home

Arrangement of a bathroom in a private house. Bathroom in a private house: beautiful arrangement, the best design and competent layout (105 photos)

To make a bathroom in a wooden house is within the power of any owner of a country house. To realize their plans for the arrangement is quite within the power of each person. This is where we spend most of our lives. But in order to do everything qualitatively, it is necessary to make every effort and carefully study the technology of construction and decoration.

An important constituent element when decorating a bathroom in a wooden house is a careful consideration of the design. The state of not one room, but the entire country house depends on how well the project will be done. Properly laid sewerage and drainage systems will not allow moisture to spread over the surfaces and save the premises from possible deformation. In addition, the external interior and bathroom amenities are of great importance for all family members.

Properly selected interior, material and equipment will help to realize the most daring ideas. It is necessary to start the arrangement of a room in a wooden house with waterproofing. Because of how well the protection against moisture is selected, further operation will occur.

The design of the bathroom can be planted by placing pots of flowers throughout the room.

Constant humidity and temperature changes can destroy the composition of even the hardest wood species, not to mention other materials. Therefore, it is desirable to prevent all the consequences of incorrect processing at the very beginning than to deal with troubles after the completion of all arrangement work.

Improperly installed waterproofing or its absence will lead to fungus infection of all surfaces of a wooden house and the development of mold, which can move to other surfaces, and the finish itself will begin to quickly collapse.

The flooring in the bathroom is made of ceramic tiles.

Modern bathroom design with bathtub lighting

Floor laying and its features

To protect surfaces from moisture, it is better to approach comprehensively. Careful layering will not only protect the surfaces from unwanted moisture, but will also help reinforce the floor structure - this is necessary because the equipment installed in the bathroom has more weight than ordinary furniture.

Accordingly, the bath will be filled with water, which means that the mass of the load will increase. Therefore, the design of the floor structure must be carefully considered.

To prepare the base for the future bathroom, we divide the space between the lags:

Lay a special waterproofing film as the first layer. Spread a mixture of gravel and sand on it and compact it well. The height of the layer should be about 15-20 centimeters.
Lay the next layer to the height of the upper beams with expanded clay, also carefully tamp and fill with liquid concrete or cement. The result should be something like a two-layer cake. Wait for everything to dry before moving on to the next step.
Install moisture-resistant plywood on top of the beams and secure it. Choose a material with a thickness of approximately 15-50 mm. Apply a waterproofing film to the plywood layer and leave an additional 10-15 cm overlap on the walls to provide protection against leakage in the sides between the wall and the floor.
Pour a special mixture intended for floor screed onto the laid insulation. Pre-arrange the beacons, after drying they can be removed and discarded;
For convenience, you can make a slope towards the sewer or leave and connect the hole in the floor with the drain pipe. Additionally, equip the hole with a grate or cork - this is necessary so that small objects do not get into the holes, and a closed cork will become a barrier to unpleasant odors;
The resulting screed is treated with a grinder and a waterproofing solution.

The choice of floor surface depends on the preferences of the owner. Many choose tiles because the laying process is not complicated and it will not be difficult for an ordinary person to lay. An alternative to a tiled surface can be a moisture-resistant laminate or linoleum.

A wooden bathtub will become the main highlight of the bathroom interior

Bathroom design made of light wood

The floor and shower are finished with mosaic tiles in different colors.

Building features

When laying an additional top coat, contact the professionals. They will help to install the floor quickly and efficiently.

Interior solutions

To give the house its own special style, you can decorate the bathroom room with a tree. Larch, aspen, teak look good. The floor installed and treated with antifungal agents can also be laid out with mosaics or porcelain stoneware.

The floor covering of their adhesive cork with a layer of shiny varnish applied on top looks very nice.

Bathroom ventilation in a wooden house

The functionality of the room and the temperature regime depend on how correctly the system is installed. The ventilation pipe outlet installation is usually placed in the upper part of one of the corners of the wall and is led out through the ventilation pipe. You can connect it to an air duct, and then the flows will go out into a pipe in the attic or roof.

For additional supply of fresh air, a fan can be installed. It will help dry the room quickly.

