Wall-mounted boiler proterm cheetah 23 mtv. Gas boilers "Gepard": characteristics, device, installation and reviews

You can pick up the purchased goods yourself or use the delivery service in Moscow and the Moscow region. Having placed an order today, tomorrow you will receive it at your disposal. If necessary, you can use the service of prompt delivery and receive products today.

Delivery to the entrance (check with the manager about the possibility of raising to the floor)

Delivery is made daily from 9 am to 9 pm including weekends and holidays.

Specify exact terms of delivery at the manager!

Pickup points

Delivery cost in Moscow and the Moscow region:

• Within the Moscow Ring Road - from 0 to 500 rubles, (Individual shipping cost is indicated in the product card)
• Outside the Moscow Ring Road up to 10 km - 700 rubles,
• Outside the Moscow Ring Road further 10 km - 700 rubles + 30 rubles for each kilometer.
• In the regions, delivery by a transport company (calculated individually).

Shipping cost for

km from MKAD

700 rub.

Unloading of bulky goods is carried out by the forces and means of the customer.

Money is transferred directly to the courier upon receipt of the goods. This method is the most popular among buyers due to the simplicity and ease of calculation.

Payment by bank card to the courier upon receipt

Couriers have a portable bank terminal available, which allows Teplovod-Service customers to pay for goods with bank plastic cards (check with the manager about the possibility of paying with a bank card).

Payment by credit card on the site

To select payment by bank card on the "Cart" page, select the item "Payment by bank card on the site".

Payment is made through PJSC SBERBANK using Bank cards of the following payment systems:

After clicking on the "ONLINE PAYMENT" button, you will be redirected to the payment gateway of Sberbank of Russia OJSC to enter your card details.

Please prepare your plastic card in advance. Additionally, you need to enter the full name, email, contact phone number, as well as the reservation number to identify the payer. The connection with the payment gateway and the transfer of information is carried out in a secure mode using the SSL encryption protocol.

If your bank supports the technology of secure online payments Verified By Visa or MasterCard Secure Code, you may also need to enter a special password to make a payment. You can check the methods and the possibility of obtaining passwords for making Internet payments at the bank that issued the card.

This site supports 256-bit encryption. The confidentiality of the reported personal information is provided by Sberbank of Russia OJSC. The entered information will not be provided to third parties, except as provided by the legislation of the Russian Federation. Payments by bank cards are carried out in strict accordance with the requirements of Visa Int payment systems. and MasterCard Europe Sprl.

When paying by credit card, interest is not charged.

Payment is a transfer of funds from the buyer's current account to the seller's account, we work on a common taxation system with VAT. Delivery of goods is carried out after the receipt of funds to the account of the company "Teplovod-Service". This method is used in the calculations of legal entities.

Our details

Limited Liability Company "Teplovod-Service"

OGRN: 1105003006162

TIN: 5003088884

Checkpoint: 500301001

BIC: 044525225

Bank: PJSC Sberbank of Russia

R/s: 40702810838060011732

K/s: 30101810400000000225

Jur. the address: 142718, Moscow region, Leninsky district, Bulatnikovskoe rural settlement, Varshavskoye highway, 21 km., office B-6

Special conditions

For goods with the status "On order" worth up to 100,000 rubles. no prepayment required.

For goods with the status "On order" over 100,000 rubles. a 30% deposit is required.

• For any goods sent by a transport company, 100% payment is required.

Reviews about the product «Wall-mounted double-circuit boiler Protherm Cheetah 23 MTV turbo»

There are no reviews for this product yet. Your review will be the first!

Having your own heating system saves you money by using your equipment more efficiently, reducing fuel consumption and only using your equipment when you need it.

In European countries, the advantage of this type of heat supply was understood long ago, so the production of heating boilers is widely developed there.

Gas boilers are recognized as the most rational in terms of economy and ease of use, the range of which is quite wide.

The company's products belong to the middle price segment.

Boilers of the Gepard series are designed for heating and supplying hot water to private houses or apartments of sufficient area.

Made in Slovakia, the units fully comply with all European quality and safety requirements.

Gepard boilers are manufactured only in a hinged () version, they have a separate stainless steel heat exchanger and a complete self-control system. They are able to simultaneously provide power to the heating circuit and supply hot water, which is the maximum convenience for homeowners.

Attractive appearance and compact size allow you to install the units in the kitchen or in other rooms where they do not stand out from other pieces of furniture.

