How to clean the bath to white from a strong plaque at home? How to clean and whiten a bath at home with soda, peroxide, citric acid? How to bleach enamel, acrylic and cast iron bath.

Ways to clean the bathroom from rust, limescale and yellowness.

A clean bathroom is an indicator of the cleanliness of the hostess of the house. This is one of the most frequently visited places where a lot of mold, dust and soap deposits accumulate. In places where the bathroom comes into contact with a faucet or drain, rust and scale often form.

How to clean a bathtub from rust?

Rust often eats into the surface of a metal bath and is difficult to remove. Many housewives solve this issue by purchasing expensive cleaning products. But, unfortunately, they also do not always cope with the problem perfectly.

Bathroom Cleaning Instructions:

• Take a glass jar and rinse it. Remove moisture and pour in 100 ml ammonia
• Add 50 ml of hydrogen peroxide to the substance and stir
• Saturate the fabric with the composition and rub the dirt
• You can pour some of the solution on the rust and leave for 20 minutes
• Rinse with warm water, repeat if necessary

Rust is iron oxide, which is removed using acids and alkalis. It dissolves perfectly with ammonia, vinegar and special aggressive agents.

How to whiten a bath from yellowness?

Many housewives regularly use this method to clean sinks and bathrooms. The method is based on the use of wine vinegar and salt.

Instructions for removing yellowness:

• Mix in a glass bowl 100 ml of wine vinegar and 50 g of salt
• Put the dish in the microwave and heat the solution to a temperature of 70 ° C
• Dampen a cloth with liquid and rub the contaminated areas. Leave for 30 minutes
• Do not overexpose the solution, as it can damage the enamel

How to whiten an enamelled bath?

Such products are best cleaned with acid-containing solutions. In order for the product to work perfectly, it is necessary to warm the bathroom. Just fill it with hot water, drain it and wipe dry.

Only then apply the cleanser. Enamel should not be rubbed with abrasives and a metal scraper. From this, it can become covered with cracks. Dirt and mold often clog in these cracks.

Enamel whitening instructions:

• Heat up the item. It reinforces chemical reaction and cleanup is faster
• Pour concentrated vinegar or essence onto dirty areas
• Oxalic acid does an excellent job of removing dirt, but you should not apply it for a long time.
• Leave on for 15 minutes and rinse thoroughly with warm water

How to clean an acrylic bath at home?

Do not use abrasive compounds and powders to clean acrylic bathtubs. They scratch polymers and spoil the product. It is recommended to use compositions such as "Silit", "Domestos", "Cif". Substances with a high content of chlorine (Whiteness) should not be left for a long time, as they are absorbed into the pores of the polymer and cause it to turn yellow.

Cleaning instructions acrylic bath citric acid:

• Dissolve a spoonful of the substance in a glass hot water
• Saturate the cloth with the solution and apply to the dirt. You can wipe the entire surface of the bathroom
• Rinse with warm water
• You can use special plastic bathtubs, this is Ryton, Eago, Ravak, Delfin

How to whiten a cast iron bath?

A cast iron bath can be cleaned with soda and abrasives. It is recommended to clean with liquid chlorine. Don't rub metal surface scraper, it destroys the coating.

Instructions for cleaning a cast iron bath:

• Rinse the item very hot water or boiling water
• Wipe with a dry cloth or towel
• Pour in some Whiteness or liquid chlorine. You can buy Domestos with chlorine or Hedgehog
• Leave on for 15 minutes and then rinse with warm water

How and how to clean the bath with folk remedies?

There are many ways to clean a bathroom from rust and limescale. Of course, it is desirable not to use techniques that destroy the enamel.

Bathroom cleaning options folk remedies:

• Mix salt with vinegar and heat. Apply the solution to the surface. Wash off with water
• Mix borax with ammonia and apply to rust or dirt. Wash everything off after 15 minutes.
• Pour citric acid on the wetted surface and leave for 20 minutes. Wash the surface

How to clean an acrylic bathtub with vinegar?

Acrylic is a kind of material that requires careful maintenance. On its surface there is an antibacterial film that protects the container from the appearance of mold and bacteria. It is not necessary to use whiteness and aggressive substances for cleaning. Use proven and safe methods.