In addition to installing an exhaust system in a wooden house, it is necessary to provide fresh air. For this purpose, a small gap is additionally installed between the outer threshold and the lower part of the door (approximately 15-20 mm). An improperly installed air vent system can cause condensation to accumulate on all surfaces, causing the material used in the decoration to gradually deteriorate and swell, which leads to the appearance of fungi and bacteria.

A chandelier in the interior of a bathroom in a wooden house will create a special atmosphere

Ceiling and walls - choose the material

Finishing surfaces that fit into the interior of a bathroom in a wooden house are various models of panels and drywall. In terms of their qualities, they are not inferior to other materials, but they look beautiful and are much cheaper than tiles or stretch fabrics.

Lighting for the ceiling of the bathroom consists of several lamps connected to each other. They are mounted in a canvas attached to the base, and help to evenly distribute the light rays inside the room.

If the room is large, you can hang a chandelier in the central part and hang several sconces (small lamps) separately in places where light does not penetrate. This design will give the bathroom comfort, warmth and an atmosphere of mystery.

Dark wood combined with white in the interior of the bathroom looks very beautiful.

The bath is made in the form of a barrel

Wooden bathroom design with shower

For wall decoration, in addition to high-quality waterproofing, wood materials are suitable. They fit perfectly into the design of the room and create a unified style. In addition to wooden panels, tiles are also widely used. It is a versatile finishing material and has long occupied a leading position among bathroom coatings. The main qualities and advantages when using tiles are:

durability;
practicality;
big choice;
ease of use and care.

We install plumbing

Before you start installing the equipment, make a preliminary plan of the room in which places the plumbing will be located. If the area allows, you can install a bath in the middle of the room - it will look spectacular and beneficial in relation to other equipment.

Such an arrangement requires preliminary preparation for strengthening the structure and capital strengthening of the floor. This is necessary in order to reduce the increasing loads on the logs and beams.

Dark wood in the interior of the bathroom looks very unusual and beautiful.

Wood in the interior of the bathroom will harmoniously complement the design

If the floor has a regular base, place the equipment along the walls. Choose sinks preferably of medium size. If there are more than three people in the family, install two models.

If the walls of the bathroom are decorated in a wooden style, you can finish the plumbing with a similar material. To do this, use special coatings with impregnating substances that protect the finishing surfaces from moisture and fungus. If you install large tubs on separate legs or a jacuzzi in the middle of a room that has extra space, then they will look very impressive and stylish.

The design of the bathroom is designed in one color scheme.

The flooring in the bathroom is made of porcelain tiles.

Porcelain tiles combined with wood look very beautiful

How to choose furniture

In private houses, compared to the area of small apartments, the footage of the bathroom allows you to install sanitary equipment, as well as cabinets and open shelves for linen. The open environment allows you to beautifully put together various everyday things:

towels;
house dressing gowns;
hair dryers;
brushes;
cosmetics;
household chemicals.

When choosing furniture for design, pay attention to non-standard things. For small children, stable chairs or portable steps are suitable so that they can safely reach the sink. Modern manufacturers offer a large selection of different models for price and quality.

Finishing the floor in the bathroom can be made of porcelain tiles

Wall decoration in the bathroom is made of ceramic tiles in combination with wood

The mirror is an important attribute in the bathroom. Traditionally, it is customary to hang it above the sink in a wooden house, but you can hang it wherever you want. Installed in full height, it will make your interior elegant and emphasize its individuality.

In addition, you need to take care of the little things. The following details will fit the design well:

boxes for storing various items (household chemicals, detergents);
hooks for clothes and bathrobes:
shelves and racks for bath accessories;
laundry baskets;
heated towel rail.

Little things and details thought out in advance will make your stay comfortable and enjoyable.

The wood in the interior of the bathroom looks amazing

Wood bathroom design looks very nice

The wood and white color in the interior of the bathroom will be very beautifully combined.

Room styles

Country

Most often, country houses are decorated in this Provencal style. Surfaces of walls, floors and ceilings are wooden. Windows (if any) with large checkered curtains or small flowers. Bathrobes and towels are also kept in the same range. In addition, you can install dark wood shelves, lay a wool rug and add a holder for soap and toothbrushes, as well as other accessories on the subject.

Classic

This style is characterized by light colors. The walls and floor are usually tiled, the ceiling is stretched. Exquisite sanitary ware will perfectly fit into such a bathroom design. Furniture, bathroom accessories, linen will suit a light shade.

