Various niches and their drywall constructions, preparation and installation. Do-it-yourself drywall niche - step by step photo instructions How to build a drywall niche

If you know how to make a drywall niche with your own hands, you can create an original design in any room of your apartment at a bargain price.

Since it is not difficult to work with drywall, and it is inexpensive, this material is optimal for finishing work.

There are many options for finishing drywall, and niches are one of the most popular.

Particularly in parts, you can find a niche for a brick wall, which is the most difficult to work with.

Niches are not only attractive, but also quite practical - you can build, for example, shelves in the toilet for storing hygiene items, or place a wardrobe or other furniture there, depending on the size of the structure.

The manufacturing process is also not too complicated, so you can easily handle it yourself.

In the article, you will receive instructions on how to make a drywall niche, and you can bring it to life in your apartment.

The very process of working with drywall does not present any particular problems, but you need to take the preparation more carefully, and then you will not have a question: how to make a niche in the wall?

First of all, you need to decide on the design and structure of the niche, as well as its purpose.

Decorative niches can often be found in the living room or bedroom - in such rooms you can install shelves, or simply paint the structure.

More functional shelves can be found in the bathroom or toilet - you can place cleaning products and hygiene items there.

Sometimes niches in the wall are made under a dressing room or wardrobe - such a design should be more impressive in size, and it is best to make it in the corridor or on the balcony in order to save living space as much as possible.

There are also devices for windows, and decorative niches for curtains, which also act as an original decorative element.

After you have decided on the size and shape, you need to make a frame for the niche.

Whatever type you choose: a niche for a wardrobe, functional shelves in the toilet, a curtain box or just a decorative element, a frame will be needed.

A properly made frame will provide the structure with stability, reliability and an attractive appearance.

To make it, you will need guide profiles that are needed to fix the structure against the walls and give the product the necessary contour, and profiles that give the structure rigidity, as well as the drywall itself.

To create a design, sheets of 12.5 mm in size are suitable. You can buy both regular and moisture resistant material.

On a brick or other wall to which the structure will adjoin, it is better to draw the contours of the future niche to make it more convenient to work.

All parts of the structure are drawn: shelves, if provided, additional elements for a wardrobe, etc. It is better not to be lazy and do everything carefully, then installing the structure with your own hands will be easier.

Along the contours, you need to set the guide profiles and fix them with dowels.

Where the sections are straight, it is easy to work, it will be more difficult if you make a curved frame - then you will have to smoothly bend the metal profiles with an arc.

This can be done by cutting the material in increments of 50 mm, or by purchasing a finished design of the desired shape if you do not want to work on it yourself.

The field for installing profiles needs to make the frame voluminous in accordance with the size that you have chosen for the depth of the niche.

On the ceiling and floor, you need to fix the guide profiles so that their ends are set strictly vertically.

In addition to the volume, at the same time it is necessary to make the front plane of the niche, which must be completely flat.

The corners are made from twisted guide profiles. Shelves should be at 90 degree angles to each other.

The corner pieces must stand upright and be connected to the top and bottom profile and placed on the ceiling and on the floor.

It is necessary to check how correctly they are installed in two areas: on the front and side surfaces.

After that, the profiles must be fastened to each other and to the corner post using self-tapping screws.

Installation of shelves, sheathing structures, design

After you have made the frame voluminous and rigid, you need to make shelves.

The technology for manufacturing shelves in a wardrobe and a decorative niche is the same and takes place in several steps: the first step is to set the plane of the shelf using a level and self-tapping screws.

After the correct location, you need to reinforce the shelf with the help of load-bearing profiles (this is especially true if you are making a closet, where the load on the shelves will be slightly higher).

We do the sheathing of the frame with drywall simultaneously with its manufacture - it is more convenient and faster to work with your own hands in this way.

Before starting installation, the entire inside of the niche must be sheathed with drywall - it is easiest to do this with one continuous sheet than sheathe cut materials, keep this in mind.

In addition, a structure sheathed with solid drywall will be more rigid.

