Homemade shelves for the phone. How to make a DIY phone shelf

Before, when the world of technology was not so developed, people used home phones. And in almost every house there was a certain place where he was. Usually a convenient regular phone shelf served as a place. It provided space for a phone book and a pen.

Today, when cell phones are in trend, home phones have faded into the background. But they still need a certain place in the house. More often the device is installed in the hallway room. But many, for convenience, transfer it to the living room and put it by the sofa.

Varieties of shelves for home phone

If there is a closet in the hallway, then a shelf for a home telephone may already be allocated in it. And in the living room, a coffee table can serve as a phone stand. But it happens that there is no specific place for the phone, in this case you need to purchase or make a special shelf for your home telephone with your own hands.

So, the shelves are:

• Shelf for home phone made of laminated chipboard and chipboard. Complex form - with a box. This design is convenient because it has a built-in box for the necessary, small things. On the side there is a special compartment for a telephone pad, and at the bottom there is a shelf for something you need - the same cell phone.

Double wall shelf for phone made of chipboard. Such a stand for a telephone set was common in Soviet times. It does not have any drawers, complex elements. Just a base with a compartment at the bottom for a phone book. It has a convenient size, which allows you to fit on the device of any model.

• Wooden stand - a shelf for a landline telephone with a carved ornament. This can be ordered from a professional woodworker. It costs a little more than a regular shelf, but is made to order. The quality and beauty of this design justifies itself. It will serve you for a very long time.

• Glass base for a phone on wooden corners with a beautiful ornament. Unusual exclusive option. Such corners can be ordered in the workshop, and a piece of glass of the right size can be found by yourself. And from these materials with your own hands to create a wall stand for a telephone set.

Home telephone base made of metal with forged ornament. This model of the base will look beautiful on the wall. You can hang clothes on the bottom hooks. And the top serves as a shelf for the device. You can order one from a metal master. Such a design will be made longer than the standard one, but then it will please the eye for a long time.

This design is a bit tricky to implement. But you can do just that with your own hands. The main thing is to make the right calculations and have the necessary tools. At the top there will be a base for a telephone home apparatus. Below the wall is a vertical compartment for the telephone directory, and next door is just a compartment for keys. More often, it is in the corner that it is possible to allocate space for the phone, in which case the shelf of this option will be just right.

This option is ideal if the apartment has a suitable free space for it. It is convenient in that in case of an urgent call to you, you can take it, and if the conversation is going to be long, then calmly sit down to talk. The drawer can be used to store small essentials. And a shelf above it for storing a telephone notebook. On the shelf under the seat you can store shoes, slippers. There is a wide variety of such models.

What can you make a shelf for a home phone

Lots of shelf options. You can buy a finished shelf in a furniture store, and an individual one - as you like, do it yourself or order from a craftsman. Just a custom one will cost more.

Material used for making:

• From old unnecessary furniture, from unnecessary boards.
• From plastic.
• Made of metal with forged elements.
• From a tree.
• From chipboard, chipboard.
• Completely made of glass and metal, or glass and wood.

The main thing is to have desire and imagination if you decide to do everything with your own hands. If you do not know where to start, then contact a professional, or consult with friends.

Do-it-yourself shelf for a city phone

To make the shelf of the simplest option for a telephone, we need:

• A small sheet of chipboard or chipboard.
• Metal corner.
• Jigsaw.
• PVC - edge.
• Glue.
• Drill, self-tapping screws.
• Screwdriver or screwdriver.

This design is convenient to install in an unsightly place that will not be very conspicuous.

Let's get started:

• We take a piece of chipboard and use a jigsaw to cut out the desired shape (round, square) according to the finished size.
• We glue the edges with a PVC edge so that bumps and grins are not visible after cutting with a jigsaw.
• We attach a corner to the finished shelf and mark with a pencil the places of attachment to the wall and to the shelf.
• We drill holes on the wall with a drill and on the stand too.
• On the back of the shelf with a hacksaw, we make small grooves for the wires.
• We attach the shelf to the wall, and lay the telephone wire.
• Using a screwdriver, we fasten the corner to the shelf, then to the wall.
• The shelf is ready.

This is the most budget option. The same shelf can be made of metal.

The main thing is that the foundation is installed with high quality and in the right place. You need to install it in a place where you are more often and often talk on the phone.

