Auxiliary materials. Auxiliary materials Adhesive consumption k flex

K-Flex K414 is made specifically for the installation of K-Flex insulation materials, it is sufficiently resistant to weathering and the aging process. Surfaces treated with glue adhere securely and easily and acquire the technical properties of the original material. K-FLEX K414 adhesive is a one-component contact adhesive produced from polychloroprene rubber. This adhesive has a high degree of resistance to various influences and has a long service life. It is produced in metal cans of different sizes: 0.22 l, 0.5 l, 0.8 l and 2.6 l. The temperature of use of K-FLEX K414 glue is from +5 ºС to +30 ºС.

The Fix contact adhesive is based on polychloroprene. Contains no aromatics additives. Specially manufactured for use with NMC insulation materials. It has excellent adhesion to metal surfaces. Not applicable to painted surfaces, asphalt, bitumen and other oil-based surfaces. It is used in more difficult circumstances, when the insulation is subjected to large thermal differences, for gluing shells and connections that have a complex shape (for example, bends, elbows, tees, valves, etc.). The optimum temperature for applying the adhesive is + 20 °C. You can not use it at low temperatures. It is packaged in jars of 0.5 l and 1 l. Recommended for polyethylene foam sheets.

Glue K-FLEX K414 reliably and firmly glues surfaces. This adhesive must first be applied over the entire area to the required heat-insulating material, and then the adhesive is applied in an even layer to the surface to be insulated.

Technical data of K-FLEX K414 adhesive:

The appearance of the adhesive is a liquid from red to yellow.

The density of the material at 23°C is 0.85 g/cm³.

The viscosity of the material at 23°C is 550-750 MPa.

The drying time of the material is 5-10 minutes.

Application temperature is from +5 ° C to +30 °C.

The open time of the material is 10-20 min.

Adhesive temperature range is -40° C to +105 °С.

The shelf life of the adhesive is 12 months when unopened at a temperature of +15 ° C to +25 °С.

K-FLEX K414 is an adhesive based on polychloroprene rubber and designed for bonding products manufactured by K-FLEX coatings IC CLAD SR, AL CLAD, IN CLAD, as well as IC CLAD BK.

Glue K-Flex K-414 price

Glue k-flex k-414 0.5 lt price 434.24 rubles

Glue k-flex k-414 0.8 lt price 620.07 rub

Glue k-flex k-414 2.6 lt price 3632.54 rubles

Glue consumption
300 ml per 1 sq.m. glued surface.

TECHNICAL SPECIFICATIONS K-FLEX K-414

It was specially developed by Italian engineers for gluing foamed rubber insulation of the K-FLEX brand. Glue K-Flex 414 is resistant to ultraviolet rays. The surfaces to be glued with 414 take on the characteristics of the material itself.

K-FLEX K414 Adhesive is a one-component contact adhesive based on polychloroprene rubber.

The glue is designed for bonding K-Flex thermal insulation and AlClad, InClad coatings. The optimum application temperature is 15-20 0 C. The adhesive is produced in a metal container with a volume of 0.2; 0.5; 0.8 and 2.6 liters.

When insulating cold surfaces, K-FLEX glue should be applied to the surface to be insulated and the surface of heat-insulating products. The consumption of K-FLEX K-414 adhesive in this case is 0.3 liters per m² of the bonded surface.

1. Application temperature affects viscosity and drying time.
2. High humidity affects the strength of the seam.
3. Temperatures below the dew point must be avoided.

In order to glue the seams of thermal insulation products, K-FLEX glue must be evenly applied to both surfaces to be glued. It is possible to connect the glued surfaces in 3-5 minutes. When gluing the seams, the surfaces should be pressed together tightly.

Application of K-FLEX k414 adhesive

The adhesive composition is mainly used in heating systems, water disposal, water supply, heating points. It is designed for bonding insulating materials, suitable for IC CLAD BK and SR or IN CLAD, AL CLAD coatings.

Glue K-FLEX K-414 resistant to external influences, and does not lose its qualities under the influence of temperature extremes, atmospheric phenomena. The adhesive composition is resistant to aging, has a long service life. Maintains its quality characteristics at temperatures of -40…+105 °C. The viscosity of the adhesive at 23 ° C can be in the range from 550 to 750 MPa, the density of the composition is 0.85 g / cu. cm.

