Which puncher for the house to choose. Impact drill or hammer drill: what to choose
Do you need to remove old plaster, drill holes in concrete or brick? Not without a perforator. The cost of the tool starts from 2000 rubles - and reaches hundreds of thousands. That means to choose best puncher- you need to clearly define for what purposes you need this tool.
Unlike a drill, which the hammer drill looks like, the kinematics of the hammer drill is based on reciprocating motion - that is why it can deliver powerful blows, turning into a manual jackhammer, and if necessary, on most models, the impact mechanism is blocked, retraining the hammer drill into a powerful one. drill. And, if for a drill the main parameter is power, then for a hammer drill, it is the impact energy that determines its performance that deserves the most attention.
- Cordless Hammers is more of a tool last chance» with an impact energy of up to 2 J, less often - more: they are convenient where there is no possibility of connecting to the mains, that is, with a small amount of offsite installation work(autonomy is seriously limited by the energy capacity of the battery).
- Network punchers with impact energy up to 4 J - this is an amateur-class instrument. These are perforators for the home, and most often it is these devices that wake you up in the morning. Such a hammer drill is already quite confident in dealing with brick or concrete in the impact drilling mode, but the purely impact mode here is rather “for show”. But the hammerless drilling mode is always useful, especially if the tool provides quick installation cam chuck for drills.
- Professional network punchers- a technique not only of increased strength, but also with much greater impact energy. As a rule, it fluctuates within 20 J - and this is nothing less than a standard 7.62x39 cartridge hit by a bullet from a distance of 1300 m: it seems not dangerous, but I don’t want to experience it myself. Such a perforator can successfully replace a jackhammer, but the requirements for it are much tougher: professional tool forced to constantly work in a dusty environment with minimal service interruptions.
What is the best punch manufacturer?
Don't save- a reliable tool, proven over the years, cannot cost a penny. Foreign brands with a worldwide reputation: Bosch, Makita, DeWalt, Hilti, Hitachi, Kress, Metabo, AEG. Popular Russian brands - Interskol and bison.
We have selected perforators, which, according to the results of 2018, can be called the best. These models are popular among buyers, have earned many positive feedback, multifunctional, reliable and safe in operation.
What does a person need in the first place? Housing. People have been arranging it for more than one millennium. Of course, during this time a huge number of various tools and devices have been invented that facilitate work and improve results. The most significant innovations in the field of construction and repair occurred after the invention of electric motors. Some power tools are designed for one purpose only, others can perform a variety of jobs. For example, a hammer drill is a device that combines the functions of a jackhammer and a drill, i.e. can drill and chisel at the same time.
Entry-level rock drills have relatively low power, which means they can only work with soft concrete and brick. The main advantage of such models is low weight and ease of use. The main manufacturers of amateur punchers are domestic firms, such as Interskol, Zubr. Professional tools boast a power of 1500 W, which is enough for working with stone and concrete, chasing channels and making big holes. Famous brands perform in this class: Makita, Bosch, DeWALT.
When buying a hammer drill, you have to consider several important criteria:
- Power. The larger the diameter and depth of the holes that are planned to be drilled, the more powerful the tool is needed.
- Impact energy. Hard materials and high work intensity require high values this characteristic.
- Versatility. If you buy one tool that you plan to use for concrete, metal and wood, it is logical to consider models with interchangeable cartridges.
- Ergonomics and weight. The lighter and more comfortable the punch, the less tired the user. On the other hand, for heavy work you have to use powerful tools that cannot weigh a little.
- Type of food. Battery models are much more convenient than network ones, but much more expensive and limited in power.
We bring to your attention an overview of rotary hammers, which presents tools popular among amateurs and professionals that have proven themselves in the market. When compiling the rating, the following were taken into account:
- popularity of the model;
- the number of positive reviews;
- price-quality ratio;
- the reputation of the manufacturer.
The best inexpensive hammer drills for the home: a budget of up to 7,000 rubles
For the home, it is not at all necessary to purchase powerful rotary hammers with rich technical specifications. Having spent a round sum, you can purchase a tool whose capabilities will never be realized.
Most users need a hammer drill to drill holes for dowels and anchors, drill brick or concrete, make holes for an outlet. Less commonly, a hammer drill is used to dismantle piers, ditch for wiring and remove concrete sags.