Instructions for cleaning acrylic with vinegar:

• Rinse with hot water, wipe dry
• Dissolve 20 g of salt in 100 ml of vinegar and put in the microwave. The temperature will speed up the process and you will get rid of the dirt faster.
• Pour the solution into the bathroom and leave for 20 minutes
• Wipe with a damp cloth and wash with water

How to clean the bath at home with baking soda?

Heat the tub with warm water and wipe dry. Mix baking soda with soda ash and apply to a damp bath. Leave the baking soda on and let the paste dry. Pour vinegar into a glass and pour it over the surface. Vinegar and soda will enter into a chemical reaction and the dirt will disappear.

You can use this way:

• Mix baking soda with water until you get a paste
• Apply the paste on the surface and leave for 20 minutes
• Scrub the surface with a sponge and rinse thoroughly

How to clean the bath with citric acid?

This method is used to clean cast iron and acrylic baths from limescale and rust.

Cleaning instruction:

• Moisten contaminated areas with warm water
• Pour in citric acid. It will adhere to a wet surface, forming a concentrated solution
• Leave for 25 minutes
• Wipe with a clean cloth and rinse

How to clean a bathtub with hydrogen peroxide?

Hydrogen peroxide is commonly used to clean bathroom stains. It is a weak acid that corrodes dirt. At the same time, the solution does not smell of anything and is completely safe for health, unlike chemicals.

Cleaning instruction:

• Mix ammonia and peroxide in a ratio of 2 to 1
• Apply the prepared solution to a warm and dry surface.
• Leave for 30 minutes
• If the bathroom is very dirty, you can leave a cloth soaked in the prepared solution on the surface.

As you can see, cleaning the bathroom from rust and yellowness is quite simple. It takes a little time and effort.

VIDEO: Cleaning the bathroom

The bath is often exposed to various pollution. In addition to the untidy appearance of plumbing, rust, limescale can become a source of a large number of bacteria, as well as the cause of an unpleasant odor. Traces are left by children's toys, shampoos and other products left on the sides.

Therefore, many housewives are interested in the question of how to clean the bath at home. Today, fortunately, stores household chemicals can please us with an abundance of various detergents, which will not only help wash a dirty bath from plaque, but also remove rust and other contaminants.

Before you start looking for a way to help wash the bath to white, you need to figure it out with the causes of stains and other stains.

• Soap stain. The result of using various shampoos, bath products and ordinary soap is the appearance of a film on the surface of the water in the bathroom. It is not always possible to remove it with a simple rinse. This film eats into the surface of plumbing, and it is already impossible to do without detergents.
• lime plaque formed from water of high hardness. This is the most common bathroom problem.
• rust causes tap water with a high iron content.
• If the bath turned yellow, the reason for this was the old pipes, which are not always well washed.
• usually accumulates in tile joints between parts, window slopes, ceiling. This fungus is very dangerous to health, therefore.
• colored spots may be the result of careless handling of hair dye, spilled or spilled potassium permanganate solution, brilliant green and other substances.
• Pollution from ongoing repairs. The bath is very prone to various stains, dust easily sits on it. Therefore, when carrying out repair work it must be protected with a film or other materials.

At old bath the enamel is full of cracks, into which any dirt easily penetrates.

Main types of pollution

To clean the bath from rust at home will help the following means.

• Ammonium chloride. It is applied to the spots for a few minutes and washed off with water.
• Lemon juice. The method is the same as with ammonia.
• Cooking surface treatment salt and table vinegar.

Rust can also be cleaned with soda ash (sodium carbonate). It is sold in any household chemical stores. The procedure will be as follows.

1. Mix two types of soda (calcined and food) in equal proportions.
2. Add water to obtain a homogeneous mushy consistency.
3. Sponge or brush evenly distribute the composition over the surface of the product.
4. Table vinegar and bleach in powder granules are also combined in equal amounts.
5. Apply this mixture to baking soda.
6. Wait 30 minutes and wash well clean water.

Rust can also be treated with alcohol and hydrogen peroxide. These components are mixed in the following proportion: one part of alcohol and two parts of peroxide. The sponge is dipped in the solution and all dirty areas are covered with liquid. Washed with water after 20 minutes. Here's how alcohol and peroxide can clean up rust without leaving a trace.

limescale

It is washed off if you clean the bath soda and vinegar.

