Enable internet on android 4.4 2. Proper internet setup on android
On devices running under the Android platform, this is a very common problem.
In any case, it would be useful to understand what are the causes and solutions to this phenomenon.
Banal reasons
Let's start, perhaps, with a number of the most banal reasons why the mobile Internet may not work.
Their list looks like this:
- Negative balance on the phone. To exclude this option, you should check how much money you have in your account. The method may differ depending on the operator.
To find out how to check the status of the account on your phone, you should contact the operator. Most often, the SIM card has both a balance number and an operator number.
- The subscriber is outside the network coverage area. Another very simple and common reason. To exclude this option, you should look at the network indicator in your. An example of this can be seen in Figure 2.
To fix this problem, there is only one way out - to go where the device can normally catch the signal. By the way, a weak network can cause the Internet to simply work very slowly.
Clue: If this indicator always has a low value, even if you come close to the telephone tower with the device, then the problem is not in the network, but in the device itself. Then it should just be taken in for repair.
- The "Data Transfer" option is not enabled in the settings. All modern smartphones have this option. You can easily turn it off in the settings.
True, depending on the specific smartphone model, the location of this item will be completely different. For example, in phones with a platform, it can be found in this way:- go to settings;
- select the item "More ..." (Figure No. 3.a);
- go to the "Mobile network" menu (Figure No. 3.b);
- check the box next to the item "Mobile data transfer" (Figure No. 3.c).
As mentioned above, in different operating systems this item will be in different places, but its name will always be approximately the same.
- There was no automatic registration in the network after it was not there for some time. Such a phenomenon may occur after the subscriber leaves the subway or simply returns from places where the Internet did not work.
This is especially true for networks. In this case, there is also one and only way to fix everything, and it consists in rebooting your device, that is, turning it off and on again.
Depending on this process, it happens in different ways, see the instructions.
Lost settings
To exclude this option, you should go to the Internet settings on your phone and find the items there related to the APN, that is, the access point.
Depending on the model, the location of this item may also differ, but APN will remain APN anyway.
To fix this problem, there are two ways:
- Request settings from the operator.
- Manually set up the network connection.
The easier option is, of course, the first one. To find out how to request these settings, you should contact your operator or visit your mobile operator's website.
Information on the most common of them can be seen in Table 1.
Table 1. Request numbers for obtaining Internet settings for the most popular mobile operators in Russia
As for the rest of the operators, you will need to call the operator and ask him how to get automatic Internet settings.
In most cases, the settings will be set automatically and the user will not even notice it.
Only at the end will he receive a message with the following content: “Congratulations! Internet settings on your phone have been set successfully."
It happens that an SMS arrives, upon reading which the "Install" button appears.
Accordingly, you must click on it and the settings will be installed.
Manual network setup
With manual adjustment, everything is somewhat more complicated. An example of finding access point settings on Android phones can be seen below.
Step 1. Go to the settings, then select the "More ..." item, which is shown in Figure No. 3.a, then select "Mobile network" (Figure No. 3.b).
Step 2 In the menu that opens, open the "Access Point (APN)" item, as shown in Figure No. 4.a.
Step 3 Click on the button to add a new access point. Usually it consists of a simple "+" sign, as shown in Figure 4.b.
Step 4 Fill in the fields "Name", "APN", "Username", "Password", which are highlighted in Figure No. 4.c.
As for the values of these fields, you should also find out about them from the operator, for each network they are completely different.
For the most popular operators, the values of these fields can be seen in Table 2.
Table 2. Internet settings for the most popular operators in Russia
These menu items may be completely different depending on the phone. There are other reasons why the Internet does not work well or does not work at all.
A modern user, when buying a smartphone, is primarily interested in the ability to set up mobile Internet. After all, it is the function of connecting to the World Wide Web that turns the phone from an ordinary means of communication into the most functional device. Download the right application, process email, buy a movie ticket or book a table in a restaurant - the mobile Internet will allow you to complete any such task in a matter of seconds.
In our article, we will tell you how to turn on the Internet on your Android phone through two main modules:
- Network connection using 3G or 4G
- Setup via Wi-Fi hotspot
How to turn on mobile internet on your phone
The first way to access the Internet through an Android smartphone is related to the provision of mobile Internet services by a cellular operator. Make sure your smartphone or tablet is on the main network communication bands. Then connect the tariff that will provide you with an Internet connection. After that, you can start setting up your phone:
- Enter the Smartphone Settings;
- Select the "More" tab;
- Click on "Mobile networks";
- Set network type (4G, 3G, 2G);
- Select an access point and operator if your phone has 2 SIM cards;
- Exit to the main screen;
- At the top of the screen, pull the curtain with the main settings;
- Find the button with the name of your operator and click it.
