How to make your own palm tree from plastic bottles. DIY palm tree – interesting idea, photo, master class

My youngest son, he is seven years old, loves to make things. It doesn’t matter what he works with - construction sets, plasticine or cardboard - any craft in his hands turns into something important and useful for him. He especially likes it when dad or mom participate in this process. Of course, we almost always don’t have enough time for such things, but if we get down to business, we work together and bring what we started to the end. The most serious of our joint work became a palm tree plastic bottles.

How to make a palm tree from plastic bottles step by step with photos

Before closing kindergarten for repairs, all parents were instructed to do some crafts. The teacher told me: “Your vacation assignment is a palm tree of bottles.” Scratching our heads, we got to work. We collected brown and green flowers and found a couple of long iron rods, prepared drill.

We started with the trunk: the bottom of each bottle was cut off to a height of about 20 cm. The edges were cut into teeth for texture and bent a little to look like the scales of a palm tree trunk. In each blank I drilled a hole, the diameter of a long iron rod, which was supposed to serve as the basis for the barrel.

We cut the green bottles in half and cut the edges of each according to the shape of the leaves. I left necks on one of the halves, and I also drilled holes of suitable diameter at the ends of the others.

Having made all the preparations, we started assembling!

How to attach palm leaves?
We take an elastic rod, not thick, but hard. When we make our leaves for plastic palm tree, we cut the bottles and insert them one into another, neck into neck, but leave a cork on the last bottle. We drill a cork and thread a rod, bend the rod at the end so that the leaves don’t fall off, that’s all.






That's all, dear readers, thank you for visiting and reading my site, I advise you to learn how to do

Do you want to have it on your garden plot evergreen palm? Or make it stand in a tub in your home all year round without the need for watering and care? It doesn’t matter that it’s cold outside, such a miracle is completely within your power. Everything is very simple - just know how to make a palm tree from plastic bottles.

What do you need

The material from which we will make our palm tree is found in every home. Save several two-liter containers of water or beer in the colors we need - green and brown. So, let's decide what we might need before making a bottle palm tree.

1. Thick rod for the trunk. It is optimal to use a metal rod, but it will do just fine willow twig or a smooth, even branch of any tree.
2. Plastic bottles Brown. The more there are, the higher the palm trunk will be. In general, they are needed in quantities of 10 to 15 pieces.
3. Similar green bottles for the crown - 2-3 pieces. It’s the same here - than more bottles, the more magnificent the foliage of the palm tree.
4. Awl or drill.
5. Knife or scissors.

Let's start by preparing the barrel. For bark, cut out a piece 10 centimeters long from a brown plastic bottle. To do this, cut off the bottom of the container. We perform this procedure with each bottle. You can also use the top part of the same container, from which you should cut off a narrow neck and then measure the same height to the cut line. We form teeth along the edges of the blanks, like a crown, and bend them to the sides. The height of the cloves should be about 5 centimeters.

Second phase

The next step in our instructions on how to make a palm tree from plastic bottles is to prepare the foliage. For the base of the palm tree crown, we take one of the green bottles and cut off the bottom, but leave the neck itself with the thread for the lid - it will be useful for securing the entire leafy structure. We remove the neck of the remaining bottles too. Then we cut out leaves on each resulting piece, not reaching the end by 5 centimeters. The edges of each sheet can be decorated with cloves, it’s up to your desire and imagination. Just remember, the teeth on plastic bottles are very sharp, so don’t cut yourself! The larger the container, the longer the palm tree’s foliage will be. Now we assemble the blanks one on top of the other on the neck and fix them with a screw cap.

Third stage

All that remains is to make holes, including in the lid on which the crown is attached. They can be drilled with a drill or made with a heated awl. Now all that remains is to assemble the palm tree. Secure the base of the structure in a pot of soil or dig it into the area where your palm tree will grow. Place brown bark pieces on it one after the other, and then crown it with a ready-made lush green crown. The palm is ready!

Now you know how to make a palm tree from plastic bottles. This process does not require any money, but it will good fun for you and your children, will teach them to make small miracles with their own hands, decorate their home or garden and find innovative ways to use seemingly ordinary things like plastic bottles.

In this article we want to talk about how to successfully combine love for the tropics, creativity and unnecessary plastic bottles.

