Homemade from a drill with your own hands. An old hand drill - what you can do with it yourself Next - just a few unconventional ways to use a drill

The hand drill is a trouble-free drilling tool that enjoyed great popularity half a century ago. As soon as electric drills appeared, the demand for hand-held devices decreased, but did not disappear completely. Today, this tool is probably gathering dust in the garage, and everyone is wondering what can be done from an old hand drill. You can try to sell the tool, but take your time, you can get no more than 100 rubles for this tool, but by making useful homemade products, you get a unique unit. What can be made from the tool in question, we will consider with a detailed description.

Interesting facts about the hand drill

The tool in question, since its invention, has been actively used for drilling wooden and metal structures, and such a device is not intended for drilling concrete. This is due to the fact that the device does not have an impact function, so it is almost impossible to drill a hole in concrete with such a tool. However, home craftsmen found a way out of the situation. During the drilling of concrete, periodic hammer blows were applied to the heel, which allowed the drill to move into the material.

The main drawback of the tool is known to everyone who has ever had to use it. It lies in the need for physical effort. While drilling wood required little effort, when working with metal and concrete, it took at least several hours to achieve results.

It is interesting!The advantage that is retained by a hand drill even today lies in the autonomy of the tool. It does not require an electrical connection and does not have removable batteries. That is why, when going to the country or when working in the field, do not forget to take a hand drill with you.

The principle of operation of the tool in question is simple, and consists in transferring rotational manipulations from the handle to the tool chuck through a pair of gears. Gears contribute to an increase in the speed of rotation of the cartridge, but at the same time the force of the moment decreases. A simple and uncomplicated design makes the tool under consideration not only maintainable, but also durable. All that is needed to extend the service life is to monitor the amount of lubricant on the gears of the tool.

So, if you remember the design of the hand drill mechanism, as well as what it is, then it's time to figure out what can be done from this tool.

Tool for driving and unscrewing long screws

To unscrew or screw a long self-tapping screw into a tree, you will need to make a lot of effort. If you have tried to do this with a screwdriver or an electric drill, then you know that it is quite difficult to do this. For a certain recess, the self-tapping screw will “enter” the wood, however, it is almost impossible to tighten it with fully electric tools. It is also extremely difficult to do this manually, so you should call an old hand drill for help.

The tool for screwing or unscrewing long self-tapping screws does not need to be altered. It is only necessary to clamp a bit in the collet chuck of the device of the appropriate size, and get down to business. The efficiency of using a hand tool when screwing long self-tapping screws is an order of magnitude higher compared to low-power screwdrivers and high-speed electric drills.

Making a nozzle for a screwdriver from a hand drill

Few people know about what can be made from an old drill, so take your time to dispose of or sell this priceless tool. From it you can make a device for a screwdriver, which is designed for screwing and unscrewing various fasteners. It can be not only long self-tapping screws, but also bolts with nuts. The secret of this device is that you can make a very useful thing out of an old drill, which will allow you to get to hard-to-reach places, followed by unscrewing the fasteners.

The principle of manufacturing a nozzle or fixture for a screwdriver from a hand drill is to perform the following manipulations:

1. To begin with, we free the tool from unnecessary details. To do this, remove the cartridge from the tool, as well as the handle
   
2. The thrust heel is also dismantled, which is not needed in the new device.
3. The shaft on which the cartridge was located has a fairly large diameter. It will not work to install a shaft of this diameter into the screwdriver chuck, so we proceed to grind it
4. It is recommended to grind the shaft to reduce its diameter on a lathe. The use of an emery wheel or grinder for such purposes is not recommended, since the grinding will turn out to be uneven.
5. To grind the shaft on a lathe, it will need to be initially dismantled from the tool. It is not difficult to do this. In the mechanism, near the bevel gear, which is planted on the shaft, there is a hole with a cotter pin. This cotter pin must be knocked out, thereby separating the gear from the shaft
   
6. After grinding the shaft to 8-10 mm on a lathe, it should be installed in place, not forgetting to cotter. The shaft is made of hardened steel, therefore, before grinding it, it is recommended to do a heat treatment (heat it with a blowtorch)
   
7. The shaft is driven by a ball bearing that can be lubricated to prolong its life.
   
8. The first part of the work is done. The shaft that has been ground off will be used as a transmission device on the new fixture. The working element on the device will be the shaft on which the handle was attached
9. The second shaft has a specific hexagonal shape, which should also be processed so that socket heads or other nozzles can be put on it. The easiest option is to make a square from the hexagonal shape of the end protrusion for fixing the heads
10. This can be done with a grinder and a cutting wheel. At the same time, only heads for screwing and unscrewing bolted connections can be installed on such a shaft.
    
