How to tie up tomatoes in the open field - the best ways. How to tie up tomatoes in the open field

The arrival of spring marks the beginning of the summer season, and amateur gardeners rush to the plots to grow a good and rich harvest. Not everyone gets it like that, because growing cultivated plants This is a huge job that requires certain knowledge and skills. need to carry out certain activities that are aimed not only at getting a crop, but also to preserve it.

Why you need to tie tomatoes

Every gardener knows that this plant needs to be tied up. On the open field early and undersized varieties can grow without support, but for growing in greenhouses choose tall plants bringing a bountiful harvest. As a result, under its weight, a thin stem can break. Some summer residents are of the opinion that the plant should take root and develop in vivo without human intervention. The creation of greenhouses is already an intervention, which means that you need to manage the process from beginning to end.

Tying up tomatoes is necessary for convenient pinching. Numerous stepchildren contribute to the growth of the plant, but the fruits in these places will not have time to ripen, but they will draw concentration on themselves nutrients, which will not be the best way to affect the quality and quantity of the crop. Tomatoes need to be stepsoned, but it is more convenient to do this when she is tied up. Fruit lying on the ground can be attacked by slugs and other pests. Late blight is no less dangerous - a disease caused by a pathogen whose habitat is the soil.

Tying tomatoes is also necessary because the plants should be watered under the root, avoiding moisture on the leaves and fruits. It is clear that this cannot be achieved if the tomatoes creep along the ground. If you do not comply with this condition, you can be left without a crop, and in this case even a strong root system. It is more convenient for the owner of the site to take care of the tied plant, because there is no need to bend down or work on your knees.

How to tie tomatoes

The material for this is needed so that it does not damage the thin fragile stem, does not contribute to the growth of bacteria and does not rot before the end of the summer season. Harsh thread, thin twine, fishing line and wire should be discarded immediately. The best option is ordinary cotton fabric, from which bedding is sewn. Having cut it into strips 3-4 cm wide, you can go to the greenhouse.

Read also:

Preparing strawberries for winter - when and how to spend

Many gardeners have appreciated the nylon stockings and tights: they are soft, do not overtighten and do not cut into the stem as they grow, in addition, they have a long service life and can be used for more than one season. After the harvest, experienced housewives wash the garters laundry soap and scalded with boiling water for better disinfection. But all these devices are yesterday. Today on sale you can find devices for garter and support of individual branches with plastic fruits. They are inexpensive and can be used continuously.

Agronomists who grow tomatoes in whole plantations and export them buy special garters. This device is somewhat similar to a stapler and allows you to wrap around the stem and support with a special tape that meets all the requirements for it. Such devices are also used by those involved in the cultivation of grapes.

Garter methods

There are several ways to tie up plants that give red juicy fruits. It is necessary to be guided by the power and height of the stem, as well as the variety of tomatoes.

Three ways:

• Easier to use individual pegs for each stem. Surely every summer resident will find trimmings of reinforcement, remnants of plastic pipes, metal rods. You can cut rails from firewood. The correct garter provides for the deepening of the stakes by 25-30 cm into the ground and at the same distance they should rise above each stem. After that, you can start wrapping the plant trunk with garter material. The ends must be crossed with a figure eight or twisted, and then fixed on a support. Additionally, you can support heavy brushes. This method is recommended to be used for garters not of all varieties, but only of medium height, moreover, such actions will have to be repeated more than once throughout the season.
• Tapestry method considered complex, but also reliable. You will need trellises - long stakes that must be driven into the ground at some distance from each other. Between them, in a horizontal plane, it is necessary to stretch a cable or cord, maintaining a step of 35-40 cm. As the plant grows, the stems and branches must be tucked into a stretched thread from one side or the other, guided by the principle of braiding. brushes with a large number fruits can be tied up or hung on hooks. This method is good because it allows you to do without pinching and ensure the growth of branches to increase the number of fruits. This can be achieved in a heated greenhouse, where the growth of the plant will continue after the onset of cold weather;
• Tapestry garter can be performed and linear way. All that needs to be done is to drive in stakes and stretch one row of wire from above. Fasten several long ropes on it, the ends of which must be fixed on the opposite stems. As it grows, it remains only to wrap the stem around the rope.