Types of boilers

There are two models of boilers Cheetah:

• Atmospheric (with an open combustion chamber and natural smoke extraction).
• Closed or turbocharged (a fan is used to supply air to the combustion chamber and forcibly remove exhaust gases).

Models with an atmospheric burner are not recommended for installation in the kitchen due to the possibility of a smoke smell due to external influences. For example, strong winds or icing on the chimney can cause a decrease in draft, fraught with smoke in the room.

It is advisable to install atmospheric units in separate chambers with high-quality ventilation.

Turbocharged boilers are completely safe and can be installed in living quarters or in the kitchen.

They are guaranteed to remove exhaust gases, allowing you to keep the indoor air clean..

Both options have a full-fledged self-diagnostics system that constantly monitors the status of all nodes and immediately notifies you of emergency situations.

Series Models

The Cheetah model line is represented by two types of installations:

• Protherm Cheetah 23 MTV.
• Protherm Cheetah 11 MTV.

The choice of one or another option is tied to the area of ​​\u200b\u200bthe house or other premises that will be serviced.

The power indicator approximately corresponds to the area divided by 10. Using this method, you can calculate the most successful indicator for yourself and choose the optimal type of unit.

There is no need to purchase a boiler "for growth". The overestimated power of the unit causes a violation of the operating mode, which quickly disables the components and elements of the boiler. It is necessary to strive for the maximum correspondence between the power and the size of the room.

Specifications

Consider the parameters of the Protherm Cheetah 23 MTV boilers:

Device

The design of the Protherm Gepard 23 MTV boiler has a basic composition of assemblies and structural elements, typical for most convective installations of this type.

The main components of the unit are:

• Chrome-nickel alloy gas burner.
• Copper primary heat exchanger.
• Hydraulic group, which includes a three-way valve, water make-up and discharge devices, and other elements.
• Secondary heat exchanger in stainless steel.
• Grundfos circulation pump.
• Turbo blower.
• Expansion tank with a capacity of 5 l.
• An electronic control board with a microprocessor attached to an external panel with a display.
• A system of self-monitoring sensors that continuously monitors the status of all elements of the boiler and signals the occurrence of errors.

The boiler works according to a typical scheme. The coolant enters the heat exchanger, where it is heated to the maximum temperature.

Then it is removed and enters the secondary heat exchanger, where hot water is heated. After that, the liquid enters the three-way valve, partially mixes with the return flow and acquires a predetermined temperature corresponding to the set heating mode. After that, the RH goes into the external heating circuit.

Heating is provided by a gas burner, which automatically starts or turns off when the set coolant temperature limits are reached.

The air supply for the organization of optimal combustion is provided by a fan, which at the same time creates traction to remove the products of combustion of the gas. The air intake is made from the external compartment of the coaxial chimney, purchased separately.

The operation of all nodes is controlled by a system of sensors that monitor the presence of a flame, gas or water pressure, signal any failures or malfunctions. The appearance of any problems is immediately indicated on the display by an alphanumeric code indicating a particular error.

A complete list of codes is available in the user manual.

Instructions for setting up, connecting and starting

After delivery of the boiler, it is installed on a pre-selected surface. The package includes a special bracket that is mounted on a solid wall. It is not allowed to install on surfaces sheathed with drywall, thin or temporary partitions with low bearing capacity.

After installation, all relevant pipelines are connected:

• Gas supply.
• Direct and return line of the heating circuit.
• Cold water supply.

Work on connecting all communications must be carried out carefully, in compliance with all technology requirements.

Gas pipe connections are checked for leaks using a soapy solution. After that, the boiler is connected to the power supply network.

It is necessary to control the correct connection of the phase to the corresponding electrode, otherwise the boiler will not start.

Filling with water is carried out until the nominal pressure is obtained, which is shown on the display.

The make-up valve opens, the system is slowly filled with water so that air can escape. After that, air plugs in the boiler itself and radiators are released, after which the pressure is adjusted again.

The first start-up of the boiler is a short-term switching on of the unit to check the operability and correct connection and settings. Detected malfunctions are immediately eliminated, loose connections are carefully sealed.

Sometimes the first launch is immediately interrupted with the appearance of . This is a consequence of an air lock in the pump or other unit.

Clear the error and try again. Sometimes the first start-up has to be repeated several times until the air leaves the pump. .

NOTE!

The connection and the first start-up must be carried out by the employees of the service center, who will correctly set the system settings of the boiler. Self-configuration and start-up of the boiler will automatically cancel the warranty contract, service will be denied.

