How to make a liquid that glows in the dark. How to make glowing water at home

Glowing water can create a mystical, mysterious atmosphere with neon glow in a dark room without electricity or real neon. you can prepare glowing water within minutes with a few simple ingredients. Some of them may already be in your home. Explore these simple methods already today to prepare "something special" for the next Halloween or party.

Steps

Tonic preparation

Pour a portion of the tonic into a transparent container. Believe it or not, the most common tonic glows quite brightly under black light. To get the glow effect, first pour the tonic into a transparent container. It can be poured into pure form or diluted with water. However, than more water you add, the weaker the glow will be.

• Tonic is sold in most grocery stores and supermarkets and costs only 150-200 rubles. Buy a tonic not soda or soda. The label should say "with quinine" or something like that.

1. Shine a black lamp on the tonic. All you need to do to make the tonic glow brightly is to shine a UV light on it. Be sure to deliberately dim the lights in the room, otherwise it will be more difficult to see the glow effect.

   Don't be afraid to drink tonic. The black lamp makes the tonic pretty strange glow, but it does not become poisonous, radioactive or harmful to health. However, tonic water is often high in calories and sugar, so drink in moderation.

   Marker based cooking

   1. Buy and test markers to make sure they glow. Not all markers glow brightly under a black lamp. So draw something on paper and shine black light on the drawing to check it.

      • You can choose any color, but yellow is the most likely to glow in the dark.
      • Markers from any manufacturer should work for this purpose, but you can try neon colored markers for variety.
      • Determine if the marker glows perfectly dark room completely isolated from light.

   2. Fill a clear container with water. Tonic is not the only substance that contains luminous phosphors. Ordinary old markers create almost the same effect. To start (as before), pour water into a glass container, such as a glass jar.

      • Please note that for this method you will have to break the marker. You won't be able to use it anymore.

   3. Remove the ink tube from the marker. If you just put the marker in a jar of water, the ink will take a long time to flow out of the felt insert through a thin rod. Instead, use an ink tube. For this:

      • Remove the cap from the marker.
      • Use pliers (or do it by hand if you don't mind getting dirty) to pry out the ink felt insert.
      • Break apart lower part marker with pliers.
      • Carefully pull out the ink tube to avoid getting dirty or dripping on your clothes.

   4. Put the felt insert and ink tube into the jar. Add the felt insert, ink tube, and any leftover ink from the marker to the water. The ink should flow and dissolve in the water, changing its color. If necessary, cut or break the ink tube to remove the remaining ink. Mix well to obtain evenly colored water.

      • You can optionally remove or leave the ink tubes and felt inserts in the water when all the ink has drained out of them.

   5. Shine a black light on the water. The ink water will glow exactly the same in a dark room with a black lamp as the tonic water in the previous method. To create a glow, you can also stick a flashlight to the bottom of a glass container with tape (however, in this case, the “neon” effect, which can only be obtained under the light of a black lamp, will be lost.)

      • Unlike tonic water, this luminous water not drinkable.

   Fluorescent paint preparation

   1. Buy fluorescent paint from a hardware store. The paint must be tempera based or water soluble so that it can be mixed with water. You can also buy glow-in-the-dark painting paints to enhance the glow effect.

      • Just like with markers, you any will do neon paint color, but lemon yellow and lime green are best suited for this purpose.

   2. Pour the paint into a glass of water. To enhance the glow effect, add more paint. A couple of tablespoons of paint may be enough for one cup of water.

   3. Mix the paint thoroughly. Use a stirring stick or any similar tool, but not a kitchen spoon. The paint must be completely soluble in water.

      • in warm or hot water the paint will dissolve faster.
      • If you leave the water for a long time without moving, the paint may begin to precipitate. Use this luminous water immediately after mixing.

   4. Check water efficiency. Completely turn off the lights in the room and turn on the black lamp directly above glowing water. Use this luminous water with caution: it contains paint, and if it gets on the fabric, it can leave serious stains.

      • Received liquid it is forbidden drink.

