Do-it-yourself house for your daughter. Doll's life modeling designing a doll house for my daughter with my own hands my experience paper cardboard corrugated fabric

We used to build structures for games out of chairs, pillows and blankets. So why not help the younger generation today and build a real children's house with your own hands? You can use any available materials - wood, PVC or aluminum pipes, plywood, wooden pallets or thick cardboard.

Playhouse in the apartment

Even in a room of a small area, it is quite possible to install a small frame covered with fabric in the form of a tent or wigwam. If square meters allow, build a full-fledged wooden or plywood house in the nursery in the form of a fabulous hut, carriage, trailer, rocket or ship.

wigwam house

As you know, a wigwam is a special design, consisting of several long poles connected at the top and covered with dense fabric. Such a structure can be easily disassembled and put away for storage, moved from room to room, taken out into the fresh air, into the yard or packed into the trunk of a car and transported to a garden plot.

And it’s not difficult at all to make such a children’s play house wigwam.

As a framework, you can use:

• carefully sanded and varnished or varnished wooden slats 120 cm long and 2-4 cm thick; for outdoor installation, you can also use strong tree branches, but only if (!) If even the smallest knots are cut down from them
• PVC plumbing pipes
• light aluminum pipes, for example, left over from old curtains

To fit the tent house, it is better to choose dense linen or cotton, which allow air to pass through well. Under such an awning, children will be comfortable and easy to breathe even on hot days.

The simplest building-wigwam- three poles, firmly connected in the upper part at a distance of 10-20 cm from the top. To make the fastening strong, it is still better to connect them with bolts by drilling holes in the upper part of the frame.

The design can be slightly complicated by making a rigid base for it from wooden slats or pipes, which will be installed on the floor. There is no need to make a crossbar from the side of the entrance to the wigwam - the children will constantly stumble about it.

In principle, you can build a full-fledged tent in the form of a quadrangle or a tent, but you will have to tinker with the frame fasteners a little longer. We will talk about this below.

A few small pillows made of colored fabric, a mattress or a soft fluffy carpet will decorate the children's wigwam and make it more comfortable.

Tent or tent made of PVC pipes

Water pipes made of plastic have long been used by craftsmen not only for their intended purpose. After all, they make quite durable and comfortable garden chairs, tables and even greenhouses.

Decorate the windows of such an impromptu house with chintz curtains and lay a rug. Outside, the dwelling can be pasted over with cloth, wallpaper residues or colored napkins, painted with paints, decorated with appliqué, bright balloons, flags and garlands.

Let the child participate in the finishing process by handing him a brush and paints.

plywood construction

It will take no more than a couple of days to make such a house:

1 There are a lot of drawings for making a children's house on the net. You can use any of them. We will describe only the assembly principle itself.

2 The floors in the house are warm, and the house can do without them. But still, it is better to make a small elevation using wooden log bars with plywood screwed to it. It will be more convenient to attach the frame to such a base, and the structure itself will turn out to be more stable.

3 We mount the frame from racks-beams attached to the floor. It is better not to use nails - they can loosen. Fastening with screws will be much more reliable and durable.

4 Horizontal jumpers are screwed across the racks.

5 A bar is attached between them, forming the ridge of the roof.

6 For a gable roof, you will need to make a pediment - wooden slats knocked down in the shape of a triangle.

7 It remains to sheathe the walls and roof with plywood, paint it with paint or wallpaper.

8 The roof can also be made lean-to, by sewing up the upper part of the building with plywood at a slight slope.

8 The door is made of wooden boards or only a frame is made for it, and the door leaf itself is cut out of plywood. They hang it using ordinary metal loops, which can be purchased at a furniture store.

9 You can also paint or paste over the house with fabric, wallpaper or bright appliqué from the inside.

10 Curvilinear figures from plywood at home are cut with a jigsaw. If you know how and love to work with wood, make furniture for your child that he can put in his new house.

11 Plywood can even be bent by soaking it in a bath beforehand. Thick sheets should lie in the water for a couple of hours. For thin plywood, a 10-15 minute soak is sufficient. The softened part is laid on the surface and fixed with self-tapping screws so that during drying it acquires the desired shape.

12 Paint plywood with ordinary oil or enamel paint. Don't forget to pre-prime the surface. The paint in this case will lie more evenly, and it will go away much less.

Children's house in the yard

For children living in an apartment, a dacha can seem like a boring place. In order for the addiction process to go as quickly and imperceptibly as possible, take care of creating a playground and a cozy house with your favorite toys.

