home

Laminate specific gravity. Weight and cost of laminate packaging

Choosing a laminate for flooring, the owners of residential real estate are looking for a material that meets the requirements of safety, resistance to moisture, temperature changes, and mechanical deformations. All these qualities depend on the thickness, length and type of lamella. The parameters of the slats help determine how much it weighs pack laminate. This is an important indicator that determines the load on the foundation of the house itself, the floor of the apartment.

laminate flooring

Why find out the weight laminate?

Manufacturers use shrink film to pack the material, which makes it possible to see the pattern, color, and protects the boards from moisture. Below it are insert sheets with a description of the product, which indicate the manufacturer, class, properties, parameters, weight of the pack laminate.

The weight is indicated so that the buyer can decide on the type of vehicle for transporting the material home: for 2-3 packages, a car is suitable, and for a large number, a specialized truck with a tarpaulin roof is used.

Attention! Do not carry laminate in the rain, even in sealed plastic containers!

The total mass is important in the construction of a house, the foundation of a building. The question is about the pressure on the foundation of the structure. If they acquire 32 class laminate 8 mm high, and you need to find out the total weight, then the mass of the pack is multiplied by their number.

The weight of a new laminate-based flooring in wooden houses determines whether the flooring will hold it. This option requires expert advice. Each company has its own parameters. They can vary even from one manufacturer due to the class, thickness of the panels. Thanks to this, you need to know the structure of the product.

Panel structure laminate

The structure of the laminated board

The weight of the floor covering depends on the composition of the slats. Comprised Panel laminate from 4 (sometimes 5) layers:

The layer on top is made of melamine resin. It protects against deformations, chips, gives reliability, wear and thermal stability, durability.
The next layer provides the appearance of the panels: the pattern copies marble, wood, stone, etc.
The carrier layer is the base. Thermal insulation, resistance to moisture depends on it. It is made from fiberboard. Lock-type connections are located on the same layer laminate.
The finishing layer gives the rail rigidity, protection against deformation.

Most of the weight comes from the carrier layer. It is made from wood dust impregnated with resins. As a result of their solidification, a rigid plate (HDF, MDF) comes out. The layers are firmly connected to each other using a special technology. Similar material of class 32, class 33, class 34 will serve for several years.

Panel dimensions laminate

Type of typical pack

Manufacturers use different sizes, which inevitably take into account when choosing a material. The thickness of the die varies in the range of 6-12 mm. Much better parameters for boards of 8 mm thickness of class 32: their installation process is easier, they are warmer.

Another characteristic of the panel is the length. It is 1.26-1.38 m for a typical panel, but there is an original one - up to two meters. They select the length, looking at the room where the installation process takes place: if the room is small, use short dies and vice versa.

Various plate sizes

Another indicator is the width. Panels 10 cm wide copy parquet, 33 cm wide - ceramic tiles. The most common lamella width is 20 cm.

The final indicator is the weight of the package. laminate. It fluctuates depending on the class, the number of dies, and other indicators. Due to this, when purchasing panels, they take goods of the same brand, otherwise the slats will differ in color, connection locks.

Weight of one lamella and pack

Different classes have different parameters. The package weighs an average of 17 kg. Information about the weight of a stack of lamellas, one square meter, is printed on the end of the pack. Knowing this information, calculate the total weight of the decorative coating on the floor.

How much does one package weigh laminate, depends on the number of boards per square meter. The number of strips is 7-10 pieces, which is 1.5-2.5 square meters. Certain companies have 2 strips in the package.

Since the weight depends on the composition of the carrier layer, for example, lamellas 1.3 m long, 2.1 cm wide, 1.2 cm thick weigh about three kilograms. In a pack, on average, 6-10 rails, thanks to this, the packaging laminate has a weight of 16-32 kg.

The thickness of the panel plays an important role in determining the weight. Yes, dice laminate 33 classes, 32 classes, 34 classes have a significant height, thanks to this, the weight will be more, but the installation process will be easier. The wear resistance class has an effect on the weight of the panel. Thus, an 8 mm thick class 32 material weighs less than a 12 mm thick package.

How to calculate weight, knowing the density

Laminate 32 class

It happens that there is no mass on the tag, but the density is indicated. In this embodiment, there are several options for determining the weight of the coating based on the laminate.

Pack weight calculation

Dry 1 cu. m of the plate has a weight of 750-1000 kg. The material is denser if the batten is thinner, for example 8 mm laminate grade 32, grade 33 has 929 kg/cu. m, and 7 mm - 965 kg / cu. m. In such a case, the weight of the material can be calculated. To do this, find on the tag:

panel density;
area of a pack of material;
panel height.

After the density index is multiplied by the area, then by the thickness (translated into meters, for example, 8 mm is equal to 0.008 m). The resulting figure will be the weight of the pack laminate.

Even when there is no density data on the tag, you can roughly calculate the weight of the pack. In such a case, an average density value of 900 kg / cu. m, which corresponds to class 32, class 33, class 34 material.

Calculation of the mass of one square. meters laminate

With only two dimensions of the panels that the package has laminate, form how much one square meter weighs: the height of the lamella, expressed in meters, is multiplied by the density of the material.

If the weight of a meter of square material is known, it is possible to determine the mass for a dwelling: the mass of a square meter is multiplied by the area of the room.

The main thing! During the calculation, first of all, 10% is added to the total amount to fit the panels during installation. This is the main thing, because otherwise it will be difficult to find the same material later, if there is not enough of it, besides, the work will slow down.

The manufacturer attaches instructions to each package, which indicates the properties of the materials, the mounting process. Knowing the weight laminate, you can calculate the required number of panels for the room.

Parameters laminate shown in the video below:

How to buy laminate

Laminate has become one of the most popular materials used for flooring in residential and public buildings. This coating is durable and wear resistant. The composition of the laminated panels includes a fibrous wood structure - HDF. Manufacturers provide two types of laminate filling - MDF and HDF. They differ in qualitative characteristics: density and quality of fiber pressing. For wall covering, a less dense MDF board is most often used. As for the flooring, here, the choice of plates must be treated very carefully. It should have a minimum of interlayers between the fibers and have a greater density. We present the differences in the density of laminated panels depending on the material of manufacture in the table.

It is not easy to choose a high-quality and durable coating, but it is even more difficult to correctly calculate the amount that will be required to completely cover the surface. At the beginning of the repair, it is important to weigh all the technical features and material needs. Then, your repair will be quick, easy and cost-effective.

Quality indicators of laminated panels.

Specific gravity of the laminate, first of all, depends on the material from which the laminated panels are made. Most often, the outer and inner coating layers do not have much effect on the mass fraction. To a greater extent, it all depends on the intermediate layer. Stronger filling - wood fibers. Such a coating will be strong and last a long time, even if it is actively used with heavy loads (passage rooms: corridor, hallway, living room).

An equally important indicator is resistance to external factors, often moisture and fat. For laminate, these indicators have high coefficients. This is due to the coating of the top layer and the technological processes of production. In addition, the strength and workmanship of the fastener system are taken into account. The laminate has a castle structure and this is its weak point. If the material is not made correctly, cracks and breaks may appear at the junction, and this will significantly reduce the life of the coating.

When choosing a laminate, do not forget about manufacturers and brands. This can have a significant impact on the quality characteristics of the product and correctly select the weight of the laminate.

Design indicators for laminate.

When purchasing materials for repairs, it is important to correctly calculate the floor area. This is necessary to purchase a complete set of slats. There are times when one board is missing, but it is very difficult to buy the same material. Manufacturers produce lamellas of different sizes: 1285*194*8mm, 1210*191*8mm and 1324*330*8mm. The most commonly used size is 1261*189*7mm. It is believed that this size forms the correct texture of the pattern of the final coating.

Regarding weight indicators, this parameter is useful when transporting purchased materials. More often, laminate packaging weight is 17 kg, but there are packages of smaller and larger masses. Here you need to know the format, quantity and filler of the lamellas. Each manufacturer in his own way forms the amount of material in the package, but most often it is 6 - 9 pieces.

Laminate flooring is attractive due to the ease of installation, and due to wear resistance, and decent durability. However, all these qualities depend to a greater or lesser extent on the thickness of the board. Last,

Quantity Calculator

In fact, it determines how much the material weighs.

The structure of the laminated board

Unlike a conventional board, a laminate is a composite material, that is, consisting of several layers of different materials, which together form all the properties of the finished coating.

The bottom one is made of tarred paper, which serves as a kind of stabilizer: the material does not allow moisture to reach the more sensitive base layer. In some cases, the product also includes a finished substrate.
Medium - basic. This is a layer of high-strength chipboard, which determines the rigidity, reliability and stability of the structure. It depends on him how much a pack of laminate weighs.

The thickness of the base layer - 8 mm, 12 mm, also determines the strength of the joint and the reliability of the floor. With a small value, the lock turns out to be narrow and does not provide the strength of the connection. A thickness of 8 mm is optimal: at the same time, the lock is reliable and the weight of the material is small.

Decorative layer - paper or special furniture foil, which reproduces the color and structure of wood, marble, granite, ceramic tiles and others.
Protective - a layer of melamine or acrylic resin with a thickness of 0.2 to 0.6 mm. It prevents the ingress of moisture and provides surface abrasion resistance.

From the totality of all factors, since the structure determines the category of the product - class 32, class 31, it depends on how much the laminate packaging weighs.

Number of boards in a pack

The size of the pack is determined by the dimensions of the board itself. This is quite difficult to link to a square meter, since different amounts of material will be needed to cover such an area.

However, knowing the mass of the material, you can find out how much a class 33, class 32 laminate weighs, with or without a backing.