• baking soda mix with calcined, apply on the surface of the product, leave for 30 minutes. After that, rub a little and rinse with water.
• Paper towels are moistened in vinegar, which cover the entire inner surface baths. After 5 hours, the towels are removed, and the product is washed with water.

How else can you wash the bath from yellow plaque? Help out citric acid. 100 g of the product is dissolved in 400 ml of water. All yellow areas on the bathroom are covered with this product with a sponge.

Within two hours, the coating is repeated at intervals of 10-15 minutes. Then rinse well with water. The procedure is quite tedious, but it will perfectly help to wash the bath from yellowness.

It often forms in places where the bathroom is adjacent to the wall. Its cleaning is possible activated carbon. Coal is mixed with whiteness to a mushy consistency and the composition is distributed over mold fungus. Wash off with water after an hour.

Another effective way is using soda. How to clean the bath with baking soda from mold? Very simple. It is applied to the problem area in a rather thick layer, then poured abundantly with table vinegar. After the end of the reaction, everything is thoroughly washed off with water.

Ways for different types of baths

How to wash an acrylic bath?

An acrylic bathtub requires careful, gentle handling and the same cleansing. Care should become regular, consisting in rinsing after each use of the product using gentle means.

It is forbidden to use:

• products containing alkalis and acids. They are detrimental to acrylic;
• solutions containing alcohol;
• bleaches with chlorine and other products containing this substance.

Wash an acrylic bathtub from limescale with a weak solution of washing powder. If the surface of the product is not damaged, then this method will perfectly cope with the task.

An acrylic bath at home is washed from rust and other deposits with table vinegar (which is preheated) and salt. An alternative could be a mixture of the same table salt and turpentine. The same products will help wash the acrylic bath from yellowness.

Because this cleaning method is quite aggressive, test it on an inconspicuous area before cleaning your acrylic bathtub with it. Otherwise, plumbing may deteriorate.

The enamel bath has upper layer, which is quite thin. Therefore, in this case, all methods of rough cleaning are contraindicated. At home, you can use hydrogen peroxide, ammonia, proven soda and vinegar.

Rust is removed with porridge from water and soda, which is applied to the stain, kept for about one hour and washed off well with water. Whiten the surface of soda ash with the addition of food. Limescale will remove ammonia and fresh lemon juice.

You can also clean the enamelled bath with mustard. It will not only wash off dirt, but also disinfect the surface with high quality.

How to clean an old cast iron bath?

Such plumbing products are characteristic of old houses. The technology for the production of cast-iron bathtubs was based on the addition of zirconium salts to the material from which they were made. It is because of them that yellowed spots form after contact with water.

Wash the cast-iron bath from yellowness with table vinegar. Pour a full bath of water and add 200 ml of essence to it. Leave for 3-4 hours, rinse well with water. This versatile cleaning liquid has repeatedly helped housewives in different situations, making ordinary household cleaning more efficient and effective.

Wash the bath from rust will help good way based on soda liquid soap. From these components, a slurry is prepared, which is rubbed with rust and its streaks.

Ammonia will help out from very old stains. It should be added to 0.5 cups of liquid soap and spread over the surface of the bathroom. After this procedure, the bath will become shiny again. If you know how to clean the ancient cast iron bath, then you do not have to change the product to a new one, and it will last more than one year.

Removal of other types of contaminants

These two components are the most common types of pollution in the bathroom. Even a weakly concentrated solution of manganese will leave dark marks on the surface of the product.

A drop of brilliant green solution will also add color.

Manganese is washed with a solution of hydrogen peroxide and lemon (or fresh lemon juice), they will not only quickly discolor the stains that have appeared, but will make the bath shine.

We remove the greenery with alcohol. However, if the surface of the plumbing is made of acrylic, then alcohol may be powerless before contamination.

How to wash the bath after repair?

In order not to have to deal with its consequences on a soiled bathroom upon completion of the repair work, the product must be protected from getting building materials. If something goes wrong, you can use by the following means.

• Any solvent (for example, white spirit) will help to wash the bath of paint. It is important to work quickly so that the paint does not have time to soak into the surface.
• Rinse off dusty deposits with warm water, then clean with citric acid.

How to wash the sealant from the bath?

Sealant is another type of bathroom contaminant. It is used to ensure the reliability of joints and seams. Sooner or later the question arises.

