home

We make blinds with our own hands from wallpaper step by step: photo and description. DIY wallpaper curtains

Reading time ≈ 8 minutes

If after the repair you have several rolls of wallpaper left, you can make blinds from them with your own hands, following simple step-by-step instructions and photos. Self-made blinds are a great solution for saving the budget and using leftover finishing materials. After spending just a few hours of your time, you will be able to make beautiful, original, stylish blinds.

An example of paper blinds from wallpaper.

Advantages and disadvantages of paper blinds

Homemade paper curtains have several advantages:

Low material cost compared to real blinds. Often, wallpaper does not have to be spent at all, as they remain after repair. But even if you buy an expensive roll of wallpaper, it will still cost much less.
No need for wet cleaning.
Ease of manufacture.
Easy to replace old or damaged paper curtains.
Easy to mount and remove from window.

However, the obvious disadvantage can be called a short service life, rapid wear. Wallpaper is likely to fade in the sun, which will soon lose its original appearance. Since they cannot be wiped with a damp sponge, if they are heavily soiled, they will simply need to be disposed of. Also, due to the fragility of the material, with careless handling, paper curtains can be very easily torn. This disadvantage can turn into a virtue if you like to change accents in the interior often.

Another disadvantage may be the cheap appearance of the product. Although in this case a lot depends on the quality and color of the wallpaper itself, the craftsmanship, and how harmoniously they fit into the design of the room.

Installation methods and work planning

To determine the desired size of the piece of wallpaper, you need to consider mounting options. Classic blinds can be mounted outside or inside the window opening.

External fastening. The width of the roll should exceed the width of the opening by 10 cm. This mounting option is appropriate for a very narrow window sill.
Internal fastening along the width of the window. In this case, the width of the wallpaper matches the width of the opening. This option is also convenient with a narrow window sill.
Window frame fixing. In this case, the width of the paper roll must match (+/- 2 cm) with the width of the frame. This method of fastening is optimal for a wide window sill in order to maintain its functionality, and the most acceptable in the case of homemade paper wallpapers.

Installation options for classic blinds.

In our master class, we will consider how to make paper blinds step by step with fastening along the window frame. Therefore, at the planning stage, take the appropriate measurements of the window, compare the width of the opening with the width of the roll. If the window has non-standard dimensions, it may be more rational to make paper curtains from two segments.

Necessary materials and tools

To create budget, original blinds, you will need the following materials and tools:

Roll of wallpaper.
Roulette / ruler from 50 cm.
A decorative cord or ribbon that matches the color of the wallpaper.
Scissors.
A piece of double sided tape.
Fasteners.
Hole punch (awl).

For the manufacture of blinds from wallpaper, only varieties of medium-weight paper are suitable. Vinyl wallpaper will be extremely difficult to bend and use.

Necessary materials for the manufacture of blinds.

Step-by-step production of paper curtains

When the measurements are taken, the plan is drawn up, and the tools and materials are at hand, you can start making blinds from wallpaper with your own hands, following the clear step-by-step instructions with photo examples.

Mark the height of the window on the wallpaper, then add at least another 25% of this segment. Part of the extra length will go to the "accordion", the other part - to the mount.
Draw strips of the future accordion up to 3-5 cm wide on a segment. If the width of the folds is greater, the curtains will look very untidy. The stripes must be perfectly even. Fold the accordion so that the entire segment turns into a narrow strip. Cut off the excess.

Wallpaper accordion.

Next, you need to make holes in the accordion. There can be two options here: for the manufacture of classic blinds, you need to make two holes at the edges of the roll, for the manufacture of a swag (a decorative element in the form of a “peacock tail”), you need to make one hole in the center of the wallpaper. Regardless of whether you make two or one hole, it should recede from the edge of the folds by at least 10 mm.

Holes in accordion wallpaper.

To punch a hole, it is advisable to use a special hole punch to get neat punctures and not bend / damage the paper. In everyday life, a hole punch is often replaced with an awl or a screwdriver, but in this case, you need to work very carefully so as not to bend the wallpaper.

Using a screwdriver to pierce holes.

You need to thread a string or ribbon through the hole. At the top edge, it is worth making a small reliable knot. The length of the cord after tying the knot should be equal to the length of the paper piece. Attach clips to the lower end and cut off the excess.

Clamps can act as standard clips for ropes and cords, decorative clothespins, beads, paper clips and other devices. You can not use clamps at all, but fix the height of the blinds by tying decorative bows from a rope or ribbon.

An example of fasteners for a blind cord.

