We clean the kettle from scale with available means. Descaling a kettle with home remedies

Scale is formed due to the content of metal salts in tap water, settling on the bottom and inner walls of ordinary kettles or electric heating element.

The use of tea or coffee, generously seasoned with mineral deposits, threatens with diseases of the kidneys, joints and bones.

A dense layer of scale leads to a long heating of water, and in electric kettles - to breakage of the heating coil.

The rate of plaque formation depends on the hardness of the water, but even filtration will not eliminate the need to periodically descale the kettle.

How to descale the kettle: the necessary tools

To rid the kettle of scale and extend its service life, you can use it as special preparations from the store household chemicals and home remedies:

• citric acid or lemons;

  sweet soda;

  pickle from canned cucumbers or tomatoes;

  peel of apples, pears or potatoes.

Soda softens limescale, and the rest of the products contain acids, which scale is afraid of. For cleaning, you will also need a soft brush, sponge or brush. Do not use metal washcloths that damage dishes to speed up the process.

How to descale the kettle: method 1 - traditional

The easiest way to remove scale from the kettle is with the help of improvised means that are in every kitchen: lemon or acetic acid, soda, or combinations thereof.

Vinegar cleaning

Manufacturers do not recommend cleaning electric, enameled and aluminum kettles with vinegar; the product is suitable for stainless steel dishes with old deposits.

With a small layer of lime, fill 2/3 of the kettle with water, and the remaining 1/3 with 9% vinegar. Bring the solution to a boil over low heat, remove the kettle from the heat and set it aside for 1-3 hours to loosen the scale. If the bottom and walls of the dishes are covered with a thick and dense crust of deposits, prepare a solution at the rate of ½ cup of vinegar per 1 liter of water, pour it into the kettle, put it on a small fire, wait for it to boil and boil for another 10-30 minutes - depending on the volume of the vessel.

After cooling, thoroughly rinse the kettle with a soft sponge, removing the remaining scale, boil it 1-2 times with clean water and rinse the container to get rid of traces of vinegar.

Cleansing with citric acid

A gentle tool will help get rid of scale on any kettle. To remove dense layers of lime, boil the kettle with an acid solution (10-15 g of 1 liter of water), turn it off immediately after boiling and cool it for 30-60 minutes - during this time the scale will dissolve or soften. Then drain the liquid, remove the remaining deposits with a sponge, boil a container of clean water and rinse thoroughly. If it was not possible to cope with chronic scale on the first attempt, repeat the procedure.

In order not to expose the kettle to boiling with acid, it is enough to clean it monthly without heating: dilute the acid with water, pour it into a container and drain the solution after a few hours - a small coating will disappear without a trace.

Soda cleaning

Ordinary baking soda or soda ash will help restore original cleanliness to any kettles, including electric ones.

Option 1. Fill the dishes with water, pour 1 tbsp. soda, boil and hold for half an hour on low heat. Cool, drain the solution and wash the kettle, then refill it with water and boil, removing the remaining soda. After that, rinse the container again.

Option 2. Pour 1-2 tbsp into the water boiling in the kettle. baking soda and immediately turn off the heat. After 1-2 hours, remove softened mineral deposits from the dishes, boil them with clean water and rinse again.

Cleaning old scale

Option 1. Moisten a sponge with vinegar, dip it in soda and rub the resulting slurry into surfaces covered with a layer of scale. When vinegar is combined with soda, a reaction will occur that destroys deposits; all that remains is to rinse and rinse the kettle. If the layers are thick, cleaning will need to be repeated.

Option 2. Suitable for the most neglected kettles with a thick layer of scale, but not applicable for electric kettles due to excessive aggressiveness. Cleansing is done in three steps:

1. Pour water into the container, pour 1 tbsp. l. soda, boil, set aside for 10-20 minutes, drain the solution.

2. Refill with water, add 1-2 tbsp. citric acid, boil the solution for half an hour over low heat, drain.

3. Pour water into the kettle again, add 1/2 cup of vinegar there, boil for another half an hour, drain the liquid.

Most of scale after such a powerful attack will come off by itself, loose residues can be easily removed with a simple sponge. Then be sure to rinse the kettle, boil clean water in it 3-4 times and rinse the dishes.