In this case, you can use folk methods with the use of table salt, but it is better to buy professional tools especially for such cases.

How to clean an old bath?

If the bath is far from being the first year, then pollution appears on it very quickly. They penetrate into all microcracks that have formed on the surface over time.

Not all cleansers can easily return to her original view. Better, of course, to replace the plumbing. But if this is not possible, then soda ash will help. The procedure for working with it was described above.

Cleaning chrome surfaces

Faucets above the bath, shower hoses require no less attention than the plumbing product itself. Limescale and rust also appear there - the first enemies of bathrooms. Faucets, handles on the bathroom and other elements are covered with chrome.

From the chrome surface, the universal baking soda, which is applied to the products, will clean the rust. You can also use table vinegar or tooth powder. All components are evenly distributed over the objects with a sponge or soft cloth. Maintained in this state chrome parts about half an hour, then washed with water.

There are many ways to answer the question of how to wash the bath from various contaminants. Follow the above rules and recommendations, and your bath will shine. But it's better not to wait general cleaning, and take care of the product regularly, then you do not have to spend time and effort on removing significant old stains.

Mother of two children. I'm leading household for more than 7 years - this is my main job. I like to experiment, I constantly try various means, methods, techniques that can make our life easier, more modern, richer. I love my family.

05/14/2017 2 30 155 views

Over time, the question: how to clean the bath from yellow plaque at home, becomes more and more relevant. Many surfaces suffer from this problem, and even the high price and, it would seem, do not always save high quality materials.

First of all, water is to blame for the appearance of a yellow coating. Sooner or later low quality water, which may include various impurities and even chlorine, will leave its mark on the surface of the bath. The second reason for the appearance of plaque is insufficient care. The bath should be washed regularly and only specialized products should be used for this.

Preparing the bath for cleaning

Before you start cleaning the bath, you need to find out what it is made of, so as not to make an irreparable mistake.

1. It is the material of manufacture that is very important in the choice of cleaning products. What works for one bath may not work for another.
2. In no case should brushes with hard bristles, namely metal ones, be used. Small cracks that remain after such cleaning will lead to the appearance of larger ones in the future. Even if you manage to clean the bathtub white in this way, then most likely, in the end you will shorten its service life. The process of destruction of the coating will be started.
3. It is not recommended to use cleaners containing sebaceous acids, especially if the bath is made of acrylic.
4. Be sure to rinse the surface with warm water after each bath to wash off traces of soap and shampoo.

How to wash a cast iron bath?

In old apartments that have not been renovated for a long time, you can find a cast-iron bath. Previously, they were used everywhere, and until now, many families prefer this particular material. The old cast-iron bathtubs were distinguished by the fact that over time, dirt clogged into the cracks that formed. Now they are made from modern materials which made them more practical. Cast iron bathtubs of the latest generation are covered special composition, which is not afraid of temperature changes and, therefore, the appearance of cracks can be avoided.

In a household chemical store, you can purchase any oxygen-containing agent to clean a cast-iron bath from stubborn dirt. However, many compositions can be prepared at home, which will significantly save the family budget.

Special Powders

To clean the cast-iron bath from yellowness, you can use ordinary laundry powder.

• a small amount of powder is applied to the surface of the bath;
• with a brush dipped in water, the applied powder is brought to a state of foam and left in this state for 15-20 minutes;
• after the time has elapsed, the applied composition is washed off with warm water;
• if there is on the surface heavy pollution you can remove them with a brush.

Soda ash mixed with food

A mixture of soda, ash and food copes well with yellowness on the surface of the bath.

1. In a small container, two bulk substances are mixed in equal proportions.
2. The bath is doused with thermal water to moisten the surface.
3. Sprinkle the top with baking soda mixture.
4. Half an hour after application, the surface of the bath is treated with a solution of vinegar and bleach and left for 50 minutes.
5. After the time has elapsed, the composition is washed off with warm water.
6. To make the surface shine, it must be thoroughly wiped with a woolen cloth.

Ammonia

You can get rid of traces of yellowness if you prepare the following cleaning solution.

• in a container, mix one tablespoon of baking soda and one teaspoon of ammonia;
• using a sponge or brush, apply the prepared mixture to the entire surface of the bath and leave for half an hour;
• when the allotted time is over, wash off the applied solution with warm water.