Thickness - with other equal parameters, this indicator determines the mass of the material, and, therefore, the weight of the package. The most popular are 8 mm - the usual thickness for class 32 or class 33. 12 mm is more common in grade 34 or high strength material. How much a pack of 8 mm laminate weighs is determined by other parameters.
Length - ranges from 1220 to 1380 mm, although there are specimens up to 1850 cm long. It is much more difficult to work with such lamellae. But to cover a square meter of boards, it will take a little.
Width - single-cavity, double-cavity, material imitating a parquet module will differ quite noticeably in width. So, narrow dies that reproduce parquet masonry usually have a width of 9 cm, and duplicating ceramic tiles - up to 33 cm. The most popular include a width of 18.5–19.5 cm.

The combination of all factors determines the number of boards in the box. Usually it is 8-9 pieces, but sometimes 6 or 12 pieces, depending on the dimensions of the plate. In the photo - laminated material.

How much does a laminate weigh 8 mm

In everyday life, class 33 material is the most massive. However, the weight of one board is never indicated in the documents. The weight of the box is indicated on the packaging of the material. Based on these data, it determines the weight of one die and the mass of the coating with an area per square meter.

Different manufacturers have different thickness of the material, and therefore the mass will be different. There is no one definite meaning here.

Let the package of class 33 laminate include 8 strips and have a mass of 17.4 kg. The weight of one board is determined by the usual division: 17.4 / 8 \u003d 2.175 kg. You can calculate in this way the mass of any material, since the weight and size of the board on the marking.

weight of packing,
panel thickness,
coverage area.

So, let's imagine that the length of the laminate panel is 128 cm, the thickness is 12 cm, and the width is 21 cm. The number of panels in the package is 6 pieces, while the weight of the package is 17.4 kg. Dividing 17.4 kg by 6 pieces, we get the weight of one laminate panel - 2.9 kg. A few grams should be subtracted from the resulting figure, per package. As a result, the mass of the panel will be 2.85 kg.

In a similar way, you can determine the weight of the laminate 10 mm and 8 mm thick.

To determine what area will be covered with material from 1 package, you can use the example of the same 12 mm laminate. To do this, the length and width of the panel (128 and 21 cm, respectively) should be converted to square meters and multiplied. 1.28 * 0.2 \u003d 0.24 m 2. It will take 4 panels of material per 1 square meter. We multiply 2.85 m 2 by 4 and get the weight of 1 m 2 of laminate - approximately 11 kg.

The calculation of the actual loads on the foundation of the house should be made even before you start building the house. Knowing the weight of the laminate and the substrate under it, you can correctly calculate the base of the house and the likelihood of unexpected shrinkage.

The class of the product influences the weight of the coating. In order to correctly determine the maximum load on the floor that occurs after laying the material, it is necessary to take into account all the parameters: weight, class, dimensions. The weight of the pack is usually indicated in the brochure inside the package. In order to determine the weight of the laminate, it is enough to divide the weight of the package by the number of panels.

The question of how many square meters in a pack of laminate can be called one of the most important among those that arise from homeowners during the purchase of materials intended for repair work.

Calculation of the material required for laying a new floor

Usually each pack contains 8 components with a laminated coating. The mass of such a package depends on many parameters.

The most popular and in demand can be called class 32 laminated material, which is widely used to create a finishing floor covering in both residential and office premises.

Another important factor is the size of the board. There are products designed to imitate parquet. Their width is at least 30 cm, even with a thickness of 8 mm and the number of boards in one package of 8 pieces, the weight of a pack of laminate increases markedly. This also applies to products from the board of 33 and 32 classes.

What determines the weight of the laminate? First of all, it should be said about the importance of the number of structural elements in the packaging of the laminate. 8 pieces is a standard quantity, but due to the nuances listed above and the differences that exist between types of laminated boards 32 and 33, the weight of the laminate in each package also differs markedly.

Why is weight so important

Before proceeding with the laying of a new floor covering, it is necessary to accurately calculate not only the exact number of components required to complete the work, but also the upcoming load that will be exerted on the subfloor by elements of types 32 or 33.

You will need information about:

The number of laminate sheets per room can be calculated from the width of the slats

If there are 8 pieces of lamellas in each pack, then it is realistic to determine the area on which a new floor covering can be created by calculating the number of square meters depending on the width and length of each of the lamellas in one package.

Some very well-known manufacturers put not 8, but 10 or even 12 lamellas in a box. How much laminate is in one package affects a significant and noticeable change in weight.

This is due to the application of an additional protective layer, a change in thickness.

In order to correctly calculate the consumption of products for arranging a certain room, you need to pay attention to the labeling. Each box contains detailed information on the end of which board is placed in it, what volume can be covered, if you use the individual parts of the structure contained in it, what will be the load per square meter. For more information on calculations, see this video:

How to start laying laminate flooring

Door lining with laminate

To pack the laminate, a special shrink film with a thickness of 80 microns is used. It allows you to see the pattern and color of the purchased product, and also protects the panels from dust and moisture. Under the film there are description sheets, which indicate the manufacturer, the wear resistance class and various pictograms that tell about the properties of this coating. It is also noted here how much a pack of laminate weighs, for example, the most popular class 32 with a thickness of 8 mm.

Firstly, the type of transportation of the material from the store to the house depends on the total weight of the purchased laminate. For several packages, a passenger car is suitable. For large quantities, you will have to use a special truck for transportation with a tent roof, because even sealed packs of laminate should not be transported in the rain.

When changing floor cladding in old wooden houses, the calculation of the total weight of the laminate is directly related to whether the existing floors can bear the additional load. Here you need to consult a specialist.

The top layer protects the entire structure from mechanical shock and damage, gives the material heat resistance and light resistance. It is made from melamine resin. The strength of the coating is directly related to the thickness of the layer, but this does not affect the weight of the laminate package.
The next layer gives the appearance, carries the pattern of the flooring, it can imitate natural materials: wood, granite, stone, sand, marble and even the skin of exotic animals.

The laminate layers are firmly bonded to each other, and this is done using one of two technologies: HDL produces a high pressure coating and DLP low or direct pressure. Such a floor material will be durable and will last for more than one year even under heavy loads, like the most famous class 32 laminate.

Different flooring manufacturers produce boards of different sizes, which determines the dimensions of the package and its weight. When purchasing a laminate, it is necessary to take into account these indicators.

The width of the laminate board also varies widely. 9 cm panels can mimic parquet, while 33 cm wide panels create a floor similar to ceramic tiles. The most popular types of laminate boards are 20 cm wide. This is also class 32 material with a panel thickness of 8 mm.

The last indicator of the laminate package size is the weight, which can also vary depending on the manufacturer, the number of boards, the wear resistance class and other coating parameters.

Weight of individual panels and laminate packaging

As already mentioned, the weight of a laminate panel directly depends on what its “core”, the main carrier layer, is made of. Inexpensive grades of flooring typically use fibreboard. For example, the weight of one lamella having a length of 130 mm, a width of 21 mm, and a thickness of 12 mm is approximately 3 kg. The package consists of 6-10 boards. Accordingly, the total weight will be from 16 to 32 kg. "Wholesale" packs are also sold, which consist of 20 panels. Such goods are usually transported by special loaders.

But the thickness of the panel also plays an important role. Since a laminate with a higher board height belongs to classes 32, 33 and 34, both the weight of such a coating and its quality characteristics increase. But installation is greatly simplified.

When calculating how many packs of laminate you need to purchase for laying the floor, they proceed from the total area of \u200b\u200bthe surface to be repaired. To do this, they find out the parameters of all the rooms in the apartment and add up the resulting values. In an ordinary pack of flooring, on average, 8-10 boards, which will be enough to cover 2 square meters. For example, we have a room with an area of 32 m², divide this number by 2 and get 16 or the required number of laminate packages that need to be bought. Approximate count shown. Much more accurately, this will be done by employees of the building materials store in which the purchase will be made. They will also specify how much the laminate box and all purchased goods weigh.

Do not forget that a little margin should be added to the result obtained in case of damage to individual boards during installation or unforeseen replacement during operation. It may happen that a similar laminate will disappear from sale or a similar product of the same brand will be slightly different from the one that was installed in a particular room. As the saying goes, "the stock does not pull the pocket."

One of the important characteristics of a laminate is its weight. They will not weigh the material in the hardware store, so when choosing, you will have to focus on the weight of the pack. Let's figure out how much a package of high-quality laminate should weigh.

Substrate. This is the lowest layer; paper coated with synthetic resins is used for its manufacture. The function of the substrate is to protect the core from the negative effects of moisture.
The foundation. The middle layer determines such properties of the laminate as stiffness and strength. The base is made of chipboard of various thicknesses. It is from the thickness of the base that the pack of laminate will have such a weight.

Decorative. This layer determines the appearance of the material, made from furniture foil or paper.

Protective. It is an acrylic or melamine based resin coating and has a thickness of 0.3-0.6mm. The functions of the layer are obvious - it protects the surface from mechanical damage and moisture.

coolness

This group includes material of classes 21, 22 and 23, having a thickness of 6, 7 and 8 mm, respectively. This type of flooring is currently used extremely rarely, as the service life is negligible (2-6 years).

Most manufacturers pack the material in a polyethylene film that has shrink properties. The material packed in a film keeps within in cardboard boxes.

name of the manufacturer's company;
wear resistance class;
weight of packing;
the number of items in the package;
area of one element;
code and consumer name of the decorative design of the material (“beech”, “cherry”, etc.).

Laminate is sold not in individual lamellas, but in packages. Therefore, it is necessary to know how many elements are in one pack and what is its weight. This will depend on the thickness of the material, as well as on the overall dimensions of the lamellas. Material parameters:

Since the parameters of the slats are different, the number of pieces in the pack will also be different. If we are talking about class 32 laminate, then the number of lamellas in a pack is 8-9 pieces. The number of other types of laminate elements can vary from 6 to 12 pieces in one package.

