Thermal insulation k flex solar ht. Prices for K-FLEX SOLAR HT

Thermal insulation for pipes K-FLEX SOLAR HT- foamed rubber insulation

K-FLEX SOLAR HT (K-FLEX SOLAR) is a high-temperature heat-insulating material made of foamed rubber with a closed porous structure. Thermal insulation K-FLEX SOLAR HT is made from synthetic butadiene-acrinitrile rubber with its subsequent foaming. K-FLEX SOLAR HT thermal insulation is produced in black color, in the form of flexible tubes 2 m long and sheets in rolls 1 m wide. 32 mm, and K-FLEX SOLAR HT sheets are available in thicknesses: 10, 13, 16, 19, 25, 32 and 40 mm.

Application of thermal insulation for K-FLEX SOLAR HT pipes

Thermal insulation K-FLEX SOLAR HT is a special high-temperature insulation, which is designed for engineering systems with a heat carrier temperature up to +150°C. Pipe insulation K-FLEX SOLAR HT is used in low pressure steam pipelines up to 175°C, in pipelines of steam, boiler and industrial equipment, as well as in hot water supply and heating systems. K-FLEX SOLAR thermal insulation is used for pipe insulation to prevent heat loss, condensation, pipe corrosion, as well as their sound insulation.

K-FLEX SOLAR HT high-temperature insulation does not require special maintenance, and during its installation protective equipment and protective clothing are not needed, since K-FLEX SOLAR does not crumble and does not emit dust. K-FLEX SOLAR HT tubes are installed on unmounted pipes by tensioning, and on installed pipelines by longitudinal cutting of tubes.

Advantages of thermal insulation for K-FLEX SOLAR pipes

K-FLEX SOLAR thermal insulation is notable for the invariability of technical characteristics with a long service life, and due to its high performance characteristics, it can be used to insulate pipes of process equipment of configurations of any complexity. SOLAR HT guarantees protection against corrosion of pipes and equipment under insulation. K-FLEX SOLAR HT is an environmentally friendly material, does not contain halogenated and fluorinated hydrocarbons CFC and HCFC, and does not contain asbestos. Pipe insulation K-FLEX SOLAR HT has all the necessary quality documents: fire safety certificate, sanitary and epidemiological conclusion and certificate of conformity.

Thermal insulation properties for K-FLEX SOLAR HT pipes

• has low thermal conductivity
• has a high water vapor diffusion resistance factor
• has high vapor and water resistance
• highly resistant to aggressive and chemical environments
• highly resistant to microorganisms and mold
• has high weather resistance
• resistant to UV radiation
• high fire resistance and low toxicity of combustion products

Technical characteristics of thermal insulation K-FLEX SOLAR HT (K-FLEX SOLAR)

Technical isolation

K-FLEX SOLAR HT - rubber (EPDM) high temperature thermal insulation

for temperatures from -200°С to +150°С

Place a quick order

When placing orders through the site, we provide additional discounts on thermal insulation.

K-Flex SOLAR HT is a high-temperature flexible technical thermal insulation made of closed-cell foam rubber for systems and equipment with carrier temperatures up to +150°С*, short-term up to +180°С*, (taking into account the types of materials used, see recommendations below on text), UV-resistant, self-extinguishing, non-flammable, non-dripping when heated.

Material K-FLEX SOLAR HT - combining elasticity, flexibility, resistance to high temperatures, effectively replaces in heating systems, hot supply, heat points, boiler rooms and other high-temperature systems. thermal insulation made of mineral and glass wool.

Its advantage over mineral wool is that it does not dust, does not absorb moisture, and does not crumble. It is easily color-coded.

The indisputable advantage is the absence of shrinkage of the material during operation and a long service life comparable to the service life of the system or equipment (more than 20 years, confirmed by NIIMosstroy).

Has good maintainability. It is always possible to cut out a damaged section of thermal insulation and replace it with a new one, without losing the quality and appearance of the repaired section.

