home

We make an original kitchen with our own hands from furniture panels

When buying your own home, every happy owner has a question about the improvement of the apartment. Alas, it is not always possible to place all the desired furniture on the acquired square meters. The space in the rooms becomes much smaller, despite the fact that in most cases the goal is to maximize the useful area of the room. Today, an impressive number of factories and shops offer furniture for every taste and wealth, but it does not always meet the minimum safety requirements. Yes, and it is quite expensive.

You can contact the workshop, where they will not only be able to assemble furniture, but will also help you make competent sketches and drawings.

It is necessary to apply varnish on the structure, preferably in 2 layers.

Of course, you can contact the workshop, where they will not only be able to assemble furniture, but will also help you make competent sketches and drawings. But then again, it won't come cheap. Therefore, more and more people take up the manufacture of cabinets, shelves and other things on their own. Making furniture with your own hands is an impressive approach to furnishing living rooms in terms of adequacy and reasonableness, and at the same time a good way to diversify the interior of an apartment. The best option for the manufacture of cabinets, walls, as well as drawers and shelves will be a furniture board. Especially often this type of material is used to create a cabinet for the kitchen. . The kitchen is the place where the family gathers every evening for dinner, sharing the events of the day. Therefore, it is very important to maximize the usable area in the room, without overloading it with furniture, leaving more free space.

Aesthetically attractive appearance.

REFERENCE. Furniture board is a material based on natural wood. Produced by gluing bars under pressure. There are several varieties of various types of wood on the market: spruce, beech, oak, pine. Used to make accessories, boxes, shelves, etc.

The kitchen is the place where the family gathers every evening for dinner, sharing the events of the day.

As you already understood, making furniture for the home with your own hands is not only interesting, but also quite simple.

Do-it-yourself designs made at home from a furniture board have a number of advantages over factory samples. It does not require expensive equipment; for this, an ordinary tool that any owner can find will be enough. You just need to show a little ingenuity, patience and creative approach to the issue - and now you are already the happy owner of a modern and spacious wardrobe or a beautiful dining table for the kitchen. So, consider the positive aspects of furniture made from this material.

Aesthetically attractive appearance. Furniture made of wood, significantly outperforms other materials and will decorate any room.
Security. As mentioned earlier, it is made from a variety of wood species, an environmentally friendly material without impurities and harmful components hazardous to health.
High maintainability. The door broke, the shelf slanted, the countertop deteriorated? No problem. No need to go to the workshop to repair your favorite wardrobe. This can be done with your own hands with minimal financial investment in repairs. Working with a furniture board is much easier than with the same chipboard, due to the fact that the tree forgives some chips and inaccuracies.
Low cost. In all respects, the furniture board is not inferior to furniture made from a cut of wood. At the same time, cabinets, kitchen tables and shelves look no worse and are durable and easy to use.

Furniture board is a material based on natural wood.

It is only necessary to arm yourself with patience, inspiration, the necessary number of necessary tools.

The choice of design and possible nuances

First you need to decide on the design of the cabinet or table. It is necessary to take into account the free space of the apartment, which can be used. The next step is to create sketches and drawings. If it is not possible to develop a project on your own, then on the Internet there are a large number of drawings for a variety of design options. On the basis of the finished plan, details are made, the amount of material needed is calculated. In addition, the design plan will help determine what size it is better to purchase furniture panels, how to cut them to minimize the amount of waste generated.

Used to make accessories, boxes, shelves, etc.

Based on the desired dimensions and design, it is possible to produce almost any type of structure for the home.

Do not forget about the varnish, selected individually. Due to the fact that the furniture board is still a tree, and the tree needs special care. In order to prevent deformation, swelling of the surface, soaking (this is especially true for kitchen furniture), it is necessary to purchase varnish and cover the surface with it at least 2 times. In addition, the varnish will protect the surface from the negative effects of ultraviolet rays and give a presentable appearance. Today, the construction market offers a variety of varnishes, not only in a variety of colors, but also in textures. The same can be said about stains, which are successfully used in the processing of wood products.

Do-it-yourself designs made at home from a furniture board have a number of advantages over factory samples.

A wardrobe, desk or kitchen table, which you can easily make with your own hands, will meet all your requirements and harmoniously fit into the overall home environment.

For the manufacture of almost any design at home, you do not need a large number of expensive tools. In the arsenal of each owner, there is a high probability that there will be a screwdriver, a grinder, a hacksaw and an electric drill. With this set of tools, you can easily assemble almost any furniture for the home.

You just need to show a little ingenuity, patience and creative approach to the issue - and now you are already the happy owner of a modern and spacious wardrobe or a beautiful dining table for the kitchen.

The order of work in the manufacture of the cabinet

You can assemble the cabinet with your own hands using the example of the simplest model. This refers to a classic two-door cabinet made of furniture panels for the kitchen with a missing vertical partition. Despite the sometimes small size, such furniture can be very roomy and ergonomic. After carrying out the preparatory work for the manufacture of the future cabinet, it will be necessary to cut out all the necessary details and parts. This procedure is performed using a jigsaw and a power saw. To assemble a double wardrobe you will need:

doors - 2 pcs.;
2 side walls;
1 back wall;
the required number of shelves (the size of the shelves may vary).