Thus, the weight of the pack is influenced by such parameters as:

The weight of the pack, as a rule, is indicated by the manufacturer in the marking. There you can also find information about the number of items in the package. Knowing these values, it is easy to calculate how much one element weighs. For example, if the mass of a pack is 16.8 kilograms and there are 8 lamellas in it, then the mass of one element will be 16.8. 8 = 2.1 kilograms.

Why do you need to know weight?

So, when buying a laminate, you need to pay attention not only to the appearance of the laminate, but also to the properties of this material, including weight. Judging by the weight of a pack of material, it will be possible to draw a conclusion about the thickness, and hence the strength of the selected material.

Leave a review

A significant influence on the mass of the flooring has its structure, namely, what its "core" is made of. For laying in rooms with different traffic, types of laminate with a wood-fiber base, MDF or HDF are intended. The most durable and dense option is HDF board. In the process of its production, the method of thermal pressing under pressure is used. It determines the density of the material. However, if such a characteristic as density is not always indicated on the product packaging, the three standard parameters in the quality certificate must be present without fail. These include:

In addition, the packaging may contain information about the length and width of the panels, their number.

So, let's imagine that the length of the laminate panel is 128 cm, the thickness is 12 cm, and the width is 21 cm. The number of panels in the package is 6 pieces, while the weight of the package is 17.4 kg. Dividing 17.4 kg into 6 pcs. we get the weight of one laminate panel - 2.9 kg. A few grams should be subtracted from the resulting figure, per package. As a result, the mass of the panel will be 2.85 kg.

To determine what area will be covered with material from 1 package, you can use the example of the same 12 mm laminate. To do this, the length and width of the panel (128 and 21 cm, respectively) should be converted to square meters and multiplied. 1.28 * 0.2 \u003d 0.24 m 2. 4 panels of material will go per 1 square meter. We multiply 2.85 m 2 by 4 and get the weight of 1 m 2 of laminate - approximately 11 kg.

Why do you need to know the mass of the floor covering?

When carrying out repair work, it must be remembered that the main load always falls on the floor covering. If we talk about a laminate floor, then in order for it to last longer, a substrate is placed under the lamellas, self-leveling mixtures are used when constructing a subfloor.

Laminate pack size and weight, number of panels per pack

How many square meters in a pack of laminate: determine the quantity

Calculation of the required amount of material and how to find out how much a laminate package weighs

Choosing and laying a laminate - the size of the board: is it important or not?

Height is an indication of the thickness of the board. It varies from 6 to 12 millimeters. It is believed that 8 mm boards are best; professionals like to work with them. Such strips are produced by all manufacturers without exception. They have very good features:

The length also varies. Options from 126 to 138 centimeters. This is about the standard. There are exceptions, but they are quite rare.

Useful information. Before the final choice, you need to look at the room where the laminate will be laid.

Width, of course, also varies.

The width of narrow boards is 9 cm. They imitate parquet. There are boards 33 cm wide imitating tiles. Sometimes lovers of these coatings can be content with imitation. The floor laid out with a board of about 20 centimeters looks most natural. This is the most popular type of laminate flooring.

Important. It is impossible to say the exact weight of the package, as already mentioned, there is a big dependence on the manufacturer. There are many lamellas with identical length and width indicators, but there are also many, with very different parameters. Weight can be found at the time of purchase. On a pack with lamellas at the end, it is indicated exactly.

How many laminates are in one pack?

There are usually 8-10 boards in a pack of laminate, which is enough for about 2 square meters of flooring. If the room where it is planned to lay the coating has an area of 12 square meters, then for this you need to purchase 6-7 packages.

Firstly, damage to the lamella during installation is possible. Even for an experienced master, this can happen.
Secondly, it is necessary to leave the lamellas in case of repair with the replacement of the board later, as it is used and possible damage.

These manufacturers include - Kronostar, Kronospan, Kronoflooring,quick-step,Tarkett etc. There can be 4 boards in their packages, maybe 10. Sometimes there are 5, and 6, and 7, and so on. There is no single answer to speak of. There are manufacturers who always, regardless of the collection, have lamellas that are approximately the same.

The manufacturer is obliged to attach and attaches instructions with the characteristics of the material. There are also installation instructions. Even at home, you can estimate how much laminate is needed to cover the floor. Knowing its area and the number of boards in a pack, this can be easily done.

The structure of the laminated board

Unlike a conventional board, a laminate is a composite material, that is, consisting of several layers of different materials, which together form all the properties of the finished coating.

The bottom one is made of tarred paper, which serves as a kind of stabilizer: the material does not allow moisture to reach the more sensitive base layer. In some cases, the product also includes a finished substrate.
Medium - basic. This is a layer of high-strength chipboard, which determines the rigidity, reliability and stability of the structure. It depends on him how much a pack of laminate weighs.

Decorative layer - paper or special furniture foil, which reproduces the color and structure of wood, marble, granite, ceramic tiles and others.
Protective - a layer of melamine or acrylic resin with a thickness of 0.2 to 0.6 mm. It prevents the ingress of moisture and provides surface abrasion resistance.

From the totality of all factors, since the structure determines the category of the product - class 32, class 31, it depends on how much the laminate packaging weighs.

Number of boards in a pack

The size of the pack is determined by the dimensions of the board itself. This is quite difficult to link to a square meter, since different amounts of material will be needed to cover such an area.

However, knowing the mass of the material, you can find out how much a class 33, class 32 laminate weighs, with or without a backing.

Thickness - with other equal parameters, this indicator determines the mass of the material, and, therefore, the weight of the package. The most popular are 8 mm - the usual thickness for class 32 or class 33. 12 mm is more common in grade 34 or high strength material. How much a pack of 8 mm laminate weighs is determined by other parameters.
Length - ranges from 1220 to 1380 mm, although there are specimens up to 1850 cm long. It is much more difficult to work with such lamellae. But to cover a square meter of boards, it will take a little.
Width - single-cavity, double-cavity, material imitating a parquet module will differ quite noticeably in width. So, narrow dies that reproduce parquet masonry usually have a width of 9 cm, and duplicating ceramic tiles - up to 33 cm. The most popular include a width of 18.5–19.5 cm.

How much does a laminate weigh 8 mm

Different manufacturers have different thickness of the material, and therefore the mass will be different. There is no one definite meaning here.

pol.info-potolki.ru

QUICK STEP Classic	979	12,5 (7)	0,001824
MAGNAT	977	22,5 (8)	0,00256
TARKETT Lamiart	923	14,8 (8)	0,002005184
TARKETT vintage	923	14,8 (8)	0,002005184
FLOORWOOD Brilliance	918	16,44 (9)	0,00198912
FLOORWOOD Prestige	913	12,66 (8)	0,00173328
CLASSEN Progressive	911	15 (10)	0,00164608
KRONOSTAR Superior	909	15,5 (8)	0,00213072
EGGER Classic 32	901	14,3 (8)	0,001984512
EGGER Classic 33	901	14,3 (8)	0,001984512
FLOORWOOD City	901	16 (9)	0,00197376
FLOORWOOD Optimum	896	15,5 (9)	0,001921764
FLOORWOOD Benelux	892	14,5 (12)	0,001353936
LAMINELI Kuban	892	15,2 (8)	0,00213072
LAMINELI Siberia	892	15,2 (8)	0,00213072
FLOORWOOD Renaissance	889	17,5 (8)	0,002461472
FLOORWOOD Profile	880	15 (8)	0,00213072
KRONOSTAR Favorite	880	15 (8)	0,00213072
FLOORPAN Black	854	14,56 (8)	0,00213072
FLOORPAN Red	854	14,56 (8)	0,00213072
TARKETT Cinema	850	13,63 (8)	0,002005184
TARKETT Holiday	850	13,63 (8)	0,002005184
KRONOSPAN Castello	844	15 (9)	0,00197376
KRONOSPAN QuickStyle	844	15 (9)	0,00197376

wikiweight.info

Laminate 33 class characteristics

home ⇒ building materials ⇒ finishing ⇒ laminate

The most popular class 33 laminate board has a length of 1380 (mm), a width of 193 (mm), a thickness of 10 (mm), and its weight is about 1.186 (kg).

Possible weight of class 33 laminate:

The parameters of the laminate of this wear resistance class are not standardized and depend on the specific manufacturer. The dimensions of the board are indicated in the format "length / width / thickness". The mass of the most common models:

Board 1380x193x10 (mm) - 1.186 (kg), package weight of 7 pieces - 8.3 (kg).
Board 1286x194x12 (mm) - 2.075 (kg), package weight of 6 pieces - 12.45 (kg).
Board 1380x191x8 (mm) - 0.889 (kg), package weight of 8 pieces - 7.112 (kg).
Board 1286x160x12 (mm) - 1.063 (kg), package weight of 8 pieces - 8.505 (kg).

Important: most manufacturers produce packs of class 33 laminate containing from 7 to 10 boards, while the package weighs from 7 to 18 (kg).

Important: formula for calculating weight: length x width x thickness x density.