   Glow stick preparation

   1. Collect water in a container and prepare materials. According to this method, to prepare colored water that will glow without a black lamp, you will need plain water, glow sticks, and a few other readily available ingredients. As in the methods described above, first pour water into a transparent container, such as a bottle or jar. You will also need a few other things:

      • One or more glow sticks
      • Scissors
      • soap dish
      • Hydrogen peroxide
      • Waterproof gloves
   2. ) Your water should glow like this, but a few extra ingredients can enhance this effect. Measure out a few capfuls of hydrogen peroxide and add it to the mixture, then pour in about half a teaspoon of regular dishwashing liquid (such as Palmolive, Ajax, or other).

   3. Shake and have fun! When you're done preparing, close the container and shake (or just stir) to combine all the ingredients. When you're done, your water will glow with or without black light (although black light can enhance the effect.)

      • Received liquid it is forbidden drink.
   • Glowing water is great for parties. Pour glowing water into glass jars, vases, goblets or any translucent vessel and place them around your house or backyard to wow your guests.
   • Glowing water can be used in the bathroom. Prepare this bath by mixing warm water with tonic or non-toxic fluorescent paint. Turn off the lights and turn on the black lamp for a glowing effect. This is great entertainment for kids. However, when using fluorescent paint, make sure that children do not drink water.
   • You can arrange a battle with glow-in-the-dark water balloons. Fill balloons with glowing water and launch! Try using the glow stick method for this fun. Run in the yard in the evenings with friends and play classic summer games. At the same time, make sure that the glowing water does not get into your mouth or eyes.
   • If it snows in your area, try making glowing patterns. Cool the glowing water to keep the snow from melting and fill the spray bottles. Go outside and paint any pattern on the snow. This is another great idea how to spend an evening with children.

Would you like to replenish your collection of impressions without leaving your own house? For example, learn how to make glowing water, paint or shoelaces? Then experiment with us.

Liquid that sparkles in the dark always looks mesmerizing. It seems that such a miracle can only be found in a scientific laboratory or in the room of an ancient alchemist. However, we know how to make glowing water at home and with pleasure we will tell you about all the nuances of this amazing process.

Before we start making water that glows, you should study the safety rules. After all, the main chemical substance that you have to work with is luminol crystals. It is they who, when interacting with some oxidizing agents, produce a glow, which is necessary. When interacting with reagents precautions should be taken.

1. Children conduct similar experiments in the presence of adults.
2. Need to wear protective equipment: rubber gloves, apron, in some cases a gauze bandage to protect the face and respiratory organs.
3. When working with chemicals, they must not be inhaled, tasted or allowed to interact with the skin.

However, an experiment with obtaining a luminous liquid does not always require huge efforts. We will teach you how to make a luminous liquid from improvised means, that is practically no chemicals.

Making sparkling liquid: the easiest way

This method, in which we will create a luminous liquid without luminol, is quite elementary. What does that require:

• water;
• 3% hydrogen peroxide solution, which is contained in every first aid kit;
• salt, which is present in every home;
• vinegar.

Mix all the ingredients until you get a liquid with a glow.

DIY luminous liquid without luminol

For this method, we also need the most common components.

• 500 ml of sparkling water;
• 1 teaspoon of soda;
• 3 teaspoons peroxide.

Mix everything for 10 minutes.

How to make luminous water with the addition of luminol?

And this method already requires application chemicals. you will succeed liquid that will shine blue tint . To repaint it in a different color, use fluorescent dyes.

So to create magic liquid we will need:

• 2-3 grams of luminol;
• 80 ml peroxide;
• 100 ml of water;
• 3 grams blue vitriol;
• 10 ml of sodium hydroxide solution;
• fluorescent dyes.

Let's start an experiment that will give us an incredible luminous liquid.

Step 1. In a glass container, mix luminol and water.

Step 2. Add hydrogen peroxide to this solution.

Step 4. And at the last stage - caustic soda.

If all these reagents could not be found, let's do luminous liquid based on washing powder.

1. Prepare 20 ml of detergent solution in a tall glass.
2. Add 10 ml peroxide.
3. Pour 5 ml of 3% luminol solution.
4. Grind a few crystals of potassium permanganate and add to the container.

Be careful: the liquid tends to foam and produce sparks.

In addition to these simple ways we have a few in store for you interesting videos about how to make water with a glow.

How to Make Glowing Paint: Bright Magic in the Dark

The next stage of our incredible experiments is the glow-in-the-dark paint. We will make this miracle using a phosphor. This miracle powder that transforms energy into a bright glow can be purchased at a specialty store or online.

