Bird trills delight the soul, and a slight swaying soothes. Garden swings at their summer cottage are needed not only for children, but also for adults. Moreover, it is absolutely not necessary to buy the same type of model, covered with fabric. It is much more interesting to create an original designer thing on your own. How to make a garden swing with your own hands? What is better to choose for the frame, metal or wood? Tips from experienced craftsmen, drawings, a selection of photos and video instructions - in this review.
As a child, it seems that the "winged swing" is able to reach the sun. Growing up, we remember this wonderful feeling of carelessness. And subconsciously we want to repeat it. This is quite possible, because the swing is not only for children:
According to the manufacturing method, the swing is divided into:
By installation method:
The frame can be made from a number of materials and their combinations:
Before proceeding with the construction, it is necessary to determine the purpose of use and the material of manufacture. If a baby needs a swing up to 3 years old, then a purchased or home-made stationary, stable option is suitable. For children from 5 years old - light plastic or wooden hanging swings. They can be attached to a canopy beam in front of the house or to a powerful tree branch. A noisy children's company will appreciate the entertainment in the form of a balancer (pendulum).
Attention! The most durable are products made of processed wood and metal. For "wintering" it is enough to cover them with polyethylene. Purchased swings with a plastic base covered with fabric - must be disassembled for the winter and stored in a dry, warm room.
If you want the garden swing to serve not only as a place of rest, but also as an accent detail of landscape design, then you can prefer noble forging or eco-friendly wood design.
For the older generation, durable benches with a high back and a canopy are ideal. For noisy youth - swinging sofas with a lot of colorful pillows or hammocks for relaxing with a book.
A swing that any beginner can make from improvised materials. For manufacturing, you will need a car tire, a strong rope and the ability to knit marine knots.
Installation steps:
Such installation will not take much time, but will bring a lot of joy to children.
The easiest swing to make, which does not require special skills and materials, is a beam suspended on a rope.
Attention! A wooden swing without a back is unstable, so it is recommended to build them for children from 7 years old. If you want a swing with a back, you can cut off the legs of a wooden chair and attach it with a rope to the base and back.
For installation you will need:
Walkthrough:
The fastening feature guarantees the strength of the structure. At the bottom, the rope will not untie and will not fray.
Evening conversation on a bench swaying steadily promotes mutual understanding. And if you decorate the wooden frame with cute pillows, then a comfortable stay is guaranteed!
Advice. The thickness of the planks for the seat of the swing bench should be greater than for the back.
Before construction, you need to prepare everything you need:
Action plan:
A properly built structure will be solid and reliable, and will last for several seasons.
You may want to hang a swing bench or a pair of children's plank rails on chains. The main thing is to mount a reliable base that can withstand both a small load and several adults.
For construction work, the following elements are required:
Advice. The part of the bars intended for digging into the ground should be treated with bituminous varnish or resin.
Step-by-step instruction:
Any kind of swing can be attached to such a base using rings, a carabiner and a chain.
The safety of the swing directly depends on the type of suspension. Rope is a fairly strong option, especially if it is secured with a marine knot. But over time, it can stretch or fray. Therefore, such a suspension is recommended only for children's swings that are not subject to heavy loads.
Attention! The optimal rope is kapron with a cross lay from 24 mm.
The chain is a more durable option that can withstand heavy loads.
Advantages of using a metal chain:
Garden swings are not just a place of rest, but also an original "highlight" of any site. A rational choice of design, construction taking into account all the nuances and careful maintenance will provide the swing with a “long life”.
What do children do in their free time on the street? Run and play, build a house out of sand, ride a bike, kick a ball. And many kids enjoy spending time on the swings. They are very fond of rising and falling sharply. Such a swing can be made with your own hands, using improvised material for this.
For several centuries, swings have remained a popular attraction, not only for children, but also for adults. Not a single folk festival in Ancient Russia was complete without “flights” on these devices. During the Russian Empire, they were both among the poor and the rich. Naturally, they looked different: the poor swung on ordinary wooden boards tied to poles with ropes, while the swings of the rich were decorated with decorative elements, pillows, bows and ruffles. In our time, interest in them does not fade away, they can also be seen on courtyard grounds, in many children's organizations, in country "residences".
