Which slime is better. Salt and soap

In the late 90s of the twentieth century, the cartoon "Ghostbusters" was released. The most interesting hero was Lizun - a pretty green ghost. It was small, but very gluttonous.

The viewer liked Lizun so much that he became the prototype of an interesting toy, which both children and adults are delighted with. The toy has become very popular, and many craftsmen already know how to make a slime at home.

During fun with a slime, the vestibular apparatus, fine motor skills and motor activity develop well. This will help small toy owners in development, and adults in warming up.

Playing with a slime is fun, but you need to remember to throw it on a surface that is painted water-based paint, or on any other non-washable surface. It leaves a greasy trail.

You can not only play with a toy, but also grow it, and even multiply it. Slimes can get pregnant. Their "pregnancy" looks like a bubble a few millimeters inside. In order for reproduction to be successful, the slime must be removed to a dark place until a descendant appears.

Easy Slime Making Recipe

One of the simplest and easiest recipes is to make toys from water and starch. To do this, you need to take the ingredients in the same amount and mix. Color can be given with brilliant green, food coloring or gouache. Before you make a slime from water and starch, you should think again - the ease of manufacture affects its appearance and jumping ability.

temporary toy

Before you make a soda slime, you need to pay attention to the fact that it loses its plasticity after 3 days, but you can make it very quickly. Such a toy is good if the child quickly gets bored with everything. Lizun from soda will not have time to get bored, but if the children do not have time to play enough of them, it can be quickly rebuilt.

How to make slime from soda? Prepare first necessary materials and utensils. For manufacturing you will need:

• capacity (you can use the bottom of a plastic bottle);
• stirring stick;
• Cup;
• soda - 1 tbsp. l.;
• water - 100 g;
• glue (preferably PVA) - 50 g;
• dye.

The glue is mixed with half the water. The mixture should be homogeneous and thick. The color resembles milk or cream. In order for the toy to turn out to be colored, a dye is added. It is better to take food coloring - so the slime will turn out to be translucent. Separately, in a glass, dilute soda in the rest of the water. Pour the soda solution into the color adhesive mixture and mix well. After the substance begins to thicken, it is removed from the container and checked how soft it is. The toy is ready, and now it can be used for its intended purpose.

Toy made of water and borax

Many people ask the question “How to create a dense toy, what components will be needed?” So how do you make a slime? Sodium tetraborate for its manufacture will need a little, and you can find it in almost any pharmacy. Making a toy at home with your own hands is not difficult if you have the following components:

• sodium tetraborate or, as it is also called, borax (you can buy it at a pharmacy without a prescription, you will need a powder or solution of 4%);
• PVA glue - it is important that it is not dried;
• water room temperature- a little more than a glass;
• dye - food coloring, brilliant green or gouache;
• mixing bowl and stick.

The same amount of PVA glue is poured into a quarter cup of water at room temperature. Then you need to add dye. Gently stirring, introduce sodium tetraborate. The solution will need half a cup. If powder is used for preparation, then first 1 tablespoon of the component is dissolved in water.

Slime without dye

You can make a toy without using dye. How? Make slime out of shampoo. The color will be the same as the shampoo.

For cooking you will need:

1. Glue "Titan" (300 g) - you can buy it in hardware stores.
2. Shampoo (200 g) - you can use cheap shampoo, it is not necessary to take an expensive one.

The ingredients are thoroughly mixed until the substance reaches the desired consistency.

Making a toy in this way is very simple and fast, besides, it has good view and comfortable while playing. Before making a slime from shampoo, select its color. Get creative - add glitter!

alcohol slime

A beautiful and interesting toy is obtained from alcohol and borax. To create it you will need:

• polyvinyl alcohol (sold in powder form);
• borax or borax;
• dye;
• water.

To begin with, alcohol powder is mixed with water and put on fire. Boil a solution of polyvinyl alcohol for 45 minutes over low heat. While the alcohol is brewing, it should be constantly stirred so that it does not burn.

When the alcohol is ready, you need to put it to cool to room temperature. In the meantime, you can work on the rest of the components. Borax is dissolved in water. For a glass of water, you need 1-2 tablespoons of the powder. The crystals should dissolve well in water.

Now you can mix polyvinyl alcohol and borax solution. They are combined in a ratio of 3 to 1 - 1 part of the borax solution is taken for 3 parts of alcohol.

