Combined bathroom with toilet in Khrushchev. Modern renovation ideas for a combined bathroom in Khrushchev

Buildings, called "Khrushchev", make up a large share of the housing stock. Most often, the apartment requires a global redevelopment so that all the necessary elements can be placed. As for the bathroom, the situation becomes critical there, because there is a catastrophic lack of space. Sometimes you have to sacrifice one or another type of plumbing. How to competently re-plan the bathroom and how to fit everything you need on a few square meters? What bathroom design in Khrushchev will be optimal?

Peculiarities

Unfortunately, there are not so many places for the manifestation of fantasy in the Khrushchev bathroom. That is why it is necessary to carefully consider the location of each element of the room in order to rationally use the available space.

The peculiarity of the interior in this case is the maximum combination of functions in one element. There should be nothing superfluous, only the most necessary.

On the features of repairing a bathroom in Khrushchev and combining a bathroom and toilet, see the following video.

The best option is to combine a bathroom with a toilet. If the layout of the apartment allows, you can also grab part of the corridor.

Difficulties of repair

Khrushchev houses are distinguished by the inconvenience of the initial layout of the space. At the same time, there is a catastrophic lack of space to accommodate all the interior items necessary for a modern person. If the bathroom is separate, this further exacerbates the situation.

That is why the best option would be redevelopment - combining the toilet and bathroom. And although this will not completely solve the problem of a modest area, it will somewhat expand the possibilities for maneuvers.

So, from the problem of lack of space, another follows - the additional costs of dismantling the wall partition.

Another problem is the inconvenient location of communications. Most often, plumbing has to be installed far from the main risers. In this regard, it is necessary to additionally do the wiring of water pipes, trying to save space as much as possible.

You can try to hide communications in the walls, provided that space is preserved. At the same time, it will be possible to level the walls, because during the construction of the Khrushchev houses, the builders were not particularly worried about the evenness of the surfaces. Sometimes it's easier to build a wall again than to try to level what was.

We increase the area of ​​\u200b\u200bthe room - redevelopment

Naturally, the best way out of the situation is to combine the toilet and bathroom into one room. If this option is not possible for one reason or another, it remains only to consider the location of the plumbing and select the most miniature models. In critical cases, the washbasin can not be installed, but a faucet above the bath can be dispensed with.

Relevant is the use of corner models of plumbing. If you use a sink and toilet without steps, there is additional space for a washing machine, a laundry basket, and various little things. However, at the same time, it is necessary to hide the pipes and fastening in the wall, which will “eat” the area of ​​​​the room somewhat.

When choosing a style for the interior of a bathroom in Khrushchev, it is necessary to take into account the limited space of the room.

Styles

Minimalism

Minimalism is the best option. In this case, there is no problem with unnecessary details, everything is strict and neat.

Small-looking boxes are able to accommodate a huge number of jars and tubes. The conciseness of the forms visually expands the space.

Japanese

A bit similar to minimalism is the Japanese style. It is ideal for a small space. As an original decor element, a composition of tiles in the form of a sakura branch can act. True, you will have to work hard to find the right tile.

High tech

Lovers of high technology and cool colors can make a high-tech bathroom. The predominance of glass surfaces, metallic sheen, mirrors and original lamps will expand the space.

Modern

Visually expand the space

When it is impossible to enlarge the room physically, methods of visual expansion of space come to the rescue.

In the bathroom, for this purpose, the play of light and shadow, accents and some other tricks are used:

• the ceiling is made in light colors, the glossy surface visually makes it higher;
• vertical stripes on the walls elongate the room, while horizontal stripes make it wider;
• the alternation of colors creates the illusion of an increase in area. The tiles can be placed with diagonal inserts of a darker color or laid out alternately with rectangle frames in contrasting shades;
• the floor is covered with dark tiles located diagonally;
• mosaic allows you to create the illusion of compactness on the protruding elements of the bathroom;
• light tones expand the space, and when combined with dark ones, a depth effect is created;
• mirror surfaces allow you to visually push the walls apart;
• spot lighting will also help solve the problem of lack of space;
• suspended plumbing expands the space due to the open floor;
• strict lines help get rid of the feeling of clutter;
• the absence of small details and excessive decor frees up space not only physically, but also visually;
• glass looks much lighter than other materials and takes up less space.

Color solutions

Dark colors, as you know, narrow the space, so you need to focus on light and bright shades. Dark inserts can be used to create an effect of depth, highlight zones, or visually expand a space with horizontal or vertical stripes. The emphasis should be on decorative inserts.

The best combination of colors for a modest-sized bathroom are light colors with elements of tropical mixes, as well as a marine theme. The combination of blue, turquoise and sand shades always looks organic and attractive.

Read more in our article on blue bathroom.

The combination of milk and chocolate shade always wins. The walls in this case are made in light colors with accent points in the form of dark stripes or inserts, and the floor is tiled with dark tiles. A combination of milky walls with dark furniture will also be advantageous.

Finishing

Since the bathroom in Khrushchev is very small, it is necessary to take seriously the choice of finishes and the design of the ceiling, floor and walls.

Ceiling

To visually increase the height of the room for the ceiling, it is necessary to select materials in light colors. The best option is painting or plastic panels.

If the ceiling height allows, you can make a glossy stretch ceiling, it will create the illusion of infinity. It would be nice to mount spotlights in it.

Walls

For wall cladding, it is best to use tiles or mosaics. You can also use paint, but this requires a perfectly flat surface, and the walls in Khrushchev, as you know, are not even. The tile forgives minor surface defects due to the application of an adhesive solution. In addition, with its help, you can visually expand the space by combining tiles with zones or alternating colors.

Floor

The color of the floor should be slightly darker than the main one.

The tiled floor definitely looks more advantageous, since the diagonal laying method allows you to expand the space visually. In order not to be injured on a wet floor, tiles must be selected with an anti-slip coating.

Choosing plumbing

The second crucial moment in the repair of the bathroom is the selection of plumbing. Given the small size of the room, it is worth opting for compact and practical models.

It is better to replace the bathroom with a shower.

If you are not ready to make such sacrifices, then the best option would be a corner bath.

Remember that even small bath models can be equipped with a hydromassage function.

You can install an ordinary rectangular model by closing it with a false panel with removable elements. Thus, it will be possible to use the area under the bath for storing detergents and basins.

Tiled sides will serve as a shelf for shampoos and gels.

It is best to choose a sink without a footboard. The tulip model will only take away valuable space under the washbasin. With the wall mounting method, you can place shelves for storing things or a washing machine under it. A good option is a corner washbasin with a cabinet, especially if the sink is of an overhead type. Above the bathroom itself, you can place several corner shelves.

The glass sink looks light and airy, although it costs a little more than usual.

The toilet model is also better to choose a hanging one. A solid installation can withstand a weight of up to 200 kg, so you can not be afraid that the structure will collapse under the weight of a person.

To save space, you can place the sink above the bathroom.

Shower with floor drain

An excellent option in order to save space is a shower with a drain in the floor. Its main advantages: compactness, lack of high sides (which is important for people with disabilities and pensioners) and minimizing the risk of flooding neighbors from below. The only moment is that the floor will rise a dozen centimeters so that a drain ladder can be installed.

Hiding a washing machine

The main problem of bathrooms in Khrushchev is the location of the washing machine. It also does not make sense to transfer it to the kitchen, because there is also a problem with a lack of space. Therefore, the best option is the hidden location of the washing machine. Of course, the technique of standard dimensions is not a very suitable option. Therefore, it is worth paying attention to models of shallow depth.