The fewer joints in your frame, the easier it will be to sheathe it with drywall - this applies to all products made from this material: decorative niches, wardrobe devices, curtain boxes on the ceiling, etc.

A decorative niche, shelves in the toilet or even a closet can be made with lighting - for this you need to carry out all the necessary communications at the stage of installing the skeleton.

If you want to make soundproofing, then you need to lay mineral wool in the voids of the frame.

The location of the lamps may differ, depending on the type of construction: decorative niches are most often sheathed around the perimeter, shelves can be illuminated in the closet, and the curtain box can be trimmed with lamps from above.

You can reflect the lighting system in advance in the diagram, so that it would be easier to mount it yourself later.

Noise isolation is an optional step, but if it is not done, then you need to be prepared for the fact that at the slightest contact with objects, drywall will make a rumble - this is not too noticeable if it is decorative or for curtains.

However, if you make it, for example, under the shelves in the toilet or closet, then soundproofing is still desirable.

Sheathing the niche frame with drywall takes place in several stages: first you need to dock the individual parts of the drywall.

Where the parts of the material are connected, you need to make additional stiffeners, on which then screw a separate piece of drywall.

If this is not done, then over time the material will crack, even if the seams are sealed with high quality. Lack of jointing also leads to cracks.

To avoid them, where the drywall sheets are connected, you need to chamfer. After that, you need to install self-tapping screws measuring 150-200 mm.

The last stage is decoration and decoration. In order for the paint or other coating that you have chosen to finish the niche to fit well, the surface must first be treated with putty.

It can be abandoned only if you are going to plaster with stone or tile. Often, surface puttying is a more time-consuming step than assembly, installation and sheathing of the frame.

It is necessary to carefully process the corners and joints, as well as putty even the smallest irregularities of drywall with putty.

You can finish drywall with almost any material. The most common option is to simply paint the surface in the color you want.

Niches for curtains can be made contrasting, and shelves in the toilet, on the contrary, to match the color of the finish. A sliding wardrobe is most often painted under a tree, and inside you can cover a niche with wallpaper to match the color of the room.

Often drywall niches are equipped around a brick wall - it can be in a corridor or bedroom.

In this case, the wall can be left as is, especially if the room is decorated in a loft style or similar, and the niche can be painted to match the color of the wall, or painted with patterns.

Working with drywall is easy not only in creating niches, but also in finishing the material, so making a design with your own hands should not be difficult.

With the help of drywall, you can give the apartment a unique design by creating niches for curtains in different rooms, under windows, wardrobes, shelves in the toilet or corridor, decorative niches for TV and other equipment, etc.

There are a lot of opportunities for working with drywall, and its simplicity makes it an ideal material for creating structures with your own hands.

In the repair and decoration of residential premises, a person’s desire for beauty is expressed in different ways - some want to decorate their home with finishing materials of incredible colors, others focus on designer furniture, and still others prefer the structural elements of an apartment or house. In principle, both of them are partly right, all these methods are designed to improve the comfort of the premises and create coziness in them. But few people understand the fact that the greatest results are achieved exclusively in the process of using all methods at the same time - an apartment or house should have good furniture, high-quality beautiful surfaces of walls, floors, ceilings, and, of course, decorative structural elements. We will talk about one of them in this article, in which, together with the site, we will deal in detail with the question of how do-it-yourself drywall niches are made, what material is needed for this and what tools are used to create them.

Do-it-yourself drywall niche photo

How to make a drywall niche: frame device

As with all plasterboard products, the frame is the main component of the entire structure - it is on it that the shape, rigidity, reliability and even the appearance of the finished product depend. The end result completely depends on how responsibly you approach the construction.

To build a drywall niche frame, you will need three types of materials - these are ud guide profiles, with which the structure is tied to the walls and the contours of the product are formed, cd profiles, designed to stiffen the structure, and a sheet thickness of 12.5 mm (better moisture resistant, but you can also normal).