4 The floors will need to be raised with wooden beams and floor slats - a long stay of children in the shade on damp ground is unacceptable.

5 So that the tree does not quickly become unusable, it is better to install the building on bricks or concrete blocks. They are dug into the ground at the corners of the base on the spade bayonet.

6 To obtain a durable structure, you will need polycarbonate with a thickness of 8 mm or more.

7 Cut its sheets with a construction knife.

8 The protective film is removed already at the end of construction. Otherwise, scratches may appear on the plastic.

9 Any arched structures can be made from polycarbonate - it bends easily, but only in length.

10 The strength of this plastic is ensured by the special structure of the sheets. They are made in the form of honeycombs (stiffening ribs). However, this also has its drawbacks - if improperly fastened, water can accumulate inside. So that the polycarbonate does not darken from moisture and does not lose its attractiveness, cut the sheets so that the stiffeners are located vertically. The ends of the sheets are closed with a special end profile to prevent moisture from entering.

11 To avoid exposure of the material to ultraviolet radiation, the sheets are attached with a protective layer to the outside. It is always marked with inscriptions and pictograms.

12 If one sheet is not enough to close the wall, dig an additional support into the ground so that the joints of the sheets fall on its center.

13 With temperature changes, the material is able to change dimensions, so you should not place the sheets right next to each other. It is necessary to leave a small technological gap. When installing, use thermal washers to help compensate for expansion.

14 When drilling holes for fasteners, make them a couple of millimeters larger than the diameter of the screws. They should not be twisted tightly, otherwise the plastic will crack during thermal expansion.

15 To make a gable roof, you will need a ridge element made of the same plastic. You can buy it at a hardware store. You can also protect the skate from moisture with a strip of metal bent at the right angle.

wooden structure

The height of such a structure depends on the growth of the child. But children grow up quickly, so it is better to build with a margin.

1 Children's house made of wood does not require a foundation. To protect the tree from moisture, you can install it on a brick base. You can also use low wooden or metal piles. It will be possible to attach a slide to the porch of the house, installed on such supports and raised above the ground.

2 The floor must be strong enough and solid. It is better to use a floorboard or plywood. They are attached to the bars-lags. The side facing the ground is impregnated with an antiseptic.

3 As a frame, a thick beam 50x50 mm thick is mounted in the corners and at the location of windows and doors. To give the structure rigidity, horizontal bars are attached at the top and bottom.

4 Corners are reinforced with spacer bars - slopes, racks - with metal corners.

5 It is better to make a gable roof so that the child is not tempted to climb there. First, pediments are prepared from the bars - the end sides, having the shape of a triangle. Between them are horizontally running bars, on which the lining is stuffed or plywood is attached.

6 To avoid splinters, the tree must be cleaned and sanded.

7 To ensure ventilation, sufficient lighting and the convenience of observing children, several windows are made in it. They are located 50-60 cm from the floor.

8 The height of the door should be at least 20-30 cm higher than the height of the child.

9 Near the house you can equip swings, slides, install a sports corner. For a girl, you can equip a small flower bed, which she can take care of herself.

10 It's great if you organize a grand opening of the house with a tea party, holiday posters and musical accompaniment.

It is unacceptable to close light structures with heavy slate. After all, in the event of a collapse, the child may suffer. Use lighter polycarbonate, wood or plywood covered with soft tiles for the roof of the children's house.

Tree house

1 How to make a children's tree house? Building such a structure is not as difficult as it seems at first glance. Of course, only a person who knows how to work with wood can create design structures. But here is the simplest structure, consisting of supporting pillars and a platform, in the center of which a cutout is made for a tree trunk, even a novice carpenter can do it. The tree on which the structure will be located should be powerful enough, but not old, with strong branches. All dry branches must be removed.

2 The frame for the treehouse is made of well-sanded and primed timber. So that the tree does not lead, it must be dried well. The cross section of the beam is from 5 cm. It is better to use pine - it is less susceptible to decay.

3 The connection of the supports should be as strong as possible. You should not use the usual connection on self-tapping screws - it will quickly loosen.

4 In carpentry, for these purposes, a special type of “half-wood” overlap is used. To do this, recesses are cut out in wooden bars with a hacksaw and a chisel. The parts are superimposed on each other and additionally connected with bolts.