Maximum practicality with the minimum area of ​​​​the combined bathroom. 3-4m, 2 allotted in Khrushchev to solve small and big problems, leave no room for a flight of fancy. I would like the territory so important for everyday life not to look like an elevator cabin. If we are not talking about redecorating the combined bathroom in Khrushchev, but first of all about a serious redevelopment and turning it into a comfortable office for personal needs, it is worth seriously working with a photo of the combined bathrooms after a real repair.

No matter how beautiful the design solutions are in advertising offering turnkey renovation of a combined bathroom, real solutions in practice are very different from magazine projects.

Among the general variety of wall and ceiling design solutions, the most practical repair options are:

• The use of tiles;
• Use of PVC panels;
• The use of waterproof drywall;
• Use of decorative panels made of modified wood.

But not always the use of modern high-quality materials in the repair of a combined bathroom saves from failed decisions.

A small room of a combined bathroom of 3 sq.m or 4 sq.m, decorated with high-quality dark tiles, makes the atmosphere heavy. You can truly appreciate the result of the repair and the splendor of the finish only if there is a large window and sunlight, which never happened in Khrushchev. Replacing sunlight with imitation lamps will not work. In addition, the dark surface of the decor shows dirt and traces of dried moisture more than the light one.

The correct layout of the combined bathroom

Before starting repairs, it is worth soberly assessing the possibilities and choosing what you can refuse in order to increase the free space in the combined bathroom. Pay attention to the classic solution to the Khrushchev problem in the photo. Thanks to the replacement of the bathtub with a shower cabin in the center of the combined bathroom, it turned out to be quite large, as for Khrushchev, free space.

Successful solutions in the repair of a combined bathroom include:

• High-quality execution of the floor, successfully combined in color, without closed niches and blocks;
• Hinged plumbing options add space underfoot;
• The location of the washing machine in the combined bathroom - often only for the sake of this they carry out repairs and redevelopment of the bath-toilet in Khrushchev.

The first redevelopment option is associated with a large amount of work to change the sewer and water communications in the combined Khrushchev office. Separating a shower cabin and a toilet bowl on one side and a washbasin with a washer on the other requires laborious laying of drain pipes in wall niches, taking into account restrictions on their length, which is not always achievable in small areas of Khrushchev.

The use of ceramic and tile in repairs

High-quality ceramic tiles have always been the most commonly used material for decorating and renovating bathrooms. The use of tiles requires significant costs, sometimes leads to a decrease in the internal volume of the combined bathroom, especially if the walls are curved, it requires leveling the base with drywall or carrier plaster.

Alternatively, a combined solution is possible - a combination of tiles and walls finished with waterproof plasterboard, followed by a coating that imitates rough plaster. The effect is important - lower costs and an excellent combination of different techniques, which is normal for Khrushchev.

Almost no alternative is the option of laying tiles on the floor. A bathroom with a washing machine, and even more so a bathroom in Khrushchev, has always been and remains a source of possible emergencies associated with spilling a large amount of water on the floor.

To reduce the adverse effects, before laying the tiles, it is advisable to perform a self-leveling floor with waterproofing and an entrance door threshold raised by 3-4 cm. In this case, twenty liters of water spilled out of the washing machine will not go beyond the combined bathroom and will not cause a scandal with the neighbors on the floor below.

A special corrugated coating will firmly hold the tile on the base for at least 10 years. Advantages of ceramic tiles:

• Easy to clean with any cleaning products;
• High resistance to abrasion and exposure to adverse microflora;
• Under the influence of moisture, heat and light does not fade and does not emit harmful substances.

The disadvantages include the high cost of the material and professional work on its installation. Laying or gluing tiles is estimated at about half the price of the material.

Although it is difficult to imagine that the owner of a Khrushchev apartment would use expensive Spanish or Italian handmade ceramics to repair a combined bathroom, laying tiles even in a small space of 2x2m will cost most of the repair budget.

Therefore, in order to reduce prices without loss of quality, inserts from spectacular tile sets are often used against the background of a cheaper solid array. In some cases, the tile is laid only in places of intense condensate sweating or direct water ingress, replacing the rest of the wall with a water-resistant plasterboard painted to match.

Use of PVC panels

The most budgetary and affordable option for repairing a combined bathroom in Khrushchev is to use PVC tiles or panels and waterproof drywall.

Both materials are successfully used for technical purposes - primarily to hide communications and pipelines, insulation of valves, taps and meters.

The boards can be glued on prepared and glued surfaces. This approach practically does not reduce the internal volume of the bathroom. In the case of decorating decorative boxes, a building frame profile is used. Next, PVC slabs or panels are glued, completely imitating expensive varieties of ceramic or marble tiles. For a combined bathroom in Khrushchev, this is the most affordable option.

The most problematic place in the Khrushchev bathroom has always been the ceiling. Repairing the always uneven ceiling surfaces required exceptional funds. The ideal solution to the ceiling problems was a set of PVC panels mounted on a metal frame.

This option has a number of advantages in the repair of a combined Khrushchev bathroom:

• Easily passes air and retains water vapor;
• Lightweight design is firmly held by a metal frame;
• The subceiling space is easily used for laying additional wiring and pipes.
• Easy to clean, will not rot, corrode, warp or sag.

Important ! If the neighbors living on the floor above regularly ruin the ceiling of your bathroom with regular floods, the only option is to use PVC panels.

PVC panels can be called a versatile material that can correct the appearance of walls or even the layout of a bathroom. Hidden niches are made from it for storing chemicals and hygiene products, screens that close the space under the bathroom, air ducts that help to ventilate the room of the combined bathroom with high quality.

Increased humidity from a large amount of water in the bathroom requires not just ventilation, but the creation of a ventilation system with hidden air ducts and an electric fan. Without ventilation, odors and moisture will eat into the walls of the Khrushchev bathroom.

The local air exhaust system has proven itself perfectly, providing 3-4-fold air exchange in the area of ​​​​the toilet bowl and shower cabin. During the repair, flat air ducts with wiring are mounted on the ceiling of the bathroom, covered with a ceiling made of MDF panels or drywall. A more serious modification can provide stable ventilation of the entire Khrushchev, and not just a combined bathroom.

A more expensive decor option for the ceiling of the bathroom is stretch ceilings, which give a beautiful appearance, but the cost of installing them, even for a room of 3 sq.m, turns out to be prohibitively high, given the status of Khrushchev housing.

To all the positive points, it is worth adding a negative one. The supply and exhaust ventilation device in the Khrushchev bathroom is such that if a fire occurs, for example, from a shorted electrical wiring or for other reasons, a fire will instantly flare up in the bathroom, like in a stove. Therefore, the wiring in the bathroom should be laid in special mounting metal hoses-sleeves. Don't skimp on safety.

The warmest and most expensive option for repairing a bathroom in Khrushchev

Repairing the walls and furniture of a combined Khrushchev bathroom may seem archaic, but with the skills of skillful handling of wood and varnish, you can create very cozy and practical options.

If you make repairs in the bathroom with your own hands, then the cost of acquiring the material will be quite low, manual work and wood flooring will be very expensive. When using ready-made solutions - modified wood panels, which is unlikely for repairing Khrushchev, the cost may exceed the estimate for laying high-quality tiles.

Wood, even under a layer of varnish, very poorly perceives constant contact with water, this leads to loss of color, the development of mold and warping of the structure. Therefore, in the repair of a combined Khrushchev bathroom, species such as larch, oak, and pine are used. It is undesirable to use birch or beech. You can make an analogue of modified wood yourself by covering the blanks cut out for repair with 5-6 layers of oil varnish with thorough drying of each layer for 2-3 days.

In winter, unexpectedly, our forty-year-old Khrushchev house underwent a major overhaul. But still, as they say, whatever is done is for the better. Looking at how the plumbers changed the old cast-iron Khrushchev risers for polypropylene and PVC, I finally gathered my thoughts and realized that if I didn’t start a major overhaul in the bathroom and toilet now, I would never start it in this house.