You can make a swing with your own hands, using almost everything that is at hand for this.
Material type | Advantages | disadvantages |
Wood |
|
|
Metal |
|
|
Plastic |
|
|
Wooden swings require careful antiseptic treatment and surface grinding
The strength and reliability of metal structures no one disputes
Plastic children's designs can be purchased ready-made, but they are only suitable for babies.
Some craftsmen can make swings from other materials, using car tires, plastic pipes, wooden pallets, etc. Even snowboard boards, skateboards and other non-standard materials, such as an old basin, can be used.
Creating a hanging swing will not take much time
In skillful hands, even a snowboard can become a useful element of a children's swing.
Older children like non-standard solutions, for example, tire swings
The role of the seat can be performed by an old roomy basin
According to the design features, the swings are:
Age preferences for frame-type swings are children from 3 to 10 years old. Such structures have a great advantage - mobility. They can be placed in any area of \u200b\u200bthe summer cottage or playground. They are strong enough to support the weight of primary school children.
Suspended swings are attached to the beam-beam. To do this, you can use chains, ropes, ropes. Their reliability increases with the use of a strong crossbar and subject to proper fastening.
Floor structures can be used by children under 5 years old. Most often, when creating them, plastic and metal parts are combined.
For very young children, you can make a rocking chair-transformer, which combines several elements at once:
The modern world cannot be imagined without electronics. There are swings equipped with a special system, which may include:
They should be purchased only if your family has a newborn child.
Frame swing 0 common type of structures
The design of the floor swing provides for their transfer to any suitable place
Good and comfortable for children in a hanging swing with a back
Electronic swing suitable even for crumbs
Swings, despite similar functions, may differ slightly from each other. This is due to the design of these structures, and their principles of operation.
Which adult does not remember such rides as boats? This type of swing can be used to entertain both children and their parents.
There are several types of children's structures, designated by one concept - a swing-balancer. Such devices include swings:
Such fun fun is suitable even for small children. With the support of an adult, a one-year-old baby can also ride on a swing.
In our time, manufacturers of children's structures offer a rich variety of spring devices for swinging with balancing.
Of course, swings can be purchased at the store, but it’s better to work hard and build the swing yourself. Years will pass, but your child, who has already matured, will definitely remember the minutes of “ups” and “falls” on the swing that you made with your own hands.
"On the seas, on the waves" - the motto of the design for children in the form of a boat
Sitting on the plane, you can feel like a real pilot
Such a ladybug will not take your child to heaven, but it will help to have fun
Springing, sitting in a helicopter, will appeal to all the kids
If you decide to build a children's swing yourself, then you should do the preparatory work:
The simplest swing design is suspended. You can make them completely wooden or combine different materials. For hanging elements, metal chains, ropes, a strong cord, parachute lines or a rope are most often used.
As a seat, it is best to use a polished board, because it is comfortable, does not crack in the cold, and will not cause discomfort to the child in the heat and cold. You can use improvised means - old seats from chairs, armchairs, etc.
If you have more than one child or guests with children often come to you, then you can make a balancer for two. They are made from different materials. The advantages of metal swings are in their strength, but for an independent construction of such a design, you will need a good welder. Wooden swings are easier to make and less dangerous to use.
It is easiest to make a hanging swing with a metal support and a wooden swing-balancer.
The materials you will need are:
For the swing-balancer, prepare:
You can facilitate the work of making a swing by drawing up a design diagram. Drawings are made independently (for individual parameters) or are taken ready-made from various sources.
The design of the swing must be very stable
Based on the drawn up scheme, you can build a frame swing made of wood
Be sure to indicate the dimensions of each part on the diagram.
Depending on which design you prefer, you need to prepare:
Having prepared everything you need, you can get to work:
There is another reliable way to fasten the supports and the crossbar - by welding a special design (this option is very suitable for connecting wooden structural elements).
In the central part of the crossbar, bearings are attached using metal plates. The bearings must ensure the movement of the swing in the forward / backward direction. The next steps are:
The condition of the swing should be carefully monitored. It is necessary to regularly lubricate the bearings with machine oil and tint shabby parts.
Before you invite the kids to ride, try the swing yourself.
