1 linear. Running meter - how much? What is the difference between a running meter and a square meter

Choosing new furniture is always a difficult process. And when it comes to not entirely clear formulations, then this develops into a huge problem. Most often, buyers are confused. Basically, such products are sold in running meters, and they don’t bother to explain what it is on the label, hence the difficulties for consumers.

Why measure in running meters?

Many buyers cannot understand why invent some running meters there. For example, with wardrobe, armchair, sofa, table everything is much simpler, and the price is interpreted unambiguously. The need to introduce such a measure specifically for kitchens is explained by the fact that individual elements of the headset may have different prices, if their cost was set separately, then buyers would be even more confused.

On a note! Not always a running meter is such a good guideline, as it shows the minimum value of the cost. For each additional shelf, opening and storage system, you will have to pay extra.

Linear meter

• A running meter is a conventional unit of measurement for any kitchen, corresponding to a piece of material and expressing the length of an object, regardless of its width. It includes a minimum set of elements, there is no decoration. The filling of cabinets is also standard.

For most manufacturers, this is:

1. with opening doors.
2. One shelf.
3. One .
4. Plank for hanging shelves.
5. Less commonly, such an economy set includes: handles, baseboards, plinth.

• That is, 1 linear meter is the average price of one meter in length. This value is used not only when selling, but also to calculate the cost of ordering a product.

The price never includes:

1. panel;
2. backlight;
3. cornices;
4. ;
5. washing;
6. wall plinth.

Features of calculation and configuration

In order to understand how much your kitchen will cost in the end, you should determine its optimal set of spaciousness and functionality.

Important! In most salons, the headset style you like is ready to be provided in different variations.

The average standard option can be called this:

1. Bottom (floor) cabinets. Their number should be five: under, drawers, hob, two with doors for storing the necessary kitchen items.
2. Corner elements in the amount of 2 pieces.
3. Facades made of laminated surfaces, MDF tabletop.
4. Hanging shelves. Their number is the same as that of floor cabinets in most cases.
5. Cabinet-pencil case with compartment under .

Advice! Before heading to the salon, you need to measure the dimensions of the room for which the furniture is selected. Only 2 measurements are required: skirting board length and ceiling height.

The less non-standard solutions there will be in your new kitchen, the cheaper it will cost. But often the amount that is indicated per linear meter can only serve as a starting point, as it shows the lowest cost that you have to pay. At a minimum, you need to buy another sink.

Factors affecting the price of a headset

Of course, it is important to consider that many factors influence the price of a running meter. Let's consider the main ones.

• Materials. The cheapest - chipboard, further MDF, the last and most expensive -. Much less often, kitchens are made of stainless steel, mainly for professional equipment of restaurants. You can also find high quality headsets. Of course, you are unlikely to find the last two options in the average store, they are mostly made to order.

• Finishing. The most accessible are laminated facades, veneered fiberboard or varnished surfaces. Somewhat more expensive steel, lacquered glass. The most expensive facade is high varnish. This is the name of the surface covered with varnish in several layers.

• Special mechanisms, storage systems. Devices for lifting doors, wall cabinets, swivel baskets, auto-closers etc. These elements simplify the work in the kitchen, but at the same time add to its price. In some cases, the cost doubles.

• non-standard elements. Almost every manufacturer in the price list you can find atypical sizes of cabinets and shelves. However, remember that

Everything is measurable. It is a fact. But the values ​​used are different. Most of the products that are rolled up, which relate to fittings and kitchen products, are today measured in running meters. To be more precise, a running meter is how many meters in length. The width is not taken into account.

In one store, these stripes are in this form. But in the other there is just one wide strip of 3 meters long 10 meters. In essence, this is what we need. Since the cost is indicated in running meters, in the first store we will pay three times more than in the second. The savings are huge!

Remember, 1 linear meter is 1 meter of the product in length. And then it doesn't matter what the width is. The price will not change.

Carefully!

Very often, only the number of linear meters and the price are indicated in the product information card. This means that we do not know anything about the width of the product. If you buy everything in a store or market, you can bring your own tape measure.

On the Internet, such data is often hidden. You can not order a product without making sure of its parameters. It is worth calling the store and find out its width.

When you find two identical items with different prices, do not rush to order the cheapest one. It is possible that the width of that product will not suit you.

Marking the fabric is a matter, although not simple, but accurate. With kitchens, which are also measured in linear meters, everything is much more complicated. Usually, we take into account 1 meter of standard headset. That is, simple cabinets and tables are always used for miscalculations. All additional decorative elements are negotiated separately.

If you buy a ready-made kitchen, then information about running meters is not particularly important. You already see the finished price tag and decide whether the price is right or not. But with individual orders, you need to carefully consider everything.

It is important to emphasize that you can never know the exact amount in advance. We can only judge the minimum cost of 1 linear meter of your future kitchen.

There are two popular situations in which the answers are completely different:

1. Accurate calculation. You order an ordinary kitchen, where all drawers, cabinets and tables are of standard sizes. You don't change anything. The final price may differ slightly from the planned one.

2. Completely inaccurate calculation. The kitchen is completely original. All cabinets and drawers are designed for your convenience and size of dishes and furniture. The headset fits exactly into the design of the room. The final price may be several times higher.

Why is the total going up?

It is difficult to translate linear meters. And for the sake of a new idea, you have to put up with the pricing policy. To cut costs, it is worth connecting different components. That is, it is necessary to use as many standard elements as possible, diluting them with custom ones. So you get a kitchen that fits well into the interior, and save your budget.