Initial data and idea

The bathroom in my Khrushchev is separate. The dimensions of the bathroom in the light are 1520 * 1360 mm, but with certain manipulations they can be increased by 5-6 cm in each dimension, which I will discuss below.

The main idea of ​​the new bathroom was to turn the tub 90 degrees and orient it along the far wall (opposite the front door). In my wife's opinion, this position is more rational, although we understood that we would lose ten centimeters in length.

Preparatory work

I took about two weeks to prepare for the immediate start of work in the bathroom in order to decide on the project of the future bathroom: draw up plumbing and sewage, ventilation, tile laying, etc.

So, what is a bathroom in a typical panel Khrushchev? In fact, this is just a cabin, which was cast somewhere at the DSC and already assembled in its place in Khrushchev during construction. The walls of the cabin have a meager thickness of 3-5 cm and they are made of reinforced gypsum concrete. The material is very weak and easily crumbles with a perforator or even a hammer. In the figure below, the walls of the “cabin” are shaded and, as we can see, they are adjacent to two load-bearing walls of the Khrushchev, in one of which (between the kitchen and the bathroom) there are ventilation shafts.

In repair practice, the most common option is the demolition of the Khrushchev partition between the toilet and the bathroom, which allegedly makes the bathroom more spacious and there is a lot of extra space. However, in my opinion, this is the most common misconception: no matter how much I tried to hypothetically design such a “spacious” combined bathroom in my Khrushchev, nothing came of it.

As I already said, the dimensions of the bathroom in my Khrushchev in the light are 1360 * 1520 mm. On the long side, we had a 150 cm bath, which we decided to replace with 140 cm and put it on the short one. For this, from the existing sizes, I lacked 4 cm, which I decided to get by demolishing the bathroom wall adjacent to the Khrushchev's load-bearing wall with ventilation shafts. This "gypsum board" was smashed with an ordinary mason's hammer in just three to four hours. The hardest thing was to take out almost two full baths of construction debris. The reinforcing mesh is neatly cut with a grinder.

Alas, I can’t demonstrate the old, pre-renovation view of the Khrushchev’s bathroom, but believe me, everything was very sad there.

I warn you that by demolishing the Khrushchev wall, you deprive the ceiling of one point of support. It is composed of the same gypsum concrete and is part of a solid "cabin". It can also be dismantled, but I decided to simply strengthen the bathroom ceiling by supporting it with a 40 * 50 mm beam and 10 * 100 mm dowels - this is quite enough.

Two of the four walls in the Khrushchev bathroom turned out to be crooked, with a blockage of up to 3 cm, so I had to deal with their alignment.

After I repaired the kitchen and corridor in my Khrushchev, I already had some plastering skills, but in the bathroom I decided to use a different method of leveling the walls, which I really liked as a result. Holes are drilled in the wall in several rows, self-tapping screws are screwed in, the heads of which are set according to the level and thus the reference points of a new, even and strictly vertical plane are obtained (in the first picture below, the self-tapping screws sticking out of the wall on the right are visible). We prime the walls and wait 1.5-2 hours. Next, we take slabs of moisture-resistant drywall 1500 * 600 mm, which ideally fit the dimensions of our wall in Khrushchev (1520 mm) and are “glued” to the wall with a special adhesive solution for drywall. Unlike plaster, the adhesive composition hardens faster (up to 20 minutes), so the plates do not slip. The composition is applied with "buns" every 15-20 cm, on which the GKL plate is laid and tapped with a mallet or pressed with a rule so that the plate plane coincides with the plane of the previously set self-tapping screw heads.

The joints between the plates are sealed either with the same composition, or simply with plaster. The time for leveling the wall takes only 20 minutes, that is, exactly as long as the adhesive composition diluted in the bucket hardens.

Try to move 120 kilograms from the spot, and then take it out so as not to bomb half the apartment in Khrushchev (already repaired, by the way). I watched a video on YouTube of how these cast-iron bathtubs are cut with grinders, drilled with drills, even smashed with pound weights! (cast iron is a brittle material and can be chipped/broken). However, my wife's uncle stopped me in time and said that all these baths are easy to endure if everything is done correctly and skillfully.

While the uncle was at the entrance to the house, I managed to loosen the bath in one face, put it on the priest and remove the legs. Thresholds were covered with thick rugs, and on the way of our movement from the apartment soft tourist rugs were laid. In such a vertical position, we carefully carried the bath to the landing of the Khrushchev building and, further up the stairs, carried it outside without any problems. On this day, our apartment lost the last native element - the old Soviet cast-iron bath.

So, now I have nowhere to wash in Khrushchev, so I need to act quickly and efficiently so that the new bath is in place at least in three or four days. The first thing to do is plumbing and sewerage.

Water supply and sewerage

I changed the old cast-iron sewer in Khrushchev a year earlier, now I just had to change the layout of Khrushchev PVC pipes and do one very time-consuming piece of work - chasing the wall for sewerage and water supply in the future place of the sink (in the picture - this is on the right).

Chasing the load-bearing walls of Khrushchev is not a good thing, and it is doubly bad if it is chasing horizontally and not vertically. But on construction forums and a number of sites, there was information that if the depth of chasing does not exceed a third of the thickness of the Khrushchev wall, then this type of work is still possible, or as the builders put it simply, you can chasing to the first reinforcement, no further.

Armed with a powerful hammer drill and a grinder with a diamond blade for concrete, I began this dirty work. Of the means of self-defense, it is imperative to have a respirator, goggles and gloves.

It took me a total of 4 hours to complete. The depth and width of the strobe is such that it is possible to install a sewer pipe with a diameter of 32 mm into it. Be sure to provide a slight slope of the pipe (5 degrees) on a horizontal section to ensure water flow. We remove the sewer pipe from the strobe using angled elbows (at 45 degrees) and put an adapter from a diameter of 32 mm to 50 mm (the main diameter of the sewer). This part of the sewer will already be hidden by the bathroom (blue mark on the wall), so there is no need to deal with further chasing.

We assemble the sewerage following the same rule - the slope towards the riser should be about 5 degrees so that the water does not stagnate in the pipes, but flows normally.

A little trick: in order for PVC pipes to easily join, lubricate them with liquid soap.

This is the wiring left behind by plumbers who changed the riser in the house.

I don't know if it could be done somehow more practical and easier? I think it was possible. Two polypropylene ball valves (32 mm) and a jumper between them are not a basic option. I asked the plumbers to make such a design so that I could install the heated towel rail myself, without involving anyone. Without a jumper, during the installation of a towel, I would have to leave my entire Khrushchev without hot water.

I drew a diagram of the future plumbing and sewerage of the Khrushchev bathroom on a piece of paper. It is necessary, including in order to correctly calculate the number of fittings and pipes needed to be purchased.

With such a scheme, I went to the construction market, once again consulted with the seller and bought everything I needed. From him, from the seller, I took a special soldering iron for polypropylene pipes for a week. I had no experience with such a tool, but I saw how plumbers do it, and YouTube is always at hand. For training, before the main work, I took a couple of extra couplings to indulge in - the soldering process is quick and not complicated at all.

What you need to know when installing a water supply system from polypropylene pipes:

Pipes come in a variety of diameters, but 16 mm (1/2 inch) pipes are most commonly used for water supply, and 32 mm (1 inch) for towel warmer pipes.

Pipes are available separately for hot and cold water supply. Pipes for hot water have internal reinforcement, which is visible on the cut (red).