Bathroom wall decoration made of wood

Bathroom design in dark wood

Empire and modern

For these styles, bathrooms with a large area and where significant amounts of money can be spent on equipment and materials are suitable. Here it will be typical to use gilded parts of fittings, sculptural models in the form of angels and nymphs. Large mirrors, expensive chandeliers and floor lamps. The bath is usually placed in the central part on separate raised legs. This style is characterized by a combination of gold and white - this design gives the design of the bathroom a chic look.

Wood as a building material has a number of advantages that directly affect a person. Attractive appearance, the smell of wood and its texture create a unique interior that brings positive emotions to the residents of such houses. At the same time, the wooden ceiling and walls are exposed to moisture, so finishing a bathroom in a wooden house requires a special approach. Here, the waterproofing device and the use of moisture-resistant materials come to the fore.

Room waterproofing

Waterproofing is at the core of a bathroom renovation, whether or not additional wall cladding materials are used. The bathroom should limit the humidity zone to its territory. Wooden walls, the ceiling should be treated with special solutions against moisture, fungus and mold. In order to equip waterproofing, two layers of film should be used, which must be distributed evenly over the entire floor area with a transition to the walls at least with a rise of 20 cm. When installing heavy plumbing units, it is important to strengthen the load-bearing elements of the floor structure. They must withstand a load of at least 460 kg/m2.

In the early stages of construction and repair, such work can be done by hand. To do this, it is necessary to reduce the distance between the beams, while increasing their cross section. The floor level of the bathroom must be made 20-25 cm lower than the floor covering of the rest of the rooms. After the floor is arranged in the final version, the level will rise just to this height.

A bathroom in a wooden house requires an integrated approach. In order to equip it, you need to carefully perform the necessary work at several important stages.

Install an effective ventilation system.
Establish a reliable sewerage and drainage system.
Make high-quality waterproofing with your own hands.
Install plumbing.
Sheathe the walls with finishing materials.

The arrangement of the drainage system is of the utmost importance, since a wooden building gives a noticeable shrinkage. It is important to use materials that are resistant to deformation. Modern technologies make it easy to solve such problems even when building a house with your own hands. The plastic pipeline should be fixed with clips, between which rubber gaskets must be installed. In addition, special insulating materials will help protect the sewer from frost. The interior, design of the bathroom must be thought out in advance and the sanitary unit should be equipped in the most efficient way.

According to the advice of experts, the base of the floor covering should be a concrete screed. This will allow you to choose different flooring options: from tiles to warm floors on a wooden base. The flooring design can be chosen by the homeowner based on this solid foundation.

Wood has a porous structure that absorbs moisture like a sponge. How to make high-quality repairs, sheathe the walls, the ceiling with your own hands in the bathroom is most effectively worth thinking about in advance. The first thing to do is do-it-yourself high-quality waterproofing of walls, ceiling, floor. There are two ways to do this.

Coating method, which is characterized by the use of materials with excellent adhesion to all surfaces. They are easy to apply by hand.
They are of different types:

Bitumen-polymer, creating a durable insulating layer due to latex fillers. They are applied to the surface without preheating. Bitumen components securely hold the composition on the surface of the walls.
Bituminous waterproofing can be cold and hot according to the method of application. The cold method is not suitable for concrete substrates.
Acrylic waterproofing, which is by far the most environmentally friendly and modern. It is durable and plastic. Such a composition will protect any shower cabin.

Pasting materials roofing felt and roofing material have long been used in construction. Waterproofing procedures with their help are quite laborious, since they require preliminary surface preparation. In addition, old technologies involve the use of a gas burner. There are, however, more modern options. These are self-adhesive materials that are attached to the surface of walls, floors, ceilings after removing the protective film.

Interior decoration

Regardless of the chosen interior and design of the bathroom, special attention should be paid to ventilation. Its device will provide full ventilation of the room with high humidity. The exhaust piping can be placed in the false ceiling frame. Fan power should be selected based on the area of the room.

In different corners of the room on the walls, it is necessary to make two funnels for the fan, and the second exit is closed simply with a decorative grille. In this way, constant air circulation in the room is ensured.

