Removable tile bath screen. Do-it-yourself bath screen: we make it from tiles and drywall
It is difficult to imagine a comfortable countryside vacation without a country shower. Thanks to him, staying in the country becomes much more pleasant, especially in extreme heat.
It is not so difficult to make it if you use a moisture-resistant material that is easy to mount. It can be cellular polycarbonate, plastic panels or corrugated board. If you need the best option - you should pay attention to the shower from corrugated board.
Advantages of a country shower from a professional flooring
1. Cheapness. Firstly, if you decide to make a do-it-yourself shower from corrugated board, you save money for all the assembly work. Secondly, the material itself is quite inexpensive. Thirdly, often after various construction works sheets of corrugated board remain, which are a pity to throw away - but here they will come in handy.
2. High strength and the rigidity of the galvanized sheets of the material guarantees excellent properties for the walls and roof of the future shower.
3. Anti-corrosion properties- this is very important for a room where high humidity is expected.
4. Ease of installation work, as it is not necessary to have sophisticated professional equipment and relevant skills.
5. Construction speed and installation - four to five hours are enough. Then you need to wait until the sealant dries, and you can begin the full operation of your small architectural structure.
6.Durability designs.
7. Aesthetic appearance thanks to modern material processing and a variety of colors
Here is what a country shower from corrugated board looks like in detail:
We build a shower from corrugated board
At the heart of the whole technology is the fastening of corrugated board to a frame made in advance (from profile pipes and a corner). To build a summer shower from corrugated board with your own hands, you need to prepare the following materials before starting work:
- sheets of corrugated board;
- pipes for the frame (50x50 or 40x60 mm);
- fitting;
- comfortable shower head;
- hose;
- self-tapping screws;
- sealing tape, sealant.
You will also need tools such as a mounting clamp, a level and a shovel. It is better to choose high-quality materials, and not the cheapest. Then in the future you will enjoy all the benefits of using modern building materials. With their help, you can quickly and easily make a great shower from corrugated board with your own hands.
You just need to follow the instructions below and as a result you will get a presentable summer shower made of corrugated board, which will decorate the site and provide you with maximum comfort on hot summer days.
A simple practical shower looks like a central rack with plumbing and side walls, which are sheathed with corrugated board.
Stage 1. Dig the pit
A shower in a country house made of corrugated board can have a different design and be located above the pit itself or not far from it. If the drainage system is installed directly under the shower, then for this a hole is dug at least 50 cm deep and for 40-45 of them it is covered with large gravel, stones, brick fragments, etc. The top layer is covered with fine gravel. A wooden grate 10 cm high is already placed on this base - this is the floor of the shower. You can make it yourself, observing a gap of 0.5-1 cm.
In the second case, when there is no hole under the floor, you will need to create a drain - for example, by concreting a pipe and a plastic drain into the floor, or using a special pallet. Drainage should be carried out in a special sump or in a gutter. The eurocube, that is, a special plastic container in a metal grate, can serve as the first. Two such connected eurocubes can be a purification plant.
After determining the dimensions of the shower (usually 2x2 or 2x3 m), its base is marked. From this place, the earth is removed to the level of the depth of the shovel bayonet. Then the pit is lined with roofing material and covered with crushed stone with a layer about 15-20 cm thick.
In the same pit, a piece of hose or pipe is laid, which extends beyond the perimeter of the shower itself. The pipe can be laid on the surface or in a trench. Now a pallet with a drain is placed on top, which is connected to the pipe. You can just do concrete or tile.
Stage 2. Install the metal frame
A country shower made of corrugated board is made on the basis of a frame made of profile pipes. You need to calculate its dimensions, based on what sheets of corrugated board you have. Pipes will have to be dug into the ground to a depth of about a meter and this must also be taken into account.
Four racks from a profile pipe are concreted at the corners of the shower, and the fifth is needed for a door canopy. Then horizontal jumpers are prepared to connect the racks from below, above and in the middle - it is recommended to use welding, as this is the most reliable way.
If working with a welding machine in this case is impossible, then it is quite possible to use self-tapping screws for metal. You can take screw connections, but for them you have to drill holes. The finished frame is coated with an anti-corrosion agent and painted.
Stage 3. Raise and secure the barrel
It is necessary to strengthen the roof, for which profile pipes are also suitable. They will serve as lags, that is, bars on which roofing material will be laid. Already on top of this is placed a container of water.
Both a plastic and a metal tank with a recommended volume of 150 to 200 liters are suitable for water intake. If you are interested in quick heating of water, then pay attention to the flat designs of dark color. It is better to initially take a black tank from an easily heated material, but you can simply paint the barrel black, install and securely fasten it to the roof.
Stage 4. We sheathe the shower with corrugated board
Using self-tapping screws, the frame is sheathed with corrugated board. At the same time, verticality is constantly checked, for which you need a level. It makes sense to take a ready-made door, but you can do it yourself if you have time to tinker.