How to descale the kettle: method 2 - “delicious”

Adherents of safe natural products will appreciate the method of descaling using potato, pear or apple peels containing organic acids. Cleanings need to be washed, put in a kettle, pour water and boil the liquid. After boiling, set aside the teapot with the peel for 1-2 hours, and then rinse the dishes well. The product is suitable for removing light scale deposits.

Cucumber or tomato pickle perfectly eliminates lime deposits due to the content of citric acid or vinegar. The brine must be poured into the kettle, boiled, cooled, washed and rinsed thoroughly to remove the smell of preservation. An additional bonus of the method is the removal of rust from inner surface vessel.

Lemon fights well with scale. Sour fruit should be cut into quarters, put them in a kettle, pour water, put the dishes on a small fire and boil the solution for 10-15 minutes after boiling. If the scale is not softened enough, repeat the procedure, and then rinse the kettle and rinse big amount water.

For efficient removal scale in the kettle, you can use sweet soda.

Open a drink bottle to release gases, then pour 0.5-1 liter of liquid into the kettle, boil, let cool and rinse the container thoroughly. With a small layer of deposits, you can do without boiling - just fill the kettle with soda to dissolve the plaque, and wash it after a few hours. The cleaning effect is based on the content of citric and phosphoric acid in the drink. Choose a clear soda, such as 7UP, otherwise you will have to remove colored spots from Coca-Cola or Fanta from the surface of the dishes.

How to descale the kettle: method 3 - chemical

The destruction of scale with household chemicals is achieved by the citric, adipic or sulfamic acids included in their composition. Special products are available in the form of liquids, powders or tablets, used according to the instructions. General scheme use - the solution with the cleaning agent is boiled in a kettle for 30-40 minutes, then drained. Softened scale is easily removed, and after cleaning, boil clean water 2-3 more times in the kettle to remove it. chemical substances.

Application efficiency store funds from scale is comparable to the action of vinegar and citric acid, but the latter are much more economical.

How to clean the kettle from scale and not spoil it

Even if the kettle is covered with a thick layer of plaque, do not scrape it with sharp objects, do not use hard brushes and metal scourers for cleaning - such cruel way damages dishes.

For gentle and effective descaling, wash the kettle thoroughly from the inside, and then use home remedies or chemical reagents for dissolving or loosening the lime "fur coat". After cleaning, be sure to wash the kettle with a sponge or soft brush, boil water in it a couple of times and rinse the dishes again to avoid poisoning.

The frequency of descaling the kettle depends on the hardness of the water used, but try not to start the process - with each boil, the crust of plaque becomes more durable and thicker. Preventive care will help minimize its formation:

rinsing after each boil and daily wash teapot with a sponge;

the use of filtered water, each time fresh - repeated boiling increases the precipitation of salts;

draining water from the kettle at night or during a long "downtime".

The choice of ways to clean the kettle from scale is quite large, and home remedies are as effective as store-bought ones. The main thing is not to forget to repeat the procedure regularly.

A beautiful teapot cooker always pleasing to the eye. But it can only be beautiful if it is pure. Clean not only on the outer walls, but also inside the container. After all, it's no secret to anyone that scale from water can ruin not only attractive appearance dishes, but also the taste of the drink prepared in it. Many recommend purchasing a water filtration system, after which scale will not form on the dishes. I would like to believe in this miracle, but no - it does not work. Filters cannot independently cope with the substances that are responsible for the formation of lime. Sooner or later, you will still have to see such a sad picture on the inner walls of your favorite kettle or on the heating element of the boiler, which will be covered with a dirty yellow coating.

Clean kettle in the kitchen or how to remove scale in the kettle

But do not be upset, because you can remove lime from the kettle yourself, without resorting to the effects of chemicals. Moreover, regular cleaning procedures will help you forget that unpleasant limescale appearance, thanks to which you have already managed to throw away more than one of your favorite sets of dishes. Before we learn how to remove scale in a kettle at home, let's try to figure out why it needs to be dealt with.

