We make traps for wasps with our own hands. How to make a trap in Minecraft: the simplest engineering solutions

Depending on the available knowledge, experience and practical skills, the swarming of bees can be a period for the beekeeper when he loses bee colonies or, conversely, successfully expands his apiary. If you intend to increase the number of colonies, then the bee swarm trap is an easy and inexpensive way in beekeeping to fulfill your desire. This will require very few materials, five old frames and a little time.

Period active growth and breeding of bee colonies occurs in the spring. Initially, the swarm that flew out tries to take root not far from the apiary, but not finding suitable place, it flies further. At this time, the beekeeper may still try to remove it, but then, after several flights, the swarm may fly so far that it becomes problematic to get it.

During swarming, bees look for old tree holes or other dry places that are protected from adverse weather conditions. And as such a convenient place, they can choose special multi-tiered traps for swarms of bees arranged by man.

In the old days, constructions for attracting bees were made from round cuttings of tree trunks, hollowing out the core, closing it on both sides with lids. Such products attracted bees very well, but they were very heavy, bulky and inconvenient for moving a family to permanent place to the hive.

The modern trap is light wooden a box with an opening lid, having one notch of increased size and a volume of 4-6 frames inside.

Go to the installation of 7 frames is no longer necessary. For bees, this space may seem too cramped.

For manufacturing, plywood 4-5 mm thick or thin boards of wood are usually used. hardwood. Less commonly used fibreboard, since the fiberboard bee trap turns out to be quite heavy, and with a small thickness of the material, it is fragile. Moisture-permeable materials cannot be used, so cardboard traps are not made.

Basic requirements for traps

Among the many options, preference should be given vertical structures with an entrance resembling a small hollow. In fact, the trap is a small hive in which a bee family temporarily settles until it is moved to a permanent place. For its manufacture, you can use varieties of wood with a low resin content or moisture-resistant plywood.

Fasteners and glue should not give off strong odors that can scare away bees.

Ventilation exchange should be carried out inside the box. Given that the trap is always outdoors, it should be well tolerated by any adverse weather conditions. Therefore, the materials for its manufacture must be durable and not be destroyed by moisture.

The simplest and most reliable bee trap is made of plywood. Fastening bars with plywood walls are best placed inside the structure. In this case, moisture will not accumulate under them.

The dimensions of the bee trap should provide that the internal volume should not be less than 40 liters. At the same time, a box of more than 70 liters will turn out to be bulky, heavy and inconvenient for mounting it on a tree or in another place. The inner frames must be securely fastened with small bars nailed on top. This will prevent them from shifting when transporting the trap to the apiary.

To lure bees, you need a well-defined smell that is pleasant for insects. It can be propolis, lemon balm or burnt wood. There are artificial baits that you can buy in a specialty store. The smell of fresh paint repels bees for up to six months.

One of the options for making a trap

Most modern bee traps are a wooden vertical box with a volume of 40-50 liters with an enlarged notch, equipped with a closing damper, and 4-6 frames located inside.

Therefore, before you make a trap for bees with your own hands, you need to draw a sketch of such a design. This will not be difficult, but it is necessary to do this. The existing scheme will allow you to make all the parts necessary for assembly, without making mistakes in size when making a trap for bees.

Trap drawing with dimensions.

In one of the side walls, it is necessary to provide for a tap hole. Its recommended dimensions are 100 mm wide and 15 mm high. It is located at a height of 20-25 cm from the bottom of the trap. Two side walls should be provided with wooden slats for installing honeycomb frames.

The top cover should be slightly larger than the outer dimensions of the case. On its surface there should be 4 bars, the perimeter of which coincides with the internal dimensions of the trap, as shown in the photo. Connecting fastening rails are located at the corners of the designed box inside the structure.

Scheme of cutting a sheet of plywood.

From the materials for the manufacture you will need:

• hardwood boards 15-20 mm thick or high-quality moisture-resistant plywood;
• wooden slats 15x15 or 20x15 mm;
• sheet foam with a thickness of 20-30 mm;
• plastic film or other waterproofing material to protect the structure from the effects of precipitation;
• nails, screws or screws;
• knitting wire;
• woven belt or looped handles;
• 4-6 old honeycomb frames.

From the tool to do the work you need to prepare;

• hand saw with fine teeth or electric jigsaw;
• a hammer, Phillips screwdriver or screwdriver;
• measuring tape;
• knife and scissors;
• construction stapler.