It is better to do the floor screed with your own hands using expanded clay. This facilitates and insulates the structure. On such a base, you can install "warm floor" systems, ceramic tiles and even a moisture-resistant laminated coating. Design, interior will help to choose the fantasy of the landlord. However, the arrangement of the main structures must comply with engineering requirements for reliability and safety.

Bathroom wall cladding is most often carried out using tiles. In this case, the walls can be tiled either completely or partially. In the second case, places that are most exposed to water are covered. The rest of the wall area remains wooden, which retains a certain charm of the wooden structure, allowing you to inhale the healing air of heated nature. The tree has a magical property to give vitality, which radiate the warm walls of the bathroom. Interior design may involve finishing wooden walls with other materials.

In this case, it is necessary to take into account the characteristics of the wood itself. Under the influence of temperature changes, humidity, the tree can dry out and lose its original shape.

To preserve the beautiful cladding, it must be mounted on the crate. Moreover, such a structure can be mounted on a special sliding frame made of a metal profile. Such designs will “refresh” the design of the bathroom.

The interior design of the bathroom provides for a different arrangement of the ceiling. As the main building material, you can use moisture-resistant gypsum cardboard, as well as a tension structure. The second option will decorate the interior in aesthetic terms.

The interior design of a sanitary unit is limited only by the imagination of a person building a wooden house. Wall cladding, plumbing can be any. The main thing is compliance with the requirements of water resistance, as well as sanitary standards. To do this, vertical surfaces are treated with special antiseptic compounds that effectively protect wood from mold, fungus and decay. A shower cabin or a large jacuzzi-type bath - the choice of interior belongs exclusively to the owner in accordance with his capabilities.

Owners of wooden houses can make their bathrooms in different styles. To date, the most popular of them are: classic, eco-style, Provence, country, art deco.

Design, wall cladding of the bathroom - the decision of the owner of the wooden house. He will be able to create an image of new housing with the help of specialists who will bring to life the most unusual projects. However, it is not necessary to follow generally accepted standards. The owner himself can create a unique inimitable image of a wooden house, relying on the help of professional builders.

It is difficult to imagine a modern home without such already familiar amenities as a bathroom and a bathroom. It doesn’t matter if the bathroom is located in a private house outside the city or in an apartment, in any case, the creation of its design must be approached responsibly. Properly selected colors and thoughtful interior will provide a relaxing atmosphere where it is nice to find yourself after a hard day. Of considerable importance is the correct selection of materials, as they must be resistant to moisture. In today's article, we will learn how to make a beautiful bathroom design in a private house, and also look at interesting design options in the photo selection below.

Bathroom in a private house - layout of the room

The big advantage of a private house, compared to an apartment, is that it is possible to set the dimensions of the bathroom on your own, as well as place it in any part of the house. This significant advantage allows you to implement the most daring design solutions and equip the bathroom with additional accessories.

Whether you're building a house from the ground up, or just looking to redecorate your existing bathroom, the amount and extent of prep work required will vary.

With new construction, even at the stage of creating a design project, it is worth deciding on the location of the bathroom. This is necessary in order to immediately carry out the necessary communications during the construction process, such as water supply and sewerage, as well as perform waterproofing. At the next stage of construction, a ventilation system is created. Provided that the exhaust system is done correctly, this approach will eliminate unpleasant odors relatively quickly, reduce humidity and minimize the destructive effect of moisture on the finish of the room. When the above steps have been fully completed, then proceed to the decorative decoration of the room. Often, a bathroom in a private house has a fairly large area, which makes it possible for creativity in planning and decorating the room.

If you are planning to renovate an existing bathroom, then this will require much less effort and investment. The main preparatory actions include the dismantling of old plumbing equipment, as well as finishing the floor, walls and ceiling. To better navigate the modern design trends, we suggest looking at the photos of bathrooms in private houses below.

Installing a window in a private bathroom

The main advantage of installing a window in the bathroom is the additional possibility of airing the room. Even with an exhaust system, an open window will help to get rid of the steam much faster after taking a bath. Another plus is the increase in the level of natural light, which saves money on lighting during daylight hours. In addition, often a window sill is mounted under the window, on which several decorative elements can be placed. If your house is located in a picturesque place, then another nice bonus will be a beautiful view from the window. See how the windows of the bathroom in a private house are originally inscribed in its design in the photo selection below.