Glue double-sided tape to the upper edge of the paper piece (at the same time fixing the rope knot). The protective film on the other side of the adhesive tape does not need to be removed yet.
If you want to make a decorative version with a fan at the bottom, you will need a piece of double-sided tape up to 20 cm long, the width should be less than the width of the accordion folds. The tape must be glued to one side of the lower fold, then remove the protective film and connect both halves of the accordion, as shown in the photo:

Sticking double-sided tape on one side of the accordion fold.

Gluing the accordion folds into a fan.

In the final, it is necessary to tear off the second protective film from the adhesive tape at the upper edge of the structure and attach the curtains to the window sash.

During operation, the lower fold of the curtain (unless it is made in the form of a fan) will deform and deteriorate the fastest. To extend its life, you can glue a strip of cardboard to the bottom harmonica (before making holes). This will make the entire structure heavier, therefore, when raising the blinds, they will need to be additionally fixed with clothespins.

In general, the whole process consists of the steps shown in the illustration:

Step by step illustration of the process.

A quick way to make blinds

This option is suitable if you need to install temporary sun protection before buying store blinds or curtains, and aesthetics and decorativeness do not play a role. This is a variant of wallpaper blinds for the lazy, since it will take no more than 20 minutes to make it. You can remove and mount this structure as much as you like if necessary.

Required materials and tools:

wallpaper section (length = window height + 25%);
piece of cardboard;
double sided tape;
clothespins.

Description of the work in stages:

You need to measure the height of the window, measure the desired length of the roll and add another 25% to this number.
Fold the wallpaper into an accordion, similar to the previous option.
The bottom fold of the accordion must be reinforced with cardboard using PVC glue, double-sided adhesive tape or a stapler.
Attach double-sided tape to the upper fold of the accordion, remove the protective film from the other side and glue it to the sash of the double-glazed window.

At night, the blinds will hang freely down. In the daytime, the height of the blinds will need to be fixed with clothespins or clips.

"Lazy" blinds from the wallpaper in the lowered form.

Decorating blinds with wallpaper or paper

You can use the remnants of wallpaper not only for making blinds, but also for decorating ready-made window curtains. Blinds made of plastic, wood and bamboo are suitable as a "base". With the help of such a simple decor, you can transform an old, bored interior, hide defects on the blinds and add bright colors to the design of the room.

This decor option is suitable for blinds with a slat width of 5 cm or more.

Necessary tools and materials:

old blinds;
a roll of wallpaper or colored paper;
PVC glue or other for paper, brush;
pencil;
scissors;
ruler.

Step by step work:

The final look of the decorated blinds.

You can make blinds from wallpaper with your own hands together with the kids, because following the step-by-step instructions and tips in the photo, the whole process will be quick and fun. Homemade wallpaper blinds can be used for any room in the house, not only as a temporary solution, but also as permanent original window curtains.

In detail, the process of making blinds from paper wallpaper can be viewed on the video:

Few people know, but do-it-yourself wallpaper blinds are an excellent solution that helps to save a lot on buying store options. For manufacturing, you will need a minimum set of tools, and the resulting product will be an excellent interior decoration and sun protection. There are several ways that help to carry out the manufacturing process quite quickly.

Before making blinds from wallpaper, it is advisable to familiarize yourself with the advantages that this solution provides:

Availability. The cost of the product will be significantly lower than the purchase option, even when using more expensive materials. And if you calculate the cost of paper blinds, then even an annual replacement will be much more profitable.
Ease of manufacture. Indeed, the work does not require special skills and does not take much time. The main thing is to be careful and accurate.
An excellent decorative element. Most of the products found on sale do not have an attractive appearance, and do-it-yourself blinds give room for imagination.
If you choose washable materials for work, then the resulting curtain can be subjected to wet cleaning.

Naturally, the main disadvantage of this design is fragility. The service life is about a year, during which the visual appeal decreases.

Tools and materials

First of all, you need to take care of the availability of the necessary tools.

For work you will need:

Wallpaper that matches the color, you can use leftovers.
Sharp scissors. To avoid the appearance of burrs and creases.
An awl for piercing holes, which can be replaced with a nail.
Meter and ruler.
Pencil. A felt-tip pen is not recommended, it leaves marks.
Cord. As a decorative alternative, a satin ribbon is suitable.
Tape, glue, stapler.
Retainer. A special element used in clothing to limit drawstrings.
You may also need a hammer and a wooden block.

Everything you need is prepared in advance, for the procedure you should use a comfortable workplace.

On a note! When creating this kind of curtains, you want to get an excellent result that you won’t be ashamed to hang on windows, so many people buy whole rolls of expensive materials. The choice of substandard or leftovers, which are significantly discounted, will help reduce costs.