If you want an exclusive shelf, it is better to order patterned corners from a wood or metal master. You can order a finished design. Choose a design model so that it pleases and serves you for many years.

Standard cabinet furniture has long lost its relevance, it was replaced by a variety of hand-made wall shelves.

The design of such interior items is in no way inferior to high-tech or loft-style furniture.

Materials for manufacturing are quite light and affordable. They can find their application in any room or apartment.

By replacing old furniture with shelves, you can expand your space for something useful.

The most common types of wall shelves

The equipment of the shelves will provide additional comfort and coziness, they will be indispensable in the children's room, kitchen or hallway.

Making furniture on your own is a rather laborious and complicated process, and assembling shelves is within the power of everyone, because this does not require any special experience. For this, any materials are suitable.

The functionality of the shelves will exceed all expectations. In addition, you can easily place decor items and various trifles on them, which will give your room a lived-in look.

Currently, open wall shelves are popular, their purpose depends on the location:

• for scarves and hats in the hall;
• for souvenirs and dishes in the hall;
• for cosmetics and photographs;
• for personal hygiene items in the bathroom;
• for textbooks and stationery in the nursery;
• for condiments and containers with bulk products in the kitchen.

Also, the shelf can be designed for a specific item, such as a musical instrument, souvenir edged weapons, etc.

The aesthetics of the shelves must be observed in all rooms, whether it be a garage, a pantry or a warehouse. It is always a pleasure to look at neatly arranged and folded things or tools.

Often it is the shelves that are the subject of decor, they are able to attract attention with the intricacy of lines and unusual shapes.

But if you focus on the items that you want to demonstrate, then the shelf should be weightless and transparent, for example, made of glass.

Shelf design classification

Proper distribution of the load on the wall and shelf is one of the most important aspects when assembling them. Very often, objects that are not intended for this are attached to the wall, for example, shelves for shoes or large flowers.

In this case, the main thing is to choose the right material and fasteners that will withstand the weight of items placed on the shelves. There are several types of wall shelves, differing in their design:

• open and closed;
• console racks;
• angular and straight;
• with or without a back wall;

• multilevel;
• with right angles or rounded;
• various geometric shapes;
• use of various materials (glass, mirror, wood, metal, plastic).

Mounting types

Fasteners fulfill not only their intended purpose, but can also be a decorative item in themselves, for example, sidewalls made using artistic forging, macrame fasteners, various ropes, belts and cables.

You can securely fix the shelf on any surface with dowels, anchors, brackets.

Choosing a room for homemade shelves

As mentioned earlier, shelves can be placed in any room, even in a nursery, they are designed to create comfort and decor. When making them, use a children's theme.

In the living room, they will help to rationalize the space and save you from unnecessary bulky old furniture.

In the kitchen, in the hallway and in the bathroom, they can be an independent piece of decor, as well as perform their direct functions, which will streamline your life.

If you decide to equip wall shelves with your own hands, the procedure is very simple.

First of all, it is necessary to take dimensions from the place where it will be placed, make a sketch, select the material and type of fastening, taking into account the workload.

The final stage of work will be fine-tuning and polishing your shelf to give it the most aesthetic appearance.

It remains only to place your favorite items on it and enjoy the fruits of your labors.

DIY shelves photo

If you have a desire to do something, then a do-it-yourself phone shelf is the best way to get started with housework. Manufacturing does not take much time and investments are minimal, but the output will be interesting options for the interior of the entire room. You can use a regular edged board or chipboard. The first option is more beautiful, but you have to wait and the whole process will take up to a day and a half.

Classic variant

It will require:

• Roulette
• screwdriver
• Electric jigsaw
• Pencil
• Scissors and paper

First, an ordinary rectangular shelf is prepared, where it is possible to attach a rack with a telephone directory and other small devices. The side shields are equipped with 2 similar stripes. The width is at the level of 25 centimeters, and the height is 30-35 centimeters. On the front side, you can round off all the sharp corners. This will protect your hands and other parts of your body from accidentally hitting a dangerous surface when you try to pick up the phone abruptly.

Mark on the tile in one place where you will cut, and then do a similar operation on the other side. Mark everything with a regular pencil so that everything can be easily erased later. You can cut off the excess with a simple electric jigsaw.