5 The wooden platform should be as stable as possible. It is made of timber and leveled with plywood.

6 The roof is covered with wooden slats, plywood or soft roofing.

7 It is also necessary to make a ladder. To do this, you can nail several wooden blocks to the inclined board. It will be more convenient to climb such a ladder.

Pallet house

Wooden pallets (pallets) are an excellent building material. Since the solid boards in them are already knocked together, you can assemble a playhouse quickly enough. Although, if desired, pallets can be completely disassembled and only boards can be used in construction.

1 Be sure to pay attention to the labeling. If the letters IPPC are marked on the pallets, it means that they have been treated with chemicals. The use of such products is highly discouraged. It is not necessary to build a children's house from painted pallets. After all, formulations containing formaldehyde are often used for their processing. It is better to paint the finished product yourself.

2 Several pallets need to be disassembled - we will use their thick crossbars to create a frame. To do this, remove all the nails with a nail puller. From the side boards, the crossbars can simply be sawn off.

3 Each of the pallets must be sanded, otherwise the children will quickly pick up splinters. To do this, you can use sandpaper with a large grain. It is inserted into the holder for sandpaper (grater). You can also use a grinder or grinder for cleaning.

4 If the pallets are dirty, they are pre-washed with a stiff brush.

5 First, collect the floor. For logs, we use thick cross-beams of pallets knocked together. For flooring, you can take chipboard or boards from disassembled pallets.

6 In order for the do-it-yourself pallet house to last as long as possible, to protect it from moisture, we install it on a small elevation of bricks buried in the ground at the corners of the structure.

7 Let's start assembling the frame. We attach vertical supports to the assembled base of the house - transverse pallet boards. We use metal corners and screws for this.

Willow Tent House

It is better to place a children's hut near the house so that the games take place in front of adults. Place it near a fence or in the shade of tall trees to protect your building from drafts.

For construction, any types of branches of sufficient thickness are used:

1 First you need to decide on the shape of the hut. Long branches can be arranged in a circle in the form of a wigwam, fastening them at the top and around the perimeter with strong twine.

2 A classic gable hut made of branches is done as follows. At the chosen place, two strong thick poles are hammered into the ground, the end of which is bifurcated in the upper part in the form of a horn.

4 A support pole is laid horizontally in the oarlocks and fastened with a rope.

5 It is better not to use wire for fastening. It will take quite a lot, and it is unlikely that it will be possible to ideally bend all its tips so that the child does not accidentally get hurt. It is better to take polypropylene twine or thick cotton twine.

6 Thinner poles are laid on the support at an angle of 45-60 degrees, first from one and then the other side of the hut. For strength, they are also fastened with twine.

7 Across the horizontal spears, you can tie vertical ones, thus forming a lattice.

8 Spruce branches (spruce branches) or hay are laid on top of the roof. To prevent rain from getting inside, laying starts from the bottom so that the next layer covers the previous one.

9 To protect against the wind, stones are placed around the perimeter of the hut, which are covered with earth.

The process of building a childhood dream from A to Z

How to make a children's house with your own hands: from wood and other materials. Dimensional drawings | (80 Photo Ideas & Videos)

I made a house for my daughter as a gift for her 6th birthday. My wife and I took part in the design, the same ones + my mother took part in the painting.

So let's start as usual with a drawing, I have it clumsy and with approximate dimensions.

Gradually I collect for clarity and come up with how it will look next.

The stairs were too long, cant. But fortunately, I assembled it on screws, 1 pc per step, so look further:

Since the main place in the design is always occupied by the wife, the "general" decision was made to make drawers from below. Milling the facade:

And this is how they look after sanding. A little work and 4th grade plywood turns into 1st grade plywood, though only in some places)

We disassemble, grind, glue, paint, assemble.

I was convinced that a back wall was needed. Well now I agree she definitely needed it. In a couple of rooms were even wallpapered.

Well, the final result. True, here the stairs to the attic are almost invisible, and it turns out that I did not arrange the boxes correctly. But with the color of the spiral staircase, the wife admitted that she was mistaken, of course it is possible to repaint, but this is unlikely, the daughter already likes everything, and I am an extremely lazy type.

And here is a photo of the morning when the gift was presented. It took a lot of work for us to drag him onto the balcony in the evening before his birthday so that his daughter would not notice. The house was quickly settled in, the boxes fell into place, and even the green staircase no longer stands out so much.