The sellers may say that the water in our pipes is not so hot, so you don’t have to worry and install the same pipes for cold water supply, but in this case, depending on the temperature, they can and will definitely give deformation (stretch), which can be quite unpleasant. For example, in my case, plumbers who changed risers during the overhaul of Khrushchev managed one type of pipes (for cold water) and when hot water began to circulate in the system, these pipes simply spread and my jumper became crooked (look at the photo of the toilet above).

You can solder pipes in one person, but it is more convenient to do it together: one holds a soldering iron, and the second puts fittings on it, heats it up and joins it. My wife helped me to solder the pipes - it was the best March 8 for her)).

It is better to collect small elements and assemblies separately and then dock them to the main water supply. The picture above shows the nodes that will “go” to the kitchen: outlets for the kitchen faucet and outlet for the washing machine.

The pipes are cut with special scissors, but if they are not there, then this can be easily done with a grinder or a hacksaw, in which case you just need to process the edges of the pipes with sandpaper or the same grinder so that there are no notches and the cut is even.

The soldering iron must be heated to operating temperature. We tightly fit the fittings on both sides of it, which must be connected, count to 8 and then quickly remove the fittings and evenly join. The most important thing in this matter after the docking has taken place is in no case to correct or turn the fittings, even if they are not docked exactly as you would like. Such a loose connection can then leak.

It is also necessary to control that the pipe enters the fitting to a sufficient depth (determined by the inner boundary of the fitting socket).

Such a joint is considered ideal, where the rim / ring of molten polypropylene evenly bends around the pipe. Under no circumstances should you cut it!

Well, in general, and all the main recommendations. I don’t know if it’s right or not, but I soldered my plumbing in Khrushchev from the kitchen to the riser in the toilet, and not vice versa. It took me a whole day to dismantle the old and install a new water supply and sewerage system in Khrushchev. Plastic plugs (red in the photo) are screwed into the outlets for the faucets, so far there is only water in the kitchen. We turn on the water, open the faucet in the kitchen and check the system for leaks. Luckily, no leaks were found.

Another point regarding the piping to the mixers. For a washbasin faucet, the distance between the pipes does not really matter, because the connection will be made with flexible hoses, but the bathroom faucet has a fixed distance between the nozzles - 150 mm. Therefore, the distance between the centers of the fittings that are connected to the mixer must be exactly 150 mm. If you didn’t guess a couple of millimeters, then it’s okay - you can then adjust it with the help of “ducks” (special sleeves on which the mixer nozzles are screwed).

The next stage of work is laying tiles on the floor. I decided to veneer the entire floor of the Khrushchev, including under the future bathroom: the overpayment is insignificant, and the effect is much more pleasant.

I did not do any preliminary leveling of the surface, any self-leveling floors, etc. The rough floor of the Khrushchev in the evening was treated with the Ceresit CT16 coloring primer, and the next day in the morning my wife's uncle arrived - he is our tiler. He laid the floor under the level, and the irregularities were corrected by the thickness of the adhesive solution.

Tile "Keramin". Manhattan Collection (gray). We laid the same tiles two years earlier in the corridor and kitchen of our Khrushchev. We decided that everything in our little Khrushchev should be done in the same style - no Gzhel and gypsyism, which for quite a long time annoyed the facing uncle.

The tile left over from that repair lay in place under the bath, as you can see, it differs in tone from the new tile purchased.

After the glue had dried the next day, I hollowed out a niche in the gypsum concrete wall, which will be located above the bath and is intended for shampoos and other small bottles. Alabaster grabbed the water pipes in the gate and then plastered everything. Didn't do this before tiling because I had to adjust to the schedule of the tiler.

Bathtub installation and bathtub screen fabrication

While waiting for couriers with a new bathroom, I started leveling the second curved Khrushchev wall (wall with a door). The same slabs of moisture-resistant drywall were used, the joints between which were smeared with plaster. The corners that are visible in the frame were intended for attaching shelves to them for the entire width of the wall (for basins, etc.). In the course of the work, the tiler suggested a slightly different way of manufacturing and fastening such a shelf (I will describe it later).

I also brought out a socket with several degrees of protection (a special socket for bathrooms) and soldered pipes for a heated towel rail. Later, it will remain to screw the corner brass “Americans” into them and hang a “towel” on them.

Finally, the new bath has arrived. Be sure to arrange an inspection of the product together with couriers on the street, after which they bring it into the apartment and put it on the priest in the bathroom.

Here it is necessary to start a conversation about the eternal: what kind of bath should be - acrylic, steel or cast iron? You can argue and argue endlessly, but I will not do this, because this is the topic of a separate article. Personally, I liked the German steel bathtub Kaldewei Saniform Plus 140 * 70. Is steel noisy? Poor temperature control? Calm down dear, all this is not about her. There are steel bathtubs on sale with a wall thickness of 2 and even 1.3 mm, and this one has a record 3.5 mm. literally after a month or two of operation ... Kaldewei Saniform Plus turned out to be the only bathroom about which there was not a single negative review, but on the contrary, the owners were satisfied with everything. So I bought it and did not regret it.

I made the installation of a 40-kilogram bath in one person, without assistants, which could not be done with a cast-iron product. I installed a siphon / semi-automatic device on it, put the legs,

and then carefully placed it on the floor. Two levels lay on the sides of the bath (long and short), on which, with the help of adjustable legs, I installed the product strictly horizontally. No bullying towards the drain!!! Absolutely all bathtubs have a bottom slope, which provides a normal flow of water. To eliminate the slightest staggering, the bath must be wedged: wooden wedges are hammered between the wall and the side.

A noise test showed that the noise of falling water in this bath differs little from what was in the old cast iron one. If you continue to be skeptical about this business, then buy a couple of sheets of car soundproofing and glue them to the bottom and sides of the tub.

Now that the bath is wedged and does not stagger, you can start making the screen. To start with the general points:

If you want to make a really good repair, then refuse any purchased screens under the bath.

The screen under the bathroom should be tiled - this is both beautiful and hygienic.

Forget about the last century and in no case do not make these miserable niches for the legs. Previously, when they washed in basins or in the bathroom, they may have been needed by the housewives, but today we live in the age of washing machines, so what the hell are these useless niches.

The screen should provide emergency access to the pipes, so a small part (near the siphon) should either be left open or laid with a piece of tile, which, if necessary, can be easily removed. It is not at all necessary to install inspection hatches made of steel or plastic.

And yet, make the screen strictly vertical, do not experiment with any inclined surfaces. They can easily spoil the geometry of the room.

Well, now let's start making a screen for a bath with our own hands. For the screen frame, we need steel profiles 27 * 27 mm for drywall. According to YouTube videos, I made a preliminary markup under the bathtub (at the bottom left of the frame you can see pencil marks and a long line for the entire length of the bathtub). In general, markup is done like this:

From the side of the bathtub on the wall, we draw a vertical line along the level to the floor - this is the first notch on the floor.

From the first notch, we retreat deep into the distance equal to the width of the bent edge of the bathtub rim and put the second notch.

From the second notch, we retreat a distance equal to the thickness of the tile and the adhesive layer (third notch) and, finally, we retreat another 12 mm (gypsum board thickness) and get the fourth notch.

The fourth notch will be the edge of our steel frame for the bathtub. With the help of a level and a ruler, we retreat the resulting distance on the other side of the bath. We draw a straight line between the serifs. On it we will fix the profile.

The steel profile is cut with a grinder, to stiffen the structure, two profiles are folded and twisted with self-tapping screws. To save myself from the unnecessary drilling of holes in the Khrushchev floor, I glued the lower profile with silicone sealant. The most important thing in this matter is to first reliably degrease the surfaces to be glued with white spirit or acetone. Then we apply silicone sealant and strongly press the profile to the floor. In about an hour and a half, it will almost not be torn off the spot. The upper profile is glued to the side of the bath in the same way. Bars can be inserted into the gaps between the bathtub and the profile, again to stiffen.

