Making a children's play wigwam with your own hands is not difficult. This will require a dense fabric (for example, cloth), a fabric with a pattern for decorative finishes wigwam, 4 long, strong, but light sticks and a sewing machine.
You can make a wigwam of any size, with three, four, five walls. We offer MK for the manufacture of children's wigwam with 4 walls.
See another MK "Teepee that does not need to be sewn".
Materials for work:
—
4 light wooden sticks, round in cross section, 180 cm long and 4-5 cm in diameter;
—
thick cotton fabric (for example, cloth);
—
1.5 m of cotton fabric with a pattern (for decorating the entrance to the wigwam, strings and decorations);
—
tape "contact" ("Velcro");
—
3.5 m of ribbon with pom-poms for decorative trim (optional).
Pattern details:
—
3 large triangles of dense fabric (skun);
—
1 small triangle of dense fabric (skuna);
—
2 large rectangles of fabric with a pattern ("entrance" to the wigwam);
—
2 rectangles each made of fabric with a pattern measuring 12X15 cm and 12X7 cm;
Description of work
Cut out three large triangles from cloth and one small triangle for the front of the tepee, then cut out two large and two small rectangles from patterned cotton.
Better than drawing triangles directly on the fabric, first make a pattern on thick paper and then transfer it to the fabric. Be careful and cut out triangles from the fabric, leaving a few centimeters for seam allowances, as well as for hem hem.
Cut out the details from the patterned fabric, fold and hem the fabric from the bottom, sew the ribbon with pom-poms on the left part from the top, right and bottom, and on the right part from the top, left and bottom. So you will issue an entrance to the wigwam.
On top of one of the large cloth triangles, place two rectangular pieces of patterned cloth right sides up. Lay the details of the fabric with the pattern with the edges decorated with braid facing each other. Trim the edges of the rectangular pieces that extend beyond the edge of the felt triangle diagonally, flush with the edges of the triangular felt piece. The rectangular details of the “entrance” to the wigwam will overlap.
Sew to each other the details of the "entrance" to the wigwam from fabric with a pattern in the place of overlap.
Tiebacks for the details of the "entrance" to the wigwam. Take 1 rectangular piece measuring 12x15 cm, fold in half lengthwise right side inward and sew first along (along the long side of the rectangle), then across only on one side. Turn the part right side out, straighten and iron. Overcast the raw edge of the part. Repeat the same steps with one more piece 12x15 and two pieces 12x7 cm. Sew 1 long piece of pickup on the right side of the left part of the “entrance” to the tepee, and sew a short piece of the pickup at the same level from the wrong side of the part of the “entrance to the tepee. Also sew the details of the pickup to the right part of the "entrance" to the wigwam. Sew pieces of Velcro tape (tape "contact") along the edges of the parts of the clamps.
A small triangle of cloth must be sewn to the details of the "entrance" to the wigwam. This triangle, if desired, can be decorated with appliqué or embroidery. In this case, such a triangle is decorated with an application in the form of a simple circle, to which a crocheted heart is sewn.
Sew all 4 sides of the wigwam together to form a pyramid. Treat the upper edges of the details of the walls of the wigwam with overcasting, oblique trim, or fold them inside the future wigwam and sew.
The last thing to do is to sew the "covers" for the sticks, which will be the frame of the entire wigwam. To do this, you need to cut out 4 rectangular parts from dense fabric (cloth), equal to the length of the inner seam connecting the “walls” of the wigwam. Measure it with a measuring tape, turning the pieces of the wigwam sewn together inside out. The width of these parts is equal to the diameter of the sticks you have chosen for the wigwam, plus 2 cm seam allowances on each side of the “cover” part. Sew each of the four parts of the "cover" to the seams connecting the walls of the wigwam in the same way as sewing a bias trim when processing the edges of the products. How can this be done.
All that remains for you to do is insert the sticks into the "covers" and tie them on top with tape or rope. For reliable fastening of the structure, you can drill holes in the sticks, stepping back about 20 cm from top edge each stick and tie them together by threading the rope through these holes.
All children love nooks and crannies. Only in solitude can you give free rein to your imagination and go on an exciting journey through imaginary worlds. That is why children often build makeshift houses from pillows, blankets and other improvised means. But if you want your child to feel like a brave traveler or the hero of his favorite fairy tale, give him a hut. Moreover, it is quite easy to make a hut for children with your own hands, but the child will be able to fill his leisure time with exciting games. Today, "Dream House" will share with its readers ideas for building children's huts, which can be installed both in the children's room and on the street.
To make a hut, it is enough to stretch the rope between the trees, throw a sheet over it and secure its edges with wooden pegs or other suitable means. To make the child comfortable, lay soft blankets or blankets on the ground. And even if there is nothing supernatural in such a "structure", but a child's imagination can fill it with an exciting story. Homemade hut for children on the street will give a lot interesting games And, besides, it will save kids from solar overheating.
When choosing a place for a hut, give preference to darkened and flat areas.