Good day everyone! My daughter loves to play story games, play situations from life, and now I wanted her to have a dollhouse, so that it would be three-story, in her height, with furniture, with a family of dolls. with furniture - from 8t.r., or even 10-12t.r. And of course, there is no price limit...

So I decided to do it myself. Ideally, I wanted a solid, tall, bright house with a mansard roof. But my husband is not handy, so there was an option with cardboard boxes ... And so that he was not flimsy and did not bend - strengthen with several layers of corrugated cardboard.

The BUDGET for the house (construction, "repair" in it, furniture, accessories) was 1000 rubles. Finally settled down

The main expenses were:

scrap paper as "wallpaper" - 250 rubles

glue (pva, pencil, moment) - 350 rubles

self-adhesive film "under the tree" for floors and furniture - 150 rubles

the rest is trifles ... there was a lot of unnecessary fabric, thanks to the mother-in-law! Well, all sorts of boxes, jars, everything that came to hand).

Deadline - did everything in 3 weeks.

Here's what happened:

First floor - kitchen-living room in blue and pink. The second floor is orange for children, the bathroom is purple, the third floor is the parents' bedroom.

Closer views of each room:

And with furniture:

PARENTS' BEDROOM in the attic:

the youngest baby doll lives with them, in the corner of his cradle with a canopy. In the room: parents' bed, a bedside table with a floor lamp, a chest of drawers with a bouquet of flowers, a carpet on the floor.

Second floor: nursery for two daughters + bathroom

BATHROOM:

The bathtub is the only piece of furniture that I did not make myself - this is a sponge stand from a fixed price list. In the bathroom there is a sink with a mirror, a toilet bowl, a washing machine with a basin, a laundry basket, and towels.

CHILDREN:

Wardrobe, bunk bed with stairs, shelving with toys.

KITCHEN-LOUNGE:

Dining area by the window, seating area to the right.

Living area:

Sofa and armchair made of boxes, upholstered in pink denim, with a little cotton wool inside for pot-belliedness)) Pillows made of knitted fabric, sentipon inside.

Dining area:

In the refrigerator there is a saucepan (I made it myself from a lid), a dinner set (a teapot and plates and cups) with a fixed price - ceramic. The sink is made from a foil mold for cupcakes. The facade of the headset is made of wooden sticks, a wall cabinet - dishes are stored there just)) Refrigerator - from the box.

As for the doll family, it's a different story ... For barbie, the height of the floor is too small (30cm, barbie herself 30cm), and the type of fabric dolls on the wire LE TOY VAN - they are small 13cm and 9cm. I found the same dolls for myself, suitable!

Dad and mom - 20cm, kids - one doll 15cm, the second Eva 12cm, the baby doll was in the bins))

Something like this))) My daughter, while I was making a house, kept running and asking - mom, is that all ?? you soon?? In short, he is already playing with might and main)))

And I also had a childhood dream come true with her, so to speak

What furniture is made of what I will not write, so as not to make the post endless, but if something is interesting, I will answer in more detail in the comments.

P.S. a house with the prospect of an extension on the left of two floors (each with 1 room), on the first floor an HALLWAY is needed, because the clothes of the dolls should hang somewhere, and on the second floor there will be another nursery, for a boy (brother for daughters). And on the third floor - an open balcony with railings - a veranda for family recreation, but this is all later, when there is a place in the apartment, because the house fits clearly into the remaining free wall

Thank you all for watching, who mastered

A do-it-yourself children's house in the country has dimensions of 160x160x140 cm and a ridge height of 90 cm. For it you will need:

• 4 foundation blocks;
• mounting corners;
• 11 bars for the floor;
• floorboards 4 pcs.;
• lining;
• carved platbands;
• furniture board;
• dye;
• ondulin;
• 5 bars for roofing;
• edged board;
• beam holders 6 pcs.;
• nails, screws.

Step 1. Making the floor frame

First you need to mount the base and align it diagonally, as well as reinforce it with metal corners.

Step 2. Choosing an even meta

At the right place, 4 corner points are marked using the frame, which will serve as a place for the foundation blocks.

Step 3. Giving stability to the house

The frame is laid on 4 foundation blocks, which are pre-installed at a depth of 1 shovel bayonet at the level of the sand bed. It is necessary to lay a layer of waterproofing between the foundation and the frame.

Step 4. Creating the floor

It is necessary to completely sew up the frame with the help of boards to get a flat floor.

