Features of reproduction of thuja cuttings in the fall. Thuja - a tree of life - tips for growing and caring for Propagation of thuja teddy cuttings

The evergreen beauty has many fans around the world. Many owners of summer cottages and household plots are happy to decorate their territories with this culture, and therefore the issue of shrub propagation does not lose its relevance.

There are only 2 ways to propagate thuja: seeds and cuttings. The seed method is not so popular and is used less often, because cultivation is delayed for several years. But the latter option is very common, since, according to many gardeners, it is much better and more convenient. Consider the features of this method.

Video: thuja propagation methods

When to cut thuja: optimal timing

On the question of when it is better to propagate thuja cuttings at home: in spring, summer, autumn or winter, experts differ a little. Someone claims that it is better to do it in winter, and someone says that the ideal time is in the spring.

But despite such disagreements, propagation of thuja by cuttings in the summer is the most optimal option. The thing is that the event held in the summer allows the branches of the shrub to fill up with strength, adapt and take root normally for transplanting to a permanent place next season.

Important! Thuja should be propagated at home by cuttings in the summer when the growth of the shoots has stopped.

How to cut thuja cuttings

For reproduction, it is necessary to choose a healthy shrub, you can not take branches from a sick and weak tree. It is also not recommended to take cuttings from side shoots, as it is possible to get a twisted seedling.

For reproduction of thuja, a normally developed skeletal branch in the upper part of the shrub is ideal. For the cutting, you should choose two- or three-year-old lignified growths about 10-15 centimeters long, which are located at the ends of the shoots.

The stalk must be sharply torn off along with a small piece of wood with last year's bark, which is called the "heel" (it is recommended to tear it off from top to bottom). Thanks to the “heel”, the twig will be able to take root faster, as it contains useful substances that the plant has managed to accumulate. When peeling the bark on the handle, it is necessary to slightly clean this place with a knife.

In the photo, a correctly cut thuja stalk:

Advice! With strong lignification, you can use a secateurs, it will help to carefully remove the material.

How to prepare thuja cuttings for rooting

First of all, excess needles should be removed from the handle in order to prevent decay. To do this, it is necessary to cut the branches from the lower part and lightly strip the bark. And with an abundance of branches, you can make the needles a little shorter in other places.

After these manipulations, the twigs must be placed for about 12 hours in a solution of the drug to stimulate growth and root formation (for example, Epin, Kornevin preparations).

Note! Storage of cuttings is not allowed, as they may deteriorate and become unsuitable for planting. But if for some reason you do not have the opportunity to root, then you can wrap the branches with a damp cloth and leave them in a dark, cool place.

Soil preparation

As a soil for rooting cuttings, it is optimal to use light soil with good drainage properties or ordinary river sand (the main thing is that it is clean). If the first option is more suitable for you, then you can prepare the substrate yourself: you should mix sand, peat, and leafy soil in equal proportions.

For seating it is necessary to use containers with a small depth. They must have aeration and drainage holes. Containers or seedling cassettes are ideal for this purpose.

When using sand, it must be boiled for five minutes before use and be sure to cool. When using both sand and soil mixtures, it is necessary to add a three percent solution of potassium permanganate and mix.

After that, place expanded clay or other small stones on the bottom of the container. Now you can shift the soil or sand into prepared containers.

Direct rooting process

When rooting thuja cuttings, you must follow the following step-by-step instructions:

1. Lightly treat the roots of the cutting in the Kornevin preparation.
2. Insert them into the ground at an angle of 45 degrees to a depth of about one and a half or two centimeters. The optimal distance between the cuttings is five centimeters.
3. Then you should slightly compact and water the plant.
4. Cover the containers with foil or a plastic bag. You can also place a branch in a plastic cup and cover with the same cup on top.

Note! Some time after the event, new shoots will begin to appear on the plant. This means that rooting was successful.

Video: rooting thuja cuttings in a cup.

non-standardmethod of rooting cuttings in potatoes

Some gardeners also practice another equally interesting way of propagating thuja by cuttings - rooting in potatoes. Potato nutrients and starch have a beneficial effect on the twig, helping to take root successfully.

To do this, take a few healthy, fresh potatoes, wash them, remove the eyes, then make a hole about 4 cm long in them with a nail. After that, it is necessary to place the thuja stalk in the hole of the potato. Fill the wooden crates with fertile soil and place the potatoes in the soil. Cover the thuja in the potato with a plastic bottle with a cut bottom. Then you can unscrew the cap of the bottle and water.