11. If you plan to use the device for other purposes, then threads can be cut on the shaft, after making it cylindrical and turning it to the desired size
12. It is necessary to screw the drill chuck onto the cut thread, into which various nozzles can be installed - bits, mixers, drills, cutters, etc.
13. Please also note that in order to install the chuck on the secondary shaft of the fixture, you will also need to cut an internal thread for the control fastening of the collet chuck
14. At the end of the manufacture of the fixture from an old hand drill, it is necessary to cut off the remaining part on which the stop foot was attached
    
15. After that, the homemade device is ready for use. It remains to fix it in the screwdriver chuck, and test

The advantage of such a device is to increase the force of the moment. A screwdriver drives a small diameter gear that transmits force to a large gear. A small gear is attached to the large gear, which transmits force to the second large gear, on which the output shaft is located, thereby reducing the rotation speed, which means that the moment increases. As a result, the device allows you to unscrew and break stuck and rusted bolted connections. However, do not forget that the main role is played by a screwdriver, which must have the necessary power reserve, otherwise its engine may suffer.

What are the advantages of a nozzle from an old drill on a screwdriver

Having figured out what can be done from an outdated hand drill, you need to find out the advantages of this device. These pluses include:

1. The torque is increased by 6-7 times. This means that the force from the screwdriver increases so many times
2. Ability to access bolts and nuts that are in hard-to-reach places
3. For the manufacture of fixtures, additional materials will not be needed, since everything can be done by hand
4. No need to purchase consumables

In addition to the fact that the device can be used to screw and unscrew fasteners and large screws, the device also allows you to quickly tighten and unscrew them. You will definitely be satisfied with this device. How to make it is shown in detail in the video instructions below.

What else can be done from an old hand drill

The above describes the process of making a homemade product from an old two-speed type drill, which has 4 gears. However, there are also single-speed devices that can also be used to make homemade products. From this type of tool, you can make a screwdriver, the work of which is performed with one hand. This is very convenient when the second hand is busy. Such a device is called a quick turn, and the principle of its manufacture is as follows:

1. Take an old clamp or weld a U-shaped frame on which the homemade components will be located
2. On one side, weld a fixed handle, as well as a movable trigger (made of steel at least 1.5 mm thick), which is connected to ¼-1/5 of the bevel gear from the tool
3. On the other side of the U-shaped frame, a shaft is attached, on which the cartridge and the bevel gear are fixed, connected to the semi-gear from the trigger
4. When you press the handle, the cartridge moves due to the transfer of torque
5. A bit with the appropriate type is fixed in the cartridge, after which you can get to work

This homemade product has one drawback - it is the need to detach the bit from the fastener in order to return the handle to its original position. An example of such an invention is shown in the photo below.

Making a machine for winding coils from a drill

What else can be made from an old hand drill that has been collecting dust in the garage for more than 10 years. Of course, you can make a simple device that will allow you to wind coils. You can wind not only threads and ropes, but also wire, for example, when rewinding electric motors.

The design of such a machine is very simple, and for its manufacture you will need to use the following devices:

1. Vice - a fixed handle or tool stop is attached to them, located in a horizontal position
2. A block of wood of the appropriate size, which is located near the cartridge. This bar acts as a stop, holding the tool in a horizontal position.
3. A coil or other devices are attached to the tool chuck, on which material is wound - wire, rope, threads, etc.

A photo of such a device is shown in the photo below. If you fix a grinding wheel in the chuck, then the tool can be used as a manual sharpener.

Drilling machine from a hand drill

So that the old drill does not lie on the shelf in the garage, it is proposed to make a manual drilling machine out of it. The advantage of such a tool is that you can always carefully make a hole in wood, glass, plastic, metal and even ceramic tiles, using the appropriate types of drills. The manufacturing principle is simple, and lies in the fact that you first need to make a bed with a movable frame on which a hand tool will be installed.

1. For manufacturing, you will need a board, metal corners and cylindrical guides, for example, studs on which you need to grind the threads. The length of the studs affects the amount of tool movement
2. First, the base is made, to which the studs are attached, located straight on one side of the wooden bed.
3. Holes are drilled in the corners for the studs
4. These corners with holes are put on studs
5. A wooden board of the appropriate size is attached to the corners, which will serve as the basis for fixing the tool
6. The drill is installed and fixed to the moving part
7. For smooth movement of the bed, a latch is made that acts on the pin, thereby limiting the movement of the movable bed

The design of the device can be different, and it all depends on your own ingenuity, however, the principle of creating such an invention with your own hands is shown in the photo below.

Making a ratchet from an old hand drill

The range of possibilities of the tool does not end there. You can also make a handy ratchet wrench from an old and unnecessary hand drill. Moreover, it can be used as a regular key, that is, tighten by hand, or in tandem with a screwdriver.

To make a tool, you will need two bevel gears and a shaft from a drill, as well as steel tubes, plates and a welding machine. The manufacturing process of the tool is shown in detail in the video material. The result is a versatile hand tool that is definitely stronger than modern ratchet wrenches.

As you can see, a hand drill is quite an interesting tool from which you can make various homemade products, expanding the possibilities, as well as simplifying your work. If you come up with something else that can be done with a hand drill, be sure to let us know, as it will help people use the outdated tool for new implementations of new actions.

