How to make a small terrarium in a light bulb - lampoterrarium mk. Eternal terrarium from an ordinary light bulb

Many of you have houses houseplants, which are pleasing to the eye, serve as decorations for the interior and supply you with oxygen. There are an incredibly large number of species of such plants and also many ways to grow and maintain them.

Today we will construct a self-sufficient ecosystem that does not require self-care and will good decoration for your interior or an original gift.

florarium, plant terrarium- a special closed container made of glass or other transparent materials and intended for the maintenance and cultivation of plants. A certain air humidity and temperature are created inside, which contributes to the creation of an environment for the normal development and existence of plants. Florariums appeared in the middle of the 19th century. The first plants to be used in florariums were different kinds ferns.

As follows from the description, we need a closed glass container. Can be used glass jars, medical flasks, bottles, in general, any vessel that closes hermetically without problems. Entering the search query " closed ecosystem", I found interesting option, which uses an ordinary incandescent light bulb, and a bunch of material how, without damaging the glass, disassemble it and plant plants there. This option seemed to me quite interesting and easy to assemble, so I decided to try it.

And so, what we need to create our miniature ecosystem:

1) Small stones for drainage and stones for composition
2) Sand
3) Fertile soil
4) Different kinds moss
5) Bark, small branches for composition
6) Stone or driftwood for the platform
7) Incandescent light bulb
8) Two-component adhesive or hot melt adhesive
9) Pliers
10) Flat screwdriver
11) Tweezers
12) Syringe
13) Water
14) Paper

After a short walk through the forest and the outskirts of the city, I found all the material I needed without any problems.

Let's start assembling. The first thing to do is to prepare our light bulb. With the help of pliers and some force, carefully break the black ceramic insulation, being careful not to bend the base of the bulb and break the glass.

You should have a hole like the photo below.

Next, using a flat screwdriver, you need to break and squeeze out the glass rod on which the filament is attached and remove it from the light bulb. Try to make the most big hole, this will facilitate your future planting process. After all the excess has been removed, I recommend rinsing the light bulb with water in order to avoid contact with small glass particles.

Next, we need to give our light bulb some stability. You can glue legs from something to it, you can glue the light bulb itself to a beautiful snag or, in my case, a stone. To securely bond the glass to the stone, you can use a two-component adhesive or hot melt adhesive. I used Poxipol two part glue.

Now we need to do drainage system. Drainage is a system for removing water through the roots and soil, which allows the roots of plants to breathe when kept. a large number moisture in the ground.

Drainage is very easy to do. In our case, we place a small amount of small stones on the bottom. For convenience, I made a tube out of paper, which will also facilitate the process of filling the light bulb with sand and soil, as well as save the walls from pollution.

Then we fill our light bulb with a fertile layer of earth. Do not be afraid if other plant roots or humus get into the soil - this will only play into your hands, as it will provide your system with useful organic substances.

The next stage is creative. Here you need to show all your artistic abilities to the maximum and beautifully place the components collected in the forest. To facilitate the task of planting plants in a light bulb, I used tweezers and a rod from ballpoint pen. As a result, I got this composition.

The final step in creating an ecosystem will be the addition of a few drops of water. To do this, you can use a medical syringe. It is not necessary to water the plants abundantly, excess moisture will lead to their death. After we have watered, it is necessary to seal the bulb hermetically. There are some special rules no, you can use anything: an acorn, a cork from a wine bottle, plastic cover, wooden stick, etc., the main thing is that air does not enter the structure. I used ordinary black buttons, having previously sealed the holes for attaching them to the material.

After some time, condensation from water drops will begin to form on the walls of the light bulb, you should not be afraid of this, which means that the process of the birth of life is proceeding as it should. These drops will periodically appear and then settle in the soil, simulating rain.

Excess water will go into the drain at the bottom of the light bulb, provided that you organize it correctly. If you suddenly realize that you have poured too much water into your florarium, simply open the hole and leave it open for several hours so that the excess moisture evaporates, then seal the light bulb again.

A day after the construction of my florarium, I decided that the composition needed to be supplemented and attached another light bulb to my platform stone, but this time it was bigger. This is how the final version of my ecosystem now began to look.

By the same principle, the English David Latimer grows tradescantia in a bottle (a genus of perennial evergreen herbaceous plants Commelinaceae family), which has been in a closed space for more than 40 years and has never been watered.

Today it is very popular to make an eternal terrarium from an ordinary light bulb. I decided to try making it with my kids. The terrarium is called eternal because it forms its own microclimate. Water evaporates, condenses and re-enters the soil, nourishing plants and microorganisms. Plants consume water carbon dioxide and sunlight. Plants release oxygen and decompose, thereby serving as fertilizer for new plants. A whole living world in a simple incandescent light bulb.

Videos eternal light bulb terrarium

We'll need

• Non-working incandescent lamp
• stones
• Sand
• Earth
• Plants

Making an eternal terrarium from a light bulb

First you need to remove all the insides from the lamp. We remove the metal contact and break the black insulator.