After completing the drawing of the trap for bees, work begins with the manufacture of the details of the bottom and walls. Next you need:

1. connect the finished wall shields and the bottom without gaps with the help of wooden slats installed along inside corners constructions;
2. make a cover, insulate its inner surface with foam and do not nail it to the rest of the details yet;
3. treat all external surfaces with natural drying oil and dry in the open air for at least a day;
4. fit the outer surfaces of the walls, bottom and cover plastic wrap, fixing it with a stapler or wallpaper nails;
5. lightly grease everything internal surfaces propolis, lemon balm or other type of bait;
6. inside the box, parallel to the notch, install 4-5 old honeycomb frames and additionally fix them on top with nailed rails;
7. install the prepared cover;
8. outside of two opposite walls, hammer in 2 nails at the same height;
9. wind the wire to the nails so that it holds the lid, covering it from above;
10. for easy carrying, attach a belt or handles to the side walls of the trap.

The first notch frame should be with honeycombs, and only then honeycomb is placed.

1 of 3

The finished body can be upholstered with a pest-free tree bark or paint the trap with camouflage paint. In this form, it can become more interesting for bees and will attract less attention from outsiders. For more details on the technology of making a trap for bees, see the video.

bottle traps

These simple designs, are installed not to catch bees, but to catch and destroy wasps, which sometimes cause quite sensitive harm to the apiary, stealing honey.

To make a trap from a bottle, you need to take the usual plastic container 1.5-2.0 liters and cut off its conical part with a knife. Place honey or other sweet bait inside the body, turn the cone over reverse side and insert inside the larger part of the bottle. Connect the parts together with adhesive tape or glue.

Wasp falling into inner space, will not be able to find a way out and will remain inside. In addition, other wasps will see it through the transparent walls and also try to get inside the trap.

Trap placement and existing baits

The best place for correct installation traps are branches near the trunk of a strong tree on the edge of a forest or in a garden. Nearby must be a reservoir or other source of clean water.

For placement, you can not use places that are constantly illuminated by the sun without at least a temporary shadow. At the same time, a permanently shaded area will not work either. The direction of the notch during installation should be to the south. The best location height is 6-8 meters above the ground.

Relatively close to the established trap there should be places for collecting honey. It can be blooming trees, giving the first bribes of willow, various crops.

As a bait, heated propolis is used, which is rubbed on the inner walls of the trap during its manufacture. The smell of old dark honeycombs also successfully attracts bees. If you have at least one such frame, be sure to install it inside. Pheromone baits, which are sold in specialized stores, work well.

Related videos

Traps are designed not only to catch different living creatures, but also for protection. For example, if you are on country cottage area or a thief enters the apartment, he can easily fall into the trap that you set for him.

Remember that in the forest you can find traps set for animals. However, if the trap is designed for a large animal, it will also hurt you, so be careful.

In total, there are four types of traps that operate according to different principles - percussion, suffocation, suspension and immobilization.

Remember that, for example, traps can immobilize or cripple a person, so be careful when placing them. If, nevertheless, you decide to make a trap for a person, take care of its careful disguise, since a person is more cautious and cunning than animals.

Now we will tell you how to make a trap using improvised materials.

The simplest trap in the room

Stretch the thread between walls that are close to each other (for example, between the walls of the corridor).

Place the wooden block vertically so that the thread keeps it from falling.

Now take a spoon and place it where the bar will fall after touching the thread. Calculate everything so that the spoon flies up after the fall of the bar.

Ten habits that make people chronically unhappy

What is the best position to sleep in

Is a man in love with you: 10 signs

Now on the opposite end of the spoon you can put a small object, for example, candy. After someone hooks the thread, the end of the bar will hit the spoon, and the candy will fly towards the “intruder”.

How to make a human finger trap

This trap was invented long ago in Asia. The essence of her work is that both index fingers are inserted from different sides of the tube. After that, it is almost impossible to pull the fingers out of the trap, and at the same time, the more you apply for this, the tighter the trap is tightened.

Making such a trap is not at all difficult.

In ancient times, the Chinese used bamboo for the base, then the trap turned out to be durable. We will use paper for this purpose.

Take two sheets of paper different colors then the craft will look pretty. In addition, it will be easier to do.

Cut out four strips of paper - two from one color and two from another. Their thickness should be twelve millimeters, and the length should be like a standard sheet of A4 paper on the larger side.

Now glue them in such a way that you get corners. To do this, glue a strip of a different color to a strip of one color at an angle of ninety degrees. Do not abuse the amount of glue, otherwise the paper will get wet.