The relevance of the question of how to make a router from a drill with your own hands is explained by the fact that not all home craftsmen can afford to purchase expensive serial models. Meanwhile, the usefulness of such a device and the need for its use in many situations (construction and repair work, the manufacture of all kinds of wood structures, decorative design of products from various materials) are undeniable.

Using a milling cutter equipped with the appropriate working tool, you can successfully mill wood products, form edges of various configurations on them, prepare seats for door locks and hinges, create grooves on wooden parts, and solve many other technological problems.

Components and assembly algorithm

It is possible to make a milling machine, which almost every home master has, but it should be borne in mind that such a device cannot fully replace the serial model. This is explained by the fact that the cartridge of a conventional hand drill is capable of rotating at a speed of 3000 rpm, while a serial milling cutter is able to ensure the rotation of the tool used at a speed of up to 30,000 rpm. In addition, the gearbox of a household electric drill is not designed for intense loads, which will quickly bring it to a faulty state.

Drill router

Meanwhile, the simplest milling cutter, made from improvised materials with minimal financial costs, is able to successfully cope with many technological tasks. To make your milling machine from an electric drill, you must find the following materials and tools:

1. several pieces of chipboard or thick plywood;
2. a clamp with which the drill will be fixed on the base of the device;
3. bolts, screws and other fasteners;
4. feather drill or drill bit with a diameter of 40 mm;
5. standard tool kit.

The process of assembling a homemade router itself takes place according to the following algorithm.

• The base of the future router is assembled from sheets of chipboard or plywood, which includes a horizontal base and a vertical part on which an electric drill will be fixed. The dimensions of the chipboard or plywood sheets from which such a structure will be made are calculated depending on the dimensions of the electric drill used as the basis of a home-made machine.
• A hole with a diameter of 40 mm is drilled in the horizontal base of the device, which is necessary in order to ensure the access of the tool to the processing area.
• A clamp is attached to the vertical stand of the device with a bolt, in which an electric drill is fixed. In this case, the drill should be positioned so that the lower end of its cartridge is a few millimeters from the horizontal base of the router.
• To make the position of the drill on the vertical stand more stable, you can fix a small wooden block in its upper part, which will act as a stop.

Adjusting the depth of cut when using such a router is carried out by changing the position of the electric drill in the clamp fixing it.

How to make the milling machine of the above design more convenient and functional? To do this, it can be equipped with a simple microlift, which will be responsible for moving the electric drill in the vertical direction. For the manufacture of such an elevator, you will need the following consumables and components:

1. two metal rods that will act as guide elements;
2. a platform (carriage) for fixing an electric drill, made of chipboard or thick plywood;
3. threaded axle and nut, which will be responsible for moving the electric drill in the vertical direction;
4. elements that ensure the fixation of the electric drill in the required position.

The principle by which such a homemade router works is quite simple and is as follows.

• When the threaded axis rotates, the carriage with the drill fixed to it moves in the vertical direction.
• After the electric drill and the tool fixed in its chuck are set in the required position, the carriage is fixed with the help of fasteners.

Naturally, the entire design of such a home-made router, the operation of which is well demonstrated by the video, must be fixed on a solid foundation. The surface of a desktop or workbench can act as the latter.

Machine from an old electric motor

With the help of which many technological operations are quite successfully performed, it can be made without the use of an electric drill. In order to make such a device, you will need the following consumables and accessories.

When performing carpentry and locksmith work, an appropriate tool is usually used, designed to perform specific tasks. However, there are situations when it is much more convenient and easier to use special machines. They allow you to optimize the process and save time in the same type of work. Therefore, questions about how to make a drilling machine from a drill very often arise among modern masters.

Necessity or luxury

First of all, it is worth saying that it is very convenient to use such a device when making holes in small horizontal planes. It almost completely eliminates the backlash that necessarily occurs during manual work. Even a small drilling machine from a drill significantly improves the accuracy of the hole made, minimizing the error. Also, such equipment saves a lot of time and effort if frequent use or monotonous work is necessary.

Almost all enterprises that carry out locksmith work are equipped with such units. The fact is that studies conducted in the field of labor protection have shown an increase in productivity and quality improvement when using them. Some of them even purchase a magnetic sole drilling machine in order to optimize production on large planes without the use of expensive equipment.

Why drill?

Currently, there are many designs for creating such equipment at home. However, most experts recommend making a drilling machine from a drill. This is due to the fact that this tool already fully contains all the necessary components and assemblies, and they do not have to be purchased separately. At the same time, the fixation on the structure is carried out so that it is easy to remove the drill for independent work. As a result, we do not lose a tool that can be used independently.