How to make a drywall niche frame with your own hands

Before you start working, you must have a clear picture of what you want to get in the end - you cannot do without it. You may even have to draw a small sketch or a simple drawing that needs to be transferred to the wall in real size. The drywall outlines drawn on the wall will really make the job easier. You will have to draw everything - every shelf and every bend. The more precisely you do this, the easier it will be to create it.

Guide profiles ud are installed along the drawn contours. Fasten them with dowels and a perforator. There will be no problems with straight sections of the structure, difficulties arise when designing radial surfaces - for their construction you will have to learn how to smoothly bend metal profiles. In principle, this is not difficult - in order to get a smooth arc, the shelves of the guide profile are cut in increments of 50mm. If you do not want to do this work, then purchase a ready-made arched profile, in which the cuts are already laid at the enterprise. In my opinion, this is a waste of money - it is quite simple (within 2 minutes) to cut with a grinder or even with scissors.

How to make a drywall niche photo

Okay, let's move on and give our frame volume. In accordance with the required depth of the niche and drywall shelves on the floor and ceiling, it is also necessary to install guide profiles - their ends, located on opposite surfaces, must lie in a strict vertical level. Together with the volume of the structure, the front plane of the plasterboard niche is simultaneously set, which must be perfectly flat.

Do-it-yourself installation of a drywall niche photo

Now let's take a look at the formation of corners - as a rule, they are made from two guide profiles twisted together. Their shelves should be at an angle of 90 ° relative to each other. These corner pieces are installed vertically and are inserted into the top and bottom profiles located respectively on the ceiling and floor. It is imperative to check the level of their installation in two planes at once (on the front and side surfaces). If everything is in order, then you can safely fasten the guide profiles and the corner post to each other - for this, self-tapping screws ø3.5mm by 7.5mm are used (popularly they are called "texes" or "fleas").

Having given volumetric outlines to the frame, at the next stage, a drywall niche with your own hands will require you to make it rigid. Hoping that drywall will cope with this task is not worth it. The frame is strengthened simply - for this, the cd carrier profile is used. It is cut into small pieces, the length of which corresponds to the distance between two opposite guides, inserted across them and fastened with two texes on each side. Again, do not forget to control the level and plane of the resulting surface. Such a reinforcement of cd load-bearing profiles on the side faces of the structure will need to be installed with shelves in different directions - in addition to giving rigidity to the frame, they additionally serve as the basis for screwing drywall. And you have to twist it in such products both inside and outside the niche.

Drywall niches in the wall photo

After the frame of the drywall niche is reinforced, you can begin to form the shelves. The principle of their manufacture is almost the same as the one described above. First, with the help of ud, a level and self-tapping screws, the plane of the shelf is set, after which it is reinforced with load-bearing profiles located shelves up and down every 300mm.

Most craftsmen (and I am one of them) practice gypsum sheathing along with the manufacture of the frame. Before installing the shelves, the entire internal cavity of the niche is sheathed with drywall - believe me, it is easier to fix one large sheet than to pervert over its individual pieces. And the design due to this approach acquires additional rigidity.

Do you know the golden rule of drywall? Fewer joints - less headache later. This principle applies to all products, including drywall niches.

In addition, this approach to business will help diversify this tedious and monotonous work a little.

Niches and drywall shelves photo

An important point in the process of creating decorative niches from drywall is its illumination and noise reduction - all this must be considered at the frame manufacturing stage. It is necessary to determine the location of the fixtures and lay the necessary electrical cables, and fill the entire internal space of the frame with mineral wool. In principle, if you are satisfied with a sonorous hum even with light impacts of objects on a niche, you can refuse noise reduction - some people put up with this phenomenon perfectly, and some are annoyed.

Decorative niches from drywall photo

Installation of a drywall niche: frame sheathing

This stage of forming a drywall niche is quite simple and does not have any special nuances, with the exception of a few, which we will consider below.