DIY options

Homemade blinds can be made in a variety of ways, each of which allows you to get a slightly different result.

Classic way

Work is carried out on a free flat surface. This is necessary in order to avoid distortions during unwinding of rolls and performing the necessary actions.

Video: Master class for making blinds from wallpaper with your own hands

Making blinds from wallpaper is as follows:

It turns out a rather original element of the interior, on which a minimum of time and money was spent.

More complicated way

There is another option where it will take more time, but the result will be more attractive.

Step-by-step production of blinds from wallpaper with your own hands:

Preliminary marking of the window frame is being carried out.
Stripes 10 cm wide are cut. All parts must be even, without distortions.
The fragments made in this way are folded in half and glued along the cut edges. That is, a flattened tube should turn out.
Next is the most difficult moment: each part has a center line at the top and bottom. Thus, the strip is divided into two parts.
Glue is applied to this line, and the next fragment is glued on top. Each part is glued in the center to the other, you should get an "accordion" with holes.
After connecting all the elements, the product is left to dry completely.
Stepping back from the edge of 100-150 mm, holes are punched and cords are passed through, which are fixed from below with a retainer, and from above with adhesive tape.
To strengthen the structure, you can use a thin wooden rail, to which the upper edge of the wallpaper is glued, and a rope is passed through the holes made and rings are tied.

The principle of operation of the curtain is the same as in the previous version.

roller blind

Do-it-yourself wallpaper curtains can be rolled, but you will need an unwinding mechanism to work.

For this, the following manipulations are performed:

The dimensions of the desired area of the window are determined.
The resulting length is multiplied by 2 and 25% is added.
The necessary fragment is cut off, folded along the length, the edges are fixed.
The upper edge is fixed to a pre-prepared mechanism, and decorative elements are attached below for gravity. You can use special magnets that do not allow the bottom edge to hang out.

Such a design should be made of quality materials of higher density. Of course, this option turns out to be much more complicated and expensive, because you will need to use the promotion mechanism.

Thus, with wallpaper, you can perform many different manipulations that allow you to achieve an interesting decorative effect.

Blinds are versatile mechanical curtains that are suitable for any room. In addition, they will help out perfectly if the apartment is being renovated, but you don’t want to hang windows with old newspapers. In this case, you need to definitely make blinds from wallpaper. With their own hands, they are built for a couple of minutes, they serve for a long time, and it’s not a pity to throw them away if they suddenly get dirty.

paper curtains

As curtains, and even whole partitions, paper began to be used in ancient China. There, this material was relatively accessible and inexpensive. Our mothers and grandmothers also made paper curtains. True, they took old newspapers for this, since they were not yet aware of how to make blinds from wallpaper with their own hands. So the whole yard knew which apartment was being renovated.

Today, paper blinds are not only a temporary necessity. They can be a great decorative element. This is doable if you take beautiful paper as a basis or make a special painting on it with artistic paints.

In any case, it is easy to make the basis for the blinds from the wallpaper with your own hands. Step-by-step instructions for the whole process are illustrated with photographs, so even a child can handle the work. And you can decorate with such curtains both a balcony or a kitchen, as well as a living room with a bedroom.

Preparatory stage

Before you start making blinds from wallpaper with your own hands, you need to prepare all the tools and materials. For this work you will need: a roll of wallpaper, double-sided adhesive tape, a hole punch, string, scissors and a ruler.

First you need to measure the size of the glass. These curtains are made the same width or slightly wider. Therefore, 2-3 stripes will hang on one window, depending on how many vertical sectors are allocated in the frame.

Next, calculate the length of one strip. It should be much larger, because the paper is folded like an accordion, and a beautiful fan is formed at the bottom. It is better to take with a small margin and then cut off than to redo the entire strip due to the fact that it is a bit short.

The last action of the preparatory stage is cutting blanks according to the calculated dimensions. This should be done carefully so that neat blinds hang on the windows, and not bits of paper.

We work with an accordion

This stage of work is given special attention, because without it it is impossible to create blinds from wallpaper with your own hands. Step by step we mark the places of future bends. A ruler is perfect for this purpose. Or, as an option, take some kind of wide strip that perfectly matches the width of the folds, and, applying it to the previous mark, mark both long sides.

Make sure that the marks are strictly opposite each other, and then the bend lines are parallel to the short side.

We begin to form folds. This is where the most difficult moment begins in creating blinds from wallpaper with your own hands. The master class suggests, to facilitate the work, use a ruler or rail, along which to make the initial bend, and only then iron it more clearly. The result should be a neat accordion that easily folds and stretches.

We make a lifting mechanism

We have almost created blinds from wallpaper with our own hands. The step-by-step process guide further leads us to the point of designing a simple system that will allow the curtain to be assembled when the need arises.