1. Limescale gives our kitchen utensils ugly appearance. Moreover, in the process of preparing or boiling water, pieces of plaque peel off from the walls of the kettle and fall into the mug when preparing coffee or tea. Agree that drinking such a "fragrant drink with thick gray color' is not very pleasant. Moreover, this garbage enters the stomach, which can adversely affect the function of the gastrointestinal tract.
2. The second reason that obliges to clean the walls of the kettle from plaque is the delay in the heat transfer process. And if this is not such an important problem for an enameled teapot, then Electric kettle in such "conditions" may simply refuse to work. That is, burn!

Today on store shelves there are many excellent and effective chemicals available that can overcome limescale in a matter of minutes.

But everything is not as simple as the contents of the liner annotation promise the consumer. And it’s not at all about the quality of household chemicals, but when purchasing such a cleaning agent, you need to pay attention to the following parameters:

• composition of tap water
• thickness of the limescale layer,
• the material from which the dishes are made,
• dosage compliance, etc.

But back to the question of how to remove scale in the kettle on your own with improvised means that are completely harmless to health and cannot damage the surface of the dishes.

Safe means in the fight against limescale

The following improvised means will help us to cope with scale in the kettle:

1. Lemon acid.
2. Baking soda.
3. Apple vinegar.
4. Peel of an apple or lemon.
5. Pickle brine.
6. Drinks Sprite, Coca-Cola, Fanta.

As you can see, our favorite fizzy drinks have gained a high honor, and with "proud" have joined the ranks of home and safe cleaning products.

Option 1

Scale in an electric kettle - remove with citric acid

So, scale in the kettle - how to remove limescale with citric acid? I would like to immediately note that such a tool as citric acid is suitable for cleaning both an enameled kettle and an electric kettle, the walls of which are made of plastic or glass. Due to the gentle effect of the acid, it is possible to easily cope with small raids. Scale in an electric kettle, first of all, is superimposed in layers on heating elements, so it must always be dealt with in a timely manner. Moreover, citric acid will help with this.

Pour about 500 ml of water into the container of the kettle and bring it to a boil. As soon as the kettle turns off, you need to take 2 tablespoons of dry citric acid and dip it into boiling water. Close the lid of the kettle and wait until the water in the kettle has completely cooled down. Attention! The reaction of citric acid and water forms a kind of "hiss" and "foam". Therefore, when using acid, be careful not to let boiling water get on the skin.

After 1 hour, pour the citric acid water down the sink and rinse the kettle thoroughly. If the limescale was not old, then after such a procedure it will leave the walls and bottom of the kettle on its own. Otherwise, you will either have to repeat the procedure again, or make a little effort and remove the remaining scale with a washcloth for washing dishes.

Option 2

Lemon peel in the fight against scale in the kettle

Can you guess how to remove scale with lemon slices? By the way, this method is less effective and can compete with those who have learned how to remove scale in the kettle with citric acid. So, cut the peel of a lemon or the whole citrus into pieces and put them in a kettle filled with water. Let's boil it.

When the water is completely cool, without removing the lemon pieces, rinse the kettle tank with a dishwashing sponge. As a result, we get perfectly clean inner walls and bottom of teapots. Housewives often use this washing method if they need to remove scale from an electric kettle.

Option 3

Apple Cider Vinegar - An ardent enemy of limescale

Apple cider vinegar is found in every kitchen. And this is wonderful, because nothing can cope with the old scale on the walls of metal, enamel and glass teapots. Naturally, it can also be used to clean electric kettles, but manufacturers do not recommend doing this. We will be obedient and listen to the manufacturer's recommendations, which will extend the life of our favorite electric kettle.

So, scale in the kettle - how to remove old lime deposits with vinegar? Fill the kettle with water and bring it to a boil. Then add a glass apple cider vinegar, stir with a spoon and leave overnight. In the morning a surprise awaits us - the entire plaque crumbled from the walls in sheets. It remains only to thoroughly wash the kettle with clean water to thoroughly remove all residues of vinegar and plaque. The container is clean, so we can continue to enjoy the taste fragrant tea, cooked in our favorite kitchen kettle.