Now you will need a cylindrical object long enough to fit both of your index fingers. Since the craft is absolutely not dangerous, it can even be made for a child, but consider the length of the cylinder.

What do people regret most at the end of their lives?

Benefits of Drinking Coffee

15 shocking plastic surgeries that ended in failure

The cylinder should be about one and a half centimeters thick, or equal to the diameter of your finger.

Take small pieces of electrical tape and loop them. As a result, you will make a cylinder small size, which will have sticky all sides. Glue it to the back of the paper corners.

Now the trap needs to be assembled. To do this, glue the prepared ones to one edge, but from opposite sides, to a cylindrical shape. In this case, the corners will protrude upward.

Then you need to do weaving. To do this, pass a strip of one color under a strip of another color and press it with your finger. Do the same with reverse side and rotate the cylindrical shape. Now thread the first tape under the second, clamp and turn over again.

Continue binding until the cylinder is completely covered with paper. While weaving, gradually compact the coating by sliding it up. Now glue all the paper pieces, observing the order.

Cut off the remaining excess pieces and remove the insulating tape. After that, the cylinder will easily shake out of the craft.

Now you can try the craft.

If everything is done correctly, then after you insert index fingers you won't be able to pull them out.

To release from the grip, pinch the paper strips on both sides and slowly pull your fingers out.

Now let's take a look at more dangerous species traps that are used even in war. Let's take the Vietnam War as an example.

In order to warn their own people and not to forget about the mine themselves, the location of the trap was marked with different marks, examples of which are shown below. The same marks even indicate how far the mine is.

The process of setting the trap.

The most popular and commonly used trap is the punji. The cost of its manufacture is small, so this type of trap was very common during the war.

In order to make it, you dig a small hole and cover it with a board, into which you drive nails or place stakes. Place the board with the tips up and sprinkle it with leaves. Believe me, stepping on such a board, a soldier can even pierce his foot through and through.

This type of trap can be improved. The figure below shows everything clearly.

Punji board. It was placed where the narrow passage was, and carefully masked. The basic principle of such a trap is that the soldier falls into a dug hole and gets hit with a board on the chest and head.

We will not describe traps that use any type of weapon, because it is unlikely that you will be able to get the necessary parts.

Video lessons

For a person? Someone is driven by simple curiosity, another needs it for reasons of their own safety, and someone wants to catch an apartment thief.

Usually people hunt birds and animals, set traps for large and small game. Since ancient times, man has adapted to provide himself with furs and meat, capturing animals. Let's get acquainted with some of these devices to find out if and how to make a trap for a person at home.

Venter, mousetraps, nets, pits

They call it traps technical devices from metal, ropes, branches, the use of natural features of the terrain to capture the victim or take her life. An object can be either an animal or a person. And in order for the hunt to become successful, it is necessary to take into account not only the size, but also the habits, lifestyle and disposition of the intended victim. How to make a trap for a person? Here is a small list of devices that can help in this venture:

• Snares, nets, nets. Although they are usually used to capture hares and birds, these traps may well detain a potential victim, in our case, a representative of the human race.
• A bucket of water, fixed over an ajar door, is one of the options for a makeshift trap.
• A banana peel thrown under the attacker's feet will cause him to fall to the floor.

Like in the movies

There are traps, once in which it is impossible to stay alive. Similar designs usually arranged during military operations by guerrillas in Vietnam. And the hunters of the African tribes knew well how to make a trap for a person.

In the forest, you always need to be careful, as an ordinary anthill can turn into a trap. Moving logs, falling stones from nowhere and other "miracles of engineering" are very colorfully demonstrated in many films, and so clearly that even instructions on how to make a trap for a person are not needed.

However, let's leave these methods for cinema, and in modern realities, simple and safe methods. Although ... Let's remember the well-known and beloved by many film "Home Alone". Not all the traps prepared by M. Kalkin's hero can be called safe for health. And of course, they became an unpleasant surprise for the villains. However, we will talk about thieves, or rather about the methods of their "liquidation", a little later, but for now ...

Game and fun snares

Of course, traps are not only scary and dangerous, but also playable. How to make a trap for a person in the house? If you want to entertain children and the area of ​​\u200b\u200bthe room allows, you can arrange a game "Overcoming laser obstacles." You need to do the following:

• arrange several chairs around the room at different distances from each other;
• take a ball of thick thread or a long rope;
• tie one end of the thread to the leg of one of the chairs;
• stretch a thread or rope from one piece of furniture to another, fixing it on different height randomly;
• the second end of the rope must also be attached.