With the help of this prepared solution, even heavily stubborn dirt can be washed off.

Soda with bleach

Strong and old traces of yellowness can be easily removed with the following solution:

1. In a small container, baking soda and any bleach are mixed in equal proportions.
2. The prepared solution is applied to the surface and left for 40-50 minutes.
3. After the time has elapsed, the mixture is removed with a jet warm water. Additional manipulations are not required, since all the dirt easily leaves itself.

How to clean a steel bath?

Steel bathtubs are lighter than cast iron bathtubs, but they retain heat worse and cool faster. The surface also does not tolerate aggressive manipulation, so you can forget about brushes with iron bristles. You can remove traces of yellowness from the surface with various solutions that are easy to prepare at home.

liquid detergents

Withdraw yellow footprints from a steel bath, you can use various detergents. The main condition is the absence of aggressive components in the composition. Slight pollution can even be washed with dish detergent.

• the substance is applied to the surface of the bath, foamed with a sponge and left for half an hour;
• after the allotted time, the product is washed off with warm water.

Slightly ingrained pollution can be removed by quite ordinary means, it is not necessary to use strong chemistry for this.

soda

You can remove traces of water and rust with the help of soda, and both ordinary food and calcined ones equally well cope with the task.

1. Soda is applied to the wet surface of the bath.
2. A few minutes after application, it can be washed off with warm water, as it begins to act very quickly.

If there are old contaminants on the surface of the bath, then the soda exposure time can be increased to 15-20 minutes, after which it must be washed off with water.

ammonia

Effectively removes traces of yellowness and rust solution of ammonia.

1. one teaspoon of ammonia is added to a glass of water;
2. the solution is applied to the surface of the bath with a sponge or a clean cloth;
3. after 10-15 minutes it can be washed off. Additionally, the bath does not need to be cleaned with anything, traces of contamination are quickly removed with a solution.

What to use when cleaning an enamel bath?

The most popular bathtub model has an enamel coating. They, as a rule, serve well and for a long time, are not afraid high temperatures and easy and quick to clean. It is for this great list positive qualities many families choose them.

An enameled bathtub does not tolerate cleaning with coarse brushes, and special aerosols can be found in the home improvement store that will extend the life of the surface. If serious dirt has appeared on the bath, then in order to wipe it off, it is recommended to use non-hard sponges.

But the tool with which you can clean the surface, you can cook at home.

baking soda

Traces of yellowness are well removed from the surface of an enamelled bath with soda.

1. The bath is pre-drenched with warm water.
2. Baking soda is applied on top and left for 10-15 minutes.
3. After the allotted time, the soda is washed off with warm water.
4. If the desired result was not achieved the first time, the procedure can be repeated.

citric acid

To remove contaminants, you can use a concentrated solution of citric acid.

• bulk substance dissolves in water;
• using a sponge, apply to the surface of the bath and leave for 20-30 minutes;
• when the time is up, the surface is additionally wiped with a sponge, after which the solution is washed off with warm water.

One procedure, as a rule, is enough to return the bath to its former appearance.

A solution of laundry soap with ammonia

If your favorite bath has stubborn yellow marks, you can prepare the following cleaning solution to remove them.

1. Laundry soap is rubbed into a glass of clean water and thoroughly stirred until completely dissolved.
2. 4-5 drops of ammonia are added to the liquid and everything is mixed.
3. With a sponge dipped in the prepared solution, walk over the entire surface of the bath, Special attention focusing on heavily polluted areas.
4. After 15 minutes after application, the bath is bathed in warm water.

Additional manipulations are not required, as the dirt is easily washed off with the solution.

Detergent plumbing products

You can use the same products for cleaning the bathtub as for the sink and cooker. It is desirable that it has a gel consistency. The agent is applied to the surface of the bath and left for 15-20 minutes. After the time has elapsed, especially contaminated areas should be wiped with a sponge in order to achieve maximum results. Finally, the product is washed off with warm water.

How to clean an acrylic bath?

When choosing an acrylic bathtub, you should remember that caring for them is the most difficult. It will not be possible to use hard brushes, aggressive chemicals and abrasives to clean them. Failure to follow the recommendations will lead to the fact that the bath will become unusable.

What is strictly prohibited?

