Assassin's Creed is a game that has captivated millions. In it, the main character Desmond will have to move into his past and begin the fight against the Templar Order. The first part of the game, which takes place during crusades, hit the computers of action-adventure fans like a hurricane. Such high-quality games are very rarely released for the PC platform. In the second part we are transported to Italy during the Renaissance. The continuation of the franchise was so successful that it received two additions - Brotherhood and Revelations.
In 2013, the third series appeared on store shelves, in which the action takes place during the colonization of America.
The successful franchise has had an incredible impact on gamers. The network began to be full of fan fiction and cosplays. The idea of becoming a brave assassin simply captured young people. The unusual retractable blade attracts special attention.
After completing training and passing exams, elite assassins were accepted into the order. Upon initiation, the assassin received a retractable blade and lost his middle finger. It was easy to carry out unnoticed murders with such weapons. And thanks to him quick response he could easily help decide the outcome of the battle.
If you want to feel like a cold-blooded killer, the best hunter of the order, then look at how to make an assassin’s blade with your own hands, for example, from paper. This can be done at home using available materials.
So, to make an assassin blade with your own hands, we will need the following:
1. Roll the paper into a tube and secure with tape. Don't make it too narrow.
2. We crush or flatten it on both sides so that we get a parallelepiped.
3. Place the workpiece on your hand and measure required quantity. The length should be approximately half the distance from the hand to the elbow. Cut off the necessary part and set aside the rest.
4. Now we proceed to the main part of the consideration of how to make an assassin’s blade with your own hands. We strengthen our box with tape. In the middle of the sides we make cuts, which we also fasten.
5. Take more paper and roll it into a tube of smaller diameter. We fix it as in point 1.
6. We flatten it in the same way as a large workpiece, then divide it into several small parts, more precisely, into two.
7. We glue one of the blanks on one side and cut it out on the other in the shape of a concave arc. Stuff some paper inside.
8. We insert the second blank, the end of which is cut to the shape of a dagger, into the first one. Glue it together.
9. Let's move on to the next part of the description of how to make an assassin's blade with your own hands. We take a toothpick and use glue to fix it at the base of our paper knife.
10. Connect our hidden blade to the box. Insert the ends of the toothpick into the slots. We eliminate the shortcomings by gluing the paper inside the box on both sides of the blade (top and bottom).
11. We make a small hole in the upper part of the “blade” into which we thread a thread, then fasten it. At one end we make a loop, it will be fixed on the finger.
12. Take the lace and cut it into two parts, and then glue them onto our box. Thus, the mechanism will be secured to the hand. This concludes the description of how to make an assassin blade with your own hands.
So, now you have at your disposal a completely non-dangerous model of a deadly weapon. Some people make it from real knives, but such a dagger is quite suitable for the game. We looked at how to make an assassin's blade; the diagram can be drawn up by you yourself with some changes.
How to make an assassin blade?
The retractable assassin blade is a weapon from the popular game Assassin's Creed, which has many fans all over the world. The hero of the game, the assassin, according to the history of the game, upon initiation received a hidden retractable blade for unnoticed murders, losing his middle finger for this.
Now fans of the game participating in role playing games and cosplays, they make similar blades on their own. This does not require any special skills of a professional gunsmith; it is enough just to have a little experience in performing this type of work. How to make an assassin's blade in various ways, and will be discussed further.
There are several ways in which you can craft the Assassin's Hidden Blade. Let's stick to something simpler: mechanically blade manufacturing. Main characteristics This weapon has a retractable blade. In addition, it is necessary to carefully consider how the blade will be attached to the hand so as not to cause injury to the owner, as well as how the blade will be fixed in the extended position so that it does not move back upon impact.
A correctly made Assassin blade should be easily thrown out of the structure with a wave of the hand and hidden back in the same way.
If working with metal seems too labor-intensive or if you want to make a safer blade, you can make it from paper.
Of course, you can make an assassin’s blade out of paper not only in this way. There are other options that, once you understand the essence of the design, you can change and supplement yourself.
This option for creating a blade differs from others in that with this design the blade does not pop out, but extends like a latch. This design is not as impressive as the first one, but it is quite simple to make. To produce such a blade you will need a sharp stationery knife, fishing line and a thin elastic band. The blade can be made by following the following sequence of actions:
A similar blade from the game "Assassin's Creed", made of PVC, can be bought in an online store. However, knowing how to make a hidden assassin blade with your own hands, you can make a truly unique weapon that will bring a lot of joy to its owner.
You will need
Instructions
Use tin snips to cut off the slide at the end of the ball guides. You can take ball guides, which consist of only two parts, but it is much more convenient to use ball guides with three carriages.
Use a grinder to cut the blade off a kitchen knife. You need to cut with a margin, since part of the blade will be used for fastening.
Insert the blade into the last, smallest of the guide carriages. Securely fix the blade with glue. Then, for reliability, secure the blade with screws. Under no circumstances should it fly out and injure you or others.