The use of glue is allowed at positive temperatures (from 5 to 30 ° C). After applying the composition on the surface, they are firmly glued, acquire the qualitative properties of the original insulating material. The warranty period of the product is 1 year when stored at +15…+25 °C.

Glue
Installation of all brands of thermal insulation and coatings K-Flex is carried out by adhesive bonding using a special adhesive. A detailed description of the brands of adhesives, see below in the text.

Very important!
Glue must be mixed before application, even if you used it yesterday.
After applying the adhesive to the material, it is necessary to withstand a short time (50-90 seconds). Glue applied to the surface of the thermal insulation will dissolve it at the micro level and begin to polymerize.
When the dried glue reaches a state similar to the sticky layer on adhesive tape, gluing can be done.
As a result of proper gluing, you will get a "cold weld" joint.

To reduce the drying time of the adhesive, as well as when gluing materials at temperatures close to 0 ° C, it is recommended to add up to 10% K-Flex cleaner to the adhesive.

.
It is not allowed to install thermal insulation on a tape without the use of glue, this is a violation of the thermal insulation installation technology.
Installation work is described in detail in the section

Purifier K-Flex consists of a mixture of solvents and is used for cleaning surfaces before applying adhesive, cleaning adhesive residues from bonded materials to give them an aesthetic appearance, cleaning tools, diluting thickened 414 adhesive or using it for gluing at slightly negative air temperatures.

Specifications

ALCLAD, ICCLADSR, ICCLADBK.

It can be successfully used for gluing heat-insulating materials based on polyethylene, for example Energoflex, Tilit, Thermaflex (Thermaflex)

K-FLEX 425 adhesive is a two-component contact adhesive based on polychloroprene rubber and filler and is intended for gluing coatings INCLAD and thermal insulation brand SolarHT.

Main technical characteristics

Glue K-Flex 467 - winter

Contact adhesive based on polychloroprene rubber for gluing all brands of K-Flex thermal insulation and coatings ALCLAD, ICCLADSR, ICCLADBK.

Main technical characteristics

Specialized one-component adhesive for contact connection and fixation of insulating materials based on rubber. It has high efficiency and allows you to glue the surface in the shortest possible time.

Glue K-FLEX 414 with a volume of 0.5 liters, is one of the most optimal adhesive compositions in its line, due to its small volume. The lid is removed from the jar and the glue is ready for use.

The line of adhesive composition adhesive K-FLEX 414 and their volumes
√ 0.5 liters - with a metal lid. After opening, it is ready for use.
√ 0.8 liters - with a metal lid. After opening, it is ready for use.
√ 2.6 liters - with plastic red cap for large volumes of work. For use requires transfusion into an additional container.

Important! If K-Flex 414 adhesive thickens, it can be brought back to life with a K-FLEX brand cleaner.

Application
√ for connecting rubber tubes of any diameter and thickness
√ for gluing rubber rolls of various thicknesses
√ for fixing on the surface of AL Clad and IC Clad coatings.

You can send your application with the details of the payer by e-mail

Note! The price is per piece.

Do not forget to buy a cleaner with K-FLEX glue!

K-FLEX K414 Adhesive is a one-component contact adhesive based on polychloroprene rubber for bonding K-FLEX products and AL CLAD, IC CLAD SR and IC CLAD BK coatings.

Transportation and storage:

Glue K-FLEX K-425

Adhesive K-FLEX K425 is a two-component adhesive based on polychloroprene rubber and a hardener.

Transportation and storage: At temperatures from +10 °C to +30 °C, avoid direct sunlight. It is allowed to transport products at negative temperatures, in case of freezing, the glue restores its original consistency and properties at room temperature within 24 hours, while the can must be closed. Guaranteed shelf life in original packaging is 12 months from the date of manufacture.

Adhesive K-FLEX K 467

K-FLEX K467 Adhesive is a one-component adhesive based on polychloroprene rubber. The adhesive is a "contact" adhesive and is recommended for the installation of foam and synthetic rubber insulation on pipes and common surfaces located in heating and cooling systems.