1. Firstly, this is the docking of individual parts of drywall. At the junction of the individual parts of the sheet material, it is necessary to install additional stiffeners, to which two separate drywall fragments are screwed. If you ignore this nuance, then during operation you will get a crack in this place, even despite the high-quality sealing of the seams.
2. Secondly, the absence of which again leads to the appearance of cracks. At the joints of individual sheets of drywall on their cut edges, it is necessary to chamfer.
3. Thirdly, this is the step of installing self-tapping screws. It is standard and is 150-200mm.

Well, in conclusion, I would like to pay a little attention to decorating a niche, or rather, preparing for this process. If you think that you can refuse to putty on it, then you are deeply mistaken - a drywall niche does not provide for puttying in only one case, when it is lined or tiled. It is this stage of manufacturing a drywall niche that is the most time-consuming - you will have to install a huge number of perforated corners, lay dozens of meters of reinforcing mesh in the corners and at the joints, and putty even the smallest cavities with high quality.

Such a voluminous element of decor allows you to remove many everyday problems without destroying the base. When assembling drywall niches with wall mounting (this is a more correct definition of the essence of the work), various goals are pursued - arranging a place for storing toys (if it is for children), installing household appliances, optimizing the usable space, which allows more rational placement of furniture in the room, additional room decoration or otherwise.

There is no need to consider all the options, since the specifics of cutting and fixing drywall (and for a niche built by oneself, GKL is the best material) remains unchanged, regardless of the owner’s implemented plans. If the reader understands all the features of each technological stage, then without any difficulties he will be able to make a drywall niche with his own hands according to his own drawings - of any size and configuration. The nuances of designing and assembling the box is the topic of the proposed article.

Preparatory activities

Drafting

No one will work "blindly". Therefore, you need to choose a place and take all the necessary measurements, taking into account the volume of the niche and the convenience of attaching its frame to the wall, not only with your own hands, but also with the help of the tool available in the house. Especially for such a one-time job, it is hardly reasonable for the owner of a city apartment to acquire, for example, a “grinder”.

The remains of the material after cutting it are, as a rule, extra costs. And whether cutting profiles, slats or small fragments of gypsum boards will be useful in the household is unknown and unlikely. All the materials necessary for home-made niches are sold in the form of blanks of standard sizes.

To reduce the amount of waste, it is desirable to correlate them with the dimensions of the place where the structure is supposed to be installed, thereby optimizing costs. Therefore, the design features depend on the products (samples) that are supposed to be purchased. By the way, it is this nuance that is often not taken into account if something is done in the house with your own hands.

The dimensions of the niche compartments in those places where it is supposed to install household appliances on the shelves (for example, a TV) should be slightly larger than the dimensions of the equipment. This is due to the need for natural cooling of the equipment in the operating mode. Otherwise, overheating and equipment failure are inevitable.

Material selection

For frame

There are few options for a niche - wood or metal profiles. From the point of view of practicality, it is better not to mess with a tree, regardless of the specifics of the room. The main reason is that it gradually dries out, and changes in humidity and temperature affect it. As a result, the entire structure will “lead” over time.

And since drywall, by definition, is a rather brittle material, a niche, the frame of which is assembled from wooden slats, will not stand idle for a long time.

It can be different, so it’s wiser to opt for aluminum - and the weight is less, and the workpieces are cheaper, and the processing is easier (since the material is soft).

For lining a niche

There are several for sale. One thing is certain - for a niche it is necessary to choose products of the "moisture resistant" category. But in terms of thickness, one should focus not only on the shape and dimensions of the box, but also on the purpose of the shelves. If something massive is not supposed to be placed on them, then arched drywall is quite enough. Its thickness is less than analogues of the ceiling and wall (about 6 mm), respectively, and the cost is lower.

The order of construction of a niche

Wall marking

Nothing complicated - a drawn drawing is projected onto it (taking into account the scale).

Foundation preparation

There is no need to talk about her thoroughness, since the niche will close all the flaws. But in order to evaluate the convenience of fastening in this particular place, you should attach a profile rail to the wall and see how tightly it fits, and if there are any significant distortions. If necessary, at least partial alignment will have to be done. The technique is selected depending on the size of the defect.