In order to create a drilling machine from a drill with your own hands, you need to purchase the tool itself. It is selected in accordance with the parameters that the finished device will have to have. At the same time, experts advise paying attention to products that have their own small backlash. Otherwise, the expediency of using it for work is called into question. You may also need:

• Guides. As they use systems used in furniture production, or metal strips.
• Bed. Most often, it is made from a metal plate or a wooden box, on which magnets or ballast are attached for weighting.
• Fasteners. When they make a drilling machine from a drill with their own hands, they immediately select couplings or clamps that are suitable for fixing a particular tool.
• Wood or metal structures - depending on what material is to be processed.
• The spring required to implement the reverse stroke.
• If a drilling machine on a magnetic sole is created, then the magnets themselves will be needed.

Tool

In this case, the selection of the tool used depends on the material for creating the frame. However, it is immediately worth noting that a corner for measuring the connection of elements at 90 degrees will be needed in any case. Even a mini-drilling machine requires great precision in its manufacture, since this will subsequently affect the quality of the holes made.

First of all, you need to decide on the designs of the final product and the material for its manufacture. However, there is no need to come up with overly complex technical solutions or expensive components. A typical drawing of a drilling machine from a drill is quite simple. It involves the creation of a strong and stable frame, on which a vertical tripod with a movable carriage is mounted. Given this, special attention should be paid to the implementation of moving the drill in a vertical plane, although the use of ready-made guides greatly simplifies this process. If you use the stand of a microscope, photographic enlarger or press as a frame, then the drawing will be based on their base, and the entire manufacturing process is greatly simplified.

Bed and tripod

Even a mini drill press needs a stable base. It not only must hold the entire structure, but can be equipped with various elements for fixing tools or other devices. Thinking through the device of a drilling machine, it is worth listening to the advice of experts. Many craftsmen recommend creating these devices from wood. Therefore, a wooden frame in the form of a small box is used for the bed. It has seats for installing a vice or other structures. If the product is planned to be used on large surfaces, then the bed is made of a solid plate with a drill hole. So you can implement the principle of drilling through.

Almost any device of a drilling machine involves the installation of a vertical tripod at an angle of 90 degrees to the bed. Therefore, it is very important to use an accurate measuring tool in the work. You also need to securely fix the tripod using additional mounts in the form of corners.

If the work involves drilling holes at a certain angle, then certain fixtures can be made in advance that will be mounted on the bed. Most often, in such cases, ready-made ball vices with an adjustable angle of inclination are used.

Creating a movement mechanism

When a homemade drilling machine is made from a drill, special attention must be paid to this stage. The fact is that the vertical stroke should be soft, without distortions, play or displacements. Given this, professional craftsmen recommend using ready-made guides in their work, which can be taken from other devices. You can also use systems made for pulling out drawers for cabinet furniture. They are quite reliable and can withstand heavy loads.

Installation of guides is carried out directly on a tripod or special strips attached to it. In this work, it is very important to use a measuring tool, since these elements must also be placed at an angle of 90 degrees with respect to the frame and parallel to each other. Even small distortions or displacements should not be allowed.

The second part of the guides is fixed on a special carriage, where the drill itself will be installed. It is made of wood and adjusted to the dimensions of the original instrument. Also, a small handle is attached to the carriage, with which the operator will control the movement process.

To implement the return movement and facilitate the control of the carriage stroke, a spring is installed on the machine. One of its ends is fixed at the top of the tripod, and the other is mounted on a movable mechanism. At the same time, the level of its tension is immediately checked, which, if necessary, can be changed by cutting the turns or stretching them. However, this setting is best done under load, which means that it is performed only after fixing on the drill carriage. Some masters recommend making the spring removable, it could be removed after work. So it will not stretch and weaken.

Drill fixation

Usually instructions telling how to make a drilling machine from a drill recommend creating special fastening systems, which in the end are very difficult to work with. However, if the tool is chosen correctly, then it can be fixed using conventional plumbing clamps used when creating a hose-to-pipe connection. In this case, it will be necessary to make certain changes to the shape of the carriage or even slightly correct the body of the drill.

It is very important that the tool is held tightly and moves in the clamp. Therefore, even at the stage of manufacturing the carriage, they practically do not leave free space for it, restricting it structurally from all sides. In fact, the carriage itself is a kind of bed for a drill, in which it will sit very tightly. Additional elements are needed only for the reliability of fixation. This approach greatly simplifies the design and allows you to quickly remove the tool if necessary.

Considering the material presented above, we can conclude that a drilling machine from a drill can be made independently and without large financial costs. At the same time, the final product will be maximally adapted to the performance of specific technical tasks and will be able to satisfy the relevant requests of the end user. However, it is worth considering the fact that factory designs usually have a smaller error and are able to perform accurate work with a minimum tolerance. Therefore, such devices are usually suitable for private use or in small workshops where high precision holes are not required.

9 Famous Women Who Have Fallen In Love With Women Showing interest in someone other than the opposite sex is not unusual. You can hardly surprise or shock someone if you admit it.

15 Cancer Symptoms Women Most Often Ignore Many of the signs of cancer are similar to those of other illnesses or conditions and are often overlooked. Pay attention to your body. If you notice.

