For Russian artists, the theme of snow towns and games on ice has always aroused great interest. The great masters painted pictures that attracted art lovers with the originality of execution, the beauty and naturalness of sparkling snow and the brightness of the clothes of its participants.
Modern forms of building snow and ice compositions differ from those that were accepted in the past. Ice slides made of snow blocks have replaced the ancient castles, and the fortress walls of the settlements have now become space rockets. But this does not overshadow the joy of the kids from riding the roller coaster.
The tower of the snow castle becomes the starting point for those who love fast driving on sleds or ice. Its structure is assembled from snow blocks, fastened together with a "solution" of water. For round turrets surrounding the launch pad, a frame made of wooden sticks or branched knots of old trees can be used. All main dimensions of the ice slopes of the tetrahedral tower are shown in the figure and drawing.
The figure shows a simple slide, the beginning of which is an arch made of snow blocks. The ladder for climbing to the launch pad is made of boards of inclined ramps (ramps). As decorative ornament used colored balls attached to the side of the ice track. Stars are engraved on the walls of the arch.
The center of the composition of the snow play complex is a round tower imitating the watchtowers of the fortress walls. It was assembled from snow and ice blocks. By the way, in this case, the ice blocks act as a fastening belt, which makes it possible to give the tower vertical stability.
From the tower there are two inclined curved paths with ice cover. One of them passes through the arch, the other - past two small mushroom-shaped towers.
As a decoration, you can use decorative colored balls painted with bright paint.
In some cases, as load-bearing frame you can use the walls of wooden summer playgrounds. Partially they are covered with white snow, and the ice paths for the descent are filled with water. Such a symbiosis of wood and snow becomes a reliable and safe slide. winter decoration there may be arches with snowflakes. Polyurethane foam or soft cloth can be reinforced in arches and ice rings to prevent injury. A simple ice slide is made of snow. To make it rigid, you need to use wooden frame(bars, slats, trunks of dry trees).
Communication and interlacing of vertical and horizontal elements is carried out with the help of a rope made of jute, a cable. Such constructive solution will allow you to create a strong snow-ice monolith, which will be the basis for a slide of any shape and decorative ornaments.
3. Pack the piled snow very tightly. The height of the snow slide should be made such that it is convenient for both adults and children to ride on it. It is important that it is very convenient not only for children, but also for adults in this case. If a snow slide unable to assemble, ask a person to snow blower Can I help you. I think that he will not refuse you this pleasure.
4. Having poured a certain amount of snow on the hill, and then tamping it, align its future congress. It is important that it be as even as possible, so manually, or with a shovel, remove all irregularities visible to the eye. Do not forget to make a step for your slide. Otherwise, how are you going to get on it? Steps should be as flat and gentle as possible. This is very important if you want to keep your health and the health of others safe and sound.
5. Simultaneously with the alignment of the slide, seal its edges so that it does not crumble at the first contact with your hand. Along the edges of the descent, it is best to make a low board, which will not make it possible to move down the hill in the wrong place. In this case, it will help prevent any kind of injury during the suspension and climbing the hill. Be careful!
6. After the slide is already formed, you can start pouring it! It's important to stay outside subzero temperature in the process of applying the final touch. It is best if you water it at night. Watering is best from a watering can or bucket. But it is better if you water the hill all the same from a watering can, because it is she who will give the hill a smooth descent and create an indelible impression of the process itself. Thus, flooding the hill at night, you will protect it from unauthorized persons. It is unlikely that anyone would think of climbing a hill in the dark, and even more so riding it. After all, your neighbors are far from stupid people.
Find out how you can make a snow slide yourself in winter, how to properly fill it with water so that it freezes.
Agree that in new year holidays one of the best, most memorable childhood memories is winter festivities. Making a snowman, sledding, skiing, and, of course, on a roller coaster is a wonderful activity. The latter will be discussed in this article.
You will learn how to build a slide without difficulties at home, without anyone's help from outside. This slide will bring great joy to your kids and even adults, and so that the work is not so boring, you can involve the whole family in it.
It often happens that some problems occur during the construction of the slide. It collapses, disintegrates, pits, irregularities appear in the most inappropriate place. Next, you will learn how to make a slide correctly. So that it is durable, reliable, and most importantly - comfortable.
Materials for the construction of the slide
For a successful build you will need the following:
To blind a slide, you must follow a few simple rules:
Security. Choose a safe location future design. This is necessary so that your child is not injured during the descent, so that there are no trees, fences, roads, bushes and other obstacles on the way. You should not create an object of entertainment under the roofs of old houses, from which icicle, slate, brick, etc. can fall.
Hill height, angle of inclination. Determine the height of the future slide based on the age of the children. For very young children, somewhere up to three years old, a slide of one meter in height is enough. For older children, the most optimal, safe height is two to four meters. You should also follow right angle tilt, such that it was not more than forty degrees.
pure snow. When building a slide, you need to use pure material. Since your child can smear things. Make sure the kids don't get hurt. The problem arises if there is debris, branches, sticks, etc. in the snow.
Creation order ice slide:
IMPORTANT: Acceptable step width is at least twenty-nine centimeters.