Today, there are many models on sale, including famous brands, which you can really buy by spending no more than 7,000 rubles (or even much less). For the home, it is quite enough to take models with a power of no more than 850 watts. The maximum impact energy of such "home" tools is on average 2.7 - 3.2 J. Anything more than 12 J is already professional tools, the price of which is from $ 500 and more.
4 ZUBR ZP-26-750 EK
The most budget
Country: China
Average price: 3,780 rubles.
Rating (2019): 4.6
This tool, at the lowest price in the category, has excellent impact characteristics. The vertical layout of the hammer drill, quite rare in the budget segment, is specially designed for a more powerful blow, the maximum value of which this model has is 2.6 J. Therefore, it easily punches holes in concrete with a diameter of up to 26 mm. The well-thought-out ergonomics of the handles allow you to securely hold the tool during operation.
Buyers are pleasantly surprised by the performance of the perforator - according to reviews, the drill goes into concrete like into a tree. The owners also praise a solid case and another convenient option - the ability to quickly replace the motor brushes. Complaints cause a short power cord - only 1.5 m - and the lack of reverse.
3 Makita HR2440
Best weight to power ratio
Country: Japan
Average price: 6 690 rubles.
Rating (2019): 4.7
With a power of 780 W, an impact energy of 2.7 J and a weight of only 2.3 kg, this hammer drill can be held with one hand, and the maximum diameter of a hole in concrete that it can drill is 24 mm. This is an absolute record in the budget class of the instrument. A few more high price does not scare off buyers, for whom the brand name Makita is synonymous with quality and attention to the smallest details.
The owners of the hammer drill approvingly speak of the ergonomics and ease of use of the tool. Reliability and performance, according to reviews, are also on top. A well-thought-out case and the build quality of the case are also among the advantages of the models. The only negative is the lack of a chiseling function.
2 Interskol P-22/620ER
Buyers Choice
Country Russia
Average price: 4 256 rubles.
Rating (2019): 4.8
One of the most popular tools among buyers from Russia, this rotary hammer has earned high marks from users for its unpretentiousness, performance and maintainability. Combined with a reasonable price, these characteristics make it the best choice for installation work. Of course, it does not have very high power - 620 W and there is no clean blow mode, but it is quite suitable for drilling holes in concrete or brick.
The owners note that this hammer drill is a great helper in home repairs. It is quite light, fits comfortably in the hand, and comes with a well-thought-out case. Users are pleased with the reverse mode and electronic speed control. Cons - persistent bad smell plastic and the lack of a “hit” mode.
1 Bosch PBH 2900 FRE
The easiest
Country: Germany
Average price: 5 890 rubles.
Rating (2019): 4.9
The light and functional Bosch rotary hammer is a successful development of the engineers of the German concern. It has the lowest weight in its group, three modes of operation, including chiselling, and has earned many positive customer reviews. Electronic speed control increases the life of the hammer and provides user convenience. Branded SDS-Plus cartridge allows you to instantly change drills.
The owners of this device especially like the light weight with a fairly powerful impact and a reasonable price. The equipment is also on top - the puncher case is traditionally thought out, in addition to the BOSCH PBH 2100 RE itself, drills, drills and, if necessary, a replaceable quick-clamping chuck are placed there. In a word, experienced craftsmen we are sure that this hammer drill is the best option for the home.
The best "proven" punchers: price-quality
AT this rating included the most popular models of rotary hammers from well-known brands Bosch, Makita and DeWALT. Main criterion rankings - a large number of positive feedback regarding the quality and reliability of the power tool.
4 AEG KH 24 E
The best option for work at height
Country: Germany
Average price: 7,780 rubles.
Rating (2019): 4.6
The mass of the perforator is 2.4 kg, so it is extremely popular among high-rise workers who are engaged in insulation and facade decoration. These installers have to work without a solid support, so the low weight of the tool is an essential selection criterion. Despite the lightness of the model, the maximum diameter of a hole in concrete that can be drilled with its help is 24 mm. There is a screwdriver mode and a power button lock.
The owners praise the reliability of the tool. It is often used for intensive installation work and, according to the owners, it heats up a little and cools down quickly. In general, judging by the stories of buyers, if properly cared for, this hammer drill can work without breakdowns for years. Among the shortcomings is the lack of drills and lubricants in the delivery set.
3 DeWALT D25124K
Best shot in its class
Country: USA
Average price: 9 590 rubles.