Stage 5. We install plumbing
The tanks sold already have holes for both the shower and the water intake - you just need to connect the supply hose, mount the faucet and put a watering can / sprayer. And for a regular barrel, you will have to do the following series of procedures:
- drill a hole;
- insert a piece of threaded pipe;
- put a crane;
- put another piece of threaded pipe (drive);
- connect a sprayer or watering can;
- cover the barrel from getting leaves and debris.
You can see the construction of a shower from corrugated board in the following video:
The next summer season begins, and many owners of private estates or dachas want to build a comfortable, high-quality summer shower for their dacha. Usually, you can always find building material for the construction of such a structure, for example, use the remnants of a recently made repair or some kind of construction.
Building materials that could not be obtained (frame parts, a suitable container for warm water, etc.) must be purchased in advance in specialized stores or markets. Any man can build a summer shower with his own hands. It will be enough basic skills and knowledge in the field of construction, as well as the ability to use the right tool.
Many options for building a summer shower have been developed. Consider one of the acceptable ways that will allow you to build a good summer shower, a maximum of a couple of days.
The most important design elements of a summer shower for a summer residence
The simplest, uncomplicated design of a summer shower is a rectangular cabin. The length of its sides is determined by the features of the build of people who are supposed to use the product.
Important! The interior space of the booth should not be made too cramped. It is imperative to provide an auxiliary space that is reliably insulated and protected from splashing water. In it you can have hygiene items, as well as personal items!
For a shower stall, the following optimal overall dimensions are determined:
- height to the shower head - 1915.0 or 1855.0 mm;
- wall length - 895.0 mm;
- the height of the structure (including the tank on the roof) - 2875.0 or 2525 mm.
Advice! If there is free space on the site, you can increase the length and width of the structure by 110.0 mm to expand the total and usable area of \u200b\u200bthe booth!
We give the structure proper stability
For the stability of the frame, built of wooden beams, it is necessary to build a pile-type foundation under it. To do this, you should get a garden drill and dig channel holes in the ground to a depth of 1.15-1.45 meters. Then, pipes are lowered into the prepared pits so that their ends protrude 26.0-31.0 cm above the ground. Asbestos-cement pipes (diameter 100.0 mm) or metal products similar in diameter (ordinary or profile pipes) can act as supporting piles.
Read also: Do-it-yourself gabion fence: features, installation rules
Recommendation! So that the skeleton does not collapse from the load (water in the tank), it is necessary to take a beam of at least 100.0x100.0 mm for its construction, and to extend the service life, the tree can be impregnated with various protective compounds (fungicides, water-repellent, etc.)!
A well-hewn beam is installed on the foundation and the ligation of the pillars begins from top to bottom. Of course, the frame must first be assembled on the ground, and then, using long bolts, fixed to the poles. In this case, the lower dressing acts as a lag for arranging the floor in a summer country shower under construction.
Previously, there was only one way to install the floor - in the summer shower it was made of wooden boards with the formation of wide slots for the drainage of flushed water. Now, along with this method, a metal tray is installed (as in a home shower), which has a drain hole. Through it, the waste water is discharged through a pipe to the side, for example, into a gutter or grassy thickets. Neighboring poles are connected by rigid slopes - special elements that are not mounted with an overlap.
We make a septic tank for the accumulation of drains
When developing a project for a country summer shower with a special septic tank for collecting wastewater, you need to remember the method and location of its placement. Installing a septic tank directly under the cabin is unacceptable. If you ignore this recommendation, then a specific (putrid-stale) smell will quickly appear in the shower stall.
In addition, more significant problems may appear - the destruction of the foundation and soil. That is why the septic tank must be placed a couple of meters from the mounted country shower. A drain pipe or, alternatively, a gutter lined with waterproof material (hydrostekloizol, PVC film, roofing material) must be brought into the septic tank.
Read also: Fence foundation: types, features
Materials for finishing a summer shower
The most budgetary solution is to cover the frame with opaque polyethylene, however, this design will not last more than a year.
As a rule, the skeleton of the soul is sheathed with such materials:
- lacquered lining;
- moisture resistant plywood;
- siding;
- slate sheets (flat or wave);
- professional sheet;
- Fiberboard, etc.
An important nuance! In order to maintain the unity of the overall style and harmony in the design of a backyard allotment or a summer residence, design experts advise covering an outdoor shower with materials used in the decoration of nearby structures or buildings!
A waterproof curtain can be used as a closing (fencing off) element. It is easy and simple after the completion of water-hygienic procedures, it shifts in any direction. A wooden door will look more aesthetically pleasing and reliable, closing which you can not be afraid of the intrusion of "random guests".
