How to disassemble a lock with a round handle. Clear instructions on how to remove the latch handle

It will be useful for any owner to know how to disassemble the handle on the door, especially the interior one. This fitting is subjected to a serious test by all tenants, so someday it will fail, and it will need to be replaced with another one. In this case, you do not need to call specialists, you can handle it yourself, while saving on the employee's wages. Moreover, this business does not require great skill, but only a little skill. The dismantling process may differ depending on the type of handle, but the whole process should not cause any particular difficulties.

How to remove the handle from interior door? Before proceeding with the analysis of the mechanism, you need to find out what kind of classification it belongs to. The division is based on several criteria. The one described below is suitable specifically for parsing a pen, because it has a classification according to design features.

Varieties of handles

Press. Such a handle is attached on both sides of the door leaf and has an L-shape. Opening occurs due to the load on the handle, after which the tongue is set in motion. The disadvantage of this fitting is that it is very traumatic.

Swivel. The opening method is the same as that of the push, only the tongue is set in motion not by pressing the handle, but by turning it. Such models are often not very convenient, because to scroll it, you need to have your hands dry, otherwise they will slip. When replacing them, a reasonable question arises about how to unscrew the interior door handle.

Stationary. This handle does not have a latch. It is attached with screws directly to the door leaf. It happens one- or two-sided, while it has an axial connecting element.

Reasons for parsing a pen

It is not so difficult to disassemble any of the models of door handles, because they have a similar design.

At the same time, it is extremely rare to carry out the analysis of this fitting. What reasons can lead to this? How to remove the handle from the interior door?

The first reason is breakdown. It occurs most frequently. Often, inexpensive Chinese models are prone to breakdowns, which are not designed for a constant and rough load. If the prevention of some elements is not observed, then the fittings become unusable. It should be repaired, and sometimes the entire element should be replaced.

The next reason is the need for replacement. Every year the market is replenished with new and improved models. At the same time, you can choose color scheme suitable for the interior, or put a new, more functional and reliable model.

Renovation in a room often involves a change in style. Do not ignore the door handles. Therefore, the question often arises of how to disassemble door handle.

Another reason is spoiled appearance. If the part is made of low-quality material, then scuffs and scratches will be visible on it very soon, which negatively affects the entire interior.

Removing the push handle

How to remove the handle from an interior push-type door? This mechanism is more difficult to disassemble, because in its design there is an axis rod, due to which the handle is held. It is tightened with a tetrahedron.

The process of parsing the handle must begin with the removal of the plugs around it. They are fastened with screws or tightly pressed. They are very easy to remove with a minus screwdriver.

On one side of the door, you need to unscrew the fittings and remove. Then the second part is removed, on which the axis rod remains.

If the handle is with then it is also removed.

Following the sequence and accuracy will allow you to remove the mechanism without problems, without damaging the parts and without creating unnecessary hassle.

How to remove the handle from the interior door rotary with a rosette?

When there is no hole on the side of the swivel type fittings into which a key or screwdriver can be inserted, the elements are separated manually. Both parts of the handle should be scrolled in different directions and gradually removed from the thread. On one of them there will be an axial rod.

In this way, the socket is removed and the screws are unscrewed. When the axis is removed, you can do the following elements - a latch or lock, if necessary. When decorative parts are removed, you need to monitor the use of your strength, because overdoing it can damage the elements.

Removing the rotary knob

The handle with a lock for interior doors of a rotary type is removed as follows.

This will require a key to clamp the spring mechanism. Often it is not included in the package with the product, but it can easily be replaced by a nail or other thin object.

The first step is to remove the decorative plates, which can simply be pry off with a sharp object.

Use a key or nail to move the spring-loaded pin by inserting the tool into the technological hole located on the side. At the same time, pull the handle and remove it together with the cap.

After that, you need to move the fastening screws located on the plate. Then the two parts of the handle can be removed together with the axle.

Assembling the round door handles back is not difficult, only all the steps must be done in reverse order. First comes which is fixed with a plate, then an axis is inserted, fasteners are put on it. Decorative inserts installed last. The main thing is not to forget that the decorative flange is first threaded, and only then the main part of the handle is attached.