Rating (2019): 4.7
This model has an impact energy of 3.4 J - best indicator in the category. At the same time, damping of recoil and vibration is also at a high level. Such a hammer drill is perfect for electrical installation and installation work, where it is often necessary to lay strobes, make socket boxes and drill deep holes in concrete. The kit includes a replaceable keyless chuck, so the tool can also work as a powerful drill.
Customers are particularly pleased with the performance and reliability of the rock drill. According to reviews, it practically does not require any effort from the user - you just need to guide it correctly. Professionals like a good weight-to-power ratio, and it is recommended, including for high-altitude work. The disadvantage is a rather modest package: only a case and a depth gauge.
2 Makita HR2470
Excellent ergonomics at an affordable price
Country: Japan
Average price: 7 685 rubles.
Rating (2019): 4.8
A weight of 2.6 kg with a maximum impact energy of 2.4 J is the result competent work designers. Adding to this an excellent balance, ease of use and excellent reliability indicators, we get the best tool for home or professional installation work.
The owners unanimously praise the speed of drilling, resistance to overheating and long-term work without stops, ease of maintenance and maintainability. Excellent weight distribution and thoughtful ergonomics of the instrument also deserved excellent marks. Minus one: expensive and hard-to-find spare parts, for example, replaceable motor brushes.
1 Bosch GBH 2-26 DFR
Best functionality
Country: Germany
Average price: 10,620 rubles.
Rating (2019): 4.9
Bosch GBH 2-26 DFR is one of the most popular rotary hammer models for home and semi-professional use. Number one in our ranking of the most proven rotary hammers! Can work both in the mode of drilling, and in the mode of a slotting. There is a quick change chuck system and a quick-release chuck included.
You can find many positive reviews about the Bosch GBH 2-26 DFR. Among the advantages can be noted the durability of the tool and high power. Comment from one user:
“An indestructible perforator, the best in reliability! Freely takes high-grade concrete, which is used for the construction of bridge structures. He heated it to such an extent that his hands could not hold. And not a hint of wear. At the same time, he got me b. y. 2 years"
Complaints about the tool are mostly related to marriage and fakes. The fact is that the model is very popular and there is a possibility that instead of the German assembly, a Chinese-assembled puncher may fall into the hands of the buyer, with all the ensuing consequences.
Video review
The best cordless rotary hammers
Any power cord is a potential inconvenience. A corded tool requires an outlet or an extension cord to carry around. In addition, in many places there is simply no electricity nearby, for example, when installing advertising structures on the street. In such cases, a cordless rotary hammer is a good choice. In this category, only best models with excellent ergonomics. All of them use modern lithium-ion batteries as a power source and have a good mass-to-power ratio.
4 Interskol PA-10/14.4R-2
The lowest price
The country: Russia (produced in China)
Average price: 6 995 rubles.
Rating (2019): 4.5
Perforator from Interskol is the weakest link in our rating. But we are not talking about quality problems - it is good here - but about low power. The impact energy is only 0.9 J, which means that the tool can only be used on relatively soft materials. However, according to users, the hammer drill is able to make holes in concrete with a diameter of about 16 mm without any problems, which means that ordinary users of the device will have enough for their eyes.
In addition, this model has one important advantage - compact dimensions and extremely low weight, making it very convenient to use. Before us is a universal device that is able to replace a screwdriver, drill and puncher.
User Reviews
Advantages: the lowest weight (only 1.4 kg); there is a backlight working area; there is an engine brake;
Disadvantages: no chiseling mode; no anti-vibration system;
3 Hammer drill BOSCH GBH 180-Li 4.0Ah x2
High quality batteries
Country: Germany
Average price: 17,910 rubles.
Rating (2019): 4.6
Rechargeable Bosch tool so popular among builders and installers, because the quality of his batteries is always on highest level. This hammer drill is no exception. The 18 volt battery charges in just 40 minutes and has a capacity of 4 Ah, with two of them included, allowing you to work without interruption. The ergonomics of the tool is well thought out: it is well balanced, has comfortable rubberized handles, blocking from accidental activation. A nice bonus is the ability to quickly replace the motor brushes without disassembling the tool.
The owners praise the true German build quality of the instrument and attention to the smallest details. Listing the advantages of the hammer drill, buyers especially often mention excellent batteries, smooth and precise switching, as well as a convenient case. And although his impact energy is not the highest in the category - 1.7 J, he drills holes with a diameter of up to 20 mm in concrete without problems.
2 AEG BBH 18 Li-402C
Optimum combination of power and performance
The country: Germany (made in China)
Average price: 25,190 rubles.