There is also a method of rooting in a jar of water, but it is not very productive, it is better to do this in a substrate.

How to care for planted thuja cuttings before planting in a permanent place

The optimum temperature of the content is + 18-23 degrees. Humidity should be high - about 70-75%. Storage should be carried out in a warm place, which is exposed to diffused light (direct rays are dangerous!). And the greenhouse itself must be regularly ventilated.

Water the plant as carefully as possible to avoid exposing the “heel” and getting moisture on the needles. For delicate watering, a spray bottle is ideal. Water only when the top layer of soil or sand dries out and remember that an abundance of moisture can adversely affect the plant.

In autumn, after successful rooting, planting should be done in larger flowerpots or in open ground on a special bed (if weather permits). If you want to plant in flowerpots, then you should prepare a nutrient substrate: just mix garden soil with high-moor peat. After that, be sure to regularly water, feed, eliminate weeds near the coniferous plant.

Video: rooted cuttings of thuja smaragd four months after planting open ground.

Important! In late canopy around November, small thuja should be able to endure the winter cold normally. For this purpose, sawdust, leaves, spruce branches are perfect.

After the winter cold, the covering material can be removed. But you need to do this only if you are sure that the frosts will not return. Continue to do the care that was carried out for the thuja cuttings earlier.

If you dream of decorating your site with lush and luxurious shrubs, then the method of propagating thuja with cuttings is perfect for you. It can be done independently at home without any problems and difficulties. This method is not expensive and economical, and if done correctly, gives an excellent result. Good luck in breeding and growing thuja!

Video: how to properly propagate thuja cuttings at home

In contact with

A beautiful tree or shrub will become a decoration of the local area or garden plot. An excellent choice for such a case can be thuja. This evergreen ornamental plant is native to East Asia, it is distinguished by a dense crown and unpretentious care. Due to the ease of cutting branches from thuja, you can create graceful natural forms. Therefore, people who breed plants on their own will be interested to know what thuja reproduction is at home.

Reproduction of thuja at home by seeds

Seed-produced offspring are more hardy than plants propagated by cuttings. However, the process of growing a seedling is quite long - from two to six years. For planting, only fresh seeds are required, which ripen in cones. After collection, they are placed in a warm, dark place, and after two or three days they open. A prerequisite will be their placement in wet sand. After a couple of days, plant the seeds in large pots or boxes with a specially prepared mixture: for this, they take part of peat and sifted sand, three parts of soddy land. Then the containers are transferred to the basement and left for three months. After that, the boxes (pots) are taken out and left in a warm place, without excess sunlight. After the shoots appear, you should gradually accustom the plant to fresh air and sunlight, as shown in this photo.

The plant should be transplanted at the beginning of summer, after fertilizing the planting site with a small amount of ash, peat and sand. In some cases, the collected seeds are left in the ground for the winter, so that they lie under the snow (natural stratification). And then they are sown to a depth of 0.5 cm, sprinkled with coniferous sawdust. It is necessary to provide the plant with protection from sunlight, and cover the shoots with special shields. It is possible to carry out bait with a weak solution of slurry (one part of manure to 20 parts of water). In about a year and a half, it will be possible to determine the type of growing plant - columnar or spherical.

How to propagate thuja at home by cuttings

A better known method of propagating thuja at home is by separating a cutting (cutting). You will need a lignified shoot with a length of 20 cm or more, it is better to cut it in late April, early May, in extreme cases - the second half of June. The stalk is separated by cutting (it will be good if part of the wood of the donor plant remains on it), after which the bottom of the process is cleaned of needles and immersed in water for 2 hours. The soil mixture must be made from equal parts of peat, soddy soil and river sand. In order to disinfect the substrate, it must be treated with potassium permanganate. The harvested shoot is planted to a depth of 3-4 cm.

You should also provide appropriate external conditions for the germination of the cuttings. The greenhouse should have sufficient humidity (70%), be sunny - so use a transparent greenhouse cap. Don't forget to ventilate the area. To maintain the required level of humidity, use spraying.

In more detail with the described methods of breeding thuja, you can find in the following video:

Now you know how thuja reproduces at home, and this will not cause any particular difficulties. By following these tips, you can grow a wonderful ornamental plant, implement your innovative ideas for decorating a garden and a house adjoining area. And then the thuja will delight you with its evergreen crown for many years.