Principles for attaching a watering can
A plastic container or a water barrel is mounted at the top (roof) of the summer shower structure. Faster and more optimal heating of water by solar heat will provide coloring of the tank surface in intense black or deep brown color. Water can be drawn into the installed tank using an electric pump or manual buckets. If a pump is installed, then it must be equipped with a special plumbing valve that allows you to stop the water supply after filling the volume of the barrel.
A barrel or other container must have a special hole in the bottom, if there is none, it should be done. A pipe equipped with a shower horn (watering can and faucet) at the end is placed in the bottom well, and the seam is carefully sealed. The water supply is regulated by means of a foot-pressure device or a crane mechanism, which makes it possible to use very economically (strictly as needed) the water heated by the energy of the sun's rays.
Take into account! The dependence on the prevailing weather conditions and the level of solar intensity can be eliminated by building a summer, outdoor shower with a forced heating system, for example, an electric heater built into the tank!
You can easily make and equip a summer shower in the country with your own hands. Photos and dimensions, as well as recommendations for choosing a place for construction, you will find in this article. After all, there is nothing better in the summer heat than to cool off with cool water, especially after active work on the plot. With the onset of hot days, the presence of a shower in the country becomes an urgent and necessary requirement. This factor is especially important if your house is under renovation, and plumbing communications have not yet been completed.
In any case, the interior space of the shower must be spacious so that the bathing person can comfortably accommodate himself and with him all the things necessary for this procedure. The most common parameters of country shower buildings are 2.5 meters high and 190/140-160/100 cm wide. It is necessary to plan the construction of a summer shower in the spring, at its very beginning, so that by the time summer comes it will be ready.
There are no particularly strict criteria regarding the arrangement of such a shower. If you have imagination and the ability to hold construction tools in your hands, you will be able to translate your ideas into reality and build such a thing that is necessary for giving. Depending on the complexity of the plan, it is possible to equip a simple outdoor shower in one day. A more detailed project will take more time, but it will also serve you for more than one year.
Shower for a summer residence, which place to choose for it
So that the water in the tank is not cold, it is more logical to place the shower building in a place illuminated by the sun's rays. If you prefer to take a shower in the afternoon or late afternoon, then you should choose a part of the site where the concentration of solar activity is observed in the afternoon. It is important that this place is protected from winds.
The second important factor is the availability of a drain for used water. A summer shower for a summer residence should be installed on a hill so that the water drains quickly and does not stagnate, attracting insects. The operation of any shower involves the use of large amounts of water, and if a lot of people (a large family) wash in it, then this nuance must be calculated and properly equipped.
If the capacity of your shower tank will be approximately 1-2 m³, then a drain pit will be required. When arranging a place for water flow, its correct placement is important - in no case should it be located under the building itself. A sewer pit or a septic tank with drainage should be located at some distance from the booth, in turn, the slope should go in their direction.
The presence of a waterproof layer for drainage is highly desirable: hydrostekloizol, PVC film, roofing felt or concrete screed are suitable for this purpose. The drainage pit should be at least 3 meters away from the cabin, its depth should be 2.5-3 meters, the bottom is covered with gravel or a thick layer of sand. The top of the pit must be covered and fenced off.
How to make a shower in the country - an example of a simple design
There can be a great variety of options for this useful summer cottage - here the matter already depends on your creative approach. For example, we will consider the features of the "standard" version of the country summer shower.
The shower should be comfortable, so the smallest dimensions of the internal space should be at least 100 × 100 cm. Movement should not be constrained - a person should freely raise his hands and bend over during the washing process. A small place for clothes and towels (cloakroom) should also be allocated, 50-60 cm is enough for it. Thus, in the total footage, the dimensions of the shower will be 160 × 100 cm and 2-3 m in height.
- Install strong and reliable racks - this is your safety, since the tank filled with water for an outdoor shower has a huge weight. For this purpose, a wooden beam 100 × 100 is ideal.
- It is better to dig the racks into the ground, having previously treated them with tar or a fat-containing agent. Fill them with concrete mortar, by the way, it will be best.
- For the container at the top, a horizontal platform should be equipped.
- The cabin is made of any materials, the main thing is that it should hide the swimmer from prying eyes and protect from drafts.
- Containers for a summer shower can be metal or plastic. It is worth considering that the metal tank will heat up faster, but it will also rust. In order for the water to heat up quickly, it is recommended to paint the tank with black paint.
- If you make a frame over the tank and cover it with a plastic film, then the process of heating water will be much faster.
- The valve for the tank can be anything, but a ball valve is most suitable.
The whole process begins with marking the perimeter of the future shower, the racks are installed at the corners and connected from above with a dressing from a similar beam. After that, there is a turn of the lower dressing, keep in mind that it should be located 10-15 cm from ground level.
To fasten all frame fragments, use long bolts - this will have a positive effect on the overall strength of the structure.
However, you can do it easier and install a metal or acrylic tray, while the water will be drained using a hose.