The vertical ribs near the wall already need to be planted on dowels (you can’t do without drilling here), and the middle vertical ones - on self-tapping screws.

Before sewing up the space with a sheet of drywall, we put a ground wire on the bath (attached to the black ear on the left in the top photo).

Finally, a sheet of drywall takes its place with a cutout for access to the siphon under the bath. The dimensions of the cutout are 260x400 mm. Drywall is attached with screws to the profile. So, the manufacture of the screen for the bath in my Khrushchev is completed.

Room cladding

Again, in the evening, I primed all the walls and the screen under the bathroom with Ceresit CT19 primer-paint. When working with it, I strongly recommend that you thoroughly cover the bathtub with an old bedspread or sheet and immediately wipe off the primer if it gets on enamel or tile - it will be too difficult to remove it later, after drying.

At the stage of preparatory work, I made a layout of tiles from the collections of Keramin "Manhattan" and the Italian Alta Ceramica (collection "La Petra di Volta". The apron in the kitchen is lined with Italian tiles and we are delighted with it.

The bathroom lining took two and a half working days. The most difficult job was in the diagonal laying of Italian tiles, but our tiler successfully completed the task.

The niche was eventually made not dark, as in the layout diagram, but light. The frame already shows the new Wassercraft faucet with a short spout, located not at the end of the bath, as usual, but on the side, so that it is convenient to regulate the flow of water without getting out of the bath.

And here is the shelf above the front door, already lined. It is made of two sheets of thin drywall (6mm) screwed to a wooden frame (boards 100x18 mm) with self-tapping screws. Basins and containers with clean towels are now stored on this shelf.

The wiring for the fan and hanging cabinet was pre-wired.

Well, this is how it happened. Upon completion of the work, even the wife's skeptical uncle melted - he really liked the result of our idea and his work. To the right, under the bathroom, there is a place for access to communications.

Installation of hanging cabinets and more

After all the seams were jointed, it was time to install the rest of the Khrushchev bathroom furniture. I liked the mirror cabinet from the Russian manufacturer Aquaton. All the small rubbish (deodorants, shaving products, wife's cosmetics) calmly fit into it, and there is even a place left. Visually, the locker practically does not eat up the space in the Khrushchev’s bathroom; because of the mirror, you can’t even immediately understand that this is a locker at all.

I bought a fan from the Spanish manufacturer Cataco - always with a cord. That is, the fan power is combined with the Khrushchev bathroom light switch, but it is always possible to turn off the device with this same cord.

The inspection hole was closed not with a poor hatch, but with a piece of tile, to which the reciprocal strips of furniture magnets were glued. The seam between the tiles was sealed with sealant in the color of the fugue. It turned out to be a seemingly monolithic screen under the bathroom, but in which case the sealant will simply be cut off, and the tile will be removed with a suction cup - access to communications is open.

Heated towel rail hung one of the last. In order not to damage the brass "American" when tightening the thread, I recommend holding some thick rag between the key and the nut. Well, yes, the threads are packed either with tow and unipack, or with a thick Teflon thread. For greater reliability, I recommend that you also buy a few gaskets for an inch pipe (I forgot what material they are made of, but they are not pressed through like rubber).

I put water on the towel - everything is sealed. Again, lucky.

For a long time we could not decide on a hanging cabinet and a washbasin for the bathroom, but at the very last moment we found a wonderful product from AM&PM Like 80 cm. -for this unfortunate centime, you have to take the cabinet already. But as it turned out, 80 cm is the width of the washbasin, and it protrudes beyond the dimensions of the cabinet by 1 cm in each direction, so the width of the cabinet is 78 cm, which naturally suits us. Tyutelka in tyutelka, you can say))

The choice in favor of a hanging pedestal was because visually it is not as bulky as a floor pedestal. Plus, again, there is always access to the siphon under the bathroom (remember the revision hole). The picture also shows a socket with a protective screen.

Wassercraft faucet from the same series as on the bathroom - cute, angular as we like)) The sink has a bottom valve with a click-clack system (pressed - you can draw water into the sink, pressed again - flushed).

This is the room we got at the finish line of the main work.

To make such a restroom comfortable and beautiful, it is important to choose the right finish for the walls, floor and ceiling, as well as rationally arrange the plumbing.

Actually, the repair itself in the houses of the old Soviet construction is also carried out according to certain rules. Read below how to decorate a small Khrushchev bathroom, as well as how its design should be.

Bathroom finishing

You can decorate a compact Khrushchev bathroom with absolutely any moisture-resistant materials. Usually the walls are tiled or sheathed with PVC panels. Sometimes green drywall or mosaics are also used.

Tiling

Important: To make the surfaces even, plastering is carried out according to beacons.

Repair of a bathroom in Khrushchev. Photo of the wall alignment procedure

The tile is glued with preliminary marking. First, the walls are finished, then the ceiling and at the final stage the floor. The adhesive is applied with a notched trowel.

Advice: It is better to lay tiles on the floor diagonally or at an angle of 30 degrees. This will visually expand the room.

It is better to lay tiles on the floor of a small bathroom diagonally

Grouting is done with a matching color paste.

Finishing with plastic panels

The advantage of this material is that the alignment procedure before its installation is not necessary. This reduces repair time and reduces its cost.

Plastic panels are a great option for covering uneven surfaces in a Khrushchev bathroom

Repair of a combined bathroom in Khrushchev using PVC panels is done as follows:

• A frame made of wooden slats 40x20 mm is attached to the walls.

Attach PVC panels to usually wooden frame

• The ceiling plinth and corner elements are installed.
• The floor plinth is installed.
• To fix the panels, clamps or clips are used.

How to install plastic panels on clips

The same technology is used to repair a shared bathroom in Khrushchev.

Advice: The frame can be assembled not from rails, but from a special PVC profile. The risk of deformation of the crate as a result of exposure to moisture during its use will be reduced to zero.

Other materials

Mosaic is mounted in much the same way as tiles. Sticking is made on the leveled surface. GCR is sewn onto the frame. Plastering is done with a spatula in several layers.

The plaster is applied to drywall with a spatula in thin layers.

Arrangement of plumbing

The size of the bathroom in Khrushchev does not allow a particular turn around in terms of the placement of plumbing fixtures. Arrange them compactly, taking into account the standards of SNiP.

The minimum free space in front of the sink and bath is 70 cm, in front of the toilet bowl - 60 cm. The functional area next to the washing machine is 90 cm. The distance between the plumbing fixtures themselves is at least 25 cm.

Ways to install plumbing in a Khrushchev bathroom

If the door to the Khrushchev bathroom is located on a short wall, it is customary to install a bathtub or shower stall opposite it. If the entrance is arranged on a long one - a toilet bowl / sink group. The washing machine is usually placed in this case against the wall adjacent to the door.

Bathroom (design photo in Khrushchev). Opposite the door to the toilet, a sink and toilet are installed

Important: Moving the toilet from the riser is highly discouraged. Even a slight lengthening of the drain pipe will lead to frequent blockages.

The most suitable toilet option for a small Khrushchev bathroom is hanging. Bathtubs and showers are often installed in corners. The towel holder can be hung next to the sink.

Towel holder can be nailed next to the sink

The layout of the bathroom in Khrushchev, separate from the bathroom, is such that usually nothing can be put inside except for the toilet. However, if the width of the toilet is more than a meter, you can try to hang the sink on the wall.

In the Khrushchev toilet, you can try to place a small sink

What should be the design

The design of a combined bathroom in Khrushchev, as well as a separate one, is selected taking into account some recommendations. The main thing when choosing a design is to try to make the room as harmonious as possible.