Step 5. Finishing the floor

After making the floor, you need to process it from the inside, adjacent to the ground. Then you should proceed to the installation of walls, windows and doors.

Children's house with their own hands. step by step photo

Important! So that children do not drive a splinter and are not injured, you should choose jointed materials, as well as create chamfers at the corners.

Step 6. Creating the rafters

First, the rafter template is marked on the work surface, then bait is done using temporary nails. Then the rafter is sewn in, and all joints are strengthened with corners, and the nails are removed.

Step 7 Attaching the rafters

3 pieces of finished rafters must be placed on the frame and supported with an inclined support in order to set it on a plumb line. And then attach the rafters to the wall frame with the help of metal holders.

Step 8: Sheathing

The finished frame must be sheathed with clapboard.

Step 9 Roof

The roof is sheathed with a carved board on both sides, starting from the ridge. The roof is covered with ondulin, which is very convenient to cut with a grinder with a cutting disc.

Children's house made of wood with their own hands. A photo

To make the house look elegant, the ends and openings of windows and doors can be decorated with carved platbands, and the corners of the house with smooth figured corners.

Step 11. Interior

It is necessary to ennoble the house from the inside by installing, for example, a table and benches for children. The do-it-yourself children's house is ready, it remains only to paint it.

Pole house for children

You can build a house for games on your house adjoining site. It is not difficult to build a children's playhouse with your own hands. For example, you can build a children's house on poles with your own hands.

Do-it-yourself guide to building a children's playhouse

Under such a structure, it makes no sense to arrange a capital foundation. Instead, you can put a wooden beam with a section of 100x100 mm. You can connect the elements together with steel corners.

Next, you need to install supports for the upper floor of the structure. For these purposes, you will need boards with a section of 80x30 mm. In order to connect them, you can take jumpers, on which the boards of the second floor will be laid.

After that, wooden supports are mounted, which will be the basis for the stairs. You should also lay wooden floors.

Tip: in order for the ceiling of the second floor to withstand a heavy load, it is necessary to install wooden boards with the ribs down.

The supports of the house are best installed on paving slabs.

For safety, balusters with railings must be installed on the stairs.

Supports from above fasten with each other. To fix the wall frame, it is recommended to use jumpers.

house for children on poles. Instruction step by step

For roof sheathing, you can take plywood, and for walls - boards.

Any soft roofing material is suitable for covering the roof.

Also in the playhouse you can make a "black" exit. For these purposes, a hole is made in the floor into which it is necessary to throw a rope. Children will appreciate such an original exit from the children's house.

At the final stage, finishing work is carried out. For these purposes, you will need multi-colored paints, all kinds of decorative elements, etc.

house for children with their own hands. A photo

Under the house you can build a sandbox.

House for children master class. Step-by-step instruction

Do-it-yourself children's house is made from the following materials:

• sheet pile board for the floor;
• bar 45 x45 cm for the frame;
• metal fastening corners;
• "block house" for cladding;
• edged board (inch);
• bituminous tiles;
• "bioteks";
• nails;
• wooden corners.

First of all, it creates drawing do-it-yourself children's house It will have a veranda and 1 room with windows and a door.

Start building a house with grounds, which will serve as the floor. The tongue and groove board is connected with nails and tongue and groove fastening to three joists.

Then created frame future house of bars, which are fixed with metal corners.

Next stage - lining. For this, Block House was chosen - a material that looks like a wooden frame. Plus, it's pretty tough.

Important! In order not to damage the tongue when connecting the "Block House", it is better to use scraps of material and a hammer.

You need to clad the house, taking into account the side windows and doors.

The outer corners of the children's playhouse are closed with wooden corners with their own hands.

Roof covered with edged boards, which are fastened on each side with two nails. The flooring is made of bituminous tiles.

A finished children's house made of wood with their own hands is processed " biotex”, which will protect it from the sun and rain, and also give the desired color. For the house from the master class, the color pine was chosen.

Benches, a table and shelves are being built inside the house.

The idea of ​​a children's house with their own hands is brought to life. It remains only to present such a gift to children.

Master class of a children's play house in the country

Children's house with their own hands. A photo

For a children's house made of wood with your own hands you will need:

• 6 wooden boards measuring 1.8x2.4 m,
• bars with different sections;
• ruberoid;
• stain;
• screws;
• thin boards.

Step 1.

If possible, put rubble foundation. An alternative is to level the surface of the soil. Bars with a section of 10 * 10 are sawn into parts of the same length and arranged so that the distance between the racks is about 1.4-1.5 meters.