To ensure that the shower door closes tightly, use seals. The shower compartment and the dressing room can be separated by a special curtain, and it would be better if the threshold between these two compartments is somewhat high (to prevent water from flowing into a dry room).
The summer shower, as already mentioned, can be finished with absolutely any material on the outside. Lining, plastic, polycarbonate, moisture-resistant plywood, fiberboard, slate, metal sheets, siding - the main thing is that the building is in harmony with the rest of the buildings on the site.
It does not hurt to pre-open wooden materials with protective compounds.
If the frame is welded from metal, then it must also be coated with anti-corrosion agents or painted with paint.
In order for the water in the tank to heat up many times faster, rafters can be laid on top of the upper trim, and a sheet of roofing iron can be placed on top of them. The metal will reflect the rays of the sun, which will make the process of heating water more active.
Summer shower tank, which one to choose
Separately, it is worth paying attention to water tanks or shower tanks - their choice is determined by the individual requirements and preferences of the developer. They are small and large-capacity, flat and round, iron and plastic. The size of the tank depends on how many people will wash in this shower, often a volume of 100-200 liters is enough for an average family. As mentioned above, it is better to choose a tank of dark color or even black - so the water will heat up faster.
Such a container must have a lid so that various debris and insects do not get inside. At the very bottom of the tank, a tap outlet is mounted, to which a diffuser is screwed.
There is an important point here - the tap should be located on the lowest part of the tank, so that all the water drains from the tank and does not stagnate.
Equipping a summer shower with your own hands, you can purchase a ready-made tank in a specialized department of the building market. On sale there are also containers specifically for such showers, with all the necessary parts included.
If you have a metal or plastic barrel of a suitable size, then after certain manipulations it can turn out to be a perfectly acceptable shower tank. For these purposes, a hatch is cut out on top of the barrel laid on its side to fill the water, and it itself is treated with acrylic enamel (or bath repair agent) from the inside - this applies to metal containers.
And you can not lay the barrel on its side. Everything is within your power if "hands grow from where it is necessary."
Also in this role, tanks from worn-out washing machines “act” well. Despite the fact that their volume is enough for 2 washes, they very quickly adapt to the shower tank, thanks to the presence of inlet and outlet pipes, as well as the necessary technical holes. Such tanks are not afraid of corrosion.
Equipping a summer shower in the country with your own hands, it is better to prepare photos and dimensions, as well as approximate drawings, in advance. So you will see all the working stages clearly and will be able to accurately calculate the final result. With such a work plan in front of your eyes, you will know how much material you will need for the exterior and interior of the booth and drain pit.
Paying attention to the functional part, do not forget about the aesthetic appearance of your summer shower - everything should be not only comfortable, but also pleasing to the eye.
An outdoor shower is a necessary building in every dacha, especially if there is no pond or other places where you can rinse in the immediate vicinity. In the shower it is good to freshen up after a hot day, or wash off dust and dirt after gardening. You can try to build such a building with your own hands. Tips and instructions on how to do this with a minimum of money and effort, we provide in this article.
A little about the benefits
The main benefits of a summer shower are:
- efficiency - in order to heat bathing water in the simplest design, only the sun is needed; you can wash without costly and time-consuming communications;
- convenience;
- availability for making with your own hands from improvised materials;
- the possibility of receiving water procedures at any time of the year with good thermal insulation;
- some models allow you to take a shower anywhere;
- minimum maintenance costs.
Did you know? The prototype of modern showers are the primitive baths that were built by the ancient Indians, Egyptians and Mesopotamians. They were partitions behind which people doused themselves with water, or ordered servants to do it. But the first showers in which water flowed upwards were invented by the ancient Greeks. This is evidenced by images found on Athenian vases dated to the 4th century BC. BC e.
Possible options
There are many options for building a summer shower. There are very simple and light structures, the equipment of which takes several hours; there are capital ones that will serve for many years. After reviewing the various options, you can use some ideas or use ready-made instructions as a basis.
Simple ways to arrange a summer shower
The simplest option for bathing in the country is a portable shower, which is sold in stores. It is a 20 liter water tank with a hose. The tank is hung on a tree or other vertical surface in a place that is well lit by the sun, and filled with water. Once the water has warmed up, the hanging shower can be used. There is enough water in it to take water procedures for 10 minutes. 
A tank equipped with a crane can also be used as a hanging tank. A hose is attached to it, ending with a shower head. The tank will need to be attached in a sunny place at a height slightly higher than human height (however, so that a person can reach the faucet with his hand).
Another simple way to arrange a bathing area is a lightweight shower structure that can be attached to the wall of any building. In this case, the wall will need to be covered with a special material that protects it from contact with water, for example, tiles or film. Such a shower can be either open or closed with a screen.
The rack is convenient in that it can be equipped in any place where the water supply reaches.
