home

DIY snow globe from a jar. Making a snow globe with your own hands - the most New Year's souvenir

Many of you have seen a souvenir in the form of a transparent jar or bottle, inside of which fresh flowers, petals and herbs are intricately arranged. Today we will tell you how to make such beauty with your own hands. You'll be surprised how easy it is.

Even children can handle this master class. By the way, in art schools they often learn this technique. And this is understandable: simple, harmless components and an absolutely amazing result.

Those who love flowers, care about them and always find it very difficult to part with gift bouquets will especially like our tips. Now you have a chance to preserve the flowers dear to your heart for a very, very long time. Not in their original form, of course, but it’s still better than throwing the plants in the trash.

What do we need?

clean transparent container (preferably glass - it’s more impressive)
hot water
glycerin (you can find this in craft departments or even at the pharmacy)
petals, flowers, herbs
wooden skewer
water-soluble dyes (optional)

How to preserve flowers in glycerin?

The bottle needs to be thoroughly washed and dried. If the plants have stems, the ends should be split in half by a few centimeters (or millimeters if they are short). This is necessary so that the solution penetrates better into the flowers.

Tip: Do not use plants with damaged leaves. Also, do not take petals that are too thin, almost transparent.

In a separate container, mix water with glycerin in a 2:1 ratio (two parts boiling water, one part glycerin). Let the mixture cool until room temperature and pour it into our transparent container.

We immerse petals, herbs and flowers into the bottle. Using a wooden skewer, we “seat” them the way you like.

If you want to give the accessory some color, you can tint the water in advance using a natural dye (necessarily natural, since flowers do not tolerate chemicals). If uniformity of coloring is not important, but, on the contrary, you want a kind of fancy pattern, add the dye after you have mixed water with glycerin and poured the solution into a container.

Close the craft with a lid. In this form, it will be stored for at least a month (if there are only herbs and dried flowers inside - much longer). The solution will then become cloudy and will need to be replaced. To do this, simply pour the contents of the container into a bowl and carefully separate the plants from the liquid. Prepare new solution, fill it in, and you can leave the flowers the same.

6 299

Christmas tree in a jar. You've probably seen something like this New Year's toys: a glass ball filled with liquid, and inside there is some kind of snow-covered panorama, house or tree, and there is an imitation of snowfall. You can do something similar with your own hands.
Let’s call the project “Christmas tree in a jar,” well, I’ll just have a Christmas tree in a jar, and maybe you’ll have something else.

For the project we will need:
1. Jar with a lid.
2. Distilled water.
3. Glycerin (sold at any pharmacy).
4. Ceramic or plastic figurines of animals, trees and figurines of people.
5. Artificial snow, crumbly or glitter.
6. Epoxy resin and hardener (you can buy it as a set in the store).
7. Sandpaper.

First of all, you need to make sure that the jar is clean, you can, if you have it, take a round jar now there is a lot different forms, I will have a conical shaped jar. Next, you need to glue the figures, in my case the Christmas tree, to the bottom of the lid. Cleaning the bottom sandpaper for better adhesion and glue epoxy resin Christmas tree The resin is resistant to water and will last a long time, although it has a specific smell, but it will disappear.

Fill the jar itself with distilled water (do not fill the jar to the top). Be sure to add a little glycerin to the water, just a little (although I don’t know what kind of glycerin you have, add a little, if necessary, then add more). Glycerin changes the viscosity and density of water, it will stop our glitter, our artificial snow, will not allow them to fall to the bottom and guarantees our toy the effect of snowfall. Now we add our sparkles, or artificial snow to the jar (very small snow is not necessary for a good effect from large sparkles).

Then screw in the lid with our Christmas tree, turn the jar over and shake well. That's it, the Christmas tree is in the jar - it's snowing.
You can give the toy an additional design and place it on a pedestal, for example, a board in the form of a cut of wood. Add to that a couple of animal figures or fairy tale characters. The lid can also be decorated, painted or covered with something, it is desirable that it be possible to open it, in case you decide to modify the toy, and that’s basically it.

You've probably all seen glass balls with slowly falling snow. You just need to shake the ball (or turn it over) and movement begins inside the ball. Many of you bought these balloons as gifts for New Year in souvenir departments of stores. However, it is not necessary to run for New Year's gift to the store, you can make it yourself.