How to look younger: the best haircuts for those over 30, 40, 50, 60 Girls in their 20s don't worry about the shape and length of their hair. It seems that youth was created for experiments on appearance and bold curls. However, already

What is it like to be a virgin at 30? What, I wonder, women who did not have sex until almost reaching middle age.

These 10 little things a man always notices in a woman Do you think your man knows nothing about female psychology? This is not true. Not a single trifle will hide from the gaze of a partner who loves you. And here are 10 things.

Our ancestors slept differently than we do. What are we doing wrong? It's hard to believe, but scientists and many historians are inclined to believe that modern man sleeps in a completely different way from his ancient ancestors. Initially.

We make a circular saw and other machines from a drill with our own hands

Sometimes there is a need to saw a fairly solid board into several planks. Manually, such work cannot be mastered, and buying a factory circular machine for the sake of a single case is unprofitable. There is a very simple way out - a small circular is made from an ordinary drill.

Design

It is better to make the machine small in order to put it on the shelf when there is no need for its presence. Its design is extremely simple:

• base made of thick board or piece of chipboard;
• working surface;
• racks;
• shaft with a circular saw;
• electric drive in the form of a drill.

We make the base from a chipboard sheet 30 mm thick, it is enough to cut a piece 300x250 mm in size. For desktop choose a sheet of duralumin with a thickness of 4 mm - it is quite rigid and light, so as not to weigh down the entire structure. In the right place, we make a hole for a circular saw about 160x10 mm in size.

The holder for the drill itself can be made independently - all the necessary dimensions and drawings are on the Internet, but a similar design for a shaft with a saw can be purchased at a store or at a clothing market. Shaft bearing must be selected dustproof- when a home-made machine will work, there will be a lot of small waste in the form of wood dust.

A circular saw from a drill is assembled according to the standard scheme: first, all the parts are fixed on the base, then the desktop is mounted and the drill is connected.

Security measures

When working on any machine, the following rules must be strictly observed:

• the place of the forthcoming work must be freed from unnecessary materials and tools;
• workpieces are fed smoothly without jerks and distortions, so that the cutting tool does not jam;
• the plane of rotation of the circular saw must be limited from above with a special protective cover ;
• the machine must be kept clean and cleaned after each use;
• if the mini-sawmill is not used for a long time, then lubricate all metal parts with machine oil.

This small machine can cut not only wooden boards. If you install special cutters on it, you can process parts made of brass and other non-ferrous metals, plastics or propylene.

Other homemade machines

Many users are interested in what else can be done with the help of improvised tools from a drill with your own hands? There are many answers - home craftsmen are already making various homemade products from a drill in garage workshops. A drill is a universal tool, so with a certain skill and imagination, you can make whatever your heart desires.

1. winepress. you just need to purchase emery in the form of a circle and make a special holder in which the drill is attached.
2. drillingmachine- there are special holders for vertical drilling or stand.
3. Turningmachine small size for woodworking.
4. Mini drill for various needs of the home master.
5. To easily mow the grass around the plot, you can do it yourself drill trimmer .
6. Bulgarian from a drill done quickly, just buy specific nozzles.
7. Garage car repairmen install original winches to replace engines based on old, very powerful tools.
8. Gardeners make holes for planting young trees with a homemade drill from a drill .
9. When pouring the foundation for a utility room in the private sector, some users use homemade vibrator. made from a drill to quickly compact a concrete structure.

original devices

You can continue the list of homemade products indefinitely, but we would rather talk in more detail about some homemade machines that can be made from any drill model.

A drill from a drill is not a fantasy, but a real and fairly versatile machine, assembled independently. The main thing is to order from Chinese engineers (if you could not find it in your city) flexible shaft from a standard medical unit. As a result, a drill appears in your arsenal, which can be used for engraving or drilling holes in small details or structures with special burs, where a standard drill cannot be approached.

Lathe

A woodworking or lathe for the home can easily be made based on a drill. The tool must be fixed with special clamps rather rigidly, insert a special design into the cartridge holder with several sharp pins holding the workpiece from turning. The center of the rear holder (headstock) and the latch in front of the homemade lathe should be located on the same axis. Accuracy is necessary to prevent runout during rotation of the workpiece. After installing the part, tailstock firmly fixed with a special clip.

The third element of the machine is handyman in the form of a wooden block, on which a chisel or other tool for processing the workpiece will rest.

Important! When working on a lathe, do not forget about safety, be sure to wear safety glasses, the sleeves of clothing should fit tightly around the forearms.

Turning the machine for processing wooden blanks will work properly if the drill has a built-in electronic speed controller. By trial and error, you set the optimum rotation for efficient wood processing. On such a woodworking device, you can make unique products for household needs: for example, a rolling pin or pestle with a mortar, a candlestick or a prefabricated chandelier.

The original winch based on an old but powerful drill will become an indispensable assistant in the household, especially for those users who live in their own home and have a personal plot. A simple situation: in an outdoor shower, you decide to install a larger capacity, but it is problematic to raise it to such a height alone. Using a winch, this can be done within a few minutes. Only it is necessary to pre-calculate the weight of the container and the speed of rotation of the spindle.