The palm tree is an undeniable symbol of summer and relaxation. But it’s expensive to go to live palm trees, but you want to buy a piece of such a wonderful sunny mood. However, why buy a palm tree if you can make it yourself? Moreover, using items that are easy to find in any home - plastic bottles.

How to make a palm tree from plastic bottles step by step?

• Let's start by cutting the palm leaves. To do this, divide the plastic green bottle into two parts, the top one will be useful

• Now strips are cut from this upper part. Work the surface lengthwise. The shape of the bottle does not matter at all - any will do.

• After slicing, the resulting bottles attached to the cable

IMPORTANT: The cable diameter should be between 12 and 14 millimeters.

• And now you can start making the barrel. Plastic bottles with a capacity of about 2.5 liters of brown color are useful for them.

• Along the bottles make cuts so that the stripes are wide

• The bottom is removed

• Prepare a sheet of metal, the thickness of which should be more than 0.5 centimeters. Two rods need to be welded to this sheet about 25 centimeters long. One of them should be at an angle of 90 degrees to the sheet, and the other at a smaller angle

• Place metal tubes on the rods. The diameter is desirable within 20 millimeters. As for the height, it depends on how tall you want the palm tree to be.

• At the ends of the rods you need to weld metal bushings. It is in them that palm leaves from bottles will be planted.

IMPORTANT: It is better to bend the wires on which improvised leaves are attached.

• Once the leaves have been collected, you can start working on the trunk

Diagram of a palm tree made of plastic bottles

• For clarity, you can see in the diagram how to form future tree trunk made from plastic bottles. Secure an iron rod in the ground, and then string bottles on it. Pre-cut the bottom of the bottles

• For green bottles intended for leaves, the bottom is also cut off. Further each bottle is cut into 3 or 4 parts. Each part, in turn, is designed in the form of a fringe.

• Once several green bottles are decorated in the manner indicated in the diagram, you can start assembling the crown

IMPORTANT: It is recommended to make cuts in the shape of crosses on the brown bottle - this way the green bottles will be attached better. For better fastening You can also fasten the composite crowns inside a brown bottle together with wire.

• Now the top with the crown is attached to the trunk as shown in the diagram

How many plastic bottles do you need to make a palm tree?

There are plastic bottles in every home, but how many of them do you need for a palm tree? For the trunk stock up on 10-15 pieces of brown material, or even more.

Please note the displacement: So, for a craft made from 15 bottles, it is recommended to purchase two-liter material, but for smaller palm trees - bottles from 10 - you can stock up on one and a half liter bottles.

As for the leaves, then it is better to take larger bottles for them - the palm leaves are quite long. On average, one palm requires at least 7 bottles.

How to make leaves for a palm tree from plastic bottles?

• If you want to get wide leaves resembling fans, cut off the bottom first. Then make cuts in the bottle so that three parts are formed. It is recommended to use not only green bottles, but also yellow ones - this way the palm tree will look more natural

IMPORTANT: Bring the cuts approximately half a finger up to the neckline.

• Each of the cuts is rounded and tapered towards the base. in a way that resembles leaves
• Now you need bend all the leaves outward
• The leaves are cut to form a fringe. Fringe is needed on both sides of each leaf. The middle, of course, should remain untouched - 1.5 centimeters is enough. To create fluffiness, it is recommended to bend each clove along to the following principle- one down, the second straight, and the third up

How to make a palm tree trunk from plastic bottles?

• First of all, cut off about 1/3 of the bottle- namely the bottom
• 8 petals are cut out from the remaining bottle. You need to move half a finger away from the lid
• Turn out each of the segments

IMPORTANT: To save material, you can also use a cut-off third of the bottle. However, you will have to make a hole in it to do this. For such purposes, you can use a knife that has been previously heated on the stove.

How to make a palm tree from plastic bottles?

It is best to use as a rod, which will serve as a support for the palm tree. metal-plastic pipe. Its diameter should be 20 millimeters. But there are no restrictions regarding height.