Removing the fixed handle

How to disassemble a fixed type door handle? They are the least likely to break or deform. This is due to the lack of moving elements in it. Often doorknobs of this type after removal, they do not repair, but change entirely. The withdrawal process is as follows:

1. Self-tapping screws are unscrewed with a screwdriver.
2. One part is unscrewed from the rod, and the second is removed along with it.

This design may not have a central rod, which greatly reduces the process. You only need to choose the right screwdriver to unscrew the screws of a certain diameter.

Removing the latch handle

First of all, when dismantling the latch handle for interior doors with an automatic lock, you need to remove the screws with a screwdriver. Next, unfasten the overlays. Use to unscrew the rod.

After that pull out rotary mechanism coiled with a spring.

popular way

There are several ways in which the latch handle for round-shaped interior doors with a latch is removed. Here is the most popular one.

It is necessary to remove it with a screwdriver, first from the part where the latch device is located. It is necessary to press on the opened stopper and at the same time pull the handle towards you.

Then the latch is pulled out, for which the screws are unscrewed, after which the latch is released.

Thus, disassembling any door handle with your own hands is not a big problem.

It will be useful for each owner to know how to disassemble the door handle on the interior door. This element is exposed daily to the residents of the house, and the handle is not always handled with care, and therefore sooner or later it may break or you just want to change it to a new model. In this case, in order not to call the master, you can do everything yourself. In addition, it is not so difficult to disassemble and assemble the door handle on your own.

Different types of door handles are disassembled in different ways

Types of handles

Before starting work, you need to decide on the type of fittings. All door handles can be divided into several groups. This classification is perhaps the determining factor in disassembling the structure. So let's take a look:

• Stationary. Not connected in any way to the lock and latch. Serves solely to move the door leaf. Fastens with simple screws or self-tapping screws. It can be one-sided and two-sided, connected by an axial element.
• Press. Usually it has the form of an L-shaped structure with fastening on both sides of the web. When a load is applied to the handle, it sets the latch tongue in motion and allows the door to be opened by pressing.
• Swivel. The principle of operation is the same as that of the pressure model, but at the same time you need to turn the handle, most often such models look like a ball or button.

The main types of handles for interior doors

Due to its shape, the pressure model has a certain disadvantage: it can be easily hit. The disadvantage of rotary samples is that a person's hand can slip on its surface, which makes it difficult to open the door.

There are also models with a decorative flange and a rosette. What are their main differences? When using an outlet, you do not need to drill a huge hole in the door. In addition, such a handle is full-bodied and heavy. And here decorative overlays are usually large in diameter and are mounted on light hollow knobs with a lock or latch. Both options are worth considering.

Why disassemble the handle

Since these models of door handles are disassembled quite simply and according to similar principle, everyone can easily learn how to do it. But disassembling and assembling handles is not a routine process, the need for this does not always arise. What could lead to such a need?

• Breaking. This is one of the most common causes, especially for cheap Chinese products. Over time, or as a result of rough handling and ignoring preventive measures, the mechanism wears out and some of its parts fail, so it is necessary to carry out timely repair of accessories.
• Replacing an outdated model. Every year new models of products enter the market and it makes sense to replace old samples with more advanced ones in technical and aesthetic terms.
• Repair. When carrying out repairs in a house, most often the interior changes dramatically in terms of style, so the old door handle may not be suitable and then it needs to be disassembled and replaced.
• Scuffs. The lower the quality decorative coating, the sooner such a pen will become unusable due to the appearance of scuffs, peeling paint or chips on its surface. It is better to replace such fittings if you do not want to spoil the overall impression of the room.

During long-term operation handle mechanism often fails

push

The most popular model of interior door handles is push. In order to disassemble this type of product, you need to take only one screwdriver. First, unscrew the handle itself, that is, the pressure element. On the side or bottom of such models there is a small recess with a hidden screw, you need to unscrew it with a screwdriver and then remove the element from the axis. In some cases, a hex wrench may be needed instead of a screwdriver.

After that, remove the decorative trim that masks the main mount, in most models it is threaded, so you just need to turn it a few times. The screws will open in front of you. Carefully unscrew them and pull the structure towards you, holding the handle on the other side, now you can remove it together with the rotary axial element.