It is easy to bring down the bulge (chisel + hammer), seal it into the recess with a solution. In some cases, to give the profile the correct position, wedges, linings, and the like can be used during its fastening.

Laying el / wiring

If it is decided to highlight a niche, then you need to think about the method of connecting lighting fixtures in advance.

Recommendation - in order not to gouge the wall under the strobe, you can put the main part of the line under the plinth. By the way, plastic products are just designed for the secret laying of wire (cable) communications. Comfortable and modern.

Frame assembly

The specifics of the work depends on the dimensions of the future niche.

If the box is small, and the base for mounting is fairly even, then it is more convenient to assemble the frame first, and then fix it on the wall.

What to consider - when assembling the skeleton of the box, one cannot do. To check the correct geometry of the niche frame, it is advisable to use a square. It is easy to make it yourself, and the length of the "rays" of this device should be commensurate with the smallest side of the mounted three-dimensional form. Then the total value of inevitable measurement errors will be reduced to a minimum.

A niche of impressive dimensions is mounted in parts, like any prefabricated structure. According to the markup, the carrier profiles are attached. They also serve as guides. The appearance of the niche and its stability under load depend on how accurately (according to the drawing) and reliably they will be fixed on the wall.

Recommendation - if the niche is designed in such a way that it reaches the floor, then you should not be limited to just wall mounting the rails. At the bottom, they should all be “fastened” (if possible) to the floorboards as well. Such installation will give the entire assembly additional stability.

All that remains is to assemble the niche frame from individual parts (sections of the metal profile) and check its geometry and resistance to deformation.

Plasterboard sheathing

Fragments of the required dimensions and geometry are prepared in advance. Immediately after cutting, each should be tried on at the place of its installation. If necessary, adjust to the required size. At the same stage, drilling holes for self-tapping screws is also performed.

What to consider when sheathing

• The heads of the niche fasteners must be recessed into the drywall sheet. Therefore, chamfers are necessarily made with a larger diameter drill.
• How will the finishing of the niche be done. Based on this, the need and method for sealing the joints of sheets in the corners is determined. There are several options for this work. Since it is unlikely that it will be possible to make cutting ideal with your own hands, you can remove a part of the gypsum along the edges (in the form of a chamfer). After joining the GKL fragments, the seams formed on the surface of the niche can be easily filled with putty, leveled and sanded. Additionally, it is recommended to stick a serpentine tape on top and paint over with a thin layer.

niche finishing

If the niche is supposed to be painted to match the walls, then its surface should be prepared. Firstly, the paint on the “clean” drywall will fall poorly, and secondly, it will partially soak into the gypsum, and the sheet will swell. Therefore, it is advisable to first process the entire box with finishing putty. Its difference from analogues is that all solid fractions in the composition of the mixture are microscopic. After leveling such a coating, it is polished with the finest sandpaper.

For all other types of finishes (for example, wallpapering), all sides of the niche should be treated with a primer. It will significantly increase the adhesion of surfaces and provide a stronger bonding of the cladding.

If it is necessary to equip a backlight in a separate compartment of a niche, then it is more expedient to use (cords). Installing spotlights is a more complicated process. First, you have to drill drywall. Secondly, calculate the optimal power of the bulbs. In addition, the tapes can be shifted at any time by changing the lighting and design of the room. You won’t be able to experiment with lamps in this way, except by turning off one or more of them.

When using lamps with light bulbs, the circuit should be powered through a step-down Tr (36, 24 or 12 V). Higher voltage, given that the frame of the niche is metal, is not recommended.

When arranging a niche with your own hands, do not be afraid to experiment. There is no standard for such prefabricated structures. If desired, swing or sliding doors can be made in separate compartments.

There are many options for how to place a TV in a room: install it on a special cabinet, hang it from the wall on brackets, or build it into a niche. The latter method is remarkable in that it allows you to hide wires and sockets, harmoniously fit the screen into the surrounding space, and often also decorate the interior in an original way. In addition, arranging a drywall niche does not require large expenses or special skills - you just need to be able to hold a knife and a screwdriver in your hands, and we will talk about installation technology and design options in this article.