Option 4

How to remove scale in an enameled kettle

It should be noted that enamelware is afraid of exposure to aggressive substances. And if your favorite enameled teapot is covered with plaque, then it’s not worth the risk, but it’s better to learn about a more gentle method and substances that will allow it to return to its former beautiful view. Let's find out how to remove scale in an enameled kettle? The task is not an easy one, because you want to clean the walls and bottom of the kettle as much as possible, while not harming it with chemical aggressive agents. But a familiar remedy will rush to our aid, and we will try to remove scale in the kettle with soda. Yes, yes, ordinary baking soda, from which we will skillfully prepare a soda solution. By the way, this method is suitable not only for enameled kettles, but also for stainless steel, aluminum and electric kettles.

So, we need to prepare a tablespoon of soda ash and 0.5 liters of water.

Please note that proportions are approximate. In our case, the main thing is that the solution can cover all the limescale on the walls of the dishes. So, we prepared a soda solution and poured the container of the kettle with it. Put a container on the stove and boil water. Then we continue to simmer the solution in the kettle for another 1 hour. Remove from the stove and let the water cool - the limescale should leave the walls of the kettle on its own. If not, then you can help him by cleaning the walls with a dishwashing sponge. Now the plaque, in any case, has already become soft, and getting rid of it will no longer be difficult.

Option 5

Clean the walls of the stainless steel teapot

We understand that now many are waiting for how to remove scale in a stainless steel kettle. After all, such teapots were at the peak of popularity at one time and have already become our favorite for many of us. But to act on them with aggressive means means to spoil their appearance. But getting rid of scale with detergents is very difficult, and not possible.

Don't worry. In this case, skilled housewives stocked up with another way, and they know perfectly well how to remove scale in a kettle at home in the most gentle way - potato peels or apple peel. By the way, this method is ideal as preventive measure for any type of dishes, which will help to keep its walls and bottom clean for a long time.

So, you will need potato or apple peels, which we carefully put in the kettle. Pour in boiling water and bring to a boil. Set the kettle aside and let the water cool completely. As a result of such exposure, the plaque becomes soft, and it can be easily cleaned with a regular kitchen sponge designed for washing dishes. Well, here we have already sorted out with you the most effective and available methods that will help you deal with scale on the kettle.

Option 6

But besides this, I would like to mention our favorite carbonated drinks, which equally effectively cope with scale, dissolve lime layers and rust in sewer pipes.

Coca Cola, Fanta, Sprite - the perfect remedy for scale

Meet Coca-Cola!!! By the way, it is successfully replaced by Sprite and Fanta. That is why, if you are descaling a white teapot, we recommend taking a colorless drink. In our case, Sprite. As you understand, having removed the plaque with Coca-Cola or Fanta, as a result, you will have to deal with the colored plaque that this “noble drink” will leave behind.

So, we clean the electric kettle with a carbonated drink. Before proceeding with the procedure, you must carefully remove all gases from the drink. To do this, we will open the bottle in advance and leave it aside for a few hours. It is best to leave it overnight and start the cleansing process in the morning.

Pour the drink into the reservoir of the kettle, bring to a boil and leave the water to cool completely. You will be surprised, but the tank will be clean, and you will only find traces of plaque on the bottom of the tank, which you can remove with a light movement of a kitchen sponge.

As you can see, you can easily get rid of plaque on the walls and bottom of the kettle by resorting to homemade and completely safe means for help. As a result, the dishes in the kitchen will always be clean and tidy.

Look inside your favorite pot for boiling water for tea and you will see white streaks, deposits on the walls. Any electric kettle will accumulate a layer of lime over time if it is not regularly cleaned. This plaque contains hard deposits of minerals when hard water is used, which does not pass through the filter. "Crust" on the walls impairs the operation of heating devices, is harmful to health. After reading the material, you will learn how to remove salt from the inside of electric and other tea utensils using traditional folk remedies.

How to remove scale in a kettle

To clean it from mineral plaque, especially if this dish is used daily, it is imperative to systematically. The formation of deposits depends on the quality of the water used: if it is hard, then a layer of mineral plaque and lime will form on the walls much faster. How to wash the kettle from scale? There are various tried and tested home tricks to help remove these mineral deposits. Baking soda, vinegar, cola, citric acid, household products work to eliminate this problem.

