How to remove a mosquito net from a balcony door for the winter? How to remove or install mosquito nets on plastic windows? How to get a mosquito net out of a window.

With the onset of cold weather, the need for mosquito nets disappears, since annoying insects disappear until spring, and windows are opened for ventilation much less often. To prevent the screens from gathering dust unnecessarily and from wearing out, it is recommended to remove them and put them away for storage, even if they do not interfere with the window (or door) sashes opening and closing.

The procedure for removing products is quite simple, but varies slightly depending on what type of mesh needs to be removed. It also depends on the method of attaching the structure to the window or window opening.

General principles for dismantling mesh

• The structures should be removed in favorable weather without wind.
• It is advisable to have assistants hold the net (if possible).
• You can remove the fasteners through the window sash next door.

How to remove the mesh on the frame

The mesh on the frame is a quadrangular structure made of metal or plastic profile, between which a mesh fabric is stretched. It is attached to the window in one of three ways: using corners (PVC or metal), pockets, and flag fasteners. Fastening is done by the corner parts from the outside.

This mesh is removed by lifting plastic handles with simultaneous deviation of the lower part from the frame. After the lower corners are released from the fastenings, the frame can be grabbed with one hand at the bottom and, turning horizontally, brought into the room.

The product with mounting angles placed on the frame is dismantled in the same way - the structure is lifted, tilted and removed from the fastenings.

The mesh is easily removed with fastening in the form of hooks (the hooks are located on the mesh and, when fixed, cling to window profile With inside premises). When lifting and tilting the frame, the mosquito protection is easily separated from the window. The fasteners themselves cannot be removed from the frame.

How to remove sliding nets

Sliding-type insect screens are attached to the window using a special guide, which simultaneously acts as a rail along which the structure moves. The product may have one or two guides, which are placed at the top and (or) bottom of the frame. To remove such a mesh, lift it so that the roller comes out of the guide recess. Then the structure is lowered and removed from the window.

A pleated mosquito net is one of the sliding options. It is more compact and folds conveniently when opened. The structure should be dismantled in the same sequence as a regular sliding mesh.

How to remove screens on plungers

Pin fastening, more often called plunger fastening, is considered the strongest and most durable. It involves fixing the grid in window opening using pins with springs inserted into specially prepared holes. To remove the structure, the pins must be removed from the recesses, for which they should be turned several times in a clockwise direction. Rotation of elements is not allowed reverse side, as this may cause the plunger to unwind and scatter into parts.

How to remove other types of meshes

To dismantle old meshes nailed or screwed with self-tapping screws, you will have to use a screwdriver or wire cutters. The fastening parts should be removed from the frame, and then the mesh itself should be removed. Holes in the frame can be sealed with tape or putty.

Nets that are attached to door or window frames using hinges must be removed from them by lifting the structure up.

Modern roll models are removed assembled along with a pencil case into which the canvas is stored.

Certain difficulties may arise when removing a mesh with a flag fastening - after all, the fastenings located on the outside must first be bent. The procedure is quite risky, so it should only be performed with insurance or with an assistant who will support you. The “flags” of the fastening from the street side are bent, while you need to lean out from the adjacent part of the window. Once the fastenings are unfastened, the mesh can be easily removed.

In principle, the process of removing the mesh is quite simple and does not require special skills. However, to avoid any hiccups or difficulties, you can perform this operation once under the guidance of specialists during installation of the structure.

Related Posts

The mosquito net is removed in the winter for cleaning or if windows are being repaired. Although this product has a common name, you still need to find out how to remove a mosquito net depending on its design and method of fixation.

If outside the window strong wind, then take into account the fact that the mesh has a large windage, and you may not be able to hold it during such adverse weather conditions.

In the standard version, the frame structure is a quadrangular frame of rectangular or square shape. Attached to the window in three ways:

1. Z-shaped holders or on pockets.
2. Plungers.

Now it is clear that there can be no talk of a single, standard method of removing the mesh from a plastic window. We will look at each separately.

Holders, pockets

The principle of fixing the mesh with these elements is almost the same, so you won’t feel any difference when removing it. Use the handles on the mesh to lift it all the way and then move it away from the window. bottom part frame so that when lowered it passes by the fasteners. This disengages the mesh from the window. Grab its edges with your hands, turn it around horizontal position and pull you into the room. The grid has been removed.