We make a niche for a TV from GKL with our own hands

To make a beautiful TV portal, you need to prepare:

- aluminum profile of the brand CW (ceiling-wall) and UW (guide), for curved elements - flexible;
— accessories — connectors, hangers, extension cords, corners;
- fasteners (self-tapping screws for plasterboard and profile, dowels);
- drywall sheets - standard, if necessary - arched;
- primer and putty for drywall;
- sickle tape for sealing seams, joints, internal corners;
- Decoration Materials.

Of the tools you will need a puncher (to drill holes in the wall), a level (preferably a laser one), a screwdriver, a knife for cutting drywall, scissors or a hacksaw for metal, sandpaper for grinding plasterboard, paint thread, spatula, roller for finishing.

First you need to decide on the design of the future niche. It can be protruding, with open corners or recessed. In the second option, you will have to cover most of the wall with drywall, but thanks to this, the interior will become more thoughtful and stylish.

The shape distinguishes between rectangular horizontal, rectangular vertical, square, oval, curved and complex structures. The standard rules apply here: lines stretched upwards visually raise the ceiling, and parallel to the floor allow you to expand a narrow wall. Unusual geometry is suitable for rooms with a non-standard layout or spacious rooms.

Around the TV, additional shelves are often arranged for the placement of a stereo system, decor and books. If desired, you can even make a whole rack or drywall cabinets, which will look next to the niche as a single ensemble.

Installation of the structure is carried out in stages. First, using a laser level and a tape measure, markings are applied to the wall, then a metal frame is constructed according to the drawing. The depth of the niche should be calculated based on the thickness of the TV, adding 5-7 cm for wire clearance and ventilation. The free space between the wall and the screen is necessary for air to circulate there and cool the equipment. It is also customary to leave space around the monitor - firstly, it is more convenient to hang and remove it, and secondly, after some time you may want to purchase a model with a larger diagonal.

Before starting work, you need to decide where the electrical wiring will be hidden - you can make channels under it or hide it inside plastic skirting boxes.

The guide profile is mounted first, while the dowels are placed at a distance of no more than 40 cm from each other. Then vertical elements are attached to the ceiling and floor. The base of a small niche can be made separately, and then installed on the wall.

The next stage is the sheathing of the frame with drywall, previously cut into the appropriate shapes. You should start with small and complex elements. Self-tapping screws are used as fasteners, the steps between them are 25-30 cm.

When drywall is installed, it is leveled with putty and primed. Seams and joints are reinforced with sickle, the outer edges are closed with perforated metal corners. Starting putty is applied over the primer layer, after grinding - finishing.

How to arrange a niche for a TV

The design of a niche for a TV needs to be approached creatively - it can be partially or completely painted with water-based paint, wallpapered, sheathed with flexible stone, fabric, painted by hand or using stencils, decorated with polyurethane stucco molding, laid out with mosaics or decorative tiles. It is only important to adhere to a sense of style so that the portal does not conflict with the rest of the situation.

Drywall niche for TV in the living room

As a rule, in the living room they are not limited to just one recess for the TV screen, but arrange a whole wall - with shelves, interesting lighting, beautiful decor and paintings. This is an excellent alternative to outdated chipboard headsets.

Plasterboard construction takes up less space than standard cabinets and shelving, and looks more modern. In addition, having set the goal of zoning the space of an apartment, it can be installed instead of an internal partition, saving free space, materials and partially replacing furniture. Functional shelves, for example, for books, should be made of wood or durable glass - they will definitely withstand the load and diversify the design.

Depending on the chosen style, the niche for the TV in the living room can be decorated in different ways. For example, country will successfully complement a false fireplace and decorative stone; in modern, smooth asymmetry will be appropriate; minimalism requires a clear rectangular geometry; Provence will be decorated with delicate floral patterns, and classics - columns, gilding and stucco.