Laminate density table by brandBrand Brand name Density Board density in (kg/m3) Packing Packing weight, in brackets number of panels (kg) Volume Panel volume in (m3)

QUICK STEP Classic	979	12,5 (7)	0,001824
MAGNAT	977	22,5 (8)	0,00256
RITTER Hannibal	953	17,2 (6)	0,003008544
RITTER Charlemagne	953	17,2 (6)	0,003008544
RITTER Peter 1	953	17,2 (6)	0,003008544
RITTER Harald Harsh	953	17,2 (6)	0,003008544
BRILLIANT	929	19,5 (6)	0,0034992
TARKETT Lamiart	923	14,8 (8)	0,002005184
TARKETT vintage	923	14,8 (8)	0,002005184
RITTER George the Victorious	922	15,4 (8)	0,002088576
RITTER Maya	922	15,4 (8)	0,002088576
RITTER Nefertiti	922	15,4 (8)	0,002088576
RITTER Justinian the Great	922	15,4 (8)	0,002088576
FLOORWOOD Brilliance	918	16,44 (9)	0,00198912
FLOORWOOD Prestige	913	12,66 (8)	0,00173328
CLASSEN Progressive	911	15 (10)	0,00164608
KRONOSTAR Superior	909	15,5 (8)	0,00213072
EGGER Classic 32	901	14,3 (8)	0,001984512
EGGER Classic 33	901	14,3 (8)	0,001984512
FLOORWOOD Deluxe	901	16 (6)	0,00296064
FLOORWOOD City	901	16 (9)	0,00197376
QUICK STEP Creo	901	11,5 (8)	0,001596
FLOORWOOD Optimum	896	15,5 (9)	0,001921764
KRONOSTAR Family	894	15 (9)	0,00186438
FLOORWOOD Benelux	892	14,5 (12)	0,001353936
LAMINELI Kuban	892	15,2 (8)	0,00213072
LAMINELI Siberia	892	15,2 (8)	0,00213072
FLOORWOOD Renaissance	889	17,5 (8)	0,002461472
VERSALE RoyalStyle	885	25,5 (5)	0,00576
FLOORWOOD Profile	880	15 (8)	0,00213072
KRONOSTAR Favorite	880	15 (8)	0,00213072
KRONOSPAN Ultimate	869	15 (7)	0,0024672
FLOORWOOD Serious	863	18 (10)	0,00208494
FLOORPAN Purple	859	13,73 (10)	0,00159804
FLOORPAN Black	854	14,56 (8)	0,00213072
FLOORPAN Red	854	14,56 (8)	0,00213072
FLOORWOOD Real	854	15,4 (9)	0,00200475
TARKETT Navigator	850	12,78 (5)	0,003007776
TARKETT Cinema	850	13,63 (8)	0,002005184
TARKETT Holiday	850	13,63 (8)	0,002005184
KRONOSPAN Castello	844	15 (9)	0,00197376
KRONOSPAN QuickStyle	844	15 (9)	0,00197376
TARKETT Artisan	844	13,33 (7)	0,002255832
TARKETT Estetica	844	13,33 (7)	0,002255832

Laminate is a wonderful floor covering that fills the house with cosiness and warmth, while radiating elegance and style. The material is produced in countless shades and textures, so that for each room you can find your ideal option, easily combined with the furniture and color scheme of the room. We have selected for you 90 photos that reflect the versatility of the laminate.

Laminate is a multilayer material. The top layer forms a film, in fact, and gave the name to the coating. This high-strength material ensures the strength of the laminate board. The basis of the laminate is the middle layer - fiberboard (hardboard), made under high pressure. A special paper impregnated with resins is used as the bottom layer of the board. Its functions are to protect fiberboard from moisture and stabilize the entire structure. In the production of a laminate board, all three layers are connected under the influence of high temperatures and pressure.

Advantages of laminate

Strength. Thanks to the wear-resistant surface combined with the hard core, the laminate is very resistant to wear.

Water resistance. Unlike parquet, laminate is relatively water resistant. The top and bottom layers reliably protect the wooden core from water penetration. If, nevertheless, the water managed to seep through, then the middle, wooden, layer is impregnated with resins, which to some extent protect it from the harmful effects of water.

Impact resistance. The laminated board will withstand the impact of high heels and suddenly falling objects, as well as the pressure of heavy furniture.

Scratch resistant. There are no scratches on the laminate either from the wheels of office chairs or from the legs of retractable chairs.

Pollution resistant. Not only traces of a marker or lipstick, but even such serious contamination as traces of nail polish are removed very simply: just wipe the stain with a clean cloth soaked in acetone.

Ease of masonry. You do not need to have any special skills to lay a laminate. In addition, the material does not require any grinding or sanding.

Laminate is easy to install

Laminate has another positive side: for all its strength, it looks like natural wood. Most often, at a glance, a laminate cannot be distinguished from a parquet board. If desired, you can find models of laminate boards that repeat not only the color, but also the texture of wood, for example, in the msklaminat.ru online store. There are also models of laminate for tiles: on the one hand, they fit perfectly into the interior of the kitchen or hallway, on the other hand, they retain the warmth and comfort of wood.

Oak effect laminate with pronounced texture

Laminate for tiles in the interior of the kitchen

Laminate in a classic interior

Laminate in the interior of the living room

Shop floor with laminate flooring

Delicate interior design with white laminate flooring

Laminate in the interior of the hallway

Top 13.03.2017

Floor coverings on the modern market are presented in a large assortment. But, one way or another, the laminate is especially popular. It has many shades, has a low cost, while quite practical, reliable option. But its duration may vary. It depends on various factors: the level of wear resistance, price, manufacturer, coating care and timely processing. Consider the service life of a laminate of various wear resistance classes, tips on how to increase the indicator.

What is laminate

In order to find a really high-quality material that will last your home for a long time, you should find out what each layer of the floor should consist of. In this case, you can check its quality. So, modern flooring consists of the following main layers:

decorative layer. This is the top surface, it consists of a special film based on melamine resin. It is this material that protects the surface from possible deformations, as well as high humidity and temperature. During the selection, pay special attention to this coating, the durability of the application depends on it;
The base layer can be of two types: based on fiberboard (fibreboard) and chipboard (particle board). Each option has disadvantages and advantages. It is best to choose fiberboard, as the material is more durable, dense. This will help to withstand almost all the loads that are placed on it;
Water repellent finish. The durability of the use of the finishing material also depends on its quality, especially if it is used in a room with high humidity. The composition should not have substances harmful to humans, this factor can be checked in the certificates for the material.

Characteristics of 31 and 32 classes

As already mentioned, the service life of the presented flooring depends on which wear resistance class is selected. So, if you decide to choose a class 31 laminate, you can expect a service life of 2 to 10 years. It all depends on the use of the coating and the manufacturer. Experts recommend choosing this option for arranging rooms with an average level of traffic. Only in this case, the finishing material can last a very long time. The service life of laminate 32 is slightly higher. When used in a residential area, it can last about 15 years, and in a commercial one - about 5 years. Please note that the presented material is perfect for arranging a living room, corridor, bedroom. Typically, the coating has an anti-slip coating, the top layer is embossed, which ensures safety during operation.

Service life of laminate 33 class

This is the best option in terms of service life. It is approximately 20 years in a residential type building and approximately 12 in office buildings. It is class 33 that is considered ideal for finishing work in any room, regardless of its purpose. Please note that the cost of this option is very high, so for rooms with a low pass rate (for example, a bedroom) this is a waste of money. Perfect fit 31 or 32 type of flooring.

How to increase finishing service

It is worth considering that the durability of the selected model depends on many factors that must be taken into account during the installation of the finish and its operation. So, we advise you to take into account such factors to create a durable surface:

Pay attention to the styling tips that manufacturers offer you;
The material for work must be in a dry room;
When cleaning, do not use a too wet cloth.

Popular entries

mfc04.ru

Laminate pack weight 33 class 8 mm

The well-known laminate was invented in Sweden in the last century. Since then, laminate flooring has gained popularity in the world, because it has a lot of advantages compared to other types. How to care for class 33 laminate, what technical characteristics it has and how to make the right choice, you will learn about this from this article.

Laminate under parquet 33 class

Laminate classes

What does 33 mean and what is this class? It is classified by strength, and the number 33 is a symbol. The classes are determined by 18 different experiments, in which the strength characteristics of bending, impact, fire and moisture are measured.

So the following strength classes are distinguished.

Class 21 - the use of a low-class laminate is acceptable in rooms with little traffic, such as a living room or bedroom.
22 - this class of laminate is used in rooms in which the patency is not so great, but there are frequent mechanical effects. For example, in the playrooms for children, there are 22 laminates in place.
23 - corridor and kitchen - frequently used and passable rooms in the apartment. They need a durable and moisture-resistant material, because these rooms are characterized by frequent exposure to moisture.
31 - floor coverings of this class are used more and more often. They replace the previous classes, due to the fact that the price is not high, but the strength is better. For example, such a laminate is used in rooms that are characterized by rare crowds of people, for example, a conference room.
Strength class 32 is used for office premises, where there is a large turnover of people. Ladies on stilettos, which is typical for offices, pose the greatest danger to the surface of the coating.
33 is placed in gyms and dance halls or in other public places with a large flow of people, such as in stores.
34 - the most durable of all presented, made for halls and rooms with a large number of people.

As you can see, there are many varieties of laminate flooring. According to the first digit of the symbol, the general purpose of the coating is determined: 2 - for the premises of the apartment, 3 - for public places.

Grade 33 laminate structure

Any laminate is made in a certain way, depending on the technology. The main feature is the basis of the design - fiberboard. It is, first of all, processed under certain thermal conditions by a press. The next stage of processing the plate is melamine. Melamine resin keeps the flooring resistant to wear. The more its layer, the better. After that, paper is applied to the processed plate. Patterns and drawings are applied over the paper, usually the texture is an imitation of natural wood. Next comes the laminating layer, which gives the panels smoothness or relief, it all depends on the type of panels and stamping.

High technical characteristics are obtained due to the special structure

Coating class 33: distinctive characteristics from 32

Sometimes some do not see the difference between 32 and 33 models and equate them in quality. This is explained by the fact that the technical characteristics do not differ, but the prices for them are different. And often because of this, questions arise: is it necessary to overpay? It is worth reassuring everyone and answering that there is a difference in technical indicators. We need to consider them deeper, and not delve into the surface.