Using a screwdriver, break off the glass holder, and with the help of tweezers remove it from the lamp.


We will use a stone as a stand. You can show your imagination and come up with some other stand.


We put a few drops of glue on the lamp and glue it at an angle to the stone.

In order to make it easier to fill the terrarium, we will make a paper tube. And with the help of it we fall asleep stones that will act as a base. And the second layer is filled with sand.

Plants for an eternal terrarium

Now let's go to the forest, there we will find everything essential plants for the terrarium. forest plants more tenacious than indoor ones, so they will become wonderful inhabitants of our terrarium. We will need moss and some plants with a small root system. Also in the forest we will collect twigs, stones, and most importantly - do not forget to take some soil.

There is nothing to worry about if insects or insects get into the terrarium from a light bulb. earthworms. They will also become residents of our micro world.

Backfill the terrarium with earth before adding the plants.

The next stage is creative. With enough patience in a light bulb, you can create miniature worlds by arranging stones, twigs, and choosing plants for a terrarium that will combine and complement each other.

The easiest way to place plants in a terrarium made from an incandescent lamp is with tweezers and a small stick.

Don't forget to add some water with a syringe. Without water, no organism can survive, which means we will not get an eternal terrarium in a light bulb.

After all the plants are placed inside, it is necessary to hermetically close the terrarium. To get oxygen out outside world did not get inside, and the water that is inside did not evaporate.


You can close it with a small stone, stick or acorn, which gives a very original look to the terrarium. And fill our cork with super glue on top.

Today it is very popular to make an eternal terrarium from an ordinary light bulb. I decided to try making it with my kids. The terrarium is called eternal because it forms its own microclimate. Water evaporates, condenses and re-enters the soil, nourishing plants and microorganisms. Plants consume water, carbon dioxide and sunlight. Plants release oxygen and decompose, thereby serving as fertilizer for new plants. A whole living world in a simple incandescent light bulb.

Videos eternal light bulb terrarium

We'll need

• Non-working incandescent lamp
• stones
• Sand
• Earth
• Plants

Making an eternal terrarium from a light bulb

First you need to remove all the insides from the lamp. We remove the metal contact and break the black insulator.


Using a screwdriver, break off the glass holder, and with the help of tweezers remove it from the lamp.


We will use a stone as a stand. You can show your imagination and come up with some other stand.


We put a few drops of glue on the lamp and glue it at an angle to the stone.

In order to make it easier to fill the terrarium, we will make a paper tube. And with the help of it we fall asleep stones that will act as a base. And the second layer is filled with sand.

Plants for an eternal terrarium

Now we go to the forest, where we will find all the necessary plants for the terrarium. Forest plants are more tenacious than indoor plants, so they will become excellent inhabitants of our terrarium. We will need moss and some plants with a small root system. Also in the forest we will collect twigs, stones, and most importantly - do not forget to take some soil.

There is nothing to worry about if insects or earthworms get into the terrarium from a light bulb. They will also become residents of our micro world.

Backfill the terrarium with earth before adding the plants.

The next stage is creative. With enough patience in a light bulb, you can create miniature worlds by arranging stones, twigs, and choosing plants for a terrarium that will combine and complement each other.

The easiest way to place plants in a terrarium made from an incandescent lamp is with tweezers and a small stick.

Don't forget to add some water with a syringe. Without water, no organism can survive, which means we will not get an eternal terrarium in a light bulb.

After all the plants are placed inside, it is necessary to hermetically close the terrarium. So that oxygen from the outside world does not get inside, and the water that is inside does not evaporate.


You can close it with a small stone, stick or acorn, which gives a very original look to the terrarium. And fill our cork with super glue on top.

In this publication, we will consider how to make an eternal terrarium from an overheated light bulb. To make it, we need an incandescent light bulb, you can experiment and see how the terrarium will look like in a small or large light bulb. In the end, the technology is important, not the form in which the flora will be laid. Any suitable dish can be used. In two videos of the SLIVKI SHOW channel, you can see the initial state and how everything lives in a few months.

But before starting work, do not forget to wear gloves and goggles, because small glasses that can shatter when preparing a light bulb can be very dangerous.

We take sharp pliers and take out the metal contact from the bulb base. To do this, we split the black insulation and extract the glass contents to the outside. Now you need to find a screwdriver and punch through all the excess inside the light bulb, since we need a clean blank. Be careful with glass fragments, make sure that the fragments do not fall on you and on the floor.

We got an empty container in which it will now be possible to lay all the plants and soil. On the street we find a beautiful stone, on which we make several points with hot glue. They will play the role of soft legs for the stability of the structure and the furniture will be protected from scratches. On one side we spread hot glue and fix the light bulb at an angle. Here is a place for your imagination, you can give our eternal terrarium any position.

Now you need to go into the forest to find ingredients for. We need forest soil, moss, which is very good for our purpose, as it is very hardy, looks beautiful and unpretentious. You will also need for beauty tree bark, pieces of dry branches and an acorn, which will be a cork for a light bulb.