Owner reviews

In order for the information about the performance of the Cheetah boilers to be balanced and true, you should consider the reviews of the owners:

(( reviewsOverall )) / 5 Owner rating (6 votes)

Your opinion

0"> Sort by: Most Recent Highest Score Most Helpful Worst Rated

Be the first one to leave a review.

Description

Protherm Cheetah 23 MTV is a wall-mounted gas boiler designed for heating and hot water in flow mode. This model successfully combines high performance and exceptional technical characteristics with a laconic design and extremely simple operation. The boiler will ideally fit into any interior, suitable for use in apartments, cottages, country houses.

Features of the boiler Protherm Cheetah 23 MTV

This model is easy to install, use and maintain. Like other Protherm wall-mounted gas boilers of this series, the unit does not require connection to a chimney, since it has a coaxial flue gas system in its design. This allows installation in almost any room without the need for a stationary chimney.

Control over all the working processes of the Protherm Cheetah 23 MTV boiler is carried out by means of a liquid crystal display. It displays the temperature and pressure of the coolant, as well as an indication of malfunctions and informing about the need for the next preventive maintenance. The installed automation greatly facilitates the operation of the heating boiler: the burner flame is modulated automatically, the self-diagnosis function prevents the occurrence of malfunctions and equipment breakdown, the microprocessor controls all work tasks.

Protherm Cheetah 23 MTV is also distinguished by a high level of safety: the boiler has anti-freeze and overheat protection systems, anti-blocking of the circulation pump, monitors the presence of flame and draft in the chimney.

Technical description Protherm Cheetah 23 MTV

• Efficiency 90.3% (MOV models) / 93.2 (MTV models);
• independent regulation of thermal loads of the circuits of the heating system and hot water supply;
• steel plate DHW heat exchanger;
• hot water preparation 11 l/min (at ∆t=30C);
• control modes "WINTER-SUMMER", "COMFORT";
• built-in make-up valve for filling the heating system;
• built-in circulation pump with automatic air vent.

Boiler line Protherm Cheetah

You can find out more information about this model, as well as buy a wall-mounted gas boiler Protherm Cheetah 23 MTV with the possibility of delivery to any region on our website or from the sales department. If necessary, our specialists are ready to perform a full list of works on the installation of a heating boiler.

Please note that the manufacturer's warranty is valid only if the installation and commissioning were carried out by an employee of a specialized organization certified by the Protherm factory. However, having a certificate Protherm does not exclude the need for additional certification of the personnel of a specialized organization in accordance with the legislative and regulatory acts in force on the territory of the Russian Federation relating to the scope of activity of this organization.

The fulfillment of warranty obligations stipulated by the current legislation in the region where Protherm equipment was installed is carried out by the seller of your device or an organization related to it, authorized by a special agreement to perform warranty and non-warranty repairs of Protherm products. Repairs may also be carried out by an authorized Protherm service center.

The company performing warranty or non-warranty repair of Protherm equipment during the warranty period will eliminate free of charge all the defects identified by it that arose through the fault of the manufacturer. The specific conditions of the warranty and the duration of the warranty period are established and documented at the time of sale and commissioning of the machine. Pay attention to the need to fill in the "Sales Information" section, which contains the serial number of the device, sales marks and corresponding seals, sales dates and seller's signatures in the warranty cards located on the back of the product passport.

The manufacturer's warranty does not apply to products whose malfunctions are caused by transport damage, violation of the rules of transportation and storage, the use of non-freezing coolants, contamination of any kind, including hardness salts, water freezing, unqualified installation and / or commissioning, non-compliance with the instructions for installation and operation of the equipment and accessories to it and other reasons beyond the control of the manufacturer, as well as work on the installation and maintenance of the device.

The established service life is calculated from the moment of commissioning and is specified in the documentation attached to a specific product.

The Protherm factory guarantees the availability of any spare parts for this product for a minimum of 8 years after it has been discontinued.

For Protherm equipment and accessories, the manufacturer sets a warranty period of 2 years from the date of commissioning, but not more than 2.5 years from the date of sale to the end user.
Spare parts are warranted for 6 months from retail date when spare parts are installed by a Protherm certified technician.

In case of partial or complete absence of information about the sale and / or commissioning, documented, the warranty period is calculated from the date of manufacture of the device. The serial number of the product contains information about the date of issue: numbers 3 and 4 - the year of manufacture, numbers 5 and 6 - the week of the year of manufacture.

An organization that is an authorized Protherm service center has the right to refuse the end user warranty repair of equipment commissioned by a third party if the authorized service center specialist finds the above reasons that exclude the manufacturer's warranty.