The garter is required to "hold" fragile plants and prevent them from breaking off during the growth period, as well as during fruiting.

For the garter you will need:

• Long bars (sticks, small pipes, thick slats, etc.);
• Short glazing beads (metal trim);
• Wire;
• Leg-split;
• A hammer.

We find a bed with tomatoes. Along the edges with a hammer, we drive one long beam into the ground. It must be strong and stable, as it will bear the weight of all the plants of the row and their fruits. Between these two bars, we fasten the wire along the entire length of the tomato row. We stretch so that the wire does not hang down. We cut the twine into segments equal to the length from the ground to the wire plus 20 cm (for tying). Gardeners recommend using twine folded in half to securely fasten the plant. To avoid "pulling" the plant, use short glazing beads. We tie one end of the thread to each short bead and stick it next to each tomato. We tie the free end of the twine to the wire with a slight stretch.

Carefully take the plant and wrap the tied twine around it. At the crown, we split the threads and fix the shoot between them.

A good harvest of tomatoes is the result of not only diligent and painstaking work, but also thoughtful. It is also necessary to take into account all the needs of culture and extend to it, so to speak, a helping hand. One of the varieties of help is a tomato garter in the open field.

You must have heard from experienced gardeners that gartering tomatoes is completely unnecessary. And partly they are right. Indeed, a garter is not always required. Determinant varieties, due to their short stature, practically do not need it. But indeterminate tomatoes with their rapid vertical growth need support.

However, let's sort through all the arguments in favor of the garter:

• it is necessary to tie up tomatoes of tall varieties in order to preserve the branches, to prevent them from breaking under the weight of the fruit;
• a tied bush will receive significantly more sun and fresh air, therefore - will bring more high yield;
• if the branches under the load of ripening fruits lie on the ground, they are defenseless against pest attacks, and this is a crop loss;
• even bushes with a strong stem in the open field may not withstand strong wind or a downpour without being tied up;
• an unattached plant spends a lot of energy trying to resist, and much less energy is left to fight diseases and pests;
• soil - a haven for late blight pathogens, tomatoes lying on the ground will almost certainly be affected by the disease;
• when watering tied tomatoes, you do not risk splashing fruits and leaves with water - this is also harmful to health and appearance tomatoes;
• caring for tomatoes, pinching, harvesting is much more convenient if the bushes are tied up.

Therefore, tomatoes are tied up not because it is customary. This is important for the sake of crop species, and for the sake of plant health, and for the convenience of the gardener.

Video "Why you need a garter"

From the video you will learn when and why you need a tomato garter.

Ways

All methods of tying tomatoes are aimed at achieving maximum yield without harming the plant. By trial and error, vegetable growers selected the most effective and gentle options:

• garter with stakes;
• on the trellis;
• cells;
• caps.

Each of them has its own advantages, each is quite effective. When choosing any of them, it is important to remember: when gartering, you cannot use materials that will have a detrimental effect on the well-being of tomatoes. And it would be a mistake to assume that the best way fit natural fabrics. In a greenhouse, perhaps. And when tying tomatoes in the open field, rags and ropes are completely impractical. Rain, wind, sunshine, temperature changes and changes in humidity will quickly lead to the fact that such a fabric simply decays.

Neither fishing line nor wire is suitable. They are strong, but too thin, you risk cutting the stems with them. So best option- synthetics, but not traumatic, rather soft and plastic.

And, of course, any garters can only be used for one season. Even if they are not damaged at all, they must be thrown away. Used garters for new seedlings may be carriers of the infection. So it's better not to risk it. Spending on new garters is cheap, and the risk of forfeiting the harvest is high.

stakes

Perhaps the most common garter of tomatoes in the open field is performed using stakes. This is a common, proven and simple method. The only “but” is that it is not very convenient to use for indeterminate varieties that can grow very, very tall. They will require stakes 2-2.5 m high.

What can be used as stakes? Any trimmings - wooden, metal, plastic, which can be found in any summer cottage. The peg must be well strengthened in the ground, taking care of both the strength and the safety of the root system. Optimal distance from the stem - 10 cm.

When preparing the dressing material, take care of its disinfection. Further, the garter is fixed on a peg, the stem of the bush is fixed at the very top. This is a free garter method, you do not need to grab the bush tightly. Wrap the stem several times and secure.