How to do snowball? And making a snow globe yourself is not at all difficult.

What we need to create a snow ball (required materials):

Base for a snow ball. This can be a purchased special container in the form glass ball, or a small jar with a screw cap.
New Year-themed decorations, figurines, figurines (to create the atmosphere inside the ball). If the jewelry is metal, we recommend that you treat it with this product to protect it from corrosion. Do you want to create an imitation of snowdrifts in a ball? Self-hardening plastic can be used for this purpose. You can create an original ball with a photograph inside, but before placing the photograph in the liquid it must first be laminated.
Glycerin solution (for a smooth fall of snowflakes). It can be bought at a pharmacy.
Distilled water (you can also use boiled water after it has cooled completely, but distilled water is better).
You can use food coloring to add a unique twist to your idea.
Snow flakes (artificial snow), sparkles, stars. You can make snow with your own hands. To do this you need to remove the film. eggshells and grind it. You can also use finely chopped rain.
Two-component epoxy glue (waterproof, transparent), aquarium sealant or glue gun

When you find all the necessary components, you can start creating a glass ball with snow inside.

Snow globe making process:

First you need to create a composition of figures so that it fits on the lid. Then glue the decorations to the lid and dry them.
Once the epoxy glue is completely dry, pour distilled water into the jar and add food coloring (any color of your choice).
Mix water and glycerin in equal proportions. But you can add a little more glycerin. In this case, snowflakes will fall more slowly.
Then add sparkles, snow, stars.
Coat the lid threads with glue and close the jar tightly. Let the glue dry.

Your snow globe is ready, shake it and enjoy the magical spectacle.

Instructions for making a snow globe.

TO New Year's holidays many strive to make the best gifts for their loved ones. If you don't have a lot of money, but have enough free time at your disposal, you can do christmas balls with snow. Such products will complement the interior and will remind you of you all the time, as well as lift the mood of the owner of the ball. At the same time, making such products is quite simple.

How to make a snow globe yourself from a jar with and without glycerin, with water: instructions, design ideas, photos

In order to make a ball, you will need an empty jar, preferably a beautiful one with a screw-on lid, some New Year's tinsel, glitter for the body, and also some kind of figurine. This could be a Kinder Surprise figurine or a small souvenir ceramic figurine that is purchased at a souvenir shop.

Instructions:

In order to make such a ball, you need to paint the screw cap with some kind of gold or silver paint.
The inner surface also needs to be painted. Next, apply a little glue to the figure and attach it to the lid. After the figure is securely attached to the lid, you need to fill the jar one third with glycerin and add water.
This means that it must be distilled or purified. You can also use boiled or chilled water. Pour water almost to the top, then chop the tinsel and pour it along with the glitter into a jar of water and glycerin.
Lubricate the neck of the jar with glue. Screw the cap tightly. If you wish, you can decorate it with sculpting from polymer clay. In exactly the same way, you can make figures that you can place inside the jar.

You can make such a cute ball without using glycerin, although you can buy it at the pharmacy for just a few rubles. Instead of glycerin you can use sunflower oil purified. It is desirable that the oil be refined and almost without yellow tint. This way you will achieve a perfectly beautiful, clean shimmer of sparkles. There should also be about 2 times less oil than water.

snow globe from a jar of glycerin

snow globe from a jar of glycerin snow globe from a jar of glycerin

How to buy a blank for a snow globe on Aliexpress: links to the catalog

Of course, it can be very difficult to find a suitable jar at home. The most ideal option would be baby food jars or canned food. Baby purees are sold in these jars. They small size and quite an interesting shape. There are round jars with flat bottom, they look very organic and nice. Please note that craft kits can be purchased at AliExpress. The best ones are sold here various banks , as well as artificial snow, glitter and small figures to create snow globes.

snow globe from a jar of glycerin

How to make a New Year's glass transparent ball with snow and a photo: ideas, photos

A New Year's snow ball with a photo will be an excellent memorable gift. This will take a little effort. Ideal option All series of photographs will appear on one strip. It is necessary that the length of the photograph is slightly less than the circumference of the jar.

