Electromagnetic lock with card. Features of using an electromagnetic lock with a card

You can buy electromagnetic locks for installation on doors or furniture in Moscow in the online store Technical Laboratory.

This type of locking devices has become widespread, as it is well suited for installation on all types of doors: metal, wood, plastic. Exist compact models for furniture, used in shop windows, drawers office desks and changing lockers in fitness centers.

Advantages of electromagnetic locks

Simple and reliable design

Due to reliability, installation of electrical magnetic lock recommended in hallways. There are no moving parts in it. The current passing through the coil winding heats it. ice does not form metal parts don't freeze.

If the door is closed carelessly, the electromagnet is not damaged and does not lose its functionality. There are no thin or fragile parts in it.

Simple connection of an electromagnetic lock and easy installation

In some cases, installation requires only a regular screwdriver. There are no problems with precise adherence to gaps; distortions during installation have minimal impact. On efficient work electromagnet, small errors during installation have practically no effect.

Versatility

The scope of application of this type of locking devices is practically unlimited. You just need to select the holding force corresponding to the weight of the door and select the necessary bracket for installation.

Manufacturers present a wide selection of dimensions of electromagnetic locks, allowing them to be installed on heavy front door, and in small drawers of cabinets or office tables.

Normally open type

When the power is turned off, the coil disappears and the armature is not held. The door is open and does not create problems when evacuating people from the building.

If it is necessary to ensure that the armature is held even in the absence of voltage in the network, install an uninterruptible power supply unit of 12 or 24 V.

Easy integration with access control system

In some electromagnetic locks, the autonomous ACS controller can be hidden directly in the housing. This can almost always be done in models designed for entrance doors. The controllers are small, especially when it comes to the compact Z5-R - simple and versatile, to which you can connect an exit button, card reader or code pad.

Connection diagram electromagnetic lock to the ACS controller looks something like this:

It is convenient to control this type of locking devices from the video intercom calling panel. An intercom kit with an electromagnetic lock can be installed on a wicket door or gate.

Electromagnetic locks: the choice of the Technical Laboratory

The models listed below cover 95% of cases where a reliable electromagnetic lock is useful.

• SL-150C It is characterized by its small dimensions, which allows it to be used in shop windows, furniture and light interior doors.

• Ml-180K with holding force up to 180 kg. Suitable for interior doors made of wood and plastic. Available in two versions: with strip and corner. Available in 2 colors: gray and brown.

• Chinese electromagnetic lock With affordable price and holding up to 280 kg. Inexpensive and fairly durable solution for the entrance.

• ML-295K also comes in two colors gray and brown. Water protection is provided on basic level. The set includes a corner convenient for installation on entrance doors. The corner has small symmetrical shoulders. If they seem inconvenient for a particular situation, order a bar, it is available as an option.

• Olevs M1-400. This lock has the widest selection of body colors. High holding force up to 400 kg, convenient installation angle. The only disadvantage for use in driveways and street doors– low level of moisture protection. Olevs M1-400 is not afraid of frost, like all locking devices of this type.
• OLEVS m2-400 differs from the previous model by the presence of a compartment with a terminal block with sufficient space for an ACS controller. This slightly increases the price of the M2-400 electromagnetic lock, but makes installation more convenient and reliable.
• For heavy doors, we can recommend an electromagnetic lock for 450 - 500 kg of one of Russian manufacturers. For example, . Choose better device in a cast casing. Almost all models with this holding force have a controller compartment. A large and strong corner is more reliable than a Chinese aluminum one with a similar hold of up to 500 kg.

Electronic lock is an access restriction device, the operating principle of which is based on the control of electromechanical or electromagnetic locking mechanisms with the help of timely power supply. Control of controller signals is carried out by reading information from magnetic cards, Touch Memory keys, biometric readers, keyboard typing, as well as by sending a signal from remote controls via radio signal. The main advantage of using such systems is the ability to quickly control access, without forming queues at the entrance, with preset parameters. Electronic locks are divided by type of installation: overhead or mortise. Rim locks are installed, if possible, inside the protected premises; mounting angles for fastening are often used, which are not always included in the kit.

Differences in the type of opening.