Common disadvantages for the first three options is openness to prying eyes and winds. Usually, under such a shower, they bathe only in a bathing suit and in very warm weather. 
An option that is gaining more and more popularity due to its simplicity, compactness and affordability. To equip it, you will need two corrugated hoses, two rubber pedals with valves (a rubber mat with a built-in pump), a container of water, a shower head. The principle is that a person tramples on the pedals or the rug with his feet, thereby pumping water from a container that enters the hose.
A shower-toptun can be purchased ready-made in a store or made with your own hands using a car pump. 
This design involves driving four wooden (or other material) racks into the ground. They need to place a plastic tank into which water will be poured. It will also serve as the roof of the structure. A hose is attached to the tap in the tank, on which a watering can is put on. Racks are covered with waterproof material. The floor is a rubber mat.
Frame shower can be made from various materials. The simplest option is built in a couple of hours. It can be made temporary, collapsible. That is, for the winter, you can clean the room and get it at the beginning of the new summer season. 
Important! When building a summer shower, you should choose black water containers. So the water will warm up faster, because this color best attracts the sun's rays. In addition, the water temperature will be much higher.
The most complex and serious version of the execution of a summer shower without a foundation. This is a finished stationary shower cabin with a door, equipped with a water tank and a tray. It is made of wood, polycarbonate, profiled sheet, plastic or tarpaulin. The water tank can be heated both by the sun and by electricity. The cabin can be equipped with a dressing room-tambour, in which things and shoes are left. It can also be made fully closed or semi-closed.
In addition to the design options described above, there are many summer shower design ideas. Using them, you can create a corner for washing for every taste and budget.
Capital buildings
In this subsection, we have selected an overview of models that are made with foundation pouring. Their walls are made of different materials:
- tree,
- gland,
- slate,
- plastic,
- polycarbonate,
- plexiglass,
- plywood,
- profiled sheets,
- bricks.
Basic principles for installing a country shower
To build a high-quality durable shower, several conditions must be met:
- choose a suitable place;
- determine the materials from which the tank, base and foundation will be made;
- think about how the drain will be arranged;
- estimate whether the shower will consist of one room, or whether it will be necessary to install a vestibule, toilet, etc.;
- depending on how you plan to use the shower - throughout the year, or only in the summer - provide for the possibility of heating the water.
Location selection
The first thing to do is to choose a good place for construction. The following factors influence his choice:
- water will be heated in a natural way, or automatic;
- its filling into the tank will be carried out manually or automatically;
- from what materials it is planned to implement the foundation and walls;
- building dimensions.
The shower will need to be installed close to the water supply so as not to carry water far, or so that a hose can easily reach it. The choice of location will also be determined by what materials the body is made of, how much space it will take, whether it needs to be hidden from human eyes, or whether it can harmoniously and beautifully fit into the complex of the entire summer cottage. If you plan to install a tank with a heating element, then the shower room will need to be located in close proximity to the mains.
Tank selection
The tank can be plastic, metal, polymer. A similar container can be purchased at a specialized store. You can also use any suitable thing - for example, an iron barrel, etc. - that is found on the farm. Its volumes should be calculated based on the requirement of at least 40 liters per person. The maximum volume of the tank is 200-250 liters. Dimensions are selected according to the area of \u200b\u200bthe building. 
As for the shape, a flat tank is considered the most rational - it is easier to install it on any structure, and the water is heated evenly. Also today, round and square tanks are common.
If you prefer metal tanks, then you should pay attention that they should be treated with anti-corrosion agents and paint (except for stainless ones). The service life of metal tanks with proper processing is about 10 years. Stores usually sell containers made of galvanized, stainless, carbon steel. The best and most expensive option is a stainless steel tank. Usually they are rectangular containers with a capacity of 40 to 200 liters.
Plastic containers can serve for 30-50 years. Their advantages are lightness, ease of installation, efficient water heating, undemanding maintenance and inexpensive cost. Without heating, plastic containers can hold 100-200 liters. They are equipped with lids in the upper part, into which water is poured. Tanks without heating can be round and square. 
Under a homemade tank, you can adapt a plastic or metal barrel by cutting out a threaded outlet at the bottom. In the future, you can insert a pipe or pump there.
Drain Options
So, you have decided on the place of construction, the materials from which it will be made, the type of tank. Now is the time to think about where the used water will go.
Important! If the withdrawal is organized incorrectly,or not organized at all, then some time after operation, an unpleasant smell, rot, mold may appear in the shower stall.
Foundation and foundation
The foundation for the building can be of different types. The main ones are:
The choice of foundation will depend on the type of materials from which the walls are made, as well as the volume of the water tank and the technical characteristics of the soil. Availability of a toilet
The country shower can be combined under one roof with a toilet. This will save space and materials. It will require pouring only one strip foundation, as well as equipment for only one drain. In addition, this will allow you not to litter the site with small buildings, because most summer cottages cannot boast of vast territories. And this is a significant time saving - it will be much faster to build one compact structure than two.