Based on the drawings made and armed with the necessary materials, tools, you can begin to assemble a wooden swing-balancer. The work is carried out in 4 stages:
The base is the basis for the reliability of the design for children. This swing element can be built from a wooden beam (10x15 cm), a log (20 cm), boards (not thinner than 3 cm), fixing them in the intended place of the future swing. A lower frame about 1 m long is constructed from wood and vertical supports or racks are attached to it (using self-tapping screws) at an angle.
The rocker-balancer is easiest to make from a bar or a thick board.
For the entire length of the balancer (up to 2.5–3 m), 2 beams are laid parallel to each other, shorter beams (up to 1 m) are placed between them (on both sides). The entire structure obtained is fixed with screws or waterproof glue (for carpentry). You can use one board.
At the edges of the rocker, seats with handles are made, in its central part there is a hole for a profile pipe.
Handles, like all other wooden parts, must be perfectly smooth so that the child does not drive a splinter into the skin.
The assembly of the rocker arm and the base is carried out using two pipes: a support pipe and a segment mounted in the center of the swing. They are combined, a steel rod is inserted into pre-drilled holes on both pipes.
After the swing is mounted, you need to take care of their appearance. The easiest way to paint them with oil paint. This method is suitable for both wooden and metal structures. You can dream up and make the swing especially attractive for kids.
Do not neglect the rules for using a children's swing, which will help to avoid injuries. It is forbidden:
Before operating the swing, it is necessary to carefully inspect all nodes and connections for their integrity and functionality. Regularly lubricate the swing, preventing the appearance of rust and creaking. Make sure that there are no sharp objects, protruding bolts, unsanded wood sections in the structure.
Making a swing with your own hands is easy. The main thing is to adhere to the manufacturing technology of the product and the recommendations of specialists.
Returning to a carefree childhood, we remember sunny days, a shady garden and a swing. They gave us the joy of flying and served as a secluded corner for a relaxing holiday.
It is not difficult to return forgotten impressions, to please yourself and your loved ones. Make a garden swing out of wood, and it will become a favorite pastime for children and a relaxing place for adults.
In this article, we offer an overview of the different types of wooden swing structures. After getting acquainted with them, you can choose the most interesting option for self-production.
The classical form of a garden swing is known to all. These are two inclined racks connected by a transverse beam to which a bench is suspended. To create an "all-weather" option, a canopy is made over the structure. Further, a wide field for creativity and imagination opens up.
Wooden outdoor swings can be made from tree trunks and branches peeled from the bark. This will give them the charm of the popular rustic style.
Instead of two inclined posts, a wooden frame consisting of a crossbar and two vertical posts can be used as a base. To ensure stability, it is placed on wide supports, reinforced with braces. In the photo below we see a similar installation.
In this example, the unusual way of fastening a bench assembled from thick boards and branches attracts attention. It is suspended not from the upper crossbar, but from two round bars cut into the racks.
Another interesting option is a swing without a canopy, made of logs. They look great due to their simplicity and aesthetics. In addition, this design is equipped with a ladder, which will be additional entertainment for children.
Anyone who finds beauty in the strict geometry of forms works with a bar and a board. The photo below shows a support structure resembling a "goat" for cutting firewood. It is successfully complemented by the original bench on chains.
In order to create something beautiful and unusual, it is not necessary to do this by complicating the design. It is enough to slightly change and refine the standard project, eventually getting such a wonderful thing that will perfectly fit both on the terrace and in the open air.
Looking at another solution, you will agree that the canopy over the swing is a practical and beautiful element. It is made of boards laid with an overlap.
To assemble the bench, you can do without the use of complex parts. It can be very simple and at the same time comfortable and beautiful.
Taking a couple of scraps of slab for work and carefully processing it, you will get an excellent result. By adding decorative side puffs to the design and rounding the roof overhangs, you will significantly improve its appearance.
Children like swings with not one, but two chairs. You can ride them in any rhythm without disturbing your neighbor.
There are many interesting uses for wooden pallets. One of them is a comfortable bench with a high back for a swing installation. Such a seat can be successfully attached anywhere: on the veranda, and in the gazebo, and even on the trunk of a large tree.
Fans of country style can implement it in the design of a homemade swing. To do this, it is enough to cover the log frame with a light canopy of reed or straw.