That's all. If there is a flaw in this method, it is only that the garter will have to be moved several times. After all, the bush is growing - accordingly, you need to move the "fortification" that maintains its stability. Pegs, as a rule, are used by summer residents who grow tomatoes for intra-family consumption, not in industrial quantities.

On the trellis

And how to tie up tomatoes correctly, if on your personal plot are there really many? In such cases, many rightly prefer the trellis. It is really more convenient to manage the plantation. In addition, there is no better way to tie up tall tomatoes.

Arranging a trellis is not difficult. Two pegs are needed for each bed. They are strengthened along the edges of the beds, and a wire is stretched between them. Ropes are tied to the wire - according to the number of tomato bushes. A bush is tied with each rope. As the plant begins to stretch upward, you will wrap it around the rope.

You can build a more solid trellis:

• supports are installed every 4 meters;
• in the upper part they are connected by a rail;
• the wire is stretched in three rows at a distance of 1 m;
• tie nylon threads across the wire at a distance of 20 cm - you will get a mesh.

Tapestries are reliable, including in the sense of preventing pest attacks: the earth will be at a distance even from the lowest leaves.

If you choose just such a structure, then you need to start with it. First, a trellis is erected, then tomatoes are planted near it. The tied bush is fixed first on the lowest row of wire. As the bushes grow, you will mount them higher and higher.

With this method, as with the stake, you do not need to tighten the ropes on the bushes too tightly.

Cells

If your tomato business is serious and for a long time, the most thorough way for you is how to tie up tomatoes in the open field. Do not be too lazy to build a cage for tomatoes. The work is worth it: it will serve you faithfully for a long time and will reliably protect plants planted in the open.

You need as many cells as you have bushes. Strong reinforcing wire is used as the starting material. From it are made vertical racks and installed near the bushes. Wire rings are put on the racks. We tie the stems to this frame with ropes.

You can also build a wooden cage. It looks like a gazebo without a roof. A wooden cage can be designed for several bushes. Plants are attached to wooden planks. It is practical, and even looks beautiful, it really looks like garden arbors twined with greenery.

Caps

The ingenuity of vegetable growers knows no bounds. Confirmation of this is a witty way of tying tomatoes, which is called caps. In fact, these structures look like pyramids, huts, wigwams. They are literally made from improvised means. Resourceful gardeners use sticks, branches, vines, wire, ropes.

The system is as follows: a plant is planted and a cap is built immediately above it. One cap can be enough for several bushes. The basis of the design is a vertical central stake. Three or four more pegs are driven in around it, in the upper part they converge, forming a "roof". The stakes are connected by several rows of wire. Inside the "house" - 3-4 bushes of tomatoes. Plant stems are attached to tiers of wire. The method is simple and economical, does not require practically any special costs, and at the same time is very effective.

From the video you will learn how to avoid mistakes when tying tomatoes.

Whatever amazing plants grow on their plots gardeners, they almost always make the traditional choice in favor of tomatoes. It is so nice to grow this crop from the very seed, to see how the fruits ripen and to try the very first reddened one right from the garden. There are short, medium and tall tomatoes. Most often, large-fruited, tall varieties are grown in the areas of our country, which require special care. The result is worth it, but to get it, you have to study the features of the garter of tall tomatoes.

Why tie tomatoes?

Not all varieties of tomatoes are able to "keep themselves" in the process of growth, and even more so the development of fruits. Under the mass of pouring tomatoes, the bushes begin to lean towards the ground and may even break. If injury does not occur, then the future crop is unlikely to benefit from lying on the ground - slugs and worms will enjoy an unexpected gift with pleasure.

There is one more circumstance - tomatoes must be watered under the root, and when they are in a supine position, this is impossible. It is undesirable to water the tops of a tomato, as well as pour water on the fruits lying on the ground. And in general, the path to the tops of the plant for any disease in this case is significantly reduced.

To avoid unpleasant moments, which can negatively affect the final result of all your work, tomatoes must be tied up. And now let's figure out how.

In conditions different from those in southern latitudes, tomato garter becomes a necessity.

General rules

In different climatic conditions, things are different. For example, in the southern latitudes, where tomatoes are grown on large plantations in the rays of the bright sun, it is not advisable to tie them up. The fruits lie on the ground, and the whole plant receives much more nutrients from the ground than in the case of a garter.