The thickness of the panel of the 33rd strength class reaches 12 mm, and the 32nd class, in turn, does not represent a model thicker than 10 mm. The difference in thickness affects the maximum permeability of the panels, so, therefore, it is higher for 33. At 33, the locking system is reinforced and more reliable than at 32, which has a simple collapsible lock. This is achieved with the help of special impregnations that increase the moisture resistance of the material.

They are confused with each other because of the similarity of textures and their diversity. Those and others have not only imitations under a tree, but also under a stone, and a tile. A series of unique models - class 33 glossy material, which has an indelible surface that you will not find in any other class.

Varieties of laminate 33 class

Each class of laminate has its own subspecies. So class 33 has its own arsenal of panels with different thicknesses. The size of the thickness of the laminate class 33 is found in 8, 10 and 12 mm.

Laminate without bevel

Coating 33 grade 8mm

Although 33 for commercial purposes, but still 8 mm models are widely used for residential premises. It makes no sense to use a durable coating in the bedroom or in the nursery. For them and other living spaces such as kitchens, living rooms, hallways, etc. preferably 31 and 32 classes.

They are mainly used in places with increased load: conference rooms, shops. But still, for rooms with more traffic, thick panels, or class 34, are better suited.

Laminate with a thickness of 8 mm has a number of the following advantages.

For domestic purposes, it has been used without problems for 20-25 years. Some manufacturers guarantee lifetime use of their products for domestic purposes.

White shade: 33 grade can be used for home

It tolerates moisture well. Even models that do not have additional moisture-resistant layers endure water procedures.
Democratic prices. The opinion about the high cost of such models is erroneous. How much does a pack of laminate weigh? The price is calculated from square meters, and not from the thickness of the model. And for one square meter you need to pay 1000-1500 rubles. Moreover, 33 laminate, Belgium and Germany - producing countries, represent decorative panels in the same price category.
Design. A variety of designs with and without chamfer, both in different structures of wood and stone. Wenge6 laminate, bleached oak, etc. are popular.

Wenge 33 class

Easy installation. When laying, you need to insert the boards one by one, assembling like a puzzle.
Caring for class 33 laminate is unpretentious. The protective structure of the material does not retain dust and dirt on the surface. Easy to clean with a wet cloth.

Attention! The weight of a pack of laminate class 33 with a thickness of 8 mm is an average of 15 kg.

Laminated coatings have different thicknesses. The opinion that the greater the thickness, the stronger it is - a delusion. Because 8 mm laminate is called universal and optimal. High sound insulation, quality of the locking mechanism and low prices - that's what attracts buyers. At the same time, packing of thick panels will cost 1.5-2 times more.

Coating 33 class 10mm

The thick model seems to be a versatile and practical option. Characterized by 10 mm panels with a long service life and a reliable layer structure. Like 8 mm panels, they have a lot of advantages:

It tolerates high loads well.
Resistant to low temperatures.
Good soundproofing.
The non-slip coating allows it to be used in rooms with high humidity.
Easy care.
Waterproof laminate.

Waterproof laminate, glossy surface

Laminate 10 mm from France impregnated with resins under high pressure is popular. Their cost is more than that of 8 mm models made in France, but remains acceptable.

In recent years, 10 mm floor coverings from France and Belgium have been popular on the market. Using a laminate from Belgium 33 class will give the following benefits:

universal design;
easy and unpretentious installation. It is easy to cope with the installation even for a non-specialist;
simple maintenance of moisture-resistant, non-contaminating surfaces;
easy repair and maintenance;
safe and environmentally friendly material. Even products without a chamfer are not susceptible to mold;

Panels without chamfers are very popular. In particular, German products stand out.

Coating 33 class 12mm

There are many advantages to such thick panels. So, according to many experts, 12 mm is acceptable in cases where the room has a large area. At 40 square meters or more, a 12 mm laminate with a locking joint mechanism is installed. The larger the area, the more sway occurs. Under such conditions, thin panels suffer more deterioration in quality.

The thickness of the flooring is important when it is joined with other types of flooring. For example, when joining with tiles, it is not necessary to use thresholds if the thickness of the laminate and tiles is on the same level.

Large thickness protects against excessive sounds. At 12 mm, the locking mechanisms are more reliable than at 8 mm.

It follows that thick floor coverings are used in rooms with high traffic. Thin panels are designed for domestic use.

There are also some drawbacks to using thick coatings. They include:

high prices;
laminate class 33 and a thickness of more than 10 mm does not provide for the use of the "warm floor" system. The thicker the floor covering, the more difficult it is for heat to break through;
the dry microclimate of the room negatively affects floor coverings made of thick laminate. They dry out and the gaps between the panels become more noticeable every year.

Based on the above, it follows that the use of class 33 laminate in residential premises is not so necessary, since this model is for commercial use. For residential premises, 31 and 32 strength classes are more suitable. Their use is sufficient for any premises of the apartment.

Large ones are characterized by a large number of visitors, therefore, a durable laminate is needed.

For rooms with a large number of people and traffic, class 33 material is used not thinner than 10 mm. Large loads on the floor covering made of thin panels disable it, and thicker specimens are able to withstand 10 years of stress in their original form.

How to choose a laminate, what to be guided by when choosing? Learn all about it from the video

Average score of ratings over 0

Weight of 8 laminate (mm)

home ⇒ building materials ⇒ finishing ⇒ laminate

The most popular laminate board with a thickness of 8 (mm) 32 wear resistance class, having a width of 192 (mm) and a length of 1292 (mm), weighs 1.825 (kg).

The laminate does not have standard parameters, its dimensions and weight depend on the manufacturer's design solutions. The dimensions of the board are indicated in the format "length/width/thickness".

The mass of the most popular samples:

Board 31 class, 1292x245x8 (mm) - 0.915 (kg), package weight of 8 pieces - 7.32 (kg).
Board 32 class, 1380x191x8 (mm) - 0.889 (kg), package weight of 8 pieces - 7.112 (kg).
Board 32 class, 1292x192x8 (mm) - 1.825 (kg), package weight of 8 pieces - 14.6 (kg).
Board 33 class, 1286x282x8 (mm) - 2.5 (kg), package weight of 6 pieces - 15 (kg).

Important: laminate with a thickness of 8 (mm) is intended for laying in residential and commercial premises of medium traffic, subject to the regulations of use, its service life is up to 20 years.

Important: formula for calculating weight: length x width x thickness x density.

Laminate density table by brandBrand Brand name Density Board density in (kg/m3) Packing Packing weight, in brackets number of panels (kg) Volume Panel volume in (m3)

QUICK STEP Classic	979	12,5 (7)	0,001824
MAGNAT	977	22,5 (8)	0,00256
TARKETT Lamiart	923	14,8 (8)	0,002005184
TARKETT vintage	923	14,8 (8)	0,002005184
FLOORWOOD Brilliance	918	16,44 (9)	0,00198912
FLOORWOOD Prestige	913	12,66 (8)	0,00173328
CLASSEN Progressive	911	15 (10)	0,00164608
KRONOSTAR Superior	909	15,5 (8)	0,00213072
EGGER Classic 32	901	14,3 (8)	0,001984512
EGGER Classic 33	901	14,3 (8)	0,001984512
FLOORWOOD City	901	16 (9)	0,00197376
FLOORWOOD Optimum	896	15,5 (9)	0,001921764
FLOORWOOD Benelux	892	14,5 (12)	0,001353936
LAMINELI Kuban	892	15,2 (8)	0,00213072
LAMINELI Siberia	892	15,2 (8)	0,00213072
FLOORWOOD Renaissance	889	17,5 (8)	0,002461472
FLOORWOOD Profile	880	15 (8)	0,00213072
KRONOSTAR Favorite	880	15 (8)	0,00213072
FLOORPAN Black	854	14,56 (8)	0,00213072
FLOORPAN Red	854	14,56 (8)	0,00213072
TARKETT Cinema	850	13,63 (8)	0,002005184
TARKETT Holiday	850	13,63 (8)	0,002005184
KRONOSPAN Castello	844	15 (9)	0,00197376
KRONOSPAN QuickStyle	844	15 (9)	0,00197376

Laminate packaging weight and cost: useful information and installation tips, options for laying laminate yourself

Many are interested in the cost of one package of laminate and what manufacturers are based on when setting the price. Everything is very simple, you need to pay attention to the design and dimensions of the panels.

Each manufacturer has its own standards regarding the price category. In most cases, the parameters of the laminate differ from each other even from one manufacturer. This is due to the fact that each type of panel has a different wear resistance class, weight and thickness of the panels.

Therefore, it is important to know what such products consist of. In addition, for more interest, you can watch a video clip to find out what manufacturers are guided by when setting the price for a laminate.

One package of QUICK-STER laminate, which belongs to class 32, weighs 12 kilograms.

A special wear-resistant layer of transparent color is applied on top of the laminated board. It is responsible for the abrasion of the panel surface and the classiness of the product. The cover is made from melamine resin. Corundum is added to the glossy acrylic version, which gives the soft acrylic the necessary hardness. The durability of the coating depends on the thickness of the layer, but it does not affect the weight of the laminate package.
The decorative layer is made of paper, which, according to the RAL table, can have any color and pattern, depending on the manufacturer's imagination. But in most cases, factories produce laminate with a pattern that imitates natural materials, including wood, stone, granite, marble, sand, etc. Such characteristics of the material practically do not affect its price.
A moisture-proof film is laid under the decorative layer, which is designed to protect the lowest HDF board. Such waterproofing plays an important role in the composition of the panels. The film reliably protects the material from moisture, even accidentally spilled water will not affect the structure of the laminated floor for three days. Such strong protection is not put on all laminate options, although many manufacturers will improve their products. To find out if the material has protection, you can find out from the instructions that came with the package.
The number four in the figure marks the stabilizing part of the panel, which is made from a high-strength fiberboard. It is important to know that the HDF marking is a mark of the European Manufacturers Association. It affects the dimensions, weight of the laminate packaging and each panel individually. The thickness of one panel determines its strength and the quality of the lock embedded around the perimeter, its operation.
On the bottom of the panel there is kraft paper, which in turn is designed to protect the stabilizing layer from the damp floor on which the laminated panels are laid. This layer usually contains complete information about the laminate, its parameters, characteristics, class and other details are indicated. Some manufacturers equip their products with an additional layer, that is, a substrate, which somewhat affects the weight of the flooring.

