Board on which you can write with chalk. How to make a chalkboard for writing? Very simple! Ingredients and Tools

Almost all young children are very fond of drawing, often using the floor, walls and pieces of furniture as a “canvas”. Taking into account the needs of their child, resourceful parents make certain adjustments to the home interior, using a special paint, which is easy to apply and just as easy to remove chalk. In this case, it is not at all necessary to paint an entire wall or cabinet. A small chalk board is quite capable of satisfying the creativity of a child, which can also be useful for adult family members if you use it, for example, for notes and reminders of important matters.

The paint, which has the effect of a slate board, is very often used to restore furniture, making the coating matte, velvety and pleasant to the touch. Its creator is British designer Annie Stone. In 1990, she developed a special finishing material, which she began to sell under the brand name "ChalkPaint".

Making a chalkboard opens up a wide range of creative possibilities

Note! Given the name and consistency of "ChalkPaint", it is logical to assume that one of its components should be chalk (calcium carbonate). However, the problem is that for more than 20 years, the original recipe has not been revealed by its creator. Therefore, many clones have appeared on the market, created on the basis of a variety of materials.

In addition to an interesting visual effect, chalk paint has a number of operational advantages:

• fits well on almost any material (wood, wood substitutes, metal, drywall, plaster, brick, tile and glass);
• has excellent adhesion to the surface;
• has good hiding power, hiding most of the defects of the old coating;
• dries quickly;
• does not have a strong odor;
• non toxic.

The disadvantages of such a finish include its price and scarcity. "ChalkPaint" is not supplied to Russia at all, and its counterparts from the companies "Tikkurila" and "Siberia" are an order of magnitude more expensive than conventional paints and varnishes. Therefore, in order to save money, many people try to make a slate coating on their own, using more accessible and inexpensive components for this.

Factory slate paint is available in several colors

5 homemade chalk paint recipes

To make chalk paint with your own hands, you can use several recipes. The essence of each method is to add a fine loose substance to the usual glossy paint, which gives the coating the necessary roughness.

Acrylic or latex wall paint is suitable as the main component. The second is also made on an acrylic basis, however, due to the addition of rubber to the composition, it has increased strength characteristics. Therefore, if we are talking about the manufacture of a chalkboard, the coating of which will be constantly subjected to certain loads, it is better to stop at the latex version.

As an auxiliary component, you can choose sodium bicarbonate (regular baking soda), calcium carbonate, gypsum, tile grout and even cornstarch. All options have the right to life, and their success primarily depends on the right consistency.

Application of baking soda

Application of baking soda

Required proportion:

• 2/3 paint;
• 1/3 soda.

The preparation of such a composition is one of the most affordable options, since soda can be bought at any grocery store. The very process of creating paint is quite simple: you need to mix the two components until a homogeneous mass is obtained. If the mixture is very thick, adding a little water will help bring it to the desired consistency.

Advice! To avoid lumps, soda or any other bulk material should be added gradually.

When using such a composition, the complete coverage of the treated surface occurs when applying 3 layers of paint. After drying, the finish has a rather massive grainy texture. If it is necessary to get rid of such an effect, for example, for a chalkboard, too much grit is superfluous, it is enough to perform a fine grinding of the surface.

Application of corn starch

Required proportion:

• 2/3 paint;
• 1/3 starch.

Just like soda, cornstarch is sold in almost any supermarket and has a very affordable price. The technology for obtaining the desired mixture does not differ from the previous version, the only point is that you may need a little more water to get the mass that is optimal for applying to the surface.

For complete painting of the surface, 2 layers of coating are sufficient. At the same time, the need for fine sanding is also present, since after drying strokes will be clearly visible, which can adversely affect the texture of the finish.

Application of calcium carbonate

Application of calcium carbonate

Required proportion:

• 2/3 paint;
• 1/3 calcium carbonate.

The price of 1 kg of fine calcium carbonate powder exceeds 200 rubles, so this chalk paint recipe is not the cheapest. But from the point of view of the result, the addition of chalk allows you to get, perhaps, the best composition, which, after drying, has a uniform texture and does not require sanding. Full coverage of the part occurs after applying 2 layers of paint. With such a finish, you can safely open not only a chalkboard, but also furniture.