According to garage craftsmen, a homemade winch easily lifts the engine from a car. Watch the video if you don't believe me:

Experts advise using a homemade device by installing a drill on the most minimum revolutions. This design can move objects with different masses, because craftsmen make winches even on the basis of an ordinary starter from a car.

How to make a drilling machine with your own hands

It is advisable to make a drilling machine with your own hands in those situations when in a home workshop or garage it becomes necessary to drill holes in parts of various configurations, as well as made of different materials. It should be noted that such a device makes it possible to obtain holes with a sufficiently high level of quality.

One of the options for homemade drilling machine

When you need a homemade drilling machine

In manufacturing or repair enterprises, where the drilling operation is considered the most common, a special device is used to perform it, the models of which may have different functionality. So, it can be a compact desktop drilling machine, which has a simple design, or equipment equipped with several work spindles and numerical control.

The main structural elements of a homemade machine

For drilling holes in various materials, which is performed in a home workshop or garage, you can use DIY equipment. Naturally, for home use, you need a simple device that can be made from components and materials found in almost any garage or home workshop.

And in this article we will not leave unanswered the question of how to make a drilling machine at home, while spending a minimum of money. The drawings and experience of many craftsmen who have already passed this path will help us in this.

The need for such mini drilling equipment for metal, wood or plastic most often arises among those who are accustomed to independently carry out various repairs in their house or apartment. Also, quite often, radio amateurs are puzzled by the construction of miniature drilling machines.

It would seem that a conventional drill can be used to perform such an operation, but such a tool is not always able to provide the required quality and accuracy of drilling operations. Homemade drilling machine. in addition to its compactness, it has another important quality: drills of various types can be installed on it.

Simple mini drilling machine for small jobs

Drilling machine from a conventional drill

To make a small but functional drilling machine for your home workshop, you do not need to purchase special materials and components. The design of such a convenient and useful desktop device contains the following components:

• the base, which is also called the bed;
• a mechanism that ensures the rotation of the working tool (a conventional drill can be used as such a mechanism);
• supply device;
• a vertical stand on which the rotation mechanism is fixed.

Scheme of a homemade machine from a drill

The stand on which the drill will be mounted can be made from a chipboard sheet. This material is quite capable of supporting the weight of such a device. The bed of such a mini machine should be more massive, as it protects the entire structure from vibrations, which can adversely affect both the quality and accuracy of the resulting hole, and the comfort of work.

As a material for the bed of such a drilling and welding machine, you can use an ordinary furniture plate, the thickness of which is more than 2 cm. It is most convenient to use the base of an old photographic enlarger for this, slightly modifying its design. Sometimes an old microscope is used, but this is a rather rare option, since such an assembly will not be large enough and its use will be limited.

Drilling machine from a school microscope

The quality and accuracy that a home-made drilling machine will provide depends mainly on how correctly and reliably the connection of its base and vertical rack is made. Important elements of such a micro machine are two guides along which the shoe with the drill attached to it will move. Such guides are best made from two strips of steel, which must be securely screwed to the rack with screws.

In the manufacture of the block, it is desirable to use steel clamps that will securely fix the drill on it. In addition, in order to avoid unwanted vibration processes during drilling, a thick rubber gasket must be installed at the junction of the block and the drill.

After that, you need to make a feed mechanism for such a mini machine, which should ensure the movement of the electric drill in the vertical direction. The manufacturing schemes for such a mechanism may be different, but it traditionally contains a lever and a spring in its design, which is attached at one end to the rack, and at the other end to the block with a drill. Such a spring gives the feed mechanism greater rigidity.

A drilling machine from a drill that is not planned to be removed from it can be made more convenient to use if you disassemble the native switch of the drill and mount a separate button on the frame of the mini equipment. This button will always be at your fingertips and will allow you to quickly turn the device on and off. As you can see, it is not difficult to make a drilling machine from a drill, for this it is quite enough to carefully read these instructions or watch the training videos in this article.

An example of a machine from a drill in more detail

As an example, consider in more detail one of the options for a home-made drilling machine from a drill. collected at home.

Self-assembled drilling machine from a drill

Making a machine tool using an asynchronous motor

The absence of an extra electric drill in the household is not a reason to abandon the idea of ​​​​making a drilling machine with your own hands. Any electric motor can be used to drive the rotation mechanism of such equipment. Such engines, which were previously installed on various vehicles, are likely to be found in the garage or workshop of any home craftsman.

Asynchronous motors, which are equipped with washing machines, are best suited for the manufacture of a mini drilling machine. If you have such an engine, you can confidently use it to make home drilling equipment. Making drilling equipment with such an engine at home is somewhat more difficult than using a drill, but the power of such a machine will be much higher.

Given the fact that the weight of an induction motor is greater than that of a conventional drill, you will need a stronger base and stand to accommodate the feed mechanism.