Rating (2019): 4.7
Hammer drill from AEG - very a good choice. It has a high power that allows you to drill holes in concrete with a diameter of up to 50 mm. Of course, the impact energy of this model is somewhat lower than that of the rating leader, but 2.3 J is enough for most jobs.
Ergonomics, as one would expect from a device of this level, is on top. Changing modes, installing a drill, adjusting the drilling depth limiter - all operations are done in just a second. The use of the device is also facilitated by the vertical layout of the engine and the relatively low weight. In general, although expensive, but high-quality, powerful and convenient puncher.
When repairing an apartment and a house, probably, one of the most popular power tools is a hammer drill due to its versatility, for drilling hard materials( , metal), soft materials(plastic, wood), chiselling, for example, breaking tiles.
In this article we will consider the question of which puncher to choose.
Perforators are divided into household low power from 450 W to 1000 W, small in weight from 2 to 4 kilograms, with an impact force from 2 J to 3.5 J, and professional from 1000 W to 3000 W and weighing up to 12 kilograms, with a force shock from 4 J to 20 J.
Also, rotary hammers differ in the type of engine location, these are:
Horizontal arrangement most common and used in household punchers. Such a scheme is the most compact and convenient for operation, however, the disadvantage is an increased shock load on the engine and worse cooling. The impact mechanism is usually using an oscillating bearing.
Modern rotary hammers usually have 3 modes of operation:
- Hammer drilling (basic mode);
- Drilling (drill);
- Blow (jackhammer);
Most often, hammer drills have two or three modes, single-mode, as a rule, this is a professional tool sharpened only for drilling with impact, which does not have additional devices and mechanisms and, as a result, is more reliable and durable.
Perforator body
Most often, the body is made of several materials. These are metal (aluminum alloys), hard plastic, soft plastic. 
Anti vibration system
Vibration protection systems are divided into active and passive.
Active systems (AVS) are installed on powerful models. This is a shock-absorbing device, a counterweight with a spring that absorbs recoil. 
The passive system is a set of all possible rubberized pads, handles, which, in addition to anti-vibration properties, allow hands not to slip.
So, having considered the technical parameters, I would like to touch on one more important parameter: tool cost.
Price household tool starts from $50 to $250. The cost of a professional tool reaches $ 1,000.
Nevertheless, you should not buy the cheapest even if you do not have plans for a global restructuring of the apartment. Most likely it will not serve you for a long time, and in case of intensive use it will not be able to help you at all. Take a closer look at the puncher in the middle price category.
For almost all work that may arise on the repair of an apartment, a rotary hammer from 1000 watts to 1500 watts with a horizontal engine will suffice.
This will allow you to work in narrow places, with a shock energy of 2-3.5 J. A nice bonus is the ability to have three modes of operation and reverse. 
Want to drill a hole in concrete? Yes, so that this manipulation does not take a lot of time, nerves and physical effort? So you need a device that will combine best qualities jackhammer and electric drill. So that repairs do not become a colossal test for those who dared to carry it out on their own, it is worth purchasing quality puncher for home. For professional builders, this topic is doubly relevant. How to choose a puncher and not miscalculate - the question, of course, is complex, but completely solvable.
Hammer drill and impact drill: what's the difference?
A perforator is a drilling machine that performs longitudinal-axial (i.e., impacts) and rotating movements of the working tool. Practice shows that very often this device is confused with a hammer drill. What is the difference between these units? It lies in the intricacies of the technical implementation of the percussion function: for a drill it is carried out mechanically, for a perforator it is pneumatic. It is thanks to this that the latter is able to make holes in concrete, brick, stone, etc. much faster, while working with it requires much less physical effort than with a drill. It is worth noting that the "shock" mode seriously wears out the drill.
Perforators are larger and more massive units - they are highly productive and reliable.
Tool classification: attention to operating modes
Perforators, depending on their functionality, can be divided into several types:
- single mode;
- dual-mode;
- three-mode.
The first are highly specialized professional devices. Their design is extremely simple, but nevertheless they are not suitable for home repair needs. Single mode models support hammer drilling.
Models in which the only supported mode is impact (chiselling) are called jackhammers.
More common, and therefore more familiar to the layman, are dual-mode punchers. In addition to hammer drilling, they have a mode of either conventional drilling, or chiselling.
In three-mode units, all of the above functions are present.
Drilling mode is used when working with metal and wood, drilling with impact - with concrete and brick, impact mode is optimal for removing tiles from walls and floors.
