastic windows. However, as ordinary people then get rid of it? When the product is already in place and the protective layer is no longer needed.

Very often, windows are changed during a complete renovation of an apartment or house. This means that after installing window PVC profiles a thin film coating remains for some time, until the repair is complete, and dries.

After a few weeks, the film adheres more strongly to the plastic and practically merges with it. Dealing with dried up protective material is no longer easy.

Why does protective tape stick more strongly over time:

1. Unscrupulous window manufacturers usually save on some nuances. Their range just includes glue, which is used to glue the protective material. There is such an unusual pattern, the lower the quality of the adhesive used, the stronger it attaches the film to the window. In this case, there are only two options, it is either to remove the film layer immediately after installing the metal-plastic product, or to choose the manufacturer more carefully.
2. The time of year, oddly enough, also greatly affects the adhesiveness of the protective tape. In winter and autumn, for example, the frame is cold, the glue seems to curl up and the adhesion of the film to is minimized. If outside the window is a warm season, then the stickiness increases, and it becomes difficult to clean the profile.
3. If you have sunny side, then we can say with confidence that already a week after the installation of the PVC window, the film will stick strongly if it is not immediately removed. The fact is that under the influence of constant heating from sunlight, the protective tape, as it were, dissolves, connects with adhesive mixture and strongly adheres to plastic. And then it dries up. Therefore, draw your own conclusions, and it is better to immediately tear off the tapes from the frames.

These are the main reasons why the film protective layer can be difficult to remove even a month after installation. The whole essence is hidden in the adhesive composition. He must be fought with.

How to remove the protective film from plastic windows correctly? There are several ways. Choose individually the most suitable for you.

Mechanical Elimination Techniques

There are only two such ways. These are the most effective and proven methods.

Let's take a closer look at them:

1. Scraper application. If you have a question, how to remove adhesive tape then a scraper will help. AT winter time of course, it is better not to use this method, since the adhesive remains dense, and it will be difficult to scrape off the protective layer without damaging the plastic. But in the summer, this the best option, the protective coating should be removed well and quickly. The scraper is able to effectively cope with the melted adhesive composition on frames and double-glazed windows. Depending on the length of stay of the tape on the windows, it can be removed in different ways, in small parts or in large segments.
2. Stationery tape. How to tear off PVC film? Very easy with duct tape. The bottom line is that, as already mentioned, the adhesive protective paper is very thin, so it can not be easy to remove it with a continuous tape. Here an ordinary wide adhesive tape will come to the rescue. It is denser, and therefore stronger, than window tape, that's the whole point. All you need to do is simply stick the tape tightly on top of the film, and then tear it off along with it. Thin ribbons can be easily removed and remain on the tape strip.

All other methods are based on chemical exposure. But there is also a heating technique, which is also considered good and uncomplicated. However, it also has its own nuances.

Removal by heating

How to remove film from plastic windows? If you have a building hair dryer at home, then it can be used to quick removal old protective film plastic window. You can also try using a household steam generator. The main point is to melt the adhesive layer between the film and the window surface, so that the tape will come off more freely.

The following points must be taken into account:

• you shouldn’t heat it too much, as the ribbon can melt, then the task will only become more complicated;
• after warming up, be sure to first let the window cool down;
• do not rush, otherwise the tape will be removed unevenly;
• you can not keep the hair dryer too close;
• hot air must not be directed towards plastic profile but on glass.

If you follow all the recommendations and perform the procedure correctly, then tearing off the sticky protective paper will not be difficult. It will be enough just to pry off the edge of the tape with a knife or scraper, and then remove the coating in a continuous piece without interruption.

Chemical removal method

You can also remove the film from plastic windows using chemistry. The basis of such methods for removing a protective coating from profiles are chemicals. They are able to dissolve sticky material, which then will be easily peeled off, and then it can simply be washed off.

So, you can use the following cleaning products:

• Shumanite;
• Anti-scotch;
• Mellerud;
• LABEL OFF;
• composition of RP-6;
• composition of WD-40.

All these tools will come to the rescue to peel off old stickers, adhesive tape and wash off adhesive stains from PVC windows, as well as help to clean old paint. They are perfectly capable of scrubbing the protective tapes on the profiles, while not damaging the plastic surface at all.

If after removing the film there are still traces of glue, then they should be completely wiped off so that dust does not stick. You can use white spirit or acetone to remove them. And also try to clean the stains with a clerical eraser.

Removal of the sun protection layer

Another fairly common question, which concerns not only plastic, but also wooden products, this is how to remove the sun protection film from the window? Is it possible to rip it off at all? Yes, of course it's real. However, any kind of strong solvents are inappropriate to remove the film. How to wash the glass in this case? An ordinary knife and a soapy solution will suffice, or you can use Shumanit.

It should be said right away that removing sun protection will not be so easy. But if you spend some time and make an effort, then everything will work out.

How to clean film from glass? It is advisable to slightly warm the surface of the glass with a hair dryer before starting work. Next, carefully wipe the window with soapy water and proceed to remove the coating. The glue will gradually dissolve, and the protective canvas, tearing off, will have to be carefully pry off with a scraper.

Finally, the double-glazed window and frame washes from the sun-protection film store remedy for washing glasses. If scratches were found on the plastic after the work done, then Cosmofen will come to the rescue. However, before using it, you should carefully study the instructions.

Here are some simple ways to clean the film on the windows. The main thing is to do everything slowly and carefully. Then the result will be excellent, and there will definitely be no traces or defects left.