• Assembly must begin from the bottom. And for the bottom, choose greatest details, for the top - the smallest. They are collected using the glass-to-glass method.
• The petals should turn at this time staggered
• The very bottom is best secured with double narrow tape- it connects perfectly. However, you can also use glue
• But 30 centimeters before the top of the stem you need to finish collecting the trunk and start collecting foliage. And also use a checkerboard pattern.
• Once the build is complete, bury the reinforcement 30 centimeters into the ground. In this case, 40 centimeters should remain on the surface. And put a ready-made pipe with a palm tree on this fitting

Options for palm trees made from plastic bottles

Palm trees made from plastic bottles can look different. But it's better to see once, so We present to your attention a selection of photographs with similar artificial trees.

Palm bonsai made from plastic bottles

• To make such a palm tree cut off the top and bottom of the bottle

• From the resulting green plastic material cut small strips, and from them - leaves

IMPORTANT: The strips should be about a centimeter wide.

• Each of the leaf pieces is necessary pierce

• You should also prepare wire for branches- it should be from 0.2 to 0.5 millimeters in diameter

• Now cut 30-50 centimeters of wire and fold it in half. Thread the first leaf and twist the ends 2 or 3 times - this is how it is fixed

• The first rectangle is the top leaf. Place the rest on both sides of it

IMPORTANT: You should retreat 3-4 millimeters from each pair of leaves, and then you need to tighten the wire.

• As soon as the weaving of the twig is finished, curl the ends. In general, you need to stock up on 15 branches for a palm tree. Let the top ones contain the most a large number of leaves, and the lower ones are smaller

• The palm tree will consist of two tiers. The branches should intertwine with each other, creating a common trunk

• Now let's create the foundation. A pot is not very suitable - it is best to fix the palm tree on the island. To make it, you will need a soap dish, saucer, bowl - anything that has an oblong shape. The container is covered with cling film and then filled with liquid alabaster

• Place the palm tree in a container and wait 10 minutes- During this time hardening will occur. Then all that remains is remove the platform How to make a large palm tree from plastic bottles?
  • First of all, stock up big amount bottles Cut them in half and form teeth on the cut part.
  • Next in the ground a metal pin is attached. Alternatively, use strong wire

  IMPORTANT: Be sure to ensure that the pin is firmly attached to the ground.

  • Bottle blanks string onto a pin. It is advisable to go around them in order to create a natural effect.
  • From green bottles cut out the leaves, having previously removed the bottom from the bottles
  • Connect all the elements into general design . They can be held together using harnesses or welding
  
  
  

  How to make a small palm tree from plastic bottles?

  For a small palm like this for a room will be needed only 3 brown bottles and one for leaves with a capacity of 0.6 liters.

  • So, cut each of the brown bottles into 4 equal parts. And a cut of each part cuts need to be formed in the form of triangles per centimeter
  • Bend those cuts back
  • Now divide the green bottle into 3 parts, the largest of which will be the one with a neck - 9 centimeters
  • Collect the trunk from the part that consists of the bottom. Glue other components of the barrel into it
  
  
  

  As you can see, you can create your own tropics in any part of our vast homeland, and at any time of the year. The material is very accessible, and it takes little time. In addition, such a palm tree is perfect for those who do not have time to care for living plants.

  Video: Master class on making a spreading palm tree from bottles

Summer cottages, especially in middle lane Russia, cannot boast of having exotic plants from hot countries, first of all, because these plants need a completely different climate. But sometimes you really want to mentally return to warm sea, sit under a palm tree and watch the sunset. And if it is not possible to organize the sea at the dacha, then “cultivating” a palm tree is very simple, you just need to collect a large number of empty plastic bottles. In this article we offer you a master class on making a palm tree with your own hands.

First of all, it must be said that there are many in various ways build such a palm tree. And they all turn out different, but very similar to the real thing:

In our master class we will try to make a palm tree, as in the photo:

Making a palm tree from plastic bottles

To make a palm tree you will need:

• Plastic bottles (at least 100 pieces, green and brown)
• Scissors
• Candle
• A piece of reinforcement or an iron pin
• Wire

Step-by-step instructions for collecting palm trees:

1. First of all, all the bottles need to be prepared: washed, cleared of labels, and removed the safety rings for the lid from the neck. Any bottle from small to large will do.

2. Using a knife, cut off the bottom of green bottles. The bottom is cut as close to the edge as possible so that the rest of the bottles are longer, then the palm leaves will be fluffy and large.