Acrylic bathtub is very demanding to maintain. In order not to lead to the fact that it will have to be replaced, you should remember once and for all what products should not be used to clean it:

1. Ammonia.
2. Acetone.
3. Formaldehydes.
4. chlorine-containing substances.
5. abrasive substances.

At the same time, if you decide to give preference to an acrylic bath, it is better to immediately choose the most durable model. So, on the market you can find two types of bathtubs: with acrylic coating and made of acrylic sheets. The former are very prone to cracking, so caring for them becomes a whole problem. While the latter is much stronger.

chemical solution

If on an acrylic bath appeared yellow stains, then there is no need to experiment. To clean them, it is best to use specialized tools:

• Acrylan is a chemical product specially designed for cleaning acrylic bathtubs. Its soft composition does not damage the delicate surface and allows the bath to last as long as possible. You can buy this product at any household chemicals store;
• bass is a cleaner for acrylic surfaces. Great for both bath and shower cleaning.
• hyphae is a universal bathroom cleaner, suitable for acrylic surfaces.

An important condition for the use chemicals is that it must be washed off especially carefully and only with warm water.

In order for the bathtub to always look like new, be sure to treat it with a special polishing compound after cleaning.

Video: how to clean the bath from yellow plaque at home?

acid solution

You can return the original appearance of an acrylic bath not only with the help of special chemicals, but also folk recipes. Acetic solution removes any yellowness well.

1. In a small container, prepare a weak vinegar solution.
2. Fill the bath with warm water and pour the solution into it.
3. Leave in this form for 12 hours, then drain the water and rinse thoroughly with running water.
4. Once the solution is removed, wipe the surface dry with a soft cloth.

If your family has Small child, then an antiseptic solution can be added to the liquid to further disinfect the bath.

The bathroom is the place where we spend a lot of time and we want it to be always clean and comfortable. It does not matter what material your bathtub is made of, it is important to clean it properly and regularly. You can only use products suitable for a particular surface and should not experiment.

The tips above will help keep appearance baths on long years, provided they are met. Don't forget about simple rules use of the bathroom. Do not leave it unattended for a long time and make sure that the room has good ventilation.

It is important to remember that even if the selected bath model is not too expensive, it is not at all necessary that in a year or two it will become unusable. If you follow all the recommendations of the manufacturer, then it will serve the family for many years.

Most effective ways for cleaning the bath from yellowness at home

Snow-white plumbing gives the bathroom a cozy and even festive look. How to clean the bath at home? After all, unfortunately, the original whiteness fades very quickly. Often we use the bath not only for its intended purpose, but also for other purposes: washing, washing large items, bathing animals, and so on. How to clean old bath and how to whiten the surface so that it shines with its former purity? To do this, there are many household chemicals sold in stores, and you can also resort to the help of simple compounds that are always at hand - soda, acetic acid and the like.

But before you start cleaning the surface of stubborn dirt, you need to determine the type of pollution. Some cleaning products are suitable for almost all problems, while others are used only for certain types of plaque - for example, lime.

The surface of the bath becomes dirty for various reasons. We present the main ones.

• Simple raid. This is the kind of dirt that forms when washing. It consists of skin particles and skin secretions mixed with a soapy solution. It is very easy to clean the surface from such a plaque - it is enough to wash it off with hot water with a sponge every time after bathing.
• A touch of soap. The compounds found in soaps, shampoos and shower gels form over time gray coating, eating into the surface of the enamel. Get rid of him simple means fail.
• If your area has hard water, then salts from it will be deposited on the surface of all plumbing. White or yellowish crumbling plaque will have to be removed using special products containing acids that dissolve calcium compounds.
• Rust . Appears due to the increased content of iron in the water. Also applies to hard-to-remove contaminants.
• Old enamel. Old bathtubs are difficult to clean, as their surface is covered with small cracks, which eat into various contaminants.
• yellowing on enamel settles if there are old ones in the house water pipes, from which come various oxides and water biofilms.
• Specific pollution. This includes paint, other products that have fallen on the surface of the bath after repair, mold. It is necessary to fight them with the help of special means (solvents, antifungal solutions).

How to clean a bath?

How to wash the bath so as not to damage the surface? Immediately make a reservation that all of the above applies to steel and cast iron products with enamel finish. We will talk about how to clean acrylic plumbing below.