First, check the reliability of the handles, otherwise, at the most crucial moment, they may break and the mesh being removed will fall down. After such a fall it will have to be repaired.

In this case, the hooks are attached to the mesh frame and held by inner part window frame. This type of fastening allows you to remove the mesh in the same way as in the fastening described above, but there is another type metal fastening, which is also called hooks.

For this fastener, the mesh is made in such a way that it can be slightly recessed in the window opening. Each small hook is attached with one self-tapping screw and can be rotated. To remove the mesh, you need to loosen all the screws a little and turn the hooks (except for the bottom ones) inside the window. After such actions top edge The mesh moves out a little, and the entire frame rises up and is removed from the window.

If the hook is tight to the side, then loosen the fasteners even more. If this is not done, the rubber seal may break.

The plunger fastening is the most reliable, so the mesh secured by it is a little more difficult to remove. You must first simultaneously pull out 2 plungers from the lower profile, pull out the mesh a little, and then pull the upper plungers down. It is advisable to have a second person hold the net so that it does not fall.

Some types of plunger fastening can, together with the mosquito net, disengage from the window frame without applying additional force to them.

Basically, sliding screens are installed on sliding windows. The principle of removing the sliding mesh is the same as for wardrobe doors. The frame moves along a guide rail from which it must be removed. To do this, the moving part must be lifted so that it comes off the rails, moved to the side, lowered and removed from the window.

If you need to remove a pleated or ordinary sliding mesh from a balcony or loggia, then the steps are performed in the same sequence.

Rolled mesh

Rolled mesh is made on the basis of a roller shutter mechanism and works on the same principle. If you need to remove it, you will have to dismantle the entire mechanism, along with the guides. This is not only difficult to do, but also dangerous, since all its fastenings are located with outside window. It will be necessary not only to unscrew the screws, but also to hold the entire mechanism so that it does not fall, which not everyone can do.

The rolled mesh does not need to be removed for the winter.

Video

This video shows how to remove and replace the mosquito net:

Watch a video about the species mosquito nets.

Metallo plastic windows have long become a very common occurrence. They are found in almost every window opening, every house or apartment. On construction market they appeared quite a long time ago and almost immediately won the trust of consumers, since they have good properties and characteristics that satisfied all needs.

Buy metal-plastic windows You can go to a specialized store, where you can get acquainted with the assortment and ask questions to specialists. For example, the REMOKNA Almaty company provides a wide selection of these products, which can be found on the company’s website.

One of the components window design is a mosquito net. Of course, you can buy a window without a mesh, but having one has a number of advantages. This attribute requires special care. The mesh should be removed periodically and washed well.

Types of installation

There are three most famous and frequently used types of mosquito net installation:

• on plungers;
• frame installation;
• sliding installation.

Remove the mesh that is installed on the plungers

This type of connection is often used and is one of the most reliable. This design involves screwing the mesh at the bottom and top to window frame pins.

Mesh dismantling technology:

• unscrew each of the plungers that secure the pins;
• remove all fasteners;
• carefully remove the mesh.

Removing the frame mesh

The constituent elements of this design are metal carcass and plastic or iron corners with a mesh stretched in the middle. It can be removed quickly and easily:

• lift the special handle up 2 cm;
• releases after lifting bottom mount and the structure can be removed by pulling it down.

Removing the sliding mesh

Sliding screens are installed in compartment windows. This design is special in that it can move from side to side, as it is located on guides with sliders. To remove the mesh you need:

• lift it and give it the opportunity to get off the guide;
• gently pull the mesh down.

These are the ways to remove a mosquito net from a window. But be extremely careful and do not allow the net to fall off your hands and fall onto the street. This risks the fact that it will simply break and you will need to buy a new one.

Mosquito nets are removed for winter or for cleaning. It is not difficult to dismantle the mesh; just study the fastening system. The design of the nets is different (there are frame, roll and sliding), so the methods of attaching to the window also differ.

Remove the net in calm weather. If the adjacent sash opens, ask your family to secure the product by holding the frame outside. The frame can also be removed through the adjacent sash.

Removing the frame mesh

The frame mesh looks like a quadrangular metal frame with a fixed canvas. Attached to the window in three ways - on the corners, on pockets or on hooks. The corners are attached to the frame from the street side, at the corners of the frame. To dismantle the mesh, lift it by the handles and tilt the lower part 2 cm away from the window (until it comes out of the lower corners). Lower the frame to the low tide, grab the lower part with one hand, turn it into a horizontal position and bring it into the room.