Thuja in our country does not occur in the natural environment. The plant was brought to Russia from East Asia, and some varieties from the American continent. These evergreen conifers are not capricious at all, and you can grow thuja on your site without any problems. And today we will talk about how to plant a plant and care for it. We will pay special attention to the question of how to propagate thuja.

Tui reproduction

How to propagate thuja? In general, the propagation of this plant is not a very complicated procedure. There are two main ways: shifts and vegetatively.

With seed propagation of a plant, high-quality material is obtained. But it is impossible to be sure that young plants will repeat all the maternal signs. Only some types of thuja during seed propagation can become clones of a donor plant, but for the most part hybrids grow. That is why the reproduction of thuja in a vegetative way is considered the most successful way.

seed propagation

To do this, you will need fresh seeds that were collected in the autumn, since they lose their germination capacity a year after collection. At the beginning of winter, they are planted in boxes using a special planting mixture:

• ¾ - turf (leaf) land;
• ¼ - sifted sand;
• ¼ - peat.

Then the box is transferred to the basement for about 3 months. After this period, the seeds are taken out into the light and left in a warm place, where they germinate. Seedlings need to be shaded.

Young growth develops very quickly, but before planting it must be gradually “accustomed” to sunlight and air. Tui tolerate landing well. The optimal period for this is the beginning of summer.

If the root system was damaged during planting, then this is not a problem. Such a landing defect will help in the future to obtain a denser bush shape.

For vegetative propagation, several methods are used.

Division

This is the most preferred way to propagate thuja if you plan to plant multi-stem varieties. In order to get a good root system, thuja is planted to a depth of at least 15 centimeters and spud. This is ideal for reproduction in the summer, then the roots will form by autumn. And the plant can be dug up, divided into seedlings and planted.

Horizontal layers

How to propagate thuja in this case? The main disadvantage of this method is that the resulting plants cannot be guaranteed to repeat the appearance of the donor plant. Seedlings rooted in this way may turn out to be somewhat crooked. But with proper care for several years, they get the desired shape. To get a horizontal layer, the parent branch is bent to the ground and dug in. Rooting will take at least a year.

cuttings

How to propagate thuja cuttings? Plant cuttings can be started as early as the end of April, since it is necessary to obtain planting material before the buds swell. If for some reason it was not possible to get cuttings in the spring, then another favorable period is the second half of June. At this time, the plant stops growing shoots. In order for the plant to take root successfully, it is better to cut two- or three-year-old shoots, but younger branches can also be used.

Thuya needs to be well rooted. In order for the plant to be able to go through this stage without problems, there are several rules.

1. The length of the handle should not be more than 20 centimeters.
2. At its base should remain a "heel". This is the name of the part of the wood of the donor plant. Therefore, if the bark remains on the handle, it is not necessary to remove it.
3. Be sure to treat the planting material with a solution of heteroauxin.

Thuja: planting and care

Thuja feels good almost anywhere, but in full shade the crown of the plant often becomes more rare. It also does not impose special requirements on the composition of the soil. It can be peaty soil, and soil with clay content, and even dry sandy loam. The main thing is that the earth is well aerated. If you plan to plant a tree on heavy, waterlogged soils, then it is necessary to drain the earth. When transplanting thuja, be sure to ensure that the earthen ball is not broken. Young plants are much easier to tolerate planting.

landing pit

In order for the plant to be able to fully develop, the planting pit must be at least 70 centimeters deep. This figure depends on the size of the earthy coma and the height of the adult plant.

Sod land, peat and sand are used as a soil mixture in a ratio of 2: 1: 1. It is also necessary to add 100 grams of nitroammophoska. The root neck should not be buried, but located at ground level.

Distance between plants

When group planting between individual thujas, a distance of three to five meters should be maintained. It depends on the size of the crown of an adult specimen.

top dressing

Feed the trees in the spring. For this, full complex fertilizers are used. A good option is Kemira-station wagon. Consumption rate - 50-60 grams per square meter.

If full fertilizer was applied directly at planting, then the next top dressing can be carried out after 2 years.

Watering

Thanks to the lush crown, the thuja evaporates a huge amount of moisture. It is absolutely impossible to allow the earth to dry out at the base of the plant. Watering must be carried out even in the autumn.

In the first month of plant life, a seedling is watered in a permanent place once every 7 days at the rate of 10-50 liters per plant. The volume of water depends on the size of the thuja. Useful for trees and sprinkling.

loosening

The kidney in the trunk circle must be loosened constantly. But remember that the thuja has a superficial root system, so the depth when loosening is no more than 10 centimeters.