The ease of installation of thermal insulation ensures high quality of work not only on straight sections, but also on fittings, bends, tees, fittings.

Thermal insulation K-FLEX Solar HT - available in a wide range of sizes and modifications, complemented by accessories.

• low pressure steam lines up to 130C
• industrial pipelines and equipment
• high temperature insulation
• solar systems

• Tubes Solar HT price from 13 rubles.
• Submit your application: [email protected] website
• The product is in stock, you can buy k-flex solar ht as soon as possible.

K-FLEX SOLAR HT specifications

New thermal insulation materials are confidently replacing the usual fiberglass and mineral wool coatings from all areas of operation. This is determined not only by a significantly longer service life, but also by other characteristics. Synthetic thermal insulation materials:

• much easier;
• easier to install;
• not afraid of moisture;
• chemically inert;
• safe to install and operate.

One of the new such innovative materials that our company offers is K-Flex Solar NT insulation, created on the basis of synthetic rubbers. Our company provides the most favorable price of K-Flex Solar HT, thanks to direct supplies from the factory.

This is a universal coating that works well at temperatures from - 200 to + 150 0C, retaining in this temperature range not only elasticity and all the main properties of the structure, but also the main thermal insulation indicators. The peculiarity of the material makes it the most advantageous for insulating high-temperature systems operating at positive temperatures. It is in the range of 0 ... + 150 0С that the heat-insulating and vapor barrier properties are best manifested.

The raw material for the production of K-Flex Solar is artificial butadiene-acrinitrile rubber, which foams during processing and forms a light cellular structure with closed cavities inside, filled with air and inert gases. This determines the low weight of 1 m3 of material - within 75 kg and low vapor permeability and moisture absorption (water vapor penetration resistance 4,000, thermal conductivity - below 0.042 W / (m. ° C) according to GOST 7076).

With regard to fire safety, K-Flex Solar HT belongs to the materials of group G1 according to SNiP 21-01-97. The material practically does not burn and fades in the absence of external sources of open flame. But in rooms with high requirements for the release of toxic substances in case of fire, it is not recommended to use rubber-based thermal insulation.

Scope of application

K-Flex Solar NT is designed for thermal insulation of heat engineering and plumbing systems with coolant temperatures up to + 150 0С. It is very convenient to use it in solar energy systems, this is noted in the name - Solar. Rolls and tubes are used for:

• protection of pipelines with water, steam and other heat carriers;
• isolation of units of pumping systems;
• protection of heat generating equipment from the release of heat into the atmosphere;
• isolation of external and internal parts of high-temperature networks from contact with personnel.

Insulation can be installed in any industrial premises and residential sector - when heated, the release of toxic and allergenic substances is zero.

* - for a short time

Roll Solar HT

The material is produced in the form of tubes with a diameter of 6 - 89 mm (2 m long) and rolls 1 m wide. Rolls of K Flex Solar HT cover an area from 4 to 20 m2, depending on the sheet thickness (10, 13, 19, 25, , 40, 50 mm). To simplify installation and seal joints, you can also buy a special mounting tape from us, developed by the manufacturer specifically for the Solar HT series.

Package

• Tube boxes are 2 meters long. Box parameters: 2092 mm x 387 mm x 324 mm. The box volume is 0.27 (m3).
• Rolls are packed in plastic bags. Height 1.06 meters. Volume 0.3 (m3).

In order for industrial equipment, pipelines, low-pressure steam vents and other engineering systems to last longer, care should be taken to isolate them, protect them from temperature extremes, and the negative effects of an aggressive environment. It is important to pay special attention to the quality of materials for thermal insulation, to give preference to materials that are recommended by experienced professionals.

The choice of high-quality materials guarantees reliable protection against low temperatures and moisture.

An excellent choice could be K-FLEX SOLAR HT. The advantages of K-FLEX SOLAR HT thermal insulation are obvious. This:

• convenience and ease of installation;
• economy and long service life;
• high reliability and efficiency, versatility in application;
• affordable cost of insulating materials.