Possibility of water heating
If you plan to use the shower not only on warm sunny days, you need to consider the possibility of automatic water heating.
A heating element with a power of 1.25-2 kW can be inserted into the heated tank. In this design, the water will heat up for about three hours. 
Heating element for hot water
Important! If you plan to install just such a tank, you should know that you will need to constantly monitor the presence of water in it - a bare heating element will burn out when turned on. Therefore, a constant supply of water by a pump or water supply must be established in such a container.
It is also desirable to equip it with a sensor that will show the water level. 
How to build a budget outdoor shower
A budget shower can be built from metal pipes and wooden planks. You will need the following materials:
- metal pipes (40 x 40 x 3000 mm) - six pieces;
- pine boards (20 x 95 x 3000 mm) - 21 pieces;
- plastic tank with a volume of 250 l;
- screws;
- sand;
- crushed stone;
- wood oil;
- enamel for metal pipes;
- geotextile.
From the tools you will need:
- Circular Saw;
- magnetic corner for welding;
- Miter saw;
- screwdriver
To reduce the cost of construction, instead of wooden walls, you can use, for example, a tarpaulin or other material. However, in this case, the building will be very short-lived. Capital building
If you are planning a long-term high-quality construction of a shower that can be used in all seasons, we suggest that you consider the following option: on a pile foundation and with a septic tank drain. Recommended dimensions of a comfortable shower room with a dressing room: height - 2-2.5 m, width - 1.40 m, length - 1.90 m. A drawing is required for accurate calculations of materials and dimensions.
Foundation laying
The pile foundation can be made of metal pipes with a diameter of 100 mm and a length of 2 m each. For the foundation, draw a rectangle corresponding to the size of the shower enclosure. In the corners, you need to drill four holes 1.5 m deep for piles with a garden or ice drill, or dig them out with a shovel. To prolong the service life of metal pipes, they are treated with machine oil before being placed in the ground. 
Laying the pile foundation
After digging in the pipes, at least 30 cm above ground level should remain. The pipes must be poured with concrete.
After the concrete has completely hardened, it will be necessary to install the timber and the strapping. The frame is fastened with long bolts.
Digging out a septic tank
For the simplest version of the septic tank, a hole is dug in the immediate vicinity of the shower room, consistent with the dimensions of the receiving chamber, about 2 m deep. The walls are sheathed with brick or cinder block. Under the receiving chamber, you can use a barrel or other containers that are closed with a lid. A chute is brought to the receiving chamber and connected to the drain pipe. The gutter for the drain is laid out with waterproofing material. 
Frame installation
The shower frame is a welded structure made of metal pipes with a section of 40 x 40 or 50 x 50 mm. This design will allow you to withstand a 200-liter tank of water. The booth itself can be made of wood, siding, profiled sheet, lining. You should consider the presence in the walls, closer to the ceiling, ventilation windows.
If there is no welding, then the structure is made of wooden bars 60 x 80 mm. In this case, the booth will also be wooden. Such a shower will come out cheaper. The tree must be impregnated with special water-repellent agents.
After installing the vertical supports, the upper trim is produced. The side frames are fixed with spacers. 
The floor is made of wood. In this case, it will be warm, and it will be possible to stand on it without shoes. The boards in the floor are made with a gap so that water flows freely.
The door is installed last.
The plastic tank is placed on the roof and fixed with straps. The desired water supply scheme is selected.
Shower arrangement
A capital shower will require wiring for electric lighting. In this case, it is necessary to adhere to safety rules and insulate the wiring to avoid contact with water. 
All interior decoration must be made of moisture resistant materials. For a shower room that is planned to be used throughout the year, insulation from foam or other materials will be required.
You should consider the location of shelves for detergents, hooks for clothes and towels, and an internal lock for doors.
Another option for the capital construction of a warm country shower - on a concrete slab with a frame made of wooden boards and OSB sheets - can be viewed on the video https://www.youtube.com/watch?v=vwhv_668wwo.
Did you know? Remains of an ancient shower complex, presumably dating back to the beginning of the 2nd century BC. BC e., were found by archaeologists in the territory of modern Turkey. It consisted of seven installations, the water to which came from the main system, was supplied from above, flowed from installation to installation, and then flowed into the outlet system.
An outdoor shower is a necessary outbuilding for summer residents who prefer to use their summer cottage both for the purpose of recreation and for the purpose of growing fruits and vegetables. It is easy to make an outdoor shower cabin with your own hands, without having special skills. However, even for a simple structure, certain conditions will need to be met: choosing the most suitable place with prolonged exposure to sunlight, ensuring unhindered drainage of used water. For more complex capital structures, it will be necessary to design and purchase the necessary tools and materials.