A beautiful canopy can be built from cellular polycarbonate or ondulin. These materials are easy to work with and easily bent to a given radius.
As a decoration, openwork lattices made of thin rails, mounted on the side racks, are suitable. Bent wood elements will give the design a special charm and charm.
Noteworthy is the design, in which an awning made of dense fabric is used to protect from the sun. The hard seat and back are covered with a large soft mattress.
Having made such a swing yourself and not wanting to mess with the roof, you can buy or custom-make an awning for every taste and color.
A classic installation of two pairs of inclined beams with a crossbar is not the only possible solution. There is a more comfortable option. This is a gazebo with a swing.
It looks great and protects well from the rain. It can be used not only in summer, but also during winter thaws.
Lovers of soaking up the fresh air are not satisfied with a narrow bench. They prefer a wide, comfortable "bed" that swings smoothly on chains. In the photo below we see an example of such a design.
This is a light canopy without a roof (pergola). A wide bed is suspended from the wooden beams of the ceiling at four points.
Deciding to make a wooden swing with your own hands, take a simple design as a model. It will turn out to be reliable and will not require professional carpentry skills from you to join parts.
Consider the sequence of assembling a garden rocking chair from logs, branches and slabs.
Before starting work, you need to pick up even tree trunks or logs of small diameter (up to 15 cm). They will go to the manufacture of sidewalls. The length of the material must be at least 2 meters. After that, you need to make a sketch drawing. It indicates all the dimensions and methods of connecting parts.
Attention! When calculating the length of the sidewalls, the distance between them and the height resulting from their combination, it is very useful to recall the school curriculum, namely the Pythagorean theorem for a right triangle.
Our design conditionally consists of two such right triangles, where there is a hypotenuse (the long side opposite the right angle) and legs (sides forming a right angle).
The theorem goes like this: In a right triangle, the square of the hypotenuse is equal to the sum of the squares of the legs.
A graphical representation of this theorem is shown below.
The manufacture of the frame begins with the sidewalls. On the logs mark the places of the connecting cuts. Then, with a hacksaw and a chisel, the wood is selected and holes for the tie bolts are drilled.
In the lower parts of the supporting legs, grooves are cut out for installing side puffs. You can attach them to the racks without cutting, "overlapping". However, such a connection will not be rigid enough.
The next step is the installation of a crossbar (crossbar) from a log. To do this, the sidewalls are set vertically and fixed with temporary ties. Having laid the crossbar on the forks of the racks, it is fixed to them with screws through steel corners.
To increase the rigidity of the frame, it is reinforced with jibs. They can be made from thick branches or scraps of timber.
Having assembled the frame, proceed to the manufacture of the bench. Its supporting base, to which the boards of the backs and seats will be attached, can be made from a profile pipe. Without good carpentry skills, it will be difficult to assemble such elements from wood.
Having cut the pipe according to the dimensions of the drawing, the segments are welded end-to-end and holes are drilled in them for fastening the boards. To hang the bench at the upper and lower ends of the profile pipe, steel rings are fixed by welding. Chains with carabiners will be attached to them.
In the crossbar, through holes are drilled for the eyebolts.
Under the nut tightening the mounting bolt, you need to put a steel washer with a diameter of at least 6 cm and a thickness of 3-4 mm. To prevent loosening on the nut, screw the lock nut on and tighten it firmly.
We recommend using carabiners for fast attachment and convenient adjustment of the length of the chains. They are alternately brought into the rings of suspensions. After that, check the evenness of the installation of the bench. If necessary, adjust its position by adding or reducing the number of free links.
For more reliable fixation, a wooden swing can be buried in the ground. To do this, dig holes 20-30 cm deep, install the ends of the racks in them and fill them with a mixture of crushed stone and sand. To protect against decay, wood in contact with the ground must be carefully treated with an antiseptic.
From above, the swing can be covered with a light canopy. To do this, two thick branches are screwed to the upper ends of the racks with self-tapping screws. Several boards are attached to them and covered with slate, reed or metal tiles.
Do-it-yourself garden swings are easy to make if you know how to handle tools. All work can be completed in one or two days.
You can design them from almost everything that comes to hand:
As you can see, we can continue indefinitely, but we will limit ourselves to this list for now.