How to clean a kettle with citric acid

How to remove scale in a kettle using citric acid? It cleans metal brewing, plastic, glass products. In order to clean, you will need to boil half a liter of water, adding 2 large tablespoons of citric acid there after boiling. Wait a couple of hours for the water to cool. Removal of the "crust" on the walls, cleaning will occur on their own. It rarely takes a little help with this solution to successfully fight plaque. After that, boil clean water again inside, drain it. Your tea will become tastier and your health will not suffer.

Descaler

How to clean the kettle from scale using specialized cleaning products from the household chemicals departments of stores and supermarkets? With their help, you can wash a product made of stainless steel or any other material. To find out if a cleanser is right for you, read the label carefully before buying. After purchasing the product, you only need to strictly follow the attached instructions. As a rule, you need to boil water, add powder, cool this solution, drain it and wash it well with clean water, boiling it a couple of times.

Vinegar

Try an effective, inexpensive way to descale your kettle with vinegar. It is aggressive, so the method is suitable for removing heavy mineral deposits. It is used for tea utensils made of glass, plastic, metal. To carry out the removal of plaque, you will need to pour half a liter of water, boil, add a glass of 9% vinegar, leave for an hour so that the process goes arbitrarily. Sometimes you need to walk along the walls with a sponge. Important condition- thoroughly rinse the heating device from vinegar after the procedure, then boil it a couple of times with clean water.

soda

clean enamel teapot, aluminum cookware soda will help folk remedy from scale, which is easy to find in retail and costs a penny. This will require 500 ml of water and a tablespoon of soda ash. If the mixture does not cover all the limescale, then increase the amount of water with soda. Bring the resulting solution to a boil and cook it over low heat for half an hour. To enhance the effect, leave the water with soda to cool there for a couple of hours. If necessary, rub the excess with a sponge, rinse the dishes well and boil clean filtered water there.

How to descale a Coca-Cola kettle

Try in practice another extraordinary way to fight against mineral plaque, which will require a strong carbonated drink containing citric acid. This option is suitable only for electric heaters. How to clean the kettle from scale, just adding Coca-Cola? First of all, you need to release gases from the drink, leaving it alone with the lid ajar for an hour, pour it into a bowl and boil. Leave to cool for a while, if necessary, rub with a sponge or hard washcloth. Drain the liquid, rinse with clean water.

Video on how to get rid of scale in an electric kettle

The energetic and very nice presenter of the video will popularly talk about the simplest but most effective measures for cleaning electric cookware in order to forget about plaque for a long time. How to remove scale in an electric kettle? If you have such a heating device for making tea, then this video will help. After watching the video, you will understand which tool is suitable for your case. Spend just a couple of minutes of your personal time, but you will understand which is better - soda, vinegar or lemon?

Even if you use filtered or bottled water, pouring it into a kettle with a cleaning system, sooner or later you will have to face such a problem as scale in the kettle. In this article, we have collected the most effective ways combat it, as fast and harmless to technology as possible.

What is scale and why it must be removed

Sometimes on the Internet you can find the opinion that it is not necessary to remove scale - it carries a purely visual defect, which plays a role only in glass teapots. Such a statement is fundamentally wrong.

First of all, you need to figure out how scale appears. Most often, for boiling, ordinary running water which contains quite a lot of impurities. However, they are in both bottled and filtered water - though in smaller quantities.

Most of them are various salts, which, when heated, are separated into carbon dioxide and a solid sodium precipitate that remains on the walls of the dishes. At the same time, it is not washed off with ordinary water and tends to accumulate.

The problem of scale is not only in an unaesthetic appearance

Such a coating harms your kettle: it worsens the thermal conductivity, which means that it will take more time to heat up. Because of this, in ordinary kettles, the ceramic coating layer, if any, gradually becomes thinner, and in electric kettles, the heating elements fail faster.

However, this factor can be considered rather secondary. The main reason why you should deal with scale is potential harm for health. Since plaque consists of salt deposits, insoluble metals and a variety of harmful impurities, including chlorine, the sediment that enters the body can contribute to the development of various diseases. The mixture can provoke arthritis, gout, osteochondrosis, kidney stones or toxicological poisoning.