If you need to disassemble the latch or lock, the steps are carried out in the same order, but in addition you need to unscrew the plate from the end of the blade and remove the mechanism installed in it.

push door handle

Round with rosette

Now let's look at how to disassemble a round doorknob. The principle of work is very similar, but the main difference lies in the way the decorative turning part is removed. If there is no key hole or screwdriver on the side of the handle, then you need to manually separate the elements. To do this, hold the handle motionless on one side of the door, and turn its second part and remove it from the thread, you may just need to pull it towards you.

After that, remove the socket in the same way and unscrew the screws. Remove the axle and proceed to other elements: a lock or a latch, if necessary. When removing the decorative parts, it is important not to overdo it so that some elements of the mechanism do not burst.

Round door handle with rose

Nobs

In order to disassemble the round nob handle, you will need an additional special key to tighten the spring mechanism.

The key included in the kit may not be suitable in length, in which case it can be replaced with a nail or other thin object.

First, remove the top trim. Using a wrench or a nail, move the spring-loaded pin by inserting the tool into the technological hole on the side, at the same time pull the handle and remove it together with the cap. After that, you need to pry off the latch of the decorative flange and also remove it. Then unscrew the fixing screws on the plate. Now you can completely disassemble the handle and remove both of its parts along with the axle.

As you can see, there is nothing complicated. In order to assemble the handle, you need to perform all the manipulations in the reverse order: first, the lock is installed and fixed with a plate, after that the axis is inserted and the fasteners are put on, and only then the decorative parts are assembled. Do not forget that you first need to thread the decorative flange, and after it, put on the pressure or turning part itself.

The door in the house is playing important role and perform various functions. There are many types of such designs that can be complemented by certain accessories, such as handles.

This product is a kind of mechanism that allows you to open a kind of damper. modern doors onyx are completed different kind handles, allowing you to choose them for a certain style of the room.

Analysis of pressure structures

Pens of this type are very popular and are used everywhere today. In order to dismantle such a product, you often need only one screwdriver of a certain size.

The parsing process can be divided into several stages:

• First of all, you need to unscrew the special screw, which can be found on the side or bottom. All this depends on the model. Sometimes, instead of a screwdriver, you need to use a hex wrench that needs to be sized. Then remove the decorative trim.
• At this stage, you need to unscrew the main mount, which is threaded. To do this, simply turn it several times in a certain direction.
• When all fasteners are unscrewed, you can remove the handle. To do this, simply pull it towards you, slightly holding the other side of the product.

Consider how to dismantle round-type door handles, which can be divided into two types:

• Products with a socket. It's pretty easy to parse them. To do this, first of all, you need to look for a screw mount, in the form of a bolt or screw. Unscrew it and remove the handle. When such an object is not provided for by the design, then you need to hold one side of the product, and turn the other a little, remove it from the thread and pull it towards you. After that, you can proceed to dismantle the socket and other constituent parts castle.
• Noba's handles. This type of product is much more difficult to disassemble. To do this, it is recommended to use a special key with which you need to clamp the spring mechanism. First of all, we remove the decorative trim, after which, using a key or a nail, we shift the spring-loaded pin. All this is done in a special technical hole. Then gently pull the handle and remove it. Remember to also remove the latch from the decorative flange by lightly prying it.

Dismantling the handle is a fairly simple procedure that just requires care and the right sequence.

How to disassemble the door handle knob, see the video:

Situations in life are different, and therefore it is worth playing it safe and learning how to install, disassemble and repair door locks. In addition, all this is done extremely simply, especially for those who have basic skills at home. repair work. So, let's look at how to disassemble yourself door lock interior door.

Sometimes it becomes necessary to disassemble the interior door lock

Why dismantle the lock

Consider in which cases it may be necessary to disassemble the lock on the interior door:

• Jamming. Over time, it may be necessary to lubricate or adjust the position of the mechanism in the canvas.
• Breaking. If the part wears out or is handled roughly, the system may fail and then repair or complete replacement of the lock will be required.
• Replacement. The need arises when you want to use a more advanced and reliable model, repair or due to a breakdown.
• Permutation. If you are changing the door leaf, you can use the handle and lock from the old sample.
• Key loss. Using complex systems such an annoyance may arise. To get into the room you need to disassemble the larva.