The color scheme for finishing small bathrooms is usually light.

Idea: To keep the restroom from looking faded, you can use brighter colors. For example, orange, pink or blue. Often the bathrooms of Khrushchevs are also decorated with tiles of several different colors.

Photo design of a bathroom in Khrushchev. If desired, a small restroom can be decorated and brighter

It would be a good idea to decorate the interior of the combined bathroom in Khrushchev with a large number of mirrors. This will also increase the volume of the room. The lighting is bright.

The use of mirrors allows you to significantly increase the area of ​​\u200b\u200bthe small Khrushchev bathroom visually.

Idea: To diversify the interior of a small restroom, you can use plumbing of an unusual shape or color. Bathrooms with mosaic or tiled panels on the walls also look very interesting.

You can decorate the Khrushchev bathroom in an original way by installing unusual plumbing or decorating the walls with panels

The most suitable design options for Khrushchev bathrooms are minimalism and hi-tech. If desired, you can arrange a compact toilet in Provence or retro style.

Decoration in the style of minimalism

The characteristic features of this direction are discreet colors (beige, brown, gray) and a minimum of decorative elements. For wall decoration, plain tiles of no more than two different shades are suitable. Light fixtures of a modest design will look very good.

Divided restroom Khrushchev in the style of minimalism

Hi-tech style

When decorating such a restroom, a lot of mirrors, glass and chrome elements are used. The color scheme is usually not too catchy. Mostly grayscale. A great example of high-tech style restroom design:

Combined bathroom in Khrushchev. High-tech bathroom photo

Destination Provence

Shades in the "French" dressing room are used light, pastel. Walls are best finished with plain tiles, complemented by a border with a delicate pattern. Often mirrors and elegant lamps are hung in such bathrooms.

Idea: Put on a shelf under the sink or decorate plumbing "for porcelain". Hang curtains in a box or flower on the window.

Light colors, textiles and elegant decor are the characteristic features of the Provence style.

Retro style

The colors of such a restroom are usually dominated by brown, dark gray and white. In this case, the method of contrasts is widely used. For example, you can combine a brown wood-look hanging set with white walls, floors and ceilings. An example of a neat retro-style restroom:

Effective little bathroom. Photo of a combined restroom in Khrushchev in retro style

This method, by the way, is a good answer to the question of how to divide a combined restroom into zones.

Idea: If the set does not fit in the bathroom, you can simply harmoniously combine brown and white in the decoration.

Original retro bathroom decor in brown tones

When arranging a bathroom in Khrushchev, you should pay maximum attention to the selection of finishes, arrange the plumbing correctly and try to make the design in the same style. The result is a very beautiful and functional restroom.

Any repair in Khrushchev apartments (and the bathroom is no exception) is a very responsible matter that will require rational thinking in addition to taste. Usually, bathrooms in apartments of this type have an area of ​​​​no more than 5 square meters, and even not a very convenient layout.

All this greatly complicates the repair of the bathroom with their own hands to a non-professional.

The small area of ​​the bathroom also complicates the process of selecting and arranging plumbing and furniture. About the same, to install a washing machine is often not discussed at all.

However, not everything is so sad, and even in a small bathroom you can create a cozy interior if you try hard.

Photo of a bathroom design project in Khrushchev: green floor, white walls

The complex design of a beautiful bathroom in a small Khrushchev

Choosing a style for renovation

Thinking about the design of the bathroom in Khrushchev, do not forget about the design of the entire apartment. For example, a high-tech bathroom will look alien in an apartment with a classic interior, despite the fact that it will be very comfortable and beautiful in itself. Here it would be more appropriate to use elements of classical design and natural materials - a wooden cabinet or shelf, gilded sconces near the mirror, marble panels.

The sewer riser can be designed as a marble column, and the washbasin can be replaced with a ceramic or porcelain bowl, standing on a countertop made of artificial or natural stone. However, do not forget that classic design is primarily luxury and elegance, so a small room should not be overloaded with decorative elements. For examples of styles in design, you need to refer to the photos on our website and on the Internet in order to choose the direction you like.

Photo of a bathroom with a washing machine under the sink and tub

Country style for non-professionals is the most successful, as it involves extraordinary simplicity and closeness to nature. Pebbles, driftwood, natural fabrics and rough crafts can replace most of the finishing materials and decor elements.

The design of the bathtub is also better to choose in accordance with the chosen style - free-standing on figured legs will decorate both a classic bathroom and a country style one. If it is standard, you can simply add some characteristic detail, for example, the standard front panel can be replaced with a roughly painted wood or even a canvas or linen curtain.

Photo of a small toilet in Khrushchev decorated with light brown tiles

A bathroom in Khrushchev in the style of minimalism, at first glance, seems to be the simplest and easiest to perform during repairs. Indeed, nothing superfluous is allowed here, and all constructions have their own functional purpose. But suffice it to recall that the origins of minimalism is the Japanese style, which has been developing its own rules for thousands of years.

Impeccable lines of surfaces and many other nuances create an elusive play of this style, and any mistake turns such an interior into an empty and uninteresting one. Little details create this simple style. However, a competent minimalist bathroom project is the best suited for Khrushchev apartments - the interior space of such rooms is visually expanding, and its functionality surpasses any other interior options.

Before choosing new plumbing and bathroom furniture in Khrushchev, it is necessary to determine the minimum that really should be in the bathroom. Indeed, many, if they have a bath, are ready to abandon the washbasin in order to put a washing machine there, or, on the contrary, they change it to a compact shower. In any case, with a shortage of space, you should not put bulky cabinets for storing things in the bathroom or try to equip it with all known plumbing at once, right up to the bidet.

Photo of a bathroom - a toilet bowl and a water heater and design. In red and white shades

Even the most modest size and area of ​​the bathroom in Khrushchev allow you to place a minimum set of items in it - a washbasin, a toilet bowl, a small cabinet for storing detergents, and a place for bathing. The shower stall in Khrushchev is generally very popular.

Angled and asymmetrical plumbing fixtures and furniture are the best way to organize a tiny bathroom space. For example, an asymmetric hot tub with a volume of 300 liters fits perfectly in a small bathroom in Khrushchev, because its length is only 150 cm, and its width is 51 cm and 96 cm. It is important to plan such moments in advance during repairs.

Minimalism at its finest. Photo of real repair

Above the washing machine, toilet and door, you can use the vertical space of the walls. Hanging cabinets and shelves should not be very deep (up to 25-30 cm), otherwise they will visually clutter up the bathroom space. The same rule applies to the cabinet for the washbasin, and it is better to refuse shelves over a small sink altogether, since bending over the sink for shaving or washing in this case will be very inconvenient.

Color solution

Many bathroom design projects are done in pastel light colors that visually expand the space and make it airy and weightless.

Combined bathroom in bright colors

At the same time, white color can be the main or additional color both in finishing materials during repairs, and in furniture or plumbing. Light pistachio and lemon color patterns on the wall or furniture facades give the bathroom an extraordinary freshness. A delicate cream or peach shade creates a special coziness, while the traditional blue makes the room cool.

Often bathroom renovation involves the installation of an acrylic insert, while the color of the new border must be matched to the color of the enamel or acrylic material. It is generally better to abandon horizontal borders and patterns in a small bathroom in favor of vertical stripes or patterns. The use of two or three colors in harmony with each other is quite enough to create coziness in a small bathroom in Khrushchev.

Photo of a dazzling white bathroom

Source: interiorgid.ru

In order for the repair of a combined bathroom in Khrushchev to give concrete results, often a complete redevelopment of the premises is required, which, of course, is quite expensive and troublesome.