Nets are also produced with pockets screwed to the corners of the frame. Dismantling is similar to the previous option - lift the frame, and then tilt the lower part and move it to the side. Removing the mesh with hooks is also easy. The hooks are attached to the mesh frame and, in a fixed position, cling to the window profile from the side of the room. The mesh is removed in the same way as in the case of corners and pockets. The mesh fastening elements are not dismantled.

Dismantling sliding nets

Sliding screens are installed on sliding windows. The structure moves on runners along special guides. There are two such bridges, above and below the grid. To dismantle, lift the mesh up, move the lower sliders out of the guide, then lower it down and remove it from the window.

A type of sliding mesh is pleated, which is installed in an ordinary window opening. When moved to the side, it folds into an accordion. It is dismantled in the same way as the sliding mesh.

Dismantling mosquito nets on plungers

The most reliable fastening is considered to be a pin (plunger) connection. The mesh frame is pinned to the window profile at the top and bottom. The plunger is a complex assembly consisting of a metal pin with a cap and a spring. To dismantle the mesh, unscrew the plunger from the hole. If the part cannot be pulled out, turn the pin together with the plunger clockwise several times. It is not recommended to rotate in the other direction; you can unscrew the plunger and lose parts.

Dismantling other meshes

The old-style mesh is more difficult to remove from the window. It is attached with self-tapping screws and nails. To dismantle, use wire cutters and pliers, remove the fasteners and the blade itself. Seal nail marks with self-adhesive film.
Door mosquito nets are held on hinges and fixed to the profile using magnets. To remove it, lift the structure up and remove it from the hinge.

Rolled meshes resemble blinds in their operating principle; when not in use, the fabric is located in a box. Fixed above the window. If necessary, remove the mesh along with the box.

The frame can be attached to the profile with plastic flags on two or four sides outside the window. To dismantle, open the adjacent sash, lean out of the window and bend the flags to the side, then remove the frame with the canvas. The operation is quite dangerous, so a second person is needed for insurance.
The process of removing the mesh, while seemingly simple, requires some skill. Practice performing the operation in the presence of a specialist at the window installation stage.

The most common type of mosquito nets are frame nets, which are fine-mesh fabric placed on a plastic or aluminum frame. Similar nets are attached to the window from the outside using brackets. In the summer, when the windows are open, the mosquito net protects the room from insects, and noticeably less dust gets into the house. In winter, the net is not needed, so is it worth taking it off, or just forget about it and leave it at that?

In fact, the materials from which mosquito nets are made are able to withstand very harsh conditions. weather. However, despite its high physical performance, in winter, when constant freezing and thawing occurs, the mosquito net is subject to the load of snow and ice, which leads to its stretching. Therefore, in the spring you may find that the mosquito net has sagged somewhat. It will still be a good barrier for dust and mosquitoes, but it appearance most likely it won't...

0 0

Do I need to remove the mosquito net from the window for the winter?

The summer-autumn season has passed and insects are trying to enter the house through open window, there is practically none left. The cold weather is approaching, and the mosquito net, most for years, which served as a protective shield against mosquitoes and flies, still stands in the window opening.

Of course, there are people, and it can be argued that they are the majority, who, even when winter comes, do not put the mosquito net away in a heated room. It’s hard to say what guides them when they don’t complete this generally simple procedure on time. Perhaps this comes from ignorance of the rules of operation of this product, or perhaps Her Majesty’s laziness is simply to blame.

After reading the information presented in this article and devoted to the question of “whether or not to remove a mosquito net for the winter,” the reader will be able to decide for himself whether this operation is necessary or whether everything can be left “as is” until next spring.

Design of mosquito nets.

0 0

We’ve had Euro windows for about 5 years now, the screens for the winter were removed from them only in the very first year, and then they were stuck and clogged and the screens are in excellent condition, they haven’t torn or broken. And where can you store these mosquito nets in the winter in an apartment if renovations have already been made and there is simply no space for them, and why look for an extra one? headache if they stand perfectly well on the windows in winter and continue to perform their functions in summer? The only thing I can say is that the mesh has become a little stretched, but this is not significant at all, there is simply no such clear tension as in the new mesh, but I repeat - throughout the whole summer not a single mosquito was allowed into the apartment by any mesh.
So, just like I left the nets behind the Euro-windows in winter, that’s probably what I will do...