1. Unlocking using a magnetic card or key fobs. To open locking mechanism identification of the “key” is required. Each card or key fob initially has its own code, which is written at the time of installation. It is unique and cannot be changed during the operation of the device. The lock opens after reading the code from the identifier through direct contact with the reader or when the card or key generated by the device is in an electromagnetic field. In a magnetic field, the identifier is activated and begins to transmit a unique code via a signal path. The reader signals the receipt of information with a sound signal or a short-term light indication. The code is transmitted to the controller and if the combination of the electronic signal matches the stored data in the controller’s memory, an unlock signal is sent.

If more complex controller functionality is required, then a device with control is used software. A series of actions to record the time of entry and exit of certain persons, maintaining a log of visits or other events is carried out by a specially created program.

To open from inside the room (if there is no need to record the exit time), use a button with a reader bypass function. The main board receives a manual opening signal and “gives permission” to unlock the locking device.

2. Opening by entering a code on the dial pad. This type of device is used when high traffic and is often installed at entrances. Some modernized devices, to prevent the calculation of combinations of numbers, prompt the user to enter two additional random numbers displayed on the monitor. To open from inside the room, the “exit button” is also used.

3. Opening using biometric data. In this case, a signal to unlock the closing mechanism is given after identifying certain physiological parameters of a person. The most commonly used is a fingerprint. And if any other identifier (key, card) can be lost or transferred to another person, then the biological parameters remain unique. The data provided by the user is converted by the controller into a digital signal, which is compared with the code stored in the device’s memory.

To control mechanisms electronic locks A voltage supply is required, which is generated by a power source. The complete set of electronic locks can be supplemented with a video intercom with a calling panel.

Electronic door locks

Nowadays, there are many different electronic locks, most of them you can find on our website!

The complete kit should consist of the following components:

Main board (controller or terminal)

Reader (+ TM keys or cards)

Exit button

12V power supply

Electronic locking device

Video intercom with calling panel

A set of electromagnetic lock and access control equipment for organizing access to the premises using a card is intended for office interior doors.

Purpose and benefits

This kit can be installed on office metal, plastic or wooden door. Magnetic locks open normally. In the event of an emergency or power failure in the building, they will unlock the door automatically and do not interfere with the evacuation of personnel.

What is in the box

• Inexpensive electromagnetic lock for 300 kg. The kit also includes a convenient corner for installing a locking device on the door.
• Autonomous ACS controller IronLogic Z5R. Easy to set up model. The controller is trained using a special master card. If necessary, you can add a new user ID to the device memory or delete it. The controller's memory capacity allows storage of up to 1364 identifiers.
• Matrix II reader in Em-Marine format. Installed overhead on the wall near the door or on the jamb. There is an LED on the front panel.
• Exit button for opening the lock from the inside. Made of light plastic, the key is bright green. The case is durable and designed for long term use.
• Designed to last, Em-Matine key fobs conveniently attach to your key ring using a ring. Subsequently, you can purchase additional identifiers according to the number of office employees.
• 12 V power supply. In this set of electromagnetic lock with a card access system, a 1.5 A power supply is sufficient. The electric lock itself consumes no more than 400 mA in operating mode.
• Master card for programming a stand-alone controller.

Additional wires are available for purchase. At your request, the manager of the online store Technical Laboratory will perform the initial setup of the kit. Key fobs will be recorded in the controller's memory. This will save you time installing and configuring the kit.

You can buy a set of electromagnetic locks for organizing access to the premises using a card in Moscow in the online store Technical Laboratory.

The simplest and affordable way equip the door with an electromagnetic lock that will open when contactless cards are presented.

We recommend a kit for installation indoors, including on doors leading outside. The electric lock can be installed on wooden and iron doors as well as on doors made of metal and plastic profiles.

To install a lock indoors, the door must open outward.

Key Benefits

• A universal electromagnetic lock is used for interior and entrance doors.
• The kit is compatible with any video intercom and door closer.
• A universal normally open lock with a holding force of up to 400 kg, which does not create problems during evacuation.
• Lock M1-400 Available in various colors. Brown, white, grey. Copper and silver antique.
• Reliable and easy to configure standalone controller Z-5R.
• Programming is carried out using the supplied master card. IL-05E and does not require special training from the user.
• Easy controller setup. Produced according to instructions from the manufacturer or can be performed in the office before receiving the goods.
• Use Em-Marine cards and/or keychains in any combination with this set. For permanent employees - durable keychains with a key ring, made of high quality plastic. For temporary access: clients, builders - inexpensive cards.
• Metal exit button KN-05K with a mean time between failures of 100 thousand clicks to open the door from inside the room.