1. Area: when we hear the concept of "Khrushchev" the first association that comes to mind is a minimum of space. Of course, the option of a combined bathroom and bathroom is much more pleasant, but such happiness does not happen in every Khrushchev building.
2. Communications: bathroom renovation in Khrushchev today requires a global redevelopment, because only in this case it is possible to achieve expansion and increase in space. However, such a plan is most often interfered with by laid communications, because plumbing is tied to specific places, which is not always beneficial for changing a room. In addition, during the renovation in the bathroom, there may be an unplanned need to replace communications or wiring, which is quite expensive.
3. Uneven surfaces: one of the main problems of Khrushchev's houses is the rather rough and uneven walls. As a rule, during the repair of a Khrushchev bathroom, you have to level both the walls and the floor, which is quite expensive and takes a lot of time. It should also be noted that when leveling, mortar and putty are used, which occupy a considerable layer, and the reduction in space affects the bathroom area in a bad way.

Such difficulties are encountered on the path of any repair, and even more so in the bathroom of the Khrushchev house. However, any troubles can be solved, most importantly, it’s good to think everything through in advance.

Planning

Repairing a bathroom in Khrushchev, like repairing a bathroom, requires a detailed plan, because otherwise any little thing can ruin and complicate your actions. A preliminary plan will help to properly organize the space, increase the usable area, put all the little things in their places.

Such a project involves arranging furniture, plumbing, electrical appliances and even such trifles as a laundry basket and cup holders for toothbrushes.

Consider the options for finishing and its shades, because then it will be difficult to change anything.
The plan will help to organize the already scarce bathroom space in a functional and attractive way.

Related video: Bathroom renovation in 'Khrushchev'

Description: Anatoly Aristov, general director of the company Favorite Apartment and Favorite Turnkey Bath, talks about the renovation of the bathroom in Khrushchev, and the owners share their impressions of the Favorite Turnkey Bath.

Related video:

Description: Bathroom design in Khrushchev. TOP 15 bathroom design options.

In this slideshow, I have chosen the best options for how a renovation should look like in a small bathroom, which contains both a bathroom and a bathroom.

Often we are faced with such a situation that at the time when we are thinking about how to change the situation in the bathroom, nothing comes to mind due to limited maneuverability.

Photo of a water heater in the interior of a bathroom

Despite the general opinion of designers from every corner of the world, today even a child knows that a full bath takes up a lot of space. A reasonable solution would be to replace the bath with a shower or at least a corner bowl. If we exclude cardinal options with redevelopment, combining with a bathroom and removing the wall, such a replacement would be the most painless choice.

Advantages of a shower cabin:

1. the amount of water consumed is reduced by 5-6 times,
2. free space will be much larger,
3. a place for a washing machine or a laundry basket is formed.

It is worth noting that replacing plumbing is quite simple with your own hands. A new shower stall is a little pricey, but it will pay off once you see your bathroom as spacious and comfortable.

• Repair of a bathroom in Khrushchev will be functional and reasonable in case of replacing the USSR plumbing with modern design options. Consider the idea of ​​a wall-hung toilet: when the cistern is hidden in the wall and the floor under the structure is free, the room seems spacious enough. The installation is quite durable and can withstand weight up to 200 kg.
• Bathroom renovation in Khrushchev will also affect the sink. The cardinal method involves the complete removal of the sink, and the use of a faucet above the bathtub as a washbasin. Not everyone likes this option, so it’s better to get by with a modern hanging model. The free floor is the best effect on the spacious room.
• Communications must be hidden, for which use a drywall box. Not a single toilet repair in Khrushchev is complete without this solution. In any room of the Khrushchev house, it is advantageous to use such an idea as additional shelves for bathroom accessories.
• Of course, the bathroom in Khrushchev is unlikely to also accommodate a washing machine, but huddling in the kitchen is not the best idea. The device can be installed under a wall-hung washbasin, next to a new shower cabin, near a triangular bathtub with a narrow angle, or even make a special niche in the room. However, please note that the location of the washing machine must be considered in advance.

Having followed these tips in a complex, a new bathroom will not be recognized. The advantage of such solutions is that any replacement and redevelopment can be done by hand, and this will not hurt the family budget.

The big question is, how much does the repair cost? The modern market offers a lot of goods of various prices, both domestic and imported. It is very important not to chase the cheapness of goods, because bathroom renovation is not done for a year or two. Remember, no matter how much new plumbing costs, its service life should reach 10 years.

If you still decide to demolish the wall and radically change the premises, be patient and resourceful, because you will have to face the BTI service (you cannot make changes to the apartment plan without their permission) and a lot of related problems.

In favorable scenarios, do-it-yourself repairs will be a pleasure, not to mention the results.

Blue bathroom design

Choice of shades

As we have mentioned more than once, the primary problem of the rooms in the Khrushchev house is the minimum area. This issue is most effectively solved in two ways: the replacement of plumbing, which we indicated above, and the choice of light finishes.

Let's talk in more detail about the choice of lining and its shade:

The traditional choice of every second housewife is ceramic tiles. Repairing a toilet in Khrushchev, as well as in a bathroom, requires high-quality moisture-resistant and durable materials, such as tiles. Its plus is that you can do the styling yourself, it is resistant to ultraviolet radiation, extreme temperatures and high humidity.

Only tiles can protect the room from dampness and fungus, and, most importantly, it costs quite reasonably. The choice of decorative material is huge, so there is no need to worry about how much it will cost.

Design project of a small bathroom in Khrushchev in pink and white colors

• the room only needs to be enlarged, with which only light shades have successfully coped for many years,
• couples like yellow and orange, white and sandy green and turquoise, pink and purple look favorably,
• tones should be soft and not irritating to the psyche,
• saturated colors like red, black, blue, brown are best used as an addition to the main white, beige, olive and light gray,
• to emphasize certain areas of the room, use mosaic tiles of the appropriate shade,
• floor tiles should be slightly darker than wall tiles (example: white wall and gray floor),
• the pattern or pattern should be minimal, better just a few tiles, a bathroom that ripples with polka dots or a flower is not the best choice for a modern do-it-yourself renovation.

In no case do not choose large slabs - they will divide the meager room in Khrushchev into even smaller zones. A medium-sized rectangular tile looks organic.

It is better to lay the material on the walls horizontally, so the bathroom will visually stretch in breadth. And diagonal masonry is perfect for the floor.

Find out how much tiles cost from various manufacturers, both domestic and imported. Do not trust single points on the market without a certificate and a warranty period.

Buy materials with a margin and in one store.

Source: www.vannalife.ru

Related video: Bathroom design (Khrushchev)

How to place a bath and a bathroom in a combined bathroom in Khrushchev

Problems of Khrushchev's bathrooms

As already clear, the main disadvantage of combined bathrooms in Khrushchev is their small size, as a rule, their area does not exceed four square meters. It should also be noted here that at the time when the Khrushchev houses were designed, due attention was not paid to the placement of household appliances, which means that in order to fit a washing machine on four square meters, you will most likely have to resort to redevelopment of the premises.

Redevelopment, as you know, is not an easy task in itself, and before starting it, you should carefully consider where and how to place plumbing. In addition, not all ideas with redevelopment can succeed: difficulties arise with a sewer riser, which cannot be moved, and therefore, plumbing will need to be installed not where you want, but where the riser will allow.

And finally, you need to pay attention to the interior and decor of the bathroom in order to visually expand the space, and the walls of the room do not psychologically put pressure on the person in the bathroom.

Related video: Bathroom renovation photo in Khrushchev

Description: In the recent past, the bathroom was given the undeservedly cramped place in the room, and no attention was paid to its design at all.
The traditional color combination was considered to be a range of dark and light tones of ceramic tiles. Such an interior is not at all pleasing to the eye, and is unlikely to cheer you up.