The base of a young thuja is recommended to be covered with mulch. It can be peat, tree bark, wood chips or compost. This technique helps protect the root system of the plant from excessive heating and drying out in the summer, and from freezing in winter.

In the first few years, trees need to be covered to protect the plant from spring and winter burns. Adult specimens are characterized by good winter hardiness. The only thing that can be recommended is to tighten the crown of high thujas for the winter period with twine. Then they are guaranteed not to be broken by heavy wet snow.

Thuja, the care of which, as you can see, is not too burdensome, will be an excellent decoration for your garden.

Thuja is an evergreen tree from the cypress family, which is very often used to decorate parks and home gardens.

Breeding thuja is a difficult task that requires a lot of time and diligence.

You can grow thuja from a seed, but at home it is best to grow thuja vegetatively, that is, cuttings from a twig.

Seed propagation is used much less frequently, since only 10% out of 100 manage to preserve the traits of the variety in young plants. In addition, shrubs bred from seed develop more slowly than plants obtained by cuttings.

Shank processing

For breeding thuja cuttings, you will need the following materials:

• thuja twigs;
• pots or boxes;
• water jars;
• priming;
• pebbles;
• sand;
• fertilizers;
• sackcloth;
• polyethylene;
• wire.

It is necessary to cut off the cuttings of the thuja in the spring, in March or April, after the winter cold. The location of the shoot that you will cut is also important.

The lateral branches of the thuja (which grow horizontally) at the age of 7 years take root much better than the branches from the top, which practically do not take root.

Cut branches must be at least 12 centimeters long, and their diameter must be up to one centimeter. Next, you need to make a cut at an angle of 45 degrees, make several cuts - to speed up the formation of roots - and scrape off the bark at the base of each cut.

Needles must be left only at the end of the branch, and the rest should be removed. The resulting cuttings must be placed in a jar of water or a mixture of root stimulants so that they do not dry out. Cuttings in this way must be kept for 12 hours before planting in the ground.

Expert advice: young side shoots often do not exceed 15 centimeters in length, so they can be used for cuttings without being divided into several parts.

Primary landing

Thuja is a very whimsical plant, and ordinary soil does not suit her.

In order for the cuttings to be planted successfully and the plants to take root, the soil must be high in coarse sand, peat and soddy soil.

At the bottom of the pot, in which the cuttings will be planted, small pebbles are placed, which are sprinkled with a thin layer of river sand.

The earth needs to be compacted a little, but not much, so as not to get hard, non-breathing soil. For young roots, it is soft earth that is favorable.

Specialist's note: thuja loves humidity, so before you start cuttings, the humidity in the room in which the seedlings will be located must be increased to 75%.

You also need to take care of a sufficient amount of light. In addition, it is also not necessary to fill the pot completely with soil, leave 5 centimeters empty.

Wooden sticks make depressions in the ground. Try to place the holes at a distance of at least 3 centimeters from each other and leave at least 10 centimeters between the rows and indents from the edges of the pot.

Before planting the cutting, taking it out of the water, you need to shake it with a branch to get rid of excess moisture. Gently lower the cutting into the hole at an angle of 40–45 degrees, immerse it in the ground two to three centimeters and sprinkle it with earth on top, tamping it around the leg, and then water it properly.

Next, you need wire and polyethylene. The wire is needed to support the plastic bags with which to cover the pot, to create a greenhouse atmosphere.

It bends in the form of an elongated horseshoe and sticks into the ground with sharp antennae. Instead of wire, you can also use old hangers that are no longer needed on the farm.

It is better to choose transparent bags and polyethylene so that the young shoots have enough light. The resulting greenhouse must be covered with burlap.

Seedlings should be watered daily so that the earth does not dry out and the cuttings can take root. But at the same time, try not to flood the plants. And in order not to start the process of decay in a warm and humid room, it must also be ventilated every day.

Transplantation in open ground

In the fall, when the cuttings not only successfully took root, but also gave rise to growth, the greenhouses must be opened, the plants covered with spruce branches, sawdust or leaves, and so leave the young thuja for the winter.

With the advent of spring, shelters are removed and standard spring care is carried out: all weeds are removed, and thuja are fertilized.

You can also carry out potassium permanganate - pour thuja with a saturated raspberry color with a solution of manganese to get rid of pests. Then you can start transplanting - by this time a year should have passed since the start of breeding.