Beautiful design of bathrooms in private houses: photo of finishing ideas

Before proceeding with the direct finishing of the bathroom, it is necessary to insulate the walls and floor. These actions will help to avoid the formation of a large amount of condensate, and therefore fungus with mold in the future.

Since the bathroom in a private house is a “wet” room, the most moisture-resistant materials should be used for its decoration, of which, today, there are a large number. All these materials have their advantages and disadvantages, and of course, they differ in price. If you are thinking about how to make a bathroom in a private house fashionable and modern, then you need to know what finishing materials are the most popular today.

Ceramic tile for bathroom

This material is recognized as the most popular today, because it has many positive characteristics. This is an excellent moisture resistance, resistance to damage, as well as a huge variety of color and texture solutions. All these advantages allow you to create interiors in almost any style, it all depends on your imagination and financial capabilities.

Plastic bathroom panels

Plastic panels are the cheapest way to finish a bathroom, which is perfect for giving. The advantage of this finish can be called a large selection of colors and sizes. The main disadvantage is that the panels are easily damaged.

wall painting

It is easy to create a very original design by painting walls, combining different shades or using special stencils for decoration. Before painting, the walls must be plastered and primed. Only after preparation, a special moisture-resistant paint is applied to the walls.

natural wood

Finishing the bathroom with natural wood will make it stylish and very comfortable. For such a finish, you need to use only moisture-resistant wood species, as well as additionally treat them with special means to protect against moisture.

Wallpaper in the bathroom

To finish the bathroom, you can also use special moisture-resistant wallpaper. However, in places where there is direct exposure to water, it is better to combine with another, more moisture resistant material, such as ceramic tiles.

Until recently, a bathroom in a wooden house was a real problem for owners of cottages, dachas and other residential buildings built from timber. Due to the abundance of moisture inside the sanitary unit, all neighboring rooms often suffered. Water could condense on walls, floors, and ceilings, causing wood to rot, fungus, mold, and bad odors. But today, when the market is full of various types of waterproofing materials, it has become much easier to make a complete bathroom renovation in the country with your own hands. What is needed for this? How is the interior decoration of the bathroom? And is it possible to cope with this on your own, without outside help and the involvement of specialists?

Preparatory work on the arrangement of a bathroom in a private wooden house must be carried out at the design stage of the building. The homeowner must decide in advance on which floor the sanitary unit will be located. If the bathroom is located on the second floor, the strength of the floors should be strengthened. This can be done in two ways, either to increase the cross section of the beams, or to reduce the step between them.

Bathroom design

In addition, in order to properly equip a bathroom in a wooden private house, you need to make sure that the floor in the room where it will be located is 10-20 mm lower than in neighboring rooms. If it has the same height as in other rooms, then the water that can spill over the bathroom floor will easily flood the corridors, bedrooms and other rooms. As a result, homeowners will need to refinish the premises, replace damaged wallpaper and ceiling coverings. In addition, the premises located on the lower floors may suffer from this. As a result, additional problems, as well as unnecessary expenses for the repair of neighboring apartments.

Installation of sewerage in a wooden house on the second floor on elastic suspensions

How to waterproof the floor?

In order to successfully repair a bathroom in a wooden private house with your own hands and create a beautiful interior design in it, you must strictly adhere to a certain sequence of work. First of all, it is necessary to ensure complete waterproofing of the sanitary unit in order to prevent the spread of moisture beyond its limits. And only then is further decoration of the room carried out.

Floor plan with waterproofing in a bathroom with wooden and concrete floors

To finish a room with waterproofing coatings, you will need two materials - bituminous mastic or cement mortar, as well as a waterproofing agent (any of those available on the modern market - for example, a rubberized sheet). First, the wooden floor must be filled with a layer of mastic and wait until it is completely dry. Next, the prepared floor base is pasted over with a waterproofing sheet.

Please note: it is possible to fill the floor with concrete (cement mortar) only if the bearing capacity of the floors allows it. If these structures are not sufficiently reinforced, you should not risk your own safety - it is better to treat the floor base with a thin layer of bituminous mastic. Otherwise, the floors may simply not withstand the total mass of concrete, tiles and plumbing.