We fold the accordion and find its center. In this place, a hole is made with a hole punch through which the lace is passed. At one end of the accordion, it is fixed with a knot, after re-threading it into the extreme hole. This will be the top of our blinds.

In the lower part, we attach a special lock-clip on a spring to the lace. You can use the old one left over from a worn jacket or tracksuit, or you can buy a new one at a sewing store. For now, the creation of blinds from wallpaper with our own hands is almost over, the master class of which we analyze in detail. The next steps are already related to decorating and attaching to the window.

Final stage

When the do-it-yourself wallpaper blinds are almost completed, you need to add a little zest to them. This will be a beautiful semi-circular fan-shaped bottom. It is obtained as follows.

We glue double-sided tape on one of the halves of the blinds from the hole to the edge. Then we bend the other half to it and iron it well. They need to be securely attached to each other. For this, it is best to use a stapler. We release the edges, and they themselves form a beautiful semicircular fan. If desired, it can be corrected by ironing fuzzy folds.

If you figure out how to create blinds from wallpaper with your own hands step by step, then it is obvious that there is nothing complicated in this process. It remains only to fix the design on the window. This is also done with double sided tape.

Decoration options

At first glance, it may seem that do-it-yourself blinds made from wallpaper look poor. Photos also do not always convey the charm of this invention. Additional decoration can correct the situation.

Her options are countless. Firstly, the wallpaper itself has a whole mass of patterns and textures. Combining them on the window, you can achieve a stunning effect. Secondly, different pictures are drawn on a white sheet of paper. The selection of the plot should be done in accordance with the feature of the ribbed surface of the product. Not every drawing will look perfect in such conditions. But the right choice will truly transform the room.

Thirdly, you can glue a paper butterfly on the folds themselves or make a full-fledged application, which will change slightly depending on the form the blinds are in now.

Environmental friendliness, practicality and variability of blinds

Making blinds from wallpaper with our own hands, we solve several problems at once. To begin with, let's recall what store curtains of this type are made of. Few can describe the exact composition of this material. Sometimes unscrupulous manufacturers add cheap and at the same time poisonous components to it. Hanging blinds from wallpaper, we definitely protect ourselves from the influence of dangerous chemistry, which could constantly reside in our room.

The second point is related to the practicality of the application. They are very simple and mobile. They do not require any additional fasteners, and a damaged strip is easy to notice with a new one.

This brings us to the third aspect - variability. Changing paper blinds is easy and inexpensive. This option is suitable if you want to improve something in the interior, but there is no money for new expensive curtains.

Care

In everyday life, wallpaper blinds are unpretentious. They practically do not get dirty, and the dust that has settled on the folds is easily swept away with an ordinary brush. Yes, in some cases they can break. If the damage is small, you can patch it with ordinary transparent adhesive tape from the wrong side.

If the damage is critical, then the entire strip is replaced in 10-15 minutes, taking into account the fact that it will be necessary to find in the pantry the roll of wallpaper from which this thing was made.

This is the perfect low-budget product to transform any apartment. Made even as a temporary measure, such blinds can take root for many years, taking their well-deserved place at the very top of the window.

Today I want to offer you a step-by-step photo instruction for decorating your windows with wallpaper blinds with your own hands. This is a very interesting, unexpected, low-cost and easy solution for "quickly" hiding your personal life from prying eyes, which can be replaced by manufacturing, since these blinds are also made lifting.

And so, for the manufacture of such blinds, you will need wallpaper (you can take the leftovers that you have), scissors, double-sided tape, not a thick rope (I took very thick silk threads that I specially bought for making lifting mechanisms in lifting curtains), a latch and a trailer, a hole punch or an awl.

First, you need to measure the height of the window, and cut off a piece from the wallpaper with a margin, since the folds “eat up” the height of the curtains.

My window height was 133 cm, I took 170 cm.

Then, on the wrong side, I marked the folds with a ruler, the width of which I had was 3.5 cm.

With a hole punch, or with an awl, it is necessary to pierce holes in the ribs of the folds of future blinds:

Then we stretch the rope into these holes to make the lifting mechanism:

We fix this rope at the upper end of the blinds, and from the inside we fix it with double-sided tape:

We lay the lower edge of the blinds in a “peacock tail”, folding several folds (I got 8 of them) in half, and fixing them with glue on both sides of the pierced hole so as not to glue the lifting mechanism:

Now we fix the latch on the rope, thread the limit switch through it, tie a knot, and close the cover of the limit switch. You can do without a limit switch, simply by tying a knot at the end of the rope so that the latch does not accidentally jump off: