About the professional vocabulary of an electrician stsb. Electrician for signaling, interlocking and blocking

This job description has been translated automatically. Please note that automatic translation does not provide 100% accuracy, so there may be minor translation errors in the text.

Preface to job description

0.1. The document comes into force from the moment of its approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. Document approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic verification of this document is carried out at intervals not exceeding 3 years.

1. General Provisions

1.1. The position "Electrician for the maintenance and repair of signaling, centralization and blocking devices of the 6th category" belongs to the category "Workers".

1.2. Qualification requirements - incomplete higher education (junior specialist). Training. Experience in the profession of an electrician in the maintenance and repair of alarm, centralization and blocking devices of the 5th category for at least 1 year.

1.3. Knows and applies:
- structure, rules, standards for the maintenance of route control devices, control switch locks, electric pole communication and signaling systems, mechanical and electrical characteristics of electromagnetic system devices.

1.4. An electrician for the maintenance and repair of signaling, centralization and blocking devices of the 6th category is appointed to the position and dismissed by order of the organization (enterprise / institution).

1.5. An electrician for the maintenance and repair of signaling, centralization and blocking devices of the 6th category reports directly to _ _ _ _ _ _ _ _ _ _ .

1.6. An electrician for the maintenance and repair of signaling, centralization and blocking devices of the 6th category directs the work of _ _ _ _ _ _ _ _ _ _ .

1.7. An electrician for the maintenance and repair of signaling, centralization and blocking devices of the 6th category during absence is replaced by a person appointed in the prescribed manner, who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

2. Description of work, tasks and job responsibilities

2.1. Keeps in good condition, carries out current repairs, replacement of route control devices with control arrow locks of the electric wand system, semi-automatic blocking, overhead and cable signaling and communication lines; serves electromechanical autostops of point type and devices for speed control; performs primary mechanical and electrical regulation of the signaling equipment of electromagnetic systems in repair and technological areas; copies and updates technical documentation.

2.2. Knows, understands and applies the current regulatory documents relating to its activities.

2.3. Knows and fulfills the requirements of regulatory acts on labor and environmental protection, complies with the norms, methods and techniques for the safe performance of work.

3. Rights

3.1. An electrician for the maintenance and repair of signaling, interlocking and blocking devices of the 6th category has the right to take actions to prevent and eliminate the occurrence of any violations or inconsistencies.

3.2. An electrician for the maintenance and repair of signaling, centralization and blocking devices of the 6th category has the right to receive all social guarantees provided for by law.

3.3. An electrician for the maintenance and repair of signaling, centralization and blocking devices of the 6th category has the right to demand assistance in the performance of his duties and the exercise of rights.

3.4. An electrician for the maintenance and repair of signaling, centralization and blocking devices of the 6th category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision of the necessary equipment and inventory.

3.5. An electrician for the maintenance and repair of signaling, centralization and blocking devices of the 6th category has the right to get acquainted with draft documents relating to his activities.

3.6. An electrician for the maintenance and repair of signaling, centralization and blocking devices of the 6th category has the right to request and receive documents, materials and information necessary to perform his job duties and instructions from the management.

3.7. An electrician for the maintenance and repair of signaling, centralization and blocking devices of the 6th category has the right to improve his professional qualifications.

3.8. An electrician for the maintenance and repair of signaling, centralization and blocking devices of the 6th category has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.

3.9. An electrician for the maintenance and repair of signaling, centralization and blocking devices of the 6th category has the right to familiarize himself with documents defining the rights and obligations of his position, criteria for assessing the quality of performance of official duties.

4. Responsibility

4.1. An electrician for the maintenance and repair of signaling, centralization and blocking devices of the 6th category is responsible for failure to fulfill or untimely fulfillment of the duties assigned by this job description and (or) non-use of the rights granted.

4.2. An electrician for the maintenance and repair of signaling, centralization and blocking devices of the 6th category is responsible for non-compliance with the rules of internal labor regulations, labor protection, safety, industrial sanitation and fire protection.

4.3. An electrician for the maintenance and repair of signaling, centralization and blocking devices of the 6th category is responsible for disclosing information about an organization (enterprise / institution) that is a trade secret.

4.4. An electrician for the maintenance and repair of signaling, centralization and blocking devices of the 6th category is responsible for non-fulfillment or improper fulfillment of the requirements of the internal regulatory documents of the organization (enterprise / institution) and the legal orders of the management.

4.5. An electrician for the maintenance and repair of signaling, centralization and blocking devices of the 6th category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. An electrician for the maintenance and repair of signaling, centralization and blocking devices of the 6th category is responsible for causing material damage to an organization (enterprise / institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. An electrician for the maintenance and repair of signaling, centralization and blocking devices of the 6th category is responsible for the misuse of the granted official powers, as well as their use for personal purposes.

The signaling electrician is appointed to perform maintenance and repair of elements of the signaling devices and ensure their good condition. The CCS electrician reports directly to the CCS electrician.

The CCB electrician is obliged to:

Know the signaling devices that are serviced, be able to perform plumbing and installation work, as well as use the necessary measuring instruments and tools.

Systematically improve knowledge, work methods, master and apply advanced methods of servicing signaling devices.

Perform maintenance and repair of signaling devices in accordance with approved maintenance schedules, eliminate failures that do not require the opening of sealed devices and turn them off. Ensure the safety of train traffic during the performance of work, comply with the requirements of the rules for the protection of work and fire safety.

Upon receipt of a message about a failure in the operation of signaling devices, arrive as soon as possible to eliminate, find out the situation that has developed and report to the shift engineer of the distance and the senior electrician of the signaling system or electrician of the signaling system. It is allowed to start restoring the normal operation of signaling devices only after obtaining permission and a plan for further actions from the shift engineer or the management of the signaling and communication distance.

If it is impossible to independently identify and eliminate the failure, immediately inform the shift engineer of the distance and the senior electrical engineer of the signaling system or the electrician of the signaling system about this.

If, when eliminating the failure, it turns out that it is necessary to turn off individual devices (devices) or disclose devices that are under seals, then it is necessary to obtain permission from the shift engineer of the distance, make an entry about this in the inspection log form DU-46, where you indicate the reason for removing the seal, position and last name an employee who allowed the seals to be removed, and to obtain the consent of the station duty officer, who certifies this with a signature in the inspection log of form DU-46. It is prohibited to start disabling or opening signaling devices and eliminating the failure without the specified higher clearance.

Electricians of the CCS of the V and VI categories may have, by decision of the head of the signaling and communication distance, a sealing vise with a personal impression number. At stations where the shift mode of work of CCS electricians is established, separate sealing vices are not issued to CCS electricians.

After completing the work related to the opening of the devices, seal the latter and make an entry about this in the inspection log of form DU-46. In the absence of a vice, the signaling electrician must be near the unsealed devices until the signaling electrician arrives.

After eliminating the refusal, make an entry in the inspection log form DU-46 in accordance with the requirements of the Instruction for Ensuring the Safety of Train Traffic when Performing Maintenance and Repair of CCS Devices. The time of elimination and the reason for the failure should be reported to the shift engineer of the distance.

When performing repair or construction and installation work within the site that is serviced, special teams or organizations ensure that the work is carried out in the prescribed manner. In case of violation of the rules for the performance of work or the performance of work without agreement, demand their immediate termination with a message about this from the CCS electromechanic, and in his absence to the senior CCS electromechanic and the shift engineer of the distance.

Timely and efficiently prepare signaling devices that are being serviced for operation in winter conditions.

Carry out an extraordinary inspection of the signaling devices at the direction of the signaling electrician and eliminate the malfunctions that have arisen, after each natural phenomenon, the consequences of which may affect the operation of the signaling devices (storm, ice, drifts, etc.).

Perform other work related to the maintenance and repair of signaling devices as directed by the signaling electrician.

§ 433. Electrician for signaling, centralization and blocking of the 2nd category

Job Description. Installation and sealing of fasteners. Removing the upper jute cover of the cable by hand. Production of small fasteners and gaskets that do not require precise dimensions. Manual driving of earth electrodes. Coloring of wires, cables and tires. Shelter of cable in trenches and channels. Punching nests, holes and furrows according to the finished marking manually.

Must know: established road signs and signals; main brands of wires and cables; steel grade; basic materials used in the manufacture and installation of electrical structures; main types of fasteners and small structures; the main types of tools used in electrical work.

§ 434. Electrician for signaling, centralization and blocking of the 3rd category

Job Description. Cable cutting up to 10 kV with temporary termination of the ends. Installation of insulators on uninstalled structures. Installation of dowels. Sealing of passages for all types of wiring and tires. Rolling out wires and cables with the installation of drums. Installation of grounding networks and zeroing devices. Painting of mounted equipment. Removal of distribution points (cabinets) of closed or open type. Dismantling of simple devices and devices (support insulators, knife switches and switches with a lever drive, fuses, rheostats, current and voltage transformers, etc.). Processing of places of welding in the mechanized way. Hole punching with power tools. Installation of junction boxes for cables and wires.

Must know: main types of fasteners and fittings; arrangement of applied devices, electric devices, electrified and pneumatic tools; electrical diagrams of the installed equipment; device and methods of using the used rigging means; types of welding equipment used in electrical work, and rules for using it.

§ 435. Electrician for signaling, centralization and blocking of the 4th category

Job Description. Connection, termination and connection of wires, cables of all brands with a cross section of up to 70 mm2 in various ways, except for welding. Installation of protective devices, casings and fences. Marking of laid pipes, cables and bends. Fastening structures and devices using a mounting piston gun. Welding of tips to conductors of cables and wires. Testing and regulation of electromagnetic current and voltage relays. Installation of staples and metal support structures. Fastening structures by gluing. Laying steel and plastic pipes in furrows. Laying cable trays and perforated mounting profiles. Acquisition of materials and equipment for electrical work on engineering structures. Installation of cable racks, relay and transformer boxes, unified couplings, chokes and grounding for guard and floor devices. Switching blank for electrical wiring. Installation and connection of devices in relay cabinets, battery wells and on relay racks. Laying the signal cable. Cable connection to the traffic lights installed on the bridge. Installation and installation of the input cabinet of the block apparatus. Cutting the ends of a cable with plastic insulation. Preparation of wiring harnesses for the installation of mast traffic lights. Installation of wiring of all kinds. Installation of relay and transformer boxes and cable racks. Installation of battery well shields. Soldering wires when installing cable boxes.

Must know: installation of mounted electrical equipment; the order of the layout of the reinforcement; methods for measuring insulation resistance; electrical diagrams of the installed equipment; ways of connecting, terminating and connecting wires and cables of all brands with a cross section of up to 70 mm2; methods of marking steel and plastic pipes, cables and bends; rules for slinging and moving goods; device and methods of using mechanized rigging equipment; the device of construction and assembly pistols and the rules for their care; purpose and rules for the use of relay protection; operating principle and overcurrent protection schemes; rules for the acquisition of materials and equipment for performing electrical work on engineering structures.

§ 436. Electrician for signaling, centralization and blocking of the 5th category

Job Description. Installation of commutations in turnout electric drives. Installation of relay cabinets, battery wells and boxes, relay racks. Signal cable cutting in terminal group, connecting and unified couplings. Cable connection to signaling devices (post, relay box). Connection of signal cable conductors with jointing and continuity. Checking signal cables. Cable laying in the ground and along structures with installation of the structure. Installation and inclusion of ABN-72 batteries in battery wells. Installation and installation of cable boxes, installation and connection of track indicators. Installation and connection of rod devices.

Must know: electrical circuits of the installed electrical equipment and methods for their verification; rules for marking the places of installation of supporting structures, equipment and routes for laying wires, cables and tires; rules for making measurements and drawing up sketches of individual wiring assemblies for manufacturing at stands and in workshops; rules for assembly and fastening of open and shielded busbars; the order of phasing of the completed wiring and methods for checking the completed circuits; methods for checking and adjusting control, signaling and automation devices; isolation characteristics of transformers.

§ 437. Electrician for signaling, centralization and blocking of the 6th category

Job Description. Installation of traffic lights, light indicators, shunting columns, switch centralizers, remote displays. Re-installation of block devices. Installation and connection of supply and distribution devices at the posts of electrical interlocking. Contact-by-contact verification of the installation of signaling devices according to the circuit diagrams. Regulation of station and floor devices for electrical interlocking and signaling of automatic blocking distillation units. Switching signaling devices without shutting down. Turning on and regulation of devices on devices of mechanical interlocking and semi-automatic blocking.

Must know: methods of cutting and mounting control cables; designs of switchboards, consoles, control and protection boards; electrical circuits, methods for checking and regulating the installed electrical equipment; methods of installation of wires and cables of all brands; technical characteristics of transformers; arrangement of electrical installations; technical conditions for the commissioning of electrical equipment; rules for performing work in hazardous areas; rules for the implementation of relay protection of mounted equipment.

Requires secondary vocational education.

Work electrician stsb vacancies electrician stsb in Moscow. Jobs electrician stsb from a direct employer in Moscow job advertisements electrician stsb Moscow, vacancies of recruitment agencies in Moscow, looking for a job electrician stsb through recruitment agencies and from direct employers, vacancies electrician stsb with work experience and without work experience. The site of announcements about part-time work and work Avito Moscow job vacancies electrician stsb from direct employers.

Work in Moscow electrician stsb

Site work Avito Moscow work fresh vacancies electrician stsb. On our site you can find a highly paid job electrician stsb. Look for a job as an electrical engineer in Moscow, view vacancies on our job site - a job aggregator in Moscow.

Avito jobs Moscow

Work electrician stsb on the site in Moscow, vacancies electrician stsb from direct employers Moscow. Vacancies in Moscow without work experience and highly paid with work experience. Jobs electrician stsb for women.

Electrician CCB 4th category

Job Description.

1. Maintenance, current repair, installation, adjustment of the mechanical parts of drive locks, compensators and lines of flexible rods of mechanical interlocking, switch and signal locks of route control devices.
2. External cleaning of floor devices of railway automation and telemechanics.

Must know:

Arrangement, rules and norms of maintenance, repair, installation and adjustment of the mechanical parts of drive locks, compensators and lines of flexible rods of mechanical interlocking, switch and signal locks of route control devices, semaphores;
- ways to eliminate damage to signaling, centralization and blocking devices;
- fundamentals of electrical engineering and mechanics.

Electrician CCB 5th category

Job Description.

1. Maintenance of electrical interlocking devices, automated and mechanized sorting humps, pneumatic mail networks, automatic and semi-automatic blocking, automation at crossings, crossing barrier devices, floor automatic speed control devices.
2. Installation of cable networks.
3. External and internal cleaning, checking the fastening of equipment parts, soldering a fuse link, checking traffic lights at repair and technological areas.

Must know:

Device, rules, norms, technology of maintenance, repair and installation of floor devices and cable networks of electrical interlocking, automated and mechanized sorting humps, automatic and semi-automatic blocking, automation at crossings, crossing barrier devices, pneumatic mail;
- ways to eliminate damage to outdoor signaling, centralization and blocking devices;
- technology of disassembly, assembly of alarm equipment, centralization and blocking, checking of traffic lights, soldering of the fuse fuse.

Electrician CCB 6th category

Job Description.

1. Maintenance of automatic blocking devices with tone track circuits and measurement and regulation of current parameters of automatic locomotive signaling, dispatcher interlocking.
2. Determination of damage to floor devices for signaling, centralization and blocking and their elimination.
3. Repair, installation and adjustment of floor signaling, centralization and blocking devices.

Must know:

The device and principle of operation of automatic blocking devices with tone track circuits, dispatcher interlocking systems, automatic locomotive signaling; algorithm and methods for eliminating damage to outdoor signaling, centralization and blocking devices;
- the procedure for measuring and adjusting the current parameters of the automatic locomotive signaling;
- technology of repair, installation and adjustment of floor devices for signaling, centralization and blocking.

Electrician CCB 7th category

Job Description.

1. Maintenance of automatic brake control systems and track circuits equipped with automatic locomotive signaling devices.
2. Maintenance of wagon retarders, their assembly and adjustment at repair sites and on the way.
3. Replacement of wagon retarders on a marshalling yard.
4. Maintenance, adjustment and replacement of pneumatic mail blower units for forwarding cargo documents.

Must know:

The device and principle of operation of automatic brake control systems;
- electric circuits of serviced devices;
- mechanical and electrical characteristics of code and electronic equipment, surge protection devices.

Requires secondary vocational education.

Electrician CCB 8th category

Job Description.

1. Maintenance of automatic blocking devices, electrical, dispatching, hump centralization, made on the basis of microprocessor technology.
2. Determination of damages and their elimination.
3. Performing adjustment and installation work.
4. Replacement of instruments and equipment in existing alarm, centralization and blocking devices.
5. Maintenance of devices and replacement of faulty units of electronic equipment and equipment on microprocessor technology in signaling devices, centralization and blocking of hump yards.
6. Maintenance of floor automatic speed control devices, wagon retarders, assembly and adjustment of them at repair sites and on the way, replacement of wagon retarders on a marshalling yard.
7. Maintenance, adjustment and replacement of pneumatic mail blower units for forwarding cargo documents.
8. Maintenance of multi-valued automatic locomotive signaling devices
(ALS-EN).

Must know:

Electrical and wiring diagrams of automatic blocking devices, electrical, dispatching, hump interlocking, automatic locomotive signaling, as well as automatic speed control devices;
- methods and techniques for detecting and eliminating failures in the operation of serviced devices;
- rules for switching off existing signaling, centralization and blocking devices;
- the procedure for checking the dependencies of arrows and traffic lights;
- rules for the operation of electronic devices and devices based on microprocessor technology.

Requires secondary vocational education.

professional standard by profession - .

Education by profession - .

news

Coordination of railway training programs

The requirements for professions that determine professional standards and the development of technologies are constantly changing, in connection with this, the process of changing, adjusting and updating curricula, in particular for railway professions, is constantly going on. Last week, we received training programs agreed and approved by the Ministry of Transport and the Federal Agency for Railway Transport for professions:

Learning to operate a railway crane

Last week, the theoretical training of a railway crane operator was completed. It was the railway crane operators who studied, taking into account all the specifics: shunting, signaling and safety rules on the railway ... The course focused on cranes KDE-251 and KZhDE-25, as well as EDK-1000/2 with increased load capacity up to 125 tons.

Next week, students will go to our training ground, where they will put into practice their theoretical knowledge under the guidance of experienced instructors.

Introduction to oil and gas production

Where does oil come from? How is it mined and what is it processed into? How are drilling rigs built, drilled and completed wells?

All this was discussed at the course "Introduction to oil and gas production", which was held by specialists from the oil and gas division of PromResurs last week.

Although the course has ended, we will be happy to repeat it for you.

The course will be useful to you if:

We studied: Training of galvanizers

There are a little more people who have mastered a qualified specialty, Hooray!

Our specialists conducted another training for the employees of the electroplating shop with the organization of theoretical and practical classes. In the course of practical exercises, work was carried out to cover parts of complex shapes.

Now electroplating will be able to independently perform the declared work, and the company will not spend invaluable time on their training in the process of working on productive parts and will reduce the level of defects in their production.

We are waiting for everyone who has not completed the training yet!

Recruitment of the Railway Crane Operator group in July

Friends, at the end of July, training in the profession of "Railway Crane Operator" will begin.

Training will consist of 2 parts: Theoretical and Practical.

The theoretical part is held from July 31 to August 18, 2017. The training will cover topics such as crane construction, operation, loading and unloading, railway signaling and the basics of maneuvering.

Signalman on the tracks of Russian Railways

The training program for the profession "Signalist" was adjusted to the specialists of the railway department of the training center "PromResurs" in accordance with the requirements of Russian Railways. In particular, the requirements of the labor protection instructions and the job requirements of the signalman, approved by the regulations of the Russian Railways, were taken into account. Also, as part of the training, the mastering of the profession "Road Technician" is carried out - a mandatory requirement when working as a signalman on public tracks.

The conference was attended by almost the entire color of specialists in all areas of distance learning, from the technical to its content.

Useful information that we managed to learn at this event will be introduced into our distance courses.

Wait for innovations!

Educational nonsense

Friends, the other day I read the following in one of the Moscow educational centers: "the absence of a license speaks of the low quality of education and the non-compliance of educational programs with state standards."

Even having a license does not speak about the quality of education! Talking about the quality of education.