Thermal insulation K-FLEX SOLAR HT is an environmentally friendly material that is odorless, resistant to fire and many chemicals. The term of its use can be up to 25 years, subject to proper installation. K-FLEX SOLAR HT protects not only from low temperatures, but also from the negative effects of excessive moisture: it does not react with water and is a reliable barrier to the formation of rust on pipes or other metal surfaces.

K-FLEX SOLAR HT is manufactured using a honeycomb rubber foam that is flexible and durable. This material enjoys well-deserved popularity and is widely used in various fields.

K-FLEX has a light weight, which greatly simplifies its transportation and does not require special equipment to lift materials to the last floors or roofs of buildings.

The best conditions for the purchase of modern thermal insulation materials

We sell K-FLEX SOLAR HT insulation in rolls. The catalog presents K-FLEX insulation in a wide range. Each buyer will be able to choose products that will protect pipes of the required diameter. Our managers will be happy to answer any questions from customers and provide detailed information about the products to understand the variety of new products. To purchase K-FLEX in rolls, just add the product to the "Basket" and fill out the contact form.

The prices of thermal insulation remain favorable regardless of the volume of the order. We do not limit customers in choosing the form of payment and help to place an order at any time. On our website, you can not only purchase insulation, but also order its installation at any facility.

We offer affordable cost of materials, their high quality and safety for health and the environment. Do not waste your time looking for better offers, as we offer the best purchase conditions, listen to the wishes of all customers, work with legal entities and individuals. Order the materials you need now!

Thermal insulation K-FLEX SOLAR HT is available in rolls, tubes and self-adhesive tapes. Pipes come with a thickness of 13 mm to 32 mm with an internal diameter of products from 10 mm to 44 mm. The length of one pipe reaches 2 meters. Sheets in rolls have a thickness of 10 mm to 32 mm with a width of 1 meter.

The K-Flex Solar HT material has been widely used for thermal insulation:

• Hot water supply systems;
• High-temperature industrial equipment, pipelines;
• As equipment protection in boiler rooms, other heating systems;
• In systems using alternative energy sources, including solar.

BAUSTROY will answer all your questions, call us, and we will quickly make a calculation and design of an object using K-FLEX SOLAR HT thermal insulation. Our managers will be happy to offer the best prices for insulation, select analogues on the market.

Manufacturer

Since 1989, the Italian company L'ISOLANTE K-FLEX has been producing polymeric materials for acoustic and thermal insulation. A wide range of products allows you to cover a wide range of markets, from the oil refining industry to systems, used renewable energy sources.

The enterprise has 14 production facilities, one of which is located in the Moscow region. The release of thermal insulation in Russia allows to reduce the time and cost of production of goods, provides a flexible schedule for the plant. Domestic production is focused on the main brands of K-FLEX, equipped with the latest high-tech equipment, using only the latest developments and recipes.

Specifications

The basis of K-Flex Solar HT insulation material is an infused synthetic rubber used in the field of equipment protection from high temperatures up to 130°C. Sometimes it is possible to use insulation for a short time (no more than a day) with a working surface up to 150 ° C, with the exception of objects that have special requirements for the toxicity of combustion products.

K-FLEX SOLAR HT materials have the following properties:

• Good vapor permeability;
• Resistance to decomposition and negative effects of microorganisms, mold;
• Elasticity and flexibility at different temperature conditions;
• Resistance to water vapor diffusion;
• Ability to self-extinguish in case of fire at the facility;
• Low thermal conductivity and water absorption;
• The insulation does not contain CFC/HCFC compounds, halogens or asbestos;
• K-FLEX SOLAR HT insulation can be used for more than 20 years.

When installing Italian insulators, there is no need to use special protective suits, goggles and other equipment. This is due to the fact that the material does not emit dust and does not crumble. K-FLEX certificates of conformity and more detailed information about the material are collected in