Residents of cooler regions are unlikely to think about such a method of growing. Periodic rains combined with not the most high temperatures(especially at night) are able to ruin all the efforts of summer residents with the hands of phytophthora or some other misfortunes like rot. That is why it is necessary to tie up here tomato bushes even short ones. It is necessary to completely exclude the contact of fruits with the ground.

Thanks to the garter, contact of the fruit with the ground and their decay is excluded.

An important condition is to exclude wires, fishing lines and thin ropes from the number of garters for tomato bushes. For this purpose, you need to use nylon tights and stockings. But this is ideal. Various straps and powerful ropes are also suitable, if only the garter is really strong, but gently holding the bush, without pinching the stem.

In order not to expose tomatoes to the risk of infection with last year's diseases, do not use old garter material.

Ways

The simplest of the known methods is a garter to a wooden or metal peg driven into the ground. For each bush, a peg is driven in next to it, and the most different materials- nylon stockings, cord from household appliances, ribbons and straps. The bush is tied up near the top of the stem.

The advantage of this method is that garter materials can be used every year. The downside, as already mentioned, is the possible infection of plants with diseases left on the garter materials from last year. But here there is a way out - disinfection of all materials before new use.

An important point is not to pull the stem with garter materials, so as not to damage it and not subject the plant to death. Since the bush will grow further, it is necessary to equip it with new garters or raise the old one as it grows.

Let's complicate the garter a little by applying tapestries. We put them at some distance from each other and stretch the wire horizontally between them. Between the rows of wire we make a distance of 45 cm. Actually, rows of bushes will be tied to these wires.

A metal mesh can serve as a good guide for tomato bushes, only its cells should be large

The third way is called linear. In the middle between the stakes, a wire is pulled, then a rope is pulled to it over each tomato, one of its ends is attached to the stem of the bush.

The fourth way - we make our own cage for each bush. The cage is made of wire or metal. We bend the circles that will be connected by rods. We plant a tomato bush, drop a cage to a depth of 15 cm and tie it with a rope.

The next way is to use pyramidal caps made of four rods each. Each cap holds four bushes and, when planting, it is dug in 25 cm, and the tops of the rods are connected with wire.

The sixth method involves the use of hooks and wire. On both sides of the tomato row, stakes are dug in, between which a cable is pulled. After 30 cm, a fishing line or twine is pulled from it, to which rings and hooks are attached. Hooks will catch the stems of tomato bushes.

Video: an overview of tomato garter techniques

Photo gallery of ways

Tying bushes with hooks and rings Tying a bush to a peg Tying bushes to a stretched twine Tying a bush with a cage

From the correct garter tomato depends on how strong and resistant to impact weather conditions they will grow up. A competent garter is not a minor activity that can be neglected, but an important event that affects the quality of the future harvest.

From this article you will learn in what ways you can tie up tomatoes in the greenhouse and in the garden.

To grow vegetables at home, you need to know all the subtleties about each vegetable separately. In this article, we will learn how to tie up tomato bushes, and whether it should be done.

What are the modern methods, tomato garter options, and what can be used for a garter?

Tie tomatoes to a trellis

We have already planted tomatoes, and they are rooted, so that there is something to tie the bushes to, you need to drive wooden pegs or metal rods into the ground. Methods for tying tall tomatoes there are:

• Individual stake for each plant, the height of the length of the plant, plus 25-30 cm for driving into the ground
• To the tapestries
• To linear trellis
• Building a cage for each plant
• Construction of pyramidal or triangular caps for 3 or 4 plants at once
• Fastening the plant with hooks and rings to the wire

We installed pegs or other devices in the ground, we will tie plants to them. Suitable for garter:

• Strips of fabric, 3-4 cm wide
• Nylon tights or stockings
• soft rope
• Plastic clips

Note. All thin and hard garter materials are not suitable - they can crash into the branches and trunk of the plant, and destroy it.

Cannot be applied:

• Lescu
• wire
• Threads
• Thin and hard rope

Important. If you are using last year's garters, then before using them, you need to wash them with laundry soap to kill bacteria.