Lizun from plasticine

How to make a slime without glue? One of the solutions will be this way. You will need edible gelatin, plasticine and water. You need to mix 1 tablespoon of gelatin with a glass of water. Bring gelatin and water to a boil and set aside.

The disadvantage of such a slime is that it is not very elastic and has a specific smell of plasticine.

A simple starch option

Before making a slime from water, starch and glue, prepare all the ingredients and fixtures. You will need:

• water;
• liquid starch (not food, but the one with which things are bleached);
• glue;
• dye;
• sachet.

First, water and glue are mixed. Liquid starch and dye for color are added to them. Everything is mixed well and sent in a plastic bag. In the bag, the whole mixture mixes well. Water may remain during cooking. It's not scary. A well-mixed slime must be removed from the package, after which it will flow around and be ready for play. By the way, this recipe is good for someone who is looking for how to make slime without sodium.

edible slime

For those with a sweet tooth, there is an edible slime recipe. To prepare it, you will need the following ingredients:

• condensed milk - 1 can of 400 grams;
• corn starch - 1 tablespoon;
• food coloring.

The cooking process begins with the fact that the condensed milk is poured into a saucepan. Corn starch is added to it. A saucepan with condensed milk and starch is put on fire. The mixture is boiled, stirring constantly.

When the milk with starch thickens, it is removed from the heat. Food coloring is added to the mixture. The amount of dye depends on how saturated color you need to get (about 10-15 drops).

After this, the slime must be cooled. Now you can play with it or eat it. If the slime was prepared for food, it is not worth decorating it with sparkles or other inedible materials.

How to decorate slime

Making a slime with your own hands is a great pleasure, and if it is beautiful and not like everyone else, the child will also be proud of his abilities.

You can decorate it by adding glitter, small beads and various figures of various sizes, shapes and colors to the mass during cooking. Give personality and the use of several colors.

Before making a slime from water and other materials, think over its appearance and start cooking. Decoration ideas may come to mind during its creation, embody them!

In addition to appearance, the toy may also smell differently. To do this, add a few drops of perfume or essential oils to it. Fantasize and embody these fantasies by making a toy. Making a slime at home is not just about using template recipes. This is the embodiment of their creative ideas.

How to prolong the life of a toy

1. It is better to store the "ghost" in a box or jar, you can use a regular plastic bag if there is no suitable place.
2. Protect slime from sunlight and heat. It is better to store it in a dark and cool place.
3. Lizun does not like to lie idle. The more they play with him, the longer he will live.
4. You can not wash a homemade slime. It can lose its properties and deteriorate.

Liquid slime and its recovery

Liquid slime, or chewing gum for hands, easily stretches over the entire hand, like a glove. In addition, such a slime can be poured. If you know how to make a slime out of water and baking soda or starch, it won't be difficult. You just need to experiment with consistency.

An already hardened toy is also renewed with water. To do this, water is introduced gently drop by drop and knead the slime well. Only the one that contains water can be restored in this way.

Before you do homemade slime, you need to consider that the toy may not work the first time. But this is not at all a reason to be upset.

Experiment with the components and their quantity and you will definitely succeed! Of course, you can buy a ready-made toy, but playing with your own work is much more interesting.

Cool toy for children - "Lizun" or "Slime". Did you know it's easier than ever. In this article, we will analyze the easiest ways to make a homemade handgum or slime yourself, and now a slime. But first we will tell (maybe someone does not know yet) what kind of miracle this is.

Immediately Video:

Surely you have seen or even purchased such an unusual jelly “bad” for your child. It can still stretch and stretch, take any shape and not stick to your hands. In the common people, this toy is called a "lizun", but in fact (where it came from - from the States) its name is in English "handgum" (handgum). It is not difficult to guess - "hand" (hand), and "gum" (chewing gum).

And today you can often hear - how to make Slime? What is slime and what is it for? From English "Slime" is a children's toy made of jelly-like material, pleasant to the touch, able to stretch and assemble back to its original state.

Again, the same slime in a simple way! Slimers can make such a sticky jelly from any material with their own hands and improvised means (although for some you still have to go to a store or pharmacy).

And now let's start making slime at home.