Transportation and storage: At temperatures from +10 °C to +30 °C, avoid direct sunlight. It is allowed to transport products at negative temperatures, in case of freezing, the glue restores its original consistency and properties at room temperature within 24 hours, while the can must be closed. Guaranteed shelf life in original packaging is 12 months from the date of manufacture.

* - If the installation temperature is below +10 °C, please contact the specialists of K-FLEX LLC.

Products are certified. The certificate can be downloaded

Designed for sealing seams of protective coatings AL CLAD, IN CLAD and WHITE CLAD when placing objects outdoors.

Transportation and storage: At temperatures from +5 °С to +30 °С. Guaranteed shelf life of sealant in cartridges (0.290 l) is 18 months from the date of manufacture.

Products are certified.

The glue dispenser is designed for uniform and accurate application of glue. The main advantages are reduction of losses, reduction of the amount of working time during the process of applying glue, high speed of glue application.

K-FLEX cleaner is a mixture of organic solvents and is intended for cleaning bonding surfaces, cleaning tools (brushes, spatulas, rollers) and diluting thickened adhesive.

Available in 1 liter containers.

Transportation and storage: At temperatures from +10 °C to +40 °C, avoid direct sunlight. Guaranteed shelf life in original packaging is 18 months from the date of manufacture.

Acrylic paint is water-based, odorless, easy to apply and dry quickly, no pollution and no fading. It is used to cover the insulation both indoors and outdoors, excluding UV ingress. Produced in a volume of 2.5 liters. Paint consumption 0.45-0.5 l / m 2 in two layers.

Transportation and storage:

Products are certified. The certificate can be downloaded.

Acrylic paint is water-based, odorless, easy to apply and dry quickly, no pollution and no fading. Used to coat insulation both indoors and to repair the K-FLEX COLOR system. Produced in a volume of 0.5 liters. Paint consumption 0.45-0.5 l / m 2 in two layers.

Paint color - white, gray, beige, black, green, red, blue.

Transportation and storage: At temperatures from +5 °C to +30 °C, avoid direct sunlight. Avoid freezing. Guaranteed shelf life in original packaging is 12 months from the date of manufacture.

Products are certified. The certificate can be downloaded.

Designed for punching holes in K-FLEX AL CLAD and PVC coatings for its further fixation with K-PACK rivets. Has a plastic handle.

Rivets K-PACK are made of PVC and designed for mechanical fastening of longitudinal and transverse overlaps of PVC, AL CLAD and WHITE CLAD coatings.

Packing (1000 pcs.)

Plastic clips are designed for temporary fixing of longitudinal and transverse seams of K-FLEX PE foamed polyethylene thermal insulation to ensure full adhesion of glued insulation seams to each other.
Packing (100 pcs.)

A special end cap is required for accurate finishing of the ends of insulated pipes. For the convenience of identifying pipes in the system, the plugs are produced in the following types: silver, gray, red, blue. End cap length 10 m.

Example 18 x 32: where 18 mm is the length of the petals, and 32 mm is the width of the blanking tape, it is installed on the end.

Designed for mechanical fixation of K-FLEX plates to non-horizontal surfaces.

The assembly knife is intended for cutting K-FLEX tubular material.
Allows you to make a smooth cut without torn edges.

K-FLEX Mounting Tool Bag

Equipment:

• Universal caliper for external measurements;
• Metal compasses, at least 400 mm long, in a case or with a protective cap;
• Mounting knife, with a steel, narrow, long blade of at least 300 mm with a rounded end;
• Utility knife, 150 mm, offset blades;
• A whetstone for sharpening knives 225 mm or musat (sharpening) with a length of at least 300 mm;
• A miter box with at least three cutting angles of 22.5°, 45°, 90° and a working surface width of at least 120 mm;
• Radiator brush, with short stiff bristles, at least 38 mm wide;
• The brush is flat, with short stiff bristles, 22 mm wide;
• Lacquer marker, with a round (bullet-shaped) white tip, line width: 1-2 mm;
• Roulette 3 meters, in a rubberized case with 3 latches.