How to buy pegs, fiberglass reinforcement, plastic clips, a stapler, a tomato garter device in Aliexpress: links to the catalog

If you do not have pegs or binding material, you can buy them at any time of the day in the Aliexpress online store, and. There wide range of goods for horticultural work.

When and why do you need to tie up tomatoes in a greenhouse, open field?

To get a high yield of tomatoes, you need to learn how to properly care for them, including tying them up. Tie tall varieties, and low varieties with bountiful harvest. They are most often planted in greenhouses, less in open ground.

Experienced gardeners advise tying up all low-growing varieties, because this way you can get a much larger harvest.

Need a garter of tomatoes:

• To make it easier for plants to hold the weight of the fruit, otherwise they may break.
• Tall tomatoes with fruits, if not tied up, will lie on the ground and rot or be eaten by pests, and to prevent this from happening they need to be tied up.
• Tied plants are easier to stepson (remove additional shoots that may have fruits).
• It is undesirable to pour water on the leaves and fruits that have set, and therefore you need to water the plants closer to the root, and this is easy to do with tied tomatoes.
• Fluffing the soil around the tomatoes is also easier if the plants are tied up.
• A plant located vertically receives more sun and air, and therefore the fruits ripen faster.

Important. We begin to tie tomatoes 2-3 weeks after planting seedlings in open ground or a greenhouse.

How to properly tie tall tomatoes in a greenhouse and open field: 5 ways, rules, tips for beginners

Tying tall tomatoes

Some varieties of tall tomatoes grow up to 1.5-2 m tall. The same height you need to pick up stakes. In open ground, plants of this height are planted at a distance of approximately 1 m. And they need to be tied up as they grow, 3-6 times per season.

There are 5 main ways tying tall tomatoes:

1. Tying up to the pegs plants with cloth strips or soft rope.
2. construction wire frame, in the form of a cone, around the plant. The method is expensive if there are a lot of tomato bushes.
3. Tying tomatoes to the horizontal trellis. This is done like this: we drive high stakes along the edges of the bed with tomatoes. We stretch the wire between the stakes, starting from the bottom and to the top, every 30 cm. First, we tie the plants to the lower wire, then, when they grow up, higher.
4. Tying tomatoes to vertical trellis. This method suitable exclusively for greenhouses. We stretch the wire along the ceiling of the greenhouse, and the tomatoes are tied to it.
5. Tying tomatoes to the grid. Installed between two pillars metal mesh and tie tomato bushes to it.

In the garden, you can tie tomatoes by all methods except 4, and in the greenhouse you can use 3 and 4 tying methods.

How to properly tie undersized tomatoes in a greenhouse and open field: 5 ways, rules, tips for beginners

Low-growing tomatoes in the garden can be tied, or you can leave them to grow without support. Each case has its pros and cons. If the plants grow without support, they will additionally take root, and the fruits on the ground can rot from moisture. So, experienced vegetable growers are advised to tie up and undersized plants. This can be done by the following ways:

1. Most popular for undersized tomato is tying up to the posts, about 1 m high. We drive the columns into the ground 5-10 cm from the plant. We wrap the plant and the column with a strip of fabric or a soft rope in the form of a figure eight, and tie the ends of the rope to the column, like a bow. The rope should be tied loosely and not cut into the plant.
2. Bush tying to a low trellis. On the edges of the beds with tomatoes we hammer in low stakes, about 1 m high. We attach a thick wire on top of the stakes. We tie each bush to a wire with a soft rope.
3. Devices in the form square cap. Around 4 bushes of tomatoes we hammer 4 low pegs, which we wrap with wire: at the bottom, in the middle and at the top. The wire will support the bushes and then the fruits.
4. Devices in the form triangular cap. Near each bush we hammer pegs into the ground, wrap the wire around them in several places. Bushes are obtained in the middle of the triangle.
5. Net, about 1 m high for tying tomatoes. At the beginning and end of the beds with tomatoes, we score 2 columns. We attach a grid to them, to which we tie bushes of tomatoes.

Video: How to tie up tomatoes? The easy way with a plastic bottle

How to properly tie tomatoes to pegs in a greenhouse and open field: a description of the method

In the garden for tying tomatoes, first we install pegs for each bush. They can be wooden or metal. We hammer the peg into the ground 5-10 cm from the plant. He must stand firm. With a soft strip of cloth or a soft rope, we wrap the peg and the plant with a figure eight several times, and tie it to the peg, without pulling the plant to it, but so that there is free space and the plant can grow.