That is why you need to clean the kettle from plaque regularly. In the following sections, we'll show you how to do it right.

How often should the kettle be descaled?

The answer to this question depends on two factors - the type of heater and the quality of the water you use.

Glass teapots need to be cleaned almost every week: any coating, even the thinnest, is noticeable on a transparent surface. But metal or ceramic can be cleaned of plaque about once a month - as it gets dirty.

In addition, kettles with an open heating coil need cleaning more than those in which the heating element is closed. Otherwise, the device will fail faster.

As for the quality of water, then see for yourself. Bottled or well-filtered water pollutes the kettle less, but it is not a panacea - only distilled water absolutely does not precipitate, but we do not recommend anyone to drink it - it is too unhealthy.

Quality tap water depends on the water service, its source, and even the condition of the pipes in your home. Sometimes it is enough to clean the kettle every couple of months, and sometimes after a week a thick layer of scale forms in the tank.

Therefore, it is up to you to decide on the frequency of cleaning your kettle - it is impossible to give an exact answer remotely.

How to prevent scale formation

You will hardly be able to completely avoid the appearance of precipitation - unless you really use crystal clear water, with a minimum of heavy impurities. However, reducing the amount of scale is quite realistic.

• First of all, if the water quality in your home leaves much to be desired, get a good water filter. What it will be, cassette or streaming, you decide. Personally, we recommend the faucet attachment, which is by far the most efficient and cost-effective option.
• Do not leave water in the kettle. After drinking tea, part of the water is not used? Pour it out. This will greatly facilitate the care of the kettle in the future.
• Try to clean the kettle regularly with a soft sponge dampened with soapy water. If there is no surface old plaque, you will be able to remove particles that have not yet adhered, which will eventually turn into a persistent sediment.

Advice: Even if you do not have the opportunity to purchase a filter, try to defend the water before boiling. A day will be enough.

If it was not possible to completely avoid the appearance of scale or you need to clean the old kettle, we recommend using our recommendations.

Method 1: Clean the kettle with citric acid

Banal food remedy worth a couple of rubles, which can be found in any kitchen, easily copes with light scale and moderate severity. The procedure is not particularly complicated: fill the kettle two-thirds with water and add citric acid. The powder should be poured at the rate of one tablespoon for every liter of water.

Citric acid is one of the most available ways clean the kettle

Then turn on the kettle and wait for the water to cool. Drain the water when it has cooled to room temperature. Then wipe the teapot with a soft sponge. If necessary, the procedure can be repeated two or three times in a row until the scale is completely gone. After that, boil the kettle again with clean water and wash it thoroughly.

The method is effective, but it will not cope with the old scale that has eaten into the surface. In addition, it is not suitable for enameled teapots - the surface of the latter may tarnish from the aggressive effects of citric acid. But it can be used for both conventional and electric kettles.

conclusions: Effective, budget and very simple method.

Method 2: Clean the kettle with lemon

For those who prefer to use the kitchen to the maximum natural remedies, citric acid can be replaced with lemon. As in the previous method, you should not experiment with enameled teapots if you don't want the enamel to discolor or crack.

Cut the lemon into thin slices and place in a teapot filled with cold water by two thirds. Then boil it. Further, the procedure is different for conventional and electric kettles.

The most environmentally friendly way to clean your kettle

In the first case, you must wait until the water boils, and then keep the kettle on low heat for 20-30 minutes.

For an electric kettle, you need to boil it several times, after the water has cooled down a bit - on average, reviews recommend three boils with an interval of 10 minutes.

After the water has completely cooled, drain it, and wipe the kettle with a soft sponge to remove any remaining plaque. Most often, a second procedure is not required, but if necessary, you can boil the lemon again. The bonus is a pleasant aroma that will spread throughout your kitchen.

Method 3: Clean the kettle with vinegar

First of all, it should be noted that this technique is not suitable for electric kettles: vinegar can only be used for ordinary metal ones. However, for them, this method is very effective and convenient.

As in previous cases, you need to fill the kettle by two thirds. Add vinegar, about half a cup per liter. If you are using a concentrated essence, you will need one and a half tablespoons for the same amount of liquid.