For another way to create a hidden blade, you will need two folding knives. Unscrew all the screws from their housing and set them aside; you will need them later. Peel off the surface of the case to reveal the internal parts folding knife. Remove trigger, spring, mechanism, blade rivet and blade from the body. Using pliers, pull out the flaps, small springs, from the narrow holes inside the housing.
Disconnect the end of the housing of one of the , holding it horizontally. Using a marker, draw a line that will vertically divide the body in half. Saw off the end along the line marked with a marker using a hacksaw. Place the file in the blade housing and file away any metal shards. Weld both folding knife bodies together to create one long hidden blade body. Position both uncut housings lengthwise so that the blade inserts into the end of the cut housing and reaches the end of the uncut housing.
Reshape the surface of the second folding knife body so that it matches the other folding knife body. Cut off the end of the surface of the first housing where you cut the corresponding housing. Holds the surface close to the body to mark the cutting line with a marker before cutting. Cut out the metal stopper at the end of the blade cavity using grinder.
You can start creating your own blade. Pinch the end of the jackknife blade to the end of another piece of aluminum flat block. The blade and the aluminum flat block must be the same size. Select a drill bit that is the same size as the rivet hole in the knife blade. Make a corresponding hole in the aluminum block.
Fix the working edge of the blade and the block, give the block the shape of a blade.
Modify one of the knife mechanisms by cutting off the lip so that the entire corresponding edge is smooth. Install the uncut mechanism in the modified housing, then place the cut mechanism at the other end of the housing and mark a spot on the end of the cut mechanism. Cut the end of the cut mechanism section that overlaps the uncut mechanism so that the pieces fit together and fit flush into the body.
Replace the internal body parts using pliers, putting the flaps and small springs back in. Then insert the actual hidden blade into the housing and snap the mechanism into place. Return the long spring and attach its hook to the base of the housing end. Install the switch and pull the end of the spring, holding only the hook, to the other end of the housing.
The Hidden Blade in Assasin's Creed is a mandatory and primary weapon used for stealth assassinations. It is a retractable blade that matches the bracelet. The blade extends unnoticed, making it a particularly valuable weapon. The hidden blade has evolved over time and its variants include a miniature pistol, a poison blade that can be used to poison an enemy, and a double-bladed blade that can hit two targets at once. The poison thrower, invented in the game by Leonardo da Vinci, is also a variant of the hidden blade. This is a remote poison blade that can be used to poison a target located far away. The hook blade is a special upgrade for a blade that can be used to move
"Assassin's Creed", or, in Russian, "Assassin's Creed" is a series of action-packed video games, the main character of which is the hereditary assassin Desmond Miles. The game developers “gave” the main character a wide arsenal of weapons, including a devastating retractable blade. Do you also want to feel like a participant in a hectic virtual reality? It's easy. Today we will tell you...
To make this craft you will need 8 sheets office paper, colorless tape and a little patience.
Step 1."Blade" of the blade.
Take four sheets of paper and place them one on top of the other. Fold them in half twice in succession. Using a utility knife, cut a 1 cm wide strip on one side along the ruler. Sharpen the end by cutting off the corners from one end. To prevent your blade from falling apart, cover it with tape all around.
Step 2. Case.
Just like when making a blade, fold the four sheets in half twice. Then cut out the central part and secure the remaining parts with tape.
Step 3. Attach a protrusion-limiter to the back of the “blade” using tape, which will not allow the blade to fall out when moving. Insert the blade into the case.
Step 4. Place a sheet of paper on the case so that the latter moves downwards from the limiter by a couple of millimeters.
Step 5. Wrap the sheet around the case and place it on top so as to leave a gap of about 5 millimeters. Secure the sheet at the ends with tape. Now, with a sharp swing to the left, the blade should jump out of the case.
So from now on you know how to make an assassin blade out of paper with your own hands. When acting out a scene from your favorite game, you can hide your weapon in a wide sleeve and effectively pull it out at the most unexpected moment.
To satisfy a child's interest in the warriors of the night and their activities, you can give him a prototype of their weapon. Learn how to make a paper blade with your own hands. Your son will definitely like this craft; he will be happy to play with this safe blade, imagining mysterious world warriors with adventures.
Nine sheets of A4 paper;
- scotch;
- a stationery knife or regular scissors.
There are several ways to make a blade out of paper, depending on the method you may need additional materials. We present you the easiest and fastest way.
1. Take four pieces of paper and place them one on top of the other. Fold them in half once, then again.
2. Using a ruler, measure a strip one centimeter wide on one side. Cut it with regular scissors or a stationery knife.
3. Trim the corners to create a sharp end.
4. Now you need to secure the sections with tape along the entire width so that they do not open later.
5. Start making the case. To do this, you will need four sheets of paper, folded in half along the long side twice.
Now your child will be able to happily play with a paper blade, imagining himself as an oriental warrior on a special task. By the way, your son can also take part in making the blade; we are sure that he will like this process.
kayabaparts.ru - Hallway, kitchen, living room. Garden. Chairs. Bedroom