Video: How to tie tomatoes in the open field

How to tie up tomatoes on a trellis?

Tall tomatoes are tied to a trellis

We install trellises for tying tall tomatoes in a greenhouse or garden. This is done like this:

1. Along the beds with tomatoes into the ground, we hammer iron stakes, about 2 m high, after 1.0-1.5 m.
2. Between the stakes, from the very bottom to the top, at a distance of 35-40 cm, we stretch a thick wire.
3. We tie each plant with a soft garter to the wire.
4. In addition, we fill the branches with wire as they grow.
5. When the fruits grow up, we also tie them to the wire, or hook them to the wire.

Using this method, you can leave the plant and additional branches, the support is reliable and will withstand everything, and besides, the harvest will be larger, and it’s not scary in the greenhouse if frosts begin.

How to tie tomatoes in a linear way?

Tomatoes tied to linear trellises

The linear method is used in the greenhouse and in the garden:

1. In a straight line along the beds with tall tomatoes, we hammer stakes 2 m high.
2. We stretch a strong wire at the top between the stakes.
3. We tie one end of a long soft garter on the plant at the very root, we tie the other end of the garter at the top of the wire.
4. The growing branches are tucked into the garter and directed upwards.
5. We also tie large fruits to the wire.

How to tie tomatoes on hooks and chains?

Tomato garter on hooks

The method of tying tall tomatoes on hooks is similar to tying on trellises. On the edges of the beds with tomatoes we dig in 2 metal stakes, about 2 m high. We stretch the wire between the stakes. We tie a fishing line with a loop to the wire above each bush, we hook hooks on it. Bicycle camera cut into thin rings. We thread the ring under the twig of the plant, bend it in half, and hook it to the fishing line with a hook. Hooks can be made from aluminum wire or bought from an online store and.

How to tie up tomatoes in a cage?

Garter of tomatoes in a cage

One way to tie tall tomatoes is to build a cage for each tomato. We make a cage from 4 pegs, wooden or metal ones are suitable, according to the height of the plant. We hammer the pegs around the plant, and connect them together with wire in 3-5 rows per different height, to which the plant is attached with a soft rope. We fasten the grown plant above the wire.

How to tie up tomatoes without stakes?

Tying tomatoes without stakes

In this method of tying up tomatoes, stakes are still needed, but not for every bush. This is done like this:

1. We plant tomatoes in 1 row.
2. On both sides of the row with tomatoes we hammer in 3 pegs, the middle peg on each side is higher, low pegs along the edges.
3. We connect the pegs around with a soft rope, it will be like a restriction for the bushes.
4. In addition, we also connect high pegs with a rope or wire at several levels to tie tomatoes to it.

How to properly tie tomatoes with a figure eight in a polycarbonate greenhouse?

Tying tomatoes in a polycarbonate greenhouse

The polycarbonate greenhouse is high, it is heated, and it is possible to grow tomatoes belonging to tall varieties in it all winter. You can tie them to trellises in a simple way- in the form of a figure eight or, as the people say, a bow. First you need to tie the rope to the plant loosely so that there is free space near the trunk, and then tie the rope to the wire at the top without pulling it.

A polycarbonate greenhouse is large, and there is a lot of work in it; to simplify work, you can purchase it in an online store or a special device similar to a stapler. The operation of the device consists in tying the plant and wire with a special tape, and fixing them together. So you can quickly tie up all the branches in a short time.

What is the easiest method to tie a tomato?

The easiest way to tie tomatoes - to a peg

The simplest method of tying tomatoes is a peg for each tomato. It can be wood, metal or a piece of pipe. The height of the peg should be at least as high as the tomato when it is fully grown, and about 30 cm extra for driving into the ground.
We hammer the peg 5-10 cm further from the tomato bush. Then we lightly wrap the garter around the plant, twist its ends and attach it to the support. When the tomato grows up, we tie it higher with another ribbon, or remove the one that was and tie it higher.

This peg and garter method is only suitable for medium-sized tomatoes, a plant belonging to tall tomatoes may not withstand such a peg, and the structure will collapse along with the plant.