As mentioned earlier, it is made from a variety of wood species, an environmentally friendly material without impurities and harmful components hazardous to health.

When all the main parts and the frame are ready, you can start assembling. First, you need to take into account the drawers and shelves that will fit in the closet. To do this, it is recommended to leave 775 mm of width when cutting the sheet. Next, it is necessary to fasten the 2 side parts of the wall and the bottom with self-tapping screws. It is best to fasten the structure at a distance of 50 mm from the floor. After the manipulations, it is necessary to start cutting and installing shelves and drawers. The best option for this would be a narrow furniture board, the holes in which are best made in increments of 100 mm. This is done to avoid deformation of the material during the assembly process. When the drawers and shelves are ready, they must be screwed into the cabinet itself with screws. Next, you need to install a cover on the frame, fix the back of the wall and fix the base on the corners. As for doors, it is recommended to use a surface of at least 400 mm. Holes for hinges are made in the doors, the doors themselves are fixed with self-tapping screws to the side walls.

High maintainability.

Assembling a desk from a furniture board

There is nothing difficult in making a multifunctional, compact and comfortable desk from a furniture board with your own hands. As with the cabinet, a sketch and drawing of the desired type will be required before fabrication of the structure can begin. For manufacturing you will need:

square;
plywood (thickness should not exceed 20x20 mm);
parts of the bar and plywood.

In all respects, the furniture board is not inferior to furniture made from a cut of wood.

You can assemble the cabinet with your own hands using the example of the simplest model.

To assemble the optimal version of the table, it is necessary to take into account all the nuances and calculate the required number of niches, shelves and drawers. The size is chosen according to individual preferences and room capacity. It is better to start the production of the table with the manufacture of the countertop. To do this, you need to use a large shield and cut a blank out of it. Pay special attention to the corners of the tabletop, which must be processed and reinforced with bars before assembly. After processing the corners of the tabletop, it will not be superfluous to round off the most protruding parts. This will not only give the table an aesthetically pleasing appearance, but also make it less traumatic for all family members. After the countertop, you need to start making drawers, shelves and doors. Two squares 70x70 in size are cut out of plywood and cut in such a way that 4 triangles are obtained from them. These elements are placed on the back of the frame wall. Based on the finished drawing, shelves and drawers should be placed in specially designated places on the table. The boxes must be screwed with self-tapping screws almost into the finished part of the structure, and then proceed with the installation of the doors. It is necessary to apply varnish on the structure, preferably in 2 layers. The final stage in the assembly will be the installation of pre-purchased fittings, and the desk is ready for use.

First you need to decide on the design of the cabinet or table.

When all the main parts and the frame are ready, you can start assembling.

Shield computer desk

In this case, the principle of making a table is slightly different from the previous one. It is necessary to use 3 sheets, the size of which will be 2000x200x18 mm. This is the most optimal size due to its strength, and therefore durability. When making a table you will need:

edged board (size is selected at will);
plywood parts.

On the basis of the finished plan, details are made, the amount of material needed is calculated.

The best option for this would be a narrow furniture board, the holes in which are best made in increments of 100 mm.

As in the case of a desk, work before assembly must begin with the preparation of the countertop, which is cut out of the shield in accordance with the measurements made earlier and the prepared drawing. On the side surfaces, it is recommended to make two small recesses in order to place the table strictly against the wall, avoiding unnecessary gaps along the edges of the tabletop. On a vertical wall, the best option would be to install a transverse panel. Installation is carried out with self-tapping screws on the frame. The cross panel and the presence of plywood will help to give the table rigidity and strength. After that, a frame for shelves and drawers is made, parts of which are attached to an already finished structure. It is preferable to make as many boxes as possible on this type of furniture for greater spaciousness. To build the upper shelves with the required number of drawers, the shield must be sawn, attaching it to the countertop with self-tapping screws. For drawers and shelves, it is better to use roller mechanisms. As for the part for the keyboard, it is made of a shield, the size of which is 40 mm. Next, it makes sense to proceed with the installation of doors. After preparing all the components, varnishing should be done, after which the final assembly is carried out.

Today, the construction market offers a variety of varnishes, not only in a variety of colors, but also in textures.

Holes for hinges are made in the doors, the doors themselves are fixed with self-tapping screws to the side walls.

Finally

As you already understood, making furniture for the home with your own hands is not only interesting, but also quite simple. It is only necessary to arm yourself with patience, inspiration, the necessary number of necessary tools, make the necessary calculations and drawings. Based on the desired dimensions and design, it is possible to produce almost any type of structure for the home. A wardrobe, desk or kitchen table, which you can easily make with your own hands, will meet all your requirements and harmoniously fit into the overall home environment.