An ordinary gymnastic hoop can be an excellent basis for a children's hut. It is enough to sew a long fabric to the hoop and hang it in horizontal position, for example, to a tree branch at such a height that the edges of the fabric reach the ground. Alternatively, you can simply throw a large piece of dense fabric over the hoop, build a cone-shaped roof and fix the frame on comfortable level. Then, to hang the hut, you only need a reliable strap or tape.
Probably every child dreams of traveling around the world, dangerous adventures and exciting travels. It is possible to help a child realize his cherished dream without going beyond the aisles of his own suburban area. Since brave travelers prefer to sleep not in a warm bed, but in a hut made of tree branches, made by hand, the baby will surely be delighted with such a gift.
But how to make a children's hut from branches? There are several interesting options:
The tepee hut is traditional house Indians. This building has a conical shape and a strong structure. Previously, the Indians built their dwellings using thick branches, which were then covered with thick canvas. We can also make a children's hut on the principle of a wigwam. To do this, you need to pick up 5-7 flexible, but strong twigs, and then install them in the shape of a polyhedron or a semicircle. The tops of the twigs should be connected in such a way that they are combined like flowers in a bouquet, overlapping each other. At the junction, the twigs must be secured with a strong rope or piece of fabric.
If you are setting up a wigwam outdoors, dig the bases of the twigs into the ground a little. If the wigwam will be indoors, tie transverse twigs at the bottom of the structure, which will secure the structure.
After that, decorate the wigwam with a cloth. Most often, triangles form between the nearby twigs of the hut, so it’s enough just to cut out pieces of fabric in this shape and sew them around the frame. However, it is much more beautiful if the wigwam hut is decorated with a specially sewn cover, to create which you will need to carefully measure the height of the frame and the width of each of its parts.
Having done simple design from several wooden slats, you can create a beautiful gable hut or hut-tent. The most important thing in this building is to choose the right fabric. If you are setting up a hut in the yard, it is best to use a tent fabric that does not fade from the sun and does not deform due to high humidity. If the structure will be in the child's room, cotton or any other natural material will do.
If you are not confident in your abilities or simply do not want to spend time making a homemade hut, you can purchase a finished design. For example, beautiful and easy-to-play huts are produced by the Swedish brand IKEA. Such structures are suitable not only for games, but also for. In addition, the branded hut will surely become the main decoration of the children's room.
As a hut, you can also use a stylized awning or roof on the bed. This accessory will not only give the baby a world of exciting games, but also provide him with a sound and restful sleep.
One of the most exciting children's holidays is approaching! Not every parent is ready to present something grandiose to their child, so today we will tell you how to make a truly useful and inexpensive gift with your own hands - a wigwam. Our editors have prepared simple instructions describing all the stages of work, so this year your child will receive a new one, and you will have a few hours of free time while your child is hiding in a secluded corner.
The ancient Indian refuge has long been registered in the apartments of Europeans and Asians, but in fact, it has become a unique home for thousands of children from all over the world
A wigwam is a man-made dwelling of the Indians, which has a simple structure. In fact, this is a small hut where the whole Indian family could live. In real conditions, it was covered with branches and animal skins. Such housing was available to everyone. So we decided to follow the ancient Indian tradition and tell you by what principle you can create for your child in just a couple of evenings cozy corner for relaxation and solitude.
Important! If you are going to build a hut with your baby, take care of safety in advance: remove nails, screws, bolts and other dangerous items away from your child.
An important part of our work is wooden bars. You can buy them at a hardware store. It is very important to determine the height. For the simplest hut, we need 4 long rods and 4 rods for the base. They should be shorter.
However, if you have familiar plumbers, then it is quite possible to build an interesting structure from. In this case, you will simply need to ask to saw off the required height and buy special adapters for fastening the edges.
The child must develop, find exciting activities and always be in good mood. Of course, this is impossible without the help of loving parents. A handmade Indian wigwam for children can be a wonderful gift that will delight any kid. Such a house will the best place for fun games, reading or relaxing.
Children often surprise others with their rich imagination, imagining themselves as Indians, captains, heroes or princesses. Whoever your child is mentally reincarnated as tomorrow, he will definitely like an exotic hut, which, depending on the decor, can be made into a girl's tent or a haven for a brave leader. Making a wigwam for children with your own hands is an easy task, especially if parents really want to help development creativity child.
Moms and dads, who seriously decided to please the baby with a miracle tent, without giving money for a finished toy, strive to learn how to make a wigwam for children with their own hands, and immediately get to work. But first they need to memorize a few simple tips to make the hut comfortable and unique:
To make such a hut, you need to purchase the following materials:
The kid in the hut should have enough space, otherwise he simply does not want to be in the "room" where he cannot take a comfortable position. What to do if your child is tall or dreams of a big fabulous tent? Make a spacious wigwam for children with your own hands, using step by step description stages of work! The area of the building depends on the number of support points, so you will need 5 wooden slats of the same size. In addition, the "builders" need to stock up:
Of course, you can act according to the previous scheme and replace the buttons with threads. But in this case, you will have to remember the skills of cutting and sewing again, and your wigwam will not be able to be disassembled and assembled again.
kayabaparts.ru - Entrance hall, kitchen, living room. Garden. Chairs. Bedroom