But with all the splendor of the finish, the central place should be occupied by the TV. This means that in and around the niche, lurid, saturated details should be avoided - they will compete with the video sequence, causing eye fatigue and irritation. For the same reason, it is better to close large shelves with doors so that the variety of things on them does not cause a feeling of disorder.

Drywall niche for TV in the bedroom

In general, the rules for finishing a niche in the bedroom are almost the same as in the living room. The only caveat is that it is advisable to choose softer, pastel shades and unobtrusive light. Smooth lines, as well as rounded bends, are subconsciously perceived as safer and calmer than angular structures or sharp breaks. However, this is a matter of taste.

Since a small room is usually allocated for a bedroom, it is also better to make a niche compact. On the sides or below the TV, you can arrange paired recesses for stereo speakers, and under them - shelves for CDs, magazines and various small things. The remaining space will help to fill in photographs, interior candles or figurines.

TV niche lighting

Lighting plays a significant role in the design of a drywall niche for a TV, making it noticeable and attractive in the evening. The modern design uses the safest LED technology in the form of spotlights, diode strips or garlands.

An interesting effect can be achieved with neon threads, which are distinguished by a bright uniform glow. As a rule, flexible ribbons and threads frame the perimeter, placing them in the inner corners of the shelves, behind the equipment (monitor, speakers), along the ends of the protruding niche. In this case, the light should be directed to the front wall or to the sides, but in no case to the room - otherwise it will blind the eyes.

The same rule applies to spotlights. They are usually mounted in several pieces at the same interval, placed inside the recesses, above or below, as well as along the inner edge of the relief elements.

As for the shade of lighting, warm white is considered the most comfortable for the eyes. A yellowish undertone creates a cozy, relaxed atmosphere, although next to it, for example, pink will appear peach, and blue - greenish. Cool white mimics harsher daylight and creates crisp shadows without changing the surrounding colors in any way. Neon shades (blue, green, red, purple) are best used only in the living room and turned off while watching TV.

GKL niche design for TV - photo

In addition to the above, we bring to your attention a selection of interesting design options for plasterboard structures and TV niches. Among these photos, everyone can choose the design that they want to repeat at home, in their living room or bedroom. Inspiration to you and beautiful interiors!

The decor of modern housing is not an easy task, it is often necessary to equip and decorate the space of the room with a sufficiently large number of useful items, and at the same time not to lose vital space. Therefore, all the most expensive and important items get a residence permit on shelves or niches in a plasterboard wall.

For an ordinary person who started a design version of a repair in a house, sheet drywall can be considered a gift of fate. The extreme simplicity of working with plasterboard walls with considerable possibilities for implementing the most interesting design solutions makes gypsum board the most popular material in the manufacture of plasterboard walls with niches.

Why are drywall niches so popular?

It so happened in the apartment samostroy that niches in plasterboard walls allow you to get advantages in the perception of the interior over furniture delights:

• Get rid of hanging shelves on the walls, whatnots or intricate coasters that greatly eat up the usable volume of the room;
• Raise the most necessary things in life and pleasing to the eye on the walls, thereby giving them a new content, and updating the appearance by simply replacing some items in the niches with others;
• Often, niches in plasterboard walls make it possible not to use heavy furniture cabinets or other similar home “architecture”, while successfully zoning the territory with architectural “highlights”.

For your information ! The use of walls with a variety of drywall niches will allow you to properly distribute the usable space of the room, periodically change the decor and interior of the room in a short time and at low cost.

Such experiments can hardly even be called a redevelopment of an apartment or room. Moreover, an unusual building in the living room with a niche in the drywall wall can be the most impressive impression of the interior renovation or renovation.

What are drywall niches

For the most part, niches allow you to "drown" some of the objects or even a piece of room space into the walls, a simple technique and quite often used in one-room apartments.

Most often, decorative niches are made in a plasterboard wall. Stylish things, even antiques, are additionally purchased for such projects, and interior items are often rearranged.

A simple idea will help to successfully refresh the look of the walls or enhance the feeling of comfort in any corner of the apartment:

Advice ! The classics of the genre have long been arches, combined with plasterboard walls - partitions and emphatically utilitarian wall niches for everyday items.