How to make slime (slime) at home without sodium tetraborate

There are several simple ways or recipes for making boron-free slime (sodium tetraborate) at home. It's safe for your kids!

The easiest way - from water and starch without glue at all

All we need is starch and water. Mix both ingredients together in equal proportions or 2 parts water and 3 parts starch. And we get our homemade slime. For a firmer consistency, you need to add more starch. And in order for it to become bright - a dye.

You need to understand that such a toy will not be quite the one that we often see. But still, the kids will be happy. And use only warm water.

Slime made from starch and PVA glue

In this case, we need PVA glue and the freshest one is better. Separately, mix water and starch, then add dye (you can use sparkles with essential oils). Mix thoroughly without lumps. Lastly, pour in the glue. For convenience, use a bag instead of a container.

Ingredients: PVA glue - 50 mg, water - 100 mg, starch (you can use soda) - 1 tablespoon, dye ("brilliant green", gouache, food coloring).

The same can be done with baking soda used in the kitchen. That is, instead of starch with water, mix soda.

From shampoo and glue "Titan"

This time we take high-quality, not expired glue "Titan". You can find it at any hardware store.

Take a bag and pour two parts of shampoo (absolutely any) and three parts of glue into it. It is worth shaking a little until completely mixed and thickened, and the slime is ready. To make the toy look more beautiful, pour a little dye and glitter into the shampoo before glue.

How to make a slime (slime) at home - a store option

To make a slime at home, as in a store, we need an additional (main) ingredient - sodium tetraborate (both a liquid solution and a dry powder are suitable).

Essential elements:

• PVA glue - 100 grams,
• 1 vial of sodium tetraborate (4%) or if the dry version - mix 1 tablespoon of the powder with half a glass of water,
• dye for color option.

- Instead of tetraborate, you can use Borax powder, which is available for free purchase in pharmacies.

Manufacturing:

• take a suitable container and pour glue into it (than more glue, the larger the toy),
• carefully add the dye (do not overdo it, otherwise the slime will get dirty), mix until smooth,
• slowly pour in the boron solution (so that the slime does not stick to your hands and is not liquid, you can add borax more than it should be), mix thoroughly and we get a jelly mass,
• then, in order to remove excess moisture, it is worth blotting with a napkin (and for the future, when the child plays, it is best to put the handgam on paper - this way less lint and debris stick to it)
• and the last - put the resulting clot in a bag and crumple for 3-5 minutes, and now it's time to play with it.

• Do not use when making cold liquid(water or shampoo)
• Try not to put it on products with pile (including cats and dogs),
• Homemade slime, although safe, is not recommended to eat and put in your mouth,
• To make it smell delicious, mix it with essential oils,
• The sparkles inside the slime look very nice,
• Choose a new adhesive base, and not lying somewhere on a shelf,
• Store in a closed container and in a cool place
• But even if the homemade slime is a little dry, place it in warm water.

And finally, another DIY slime recipe - It's just a bomb!

Shaving foam slime - aquamarine

• Pour 125 mg glue into a separate container. Required condition- it should be thick and of good quality.
• Add some emerald acrylic paint. Stir and get a thick dark mass.
• It's time to lighten it - add shaving foam, a lot of foam. Gently mix the foam with the colored mass. Reminds me of ice cream or sweet cream.
• Pour some water and 15 grams of boric acid into the jar, and a couple of drops of hand soap.
• Stir with a wooden stick and the thickener is ready. Pour the mixture into the colored foam and stir again.
• It turns out a real slime with your own hands.

Well, now, while we were typesetting this article, someone tested and made a slime at home with maximum performance.

The best and correct slime made by hand

• Pour, again, as in the previous one, thick transparent glue - 125 milligrams.
• Add hot pink acrylic paint. Stir until a uniform color.
• Add a little bit of contact lens fluid and mix. In total, we poured about 10 grams.
• Pour half a teaspoon or a large pinch of soda. As you knead, the mass begins to thicken and stretch. Great, she's completely behind the walls.
• Next, knead with your hands until it stops sticking to your palms.
• It turned out a cool soft and elastic slime. It does not stick, does not tear and stretches perfectly. It's great to play with him and you don't even want to let go of it. Reminds me of a huge pink chewing gum.

Probably one of the best recipes we've tried. Stretches into a thin film. You can blow bubbles out of it - that's how elastic it is.

Video how to make a cool slime (slime) without glue and thickener

Enough to watch everything, it's time to start manufacturing, so that everything turns out Cool and with a bang!

Lizun or "gum for hands" is an unusual plastic toy that changes its shape, which you can easily make yourself at home. How to do it? In our article, you can learn some simple ways to prepare slime.

Shampoo and salt

Making a slime out of shampoo and salt is pretty easy. For this you will need the following components:

• thick shampoo - 4-5 tsp;
• salt - 1 tsp

Put shampoo and salt in a small container. Then mix thoroughly and set aside refrigerator compartment for 15-20 minutes. Such a “gum for hands” will be somewhat different from the store version due to its greater ductility and stickiness.

Polish for hair

Hair sprays have in their composition a special substance - polyvinyl acetate, which forms a film on the surface of the hair, due to which it turns out to preserve their volume. You can make your own slime from any hairspray. Take:

• hairspray - 20-25 sprays;
• PVA glue - 95 g;
• gouache or acrylic paint - 1-2 drops.

Pour PVA glue into a bowl and start injecting hairspray, stirring the mixture constantly. After the future slime begins to thicken, add gouache or acrylic paint to add color. Continue stirring until a homogeneous mass is obtained.

Plasticine

For the preparation of "manual chewing gum" from plasticine, the following ingredients are needed:

• transparent glue - 250 ml;
• soft plasticine - 15-20 g;
• boiling water - 300 ml.

Take a small bowl, put half a teaspoon of sodium tetraborate into it and pour boiling water over it, mix thoroughly until the "borax" is completely dissolved. Allow some time for the mixture to cool. Prepare a second container for mixing plasticine and transparent glue until smooth. Then mix all the ingredients completely until the stickiness of the composition to the hands disappears. Such a slime should turn out to be quite viscous.

PVA glue

Oddly enough, but PVA glue can help in such an interesting activity as making slime. Ingredients:

• PVA glue - 100 g;
• acrylic paint (any shade) - 1 tbsp;
• water - 200 ml;
• contact lens care liquid - 1 tsp;
• baking soda- 1 tbsp

Pour PVA glue into a small plastic container and mix it with water. Gradually add acrylic paint - as a result, you should get a liquid of even shade. Now take another container and pour water into it and pour baking soda - mix thoroughly until sodium bicarbonate is completely dissolved. Mix the contents of the two containers together until a thick mass is formed.

Sodium tetraborate

Sodium tetraborate is the sodium salt of boric acid, widely used in industrial productions. From this substance, it is quite simple to prepare a slime. The following ingredients are required:

• cold water - 250 ml;
• PVA glue - 100 g;
• sodium tetraborate (borax) - ½ tsp;
• gouache - 2 tsp;
• glycerin - 2-3 drops.

Pour water and PVA glue into a shallow bowl - mix thoroughly. Then add a little gouache (color at your discretion), half a teaspoon of sodium tetraborate, glycerin - mix until a homogeneous consistency is obtained. Place the mixture in the refrigerator for 15 minutes.

Shaving foam and PVA glue

Slime can even be made from ordinary shaving foam. Take the following:

• shaving foam - 200 ml;
• PVA glue - 100 g;
• water - 200 ml;
• sodium tetraborate - ½ tsp;
• gouache paints - 50 g.

Put the "borax" into a plate with high sides or a bowl and pour in water, mix thoroughly until the tetraborate is completely dissolved. Then add shaving foam, PVA glue and paints. Mix all the ingredients again. The result should be a soft lump that will stick to your hands, so to get rid of stickiness, you need to crush it in your hand for several minutes, and then put it in the refrigerator for 10-15 minutes.

Starch

You can also make your own “gum for hands” using starch. Components:

• starch - 100 g;
• PVA glue - 100 g;
• water - ½ cup;
• food coloring or acrylic paints -50 g.

Pour half a glass of water into a shallow bowl, add starch, stirring it thoroughly until completely dissolved. Then add food coloring or acrylic paints (color of your choice). Allow the resulting mixture to cool slightly by placing it in the refrigerator. Transfer the starch to a bag or plastic bag and mix with PVA glue. Shake the contents of the bag well until a homogeneous mass is formed.

Toothpaste

There are 2 ways to prepare slime based on toothpaste. Let's look at each of them in more detail.

On the water

You need to take the following ingredients:

• toothpaste - 100 g;
• water - 200 ml.

Squeeze out into a bowl toothpaste. Boil water in a small saucepan over medium heat. Place bowl of pasta on water bath and cook for 15-20 minutes. Don't forget to stir constantly. As a result of the above manipulations, a dry mixture should be obtained, which must be put to cool for a while. Grease your hands olive oil and start kneading the cooked mass. You will get a viscous and elastic slime.

In the microwave oven

To make a slime in the microwave based on toothpaste, you will need:

• toothpaste - 100 g;
• cosmetic oil (for example, for hair or face) - 10 ml.

Squeeze the toothpaste into a shallow dish intended for microwave ovens. Let it warm up in the microwave for 2-3 minutes. Then remove the plate, mix the pasta thoroughly and send it back to bask for another 3 minutes. As a result of all the manipulations, you should get a dry mixture. Apply cosmetic oil to the future slime and knead it properly in your hands.

Dishwashing liquid

Making "gum for hands" from detergent is very simple. Ingredients:

• dishwashing detergent - 100 ml;
• baking soda - 2 tablespoons;
• hand cream - 1 tsp;
• acrylic paint - 1-2 drops.

in container small size lay out detergent, then add some baking soda, hand cream, and acrylic paint - mix the contents very thoroughly. The mixture should be thick enough. Put the resulting mass in the refrigerator for 2-3 hours.

Flour

To make a flour-based slime, you need the following ingredients:

• wheat flour - 100 g;
• hot water - 100 ml;
• cold water - 100 ml;
• acrylic paint - 1-2 drops.

Sift wheat flour with a sieve into a shallow container. Add to it first cold water, and then hot (in no case use boiling water) and dye. Stir the contents of the dish properly. Place the mixture in the refrigerator for 2-3 hours.

Air freshener

Do " hand chewing gum» from an air freshener is possible, but only with the help of additional components:

• PVA glue - 100 g;
• air freshener - 20-30 sprays;
• sodium tetraborate - ½ tsp

Pour PVA glue into a shallow dish and add air freshener to it - mix thoroughly. Then pour in half a teaspoon of sodium tetraborate and mix everything well again. Let the resulting mixture brew in the refrigerator for 10 minutes.

Nail polish

As the main component of the slime, you can use ordinary nail polish. Take:

• nail polish - 3-4 drops;
• PVA glue - 100 g;
• water - 100 ml;
• sodium tetraborate - ½ tsp

First, mix cosmetic varnish and PVA glue. Then add some water and half a teaspoon of sodium tetraborate. Mix all ingredients thoroughly. Place the resulting mixture in the refrigerator for 10 minutes.

Gelatin

You can prepare a slime without using PVA glue. For this you will need:

• plasticine - 100 g;
• gelatin - 50 g;
• water - 100 ml.

Add gelatin to water and stir until completely dissolved. Then let it brew for 1-2 hours. Boil over low heat for 2-3 minutes. In a separate container, mix plasticine with water and gelatin. Knead the mixture well in your hands until a homogeneous mass is obtained.

Chocolate spread «Nutella»

Slime made from Nutella chocolate spread is edible. It consists of:

• pasta "Nutella" - 4-5 tablespoons;
• marshmallow "Marshmallow" - 10-15 pcs.

Melt the marshmallows in the microwave. Add Nutella Chocolate Paste to it. Mix thoroughly - it will take enough time, but the result is worth it. When ready, you can eat the resulting slime by spreading it on bread or cookies.

Sweets "Frutella"

To prepare an edible slime, you will need the following ingredients:

• sweets "Frutella" - 6-7 pcs.;
• powdered sugar - 100 g;
• water - 300 ml.

Melt the sweets in a water bath. Let cool. Add powdered sugar and roll the resulting mixture in your hands until it loses its stickiness.

silicate glue

"Gum for hands" from silicate glue will be completely transparent. For its manufacture you need:

• silicate glue - 100 g;
• water - 250 ml;
• sodium tetraborate - ½ tsp

Pour 250 ml of water into a small bowl and add sodium tetraborate - mix until the "borax" is completely dissolved. Then squeeze out the silicate glue and mix all the ingredients together thoroughly.