Do not forget about the sides. Their height should be approximately ten to thirty centimeters, depending on the age of the child. The sides can be made with a shovel. Also, in order to give them a form, it is necessary to use manual work. During it, do not forget to wear gloves as protection from the cold.
If there is a desire, time, then add decor. Decorate the hill with snowmen, various figures, paint it with patterns. Or do everything to your liking, a lot depends on your imagination.
We have come to the most difficult final stage - to fill the ice slide with water. The descent of the slide must be poured in several stages - at least three times. Use cool water with a sprayer, watering can, ladle.
You will need a broom, with which you spray an even layer of water over the entire surface of the structure. Make sure that there are no bumps, holes, bumps. To do this, during pouring, it is necessary to slap a seized thin, fragile layer of ice with a broom. After the second stage, you have a rough crust of ice. For a more reliable result, fill the slide for the third time, after which you will get a strong, smooth, and most importantly, reliable design.
IMPORTANT: It is worth pouring the finished structure at a low temperature, from 10 degrees below zero. Otherwise, your efforts will be completely useless.
Subject to the entire sequence of work, you will get an excellent snow slide, which your children will be very happy with. If the winter turns out to be frosty, then the subject of entertainment will stand until the spring thaw.
Skiing is one of the most popular activities for young people. But sometimes, there are practically no suitable slopes in the area. Therefore, you need to make a snow slide with your own hands in the country or near the house. And for this you need a little hard work and a lot of snow. It is better to build such a structure in big company. Then you will do everything quickly, and you will have fun.
First of all, you need to find a safe place. You should take care to:
You should also look for some kind of natural slope. So nature will do some of the work for you. You just slightly increase the already found small descent, and the job will be finished.
Create such fun in a spacious place so that it is easy for you to walk around the slide.
The size of the slide can be any. But if you are building it for young children, then it is better not to be zealous. After all, safety also plays a role here.
First, you will need to create a large pile of snow. Just throw snow in one place, making a big snowdrift. At the same time, you need to periodically tamp it all down.
When the pile turned out, you can leave it for one day. So the snow is compacted under its own weight and it can be watered. If you do not want to wait, then just make a snowdrift in the morning. Fill it up in the evening.
After creating a snow heap, you can proceed to " water procedures". Use a hose or bucket to slowly water the part of the slide that you will ride.
You need to periodically level the watered surface and cover the pits with dense snow. As a result, you should get something similar to a dense ice crust.
Remember that the watered mountain must be left at least overnight. So she finally hardens. And it can be used for its intended purpose.
It should be noted that any snow cover is filled with water in several approaches. Do not immediately pour a lot of water. Otherwise, the snow will simply fall through.
Some people flood the slopes that people walk on, turning the path into a slippery surface. You shouldn't do that. This can lead to injury to those who are not aware that there is now a slide.
It is not necessary to make the rolling path from the hill go out onto the road or be close to the road. You understand what it threatens.
Make sure your mountain is only steep at the top. And then there should be a smoother slope. Otherwise, instead of speed, you will only get falls.
And you should not create factors for extreme sports. If you make a slide that will end with a cliff, start with a springboard or go into the bush, then this will not be the most the best way. After all, such a risk will definitely not be justified.
Reading time ≈ 6 minutes
What is winter without snow slides, ice sculptures and snowdrifts! On a frosty winter day, you just want to take an ice cube and run to ride on fresh air, but often there may not be an ice slide nearby at all. It is not surprising that many are interested in how to build a snow slide with their own hands without outside help. This is a real joy not only for kids of all ages, but also for adults. Consider several ways to properly build and fill a snow slide with water so that it freezes.
Let's first figure out what kind of slides exist at all, and what kind of snow structure you can build in your yard.
Types of slides:
The ideal place is game Zone where she used to spend time with her children. Here are some tips for where the children's slide should be:
Photo example of a fun New Year's slide
It is important to remember that the higher you plan to build a snow slide, the more free space should be for a smooth descent. Consider the basic requirements for their manufacture:
Most the best time for the construction of the structure - a clear sunny day, since there is a slight thaw during the day, and at night the frost gets stronger. It is easier to work with a little wet and pliable snow, and at night the result will be fixed by itself.
What tools are needed:
Remember: only pure snow should be used to form the structure! It should also be free of foreign objects: stones, sticks, branches, leaves, etc.
The video below shows how you can build a snow slide with your own hands in kindergarten or backyard of your house.
Once you have decided on the location and dimensions of the structure, prepared all the equipment and called assistants, you can safely get to work:
If desired, you can already use finished frame, For example, wooden stairs, railings, boards, boards, countertops and even car tires which are subsequently covered with snow.
Filling is the most crucial stage, it is important here not to spoil all the work done. The main thing is never to use slides for the bay warm water- it will only leave holes in the snow and melt it. The water should be ice cold - mixed with snow in a metal bucket.
Fill options:
All hills, irregularities and defects are knocked down and leveled until the structure takes the required shape. During the night, the form should “grab”, and the very next day you can try out the slide and ride with your friends!
kayabaparts.ru - Entrance hall, kitchen, living room. Garden. Chairs. Bedroom