Measure the amount of vinegar carefully

Boil water and leave to cool for one hour. Then just drain. Wipe stubborn stains with a soft sponge - they will go away. After cleaning, it is necessary to boil the kettle with plain water two or three times.

Important: Please note that vinegar emits a very strong aroma when heated, so you need to carry out the procedure only when open windows or switched on powerful hood.

Method 4: Clean the kettle with baking soda

An inexpensive and safe way to get rid of even the oldest and toughest scale is to use baking soda. It is suitable for all types of teapots, including enamel ones.

It is important not to overexpose the soda in the kettle

However, baking soda should be used with care - it can scratch the surface, so do not try to just wipe off the plaque with it. In addition, in order to get rid of the old layer of scale, you will have to repeat the procedure at least three times.

In half a kettle of water, add one tablespoon of baking soda (no more!). For an ordinary kettle, boil water for half an hour. For electric, it is necessary to turn on the boiling mode several times. Forum users claim that three or four times is enough.

Method 5: A mixture of vinegar and baking soda for cleaning kettles

As everyone knows, when soda is added to vinegar, a chemical reaction occurs. You can use it to clean the scale from the kettle, but you should be careful - you can’t just fill the kettle with vinegar and pour soda. Such an aggressive impact will damage the container.

Soda and vinegar, when mixed, give an active chemical reaction.

You need to fill the kettle two thirds and add one tablespoon of baking soda to a liter of water. Then pour half a glass of vinegar into the tank or add three tablespoons of vinegar essence.

Bring the water to a boil and keep the kettle on low heat for half an hour. Then wipe off any dirt with a soft cloth. This method is not suitable for electric kettles, but it perfectly cleans old scale from ordinary ones.

Method 6: Remove old scale with soda, vinegar and citric acid

This method cannot be called gentle: it acts very aggressively on the surface, so it can only be used if the kettle has not been cleaned for several months and a thick layer of scale has formed inside.

This method is only suitable for the oldest scale

In order to clean the kettle, you will need to boil water in it three times for 30 minutes. The first time - with a tablespoon of soda, the second time - with a tablespoon of citric acid, the third time - with a half glass of vinegar. For each case, water should fill the dishes by two-thirds.

After the last boil, carefully wipe the kettle with a sponge, and then boil it several times with clean water. It is very important to ventilate the room well during the cleaning process, as vinegar emits extremely bad smell when heated.

Method 7: How to clean the kettle with Cola, Sprite or Fanta?

Oddly enough, however, this method has a right to exist.

First of all, a few rules:

• Don't use this method on electric kettles with an open heating coil - the sugar in drinks will do more damage to the coil than scale.
• For enameled surfaces, choose drinks without dyes, otherwise the shade of the container may change in a completely unpredictable direction.
• If there are scratches inside the kettle, the method should also be abandoned - dyes can eat into the damaged surface.

The cleaning process itself is quite simple. Fill the kettle half way with drink and turn it on. Leave it for 20 minutes after the liquid boils. Drain it and rinse it with clean water.

Cola is not only a drink, but also an excellent cleaning agent.

It sounds incredible, but even old scale can be cleaned in this way. However, another question arises here - how safe is it to drink such drinks if they remove something that aggressive detergents do not always cope with.

Method 8: How to clean the kettle with apple peels.

Another method from the category of "Unbelievable, but true." It does not always work: if the scale is old, it will not work in this way to get rid of it. But with a newly appeared plaque, the method works perfectly. In addition, it is considered one of the most gentle. It can be used for glass teapots - it's both eco-friendly and will help give them a shine.

The method is suitable for fans of savings: no waste!

Simply boil two handfuls of apple peel in half a kettle of water for 20 minutes. For electric kettles, you can turn on the boil mode 2-3 times. Then leave the device for two hours. After that, you can drain the liquid and wipe the kettle from the inside with a soft cloth. Rinse it well - a clean kettle is ready to use!

Method 9: Use brine to clean kettles

Frankly, this method is not for everyone. It is difficult to imagine a person who likes the smell of boiling brine. However, if you are not sensitive to aromas and the naturalness of the product is important to you, you can experiment.