3. The bottle is cut. 1.5 liter, liter - into three parts, 2 liter - into 4. You need to cut the bottle up to the neck, and cut each petal along the edge - give the desired shape.

4. We make a fringe on each leaf - very finely, so the palm tree will be more magnificent. There should be about 1 cm of untouched bottle left in the center.

5. Light the candle and bring the outer side of the petal to the flame. The fringe will take on an interesting shape and become more lively.

We have a blank, and we have to make 36 of them. Six branches. And each of them has 6 leaves.

6. The next stage is preparing the place for “planting” the palm tree. An iron rod is taken and driven 30-40 centimeters into the ground.

7. Cut the bottom of brown bottles as evenly as possible and put it on a rod. Then we put the next one on this bottle, etc. until the end of the rod length.

8. Using welding rods or thick wire, connect all 6 branches together. To do this, you need to make 3 holes through (crosswise) in the topmost bottle of the barrel. Pass a thick wire through them and put the finished branches with leaves on this wire.

9. At the bottom of our 6 branches there are covers in which you need to make 2 holes. The wire is pulled through the entire branch and twisted at the top (there is the same lid with 2 holes). One more hole must be made to attach the branch to the welding rod at the base.

As a result, we get a wonderful palm tree (small in the picture):

There is another way to make a trunk for a palm tree, as a result of which the palm tree will have a slightly different appearance:

1. To create such a trunk, you need to cut brown bottles so that Bottom part was a little bigger. Top part is cut into 8 parts to the point where the bottle narrows, and then we cut the ends of each of the 8 parts so that they take a triangular shape and bend them at the base, we do the same with bottom bottles, but we make a hole in it equal in diameter to the neck.

So, we told you how to make a palm tree from plastic bottles step by step, now we suggest you familiarize yourself with the video lesson for this master class.

We wish you achievements in your creativity!

A hand-made palm tree does not require maintenance, but at the same time is an excellent interior decoration. The master class offers you the opportunity to create two versions of a palm tree - for the desktop and for the area near the house.

If you want to decorate your interior with exotic elements, then you can try to make a palm tree with your own hands, using one of the techniques presented in this master class.

To create your own simple option palm trees you will need the following materials:

Wire, the thickness and diameter of which will depend solely on your desire for the future size of the tree;

Pliers;

Sheets of paper with adhesive side;

Any material for wrapping a palm tree, here a simple pipe cleaner is used;

Make several pieces of wire of the desired length, their number should be about 8-10. The length of the wire is the height of your palm, so try to make it optimal for what you want. Attach a square of adhesive paper to one end of the wire, which will be palm leaves. Place future leaves on each wire.

Using scissors, give the squares the desired petal shape, making cuts in each of them that reach the wire.

Palm leaves must be joined together to form a tree. Now you should take a strip of pipe cleaner of any color to add realism; the most suitable would be a brown pipe cleaner. Take all the wires with leaves in your hand and connect them using a winding brush. Once you reach the desired height of the palm, you can cut off the excess from the pipe cleaner. Leave one or two centimeters, this will later give the palm tree stability.

Set up the palm tree, giving the leaves the desired shape.

You can make a large palm tree with your own hands to place it in your yard using simple plastic bottles.

To do this, you need to collect green and brown plastic bottles, take a couple of iron rods and prepare a drill, as well as a knife and scissors.

First you need to make a trunk. From each bottle we cut off the bottom with a height of at least 20 cm. The edges should be cut into teeth and bent for clarity. This will allow you to obtain a scaly structure of the palm trunk. Also, in each bottle blank, you should drill a hole equal to the diameter of the iron rod; it will serve as the base.

Now we take the green bottles and cut them in half. Next, we cut the edges of each bottle according to the shape of the leaves. We leave the necks on one half, and drill holes for the twigs at the ends of the others.

The blanks are ready, it's time to start assembling the palm tree!

Attaching palm leaves is not as difficult as it may seem. It is necessary to take an elastic rod, quite rigid, but not thick. We insert the cut green bottles one into the other, neck to neck, and on the last bottle we leave a cork, which we drill and put on a rod; at the end the rod must be bent so that the leaves do not fall off.

The palm tree made from plastic bottles is ready!

A simpler option is also possible