Trying to understand what manufacturers are guided by when setting the price for laminate packaging, its weight or other characteristics, it is important to know that neither the weight nor the dimensions of the laminated coating affect its installation. Therefore, when choosing this flooring, you do not need to pay special attention to the weight or dimensions of the package. At the same time, it is worth saying that the packaging is not at all heavy, even a teenager can easily lift it, not like an adult.

Different types of laminated panels can have dimensions that differ significantly from each other. So, for example, let's take a table in which panels are located, depending on the size of their area.

It is important to know that the weight of 1 square meter of laminate does not affect their area in any way, which cannot be said about the thickness. Not only its weight, but also the weight of the entire package depends on the amount of material consumed for the manufacture of one panel.

As a result, the mass of the panel depends on the amount of materials included in its composition. Most often, manufacturers pack 8 panels in a package, although sometimes there are packaging packs of 6 pieces.

wear resistance classes.

As you know, laminate is also distinguished by the class of wear resistance. So, for example, panels from a Chinese manufacturer can have a thickness of 8 mm, 10 mm, or 12 mm, depending on the wear resistance class.

Everyone is well aware that panels having a thickness of 8 mm will weigh less than similar panels of a different thickness. The parameters of laminated boards, as a rule, are indicated on the packaging, including its weight, in general, so it will not be difficult to find out the weight of one panel.

To do this, it is enough to divide the weight of the package by the number of panels in it. Usually one package weighs at least 12 kg. and not more than 17 kg.

Useful information! You can try to calculate the weight of class 33 laminate, which has the following parameters: 1280 * 240 * 12 mm and the weight of the whole package is 17.4 kg, packaging is 8 pieces. Knowing such parameters, it is very simple to calculate the weight of the panel - 17.4 / 8 = 2.175 kg. Such calculations can be carried out with any laminate packaging, regardless of its size and brand.

Considering that thick panels belong to a high wear resistance class, their weight will also increase, as well as positive characteristics. Thus, the installation of the laminated coating will be significantly simplified and its service life will be extended.

Conclusion.

Summing up the above, it is worth mentioning that heavier and thicker panels have many advantages over their light counterparts. They are heavy because they have locks embedded in the HDF around the entire perimeter.

The quality and correct operation of the lock during the installation of the floor covering depends on the width of the lock. The advantage of such panels is that when docked, they practically do not form gaps.

But if they are all there, then you can fix them with a regular hammer, and this is very easy and simple.

www.laminatguru.com

How much does a package of laminate weigh - inkmilk.ru

When making repairs, it is very important to choose high-quality and reliable finishing materials. In addition, you need to know exactly how much material is needed to carry out the work. After all, materials are expensive and it is unprofitable to buy them with a large margin. If a laminate is chosen, then you need to know not only the dimensions of the lamellas, but also their weight. Let's figure out how much one package of laminate weighs and what parameters affect the weight of the material.

One of the most popular floor coverings is laminate. This coating looks attractive, it is easy to lay it yourself. But first you need to choose the right material.

The appearance of the coating is determined by the polymer film that covers the laminate from above, but the weight of the material will depend on its base. Let's figure out what the structure of the laminate board is. This material is a multilayer structure, it consists of the following layers:

Substrate. This is the lowest layer; paper coated with synthetic resins is used for its manufacture. The function of the substrate is to protect the core from the negative effects of moisture.
The foundation. The middle layer determines such properties of the laminate as stiffness and strength. The base is made of chipboard of various thicknesses. It is from the thickness of the base that the pack of laminate will have such a weight.

Advice! The thickness of the base layer also affects the strength of the interlock. The optimal thickness for a laminate is considered to be 8-12 mm.

Decorative. This layer determines the appearance of the material, made from furniture foil or paper.

Advice! The most popular option for decorating the surface of the board is a pattern that imitates the surface of different types of wood. But you can find other colors, for example, imitating the surface of a decorative stone.

Protective. It is an acrylic or melamine based resin coating and has a thickness of 0.3-0.6mm. The functions of the layer are obvious - it protects the surface from mechanical damage and moisture.

coolness

Based on the combination of various parameters (thickness of the main and protective layers, strength, etc.), the class of the laminate is determined. Laminate for domestic purposes is not very resistant to abrasion and strength.

Much more often, consumers choose material for industrial purposes - 31, 32 and 33 classes. Moreover, the most popular option is class 32 laminate, since it is this material that has the best value for money. Its thickness is 8-10 mm, and the service life is 15-20 years.

Most manufacturers pack the material in a polyethylene film that has shrink properties. The material packed in a film keeps within in cardboard boxes.

Film packaging is good in that it reliably protects the laminate from moisture and dirt, but it does not prevent the buyer from seeing the appearance of the coating. Each pack must have a label that contains information about the properties of the product. The label must indicate:

name of the manufacturer's company;
wear resistance class;
weight of packing;
the number of items in the package;
area of one element;
code and consumer name of the decorative design of the material (“beech”, “cherry”, etc.).

How many boards are in a pack?

thickness of laminate lamellas 32 class 8-10 mm;
the length is 1220-1380 mm, however, some manufacturers produce lamellas of longer lengths;
the width depends on the type of material, it can be one- or two-lane, so the width ranges from 90 to 330 mm. However, the most popular width option is 185 mm.

Thus, the weight of the pack is influenced by such parameters as:

dimensions;
thickness;
the number of items in the package.

Advice! The weight of one package of laminate, as a rule, is in the range of 12-17 kilograms.

Why do you need to know weight?

Not all consumers understand why it is necessary to know the weight of the laminate. What can this parameter affect, except for loading and unloading operations? It turns out that the weight of the coating can affect the strength of the main structures of the house. It is very important to take into account the actual loads exerted on the supporting structures of the house, so the weight of the coating must be known.

In addition, heavier, which means thicker panels are more durable and more reliable locking connection. The wider the lock, the easier it will be to assemble the coating, which from the outside will look like a solid surface without visible joints.

You must log in. to leave feedback.

Home / Preparation / How much laminate is in a pack? The size and weight of a pack of laminate.

How many laminates are in a pack? The size and weight of a pack of laminate.

Why is it so important to know how many square meters of laminate are in a pack? During renovation work, the final load is always on the flooring. To extend its service life, a substrate is laid under the laminated panels. and also resort to the use of self-leveling compounds that can level any irregularities. Before buying lamellas, it is necessary to calculate the amount of material needed. Knowing the total figure in m. As well as the volume of the package, you can calculate the number of packages.

Just in case, stock up on extra packing of boards, because no one is immune from wear, breakage and other damage to the panels, which are easy to fix.

Laminate pack weight

The size of a pack of laminate is determined by the size of the boards. These rectangular objects, like any other geometric bodies, have their own height, length and width. In the acquisition process, these are exactly the indicators that you need to pay special attention to.

It is also an indicator of the thickness of the boards. The thinnest options are 6 mm, the thickest are 12 mm. According to experts, the best option is 8 mm. Today, such strips are produced by all manufacturers of laminated coatings. These thick boards have much better features, including:

They are characterized by smaller deviations in size;
the floor installation process is simpler;
they conduct heat worse, which means the base is warmer;
they do not leave traces of furniture.

As a rule, the length varies from 126 to 138 cm. These are standard sizes. Of course, there are special exceptions, but they are rarely used. Sometimes you can find boards with a length of up to 185 cm. Yes, it is very difficult to work with such panels, because the installation process can only be entrusted to specialists. In addition, it is quite difficult to align the base under them.

Before making a final choice, explore the room. If it is spacious enough, take the material more authentic. In the case when it is small, do not use overall lamellas.

Narrow stripes imitate a real parquet board. Their width is usually 9 cm. There is also an excellent imitation of ceramic tiles with a width of 33 cm. But, the most popular option is still considered to be a width within 18.5-19.5 cm. This size makes the floor more natural.

How much does a pack of laminate weigh? It all depends on the manufacturer. On average, from 15 to 17 kg - the weight of a package measuring 2-2.5 m? or in other words 8 pieces per pack. The length of one board is from 110 cm to 120 cm, width - 15 cm to 20 cm.

Keep in mind that it is difficult to say the exact weight, because it all depends on the manufacturer. There are separate varieties of slats that differ in almost identical width and length parameters, such as Quick-StepArte (624 mm x 624 mm) or Quick-Step Quadra (394 mm x 394 mm). But, there are also species with completely different parameters. Take the same brand - Quick-Step Majestic Pro or Quick-Step Largo. The most accurate weight is always indicated on the end of the package with slats.

You can do preliminary calculations at home, but in fact it can be done for you in a specialized store. The main parameter that you must provide is the area of \u200b\u200bthe room. The main parameters that sellers will take into account are weight, number of pieces, height, length and width values.

How many laminates are in one pack?

The area of a pack of laminate from 1.85 m? up to 2.05 m? (8-10 boards). So for laying in a room with an area of \u200b\u200b12 m? 6-7 packs are needed. Remember that the material should be taken with a small margin in order to save several boards for the future, because even an experienced craftsman can damage 1-2 boards during the installation process.