Salt and soap

Let's look at another unusual recipe for making homemade slime. Take the following:

• liquid soap - 100 ml;
• salt - 1 tsp;
• acrylic paints or food coloring - 1-2 drops.

Pour 100 ml liquid soap in a container, then add salt and dye to it. Mix thoroughly. Place in refrigerator for 15 minutes.

metal shavings

The recipe for making slime from metal shavings is considered unique, as it is magnetic. Ingredients:

• metal shavings - 100 g;
• PVA glue - 100 g;
• boric acid - 1 tsp

In a shallow container, mix iron shavings, PVA glue and boric acid. Stir until the mass is thick enough. Then take a magnet and bring it to the slime - it should stretch out.

polyvinyl alcohol

Polyvinyl alcohol or PVA is often used to make slime as an ingredient that replaces PVA glue. Ingredients:

• polyvinyl alcohol - 3-4 tbsp.
• "Bura" - 1 tsp;
• food coloring or gouache - 1-2 drops;
• warm water - 200 ml;
• medical bandage - 30 cm.

Dilute alcohol in water and then simmer for 30 minutes. In a small bowl, dissolve "borax" in water, pass through a bandage to remove excess fluid. Mix sodium tetraborate with PVA and gouache. Put in plastic bag and remember with your hands. Place the slime in the refrigerator for 15 minutes.

Baking soda and glycerin

Prepare the following ingredients:

• baking soda - 100 g;
• glycerin - 2-3 drops;
• sodium tetraborate - ½ tsp;
• PVA glue - 100 g;
• dye - 1-2 drops;
• water - 200 ml.

Heat the water without boiling. Add sodium tetraborate, glycerin, PVA glue and dye to it. Mix all the above ingredients thoroughly until a homogeneous mass is formed.

Hydrogen peroxide

To make a slime based on hydrogen peroxide, you will need:

• hydrogen peroxide - 1 tbsp;
• PVA glue - 100 g;
• water -100 ml;
• dye - 1-2 drops;
• baking soda - 100 g.

Water

You will need the following components:

• water - 200 ml;
• baking soda - 100 g;
• dye - 1-2 drops;
• shower gel - 2 tbsp.

Dissolve baking soda in water. Add a couple of drops of dye, as well as 2 tablespoons of shower gel. Mix all ingredients thoroughly. Put the resulting mass to solidify in the refrigerator for 20 minutes.

In a separate container, mix baking soda with water. Add dye and PVA glue - mix again. At the very end, pour in hydrogen peroxide to give the mass airiness. The slime will become like foam.

Glue stick

You will need the following ingredients:

• glue stick - 1 pc.;
• dye - 1-2 drops;
• sodium tetraborate - ½ tsp;
• water - 100 ml.

Remove the glue from the plastic shell, put in a special dish to warm up in the microwave oven for 2-3 minutes. Add dye, water and sodium tetraborate to the glue - mix thoroughly. Put the resulting mass in the refrigerator for 5-10 minutes.

In our article, you met with the most interesting and unique recipes making slime toys at home. All of the above ingredients are safe as long as you follow the rules for working with chemicals.

Lizun is a kind of chewing gum for hands (handgam), which is now experiencing the second peak of its popularity. This toy has the ability to take any shape, it can be twisted and wrinkled, tossed and deformed, glued to different surfaces and without effort to peel off from them, you can even glue (only for a short time) with its help some parts.

Slime has the consistency of jelly, but it is not able to melt. The toy helps in the development of fine motor skills, stress relief and calming nervous system generally.

You can buy handgam in the toy store, appearance all models are almost the same. However, their quality can vary quite a lot. Often, cheap Chinese slimes are created from low-quality, and sometimes frankly harmful substances. That is why parents who care about the safety of their children most often create such toys on their own. Moreover, the ingredients necessary for this can be found in every home.

How to make a slime from liquid silicate glue

Silicate glue is a common material from which most handgams are made. Make a slime with my own hands it is possible like this:

• mix in a separate container one part of glue (silicate or clerical, for example, pva) and one part of medical alcohol;
• add a little coloring matter to this consistency (food coloring is suitable for this purpose, which are absolutely safe for children's hands);
• after all the ingredients are mixed, you need to hold this mixture under a stream of ice water, waiting for the slime to harden.