Before choosing a hammer drill for home or work, be sure to pay attention to the functionality of the device - after all, in everyday life, for sure, all three modes will be required.
Design features, equipment, technical characteristics
The main characteristics that can be used to judge the performance of a rotary hammer are its power (measured in watts) and impact force (measured in joules). Which perforator is best? Of course, the one in which these parameters are higher.
Note! The impact force is not always proportional to the power - this is due to the design features of the power tool.
Hammers are equipped with one of two types of cartridges: conventional or keyless. The best option not only for professional but also for home use is the second option. The keyless chuck will allow you to change drills with a light effort of your hand, without using a special key.
Another interesting characteristic any unit - its weight. Allocate light, medium and heavy class of punchers.
- light punchers weigh no more than 4 kilograms, their maximum power 700 watts;
- medium ones weigh from 5 to 8 kilograms, their power ranges from 700-1500 watts;
- heavy devices weigh 8 or more kilograms, their power exceeds 1500 watts.
Lightweight models are equipped with SDS-plus cartridges, which allow the use of drills with a diameter of up to 26 millimeters. Heavy rotary hammers are equipped with SDS-max cartridges - the operation of drills with a diameter of up to 60 millimeters is not a problem with them. In different model lines medium punchers can be "meet" both those and other cartridges.
Interesting! Relatively recently, SDS-top cartridges (for 16-25 mm drills) began to be used. They are not yet widely used - such cartridges are mainly equipped with units from Bosch.
Like most other construction power tools, the hammer drill can carry out its work, "eating" not only from the network, but also from the battery. It is worth noting that cordless tools are much more expensive than classic ones, and the need for such “mobility” is extremely rare.
Electronic speed control is by no means an extra item in equipping a rotary hammer. The presence of an appropriate "auxiliary device" will allow you to select optimal speed rotation - depending on the size of the drill, the current load on the perforator, etc. Thanks to the electronic adjustment, the service life of the unit increases and the quality of work improves. In principle, many models can boast of such a function.
Heavy rotary hammers (in most cases) are professional tools. For home needs, the average model is enough.
Additional features of the units
For perforators, in addition to standard set functions, there may be additional gadgets that significantly expand the capabilities of the tool and facilitate the work of the user. For example, the presence of a reverse mode in the puncher will allow you to use the unit as a screwdriver. In addition, this mode can help to "rescue" a jammed working tool.
The "soft start" option will allow you to avoid chaotic vibrations of the device immediately after it is turned on. The present switch stopper saves you from having to constantly press the corresponding button during operation. Safety clutch will protect the engine from damage and overheating.
Expensive models boast an anti-vibration system, as well as fully insulated all-metal housings, two-speed gearboxes, and lower noise levels.
The cost of perforators
The price of the units directly depends on their power, the range of implemented functions, the quality and cost of all components. Also, the cost of each particular puncher will be affected by the scope of delivery. The most budgetary unit will cost you 80-100 US dollars, the middle-class model will cost about 250-350 USD. A professional three-mode puncher costs neither more nor less - $ 1,000.
Which puncher to choose for home and which one for work
For home use, an excessively heavy and mega-powerful unit is definitely not required - you can turn your attention to the middle-class models from Makita.
But professionals should think about a high-performance machine with enough lotions. A well-chosen model from Bosch can be a good option.
In both cases, it would be very nice if a set of drills were included in the package.
You can argue endlessly about which perforator is better. Remember: worthy of attention a hammer drill doesn't have to be the coolest or obscenely expensive. If the unit will fully cope with the task assigned to it, then in your particular case it will be the best!
Perforator - is very the right tool used for drilling various holes. By its principle, the tool is similar to an impact drill, but these devices are not interchangeable. In this article, we will deal with the task - how to choose a suitable hammer drill for homework, which device to choose for apartment renovation, and also consider all its defining characteristics.
General information
Perforator - a device that allows you to drill holes of various sizes and depths, in various materials. The intended purpose of the device is the drilling of materials with high strength and rigidity (for example, concrete). Today, the most common types of these devices are devices with a pneumatic and electric mechanism, which provides impact drilling of the material. Many consumers are concerned about the question: "How to choose a hammer drill for the home?". Uncertainty comes with one kind a large assortment proposed models. After all, each of them differs in performance, as well as various technical features. So to make a choice good puncher, a number of factors need to be considered.
Impact drill or hammer drill?