In order for such a mini drilling and filler machine to vibrate less during operation, it is necessary to install the engine on a powerful base and place it as close to the stand as possible. But here it is important to maintain the correct distance, since the convenience of mounting the belt drive depends on it, due to which the rotation from the engine will be transmitted to the drilling head.

In order for you to make such a machine at home, you will need the following structural elements:

• gear;
• a hexagon on which a pulley will be put on;
• two bearings;
• tubes in the amount of two pieces, one of which must be with an internal thread;
• clamping ring, which must be made of durable steel.

The hexagon also connects with a metal tube, bearing and clamping ring. Such a connection must be very reliable so that the resulting node does not collapse during operation.

Drilling machine with asynchronous motor

The mechanism necessary to ensure the supply of a tool in such a mini machine should consist of a tube on which cuts are first made and gears. The tube will move by connecting its teeth with these files. An axle with a hexagon is then pressed into this tube, the height of which must correspond to the required tool feed.

An example of a drilling machine with an asynchronous motor

Consider one of the very serious options for a home-made drilling machine with an asynchronous motor, clearly not made by a beginner. Few home craftsmen take the risk of taking on the implementation of such a project, but if, as they say, it itchs, then nothing is impossible.

Difficult to manufacture homemade machine with an asynchronous motor

It is quite obvious that it is quite difficult to make such a machine, and then it is even more difficult to ensure the accuracy of its work. Therefore, the best option is to use an electric drill to make a home drilling machine.

Finally, we suggest watching a couple more videos in which the craftsmen demonstrate their home-made drilling machines. These videos once again prove that it is always possible to assemble the necessary equipment with your own hands, although sometimes it is not easy.

Homemade drilling machine from a drill

It does not always make sense and expediency to buy a factory-made drilling machine. You can make a vertical drilling machine from a drill with your own hands. To do this, you need a drill and materials for making a stand. Such equipment is recommended for use in home workshops or garages, when drilling is not the main operation or is performed quite rarely and the accuracy of the hole can be neglected.

To speed up the process, just buy a specialized drill stand in the tool store. The result is a semblance of a household-level vertical drilling machine, which is not inferior in drilling accuracy to machines for home workshops.

The photo shows factory-made drilling stands. They can be purchased at any online tool store for prices starting at $200.

The article is intended to give you ideas on how to make a drilling machine from a drill yourself, so we do not give a clear algorithm for its manufacture, because it is made from improvised materials: some masters will have it, others will not. Therefore, we give the main ideas, and everyone will apply their design solutions and make their own vertical home-made drilling machine.

If you are not looking for easy ways, then we will make a homemade rack. The rack can be made of wood or metal. Wood will be cheaper, easier to manufacture, but durability will suffer.

Metal ones are more complex, but they have an incomparably longer resource and strength characteristics. The choice of rack material also depends on the workpieces being processed: with constant drilling of metal, it is better to make metal.

Machine assembly

Metal stands are assembled from corners for the carriage, a 50x50 square tube for the stand and 10x10 for the drill bracket, a strip for the base and lugs. The base and bracket are welded, after which all elements are assembled and bolted together. It is recommended to make several brackets with different adapters (clamping rings) for different types of drills. The carriage moves along the bar with the help of a steel cable wound around the handle drum. So that the carriage does not have play and does not fall down under its own weight, it is drilled, threaded and a bolt (or several bolts) is tightened. This selects the backlash between the carriage and the stand of the future drilling machine. The handle for moving the carriage is made from rolled products with a diameter of 6 - 8 mm.

By having several brackets with different clamping rings, it is possible to flexibly select drills and process almost any material.

In the future, home-made equipment can be upgraded and modified, for example, mark or install a scale that will indicate the length of the carriage movement. This helps when drilling blind holes.

There are several mounting methods:

• several clamps;
• on a metal bracket in the hole for the neck of the drill.

Video of a construction variant from a drill on a wooden stand.

The easiest option for making a homemade drilling structure at home

A homemade drilling machine from a drill will never replace a factory one and will always be inferior in build quality and drilling accuracy. The main advantage of homemade is its low price, the ability to drill holes when the factory machine is not available for one reason or another.

You may also be interested in articles:

Homemade steering rack drilling machine
Choosing a drilling machine
Drill lathes How to make a homemade four-sided machine

Do-it-yourself drilling machine from a drill

Dear visitors of the site "Visiting Samodelkin", from the material presented by the author, you will learn how you can independently make a budget drilling machine from a conventional electric drill.
Every craftsman would like to have such a machine in his household, because in comparison with factory analogues it will cost ten times cheaper, and if all spare parts and components are available, then it is generally free.

The author of this machine is Igor Stasyuk, for which many thanks to him, he shared step-by-step photographs of the assembly of the machine with the people. The design is quite interesting and at the same time simple. Corners and 4 legs are welded onto the base from a 3 mm metal sheet, a 500 mm rod from a professional square-section pipe is welded onto this plate, the slider is made of 2 corners welded into the pipe and put on the lifting column with a gap so that the slider can move up the column and down. The lifting mechanism is driven by a cable stretched from the top point to the bottom, and on the slider the cable makes several turns.