Instructions:

You need to roll the photo into a tube and glue it together with a thin strip of tape to create a cylinder or tube.
After this, you need to laminate or tape the surface of the photo. This will prevent it from getting wet in the water.
Next, apply a little glue to the ribs and glue them to the lid. It also needs to be pre-painted. Start gluing the photo.
After this, pour glycerin into a jar, add glitter and crushed tinsel to the water. Apply glue to the neck and screw the jar tightly. Let the glue dry. You can admire your creation.

glass transparent ball with snow and photo

How to make a New Year's glass transparent ball with snow, sparkles and figures: ideas, photos

You can make any cute ball. To do this you will need all the same tools and items. This is glycerin, jewelry, and also figurines. Most often, such figurines are purchased in souvenir shops. You can also use small figures from Kinder surprises. Jewelry that you can make yourself from polymer clay is also suitable. Keep in mind that such products should not be painted. acrylic paint, but some kind of oil.

Because under the influence of glycerin, the paint can dissolve and then your liquid will become colored. If desired, you can paint the liquid in some color. To do this, use some food coloring. If you want to make blue, then blue will suit you; for pink, use a few drops of fucorcin. If you want to make green water, add a drop of greenery.

Such balls look very unusual if a New Year's landscape with Christmas trees and snowmen is used. Such products are complemented with tinsel, body glitter or small rhinestones. You can also use crushed polystyrene foam as snow.

New Year's glass transparent ball with snow

The best DIY snow globes: photos

Below are the most interesting options balls with snow. As you can see, making New Year's balls with snow is quite simple. You will need half an hour of time, cute figures and a beautiful jar. If you don’t have them in stock, you can purchase everything you need in craft stores or on AliExpress. Such products are extremely popular. If desired, you can supplement them with sprigs of dry grass or flowers.

VIDEO: Snow balls

How to make a “Snow Globe” with your own hands step by step with photos

Yunusova Alsu Rifkhatovna, teacher, MBDOU " Kindergarten No. 177", Kazan, Republic of Tatarstan
Description: A master class on an easy-to-make “snow globe”. A great option for a New Year's craft. Suitable for making by older children preschool age. Useful Application baby food jars.
Purpose of the master class: creating a New Year's "snow" globe with your own hands.
Tasks: introduce teachers and parents to the method of making a wonderful “snow globe”. Show the steps and tell manufacturing secrets.

New Year is a time of miracles and magic! Waiting for the New Year and preparing for it is probably even more interesting than the holiday itself. In kindergartens, teachers and children, in homes, children and parents are immersed in the process of creating New Year's mood. They decorate rooms, watch movies and cartoons, buy gifts and toys, interior decorations such as snow globes... Snow globes have long been one of the main symbols of the New Year. And snow globes made by yourself are symbols of creativity, magic and New Year's mood at the same time!

To make a “snow globe” you needed:
a baby food jar, glitter and sequins, a toy (this time my daughter and I chose Olaf the snowman), super glue, glycerin, water, rhinestones and ribbon or braid for decorating the jar, hot glue gun.

Ball manufacturing progress
The first thing you need to see is how the toy will look inside the jar, whether it is too small.

The photo shows that the toy is less than half the size of the jar, so I placed a hand cream cap under the toy, thereby raising the snowman above the middle. You can choose higher toys, there will be less hassle.

Next, I glued the stand and the toy with super glue. I used a lot of glue, one might say, I filled the edges. I left the lid with the toy to dry overnight. Hint: Even though it's super glue, when the layer is thick, it takes a long time to dry.

The next step was to prepare the liquid where the sparkles and sequins would float. The proportion of water and glycerin is somewhere around 50% to 50%. I always pour it on my eye. Maintaining the proportion exactly in milliliters is not so important. The sparkles are light, they fall for some time even in water.

Before adding glycerin to the water, I added glitter and sequins and stirred well so that they were saturated with water.

It's glycerin's turn. When adding it, you need to take into account the volume of the toy and stand (in my case).

I did a couple of fittings.

The main thing is when tight closure lid of the jar with the toy, the liquid should be exactly along the edge so that there is no air left in the jar.

All that remains is to decorate the edges of the jar. I used gold braid and rhinestones to match the color of the braid. I glued them on with hot glue.