How the Chinese tie up tomatoes: a description of the method

The Chinese have bred many drought-resistant tomato varieties that have proven themselves well with us. The Chinese technology of growing tomatoes was also liked by those gardeners who came across it. The tying of tomatoes by the Chinese is also very original and fast. It consists of the following steps:

1. We plant tomatoes in a row with a distance of about 20-30 cm between them.
2. We hammer pegs between the bushes of tomatoes.
3. We place a babin with a rope in our backpack.
4. We take 1 peg, drill a hole at the end of it of such a size that the rope can move freely.
5. We pass the rope through the hole in the peg that we have in our hand.
6. On the first peg, standing at the beginning of the row, 10-20 cm from the bottom, we tie the end of a soft rope.
7. Further, the plants will be tied up automatically: we go with the usual step and direct the stick with the rope first to the bush, then to the peg, wrap it around; we make movements with a stick, as if weaving a basket. So we reach the end of the row of tomatoes.
8. Then we return, but now the rope should lie on the other side of the bush.

Video: Garter of tomatoes. Pro

How to tie "Bull's Heart" tomatoes in a greenhouse and open field: features, tips

Variety of tomatoes bull heart»

Tomatoes "Bull's heart" are tall. Seedlings, in a garden or greenhouse, we plant them at a distance of about 0.5 m, one plant from another. It is good to tie them on the trellis with a soft rope. A thick wire can be used as a trellis. The wire is attached to two iron stakes. We tie a rope to each bush with one end, we tie the other end of the rope at the top to the wire.

When the plants grow up and fruits begin to set, they also need to be tied to the trellis, otherwise the plants may not be able to withstand the heavy weight of the fruit, because one tomato of this variety sometimes weighs up to 0.5 kg.

How to tie up cherry tomatoes in a greenhouse and open field: features, tips

Cherry tomatoes

Cherry tomatoes can be grown in the garden, and greenhouse. Cherry bushes are low, medium and high in height, depending on the variety. Low-growing and medium-sized cherry trees may not be tied up, but cherry varieties related to tall ones can reach 2 m in height.

When planted in a greenhouse or garden, cherry seedlings reach 30 cm in height, you need to install supports. Metal rods or, if there are a lot of plants, trellises are suitable for supports. Cherries continue to grow, and they need to be tied up higher and higher.

In addition to eating them, you can decorate your balcony with cherry tomatoes if you buy cherry tomatoes. decorative variety. We plant such tomatoes on the balcony in a hanging basket, when the fruits are tied, they will hang down beautifully, and so that the branches do not break under the weight of the fruits, we stretch the wire along the balcony and attach the branches to it.

How to make sticks, supports for a tomato garter, with your own hands?

Pegs for garter tomatoes can be made by yourself from the following materials:

• Thick tree branches
• wooden planks
• Long wooden planks
• metal bars
• Long pieces of metal pipes
• Strong plastic sticks

Stakes made of wood, to make it easier to hammer into the ground, we trim with an ax on one side. Metal bars and pipes are harder to install, it requires skill.

How to process pegs for a tomato garter?

Tall wooden sticks are suitable for pegs. So that they do not rot by the end of the season, they need to be burned a little over a fire or in an oven. Pegs processed in this way will be suitable for tying tomatoes for several years.

Do I need to tie the tomato brushes?

Tied brush tomato

Tomatoes large varieties, such as "Bull's Heart" must be tied with a rope or hooked, otherwise the branch may not withstand and break. Some gardeners make wire hooks themselves, and hook them to a trellis by a branch. But you can also order ready-made hooks in the online store, or.

If you do not tie up tomatoes: what will happen?

Tied tomato bushes bear fruit better

You can not tie up tomatoes in areas with a hot climate, and then undersized. There, the fruits lie on the ground, the days and nights in the southern countries are warm, they quickly ripen, and do not have time to rot. But tall tomatoes will have to be tied up in subtropical countries.

And in temperate latitudes, where it is often cold at night for tomatoes, lying on the ground, they rot, they are eaten by pests, and so you can lose the entire crop. Therefore, you need to tie up both low and tall tomatoes.

So, we learned how to tie up low and tall tomatoes, in the open field, and in the greenhouse.

Video: We tie tomatoes! How to properly tie tomatoes in a greenhouse and garter errors