To get 1 kg of paint that glows, you need to mix 250 grams of phosphor and 750 grams of varnish.

There are other ways to make magical glowing paint.

To get purple paint you will need:

• calcium carbonate - 10 g;
• magnesium carbonate - 0.6 g;
• sulfur - 3 g;
• sodium sulfate - 0.5 g;
• potassium sulfate - 0.5 g;
• sucrose - 0.5 g;
• bismuth nitrate (0.5%) - 0.5 ml.

Mix the constituent parts and ignite at high temperature- 800 degrees for 45 minutes.

If you find it difficult to get any of the ingredients of this experiment, or you can not remember the name of a particular reagent, we offer you a way so that you can prepare a phosphor and use it to create glowing paint.

1. For this method, you only need to purchase coniferous extract and powder boric acid.
2. Coniferous concentrate is bred in a small amount water. You will end up with a yellowish liquid called tartazine.
3. Now we dilute 1/3 tablespoon of boron powder in some water until a creamy mass is formed.
4. Bring the mass to a boil, stirring and piercing the bubbles.
5. We cool the mass, combine it with tartazine and heat everything.
6. Boil this mixture, stirring, until a bright yellow powder is formed. This is the phosphor.
7. It can be mixed with paint or varnish, or diluted with water.

Such luminous paint, created at home, completely safe for you and your health. It can be used on any surface: applied to plastic, wood, and even to your own body. Such paint can be used in a room on the walls so that they glow in the dark or applied to any object, creating unusual compositions. This is a wonderful idea, both for the house and for the street. Fluorescent paint will give you festive mood and many impressions.

How to make glowing laces: a fantastic look for stylish shoes

The easiest way to get glowing shoelaces at home is dip your regular shoelaces in glowing paint. You learned how to prepare it above. However, such an accessory will cease to glow after two washes. Therefore, we will tell you about another way to make glowing shoelaces with your own hands.

You will need:

• silicone tube (approximately 2m), with a diameter that matches the diameter of the laces;
• 4 LEDs different colors;
• a tube of liquid silicone;
• 4 miniature batteries.

We proceed to the process of making a lace.

If you do not want to waste time on all these manipulations, order yourself glowing ones on aliexpress or on any other service. We wish you bright impressions!

Colored, luminous water inside a jar, on the soles of shoes, on a T-shirt or balloon will always arouse curiosity and interest. A bright yellow or blue glow, securely closed in a glass container, resembles a star that a lover took from the sky for his chosen one. flickering light inside hot air balloon for a child, like magical night moths lost in the sky. Connect the balls into garlands, and your home will turn into a wonderful, magical place, you just have to turn off the light. And if you apply luminescent paint on clothes or shoes, you will stand out from the crowd, like a ghost. If desired, glasses or vases can be filled with a ready-made color composition, placed around the living room in unexpected places - as soon as the night falls, everything around flickers with rainbow lights, causing everyone's admiration.

What methods of preparation of the luminous liquid exist

Phosphor is a chemical substance that requires accuracy and increased attention. It is highly undesirable to conduct a rather dangerous experiment for children without the help of adults. A little trick: if you don’t want to waste time on making, just buy any luminous marker, disassemble the rod into fibers and lower it into water. Colored water will glow at dusk. The phosphor can be ordered online, but the beauty created is much more appreciated.

Paint or clothes can be made from boric acid and pine concentrate. The drugs are cheap, you can buy them at any pharmacy.

Would need:

• Water - 50 ml;


• Coniferous concentrate - 3 g;


• Boric acid - 1 pinch;

Dissolve coniferous concentrate in water. Pour a pinch of boric acid into an aluminum container, add needles to it drop by drop. Place the saucepan on the stove and bring the mixture to a boil while stirring constantly. As soon as the solution gurgles, remove the pan from the stove, let cool. Then add water again, a pinch of boron, a dose of coniferous concentrate. Put on fire. The finished liquid should have a yellowish tint. Pleasantly surprise your soulmate: write a love confession on a piece of paper and attach it to the wall. It remains only to wait for darkness.

Magic shimmer with hydrogen peroxide

Protect your face from burns - hydrogen peroxide has a characteristic odor that pierces the nose and throat in a second, and also makes the eyes watery.