Video: how to make a summer shower in the country with your own hands
So, you decided to equip a wooden shower in the country with your own hands - where do you start? Of course, with the choice of location for the shower and design. The next step will be.
After that, they move on to building walls. When this stage is over, you can do the floor, roof and door installation. Well, now about each of these stages in more detail.
Choosing a place for a summer shower cabin made of wood with your own hands
Before you make a wooden shower with your own hands, you need to carefully choose a place for it. If the heating of the water in the shower tank will occur only from the sun, then the place for the country shower should be located only on the sunny side.
The water tank should be exposed to sunlight for as long as possible during the day, especially in the morning. In this case, the water will warm up to a comfortable temperature. It is desirable that the sun illuminates the shower stall. In addition, it should be located in such a way that it is not blown by the winds.
Also, before making a shower out of wood, the place where it will be built must be equipped with a water supply and drainage system.
For the normal operation of a summer shower, a high-quality outlet and quick disposal of waste water are necessary. When the garden shower is located on an elevated place, a good outflow of water is naturally ensured. In the heat, the load on the outdoor shower increases significantly.
It is necessary to take into account the possibility of not only supplying clean water, but also constructing a concreted receiving well for wastewater. To do this, equip a drain pit with a volume of about 2 m. If a summer shower requires a small flow of water, then you can not make a drainage system. Water after bathing will be absorbed by itself, even if there is waterproof clay in the area under the soil layer.
If the family consists of 2-3 people, then a few tens of liters of warm water will be enough to take a shower. For 4 people or more, the amount of water needed to shower increases to several hundred liters.
If you make a wooden shower with additional heating with your own hands, you need to place it away from the apartment building.
When installing, you should remember about the nature and properties of groundwater. If the garden has sandy soil, then in depth it is usually underlain by clay rock. Then the used water from the shower can easily seep into the soil to the clay layer, and through it it will fall into the aquifer or into the local reservoir. In this case, there is a danger of runoff entering the well water.
How to make a shower out of wood: design
Before you make a wooden shower, you need to draw up a project. To do this, you need to determine the size of the future design. For a good pressure of the jets, it is necessary to place a container with water at a height of 2.5 m. The convenience of the cabin is of great importance so that you can comfortably wash in the shower at any time. If the dimensions of the booth are at least 2 X 1.5 m, then inside it you can place a clothes hanger, a shelf for soap, etc.
When equipping a wooden summer shower with your own hands, remember that the dimensions of the internal space in the booth should be at least 100 x 100 cm so that you can freely raise your arms or bend down without bumping into the walls.
The cabin must have a shower compartment and a water-proof dressing room, which is usually at least 60 cm wide, so the interior space of the outdoor shower cabin cannot be less than 160 X 100 cm. It is advisable to design a structure of 190 X 140 cm. To these parameters should be added more wall thickness, resulting in 200 X 150 cm.
How to make the foundation of a wooden shower for a summer residence with your own hands
To build a wooden summer shower with your own hands, you do not need a special foundation. The installation technology implies strict adherence to the strict verticality of the frame racks and a strong connection with the strapping. In this case, the supports should rest tightly on the linings. Compliance with these rules is mandatory, since a heavy water tank will be installed at the top. After determining the dimensions, it is necessary to make markings, marking a rectangle on the ground with dimensions of 170 X 110 cm or 190 x 140 cm. The height of a summer country shower can be 2.5-3 m. With a small support area, it will not be stable enough. To avoid tipping over the structure, it is recommended to equip a pile or. It is easy to build, but it will reliably hold the shower in the wind and other loads, since the 200 l water tank has a significant weight. As a material for the foundation, you can use metal poles, metal or asbestos-cement pipes with a diameter of 90-100 mm and a length of 1.5-2 m. After that, four wells 1-1.5 m deep must be drilled in the ground at the corners of the shower. insert pipes or poles in such a way that each of them rises above the ground level by at least 30-50 cm.
The bandaging of the pillars during the construction of a wooden summer shower for a summer residence with your own hands can be done in the form of a closed strapping, starting from the top.
This foundation design is a rigid frame. It is more convenient to assemble it on the ground, and then fasten it with long bolts.
The strength of the structure is ensured by the coincidence of all axes. In addition, fastening must be done using long bolts. In this case, it will be possible to install a water barrel with a volume of about 200 liters on the roof of the shower. A shower cubicle is considered the most stable if there are six foundation pillars under it. Under the columnar foundation, six holes should be dug with dimensions of 20 X 20 or 30 X 30 cm and a depth of 40-50 cm. The dimensions and depth depend on the structure of the soil. Pits must be filled with cement-sand mortar mixed with pebbles or gravel.
The places for the shower frame are ready. The base of the do-it-yourself wooden shower frame for the cottage should be made waterproof, with a slope to the drain, which is connected to the used water drainage system. Between the pits, it is necessary to remove the upper layer of soil to a depth of 20 cm, and along the edges of the formed pit, it is necessary to strengthen the formwork from boards or plywood.