After that, you will get access to the network. Please note that in the settings on the "Data transfer" tab, statistics of downloaded data are displayed, as well as information on the amount of traffic of applications that use the Internet connection, such as Facebook or Instagram.
You can read about how to choose the best 4G phone in our article.
How to turn on the Internet through the phone using Wi-Fi
It is equally easy to set up the Internet on your phone through a Wi-Fi access point. Make sure that the appropriate communication module is installed in your smartphone. Next, you need to go through the following steps:
- Go to Settings;
- Select Wi-Fi;
- Click on the "Enable" button;
- Select the access point to which you want to connect from the list;
- To access a closed point, you will need to enter a password.
If you repeatedly use the same access point, for example, through a home Wi-Fi router, it is no longer necessary to get into the settings. As in the case of mobile Internet, just pull the curtain at the top of the screen and press the Wi-Fi enable button.
Please note that by setting up the Internet on your phone, you can use your gadget as a router and even connect the Internet via your smartphone to a computer or laptop. Read more about this in the articles "How to connect the Internet through a computer to your phone" and "Using your phone as a Wi-Fi router".
If you have any difficulties in setting up your phone as a modem, they will help you find a solution on the forum of the official Fly website.
To access the Network and further work, you need a powerful and high-quality smartphone, in which the following parameters must be met:
- Large screen for full-fledged work with applications, documents and photos and videos;
- Powerful processor capable of instantly processing numerous requests;
- 4G LTE communication module for high-speed connection;
- A capacious battery that can withstand loads from running communication modules.
This combination of characteristics is fully consistent with the high-quality and affordable smartphone Fly Cirrus 9.
Why fly?
The British company Fly has been producing mobile gadgets for 14 years, in which modern technologies are combined with thoughtful design and affordable price. Thus, the widest range of consumers get access to smartphones with the current version of the Android operating system, a powerful processor, a capacious battery, a high-quality camera, and at the same time spend no more than 150-180 dollars from their budget.
LTE-smartphone Fly Cirrus 9 will be an excellent solution for surfing the Web. The large 5.5-inch IPS screen delivers vibrant, rich colors for great ease of accessing applications, creating and editing documents, and watching videos. A powerful 1.25 GHz quad-core processor ensures multitasking and smooth interface operation. Fans of hanging out on the Web may not consider the percentage of the charge indicator, since a capacious 2800 mAh battery will keep a smartphone in working condition with a running network module for up to 6 hours.
If you find an error, please highlight a piece of text and click Ctrl+Enter.
The setup process may vary depending on the features of the services provided. Generally, there are two types of tuning: automatic and manual. Let us consider in more detail the instructions for connecting the Internet for most popular mobile operators.
Automatic settings
The easiest way to access the internet on Android through a mobile operator - order the automatic configuration service. It is free and does not depend on the operator and on the connected tariff. All the user needs to do is send a request and receive the settings in response. Automatic ordering of special settings will determine the model of the device used and send all the settings as an SMS message.
If, after receiving automatic configuration, the smartphone cannot access the Internet, make sure that:
- You have connected the required tariff;
- There is money on the mobile account;
- The sent settings have been set;
- The phone has been rebooted.
Some Android device models may not support the auto-configuration feature for operators MTS, Life, Beeline and others, so you need to create and connect an access point yourself.
Notice! Most users get automatic settings after the first connection of the SIM card. Check your incoming SMS messages to make sure that the parameters ready for installation have arrived.
To order add-ons from the operator, you need to go to the official website of the company and fill in the required fields, then send a message to smartphone or you can use short numbers:
- MTS - http://www.mts.ua/ru/online-services/settings#settings-auto . To order MTS 3g, also use this site, but remember that you first need to connect a suitable tariff plan so that in the future all money for using high-speed Internet will not be debited from your mobile account;
- Life - dial and execute the command *123*6# or send a standard message with the text INTERNET to number 123;
- Beeline dial the command *110*181# and wait for the settings;
- Megafon - send an SMS with a unit to the short number 5049;
Manual connection setup of the MTS operator
MTS is a major mobile operator that provides its services in Russia, Belarus and Ukraine. If your Android device for some reason cannot load the automatic settings of the operator, you need to configure the network settings manually.
To do this, follow the instructions below:
- Go to the main menu on android;
- Open the settings window and select the "Wireless Network" tab in it;
- Connect the mobile internet function. To do this, check the selected area (Figure 2). Please note that if you do not activate this option, further settings will not allow you to connect to the network;
- Now select the mobile networks window. In the proposed list, find the profile "MTS Internet". If there is no such list item, you must create it yourself. To do this, click on the item "create an APN access point";
- To create an access point manually, you need to enter the following parameters. Name (Name) - MTS, Login and password - mts, access point address APN - internet.mts.ru. The remaining parameters must be left as standard, as shown in the figure below;
Some smartphone models in the authentication type area may contain the value "not specified" by default. In order for the connection to the network to be stable, you must set the value to "No".