Step 2

Support bars should be placed in the ground under the posts so that the floor does not rot later. Bars with a cross section of 5 * 10 cm are located between the uprights of the panel that will serve as the floor. With the help of screws it is necessary to fasten all the bars to each other. The free space between the lags must be covered with soil.

Building a children's house with your own hands. A photo

Step 3

Wooden panels are cut and placed exactly in a horizontal position. They need to be fastened together with a beam.

Important! To make the flooring uniform, you need to lay the panels with a margin, and then saw off the excess.

Step 4

Next stage - side panels. It is necessary to make markings with the help of a beating, while leaving a margin of about 6 cm in width on each side. The height of the walls can be 1.5 m.

Slots are immediately made for windows and doors, also according to preliminary marking. In this house, the door size is 1.2 * 0.6 m.

Between themselves, you need to knock down the parts, cover with stain and proceed to the next step - assembly.

Step 5 Panels inside and out open varnish. The flooring is securely fixed. After that, the walls are attached to it with screws. On the side, a board with a section of 5 * 10 cm is fixed with a protrusion beyond the edge.

Step 6 The evenness of each wall after installation in position must be checked by level, after which the rest are attached.

Step 7Next, you need to install the roof and cover itruberoid. Use a wide ridge to close gaps between panels.

Step 8To make the house look more interesting, you can create a porch for it, and make shutters on the windows.

Step 9 Do-it-yourself children's house in the country, which will last for many years, is ready.

Children's house above the ground with a slide and stairs master class

The original idea of ​​\u200b\u200ba children's house with their own hands is on a hill. To build it you will need:

• chipboard boards;
• wooden bars for piles;
• slide;
• ladder;
• nails and screws;
• cement and sand for the foundation;
• dye.

The collection of the house will be carried out according to the principletenon-groove, which will make it possible to disassemble the structure if desired, for example, for the winter.

1. The collection of the frame is made as in the photo. If shutters are planned on the window opening, then hinged hinges should be purchased in advance.

2. A blank is made for the hatch cover.

3. Porch railings are being made. To do this, holes are drilled in the bars at the same distance, having a depth of half the thickness of the bar.

4. Finished slats must be tried on in the drilled recesses.

5. After matching, the slats need to be removed and temporarily fixed for the convenience of painting with nails.

6. An important stage - bookmark foundation. Under the massive piles, 4 pits 1 meter deep are pulled out. You will need metal fasteners for them. The supports are poured with cement and left until completely solidified.

Important! The deeper the piles are placed in the ground, the less likely the house is to move or collapse.

7. frame It is built from 4 main ribs and two side ribs that will be needed to support the roof.

8. After the frame is built, the floor is sheathed with boards.

Do-it-yourself children's house above the ground. A photo

9. Following the floor, the walls are sheathed.

10. Roof option - pavement, which is covered with polycarbonate attached to the stiffeners.

11. The window with sashes and the door are fixed in place.

12. Pre-made fences are installed.

13. The hatch cover is mounted using a chipboard sheet and door hinges.

14. The finished slide is attached to the house.

15. ladder you can make it yourself or attach a finished one that will lead to the hatch.

Step by step instructions on how to make a children's house out of wood. A photo

16. The construction of the house is completed.

Houses for children. Photo with description

1. Children's house on a hill with closing curtains looks original and functional. It can accommodate and play outdoors, or you can hide the room from prying eyes. A massive tree, as the basis of a house for children, will be reliable and last a long time.

2. Natural decor elements can easily turn a children's house into a full-fledged home. Glass windows and doors will give comfort and allow parents to look at their child at any time. Bright decorations will create a sense of celebration. But the creation of such a house should be approached seriously and thoroughly.

3. Such a massive stable house will definitely please the child. It is equipped with all the fun that you can think of for children. First of all, it is a spacious room, which, in addition to the usual exit, has another equipped with a slide. A staircase was built to enter the house, which is also very fond of fidgets. Well, for younger children there is a sandbox right under the house.

4. Girls will immediately appreciate a cute pink house. A simple design, high-quality wood, pink paint - and the children's house is ready. True, you will have to work hard on this - insert windows, a door, organize a veranda, hang flowers.

6. A blue panel house in landscape design will look very bright. Large glass inserts add originality to it. Such a house will be complemented by a spacious porch, unusual decorations and a path lined with stones.