Would need:

• Water - 300 ml;


• Hydrogen peroxide - 2 tbsp. spoons;


• Table salt - 2 tsp;


• Vinegar - 0.5 tsp

Mix all the ingredients, screw on the lid and shake the flask well. To get a soft blue glow, you need to mix in glass jar luminol - 15 g, "Dimexide" - 30 ml and dry alkali - 35 g. Shake the jar thoroughly until a blue glow forms. If the glow is cloudy and unsaturated, slightly open the lid. Air, once inside, will make the solution brighter.

Laces that glow in the dark

Be sure - appearing in shining sneakers on the dance floor, you will be surrounded by the attention of others until the end of the evening. The most important detail - laces, should be wide and of high quality. Pour 300 ml of water into a glass and mix it with 2 tbsp. spoons baking soda. After the soda has dissolved, add 2 tsp to the liquid. hydrogen peroxide, shake the jar. Dip the shoelaces into the solution and wait 10-15 minutes.

The container can be either glass or plastic.

We are all tired of the monotonous everyday life so much that sometimes you really want to make life brighter and more interesting. Take a break from the usual and do something fun and unusual at home (like glowing water). If you are interested, then stay with us!

Believe me, create water that glows brightly different colors in the dark is a very fun activity for all ages. You will enjoy your free time and appreciate the result of your work. After all, glowing water can be a great addition to your Halloween or birthday celebration.

It's also not a bad idea for active occupation children, a romantic dinner or New Year's Eve! Or you can use it as a decoration by pouring some glowing water into a vase of flowers.

Precautionary measures!!! Some recipes may contain chemicals, so don't use them in front of children as it can be very dangerous for their health. Be sure to purchase rubber gloves and safety goggles, and wear clothing that is not easily flammable.

Be sure to follow all the proportions according to the recipe during cooking, otherwise you will not succeed.

Getting Started

You can find a lot of recipes for making luminous water on the Internet, but all of them can be divided into three ways:

• without chemicals and luminol;
• with luminol;
• without luminol.

Without chemicals and luminol

There is one fastest, most popular and fairly simple way to make glowing water without any chemicals and even without hydrogen peroxide. It is very safe, because for it you only need fluorescent dyes and an LED.

Recipe #1

Take:

• yellow markers (if desired, you can take a few multi-colored ones). It is from them that we will extract a non-toxic fluorescent dye;
• a bowl of water;
• LED (flashlight or night light with a blue LED light source) that will showcase the beauty of the glowing water.

Pour plain water into a bowl. Then cut the marker and pull out the ink-soaked felt that is inside. Extract the paint from the felt into the water, and also cut it and soak it in the water. The bowl should have a yellow liquid.

Pour it into a glass, turn off the light and direct the LED beam at our mixture. You will not believe it, but it will glow with bright paint!!!

With luminol

First, let's look at recipes based on the chemical luminol, which will give you a smooth and slightly bluish light. Luminol is a yellowish powder that is reacted with an oxidizing agent to produce a glowing effect. As an oxidizing agent, we can use hydrogen peroxide or dimexide (both drugs can be found in any pharmacy).

Luminol itself is quite expensive, but the effect is amazing and lasts quite a long time. All of the chemicals for this recipe can be found at chemical supply stores or online.

Recipe #2

Take:

• hydrogen peroxide (80 ml);
• luminol (2 grams);
• copper sulfate (3 grams);
• sodium hydroxide solution (10 ml);
• water (one cup);
• fluorescent color;
• plastic bottle.

Gently mix all ingredients except luminol in a bottle and shake well. Then add luminol to the resulting compound and watch with pleasure how the liquid begins to shine during the reaction.

Recipe #3

You can also do it using only the usual household chemicals that can be found in every home.

Take:

• plain water (half a cup);
• hydrogen peroxide 3% (10 ml);
• washing powder (2 scoops);
• manganese crystals (at the end of a knife);
• solution of luminol 3% (5 ml).

AT tap water dissolve the laundry detergent, then add hydrogen peroxide and luminol.Pour the resulting liquid into plastic bottle close the lid and shake thoroughly.