The use of gypsum

Building plaster

Required proportion:

• 3/4 paint;
• 1/4 plaster.

The use of building gypsum (alabaster) is one of the best options, taking into account the price / quality ratio. This material is an order of magnitude cheaper than chalk powder, while the coating after 2-layer processing has a uniform matte texture and, subject to the correct consistency of the paint composition, does not require additional grinding.

Note! Gypsum dries very quickly, so after making the mixture, it should be immediately applied to the surface.

The use of tile grout

Tile grout

Required proportion:

• 3/4 paint;
• 1/4 grout.

Tile grout is in the middle price range between calcium carbonate and stucco. The quality of the chalk paint obtained with this material is high enough, so it can be used to safely finish furniture. As a rule, it is enough to apply 2 coats of such a composition that the coating is uniform and does not have visible defects. In this case, fine grinding is not required, and after the surface has dried, you can immediately draw on it or make inscriptions with chalk.

Master class on making a board for drawing with chalk

Making a chalkboard with your own hands with the necessary components is very simple, especially if the master has detailed instructions with intelligible illustrations at his disposal.

Tools and materials

For work you will need the following materials:

• glossy acrylic latex paint;
• finely dispersed bulk component (one of those mentioned in the previous section);
• container and stick for making the mixture;
• medium hard brush or roller;
• paper tape, if you need to protect the edges;
• base for painting.

If the work will be carried out in a residential area, it is desirable to protect the working space from accidental ingress of paintwork material. To do this, you can use oilcloth or old fabric.

Note! The color of the paint for the chalkboard is selected individually. The choice does not have to be limited to the black option. Chalk will be clearly visible on brown, burgundy, blue, green and any other dark surface.

To make a slate board, a standard paint tool kit is used.

Main stages of work

1. Any material can be used as a base for the board: plywood, chipboard, fiberboard, MDF, natural wood or drywall. It is desirable that the base be smooth, without visible defects. Otherwise, it is necessary to sand the surface with sandpaper. The same procedure (grinding) should be performed if the workpiece has a glossy finish. In order for the paint to have good adhesion to the surface, the gloss must be removed.

For this master class, an ordinary cutting board was chosen as the basis, which is available to any hostess

1. Chalkboard paint can be prepared using any of the methods listed above. Most often, a combination of latex paint with gypsum or tile grout is used for such purposes.

If the surface to be treated has a small area, you can prepare the finish in any improvised container

1. The resulting mixture should be applied immediately after preparation, as it dries quickly. In order for the coating to turn out uniform, brush strokes should be fairly smooth.

2-layer processing is usually enough to completely paint over the workpiece.

1. Drying time for chalk paint is in the range of 30 to 60 minutes. If everything has been done correctly, the surface will soon become matte and velvety.

If there are visible irregularities, light sanding with fine-grained sandpaper should be carried out.

1. After drying, the slate board can be tested for functionality by making a small note or sketching a fun drawing.

The colors of the chalk and the board should be contrasting so that the inscription is well read.

How to care for a slate board

Despite the excellent performance of chalkboards, they can be easily scratched by hard objects. Therefore, you should not draw with cheap chalk, since it often contains impurities of sand and small pebbles. For home use, it is better to buy special crayons for drawing, which tend to respect the surface.

Note! The composition of crayons for drawing, in addition to calcium carbonate, includes a coloring pigment and a binder designed to reduce dust formation during operation.

Do not use abrasive material or aggressive cleaners to wipe the inscriptions from the board. To erase the chalk, just apply a damp soft cloth or sponge.

The use of a soft material to clean the board from chalk will significantly extend its service life.

A do-it-yourself chalk board for drawing or writing will allow you to solve several problems at once. Such an accessory will decorate almost any interior, and all important things will be recorded, which means they will be completed. But most importantly, the results of children's creativity will move from the walls, floors and furniture to the surface intended for this.

The convenience and functionality of flipcharts, as well as boards for drawing with chalk and marker, is beyond doubt. All these attributes have gained wide popularity among the audience, young and old. They are successfully used in educational institutions, offices and shops.

This sudden craze for chalkboards has caused their prices to skyrocket. In other words, the cost of the finished product is very modest, but its cost in retail chains leaves much to be desired.