Loamy fertile soils are perfect for permanent residence of thuja. During the first wintering, thuja should be wrapped with spruce branches or leaves. In such a simple way, you can grow a thuja from a cutting, and it doesn’t matter what you choose: or the most common - western.

Watch the video in which the specialist explains in detail how to properly propagate thuja with cuttings:

Not everyone knows how to propagate thuja at home. But even without being a professional gardener, you can grow thuja on your own.

Thuja grows in America and Asia. From there it was brought to Europe. In Greek, thuja means incense, thanks to the pleasant smell that is formed when the fragrant rocks of this evergreen are burned.

Unlike other conifers, which have sharp needles, thuja branches consist of flat scales overlapping each other. This is an incredibly beautiful tree that can decorate any garden. Inhaling the smell of thuja has a beneficial effect on the body, since the phytoncides that the plant secretes can strengthen the immune system and improve sleep. Thuja is able to purify the air and give an indescribable aroma.

Tui reproduction

Thuja reproduces in several ways. The first is the propagation of thuja seeds. If you start propagating thuja by planting seeds, you can already get a large number of seedlings in a few years. In the first year they grow up to 7 cm in height. After two years, they will already reach 0.5 m. And in subsequent years they will grow by another 13 cm per year. In late summer or early autumn, thuja seeds begin to ripen. Until the buds are fully open, it's time to collect the seeds.

In order to dry the seeds well, you need to decompose them in a dry place without drafts and dampness. After the cones are completely dry, they should fully open. After that, the seeds calmly spill out. Then the seeds should be immediately lowered into the ground. If this is not done, then after a few months their germination will decrease.

The most suitable time for breeding and sowing is autumn. It is at this time of the year that there are all suitable conditions for germination. In autumn, seedlings germinate faster than in spring, and endure the winter season more easily. You can plant seeds directly in the soil in the garden, or you can sow in a wooden box. Thus, it is much more convenient to care for future seedlings. If desired, the box can always be rearranged to a more favorable place.

In order to plant seeds in a specially prepared box, you first need to prepare the soil. To do this, you need to take two parts of peat, one earth and half sand. Next, you should press down the soil well, which should not reach the edges of the box. Then you need to draw grooves every 5 cm and expand them a little. Next, you should carefully place the seeds in the grooves and cover them with a thin layer of prepared soil. Gently water the soil, making sure that the grains do not float. If the seeds floated, it is necessary to sprinkle with a small amount of earth. If there is enough moisture in the air, the soil does not need to be irrigated.

Propagation of thuja cuttings

Reproduction of thuja cuttings is also possible. It is generally accepted that thuja from cuttings is much more hardy than those grown from seeds. When choosing branches, preference should be given to not very young and at the same time not very old branches. It is best to take those branches that are located in the very middle. This will be just what is needed: they are already strong enough, but at the same time they have not yet become rigid. In order to properly cut a branch, you need to take it almost at the very base and pull it down with force. You can use a knife to carefully cut the branch. At the place of the cut, a so-called heel should form, the branch of which must be planted in the ground. The longer the heel, the better the seedling will take root. Then you should remove unnecessary lateral processes.

Planting can be done in summer or autumn.

Thuja cuttings in autumn are carried out as follows. In a planting pot, you need to mix the earth with peat, taking them in equal quantities. Plant the cutting in the ground to a depth of about 2 cm at an angle of 60 °. After that, sprinkle sand around the seedling and press it well with your fingers. The remaining leaves should not come into contact with peat. Carefully pour the thuja and put a glass jar on top or use cling film to build a greenhouse out of it. The jar must be well washed to be transparent. Next, for a pot with an escape, you should choose the optimal conditions. You need to put it in a place where the tree will have enough light, as well as enough heat. The temperature in the room should be 22-23°C, and the humidity should not reach 70%. If you do not adhere to such parameters, the shoot may rot. The seedling itself should not be heavily flooded with water, it will be enough to sprinkle the soil from the spray gun.

After new shoots begin to appear on the handle, this will mean that the seedling has taken root. But it is not yet necessary to take the breeding cuttings outside. Open the greenhouse as often as possible so that the tree can breathe fresh air. Gradually, it is necessary to increase the interval of time spent by the thuja without a greenhouse, it should get used to the cool air. And only then the shoot of a coniferous tree can be planted in the open air in the ground.