Bathroom waterproofing

Possible types of waterproofing

Protecting the water supply in a wooden house from leaks and freezing

Wall waterproofing

To make high-quality waterproofing of walls, you can choose one of the following options:

sheathe them with plastic wrap: to finish the walls with such a film, you do not need to have special skills and craftsmanship. It is enough just to measure the required amount of material along the length and height, and then evenly (with the same pitch) attach it to the surface using a construction stapler;
treated with a special solution to increase the water-repellent properties of wood. If it is important for you that the walls of the room retain their original appearance, then you will not find a better solution than treatment with a chemical waterproofing agent;
attach protective plastic panels to the walls. The easiest and most economical way to waterproof walls is to finish them with special PVC panels. The interior design will not be the most original and creative, but it will allow you to reduce repair costs.

Vertical bathroom waterproofing

Arrangement of the floor in the bathroom

Finishing a bathroom in a wooden private house can be done using any type of flooring, including:

glue stopper;
ceramic tile;
linoleum;
moisture resistant laminate;
mosaic;
porcelain tile.

Moisture resistant laminate flooring in the bathroom

Porcelain tile on bathroom floor

Bathroom tiling in a log house

Linoleum flooring

The final choice depends solely on the financial capabilities of the owners of the house, as well as on how they want to see the interior design of the bathroom. If you prefer modern styles (for example, Hi-Tech, Italian, Scandinavian, etc.), it is better to use tiles, mosaics or porcelain tiles. Linoleum, adhesive cork and laminate are more economical materials, so they are perfect for those who do not have the opportunity to buy expensive tile products and more.

Installation of various types of floor coverings is carried out using different technologies. But they have one common point: the laying of the canvas should be carried out only after the waterproofing of floors and walls has been arranged.

How to finish the walls?

Depending on which interior design you like best, you can finish the walls in the bathroom in several ways:

ceramic tiles: of course, such wall decoration will require more financial costs and effort. But the design of a bathroom that is tiled will be an order of magnitude more beautiful and attractive than when using concrete mortars or plastic panels;
wooden panels: you can decorate the walls in the bathroom with special panels made of natural wood. They have a protective lacquer coating, so that they can be immediately attached to the crate and do not spend too much time processing them;
PVC panels: PVC strips are also attached to the walls on a pre-prepared crate. Their main advantage is an affordable price. Therefore, if you want to decorate a room without large financial investments, this option will be the best solution. But such coatings have a fairly simple minimalist design. Therefore, it will be quite difficult to create a creative luxurious interior with their help.

Wall decoration with wood panels

Please note: due to the complete waterproofing of the bathroom, a greenhouse effect occurs in the room. Sooner or later, this leads to the appearance of fungi, mold and other unpleasant “surprises”. To avoid such situations, you should properly equip the forced ventilation system in the bathroom.

Arrangement of ventilation in the bathroom

To make a supply and exhaust ventilation system in the bathroom with your own hands, you must perform the following steps:

under the ceiling we fix two air ducts. One of them will be used to force air into the room, and the second - to remove. Then we remove outlets from each pipe in different corners of the room;
at the ends of the outlets we make special funnels, in one of which a fan will subsequently be installed. The second one will then be closed with a metal decorative grille;
after the final finishing of the ceiling is completed, we install a fan and a ventilation grill in the prepared funnels. This procedure should not be carried out before finishing work is completed, as this can create a number of difficulties.

Exhaust fan in the bathroom, moisture-proof duct type

Ventilation

Electrical equipment for forced ventilation in the attic

Ceiling in the bathroom of a wooden house: how to choose the best option?

As you know, heated air is collected at the top of the room, due to which the main part of the water vapor that it contains affects the ceiling. That is why it is recommended to use only suspended ceiling structures for the bathroom. They have a beautiful elegant design and go well with any interior. And most importantly - such products are highly resistant to high humidity, not collapsing under the influence of water vapor.

The technology for installing suspended ceilings is quite simple. To cope with this task, you do not have to call the masters and spend extra money on their services. This procedure consists of three main steps:

installation of plastic profiles;
fixing the ceiling on the finished frame;
glass finishing.

Plastic panels under the tree on the ceiling

Suspended ceiling in the bathroom of a private house

It should be borne in mind that finishing the ceiling of the bathroom with glass is a must. This material will not only decorate the interior design, but also provide reliable protection of the structure from high humidity. With fiberglass, a suspended ceiling can last at least 15-20 years without a major overhaul.