0 0

You probably tried to remove the screens from the windows in the cold. In this case, the fastenings can really be broken, since in the cold they become very fragile. I recommend that you wait until it thaws and carefully remove the nets, without using force. Broken ones are very easy to replace with new ones, even on your own, they are usually fastened with 2 screws, new ones can be purchased on the market, or if you have a guarantee, contact the window company that installed the windows.

Recorded by

If you remove the mesh in the cold, then first heat the fasteners with a hairdryer.

Recorded by

Andrey Makarych

To remove a mosquito net from a window, you need to grab the plastic holders in the middle of the mosquito net with both hands and gently pull it vertically up. After this, the lower part of the mesh needs to be moved away from you by 2-5 cm and smoothly lowered down to...

0 0

Should I take off my mosquito net for the winter?

First opinion.
Nothing will happen to mosquito nets in winter if you don’t touch them. No need to take it off.
Second opinion.
Take off! Otherwise, the nets will not last long.

According to the operating rules, the mosquito net must be removed for the winter.

Causes:
In winter, a blizzard sweeps snow into the mesh, which turns into ice in the sun, and daily expansion and contraction can tear the mesh cells.
Frost, sun, wind - all these are aggressive environments for plastic. One of the most fragile parts of the mesh are the fastening handles. After two years spent in the cold, they easily burst even with slight pressure.
And finally, the netting may be susceptible to attacks by sparrows and other birds.

We often come across questions:

Is it difficult to care for a mosquito net?

Answer - No, it's not difficult. The mosquito net is easy to clean. For this warm will do soap solution.

Is it possible to install mosquito nets on...

0 0

TO YOUR EXPERIENCE

Do I need to remove mosquito nets from windows for the winter?

Many people leave mosquito nets on their windows over the winter and claim that nothing bad happens. Indeed, the materials from which frame mosquito nets are made are quite durable and can withstand quite harsh weather conditions.

Despite its strength, freezing and thawing in winter, under the load of ice and snow, the mosquito net noticeably stretches. Leaving the frame mesh for the winter...

0 0

What kind of cracks are we talking about???
Definitely take off the mosquito net for the winter! For three winters we had a mosquito hanging on the kitchen window - as a result, the mesh fabric stretched a little, so to speak, and began to sag. I had to order a new net in the spring. Although there is a 5-year warranty on the window, it does not cover the mesh.
They didn’t risk re-tightening the net themselves, but in vain. Nothing complicated, but you need accuracy and endurance. The only tools you need are a mounting knife and a screwdriver.
The first thing to do is to pick up the cord at the junction and carefully remove it.

Secondly, if the mesh is intact, then you can use it for the constriction; if not, then cut off a piece of new mesh and, placing the edge in the groove, secure it with a cord.

This is where you have to tinker, especially when you pull on the last side. Don't be afraid to leave the edges of the mesh a little longer; they can then be cut flush.

0 0

The most common type of mosquito nets is frame nets. This is a fine mesh fabric stretched over aluminum or plastic frame. Such nets are attached to the window from the outside using special brackets. In summer, a mosquito net allows you to keep the windows constantly open, protecting against insects and significantly reducing the amount of dust entering the apartment from the street. Well, in winter the net is useless. What to do with it?

Many people leave mosquito nets on their windows over the winter and claim that nothing bad happens. Indeed, the materials from which frame mosquito nets are made are quite durable and can withstand quite harsh weather conditions. However, Windows Master recommends removing mosquito nets from windows for the winter and storing them indoors.

Despite its strength, freezing and thawing in winter, under the load of ice and snow, the mosquito net noticeably stretches. Having left the frame mesh on the window for the winter, in the spring you will most likely see that it is no longer stretched tightly, but slightly...

0 0

The dusty summer in the urban jungle is over, and many are preparing for winter not only by purchasing warm clothes, but also by putting things in order in their apartment. This is a kind of autumn cleanup. Surprise after removing mosquito nets on plastic windows is common to absolutely everyone: the dirt flows under the flow of the shower head, and there seems to be no end to it. But the windows have been washed, polished to a shine, curtains have been hung, a mosquito net has been installed... Stop. Should it be installed for the winter? There seem to be no mosquitoes or flies. On clear example we will see everything.

First opinion. Nothing will happen to mosquito nets in winter if you don’t touch them. No need to take it off.