Before installing a new door lock, try to assemble the newly removed mechanism to prevent errors when assembling a finishing sample.

Most often, the need to disassemble the lock arises due to its breakdown.

To better understand how you can remove a door lock from an interior door, you should consider their classification. So, let's look at the types of interior locks:

• Fale tongue with a handle. This is standard interior lock, which serves only to temporarily fix the web in the closed position. The tongue retracts when the handle is pressed. There is a special type of product - round rotary knobs, a lock with a latch is pre-built into such a handle, which additionally blocks the door.
• Latch. It is installed additionally to block the door from the inside, there is a keyhole or a plug on the outside. Often such locks are mounted on a bathroom, toilet or living room.
• Secret mechanism. Such systems are installed much less frequently, they are mainly used to restrict access to living rooms. This is the same mechanism as front door, but often simpler. The most popular types of locks are cylinder and lever locks.

Kinds lock mechanisms for interior doors

Let's take a closer look at how to parse each of these types.

Lock with handle

The simplest and most common option is a lock with a handle. It could be like simple latch without locking, and a more complex mechanism that involves the use of a key. How to deal with such fittings?

First of all, you need to take care of removing the handle itself. To do this, unscrew the screw from the side or bottom using a screwdriver or a hex wrench. For nobs, a special key is used to lock the spring-loaded pin. Then remove the decorative trim and unscrew the fixing screws. Remove the handle together with the axial part. This will give you access to the lock mechanism.

Scheme of the device of an interior lock with a handle

In order to disassemble the lock itself, you must first unscrew the plate from the end part. it can be held by 2-4 screws. After that, removing the tongue with all the other details is not difficult. You just need to push them in and get through the hole in the door leaf at the place where the handle was installed.

Latch

For a latch lock, there is a slightly different, but nevertheless largely similar principle of operation. In order to disassemble such a mechanism, you will need to initially remove the part that is located on the front side of the door.

To do this, unscrew the decorative cap from the side of the plug, it is often attached to the thread, but there are models that are fixed on the latch. After that, unscrew the screws that have opened to you and carefully remove the mechanism, including from the reverse side.

Scheme of the interior latch device

To remove the lock, unscrew the end plate and gently push the inside of it. If the latch is connected to the handle, you will need to completely disassemble both to get the part you are interested in.

If you plan to completely replace the lock, do not forget to unscrew the strike plate on the door frame.

Complex locks

Another question – how to disassemble the interior mechanism door lock, which is closed with a key and contains more complex details at its core? We are talking primarily about such types as a cylinder and lever lock.

If we talk about the cylinder, in order to remove it, you need to unscrew the plate from the end and remove the front front part. This is done in the same way as in the case of the latch. Then using a screwdriver or other handy tool carefully slide the lock so that it can be removed from the end of the blade.

Diagram of a complex lock device

If the mechanism uses the fixation of the larva, you need to turn it slightly with the key, setting it in such a way that its position does not interfere with the movement of the lock. When carrying out work, try not to damage the internal parts.

The lever lock is even easier to deal with. In order to get it out of the door, you also need to unscrew the plate and gently push it to the edge. When at least half a centimeter is released, you can pick up the lock with your hands or pry with a screwdriver. In any case, you must act with extreme caution so as not to damage the parts, otherwise the further operation of the mechanism may be in question.

The door lock has to be removed not only if it is replaced due to a breakdown. Like any other mechanism, the lock needs periodic cleaning and lubrication. The reasons for the removal of locks are different. You can call the master to remove the lock, but you have to wait. When there is no time to wait or there is no money for the master, you need to know how to disassemble the interior door lock yourself. It is not difficult to do this. To do this, you need to know how the most basic types of locks are disassembled. If the lock began to jam, it is necessary to find out the cause and eliminate it so that you can safely close and open the door. It is better to prevent a breakdown than to fix it later.

Stages of work: how to disassemble a round lock

Locks are installed on the entrance and interior doors. The most popular were recent times round handles with built-in locks. In their design there is a latch tongue, with the help of which the entire lock mechanism works. Swivel knobs may have a built-in lock that closes the door. To disassemble the round lock, you need a key. It comes with a lock included.