This method of making sticky toys does not require high costs materials and time, but it is used quite rarely, due to the fact that alcohol is used in the recipe.

How to make a "glass" or transparent slime

You can create a glass slime that is completely transparent without special efforts. To do this, you need to prepare sodium tetraborate (all known borax) and ordinary liquid transparent glue (silicate).

The process of creating a transparent handgam looks like this:

• in a glass container, mix one part of glue and sodium tetraborate;
• mix the composition thoroughly with a plastic spatula;
• after a minute, the glass slime will be ready.

Making slime from water

Making a slime “like in a store” is quite easy, for this you need PVA glue (office glue), water and a little time.

Technology for creating water slime:

• pour 50 ml of slightly warm water into a glass bowl clean water and 100 gr. PVA glue (it is important that its expiration date is not expired);
• the mixture must be thoroughly stirred, in case it turned out to be watery, you need to add a certain amount of glue;
• now you need to pour 1 vial of sodium tetraborate (4% solution) into this composition;
• if borax is purchased, which is in a powdered state, it must be diluted with water (in the proportion of 1 tablespoon per 0.5 cup of water);
• it is important to monitor the amount of borax and not to exceed its amount, otherwise the slime will be too hard and less plastic;
• in conclusion, any dye must be added to the composition, it can be either a food or an ordinary solution of brilliant green.

Upon completion of the process of creating a slime, it must be put in plastic bag and knead thoroughly. Important! After playing with such a handgam, you should definitely wash your hands.

How to make slime from soda

Some believe that tetraborate is not needed in children's toys, and resort to making slimes without borax. It perfectly replaces ordinary baking soda. Moreover, from soda you can make both a transparent handsome man and a multi-colored slime (if you add a dye).

Creating such a handgam is easy:

• first you need to dilute 100 ml of glue in 50 ml of water;
• with help wooden stick add a little coloring matter to this liquid;
• the composition must be stirred until complete dissolution and combination of all ingredients;
• now you need to mix 150 gr. soda and 15 ml of water;
• add this mixture to the color composition;
• now the mass needs to be transferred to a plastic bag, shaken and kneaded thoroughly - from these manipulations the slime will gradually thicken and become elastic.

Just a minute of exposure and your own handgam is ready! Note! Such a slime should only be stored in a closed jar or bag, otherwise it will dry out and lose elasticity.

We sculpt a slime from plasticine

A homemade slime is very easy to create from plasticine, which is in every children's room.

It is prepared like this:

• The handgam manufacturing process is quite dynamic, so you need to prepare all the necessary ingredients in advance: plasticine (a strip of standard set or 100 gr.); food gelatin - 15–20 gr.; glass of water; container - glass or plastic for mixing all parts and metal for heating gelatin; slime spatula.
• Gelatin should be poured with water in a metal bowl and allowed to swell for 1 hour.
• Now you need to heat the swollen gelatin over low heat, without bringing it to a boil.
• Separately stretch the plasticine so that it becomes very soft and takes over body heat.
• In a plastic bowl, pour 50 ml of mashed plasticine hot water and mix this mixture thoroughly with a spatula.
• Now it remains to carefully mix the slightly cooled gelatin and plasticine mixed with water.
• In conclusion, the slime must be removed in the refrigerator and left in it for half an hour, after which it can be played with.

How to make slime from shampoo

Very interesting recipe making a slime involves the use of shampoo, which is sure to be found in every apartment. There are several options for creating such a handgam:

• Shuffle in plastic container the same amount of hair shampoo, baking soda and water. You can add any dye or leave the slime white. You need to store it in a cellophane bag.
• You can combine shampoo and water with flour to get a thicker toy consistency. Important: knead the composition for warm water, and add the dye before the flour.
• Often, starch is used instead of flour, which allows you to sculpt beautiful sticky crocodiles or create your own dolphin.

Note! Slimes that contain flour are quite sticky and have an unpleasant ability to leave greasy spots on the light wallpaper, which are not easy to wash.

How to make slime from liquid laundry detergent

Young inventors came up with the idea of ​​using liquid laundry detergent to make slimes. Moreover, ordinary washing powder or dishwashing liquid, in this case, will not have the desired effect, and it is unlikely that a high-quality slime will be obtained.