Do not forget that different materials and design features increase the cost. One linear meter of a locker can become more expensive if you decide to install not 4, but 5 drawers in it. Each detail requires additional expenses. Carving or decorative stickers are far from cheap.

Alternative to running meter

Many shops calculate the price based on ready-made kitchens. You choose the model you like, see its price, and then change it a little, if necessary. In such cases, it is easier to evaluate a future purchase.

As a result, we see that a running meter is a value by which many goods are measured, from fabric to kitchen. It defines the length without specifying the width. In order not to make a mistake in the purchase, you need to clarify all the points. If the Internet refuses to tell you the width, then it's not worth the risk. After all, you can just lose your money.

Almost every person must have heard the expression "linear meter". For many, this definition remains quite complicated, since it is not at all clear what is the difference between sq. m. from the usual. What is the conversation about?

One linear meter equals the usual length of one meter. It is used to measure goods that have a certain width, for example, linoleum. It is much easier to calculate the cost of goods, taking running meters as a basis, than to calculate the cost of a square one.

For example, you need to buy carpet in the store, 2.5 wide and a certain length. Make a calculation of 1 m2, such a segment is not very convenient. To do this, you need to determine the area of ​​\u200b\u200bthe product. Then divide it into squares. In other words, it is necessary to perform complex mathematical calculations.

It's much easier to do calculations on a per-square basis. To determine the cost of the goods, you will need to multiply the length of the segment of the carpet by the number of meters.

There is a fairly large list of goods in which the cost is calculated by the number of running meters. These include.

• Fabrics.
• Linoleum.
• Carpet.
• Finishing film.
• Roll polyethylene.
• Electric wires.
• All kinds of pipes.
• Various fences.
• Fences.

Furniture calculation

A lot of consumers believe that the calculation by running meters applies only to rolled materials. However, this opinion is not entirely correct. When buying a product, we often come across a certain roll width. Linear very often determine the cost of furniture.

To make it clear, let's look at the following example.

The furniture manufacturer made an approximate calculation. To completely fill the three-meter kitchen, taking into account all the details of the furniture, he will need 30,000 rubles. Therefore, the cost of 1 m of furniture will be 10,000 rubles. In other words, such a cost will correspond to the price of one running meter. Based on such fairly simple mathematical calculations, the furniture manufacturer can tell the customer what the cost of a set of furniture of the corresponding sample will be.

However, one important nuance must be taken into account. When calculating the price m, only the cost of the cheapest fittings and material was taken into account. Sometimes the cost of fittings is not included in the calculation at all.

Therefore, if a very tempting offer is made to you, you must definitely find out what material the product is made of, what accessories are installed on it. In this way, quite often attract new customers.

How many mm in a linear meter

As already mentioned, one linear meter is equal to one standard meter. From this it turns out that there are 1000 mm in 1 linear meter.

cheat sheet

So, to make it easier to deal with units of measurement, they can be summarized in one table, in which their ratio will be visible, and it will be quite easy to convert one unit to another.

What does the term "square meter" mean?

This unit is designed to calculate the area of ​​a square, in which each of the sides will be 1 meter. To determine the size of the area, you need to multiply the height and length of the product. For designation, the short form is used - sq. m.

Today, this unit is found in our lives almost everywhere. The most obvious example is the dimensions of a dwelling. In other words, if we are talking about an apartment of 16 m2, then the floor area is equal to this value.

The square meter is most commonly found in the construction industry. To determine the area of ​​a wall that is 6 meters long and 4 meters high, simply multiply six by four. It turns out that the area of ​​\u200b\u200bthe wall is 24 m2.

The square meter (sqm) is a unit of area in the International System of Units (SI). It is equal to the area of ​​a square with a meter side. The area of ​​a rectangular () room is calculated as the length multiplied by the width (height).

Square meters are widely used in practice. For example, when it comes to selling an apartment of 46 sq.m, it means its floor area. When it is necessary to calculate the required amount of ceramic tiles for laying on the wall, it is necessary to find out the area for laying, namely the length of the wall multiplied by the height of the room.

The concept and distinctive features of a running meter

The running meter is completely different from the square meter. It measures length, and a square meter measures area. These two units are not interconnected and it is impossible to convert meters into square meters without knowing the width of the product. For example, a piece of fabric with a length of 2 linear meters and a width of 3 meters will have an area of ​​2 * 3 = 6 square meters.

Many people are wondering how many centimeters are in linear. The answer is quite simple - a running meter is no different from a regular meter in length, i.e. it is 100 cm. But it is a kind of length without width. To determine linear meters, it is necessary to have information only about the length.

Linear meters measure the length of the product in the case when its width (or height,) does not matter, for example, a roll of fabric, carpet or baseboard. In other cases, square meters are used, for example, when measuring the amount of ceramic tiles, laminate, etc.

Linear meters often measure rolled building materials. For example, in relation to linoleum, the price is often set in linear meters. This means that regardless of its width (it can be 3 m, 4 m), the buyer will pay only for the length he needs. The fact is that the width of the product is already initially included in the cost. But it happens that the cost of linoleum is indicated in square meters. Then it turns out that in order to buy 10 linear meters of linoleum 4 m wide, you need to pay for 40 sq.m.

For ease of calculation, the cost of furniture, such as a kitchen, is indicated in running meters. It means that regardless of the number of shelves and doors, the buyer will pay only for the length. In this case, we are talking about the standard version and standard fittings.

Often, linear meters are also used by builders when determining the cost of work. For example, for laying tiles on steps, installing skirting boards or grouting joints in ceramic tiles, the price of services depends only on the length, and not on the area of ​​work performed. But most construction work is calculated based on the area of ​​\u200b\u200bthe room (square meters).