You will surely be pleased to know that you can make such a mono board with your own hands at home. For this, there are special paints that, after drying, create a surface suitable for drawing with chalk or markers.

This coating is resistant to abrasion, it does not scratch and makes it easy to remove chalk residues from the surface with a dry or damp sponge. True, it is not easy to find such paint in our time. The easiest way to do this is to use the services of an online store.

The author of this master class set out to ennoble the former doorway, which he had previously sewn up with boards. There were many options for how to turn around for the master with his imagination, however, the opening was located in the nursery, so the solution should have been acceptable for this. This solution turned out to be a homemade chalk board, made from floor to ceiling.

In order to make the same drawing board with your own hands, you will need:

Materials:

A sheet of thin plywood according to the size of the future drawing board;
- a board for the manufacture of decorative cashing details;
- wooden plinth for the manufacture of a three-dimensional frame;
- the remains of plywood for the frame;
- paint to create a surface for drawing with chalk (markers);
- paint for painting the frame;
- varnish for woodworking;
- glue for wood;
- nails, screws;
- masking tape;
- board for the manufacture of shelves;
- attributes for drawing: multi-colored crayons (markers), a container for chalk, a sponge for erasing chalk or a marker.

Instruments:

Miter saw, circular saw or wood saw;
- grinder;
- screwdriver;
- pneumatic nail gun or carpenter's hammer;
- paint brushes and a roller with a tray for paint;
- construction tape measure and square;
- pencil.

Step One: Preparing the Foundation

As a base for a drawing board, the author used a doorway, which he had previously sewn up with planed boards. Remember that the base must be as flat as possible so that the plywood does not bend during the process of marking.

You can also use two layers of plywood with sound deadening material in between. Plywood is cheaper than natural wood, so this will greatly reduce the cost of making a drawing board.

Cut a sheet of plywood to size and secure it to the base around the perimeter. Use small wood screws for this. Connections should be located in those places that will later be closed by a wooden frame.

Ideally, the plane of the plywood sheet should be even and smooth. However, if its quality does not suit you, sand the plywood base with a grinder. Use a nozzle with fine-grained sandpaper.

Start painting the base. To do this, you have already chosen the right paint in black or dark gray. Follow the instructions and apply the composition to the plywood in two or three layers using a roller. So, the paint will be distributed more evenly. Wait until the coating is completely dry and hardened. The paint should not stick to your hands.

In order to arrange a beautiful and neat decorative frame, the author used a wooden board and plinth and natural wood. However, it was assumed that the frame would be voluminous, and the thickness of the board would clearly not be enough for this.

In order to compensate for the thickness, he used linings from the remains of plywood. That was enough, and the baseboard lay exactly flush with the board.

Along the entire perimeter of the future frame, he glued pieces of plywood, after which he fixed the cashing made from the board on them. The author sewed up the end of the frame with a wooden plinth matched in width. He made all the measurements and notes right in the process of work.

To make the joints invisible, use small nails instead of screws. These parts do not carry any tangible load, and carnations will be enough.

Before painting the wood frame, cover the edge of the drawing board with masking tape to avoid staining it. Apply the paint carefully, without splashing it, otherwise the work will be ruined. Use an appropriately sized paint brush for this.

The author chose a durable dark blue paint. Choose hardwearing oil or nitro paints if you don't plan on varnishing the frame surface. Most of them are self-sufficient and do not require surface protection.

If you chose a water-based paint, also get a varnish in a pair with it. Opt for resistant varnishes based on alcohol or solvent. Apply the varnish in two or three layers, allowing each of them to dry according to the instructions. Remove masking tape.

This will be used for the remains of the boards purchased for the frame. You don't need a lot of material. Decide on the size of the shelves and cut the pieces into pieces of the length you need. Finish the edges with a grinder. If the boards are not pre-sanded, sand the surface of the parts as well. This is necessary so that the composition for painting lies evenly, and the paint itself is used sparingly.

Assemble the shelves with small nails and self-tapping screws and paint the surface with any suitable means: paint, toner, stain or varnish. Some of them can and should be combined. For example, stain and varnish or toner and varnish.