The shelf for the phone in the hallway does not exceed 40 centimeters wide. The depth of the plates themselves does not change - 25 cm. The bottom shelf can be made such that it can fit a telephone directory or accessories for the phone - headphones and a charger. The height of the inner part can reach 11-14 cm. But there is no need to install another horizontal bar.

When assembling, measure and drill holes where horizontal ceilings are then inserted. Only then can screws for furniture be screwed in there. If this is not done, then the tree easily splits and loses its pleasant appearance.

Newfangled option

People tend to simplify their activities in any matter. Here a lot depends on what shape you decide to choose - round or rectangular. Masters can contrive by choosing completely outlandish architectural views. This shelf is inferior to the previous one in that there is no longer a place for a reference book or other things. But you can very quickly connect to all electronic devices in space.

Here the instruction on how to make a shelf for the phone is quite simple. First you need to prepare three different plates. One will be 35 centimeters long, 2 cm thick, and about 10 cm high. The second will be the same in thickness and height, and about 17 cm long - a stiffener. The third one is identical in thickness, 35 cm in length, 20 cm in width - the same “stand”. Putting it all together is not difficult. Insert two screws for furniture into all joints.

For the stiffening rib, it is necessary to enter from the other side of the bearing shield, which hides all the elements of the work. The upper part, when drilling in the bearing part, contributes to the fact that the rib becomes a support element, and with full drilling, you need to beautifully hide the butt points, which is not always possible when working for the first time.

The basic design, for all its modernity, needs decorative elements, otherwise it looks too simple and faded. On the wall, everything should look harmonious without elements that immediately catch the eye. Good photo shelves for the phone clearly show us that you can always make very beautiful, reliable and original options.

Additional Information

You can apply an element that fits both cases above - this is an edging that runs along the outer edge. To attach it, you need to find some kind of heating surface, for example, an iron. With simple movements, apply it and secure the edging.

Be sure to try to hide any connections that come out. Before drilling, you need to remove a small section. Its diameter should match the diameter of the screw head. After everything has been drilled successfully, you can drip glue on the wood, and then the cut element is pressed.

If all this is done carefully, then nothing will be noticeable. It is necessary to drill with a specialized drill, which ends with a special head, which helps to create a groove just for the size of the cap.

Usually a hinged shelf for a phone, when made from chipboard, a special pattern is also applied. First, a small hole is made, and then, for example, a gnawed apple is cut out manually with a jigsaw. In this case, doing it yourself is justified.

When fixing to the wall, you need to screw a couple of fasteners on the back side, and for a good fit, you can take 3-4. If everything went well, then do not rush to rejoice. The shelf must be disassembled and reassembled again, gluing all butt joints with glue. Then you can safely forget about the service time of this item in the apartment. Everything will last quietly for 20, 30, and 50 years. The main thing is that your eye should be happy with the final finished product.

Photo shelves for the phone

What could be more commonplace than an ordinary hanging shelf on the wall? But a good imagination and skillful hands can work wonders with such a simple object, turning it into a beautiful interior design element for your home.

One of the methods of decorating a room is the use of shelves.

All materials have their advantages and disadvantages. The following are suitable for wall shelves.

• Wood lumber - is the most common and cheapest - it is easy to cut into blanks, process and paint.
• Metal is not always suitable, it is more difficult to process it at home, shelves made of it do not fit well into the home interior, they are prone to corrosion.
• Glass - looks great in the interior of any room, makes the shelves visually lighter and more airy, but due to its fragility, it requires special tools and equipment for cutting complex holes and grinding.
• Plastic is the lightest material that can replace all the previous ones.

They hang shelves on the wall, put them on the floor, some are hung from the ceiling or beams.

NOTE! The fantasy of a person in choosing material for shelves on the wall is inexhaustible - old suitcases, TV cases, water pipes and corners. Even ... trouser belts can be used as fasteners.

Much more often they are functional.

Buy or make a shelf on the wall with your own hands

What is the advantage of homemade wall shelves over purchased ones? Furniture stores offer options for all occasions - bookshelves, for dishes, for phones, for flowers. But in defense of homemade products, the following arguments can be made:

• the purchased shelf does not always correspond to your ideas of beauty - either the color is inappropriate, or the shape is awkward;
• the dimensions of the purchased product do not fit into the dimensions of your room;
• the height or width of the shelves does not match the size of the things you want to place on them;
• after the repair, there were pieces of good material and fasteners - it's a pity to throw it away, but there is no desire and place to store it.