To manually configure the Internet for Beeline and Megafon, you need to create a similar access point, you can find out its address by contacting the operator.
Manual setup of the Life operator connection
Life is one of the largest mobile operators in Ukraine.
To set up and connect your Android smartphone to the Internet manually, follow the instructions:
- Go to the main menu of your smartphone;
- Then turn on the settings window and select Connections. Depending on the version of the operating system, this menu item may be called "Mobile communications", "Mobile network" or "Connections". Go to this window and select the "Other networks" option, as shown in the figure below;
- Next, click on Mobile networks;
- Check the checkbox to enable mobile data and then open the hotspot window;
- Press the key to create a new hotspot;
- Then scroll down the window and find two items: to configure the type of access point and the type of verification of its authentication;
- In the authentication window, set the value to PAP;
- In the window for changing the type of access point, write the default value in the text and click on the confirmation button;
- Now the newly created one will be displayed in the access point menu. Select her;
- Reboot your phone. After turning it back on, check if the data transfer mode is enabled in the network settings. Now you can start using the Internet.
Connecting 3G connection
If you want to use 3G Internet connection, you need to configure it on your smartphone. However, first you need to choose the MTS 3g tariff or from other companies, which is focused on high traffic consumption. Otherwise, the charge for using the Internet may be several times higher than the cost of regular 2G.
The first thing you need to do to connect 3g MTS or Life 3g is to get automatic settings or create an access point yourself.
- Click on the network mode selection panel;
- Check box GSM/WCDMA$
- Close settings and restart your phone. Now a high-speed connection will appear on your smartphone that is connected to 3g MTS or 3g Life.
Some versions of Android have a different menu, in order to connect 3g MTS, you need to disable the “use only 2G” networks item in the settings, as shown in the figure below:
Internet access
To access the Internet you need a browser. Before turning it on, make sure that the data transfer mode from the SIM card you need is enabled in the settings. Go to the menu of your device and find the standard browser there. You can also download a third-party browser from the official app store.
After installing the desired browser, turn it on and go to any of the sites. If there is no connection to the Internet, you need to create an access point again or call the operator back. Perhaps your smartphone or tablet model has a special mobile Internet settings system.
Thematic video:
Modern devices based on the Android operating system cannot fully work without an Internet connection. Therefore, novice users of mobile gadgets are often interested in how to connect the Internet on Android. If you are also interested in this question, then this material should help you.
Internet connection on Android via Wi-Fi wireless network
The easiest and most affordable way to connect to the Internet on an Android smartphone or tablet is a Wi-Fi wireless network. To do this, you need to open the Android settings and. Turning on Wi-Fi is done using a small switch, which is located to the right of the Wi-Fi settings section.
After the Wi-Fi switch is set to the “On” position, you need to open the Wi-Fi section. Here you will see a list of all available Wi-Fi networks. Networks protected with a password will be marked with a padlock icon. If the network is not secure, it will be marked with a simple Wi-Fi icon. Select the Wi-Fi network you need and click on its name.
After that, your Android device will try to connect to the Internet using this Wi-Fi network. If the network is not password protected, the connection will be made automatically. If the Wi-Fi network is protected, then you will see a window for entering a password. Enter the password in this window and click on the "Connect" button.
After that, your Android device will connect to the Wi-Fi wireless network.
Internet connection on Android using 3G
The second most popular way to connect to the Internet is 3G technology. , or more simply, mobile Internet, is an Internet connection through a mobile operator. Such a connection is available wherever there is a mobile connection, but often such Internet is paid separately and is much slower than Internet via Wi-Fi. Although there are always exceptions.
In order to connect to the Internet using 3G, you need to open the Android settings and go to the "More" or "More" section.
And open "3G Service".
In this section of settings, you need to enable 3G mode. In some cases, after turning on 3G, you still need to select one of the mobile operators from the list. 
The last step is to set up APN access points. To do this, we return to the "Mobile communications" section and open the "Access points (APN)" subsection.
APN settings depend on your mobile operator. Therefore, to obtain the correct settings, contact the technical support of your mobile operator.
Modern gadgets greatly simplify our lives, but what are they worth if they cannot be connected to the Internet? Yes, many users of mobile devices, smartphones. tablets and other devices, it is difficult to imagine life without access to the World Wide Web. However, the question arises, what to do if you have purchased a brand new Android phone, but do not know how to set up internet on android
Setting up GPRS/EDGE/3G/4G Internet on an Android phone
This article will help you understand not only in general terms, but will demonstrate all kinds of settings. Step-by-step actions will be offered, which will greatly simplify the task even for those who have never faced such a task before.