To create such a handgam you need:

• mix in a container ¼ part of a standard tube of PVA glue with food coloring;
• achieve a uniform consistency and color by thorough mixing;
• add to this composition no more than 2 tbsp. l. liquid agent for washing;
• mix the resulting mixture;
• if the composition is very thick, you need to slowly, literally drop by drop, add liquid washing powder to it until it acquires the desired consistency;
• now you need to gently knead the entire composition for 5-10 minutes (it is better to wear rubber gloves);
• the finished slime is stored only in a container that is hermetically sealed.

If some of its properties are lost over time, you can put handgam in the refrigerator for a while.

How to make a DIY magnetic slime

It is very interesting to play with a slime, which tends to be attracted to a magnet. To do this, do the following:

• Mix a glass of water and half a teaspoon of borax and glycerin in a bowl until smooth.
• Separately, you need to mix 150 ml of water and 30 gr. glue, gradually adding to them not a large number of coloring matter. You can make the handgum luminous, for this at this stage you need to add a small amount of phosphor paint to it.
• Now you need to mix both mixtures, gradually adding one to the other. It is important to carry out this process slowly, as soon as the desired density of the composition is reached, tetraborate will no longer need to be poured.
• After you need to carefully roll out a layer of slime on flat surface and pour some iron oxide into the middle.
• Now the composition is again kneaded until a uniform shade is obtained.

How to make slime from flour

Lizun, which contains flour, is considered quite safe for children. However, in any case, you need to watch the children's games, because even the safest composition can choke.

You can make slime from flour like this:

• sift through a sieve 2 cups of flour;
• add ¼ part of ice water to the flour;
• now pour ¼ of the hot water into the container;
• the mixture must be mixed well, allowing the flour to stick everything together so that there is not a single lump in it;
• finally, pour in a little food coloring and stir the composition again;
• in conclusion, the slime is left for 2 hours in the refrigerator until it cools completely.

Slime from nail polish

Very interesting Velcro is obtained from nail polish, it is not too difficult to prepare them:

• Pour any nail polish into a glass container.
• Add a little to it vegetable oil, thoroughly and for a long time mix everything.
• Now, using rubber gloves, you need to get the dye out of the container, which, thanks to the oil, has strayed into the middle. It must be gently kneaded by hand.
• Slime is ready. You can put it in the refrigerator for half an hour to increase elasticity.

The main disadvantage of such handgam is bad smell acetone, which is inherent in every nail polish. Therefore, it is hardly suitable for the games of young children.

How to make an edible Nutella slime

This toy is sure to please every child. It can be made quickly and easily. For this you need:

• melt in a water bath 100 gr. marshmallows or chewing marshmallows;
• the melted mass will turn out sticky and viscous;
• now you need to add Nutella chocolate paste to this mass, it is better to do this gradually, in small portions;
• when the composition is slightly mixed, it must be picked up and kneaded for 5 minutes, achieving uniformity in color and consistency.

You can play with such a slime a little, and then, with no less pleasure, enjoy it with tea.

How to wash a slime

Such a toy is quite sticky in its consistency, so it is not surprising that everything quickly sticks to it, including dirt. It becomes simply unpleasant and uninteresting to play with such a handgam, because having collected garbage on itself, it simply stops sticking and stretches well. You can fix this problem by washing the Velcro, in addition, you need to properly clean it:

• You can rinse it in a container with water and put it in a closed bowl in the refrigerator for a while.
• Often a syringe is used, into which you need to draw a slime and slowly squeeze it out. All debris, at the same time, is collected in the nozzle of the syringe.

A handmade handgum becomes truly dear to a child, and keeping it intact becomes a top priority. In order for the toy to please the baby for as long as possible, you need to adhere to the following rules:

• Keep the slime only in closed containers or tetra-packs, preventing it from drying out and dust.
• Do not use soap to wash toys.
• Do not leave handgams near heating appliances(batteries, solar window sills).
• The child should not leave the toy on surfaces that have pile (carpets, blankets, fur), otherwise he will definitely collect his particles on himself.
• If the slime has stopped stretching well, you can add a few drops of vinegar or a little glycerin to it.

Slime is a versatile toy that is easy to make with your own hands at home. It will allow the child not only to have a great time, but also to develop fine motor skills hands, which is very important for a growing person.