To properly make a garden swing with your own hands, you first need to prepare a project and drawings of the future design, based on the material you have available. If you are planning to make a metal garden swing, but there are not enough details, you can ask your neighbors, friends, or make them from another material, such as wood.
Prepare a pencil (pen), eraser, ruler, paper, protractor. They will be needed not only for drawing, but also for the subsequent marking of parts. If you can’t start drawing right away (don’t know where to start), then just sketch out the swing drawing, “as you see it”. It will be much easier to draw from the drawing.
Don't feel like you're wasting your time drawing all the details. At the construction stage, you will have to refer to the drawing more than once.
The installation of supports can be carried out in different ways:
The photo shows different types of installation. As you can see, the crossbars are also fixed in different ways. In addition to such mounting methods, for example, in the first picture, you can drill the racks at the top and install a metal pipe or a thick rod. It is used as an axle from a cart or trailer.
If you made racks from wide boards, you can drill them out and install bearings in the holes. Close them on both sides with perforated sheets of metal, which are nailed to the board. A rod must be inserted or pressed into the holes.
A more advanced method of fixing the horizontal involves a special design mounted on poles, made by welding from three pieces of metal pipes.
There are several options for mounting supports:
The second and third options are more acceptable. It is necessary to wrap the end so that the film comes out 20-50 cm. This will protect the bottom of the protruding part of the column from dampness in winter (in snowdrifts). The same must be done when pouring the column with cement. The formwork should protrude from the ground.
In order for children and especially adults (due to the greater weight) not to fall, it is necessary to hang the swing securely. To do this, you need to find:
Fasteners can be completely different:
The second method has several options:
The first two are designed to wrap around shaped crossbars: rectangular and round. They are a kind of clamps with hooks.
The last two are designed to strengthen the hooks or rings in the through hole of the crossbar.
Classic boards and half-logs on a swing have long become boring to everyone.
We will talk about several non-traditional methods for making swing seats. They are easy to make and don't take much time.
Option 1.
The easiest way is to use old chairs or benches made of any material that have broken legs. It's beautiful and practical. There are several ways to mount them on a swing:
Option 2.
You can make a seat from canvas or fabric, but it is not very comfortable, as it wraps around the person sitting on both sides, squeezing him. For convenience, you can install a spacer on a rope or chain above the seat and then the degree of girth will decrease.
Option 3.
Make a pseudo-seat from a tire. Hang it on ropes. In the sector facing the earth, stuff soft unnecessary things.
For convenience, take large tires, for example, from the rear wheels of a tractor.
Option 4.
Hoop as a seat. A hula hoop is taken and wrapped with ropes in diameter:
If this is difficult for you, you can put a ring in the center of the hoop and thread the ropes through it. First set the small circle in the center and fasten one cord so that its two ends are on the same side. Then reinforce the twine on the opposite side. Etc.
Option 5.
Use for this an old durable basin, tub or even a trough.
But just sitting on wood, plastic or metal is not very pleasant. For greater convenience, you can put pillows for garden swings on the seat, made of foam rubber and covered with dense fabric or leather. If, during assembly, it is prudent to make soft seats, then no pillows will be needed.
There are two ways:
Option 1.
They represent a seat made of any suitable material, suspended by one or two ropes from a bough.
The photo shows that the ropes can be tied in different ways, the main thing is that they do not slip off:
Option 2.
Run the swing entirely from wooden parts. That is, to make supports and a crossbar from beams or logs, and a seat from boards, slats or wooden benches and install as described above.
If you fill in the foundation, fix a downed special shield on it, a podium and install a swing - it will be even better. After all, the supports and the shield do not touch the ground. Moreover, additional bars are installed between the shield and the foundation, which provide airing of the shield.
The drawings of the two structures are shown below.
As you can see, a wooden garden swing is not so difficult to make.
Usually, a welded structure is made in the form of the letter P, on which the seat is suspended using hooks with clamps or through.
It is made of pipes of at least 5 cm caliber. You can simply dig or concrete two risers, insert the axle from a wide wheelbarrow or cart into the pre-drilled holes and lock it with mounted wheels.
You can weld a wire with a swing onto the axle, because the axle will rotate freely. For greater effect, you can install it on bearings, as mentioned above.
To perform the second option, you need to weld something resembling the roof of a house. Everything is clear from the drawing.