It is good to propagate thuja cuttings in the summer. Plucked thuja branches should be cleaned of unnecessary needles from below and soaked for about a day (or just overnight) in a solution that stimulates growth. You can use the Kornevin solution, which has instructions for use.

In the box in which the cutting will grow, pre-make many small holes so that the roots have better access to oxygen. Under the bottom of the box, it is best to substitute a couple of bricks around the edges. The next step is to prepare the sand. Fine river sand must be boiled. To do this, you need to pour the floor of a bucket of sand into an old iron container and fill it with plenty of water. The liquid should cover the sand. Next, it should be put on gas, let it boil and reduce the fire. Hold for another 5-6 minutes and turn off the gas. For safety reasons, allow the contents to cool and slowly drain the water.

Transfer the sand to an old wicker shopping bag so that excess moisture is added to the glass. Then pour the sand into a large container, add about half a glass of an antiseptic, for example, a solution of potassium permanganate. This mixture should be thoroughly mixed.

Put drainage into the prepared planting box, and then pour sand. Stick the cuttings into the ground to a depth of 1 cm and trample around. Carefully water the shoot of the thuja. Next, the box should be removed away from direct sunlight. Within two months, seedlings should be sprinkled with water. If the summer is hot, you need to water more often, because the sand dries quickly. In autumn, seedlings need to be transplanted into a pot. This must be done carefully so as not to damage the roots. Thuja can already be planted in the garden.

The method of propagation by cuttings in a jar of water is also applicable to coniferous trees. This method consists in the fact that the cut branches of the thuja are placed in a jar of water for a couple of weeks, periodically changing the liquid. When the thuja takes root, it can be planted in the ground.

Features of reproduction of thuja varieties

Brabant is a common variety of western arborvitae. In itself, this is not a capricious cute tree that can decorate any landscape. It loves light and from its lack can lose the saturation of the green hue. But this coniferous beauty cannot stand the scorching sun either. Therefore, the most optimal place would be partial shade. This tree can grow on any soil, but the earth should not be dry and lifeless. In order to get a bright green thuja, the earth needs to be fertilized.

In order to plant thuja Brabant seeds in spring, they must first be strengthened and enriched with moisture. To do this, in the winter season, the seeds need to be buried in the snow. With the onset of spring, they can be safely planted in the garden.

To do this, you need to make several grooves in the soil and insert seeds into them. From above, the soil must be covered with earth, last year's leaves or sawdust. Further, the earth needs to be watered with manure (about 1 kg per 20 liters of water). After the appearance of the first shoots, the thuja needs to be watered further, and it is also necessary to protect the plant from the sun.

Propagation of thuja by cuttings has one advantage over other varieties: it grows the fastest. Plucked branches for grafting should be lowered into a solution of heteroauxilin for a couple of minutes. A solution of potassium permanganate is also suitable. Thus, the plants are disinfected. Further, the seedlings can be lowered into the soil in the greenhouse.

The soil should consist of peat, earth and sand, taken in equal quantities. It is necessary to deepen the cutting by no more than 3 cm. They should be planted at a distance of half a meter or more from each other. Such a distance is necessary for trees so that when they grow, they would not interfere with each other.
To plant one tree, it is enough to dig a hole, and for a large number of arborvitae, you need a trench.

additional information

You need to start fertilizing the soil from the very planting of the thuja.

Thuya Smaragd is a very slow growing variety. But on the other hand, it has frost and wind resistance. In order to cut thuja Smaragd, you need moist fertile land.

Thuja Danica is not demanding on the type of soil and does not need good moisture. But still prefers fertile loam.

Globular thuja in the process of growth can change the color of the crown. It is not very demanding on the nature of the soil, but loves bright lighting. It calmly tolerates the smoke and dustiness of the city, withstands frost, but the young plant needs to be wrapped up for the winter. When cutting such a thuja, you should not get carried away so as not to weaken the tree. The first time the plant needs to be trimmed after the third year of life, carefully removing the ends so that the tree becomes more magnificent. Thuja should be watered regularly so that its crown does not thin out. Propagation by cuttings is also possible. Cut shoots of thuja for planting must first be lowered into water, and then placed in moist soil in a greenhouse with sufficient lighting, and do not forget to water it.

Thuja tolerates frost well, is not capricious and does not require special care. She likes coolness and does not like complete darkness. The soil in which thuja grows must be fertilized and irrigated. In winter, snow should be swept over the tree so as not to damage its branches. In order for the thuja to become thicker, it needs to be trimmed periodically, giving the most unexpected shape.