We divide the space in the room into personal and joint

Using a drywall wall with a niche is almost the only affordable way to create comfortable working conditions if there is a teenager in the house. The feeling of individualism and the desire to have the boundaries of your inviolable territory can be supported by a small drywall construction, while you do not have to partition off an apartment or room with a wall of many furniture or wooden screens, curtains or doors.

But such options will require knowledge of the basics of home construction of plasterboard walls, otherwise niches and openwork racks will make the structure weak and fragile.

We emphasize the recreation area

In addition to walls with niches and windows that allow a child or an elderly person to allocate his living space, a similar technique is used to isolate the recreation area and its holy of holies - sleeping places, an aquarium or a TV. In the latter case, drywall niches in the walls are generally out of competition due to the wide distribution of flat plasma or liquid crystal models.

For your information! An interesting feature of drywall niches and walls is their relative facelessness.

An empty structure has nothing of its own until objects or things appear in it. Further, the drywall product turns into a frame or wrapper, skillfully emphasizing the style and character of the main subject.

A furniture stand or cabinet already has its own style and design, often with a modern TV it looks archaic or bad taste.

How to make a niche in a drywall wall

A high level of decor requires a perfectly flat wall surface and the right direction of lighting or additional lighting. It is not difficult if you try to take into account all the requirements for building a niche in a drywall wall.

Working with drywall in the manufacture of walls, partitions, arches or niches does not require exorbitant qualifications of the worker, only accuracy and an accurate understanding of the goal are needed.

If the plane of a decorative plasterboard wall or its elements is provided by factory-made flat planes of the material, then you have to break your head in matters of lighting direction. Often, to ensure the desired effect, it is necessary to use two types of lighting. Applying solar flux or monochrome light to warm or cold color of the room, you can achieve a visual increase in the space of the room during the day and the opposite effect in the evening or at night.

Niche - TV stand

The reasons for the popularity of drywall niches for the TV were mentioned above, consider the most popular option for making a large decorative structure for a widescreen TV.

How to properly position a niche for a TV

All that needs to be done for future comfortable viewing of programs at any time of the day is to take into account the recommendations of TV manufacturers and the wishes of family members:

• The design of the niche must be securely fastened to the wall with support on the floor, the main support shelf is calculated and reinforced based on a double margin of safety;
• In the niche itself, there should be plasterboard side walls of the rack, shading the TV screen from direct sunlight or bright lights;
• Drywall conducts sound perfectly, which means that in order not to disturb the rest of the family, it is necessary to use sound insulation made of mineral wool or polystyrene, we also place external speakers or speakers in niches with sound insulation.

We assemble and fix the niche frame

We assemble the main frame of the niche-portal from a galvanized profile on a prepared wall and a wall sheathed with plasterboard. Under the niche, it is better to choose a 15 mm GKL sheet, since the dimensions of the individual elements of the niche are large enough and are calculated for the weight of the TV up to 10 kg in weight.

According to the markup, we sew the main supporting structures of the profile onto the wall and ceiling.

Arches and roundings of the wall can be made of flexible metal inserts, or cuts can be made on the profile of one of the shelves. This will allow you to bend the profile along the required arc. You will have to sew rounded elements with the help of small pieces of drywall sheet.

The most difficult part will be to cut and precisely install the symmetrical rounded posts so that they exactly match the curvature of the left and right sides of the structure. After mounting the vertical racks, we attach the frame of the main shelf and auxiliary drywall niches to the wall for speakers and small items.

We lay soundproofing in the cavity of the walls and sew up the outer surface with a thin-walled 8 mm sheet.

Puttying and finishing the surface of drywall

Finishing work, as a rule, is no different from standard work with drywall products, but in places where large gaps have formed between sheets of drywall, it is better to use a perforated plastic or aluminum corner to reinforce the putty layer.

We clean the wall in two stages with the removal of the rough layer and polishing in the final version with a fine mesh. After completion of the mechanical treatment, the wall is primed with a double layer for painting in the most suitable color.