Second opinion. Take off! Otherwise, the nets will not last long. Judging by the reviews on the Internet, most people indeed prefer to remove the net in the fall, when the insects disappear, and install it in the spring. Here are the main reasons for this decision: in winter, a blizzard sweeps snow into the net, which turns into ice in the sun, and daily expansion and contraction can...

0 0

10

How to remove or install mosquito nets on plastic windows?

Mosquito nets are the most affordable and effective remedy fight against annoying insects. Modern meshes are very convenient; they do not prevent the penetration of sunlight and air; they are made from durable materials and serve for several decades. And most importantly, anyone can handle their installation or dismantling. To do this, just study a little how to remove or install mosquito nets on plastic windows.

There are three main types of nets on the market: frame, roll and sliding. The design of all three types is different, and the approach to their installation and removal also differs.

How to install a frame mosquito net on a plastic window?

Frame mosquito nets are a metal frame on which a fabric is stretched.

To install such a mesh you will need: fastening elements (plastic or metal corners, pockets or hooks),...

0 0

11

And so, why do I advise you to remove the mosquito net for the winter? This summer I was visiting friends and noticed that their mosquito net had small holes. The holes are certainly not very large, but still noticeable.

Well, I sort of decided to make a joke and asked if such healthy mosquitoes really make their way to you. The joke, of course, was a success, and the following answer followed. Birds make holes in the mesh in winter and late autumn when the temperature outside is cold.

As I understand it, when it starts to get colder outside and there is less and less food for our feathered friends, they begin to fly around the windows near houses in search of food. And here is an incomprehensible structure, in the form of a mosquito net, and it would be a sin not to try to bite.

I forgot about all this, and then the other day, sitting at the table, I heard a knock near the window, and there was a damn sparrow pecking at my window through the mesh. I was completely blown away, like, what are you doing, my friend? I immediately remembered that conversation with friends, and began to remove it from the window.

Both my friends and I...

0 0

12

I’ve never taken off the mesh for the winter, I didn’t even know that someone recommended taking it off))) They all stay the same at minus 15 and minus 20, nothing happens to the mesh afterwards, not once in many years , 12-14 for sure, I didn’t change the mesh, I just remade the new handles on one twice))) But the fact that it needs to be washed before winter and then in spring, that’s for sure, a lot of dust accumulates there. dirt, black water runs when I wash it in the bathroom under the shower, it seems like I washed it normally. And then I take a washcloth and wash it with soap, it feels like I didn’t wash it in the first place)) So I have to wash it three times, just rinse it, then use a washcloth with detergent, liquid soap, then the same thing, but just with a rag.
If you have somewhere to put this net for the winter, then I don’t see any problems, you can remove it. But I wouldn’t recommend it, because... This mesh traps dust when ventilating the room, even in winter such dust...

0 0

13

How to remove a mosquito net with torn off handles?

This is the second time I have encountered a situation where it is necessary to remove a mosquito net with torn or damaged handles. The first time I accidentally tore it off, I had to think. In the second, a neighbor made the same request. In both cases, the mesh was attached to Z-shaped plates,

we will talk about them. I haven’t dealt with other fasteners, so I don’t have anything to say about them.

How to remove the mosquito net installed by the craftsmen when installing the window?

Often, when installing a plastic window, future users of this same window forget to ask the craftsmen - How to remove the mosquito net they installed. It is possible to understand them. The joy that the renovation is completed, the dirt has been removed and the new window sparkles with its cleanliness can make you forget such a trifle.

However, despite the fact that installing and removing a mosquito net is a very difficult task...

0 0

14

View full version: Mosquito nets and winter

Do you remove mosquito nets from windows? winter period?
There is no extra space to store them. Is it harmful to their health to stay on the window during the winter?
For research purposes, I studied the windows of a neighboring house. Many still have not removed their nets. I suspect that some of them will not be filmed.

Mystery

19-11-2006, 15:26

I take them off, wash them and put them away for the winter :)) I use Velcro to stick them to the window, so they roll up nicely and can be stored compactly.

And within your framework, I probably think that nothing will happen to them, but unless you yourself breathe the dirt that has accumulated on them over the summer and autumn...

We are just within the limits. We don't film. Periodically I wash them and put them back.

Nastasya

19-11-2006, 17:05

We don't film.

I don’t take pictures, but this year I will. What if there’s a snowstorm, icing, icicles, and it falls. I once saw a mosquito lying around.