Starting to clean the bath with your own hands, use the following tips.

• When choosing a product, be guided by the degree of surface contamination. If the bath is cleaned regularly, use weak solutions and gentle cleaners, gel ones are best. But old dirt and yellowness will have to be removed with strong acids that can damage the enamel. Therefore, strictly maintain the required time and rinse well with water.
• Don't forget about protective equipment. Even the most harmless at first glance chemical substances may cause irritation to the skin of the hands and respiratory tract. Use gloves, do not close doors and windows in the room, do not use hot solutions unnecessarily (to avoid inhaling chemical fumes). Wear a respirator when handling liquids containing chlorine.
• You can not rub the bath with hard brushes and metal washcloths, sponges made of fiberglass. This will damage the top layer of enamel, and as a result, the surface will become more dirty, and it will become more difficult to whiten it.
• It is not recommended to use toilet cleaners for the bathroom - they are too aggressive.

Enamel is corroded by products that contain the following chemicals:

• hydrochloric acid;
• oxalic acid;
• alkalis;
• aldehydes.

Also, do not use various abrasive powders to remove yellowness. Modern household chemicals provide a wide range of products in the form of pastes, gels, creams and liquids - choose from them.

How to wash the bath without difficulty? The easiest way is to use special household chemicals sold in stores. It will cost a little more and is not as safe for health, but with correct selection cleaning even an old cast-iron bathtub is not difficult. Here is a description of the most popular products that you can buy in household chemical stores.

• Domestos is quite suitable for regular care, although it contains chlorine. It cleans up stains easily medium difficulty but will not remove limescale or deep-seated dirt. In addition, it is unpleasant to work with him because of the pungent smell.
• Cilli Bang- the best remedy for regular cleaning, but it is not very effective against rust.
• cif. Use cream or gel. The Ultra White series will help whiten yellowness.
• Pemolux is a soda-based product that is quite effective and safe. It can be used to remove dirt from old bathtubs where the enamel is already slightly damaged.
• Comet in the form of a gel is used to whiten the surface and remove stubborn dirt. Best Series- "7 days of purity" with prolonged action.

Folk remedies

Household chemicals can be replaced folk remedies. Of course, they will not cope with chronic pollution, and in order to return the bath to its original whiteness, you will have to work hard with a sponge. But precisely simple ways preferred by many people who do not want to use modern chemistry (reasons may be health concerns, allergies in the home, small children, saving money). Also, such cleaners do not damage the enamel coating of cast iron and steel baths which prolongs their service life.

• Soda. This is an excellent and undeservedly forgotten tool for cleaning almost any dirt, except for lime. It perfectly removes fat, yellowness and eliminates bad smell. This is a very cheap and safe substance for the health of households. at home with soda? It can simply be applied to the surface with a sponge, or you can use the following recipe. Baking soda is mixed with soda ash in a ratio of 1:1. The bath is moistened and the composition is applied for 20-30 minutes. Then the surface must be cleaned with a sponge dipped in table vinegar, without washing off the soda. After half an hour, carefully wipe the surface with the resulting mixture and rinse with warm water.

• Vinegar . Table vinegar (9%) copes well with ordinary dirt and rust. It will take time to clean the surface. Soak paper towels or towels in the vinegar solution and cover the entire surface of the tub with them. Leave for 3-5 hours. Then remove the paper and rinse the tub with water. Most likely, it will turn out to whiten the surface by several tones.
• Lemon acid. Solutions of citric acid will remove both rust and limescale. Apply it like this. Two tablespoons of citric acid are dissolved in half a liter of hot water. Using a sponge, apply the solution to the surface of the bath and incubate for half an hour. Then wash off with water.
• mustard powder. A paste is made from it, which is used to clean the contaminated areas of the enamel.

For the lazy, there are simpler recipes. Water is taken into the bath and one and a half liters of vinegar or 100 g of citric acid are dissolved in it. Leave for the night, in the morning the water is drained and the bath is rinsed with water.

Limescale cleaning

From home remedies, you can make mixtures that will help with your own hands and clean limescale and rust.

Here are a few useful tips for removal of a limy raid from the enameled surface of cast-iron and steel bathtubs.

• Mix borax (sodium tetraborate, sold in pharmacies) and table vinegar in equal proportions.
• Mix the heated vinegar with salt to make a slurry.
• Mix salt and turpentine in equal proportions.