As a result of such manipulations, a kind of “obstacle course” should be obtained, resembling a network of light rays.

Participants, being on one side of the room, must move to the free part of the room. Whoever gets out the fastest wins. Is it worth mentioning that touching " laser beams" it is forbidden?

How Auntie Scared Thieves

Of course, in peacetime, variations on the theme “How to make a trap for a person” are usually sought in order to protect their housing from the intrusion of uninvited guests. Our people are cunning to invent, they invent such methods that you simply marvel.

For example, one of the townspeople made a large rag doll, dressed her in her old dressing gown, put a wig on her head. Before leaving for the dacha, the woman hangs this mannequin in the hallway in front of the front door. Any thief, having climbed into the house and seen such a picture, will forget about the purpose of his “visit” and retreat. Well, okay! After all, the main thing is to protect your property, and not to catch the villain.

Some of the craftsmen connect one of the lamps to a timer that turns the lamp on and off from time to time. This gives the impression that there are owners in the house.

Special tools, or How to make a trap for a person

To protect apartments, garages and cottages, manufacturers produce quite effective, but at the same time safe and inexpensive devices.

Devices for passive security can be camouflaged as small objects or simply hidden in a room. Chemical aerosol traps contain special indelible substances:

• luminescent spots on the face or visible in the dark;
• coloring powders cannot be washed within 5 days, which will allow you to quickly find an intruder (works great if the uninvited visitor is from a familiar environment);
• by odorous marks, a thief can easily be found by a service dog.

The magnetic siren, triggered when the doors are opened, will scare away the uninvited "guest". Stretching with mounted on front door, in a couple of seconds will disable the unlucky thief.

Some landlords, wanting to protect themselves from robbery, leave poisoned alcohol on the table, others set traps for people. Particularly "caring" can connect an electric current to the door handle or put boards with nails under the window sills.

Such barbaric defenses can result in the attacker dying or being seriously injured. Effective, to be sure, but ... It is important to remember that, in accordance with the law, such actions are considered intentional harm to health. Even if the owner of the house resorts to them for protection purposes, he may be subject to criminal punishment.

A trap on the native street, or On safety and inattention

How to make a trap for a person on the street? It is not always necessary to deliberately dig holes, insert stakes, or set snares. A deadly trap on the streets of a modern city can be an open and unfenced trench, a construction pit and a well with boiling water from a heating main.

If construction is underway near the house, it is imperative to look after children and adolescents. After all, it is so interesting for them to be on the territory of the “excavations”, and games in such a place often end in failure: spinal injuries, fractures and concussions.

In order not to fall into an open well, you need to carefully look under your feet when driving on sidewalks. Of course, builders and repairers must put up fences and warning signs when working on the site. However, to preserve own health You also need to take care of yourself.