Recently I came across a very interesting solution, how to organize a place for children to draw with chalk on the street, without asphalt. This solution is especially suitable for summer cottages. It looks aesthetically pleasing, judging by the photos and reviews, the children are delighted. In general, we are talking about a slate panel in the yard, most often right on the fence, on which children draw with chalk. Something like this beauty: Do you think people buy blackboards? But no! This is all slate (or graphite) paint, which can be used to paint even a fence, even a chipboard sheet ...

Draw with chalk and make magnets. Right on the wall!

On the video - a master class on the use of Tikkurila slate paint. Previously, it was only available in black, but now it is available in color! The new blackboard paint Liitu Tikkurila is tinted in more than 20,000 shades. You can paint furniture and walls in rich colors, and draw on them with crayons of any color! -In addition, with the help of another paint - MAGNETIC (Tikkurila) - you can make a MAGNETIC surface. Both colors are compatible! Read more: Design a creative area in the nursery by painting the facades with Liita's paint

Do-it-yourself chalk board is our long-awaited master class. Without unnecessary sentimentality - such a board is an ideal decor in any interior. You can leave funny drawings, write a to-do list and come up with funny wishes. Every day! And the best part is that you can make such a board yourself, armed with patience and a creative impulse.

INGREDIENTS

• A board of the size and shape you need: chipboard, solid wood or thick cardboard. Or a wall;
• Primer (great choice of primers);
• Roller with short pile;
• Slate paint (in a jar or spray bottle) or black paint and tile grout powder.

FOR THE WORK

• 01 Depending on whether you will be painting a sample or a wall, first of all, prepare the surface - clean it from dirt, dust and prime. Leave for a day.

• 02 Apply two coats of slate paint gently with a roller. Let dry.

• 03 The resulting chalk board can be framed and hung on the wall.

Attention! You can replace slate paint by mixing any black paint with a few tablespoons of grout. But still it is better to use a special paint - it dries well, is odorless and safe for children.
Editorial note

• It is ideal to apply the paint in a thin layer 2 times.
• It is best to go outside to apply paint to the sample: the temperature should be above 10 ° C and the humidity should not be lower than 85%. When painting the wall - ventilate the room well.
• Use a short nap roller to apply the paint to avoid unevenness.
• Do not rush to use the board - it should dry well.

WHERE TO BUY SLATE PAINT IN MINSK?

You can find paint in construction hypermarkets, as well as in the open spaces of the network. For example, in the company Tikkurila it is presented as blackboard paint, in the Fanpaint store look for slate effect paint(it is possible to buy a jar of 0.5 liters or 1 liter). Good suggestion for chalkboard paint available in the Podarkino store.

Source: my-craft-inspiration.blogspot.com.by, livejournal.com

The chalk board is increasingly finding its use outside the walls of educational institutions. The strict rules for the design of a classic school board have blurred, in their place have come interesting forms and a decorative appearance. The chalkboard has become a part of the interior, allowing not only to decorate the room, but also to bring a useful component to it. Picking up on newfangled trends, designers began to widely use slate surfaces in their projects, photographers included chalk boards in the list of necessary props for photo shoots, calligraphers began to paint slate photo zones at weddings and presentations. Such a creative boom was due to a new look at the good old chalk board.

So I, imbued with this idea, decided to make a chalk board with my own hands. Only I could not find a special paint with the effect of a slate board. As often happens, if you light up some idea, you need to start implementing it on the same day. Patience is not enough, hands itch to get to work. I started looking for an alternative, as it turned out, there is a simple and budget option, which I will talk about in today's master class.

In order to make a slate board with our own hands, we need:

• Acrylic paint for wood;
• Matte black (or other to your taste) acrylic paint for the working surface of the board;
• White Spirit;
• Fugue for tiles (grout for filling tile joints);
• Drill;
• Electric jigsaw or hacksaw;
• Construction primer;
• Brush and foam roller for decorative paint;
• Sandpaper;
• Screw-ring, screws;
• Baguette frame;
• Twine (rope or lace).

Tip: To decorate a chalkboard, you need to find a base with a large flat surface on which we will apply paint. The basis can be a wall in a room, a kitchen cabinet door, a baguette frame with a back wall (back), a sheet of plywood or fiberboard.

An old baguette frame was found in the attic. According to the dimensions of the frame, the back wall is cut out of fiberboard (48x38 cm, thickness 0.5 cm). Since the baguette frame lost its pompous appearance from time to time, and the stucco molding partially fell off, it was decided to remove it and clean the frame of paint.