All those who have ever watched science fiction films have seen various luminous liquids in them. Surely you have wondered how to make a luminous liquid from improvised means and whether it is even realistic. It is possible that you will succeed!

chemical glow

Not only chemists can skillfully create various luminous substances. In fact, they borrowed this idea from nature. Animals and plants that have bioluminescence can glow in the dark. Why do they need it? For example, fireflies attract females with their glow. Some species of deep-sea fish attract prey in this way. Other animals use the glow to scare or camouflage. Such a glow is a complex physicochemical reaction, as a result of which chemical energy is converted into light energy.

People have learned to use bioluminescence for their own purposes. For example, during the war, the Japanese used dried crustaceans with a glow to read maps. The power of such light was enough to read maps and reports and at the same time remain invisible to the enemy. Bioluminescence is widely used in medicine and analytical chemistry - with the help of luminous bacteria, the content of certain substances in cells is checked.

Or you can use the glow for entertainment purposes - create an atmospheric party or paint the walls with luminous paint. We suggest you study several recipes for creating luminous liquids at home.

Safety

Do not forget about such an important aspect as safety when working with chemicals. Although the recipes offered to you in this article will not contain caustic and poisonous substances, it is still worth observing some protective measures:

• The dishes in which you will mix the substances should be such that it would not be a pity to dispose of it later.
• Protect your body by wearing gloves, goggles, and a gown or other non-synthetic clothing.
• The workplace must be well ventilated.
• Do not allow children to work.

simple recipe

In general, all recipes for the preparation of luminous liquids are divided into two types: recipes using luminol and recipes without luminol. Since this substance can only be obtained in specialized stores that sell chemical reagents, we will not consider recipes using it.

Try making a glowing liquid out of water, peroxide, salt, and vinegar. To implement this experience, you will need:

• Plain water 500 ml;
• Food salt 2 tablespoons;
• Table vinegar 4 tablespoons;
• Hydrogen peroxide 3% 4 teaspoons.

In almost any home you can find all these ingredients, and if something is missing, just buy it at a pharmacy or store. All you need to do is mix these ingredients in a jar with a tight-fitting lid.

You need to shake very carefully, for 10-15 minutes, so be patient.

With borax and tonic

To prepare a glowing liquid using borax, you will need:

• Water 140 ml;
• Three caps of 3% hydrogen peroxide;
• 1/2 teaspoon borax (sodium tetraborate)
• One teaspoon of baking soda.

Borax and peroxide can be bought at the pharmacy. The secret of this recipe lies in the exact proportions and alternate mixing of the components. Let's get started!

Borax powder must be dissolved in water. Then add soda to it. This will start chemical reaction with emphasis carbon dioxide- the solution will begin to hiss and foam. It remains to add hydrogen peroxide, mix the ingredients thoroughly and turn off the light. Glowing liquid is ready!

Ordinary tonic, which contains quinine, can glow. To do this, just pour it into a glass and highlight it with an ultraviolet lamp. The liquid has a pleasant uniform blue tint.

Only it is necessary to highlight from above - the glass does not transmit UV rays.

Markers and sticks

In free sale you can find glow sticks and fluorescent markers. What will you not do for the sake of obtaining the coveted luminous liquid! Let's make it from a marker. To do this, you need to take a fluorescent marker, it glows in ultraviolet light. This glow gives the substance a phosphor. Widely used for industrial and recreational purposes. With such a marker, you can write secret messages that are not visible without a special lamp. It can also be used for welding. You need to extract this substance from the marker. To do this, you need to make a little effort and skill and remove the ink-soaked rod from the marker.

Remove the cotton-like material from the rod and place it in a glass of plain water.

Naturally, the more water you take, the weaker the glow will be, so either increase the number of consumable markers, or take less water.

Leave the liquid for about an hour so that the dye completely goes into the water. Wring out the cotton wool thoroughly - no need to miss a drop of magic ink!

Now turn off the light and illuminate the glass from above with an ultraviolet lamp. Incredibly beautiful luminous liquid is ready! Markers are available in different colors, which means you can experiment with colors perfectly.

It's easier than dissolving a glow stick in water and you can't think of anything. Remember only the law of dissolution - the lower the concentration of the original substance (phosphor), the weaker the glow will be. To prepare such a solution, simply cut a few glow sticks and pour their contents into a glass of water. To enhance the glow, add a little hydrogen peroxide.