It would be completely wrong to say that there are 8 strips in any package. How many pieces of laminate are in a pack? It all depends on the manufacturer. Note that there are a lot of different variations. Let's look at the sizes of laminate from different manufacturers.

First, let's evaluate the offers of manufacturers whose package sizes depend on the collection.

Superior - 1380 x 193 mm (qty - 8);
Grunhoff - 1380 x 193 mm (col. - 8);
Premier - 1380 x 193 mm (qty - 8);
Home - 1380 x 193 mm (qty - 8);
Salzburg - 1380 x 193 mm (col. - 7);
Prime line - 1380 x 193 mm (col. - 9).

Castello - 1285 x 192 mm (col. - &);
Kronofix - 1285 x 192 mm (col. - &);
Quick Style - 1285 x 192 mm (qty - 7);
Comfort - 1285 x 192 mm (qty - 10).

Super Natural Classic - 1285 x 192 mm (col. - &);
Variostep Classic - 1285 x 192 mm (col. - &);
Vintage Classic - 1285 x 192 mm (col. - 7);
Floordreams Classic - 1285 x 192 mm (col. - 6);
Kronofix Cottage - 1285 x 192 mm (count - 10);
Kronofix Classic - 1285 x 192 mm (qty. - 10);
Vintage Narrow - 1285 x 123 mm (col. - &);
Variostep Narrow - 1285 x 123 mm (col. - 12);
Super Natural Narrow - 1285 x 123 mm (col. - 12);
Castello XL Stoneline - 1276 x 327 mm (col. - 6);
Stone Impression Classic - 1285 x 327 mm (qty. - 6);
Variostep Long: - 2000 x 192 mm (col. - 6);
Castello Wide Body - 1285 x 242 mm (count - 8);
Variostep Wide Body - 1285 x 242 mm (col. - 8);
Super Natural Wide Body - 1285 x 242 mm (col. - 8).

Quadra - 394 x 394 mm (qty. - 10);
Arte - 624 x 624 mm (col. - 4);
Creo / Go - 1200 x 190 mm (qty - 8);
Classic - 1200 x 190 mm (qty. - 8);
Clix Floor - 1200 x 190 mm (col. - 8);
Rustic - 1200 x 1234 mm (col. - 12);
Exquisa - 1224 x 408 mm (col. - 2);
Lagune - 1380 x 998 mm (col. - 12);
Eligna - 1380 x 156 mm (col. - 8);
Elite - 1380 x 156 mm (count - 8);
Perspective - 1380 x 156 mm (count - 7);
Country - 1380 x 156 mm (col. - 7);
Vogue - 1380 x 156 mm (col. - 7);
Eligna Wide - 1380 x 190 mm (count - 8);
Perspective wide - 1380 x 190 mm (qty. - 6);
Colonial - 2050 x 156 mm (col. - 6);
Largo - 2050 x 205 mm (col. - 6);
Majestic Pro - 2050 x 205 mm (col. - 6).

Vintage - 1292x 194mm (qty - 8);
Legacy - 1292x 194mm (qty - 8);
Woodstock Premium - 1292 x 194 mm (qty - 8);
Woodstock - 1292x 194 mm (qty - 8);
Robinson Premium - 1292 x 194 mm (qty - 8);
Revelation - 1292x 194mm (qty - 8);
Holiday - 1292x 194 mm (qty - 8);
Fiesta Cool - 1292 x 194 mm (qty - 8);
Playstyle 832 - 1292x 194 mm (col. - 8);
Jungle 832 - 1292x 194 mm (qty - 8);
Select - 1292x 194 mm (qty - 8);
Lamin'Art 832 - 1292x 194 mm (col. - 8);
Polaris Style - 1292 x 194 mm (qty - 8);
Oak Art - 1292 x 194 mm (col. - 8);
Intermezzo - 1292x 194 mm (col. - 8);
Cozy - 1292x 194 mm (qty - 8);
Artisan - 1292x 194 mm (col. - 7);
Infinite - 1292x 331 mm (qty - 6);
Lamin'Art - 832 - 1292 x 331 mm (col. - 6);
Eden - 1292 x 192 mm (col. - &);
Sublime Style - 1292 x 136 mm (col. - &);
Liberty - 1292x 159 mm (col. - 7).

Country– 1215 x 143 mm (qty - 8);
Villa - 1212 x 142 mm (qty - 8);
EPI - 1290 x 192 mm (col. - &);
HDM - 1294 x 185 mm (qty - 8).

Megafloor M1 - 1292 x 193 mm (qty - 10);
Spirit - 1292 x 193 mm (qty - 10);
Floorline Classic Solution - 1292 x 193 mm (qty - 10);
Megafloor M2 - 1292 x 193 mm (qty - 8);
Floorline - 1292 x 193 mm (qty - 8);
Floorline Classic Country - 1292 x 193 mm (qty - 8);
Floorline Classic Universal - 1292 x 193 mm (qty - 8);
Megafloor M2 Block - 637 x 330 mm (qty. - 8);
Floorline Block Modern - 637x 330 mm (qty - 8);
Laneo - 1292 x 193 mm (col. - 7);
Floorline Kingsize - 1292 x 326 mm (qty - 6);
Floorline Classic - 1292 x 193 mm (qty - 6);
Floorline Classic Business - 1292 x 193 mm (qty - 6);
Floorline Medium Compact - 1292 x 134 mm (qty - 6);
Classen - 1290 x 194 mm (col. - 9).

There are manufacturers whose all lamellas (regardless of the collection) are the same size. These include:

Alloc - 1207 x 193 mm (qty - 8);
Balterio - 1261 x 189 mm (col. - 8);
BerryAlloc - 1285 x 186 mm (qty - 8);
Bode - 1210 x 165 mm (qty - 10);
Parador -1285 x 400 mm (column - 5);
Pergo - 1132 x 283 mm (col. - 6);
Premium - 1212 x 193 mm (qty. - 8);
Proteco -1210 x 193 mm (qty. - 8).

Family - 1285 x 192 mm (col. - &);
Classic - 1285 x 192 mm (col. - &);
Rustico - 1285 x 192 mm (col. - &);
Fashion - 1285 x 192 mm (col. - &);
Valentino - 1285 x 192 mm (col. - &);
Castello Classic - 1285 x 192 mm (col. - &);
Bellissimo - 1285 x 192 mm (col. - &);
Sublime - 1285 x 192 mm (col. - 7).

Each manufacturer attaches instructions with similar characteristics to the packaging. Also there is a special insert, how exactly to mount the boards. Knowing how much laminate is in a pack of a particular brand, you can still calculate the required amount of material for the room at home.

Video - a master class on laying laminate.

How many pieces in a pack of laminate

The question of how many square meters in a pack of laminate can be called one of the most important among those that arise from homeowners during the purchase of materials intended for repair work.

Calculation of the material required for laying a new floor

When purchasing any materials for repair or construction, one should not act rashly. Knowing that the most popular among consumers is a laminated board with a thickness of 8 mm, you need to find out what determines its weight and what is the number of constituent elements in one pack.

Usually each pack contains 8 components with a laminated coating. The mass of such a package depends on many parameters.

The most popular laminate - 32 grades

The most popular and in demand can be called class 32 laminated material, which is widely used to create a finishing floor covering in both residential and office premises.

Its length reaches 180 cm, width - 20 cm, and thickness - 8 mm. However, there are also elements that are designed for use in areas with high traffic and in order to withstand fairly high loads, they have an additional protective layer. Accordingly, the thickness of such lamellae increases, which means that each product becomes a little heavier. The weight of the packaging of the laminate, which is characterized by increased resistance to abrasion, also increases.

Type 33 laminate and type 32 laminated panel differ in their weight, and if each slat is 40 cm wide, 8 mm thick and designed to mimic a tile floor.

Extra components may not always come in handy either, but it’s still better to have a few items in stock in case of damage during installation.

Why is weight so important

The weight of the laminate is important when calculating the load on the subfloor

You can get the most complete information about such a load by knowing how many packages are needed and how much a pack of each type of laminate weighs.

You will need information about:

how much laminate in a pack;
what class (32 or 33) lamellas are in the package;
what are the parameters (length, width, thickness).

The number of laminate sheets per room can be calculated from the width of the slats

This is the most important information that allows you to understand not only the weight of the laminate, but also what area can be covered with a given amount of purchased material.

32 and 33 types of laminated products differ significantly in their parameters and weight.

Some very well-known manufacturers put not 8, but 10 or even 12 lamellas in a box. How much laminate is in one package affects a significant and noticeable change in weight.

Laminate flooring that has been laid using class 33 products is highly resistant to various types of damage, and a certain number of slats in a package with type 33 products will weigh more than that amount of type 32 laminate.

This is due to the application of an additional protective layer, a change in thickness.

Calculation of the required number of slats

Speaking about the load, it is worth paying attention to the fact that the exact mass of each of the pieces and the entire box as a whole cannot be determined independently. It is better to trust the manufacturer and get the necessary information by looking at the end of the box in which the selected product is located.

How to start laying laminate flooring

Laying laminate on foam

Door lining with laminate

Calculation of the required amount of material and how to find out how much a laminate package weighs

The choice of finishing material is not an easy process; it takes a huge amount of time not only to assess its technical abilities, but also to calculate the required amount of building material for work. It is also important to calculate how much the packaging of the laminate weighs, this affects both the delivery of the product and the construction of the house as a whole.

Length, width and thickness - only the weight is missing

We study the weight of the panels

The main specific gravity of the laminate depends on what the laminated panel is made of, not the top protective layer in combination with the back film, but the "core". In most cases, for rooms with medium and high traffic, a wood-fiber base is used, in rare cases, MDF is used.