Gypsum stucco is well removed with a spatula, and old paintwork with sandpaper. We clean the plaster and paint, apply a primer to the cleaned surface. After the primer has dried, cover the frame with two layers of paint with an interval of 24 hours. It remains to decorate the frame itself. We take paint and a brush. With light strokes, without painting over completely, we apply paint to the surface of the frame.

After about forty minutes, we moisten the cotton wool with white spirit and erase with it those places that came out unsuccessfully when stained. You can also walk along the surface to be painted so that the unpainted areas acquire the shade of the decorated paint.

Leave the decorated frame to dry completely. Now it's time to work on the back wall, which will be the basis for the slate board. For reliable adhesion of the paint and the fiberboard sheet, we clean its smooth surface with sandpaper. Then we cover with a primer, after about an hour, we apply a base coat of matte acrylic paint.

We apply homemade slate paint on top of the base layer. In order to make a paint with a slate effect, we need the acrylic matte paint itself and a fugue (tile grout). We take 3 parts of paint and one part of the fugue (3: 1) and mix with each other until smooth.

Tip: In order to minimize the formation of lumps, add the fugue gradually while stirring the paint at the same time. Paint color can be chosen to your taste. If the paint is not light, then the chalk on it will also be clearly visible.

After the mixture of paint and fugue is ready, we roll it out with a foam roller on the surface of the future board. Roll out the paint evenly and in one direction with a roller. The roller needs to be pressed a little when rolling on the fiberboard in order to roll out small lumps and press the fugue particles into the paint. If you want the chalkboard to last for a long time, then cover the base of the board with at least 3 layers.

After the paint on the frame and on the base of the slate board has dried, we combine the frame and the back wall together and fix them together with clamps. On the reverse side, we mark the markings with a pencil, along which we will fasten the frame to the back wall with screws. We take a drill with a drill of a smaller diameter of the screw thread, drill holes and wrap the screws in them.

Tip: By screwing the frame to the fiberboard, we will get a gap between the frame and the fiberboard sheet. Chalk dust will fall into the gap (where glass is usually inserted), which will prevent everything around from being stained with chalk.

Having decided in what position the board will hang (horizontally or vertically), we drill holes for fastening the screw-ring. A ring screw is a screw that has a ring instead of a head. Through this ring, you can thread a rope and hang the board on the wall. According to the thickness of the frame and fiberboard, we measure the length of the screw-ring so that when twisting it does not crawl out onto the front side of the baguette frame.

We clamp the ring screw in a vise along the measured length and bend it. Then we wrap the screw with the ring into the holes until the fold. We insert the rope into the rings and tie it - the chalk board is ready! With proper decoration of the baguette frame, the made coated board can fit into any interior.

Tip: To extend the life of your chalkboard, use soft crayons or a chalk marker.

In the way considered in today's article, if necessary, you can paint any objects and surfaces. With the help of colored crayons, you can create unique props for photo zones, wedding photo shoots and signs for messages to your loved one. If you cover a metal surface with homemade slate paint, then magnets can be attached to the chalkboard. Such a slate-magnetic board will be a great alternative to the refrigerator door. Housewives will appreciate the slate surface in their kitchen.

The chalkboard is great for a kid's room. On it, you can learn the alphabet, train to draw letters with chalk, draw and develop creative abilities in a child.

Such a useful recording tool will become an indispensable assistant in the workshop. It doesn’t matter whether it is sewing or locksmith, there is always a need to make a drawing that will always be in sight when doing work. The most important thing is that at any time you can make changes, erase everything and draw again.

The chalk board fits well into our interior and has become a good helper for organizing time and affairs. In addition, the home organizer from time to time becomes a message board.

The other day I got a large baguette frame from the attic, which I also plan to remake and hang in the room. What will come of this, you will find out in the next article. Subscribe to site updates, join groups on social networks, and you will be aware of new publications!

About the author:

Greetings, dear readers! My name is Max. I am convinced that almost everything can be done at home with your own hands, I am sure that everyone can do it! In my free time, I like to craft and create something new for myself and my loved ones. You will learn about this and much more in my articles!