The Imperium was founded by the Emperor, also known as the Immortal Emperor, God-Emperor and Master of Mankind at the end of the Age of Strife - a long period of anarchy, war and destructive regression that brought humanity to the brink of extinction and almost completely destroyed the technological achievements of people made during the Dark Age Technologies. During the Unification Wars, the Emperor led his proto-Astartes known as the Thunder Warriors to victory and unify the Earth for the first time in many millennia. As the Warp Storms that accompanied the Age of Strife began to subside, the Emperor added the research stations and space docks of the Moon, as well as the factories and scientists of Mars, to the nascent Imperium. A huge fleet was built spaceships, on which the armies of the Emperor set off on the Great Crusade, which lasted about two hundred years. During this same period, the Emperor created his most powerful warriors, the Space Marine Legions, led by the Primarchs. The Space Marines, together with the might of the Imperial Army (subsequently divided into the Imperial Navy and Imperial Guard), as well as the Custodian Guard, the Sisters of Silence, and the armed forces of the Mechanicum of Mars, the Legio Cybernetica and the Titanic College, brought thousands of human worlds into the fold of the Imperium. Unfortunately, the Great Crusade ended with the betrayal of the Primarch Horus, known as the Horus Heresy. The uprising swept the entire galaxy. Horus, seeking to win a quick and decisive victory, led the troops of the traitors in an attack on the capital of mankind. It was there, in the Battle for Terra, that the decisive battle took place between the Emperor himself and the Arch-traitor. Horus was killed, bringing the rebellion to an end, and the surviving traitors fled to the Eye of Terror. Unfortunately, the Master of Mankind was also mortally wounded. By his order, he was connected to the Golden Throne, which has been keeping him alive for almost ten thousand years. Though his body is no longer able to move or communicate, the power of the Emperor illuminates the Warp and restrains demons with the guiding light of the Astronomicon. The Emperor is only held together by his unbending will and the souls of the psykers who sacrifice their lives to keep the Astronomicon alive. To the countless inhabitants of the Imperium, the Emperor is a god incarnate. In the immediate aftermath of the Horus Heresy, the Purification, and the Rebirth Era, the Imperium slowly but surely regained control of the human domain in the galaxy. During this same period, the last remaining Primarchs loyal to the Emperor fell in battle, were mortally wounded, or vanished without a trace. Whatever the case, in the era that followed, known as the Formation, the Imperium prospered and expanded. However, in M35 and M36 the Imperium was engulfed in turmoil during the Interregnum of New Terra and the Age of Apostasy. This time was marked by the most cruel civil wars since the Horus Heresy. After these events, the Imperium was again reorganized and in the ensuing Era of Redemption, a huge number of heretics were destroyed. These events culminated in a series of great Crusades and Wars of Faith, the most famous being the Redemptive Crusades and the Macharius Crusade. Unfortunately, despite the success of the campaigns, this sapped the forces of the Imperium. The xenos and forces of Chaos did not fail to take advantage of this, attacking and capturing many worlds in the era that became known as the Decay. The fading culminated in the later years of M41, known as the Sunset Period. During this time, a depleted Imperium is forced to fight not only old threats, but also terrifying new foes such as the Necrons and Tyranids, as well as small but rapidly growing new xenos empires such as the Tau, Ulumeat and Fetid. Surrounded on all sides by heresy, alien invasions and the forces of Chaos, the Imperium has entered its darkest times. But soon the Imperium found new hope for a better future: one of the primarchs, Roboute Guilliman, returned from the dead. Quickly assessing the situation and current state of the Imperium, he instantly began his Invincible Crusade. At the same time, the primarch began to rebuild the Imperium in order to restore the former glory of Mankind, even if by such extraordinary methods as a forced alliance with the Eldar.

In today's video, I will show you the idea of ​​how to make a crayfish trap, or as many people call it, a do-it-yourself crayfish trap at home. How to catch crayfish yourself in today's video will be discussed. Crayfish traps have retained their design with only minor changes over the centuries, they are very simple and therefore can be easily and quickly made at home. The favorite habitat of crayfish is clean running water reservoirs with peat or rocky bottom. For the manufacture of the simplest crust, you will need a piece of aluminum or steel wire and metal grid with a cell of 5-6 mm. ******************************************************* ********** I welcome you to my channel Roman Ursu, where you will learn how to make homemade crafts, Christmas crafts, gifts, toys, scarecrows for Halloween, and most importantly, that all this can be done at home and with your own hands! Are you into handicrafts, crafts or do you just have nothing to do? Then you got to the channel you need here you can find a lot of homemade crafts, crafts that are made by yourself, and most importantly, they are all made from improvised means and at minimal cost! ******************************************************* ********** main channel: http://www.youtube.com/user/romanursu my second channel: https://www.youtube.com/user/romanursuvlogs Vkontakte community: http://vk.com/club59870517 group in classmates: http://www.odnoklassniki.ru/romanursu Attention! be careful and do not repeat this at home, the author is not responsible for your actions, this is an entertainment video, not a training or a call to action! ATTENTION!!! - my channel for decent ones: for mate, shortened or modified mate, for insults and "trolling" - I WILL BAN!!! ******************************************************* ********** Part 2 http://youtu.be/cgSXEIpqVLs In this video I "ll show you how to make a crawfish trap. I" ll tell you how to catch crawfish. Crawfish traps save their construction with minor changes through centuries, they are very easy and fast to make at home. Crawfish lives in a clear running water basins with turfy or stony bottom. In order to make a simple crawfish trap we need a piece of tin or steel wire and a metal net with 5-6 mm mash. You may use pieces of fish or frogs cut near the stomach as bait. Welcome to my channel Roman Ursu where you will learn how to make hand made crafts, New Year crafts, gifts, toys, Halloween scares. The main thing is that one can make it at home and with one "s own hands. You are interested in handiwork, craft or you just have nothing to do, haven" t you? You have found the channel you really need. Here you can find lots of crafts, hand made items, and the main thing is that they all made of make-shifts and at the lowest cost! main channel.