It is necessary to pour the brine into the kettle, boil and leave for half an hour. Then drain the brine and rinse the kettle with clean water.

Boiling brine will not appeal to everyone.

True, not every brine is suitable - only one that contains vinegar or citric acid. It is through their action that the effect is achieved. But here the question arises: why boil the brine, if you can just use acid or vinegar?

Method 10: Chemical Descalers

If a quick result is important to you and you don't want to experiment with your own kettle, you can just go to the hardware store and get a descaling agent.

Antinakipin, Cinderella, Glitter ... There are many options, for every taste and budget. We recommend that you carefully study the composition: some drugs should not be used, as they can have an aggressive effect on the coating of the kettle or harm your health.

If you do not want to experiment on the teapot.

On the other hand, most safe means contain as an active ingredient all the same citric acid or soda. So is it worth paying more?

In any case, you can use any of the methods we have given - depending on the type of kettle you have, of course.

Over time, almost all the water in the kettle leaves limescale. It manifests itself in the form of salt deposits on the walls of the kettle or heating element, if we are talking about an electric kettle. In any case, this phenomenon adversely affects the operation of the ten, the appearance of the product. That is why every owner of a heating device periodically faces the problem of how to descale the kettle.

In addition to the fact that the scale looks ugly, spoils the appearance of the kettle, its presence harms the family budget:

• due to scale, a longer interval of time is needed for the kettle to boil;
• the presence of scale quickly disables the kettle;
• when scaled up, the electric kettle can spontaneously turn off;
• the presence of scale spoils the color of water, affects the quality of drinks prepared from it (tea and coffee).

Descaling methods

You can remove scale in the kettle in several ways, both folk and using special means.

Household chemicals

Household chemical stores offer a wide selection detergents for descaling. Instructions are included with each. Most often, the product is added to the kettle along with water and boiled for a certain period of time. The names of all are almost the same: "Antinakip" or some derivatives. When choosing a tool for an electric kettle, make sure that there are certain additives that prevent the destruction of metal elements.

Before the advent of special tools, each housewife used her own, proven over the years, which is available in every kitchen. Consider the most popular.

Lemon acid

Descaling with citric acid is easy. This is the way that helps in solving the problem of how to descale an electric kettle. To do this, add 100 g of citric acid to the kettle and let it boil. The liquid in which citric acid is dissolved is not poured out. She should stay in the kettle for several hours, preferably until completely cooled. After a certain period of time, the liquid is drained, and the plaque loose from the action of citric acid is removed.

In the absence of citric acid, it can be replaced with lemon slices. To remove plaque in the kettle, boil 3-4 slices and leave lemon water until it cools completely.

food vinegar

To remove scale, you can use not only ordinary vinegar, but also its other derivatives, for example, apple cider vinegar. but this method cannot be used for electric kettles.

The technology is simple. Pour half a glass of table vinegar and boil for 10 minutes. After the kettle has been thoroughly rinsed and easily cleaned with a hard sponge, the appliance can be used to prepare hot drinks.

Baking soda

Plain baking soda in the amount of one tablespoon is poured into the heating element, the scale is destroyed after half an hour of boiling.

Powerful Recipe

If the scale layer is significant, use A complex approach. First, soda is used, washed, vinegar is added, removed again and transferred to citric acid. It is worth noting that this method is very effective. Accompanied by a violent reaction with the release of bubbles. All scale, even very old, turns into a gray loose sediment. The method should not be used for heating elements electric kettle.

pickle brine

The remaining marinade from tomatoes or cucumbers contains vinegar or citric acid. The brine itself can be used to remove scale.

Modern way

The experience of cleaning heaters with the help of modern liquids to quench thirst is interesting. Ordinary Coca-Cola, Sprite, Fanta are left in open state to let the gas out. Bring sweet drinks to a boil and remove scale with a regular sponge.

Peeling potatoes and apples

To remove scale in the kettle, you can boil finely chopped potato and apple peels for several minutes. Leave the liquid for several hours to cool. The method can be used for enamelware and electric kettles.

wood ash

A good descaler is wood ash. It is not boiled, but simply rubbed into a salt coating. Then the scale is removed with a hard sponge.