Structures of this type can also be made from a profile. We will immediately warn you - not from drywall. That profile is very thin and may not support a swinging person. It is designed for stationary load.
The industry produces rectangular pipes, T-beams, I-beams. Here you can make a swing out of them. Their appearance is no different from the other structures described above.
The following options are more difficult to perform, because for their implementation it is necessary or to weld several pieces together.
For pipe bending, a proven method can be applied:
These structures are distinguished by the fact that they can be easily carried or moved. True, this may require 2-4 people.
Usually, rocking designs involve a single, less often a double option. But now a 3-seater garden swing has come into fashion.
The installation of racks and suspension is identical to those described above, but the width is much larger.
To perform it, you need to make a special elongated seat that would accommodate three people, and install racks at a distance of at least 2 m.
The seat is available in two versions:
Let's consider the first option. He is easy to perform. For its manufacture, you can even hang a bench that can be seen in parks. But because of its large weight, this is not worth doing. It is better to make a special seat yourself.
It can be made of aluminum pipes or wood. Below is the procedure for assembling the 3-seater seat. Its length is 1500 mm or more, the width and height of the backrest is 500-600 mm.
(18
ratings, average: 4,00
out of 5)
Nursery garden swing in the country is a casual game, great leisure and fun. There is always a lot of children's laughter and joy near them. By installing them at their summer cottage, you can get another place for a pleasant pastime. By following the simple rules for creating design and safety, you can make a children's swing for a summer residence with your own hands.
In order to get it right calculate the possibilities and forces, you must first determine the preferences of family members and get acquainted with the manufacturing options (photos and drawings of a garden swing can help with this). Some prefer to lie languidly with a book or tablet, and some need to sway with a whistle in their ears.
Swing garden wooden are divided into several main groups:
Each model can beat like this that the household will choose her favorite corner of the garden or cottage, and all the neighbors will begin to envy.
When the choice made in favor of the "bungee", then the answer to the question is obvious - we install it on the nearest tree, which inspires confidence in terms of strength. And when choosing a place for other types of swings for giving, it is necessary to take into account such factors:
Great when under construction soft grass or sand. This will make it possible during the fall not to get injured on the reinforcement or stone.
You can do without them. However, when a serious project is meant with a claim for long-term operation, then for reasons of saving building materials, it is advisable to prepare a drawing of a swing . design a wooden swing with your own hands it will not be difficult when there is at least a slight experience of such work.
General provisions that display the drawings of a children's garden wooden swing:
Whatever type of swing is chosen, it is necessary draw a lot of attention on the quality of the material (directly on the tree) from which the structure will be built. A high-quality tree will not only be able to ensure the durability of the structure, but, most importantly, guarantee the safety of operation.
The following species showed themselves well: larch, oak and cedar. Also, wooden swings are often made of birch, pine and spruce.
wood must be purchased dry, without foci of decay or traces of mold. There should be no holes made by pests, crevices, falling knots. The construction of a do-it-yourself swing made of wood does not require a large amount, so you can check each beam and board.
Before you make a swing in the country with your own hands, you need to make sure that you have all the tools required for this.
You will need:
This basic tools. When everything is prepared (project, drawings and material), we begin to build a garden swing in the country with our own hands.
In this case, the main difficulty is what to hang on. When you have a suitable tree growing, it is advisable to make the crossbar from a log (about 25 cm in diameter and 3 meters long), fixing it with ropes. A strong branch at the required height will relieve the need for this design.. When not in the country find a suitable tree, then, in addition to the supporting beam, two logs (30-40 mm in diameter) will also be needed to assemble the U-shaped frame.
Pre-logs need treat with an antiseptic and sanded, then they are placed in prepared pits (50 cm) with crushed stone at the bottom and filled with cement mortar. When pouring cement is not planned, then the logs will need to be dug to a depth of at least a meter.
During the installation of the frame, the most important thing is to prevent distortion. There is an interesting option to adjust the level correctly: the Egyptian plumb line. D this system is quite is simple: the upper load is a nut or any curved piece of iron, and the lower one is a small container of sand.