And so, let's take a closer look at what exactly the author needed to assemble the machine? As well as the whole step-by-step process.

materials
1. sheet metal 3mm
2. armature
3. corner
4. cable
5. drill
6. workpiece vise
7. bolts, nuts, washers, engravers
8. drill clamp
9. paint
10.professional square pipe
11. drill

Instruments
1. welding machine
2. grinder (UShM)
3. drill
4. file
5. vise
6. clamp
7. caliper
8. ruler
9. corner
10th level
11. sandpaper
12. brush
13. hacksaw
14. emery

The process of creating a drilling machine from a drill.
And so, first of all, the author makes the base of the machine from 3 mm sheet metal, cuts the workpiece using a grinder (angle grinder) And welds 2 corners and 4 legs from a steel bar or reinforcement into the lower part. The length of the legs should be the same so that there is no skew of the bed.

Welded corners and legs.

Making a slider! 2 corners are taken and applied to a square-section professional pipe that will serve as a lifting column and pulled together with a clamp.

At the edges, it is seized by welding in order to simply bait for now, and only then specifically boil a normal seam.

This is how the preparation turned out.

The lifting column is made of a professional square pipe 500 mm long.

A bracket with a movable shaft is welded onto the body of the slider, on which the turns of the cable will be made.

A thread is cut into the drilled hole.

Handles of the lifting mechanism are made of fittings.

On the shaft there is such a head, which will be the basis for the handles.

And so, 3 handles are welded for the convenience of raising and lowering the drill through the mechanism.

Installed on a lifting column.

At the end of the cable, such a loop is made.

Attention! The cable is attached at the bottom with a loop, then several turns are made on the shaft and a stretch is made in the upper part of the lifting column.

I hope the principle of lifting is clear and without explanation)

A square pipe is welded onto the corner.

Here is actually such a mount for an electric drill turned out.

Then a drill is installed and secured with a clamp of bolts and nuts.

Now let's go back to the lifting mechanism.

A nut is welded into the upper part of the lifting column and a bolt is screwed into it, a cable is fixed to the bolt itself, and when the bolt is tightened and unscrewed, the cable is tensioned to the optimum norm.

It is advisable to pre-lubricate the moving parts with grease or lithol.

These small vices can be purchased at the hardware store in the tools section.

All parts were sanded by the master with sandpaper, and then painted.

And now the vise is screwed into its rightful place. And now the Author is already drilling holes in the wooden handles for the machine.

Installation of wooden heads on handles.

Here is actually such a wonderful machine turned out by our master.

Do more creativity, grow above yourself, create and success will surely come to you.

This concludes the article. Thank you very much for your attention!
Come visit more often, do not miss the news in the world of homemade products!

The article is presented for informational purposes only!

A hand drill is a tool that was very popular before the advent of power tools. Every self-respecting master in his arsenal had at least one such drill, which was simply an indispensable assistant. But such a tool has a significant drawback - it is the need to use physical force. Today, such tools have been replaced by more rational ones - electric drills and cordless screwdrivers. New tools have appeared, but what about the old hand drills? Whoever has a hand drill from the times of the USSR lying around in the garage, do not rush to dispose of it. There are some useful things you can do with this tool. This article will explore several ideas.

The hand drill was created to drill holes in various types of materials: wood, plastic and metal. The principle of operation is based on a pair of gears of different diameters, which allows you to increase the speed of rotation, thereby making the tool quite suitable for drilling. It is thanks to the gear mechanism that the tool has become widespread and is used even today.

Interest in the use of a hand drill has declined since the invention of electric drills, but still, the use of this tool is resorted to in extreme cases when there is no electricity, but an urgent need to drill a hole. We will not delve into the details of this tool, but rather find out what can be done from an old hand drill?

Option 1

If you are wondering what can be made from an old hand drill, then you are on the right track. Do not rush to throw it away, as you can make an excellent attachment to a screwdriver from it. The finished product will allow you to unscrew and tighten various types of fasteners in hard-to-reach places, using a screwdriver. How to make such a device, consider in more detail.

The advantages of such an attachment for a screwdriver

The advantages of this prefix include the following points:

1. Increasing the torque of the screwdriver by about 6-7 times.
2. The ability to screw and unscrew bolts and nuts in hard-to-reach places.
3. Ease of manufacture.
4. Does not require any additional investment.
5. Expanding the possibilities when working with a screwdriver.

Such a home-made prefix is ​​sure to come in handy on the farm, as well as when carrying out car repairs.

What to make from an old hand drill: option 2

You can also make a very handy wrench out of a hand drill, something like a ratchet. This will require all only two gears and some additional parts. The result is a tool of this type, as shown in the photo below.

Details of its manufacture can be seen in the video:

In conclusion, it should be noted that such a useful thing as a hand drill is fraught with many more application ideas.