In order to find out why the handle broke, it is worth disassembling it and making sure what is the reason.

If the key is not at hand or it is broken, you can use any thin object to clamp the spring mechanism.

Steps to disassemble the nob handle and remove the lock:

• Clamp the spring mechanism;
• Move pin;
• Pull the handle;
• Remove the pen together with the cap;
• Remove the flange latch;
• Unscrew the fasteners on the plate;
• Completely remove the handle (its two parts).

It is necessary to move the pin with a key, inserting it into the hole that is located on the side of the handle. This must be done carefully. The lock is removed along with the handle, as it is built into it. This type of lock is mortise. It is also called round, since the handle itself has a spherical shape.

It will be more difficult to disassemble the front door lock. He may also have round shape, but is built into the door separately from the handle. This one is more complicated than interior models. They are cut separately from the handles into the door leaf. Mortise locks may represent a cylinder model. They work with the help of a larva, which is a fixative. You can pull out the lock yourself. The cause of the breakdown may be in the larva. You can replace the larva itself or change the entire lock.

How to disassemble an interior door lock: the necessary tools

Many interior doors are equipped with handles that have built-in locks. Usually, such handles are installed on the doors to the bathroom or toilet. Often, owners save on fittings, so they install an inexpensive one. The locks in them can fail: the tongue sticks, the handle does not work, the key is stuck in the lock. These problems can be solved independently. The lock must be accompanied by instructions for disassembling it. If there is no such instruction, then you yourself need to understand how to disassemble it and fix the breakdown. It is necessary to find out the device of the lock in order to dismantle it.

The dismantling process may differ depending on the type of handle, but the whole process should not cause any particular difficulties.

For work you will need:

• Screwdriver;
• Pliers;
• adjustable wrench;
• A sharp object (awl, needle, hairpin).

Initially, you need to remove the overlay from the blocking button. After that, you can remove the mechanism itself.

The above tools are almost everyone in the house. You need to act carefully so as not to damage the decorative lining, the lock itself or the handle. Work should be done calmly and in stages.

Five ways to open the door: interior locks with handles

If the key is lost or broken, you have to open the lock yourself with improvised means. In any house there are objects with which you can open the door lock in order to repair or change it. Dismantling the lock is optional. Sometimes you just need to urgently open it to get into or out of a room.

It is important not to rush, knock out the canvas or break the lock - this is an extreme measure. You can return the mechanism to the "open" position using improvised means

You can open the lock with the following items:

• sheet of paper;
• plastic cards;
• Knitting needles;
• Screwdrivers;
• Shila;
• Knife;
• Files.

You can open the lock quickly: you need to insert a card or a sheet of paper between the canvas and the jamb. Push tongue. The mechanism will move and you can turn the handle.

After inaccurate emergency opening of the lock, it may be necessary to replace it. It will have to be removed from door leaf and put in a new one.

Interior latch locks: causes of failure and analysis

The reason for the jamming or breakage of the lock can be: accumulation of dust in it, lack of lubrication, ingress of a foreign object, opening the mechanism with a non-native key.

In order to open a lock of a simple configuration, you will need improvised tools that are in every home.

Exist mortise lock with latch. Jamming can occur due to sticking of the tongue. The assembly of such a lock includes a spring mechanism. When broken, the tongue cannot move due to the spring.

To open such a lock, you must do the following:

• Move the tongue and tilt it to the side;
• Click on the handle;
• Drive the tongue inside the castle;
• Pull the door towards you.

If the door slams shut with the latch turned, you need to insert thin tool under the handle, turn and take it out. After this action, the latch should fall into place.

How to remove the lock from the interior door (video)

When parsing any model of the castle, it is worth considering its structure. It is necessary to follow the sequence of actions when disassembling the lock. It is easy to disassemble the mechanism, but it is still worth reassembling it correctly. Carrying out the analysis slowly and carefully, after removing it, you can repair it and put it again. Sometimes the cost of a spare part for a lock is more expensive than the lock itself. In this case, it is easier to replace it completely and use it without any obstacles.