As for the seat, there are many variations for every budget and taste:
To the choice of material for suspension, with which we will hang a bungee on fastening, it is necessary to treat responsibly. Cables, ropes or ropes must be reliable, best of all new, and not rotten from attic stocks. It is not recommended to use chains in this case, as the child can easily pinch his fingers in them.
Suspensions during fastening on a carrier beam must be no closer than 1.5 m from each other. You can secure them with leather-wrapped loops or hooks. You can also use special steel fasteners - thimbles. The most durable fastener is a carabiner with a collar. However, safety teeth must be on the carabiner, otherwise it may move during strong swinging.
Usually , frame swing for summer cottages they have a fixed solid base, for example, a sofa or a bench. This is a more permanent structure, unlike rope structures. Most often, this building is installed not only for children, but is also perfect for relaxing with the whole family. Construction options will depend from selected material.
Today swings made of logs are quite relevant. Though they look bulky but reliable and original. The seat can be hung on L-shaped, U-shaped and X- or A-shaped frames.
At the same time, X-shaped frames are the easiest to make: on the logs fixed with a “cross” (about 12-15 cm in diameter and 2.5-2.8 m long), a load-bearing beam is superimposed on top. The cross begins approximately 45-60 cm from the ends of the logs. For fixing, threaded spokes (15 mm) are best suited, which are fixed with nuts on both sides after installation.
The lower ends of the supports are cut inward at an angle of 45 degrees. After that, on each cross, it is necessary to fix the ties in the form of bars of small thickness measuring 2-2.5 m at a level of 35-50 cm from the lower ends.
We install both crosspieces and fasten the third tightening log between them at the same height as the first two, and also fasten the supporting beam in the upper grooves. The frame of the swing is assembled from logs. Now you just need to hang a sofa or put together a bench. The simplest seat can be easily built on a 6x8 cm timber frame, which is then sheathed with a 4 cm thick board. The parameters of the bench-sofa are as follows:
As suspensions, you can use strong ropes, cables, ropes, chains. They are attached to the bench with carbines or knots. But for fastening to the cross beam, two eye nuts and two large bolts will be needed.
Hanger installation steps:
Near a large bench, as a combined option, you can fix a single bungee for children on a long supporting beam.
This is a fairly convenient material for assembly, therefore it is not difficult to build a wooden swing from a bar in the garden with your own hands, however, the skill does not hurt.
To assemble a swing from a bar with your own hands, the following material will be needed:
First of all, we collect the crosses. This is done in the same order as according to the principle for a wooden garden swing made of logs: mark, cut, connect, hang a chair or bench.
On a swing made of timber, the crate of the crosses of their thin rails looks great, where you can attach flower pots. A light roof would also be quite appropriate. A very interesting option is when the roof is made of a "house", as over the wells in the village. If you apply maximum imagination, then this "harbor" in the garden will become a favorite place for family holidays. Especially with soft pads on the bench.
Probably, many could see latticed wooden coasters for various goods in warehouses and stores. Often, after the importation of goods, they remain in summer cottages. However, the idea to build a garden swing out of it with your own hands can only come to a person with a remarkable imagination. The most important thing is that the pallet is not rotten and strong. It must immediately be treated with water-repellent and antimicrobial compounds, painted and dried.
So, here is another idea on how to make a garden swing for a summer residence with your own hands, and very quickly. A cable, rope, rope or chain is fixed on 4 sides of the pallet and hung on any frame or support. Thus, you can make a luxurious seat, which can comfortably accommodate two children and swing together from both sides. Or, by laying a pillow and a mattress on it, we get practically a cradle.
When the farm has two pallets, then by fixing them with corners, you can build a bench that will look great on any frame base.
Once upon a time, such entertainment for two was a mandatory attribute on playgrounds. Which were willingly ridden not only by children, but also by older romantic people. On the garden plot, these swings will certainly come in handy.
When everything is relatively clear with hanging structures, then how to make a wooden balancing swing with your own hands to give? These swings can be made from boards, bars and logs.
For the simplest classic option, you will need:
So, the construction process is quite simple:
And now another garden wooden swing is ready.
Garden wooden swing is a great way to relax in the country. It is even more pleasant if they are made by hand. Their construction does not take a lot of time, but you can literally enjoy the result every day!
kayabaparts.ru - Entrance hall, kitchen, living room. Garden. Chairs. Bedroom