The recess under the shower can be covered with roofing material or PVC film, but it is better to concrete it, forming a kind of water-resistant tray so that the earth does not silt under the country shower. After that, the bottom of the pit must be covered with sand, spilled with water, tamped, and then poured with a solution so that the platform rises 10 cm above the ground and grabs places for the foundation.
From the pallet, which has a slight slope, the water will go into the gutter, so the slope must also have a drainage gutter. Drainage of water from the summer shower must be organized into a special gutter (septic tank) located on the site or outside it. Water should be discharged through a pipe laid in a trench with a certain slope towards the sewage pit.
Under a wooden shower with your own hands, you can arrange a strip foundation up to 30 cm deep without a monolithic concrete platform. In order to give the future structure the correct geometric shape, it is necessary to check the equality of the diagonals of the foundation using a rope or a thick fishing line. After that, you can proceed to digging a trench 30 cm X 30 cm. The foundation should be poured with a concrete solution prepared from 1 part of cement, 3 parts of clean sand and 5 parts of fine gravel (5-20 mm).
Before preparing the solution, the sand must be carefully sieved. The solution must be poured into the excavated trench. When it completely hardens, use the level to check the horizontalness of the foundation.
If there are any irregularities, they must be leveled using a cement-sand mortar. If constant use of the shower is expected, then under the foundation it is necessary to pour a concrete platform or lay it out of brick in the form of a rectangle. Concreting of the foundation site should be done with a slope towards the sewer pipe, and a wooden grate should be placed on top.
How to make the walls of a wooden shower cabin for a summer residence with your own hands
When building the walls of a wooden shower cabin with your own hands, it should be borne in mind that with high humidity, the wood can begin to rot, so it should be treated with special anti-rot agents. It also has a number of advantages: it is an environmentally friendly, outwardly attractive and fairly durable material.
If it is not possible to make the entire booth out of wood, then you can use wood to build load-bearing poles. The remaining parts will be easier to attach to wooden poles than to metal pipes. The erection of the walls of the shower cubicle should begin with a rigid frame.
For a slate frame, you will need four cast-iron pipes, but any other material available can be used. For pipes in a concrete or brick foundation, holes should be prepared, pipes inserted into them and concreted for strength. When the cement mortar is completely dry, you need to proceed to the installation of slate sheets. For such a booth, three sheets of slate are required. They should be attached on three sides directly to the prepared frame.
On the fourth side there will be a door. The frame for the cabin can be made of metal corners. Its two elements are the lower and upper "circles" made of metal corners. For them, you can use corners 30 x 30 mm.
The third element of the frame is the binding "circles": pieces of metal reinforcement with a diameter of 12 mm and the required length. For greater structural strength, the lower "circle" of the frame should be concreted into the base. It is recommended to supplement the vertical reinforcement with several wooden bars to make it easier to fasten the material used to cover the booth.
Do-it-yourself wood shower poles are best sheathed on both sides with wooden clapboard. Such walls will reliably protect the building not only from the cold, but also from the heat. Since the frame pillars are usually located at a distance of about 1 m, it is not necessary to erect an intermediate frame.
Horizontal strips can be fastened directly to corner posts. For these purposes, slate, sheet asbestos cement or other materials should be used. Plastic and metal are allowed, but not recommended.
For the device of the simplest version of the shower cabin of the summer shower, you will need boards and bars for the construction of the room, as well as brick and cement for laying the base.
After marking and preparing the base, the bars should be attached to the foundation with brackets and anchors, then sheathed with boards or clapboard. Along the perimeter, the bars must be tied in three places.
When building a shower cabin made of wood with your own hands, it is recommended to choose a beam of 100 x 100 mm for the frame.
After carrying out work on laying the foundation and external strapping, it is necessary to make a dressing inside the frame, which will serve as logs for the shower floor. Rigid elements (slopes) must be made between adjacent pillars, which must be installed in the thickness of the wall itself. Most often, the walls of a summer shower are arranged in the form of shields from quarter-planed boards.
The construction of a summer wooden shower must be approached thoroughly. To give the entire structure the necessary stability, it is required to concrete the bases of the beams or dig them into the ground. Before that, they should be tarred or smeared with machine oil. In addition, they can be wrapped with roofing material. This is done in order to prevent the wood from rotting in the ground. The support posts from above must be interconnected by dressing from the same beam. This will give strength to the entire structure, which can withstand weights up to 200 kg. After that, you can proceed to the lower dressing, which will become the basis for the shower floor.
The walls should be upholstered with wooden boards, having previously treated them with drying oil, which will prevent the wood from rotting. It is recommended to insulate the walls using foam plastic or one of the modern foamed PVC insulation.