Of course, do not forget that the thickness of the material is not the last indicator.

For example, if we consider a laminate whose length is 128 cm, width 21 cm, thickness 12 mm, and there are only 6 such panels in the package, then from the total weight of the product, we can calculate the weight of each panel separately:

The total weight of the moisture-resistant laminate package is 17.4 kg - that is, by dividing this number by 6 (the number of pieces in a pack), we get the number 2.9 - which is the weight of each product.
From the resulting amount, we subtract a few more tens of grams per packaging material - that, in fact, is all the arithmetic, the weight of a 12 mm laminate is 2.85 kilograms.

The same approximate package weight (17 kg) can be used not only for moisture-resistant products, 8 mm laminate is sold in the same weight volumes, only the number of panels increases.

For your information! There are packs with more than 20 pieces.

As for calculating the weight of 1 square meter of flooring, in the case of a 12 mm laminate (from the example described above), it turns out:

With a length of 128 cm and a width of 21 cm, 4 panels will be spent per 1 square meter (we translate centimeters into square meters): 0.2 times 1.28 and we get 0.24 m2.
Now we multiply the result by 4 and get 0.96 m2 (as close as possible to a whole square meter). From this we conclude: in 1 m2 - 4 laminated panels, where the weight of each is 2.85.
Next step: multiply 4 by 2.85 and get the weight of 1 m2 of laminate approximately 11 kilograms.

Laminate weight 12 mm - on some packages everything is already indicated in detail

In fact, the class of the product also affects the weight of the laminate, that is, in order to calculate the maximum load on the floor that will occur after laying the finishing material, all parameters should be taken into account: thickness, class and dimensions.

Note! The weight of a pack of laminate is usually indicated on the brochure enclosed in the package, so to make the necessary calculations, it is enough to find out the number of panels and divide by the total weight.

Why is it important to know the weight of the finishing material

When building a house, especially at the stage of building a foundation and building a floor, the question often arises - what will be the load in the end result? And since the flooring will be laid out from laminated panels, it would be right to find out how much the laminate and the substrate under it weigh.

Advice! Even if you lay the foundation of the house with a margin for actual loads, that is, calculate the weight from the maximum allowable rate (although this is costly in terms of materials), the probability of unforeseen shrinkage of a separate part of the house is high. After all, it is necessary to take into account such criteria as: precipitation, furniture, number of people, material wear, soil density - if this is also allowed, then the foundation will cost a pretty penny.

How to calculate the required amount of laminate flooring

We have already answered one of the questions, now you know how to calculate the weight of a 1 m2 laminate in a residential area. Moving on to the next problem, how many packs of flooring do you need?

The most important indicator is the installation method, since there are several of them, we will consider the most popular:

Longitudinal laying of laminate

Important! Regardless of how much a pack of laminate weighs and how many panels it contains, in the first place, it is worth remembering that 5-10% of the rejects are added to the total working area.

For example, a living space of 20 m2 needs to be ennobled and a laminate floor should be laid on the floor. Before the calculations begin, add to this number 5% (if you are confident in your abilities) of marriage, that is, it will turn out that in fact you will need to purchase material for 21 m2.
We look at the dimensions of the panels and their number in the package (we use the example with 12 mm laminate from the first example), we get: in one pack there are 6 products with dimensions of 128x21 cm.
As we remember, one panel is 0.24 m2. now we use the “power” of multiplying by 21 m2 and as a result we have 87.5 (approximate number) pieces. This is the total number of panels required to lay the flooring.
The final touch: we divide 87.5 by 6 (pieces in one package) and get the number 14.58 (actually 15) - this is the required number of packages for ennobling 20 m2 of housing.

Note! Knowing the weight of one package of laminate - 17 kilograms. you can calculate the total weight, multiply this number by 15 and get 255 kilograms. You will need a truck to deliver the laminate.

Diagonal styling

The calculation is carried out according to the same scheme as in the longitudinal laying, only not 5, but at least 10% is added to the marriage, at best, if you have never encountered finishing work, add 15%.

An interesting solution - laying the laminate diagonally

Surface preparation

It should be remembered that the most important thing when laying laminated panels on the floor is its flat surface, which will avoid any nuances in the future.

For this, a cement-sand screed is poured onto the concrete floor. Several features:

The room is divided into 3-4 parts. to make it easier to mount the screed.
To maintain the horizontal level, pre-mounted beacons are used. The photo shows an example of how they can be installed.

The metal profile is fixed with cement according to the specified height

The most important tool in laying a cement screed is the rule, therefore, the better and smoother it is, the more effective the result will be.

Laying laminate

Work starts from the corner of the room.

Lay in the direction of the sun - the ends of the laminate will not be so conspicuous

The panels are attached to each other in three ways: with the click and lock locking systems (the technology instruction is included in the packaging with the laminate) and with the help of special glue.
For a more even sawing of the laminate, use a jigsaw, if it is not available, rent it at a hardware store. The price of such a "bonus" is not high, but the speed of work is doubled.

This is what you should end up with

Problems with laying the finishing material should not arise, but if someone is interested or something is not clear, then you can watch the video: mounting laminated panels on the floor. We hope that the article was useful to you.

How much does a pack of laminate 32 class 8 mm weigh

When buying a laminate as a floor covering, the homeowner chooses a modern material that meets the requirements of safety and endurance to factors such as: light, moisture, temperature rise, mechanical damage. Having decided on a specific brand and the color and texture you like, it is equally important to know how much the laminate package weighs.

Why you need to know the weight of the laminate packaging

Secondly, the total weight of the floor material is important when building a house, when the foundation is being erected and concrete floors are being constructed for the floor. This raises the question of the load on the base of the building, in which it is necessary to take into account many factors, including the weight of the floor material. If a laminate is chosen, for example, 32 classes with a panel thickness of 8 mm, then you need to find out how much one such package weighs. Multiplying this number by the number of packs, we get the total weight of the coating.

The structure of the laminate board

How much the floor covering will weigh depends on its structure, and specifically, on the “core”, the composition of the carrier layer. Laminate is a modern flooring material with remarkable characteristics: hardness, wear resistance, impact resistance, thermal resistance and others.

It consists of 4 main layers, although some manufacturers may add an additional, fifth level:

The top layer protects the entire structure from mechanical shock and damage, gives the material heat resistance and light resistance. It is made from melamine resin. The strength of the coating is directly related to the thickness of the layer, but this does not affect the weight of the laminate package.
The next layer gives the appearance, carries the pattern of the flooring, it can imitate natural materials: wood, granite, stone, sand, marble and even the skin of exotic animals.

The middle or carrier layer is the basis of the panel, which determines the thermal insulation, the resistance of the laminate to moisture, and more. This part of the board is made from fiberboard. Locking mechanisms are also located here, their strength is due to the thickness of the panel.
Stabilizing, the bottom layer creates the rigidity of the board, protects against deformation. This level contains all information about the coating, its parameters, class, characteristics and other details.

Some manufacturers also create additional levels. For example, a layer of microparticles of aluminum dioxide or corundum can be added under the upper layer to increase the strength of the coating, and another part can be applied from below to enhance sound insulation.

The main weight of the laminate board falls on the carrier layer, the heavier it is, the heavier the lamella will be. It is made from wood dust, which is impregnated with resins under high pressure and, when solidified, becomes extremely hard and rigid. HDF is a board with a high density value, MDF is a medium one. But such a characteristic as density can be indicated on the packaging. Instead, the certificate contains the thickness of the laminate panel, the weight of the pack and the area of coverage.

Laminate board dimensions

The thickness of the panel can vary from 6 to 12 mm. Professionals generally prefer the 8mm and 32 grade. It is believed that such boards have the most convenient characteristics. They are easier to install and warmer to operate, as they have low thermal conductivity.

The length of conventional panels ranges from 126 to 138 cm. But there are exceptions, only professional installers can install boards of non-standard size up to two meters. The choice of the length of the laminate panel depends on the room. Long boards are suitable for a spacious room, and short boards are chosen for a small area.

The last indicator of the laminate package size is the weight, which can also vary depending on the manufacturer, the number of boards, the wear resistance class and other coating parameters.

Therefore, when buying a laminate, it is worth choosing a product of a single brand, because panels of even the same class and similar sizes from different manufacturers may not match the parameters of the locking mechanisms, color shades and quality.

Weight of individual panels and laminate packaging

Different types and classes of panels have sizes that differ significantly from each other. One package with such material can weigh about 15-17 kg. The most famous and common type of laminate has packs of 16 kg. Data is printed on the front side, where the manufacturer indicates how much 1 m² of laminate weighs in a package. So you can calculate the total weight of the floor cladding per area of a particular room. This is necessary to know for old houses with worn floors.

How much a pack of laminate weighs depends on the number of panels and on the square meters marked on the end of the box. For many brands, this is 7 to 10 stripes and 1.5 to 2.5 m². Some well-known manufacturers pack high-quality material in two boards.

Affects the weight of the laminate panel and the wear resistance class. According to him, the thickness of the board can be from 8 to 12 mm. Of course, the weight of the package of the most common class 32 laminate with a thickness of 8 mm will be less than a coating of a similar level, but with a thickness of 12 mm. On average, it ranges from 12 to 17 kg, depending on the number of panels in a pack.

How much laminate do you need to buy

What else to read

How to remember people? Effective ways. Remembering faces If you want to be remembered How to improve your memory: effectively remembering faces and names I must admit that I myself do not always...

Windows: Automatic logon (autologin) If you're running Windows 7 on your personal computer, you'll often need to confirm your login (by...

Standard photo sizes A photograph is one moment of life that remains in memory for many years. No matter what happens, but when you take...