A photo

The main difference between a bathroom in a high-rise building and a private house is, of course, the layout.

Therefore, it is not surprising that a do-it-yourself bathroom in a private house will turn out to be much more interesting, and the owners themselves will be able to get much more from the premises than urban residents. Let's see what kind of private housing, requiring the arrangement of a full bathroom, we can talk about.

First, it's:

houses of old construction (not younger than 40 years old), which initially did not have a separate bathroom;
houses whose age ranges from 30 to 10 years;
modern houses (cottages, townhouses).

Secondly, let's clarify which rooms are intended for the location of the bathroom in the houses we have indicated:

in houses of old construction it is:

- pantries;
- part of the corridor or kitchen;
- veranda;
- places under the stairs to the second floor
- attic room;

in younger houses

- a place on the ground floor, including a built-in garage;
- expandable bathroom by connecting adjacent rooms (corridor, hallway, veranda);
- overhaul of an existing bathroom;
- second floor and attic;

in modern houses:

- creating comfortable conditions in a dedicated bathroom;
- transfer of the bathroom to another room.

Thirdly, you need to understand what materials the house is made of, because the use of this or that technology depends on it:

brick;
wood;
a combination of different materials (foam block + brick, wood + brick, shell rock + concrete, steel + concrete, etc.).

For private houses, it is not the secrecy of communications that is more important, but reliable protection against freezing. Therefore, pay more attention to insulation and protective devices for water supply lines.

These are just a few of the factors to be aware of before planning a bathroom in a private home. As you can see from the list, in most cases we are talking about initially unsuitable places in which a bathroom will be created with your own hands in a private house.

What to focus on

In addition to the work on the functional arrangement of the bathroom, the owners will need to carry out additional activities related to:

arrangement of water supply and sewerage;
equipment;
carrying out waterproofing works;
decorative flooring, walls and.

Warning!

Many city dwellers, having experience in renovations in city apartments, mistakenly believe that a bathroom in a private house will be just as predictable in terms of construction operations.

But this is fundamentally wrong, since the sanitary facilities of the apartments are fully adapted to the connection of utilities, unlike individual houses.

Let's find out what is needed for a full-fledged bathroom in terms of building codes:

availability of hot and cold water sources in the bathroom;
equipping the premises with a water drainage system (sewer drain);
Availability ;
lighting fixtures;
availability of comfortable plumbing.

As you can see, in comparison with city apartments, private houses are the least consistent with the primary requirements, which means that all these worries about arranging the premises fall entirely on the shoulders of their owners.

Of course, if a bathroom is being renovated in a private house, then the issues of water supply and sewerage have already been resolved. In such a situation, it is more important to revise the technical condition of engineering networks, and pay more attention to the redevelopment or installation of new plumbing, as well as the decoration of walls and ceilings in accordance with the tastes of the owners.

Development of new places in a private house

We welcome the modern approach that in a private house the bathroom can be anywhere. And the best place for her is the neighborhood with the master bedroom.

If it is located on the 1st floor, then the bathroom should be here, if on the second, then all communications should be laid on the 2nd floor.

Bathroom with windows on the first floor

Making the decision to furnish a bathroom is a bold step, but not yet an action. The fact that your bathroom in a private house will be different from its counterparts in a city skyscraper is very cool, but a lot of patience should be applied to this when carrying out repair and construction work.

Moreover, all the shortcomings of open communications in a private house can easily be turned into advantages. For example, equipping a room with exhaust ventilation does not have to be done with terrible-looking corrugated ventilation ducts. Today there are many elegant solutions, one of which is presented below in the photo.

Or pipes for supplying cold and hot water - why hide them in the walls when you can make them part of the design. The result will be a minimum of work associated with chasing channels in the walls, which will significantly speed up the arrangement of the bathroom.

By laying copper pipes to the washbasin and bathtub in an open area, you will get a unique design.

If you do not like to contemplate pipes, fittings and any other plumbing fittings, then it is easy to build a portal under the bathroom, inside which all engineering communications will be hidden. Do the same with ventilation - a plasterboard ceiling will also hide the air ducts.