Where to start
Initially, you should decide what exactly you need from access to the network. This will be the starting point.
If you need network availability and mobility - this is one thing, but if we are talking about connection speed, then things are a little different. Ordinary surfing on web resources and a primitive Android update are absolutely different things and this must be taken into account.
If we talk about the first option, then everything can be done to make the Internet faster and more productive. As a rule, for this, all possible display elements on the resource are disabled through special settings.
The second option involves the so-called end-to-end connection via WiFi (that is, a wireless network). Using the second option, you significantly save not only traffic, but also money.
We will consider both options.
How to enable network access
This is the first practical step you need to take. Having mastered it, you can easily connect network access at any time and disconnect it if necessary. Consider the most common network connection options:
Connecting using a wireless WiFi network.
Here you should select the settings menu on your gadget. To do this, turn on the phone and drag the top menu with your finger down, as shown in the following figure.
Now you need to click on the gear, which will take you to the settings menu
Here you should take into account the fact that icons may differ in different versions of Android, but it will still not be difficult to find it.
Now we see almost at the very top the inscription WiFi and a kind of switch on it. We need to move the slider from Off to On. In some versions, a translation is made from 0 to I. This is the same thing.
Everything, now we have the Internet connected via a wireless network. Tap now on the Wi-Fi icon, you will see a menu where you can enter the necessary data for setup or select the available network options
Of course, you are unlikely to get on the free network, and therefore you need to know the password. Then you select the desired network name, for example "Megaline_1" and enter the code
Everything, now the Internet should work.
Here you should focus on the fact that there are cases when it is not possible to automatically connect to the desired network and there is a need for manual data entry, as we showed above in the screenshots. This introduces many into a real stupor, but there is nothing complicated here, especially since we will now analyze this moment as well.
Go to Settings->Network->WiFi settings. How to get here, we showed in the images a little higher. You need to add a new Access Point or an existing one, but manually. To do this, you must at least know its SSID (in other words, the exact name), password and protection mode.
We will not consider the WPS key, which distributes the Internet for those who wish, in public places. If you want to give access to this network, then you don’t have to press anything.
Actually, this is where the configuration via WiFi ends.
Outcome: the option is good in principle and often free, but its main problem is that as soon as you move away from the distributing point, you lose the ability to connect and you need to look for a new source of free Internet.
This option should be used when you are at home and you have a device that distributes the Internet via a wireless network;
Setting 3G/4G/GPRS/EDGE/ and internet via ISP on android
Here things are much more complicated, especially for beginners. The task can be greatly facilitated if you have automatic network settings that the operator gives for your mobile device. If this function does not work or it is not possible to determine the device (which often happens in the case of Chinese copies of famous phones or your own models), then you need to enter everything manually.
But there is another problem - this is the need to enter exact parameters for each operator. In this article, we will provide settings for each type of popular providers.
We go to the network settings in the same way as we did with WiFi, only now we select " other networks»
And we get into such a menu, scroll down
Apparently there are 2 points below
Fill in the first paragraph
Fill out the second paragraph
That's all, now we see our Internet in the settings
There was also a very simple option for setting up using the most convenient Mobile.Yandex service. Now for some reason it either does not work, or it works, but not correctly. What was its essence:
- We select the operator you use from the list, after which the model of your smartphone or tablet is entered;
- The number is indicated in the international format;
- When you receive SMS with the necessary settings, you immediately install them in your gadget.
- After saving the settings, the Internet will work for you.
Agree that it was not a very convenient way, but we were able to do it ourselves and learned how to set up the Internet on android. At the same time, there is no difference whether to set up the Internet on a tablet or on a phone, since the Android OS system is the same!
How to enter parameters for connecting to a mobile Internet operator
Setting up the Internet by Rostelecom on Android or setting up the Internet on Android Tele2 is also simple. You just need to visit the official website of the required operator and enter the parameters. It will be even easier to call the operator, and he will dictate to you all the necessary data.
Outcome:setting up the Internet on Android ncc is not so difficult. But its effectiveness is many times greater than in the case of the first option. Just keep in mind that the cost of such an Internet is quite expensive and not everyone can afford to constantly be on the Internet with very expensive tariffs.
How to choose an operator for mobile Internet
A common question on the Internet, approximately the same as the question - how to set up an Internet motive on Android. Study all the offers from different operators, look at promotions, bonuses, profitable programs for providing mobile services, study all the packages and then make a choice.
Conclusion: I recommend that you use both options. WiFi will allow you to update the system, download applications, chat on Skype, even watch videos or listen to music online. And the second option is ideal for surfing the vast global network. However, do not forget that everything rests not so much on money, but also on what you want to receive from your Internet.
Thank you all if the article was useful to you say Thank you!
Do you have any questions? Ask!
Were you interested in this news?