Today, everything has changed, new trends in design art will help create a room full of comfort and style, and boundless imagination will turn your bathroom into a real paradise.

The modern world provides a rich variety of various products for the correct, harmonious and beautiful design of the bathroom.
Also, a wide range of various accessories allows you to give each bathroom, the design of which is taken even from a regular renovation magazine, a unique look for every taste.

With the right approach, any bathroom, regardless of its size, can shine with colors of individuality. The most important thing is beauty and comfort.

Photo of a bathroom in Khrushchev: toilet, sink, bathroom

The walls and ceiling must be light, if ceramic tiles are used for wall cladding, then it is better to avoid large bright patterns. A tile with a discreet or no pattern is much more suitable for a small bathroom.

The same applies to the texture - a smooth glossy surface will visually expand the space, but if textured coatings are preferred, then this should not be a pronounced and medium-sized texture.

We combine the toilet, washing machine sink and water heater

As for the ceiling: it can be whitewashed, finished with a light smooth panel, and even better to mount a stretch ceiling with a glossy surface.

And if we are already talking about mirror surfaces, then the mirrors themselves cannot be neglected either - due to the reflection of the wall, the bathroom in Khrushchev visually expands significantly.

We develop the interior - the best photos and ideas that work

When designing an interior, you first need to decide directly on the decoration of the walls, ceiling and floor. As mentioned earlier, the colors should be light, so the walls and ceiling can be made in the same color scheme: creamy muted tones, with the ceiling lighter than the walls and the floor darker to create a kind of gradient from light to dark, which visually makes the room appear higher. .

You can make glossy not only the walls and ceiling, but also the floor, the only drawback of such coatings is their soiliness, so it is better to immediately remove drops of water from the walls and floor. Acrylic bathroom liner will save you money, time and nerves. This is one of the fastest and easiest ways to refurbish your bathroom.

If you started a bathroom renovation and are limited in funds, an inexpensive way to finish is described here.

Bathrooms with light-colored tiles can give the impression of a cold operating room, so it makes sense to add a few color accents to the interior. For a long time, the accent was the horizontal division into the upper light and dark lower parts - such a classic technique is good for large rooms, and vertical lines are more suitable for bathrooms in Khrushchev.

Therefore, for decoration, you can lay out a narrow strip of darker tiles from floor to ceiling - additional lines will visually raise the ceiling.

It is worth stopping at the choice of ceramic tiles: for small bathrooms, it is better to choose medium-sized tiles - large square or rectangular details can focus on the fact that the area of ​​\u200b\u200bthe room is small.

Photo of a small bathroom in Khrushchev. Combine washing machine and sink

The same rules apply to mosaics of small squares that are so popular now - the colorful design of the walls will narrow the room even more, so it is better to leave the mosaic exclusively for decoration, and with a calm monophonic color combination. As for plumbing, with today's variety, you can place everything you need in small spaces.

The most cumbersome piece of furniture in the bathroom, of course, is the bathtub itself - now manufacturers offer not only long bathtubs, but also non-standard ones with a reduced length, using which you can easily free up space for a washing machine.

Photo of the bathroom "rainbow"

With a small size of the room, sitz baths combined with shower cabins are practical - they take up a little more space than a regular shower room, but functionally it is much superior to them.

For the tiniest bathrooms, separate showers are perfect, and if you choose glass doors or shower screens, the space will be perceived as a whole with the entire bathroom.

Significantly save space in the room will help corner baths, which, among other things, are also functional - their design provides shelves for storing care products. There should be no difficulty in choosing a bathroom sink - now on the market there are extremely compact sinks with dimensions of no more than 55 × 40 centimeters.

Photo of the bathroom where they could fit the washing machine.

You can experiment with the placement of the sink, such as placing it overlapping the bathtub so that the rim of the sink partially overlaps the rim of the bathtub. For very small rooms, manufacturers have provided corner sinks that will not take up a single centimeter of usable area.

Models of toilet bowls are also very diverse now, for small rooms, toilet bowls with installations inscribed in a corner have long been successfully used - due to the hidden drain tank, the room looks modern, and at the same time additional space appears.

An effective technique for small bathrooms in Khrushchev will be the use of sinks and toilets attached to the wall and not touching the floor. Due to its "floating" in the air, such plumbing is not perceived as bulky, and the room retains space.

The use of such “floating” sinks to place a low washing machine under it is especially justified - now manufacturers of household appliances offer automatic machines with a height of no more than 70 centimeters, this design saves space very seriously.

Photo of the bathroom - strictly, concisely, beautifully.

With a competent approach, even small bathrooms in Khrushchev can accommodate all the necessary household appliances and plumbing, while the room will seem spacious.

To do this, just listen to our advice: choose the right tiles for walls and floors, combine plumbing and choose the right washing machine - and even such a problematic room as a combined bathroom in Khrushchev will become cozy, comfortable and functional.

And again we combine the washing machine and the sink to save space

Source: www.flaterra.ru

Bathroom design ideas in Khrushchev

Khrushchev is not a sentence

With the advent of modern plumbing, the situation began to change, now even in such a small area that Khrushchev allotted for a bathroom, there is an opportunity to change its design for the better, make it more convenient and functional. When using compact modern plumbing, the bathroom expands not only visually, but also accommodates such devices that you could not even dream of before.

First of all, the design of the bathroom noticeably changes for the better when replacing a standard bathtub with its modern version, preferably a corner one. Such a replacement will immediately free up space that is quite sufficient for installing a washing machine, because Khrushchev has such a small kitchen that it is difficult to install a washing machine in it.

Competently "hide" the washing machine

Modern plumbing manufacturers offer interesting solutions, thanks to which the small area that a bathroom in Khrushchev has is used most optimally. There are two original models of washing machines on sale, each of which changes the design of the room in an original way, and a small bathroom gets more space.

Photo of the bathroom. Small but beautiful. Pink and beige colors

One of the models involves its installation under the sink, which is sold complete with a washing machine, thanks to which the bathroom receives an improved interior design. The second model surprises buyers who saw it only in the photo. What to say about those who were able to see it in action!

The washing machine is called flop. Its installation saves not only a small bathroom area, but also water. It is installed above the toilet, combined with the flush function in it. This real miracle of technology has such an original design that only its presence in the bathroom gives the room a unique design.

Or maybe ... remove everything?

A revolutionary solution used in bathroom refurbishment is the installation of a drain in the floor and the complete elimination of a bath or shower. Only the shower device itself is installed, and an impact-resistant glass partition is installed to protect the bathroom walls from splashes. Glass can be frosted, which will give some intimacy to taking a shower, and for convenience and visual expansion of space, they are made sliding.

The photos of such a room arrangement presented in magazines amaze with the spaciousness that the bathroom has after reconstruction. Many simply do not understand how Khrushchev gets such space.

Everything is done simply - the pipes are hidden in the wall, and if it is impossible to hide them in the plane of the wall, they are closed with boxes ennobled with tiles. At the same time, the upper planes of such boxes serve as shelves for toiletries.

The toilet is placed either in a corner, which significantly saves space, or does not require a tank and is attached directly to the wall. The walls are made in light colors, and the floor is covered with tiles, the color of which is identical to the color of the walls.

The sink for washing is combined with a washing machine, or a glass one is installed, completely invisible against the general background. The interior is complemented by a large mirror, which gives a unique visual effect, and wall cabinets, merging with the walls with their color.

This design, complemented by shiny heated towel rails, and bright spots in the form of towels and other accessories, will make the standard bathroom that Khrushchev once had a room that is a pleasure to visit.