These two devices needed for repair have fairly similar parameters, but at the same time they are different.
- Drill - a smaller and less weighty device, applicable, as a rule, for drilling not very durable materials. Its impact function provides very little drilling assistance.
- The hammer drill, in turn, has a large drilling and impact power, while it has the function of a non-impact drill. When buying a device, you can save cash, which would have invested in the purchase of both devices. The powerful drills used in the devices will allow you to quickly and easily make the necessary holes in shape and depth.
How to choose the right power
The power of the device is one of the basic parameters. A fairly wide range of device powers is presented on the market: from 450-500 W to 2000-2500 W. As a rule, models with a power of 450-600 watts are suitable for the home. All models with higher power can be called professional. Such devices allow for faster and deeper drilling. For infrequent drilling work, you can completely use a low-power model.
Decide on the type of device
The choice of a good rotary hammer is influenced by its variety of engine location.
There are two such types:
- Horizontal motor model, suitable for short and narrow drilling. In such varieties, the engine is located along the shock axis, which contributes to a low level of cooling. At long work this type of engine must be allowed to cool, otherwise it may fail.
- Model with a vertical arrangement of the engine. In such devices, the engine is located, respectively, perpendicular to the shock axis. These devices have such advantages as higher power and no need for constant cooling. Therefore, such varieties are more often used in conditions where uninterrupted operation and high shock power are required.
About the force of impact
Striking power is one of the determining parameters when choosing a reliable device. However, more power means more tool performance and therefore more energy consumption. The more there will be operating power, the deeper and larger in diameter it will be possible to drill. At the same time, one should not forget that such high-power devices will have large dimensions and have a large mass.
How to choose a hammer drill for concrete
When choosing required model, you should pay attention to its labeling. For concrete, marking is required - SDS +. With such a device, you can not only punch concrete, but also stir the solution, and screw the bolts. Also, in the technical specifications, you should pay attention to the maximum allowable drill size. For various materials, be it brick or concrete, there are drills applicable for a particular material. Plus to all this - the high power of the device itself.
Preferred Power Source
There are two basic types of power sources: battery and mains. When working at height, it is not always possible to connect the power grid. Therefore, in such conditions, it is most effective to use models that run on batteries. The battery itself must have a high capacity, as shock power will require big expense energy. The main feature of these types of punchers is the price indicator. Battery powered devices are much more expensive than mains powered devices.
How to choose a Bosch rotary hammer
Today, many companies selling repair equipment recommend choosing a good hammer drill in favor of the German power tool giant Bosch. She has long been at the hearing of every inhabitant. main feature of this brand is a reliable and high-quality product. To give advice on choosing a reliable rotary hammer Bosch- you need to understand their labeling. You can find the following designations: PBH or GBH.
- G - device for professional use. R - a device used for domestic use.
- The numbers indicate the weight of the tool. (example: 3-40, 2-32).
- Capital letters: d - applicable for chiselling, f - with a replaceable cartridge, r - has a reverse.
When buying a company's products, carefully read all the technical characteristics of the tool so as not to overpay for unnecessary equipment.
A little about the additional characteristics and weight
The lighter the device, the simpler and easier it is to work with. Many existing household models are lightweight (3.5-4 kg.). Among other additional devices, it is worth highlighting: the possibility of a smooth spin-up of the drill, a rotation speed regulator, and protection against jamming of the drill.
About choosing a drill
Why is idle so important?
The main purpose of the drill is to work with concrete. The difference between a drill and a drill lies in the characteristic tip, produced according to the SDS standard. For various purposes, drills with special nozzles (crowns) are applicable. Each storm is marked with its dimensional characteristics, and on the installation structures, it is indicated which drill (in diameter and length) should be used to drill the required holes.
A tip for choosing a reliable hammer drill is to choose a kit that includes: the device itself, a drill and a case for easy transfer and storage of the tool. It is recommended to give preference to well-known companies that have proven themselves with the best side and their products are of excellent quality.
Rating of the best punchers
The best professional rotary hammers
We have collected almost every professional horizontal motor rotary hammer with SDS+ chuck available on the market and identified the best among them based on their characteristics.
- Makita HR5001C
- Makita HR5201C
- Makita HR4501C
- Makita HR5211C
- DeWALT D 25601K
- Bison ZPME-1250EK
- Makita HR5210C
- Hitachi DH45MR
- DeWALT D 25762K
The best punchers for 5000-6000 rubles