Installing an electromagnetic card lock

Our installers can quickly and efficiently install this kit on your door.

The electromagnetic lock is installed on the door jamb. A lock plate (anchor) is installed on the door leaf. The lock is connected to the controller by wire ShVVP 2x0.75. The controller is placed in a junction box on the wall or behind ceiling space. A reader is installed on the outside with inside exit button. The reader and button are connected to the controller using a wire KSPV-4x0.5 or twisted pair. The controller is connected to a 12 volt power supply. The distance from the controller to the power supply can be up to 15 meters. The power supply is plugged into an existing outlet.

The lock installation process is discussed in.

What needs to be purchased separately

• Twin-core installation wire ShVVP 0.75 mm2 for supplying power to the lock and controller.
• To increase the service life of the lock, we recommend purchasing a Dorma TS-68 or Dorma Сompakt door closer.
• You can order setup of the kit from us. We will assemble the entire system and register the cards. You can do this yourself by reading the instructions. Customization can be interesting when you are not confident in the skills and craftsmanship of the people installing the door. When the lock is sent far away and you want to check its functionality first.
• You can additionally order the required number of Em-Marine cards and key rings.
• If the number of users is more than 20-25, it is recommended to use a network controller, which can be used in the enterprise time tracking system.
• You can also replace the electric lock in the kit. Popular options
  • ML-295K can be installed outdoors.
  • ML-180A and corner LM-180A more suitable for installation on office interiors.
  • ML-280A and corner LM-280A best castle for profile doors. Check out others

Electromagnetic locks that open using plastic card, are used exclusively indoors. They are used by sensitive facilities, banks and financial institutions, enterprises that have an access control and management system, as well as companies in order to increase protection against unauthorized entry into individual premises. Such locking devices can be either part of a complex access control system or act as an independent unit.

Basic set of equipment for installing an electromagnetic lock with a card

For each specific passage point, it is necessary to select a locking device individually, taking into account a number of features: door material, its thickness, weight, intensity of use, etc.

A typical set includes the following components:

control controller, which is configured in accordance with system requirements and is responsible for the correct operation of the lock and related equipment;

an electromagnetic lock consisting of two metal plates that are held in a closed position by magnetic field;

reader electronic cards, working in a contactless manner. When you present the card, it recognizes its secret code and transmits a signal to the controller to unlock the lock;

mechanical exit button, activated when pressed;

a 12 V power supply that supplies current to the lock and keeps it in working order;

plastic cards.

On doors equipped with a magnetic lock with a card, it is also necessary to install a door closer, which is not included in standard kit supplies. It ensures smooth closure of metal plates without popping or damaging the electronic device.

Advantages of a magnetic lock with card

The magnetic lock, opened with a plastic card, has a simple and modern design, thanks to which we can highlight several obvious advantages of this device:

High reliability. Provided by electronic control and maximum simplicity of the lock. The magnetic field that holds the metal plates together allows them to withstand pressure weighing up to 2 tons.

Burglary resistance. Electronic identifiers (cards) are programmed for each user individually, after which unique codes are recorded in the controller’s memory. It is impossible to open the electromagnetic lock using another key.

Durability. Thanks to its simple design and the absence of mechanical elements, the lock is not prone to breakage and is not capable of jamming.

Personalization. Access cards can be programmed individually for different users, which allows you to record the passage time of each employee. The lock can also be configured to allow access to individual groups of users by hour or day of the week.

Instant door opening. Unlike traditional mechanical key locks electromagnetic device unlocks the door immediately after identifying the card.

Versatility. A magnetic lock with a card can be easily mounted on any door. In this case, the device will not spoil it appearance And overall design premises.

Installation of a magnetic lock

Electromagnetic lock with card mounted on a door made of any material. First of all, cables are laid between all elements of the system and power is connected. Then the stand-alone controller is installed. It is usually located in a lockable metal box along with the UPS and battery. The lock itself, consisting of two plates, is attached to the door using special brackets and door frame. The access card reader is connected to a wire and mounted on the wall outside the room. The exit button is installed in the same way from the inside. In some cases, it is replaced with the same reader.

After the installation of the equipment is completed, the correct connection of all elements is checked, the controller is configured, the cards are programmed and entered into the memory of the control device secret codes identifiers. Then the complete system is tested.

The catalog presents ready-made solutions for electromagnetic locks with a card, the price of which includes professional installation of the equipment. Call and order a suitable kit by phone