The mixture is applied to the stain and carefully rubbed it with a cloth.

Removing rust

How to clean the bath at home from rust? Here are some recipes.

• Ammonia is dissolved in water and applied to the problem area for 10-15 minutes, then washed off with water.
• Squeeze out onto rust spots lemon juice hold for 10-15 minutes.
• Rub the rust with a mixture of vinegar and salt.

A little about acrylic bathtubs

How to wash an acrylic bath? It is best to use special gel or cream products: "Acrilan", "Pani Vanna", "Ravak", "Sun Klin", "Tim Profi", "Mr. Chister", "Acryl Polish", "Triton".

Do not use products containing:

• acetone;
• ammonia;
• chlorine;
• alcohol;
• formaldehydes;
• alkali;
• acids.

The surface should be cleaned no more than once every two weeks, and disinfected once a week. If you don't have special means for disinfection, use the usual laundry soap. Apply soap solution on the surface of the acrylic bath, and then rinse.

Now you know many ways to clean a dirty bathroom. For each type of pollution suitable cleaning products. It can be ordinary soda or an expensive whitening gel for plumbing. The main thing is that it be effective and easy to use.

We love to keep our home clean and comfortable. One of the most important places to be perfectly clean is the bathroom.

Today we will talk about how to clean a bath from rust, how to clean a bath from stains and dirt, how to bleach a bath, how to clean an old bath, how to clean a bath from yellowness, how to clean a bath from rust and other contaminants.

Sooner or later, under the influence of water, the bathtub will turn yellow, plumbing will be covered with plaque, and rust will appear in places where water lingers the longest.

The first answer to questions about how to clean a bathtub, and how to clean a bathtub from rust, yellowness, stains, is to purchase a good detergent.

Modern detergents effectively whiten the bath, cleaning all kinds of stains. But there are quite aggressive detergents that can adversely affect the enamel coating of the bath.

If you don't trust store-bought detergents, try making your own homemade bathroom cleaners. Here are some tips for cleaning your bathtub.

How to clean the bath, and how to clean the bath from rust

You can clean the bath from rust using a solution of ammonia and hydrogen peroxide. Two pharmacy drug mix 2 to 1, carefully wiping the tub where there are rust spots.

Having warmed up the vinegar well, stir a few tablespoons of salt in it and rub the places affected by rust with the prepared consistency (1 tablespoon per 50 ml).

Leave your homemade bathtub cleaner for a while so it can work on the rust stains, and then rinse everything off with clean water.

How to clean the bath from plaque, and how to clean the bath from plaque

You can clean the bath from plaque using a product made from turpentine and solvents for oil paints.

The bath is carefully treated with this product, applying it with a soft sponge. After all problem areas are processed, wait a while.

Next, wash the tub with powdered water. Of course, after all means - clean water in in large numbers.

How to clean the bath from yellowness, and how to clean the bath from yellowness

Yellowness probably makes everyone very unpleasant emotions, because you seem to be cleaning the bath, but the tone of yellowness does not disappear anywhere.

What to do in such a case. In order to clean the bath from yellowness, take hydrochloric acid and ordinary water (1/2), prepare a solution.

Then the prepared product is applied to the yellowed areas of the bath. 15 minutes later, the bath bowl is thoroughly wiped with washing powder and water. The procedure ends, as always, by rinsing the bath with clean water.

If you don’t know how to clean an old bathtub from stains, yellowness and rust, here we advise you to carry out washing cleaning procedures several times, because old stains are firmly ingrained into the enamel of the bathtub and will certainly not work with them the first time.

But still, it is advisable to clean the bathtub regularly to avoid old stains on the bathtub.

Remember to clean the tub with rubber gloves to protect your hands.

Bath cleaning is carried out using sponges, brushes of soft texture. Hard ones can damage the enamel.

Presence at the bathroom metal objects will cause rust.

Remember, acrylic bowls do not tolerate abrasives. When buying detergents, keep this in mind.
acrylic bathtub, cast iron bath and baths made of other materials are cleaned differently. When choosing detergents, keep this in mind so as not to damage the appearance of the bath.

We hope our tips on how to clean the bath from rust, yellowness, plaque and old stains will be useful to you and you will make your bath perfectly clean without any problems.