At the bottom we will pour some small stones, they will play the role of drainage. Pour sand over the pebbles, and then add forest soil. For convenience, you can use tweezers or wooden sticks, which almost everyone has at home in abundance.

Now, with the same tools, we beautifully lay fauna objects and others that you like on the bottom of the light bulb. We have almost reached the finish line. It remains to make a few strokes.

Pour in a few drops of water. If you managed to capture a few acorns in the forest, they can also be used to decorate the eternal terrarium. If you don't find any acorns, use a piece of branch that can be crafted into a small cork. Instead of a supply stone, you can use copper wire. As a result, we got a beautiful mini terrarium made from an ordinary burnt out light bulb. Its eternal properties are that it is tightly closed, but this not only does not become detrimental to plants, moreover, it creates a closed ecosystem in which plant life will not stop. Microflora is formed inside, the use of carbon dioxide is the production of oxygen and the water cycle. It's like a small planet with its own conditions in which some species can die, while others flourish for decades.

Now adding in 6 months.
More than half a year has passed since the creation of the first terrarium, and now we will see how it looks. This is a small terrarium that we made from a light bulb. This is how he looked at the beginning. And so now! Apparently, when it was created, a grass seed got inside, and it grew to such a size that there is little to be seen inside. Some blades of grass die off and turn into fertilizer that will nourish the next generations.

Next in line we have a large terrarium in which we populated a colony of goosebumps. Unfortunately, no one is in sight. Apparently, they all hid in minks and seem to be sleeping. Only occasionally sentinels go outside to scout the situation. Here the scout got on some corpse, had a fight with him and went on. Let's give them a little caterpillar and see what happens! By the way, there is a bug, probably, there are many more forms of life, in addition to ants. After a moment, goosebumps apparently found the caterpillar by scent, hugged it and tried to pull it out of the feeder. Then another came, and the three of them went into the hole. And for dessert, we will treat them with honey syrup, and here the goosebumps were more active.
Cookie also enjoyed watching. There, behind the stems, was one of their burrows, and help was coming from there. In a few minutes they were already sitting on top of each other in layers and drinking syrup.

Grass seeds were also found in this terrarium, and one grass sprouted to its full length. This is what its vegetation looked like at the time of creation. And here's how it is now! It wouldn't hurt to mow the lawn. FROM back side goosebumps endured excess soil while digging their aisles. Look how big the centipede is hiding here! What do you think she eats?

The popularity of small do-it-yourself terrariums is increasing. A very useful and cute invention that does not require material investments, effort and special skills.

All that is needed to create a green eco object is a desire, as well as tools. So for home terrarium you will need:

• Ordinary light bulb. You can take a standard "Ilyich lamp", or a special one for lighting large rooms. She's bigger and more attractive. The main thing is that the lamp is transparent.
• Stone, stand or silicone pads to be attached to the bottom of the light bulb so that it is stable and does not fall.
• Tree bark, small stones, shells, sand for filling, drainage and decoration.
• sifted earth, moss, small plants with root system.
• Lid to cover the light bulb.
• Tools: scissors, tongs, pliers, tweezers, screwdriver, syringe with water.

1. The very first step in creating a small terrarium is preparing a light bulb. Before starting all the steps, spread out the newspaper and put on gloves to protect yourself from splinters. The complexity of this stage lies in the fact that it is quite difficult to clean the light bulb. If you can’t do it the first time, connect a friend or brother to the cleaning light bulb. This is true if the terrarium is made by a fragile girl.
2.Pliers open upper part light bulbs, remove the contents with them, take out everything that was there very carefully, carefully collect the fragments so as not to get hurt.
3. Wipe the inside walls of the light bulb with a long cotton swab.
4. Next, we proceed to filling the light bulb. Take the sifted earth and sand. Use the second one as a drain. It is best if the amount of sand exceeds the amount of earth. This is necessary in order not to create an atmosphere of decay in a closed space. If there is no sand, you can use only the earth, but then you need to water it quite a bit.
5.Fill the light bulb first with sand (a little), add earth, small stones. Align, try to create a composition by connecting your imagination. The sand must first be washed and dried in the oven.
6. Next, run moss into the terrarium with tweezers or a long stick, “seat” it in sand and earth.
7. Now it's the turn of the plant. Gently plant it in the ground next to the moss, being careful not to damage the leaves and root.

8. Add tree bark, plastic figurines, or small shells to spice up your terrarium.
9. After the composition is built, water the plants with a syringe and close the lid tightly. The lid can be taken from a cone with valerian, or you can use nuts, pebbles in the form of a plug.

10. For stability, the lamp can be put on silicone legs, hung or glued to a stone.

It is better to put such a terrarium in a dark place where there are no direct sunlight. It can be placed on desk, windowsill, shelf. It will please the eye, it will be a great gift or a mini home ecosystem that lives by its own laws. The light bulb forms its own cycle of water, which, evaporating in a closed space without air, again turns into drops of liquid. These, in turn, feed the plants, which release carbon dioxide. Thus, life in the terrarium develops.