But best of all - they are easy to make yourself, with your own hands.

ON A NOTE! Making shelves on the wall with your own hands is often cheaper than buying them in a store of a well-known furniture company.

They are made of wood, plywood, laminated chipboard, fiberboard, there are glass shelves.

Shelves are different

Before assembling a shelf, determine what type it will be. Furniture craftsmen got the hang of making wall shelves for all occasions:

• open - without side walls, front doors and back wall;
• closed - in essence, such shelves are hanging cabinets in miniature, differing from them in their smaller mass, depth and height;
• corner - located at the junction of two walls, can be both for the inner corner and for the outer;
• asymmetric - the layout of the shelves is devoid of an axis of symmetry, subject to the preservation of functionality;
• suspended - harnesses, cables, dense fabric materials, belts are used as hangers for shelves, and the ceiling is used as a support;
• decorative - designed to beautifully arrange interesting things.

The same materials are used as racks, but they are also made of metal, plastics and other absolutely incredible things - for example, pipes or bottles.

The module is a universal solution

The easiest way is to assemble wall shelves, consisting of side, top and bottom walls, fastened together with self-tapping screws or furniture fittings. Make such "modules" of different lengths and heights as needed and fix them on the wall in the right order. This option is well suited for the manufacture of bookshelves.

In living rooms, it is not so important what material the shelf is made of. It is important that its design is in the same style as the interior.

You will need the following materials and tools:

• a board 16-20 mm thick and 150-180 mm wide - it can be pine, MDF, plywood or chipboard.
• self-tapping screws;
• screwdriver;
• building level;
• furniture hacksaw for wood.

Even the functionality is not always important: some play an exclusively decorative role. On them, if there is something, then one or two items.

Marking and sawing

The height and width of the shelf is chosen arbitrarily. If the ends of the upper and lower walls rest against the edges of the side walls, then, when determining their height, it is necessary to make an allowance for twice the thickness of the board.

Their role is to give the interior of the home a special style and color.

ATTENTION! To cut the board, use a hand circular saw or electric jigsaw. Their use allows you to make the cut surface even.

If we talk about shelves in technical rooms - the kitchen and the bathroom, in particular, then practicality requirements are added to aesthetic considerations almost everywhere.

When marking parts for corner wall shelves, the upper and lower walls are made of two boards with oblique ends. Their connection must fit exactly into the angle for which they are intended. The surface of the ends is smeared with carpentry glue, the boards are connected and tightened with clamps until completely dry. Additionally, you can fasten the corners with self-tapping screws.

Workpiece processing

Before installation, the wooden parts of the shelves must be sanded and a protective coating applied. You can treat the wood with stain and varnish. However, such a shelf does not always fit into the overall color scheme of the interior. Then it is better to apply a primer and paint in the desired color.

For safety, in the place where the self-tapping screw is screwed into the lower part of the sidewall, it is necessary to pre-drill holes with a thin drill.

Shelf Assembly

To fasten the walls with self-tapping screws, it is necessary to mark the holes. From the end edge of the bottom wall measure a distance equal to half the thickness of the side and draw a line parallel to the cut. Marks are made on it for the drill, stepping back five centimeters to the left and right. Also mark the opposite end. Make holes. Fix the side walls of the shelf with self-tapping screws. Produce markings and fasteners of the upper wall of the shelf in the same way.

So that the shelf is even, and subsequently it does not warp, in the lower part, on the reverse side, you can fix the location of the parts with flat window corners.

ON A NOTE! Other methods can also be used to fasten the walls of the shelf - wooden dowels with carpentry glue, special mounting hardware - tie corners, eccentric tie.

Despite the fact that electronic devices are replacing printed publications from a person's life, many people still carefully store books and magazines that are dear to their hearts, the storage location of which often leaves much to be desired.

Installing a shelf on the wall

It would seem - there is nothing easier. In fact, this is a crucial stage. You don't want all your efforts to ennoble your home to collapse in one moment, do you?

The easiest way to use a hinged corner for shelves. The upper eye is attached to the wall with a dowel, the lower eye is attached to the shelf with a self-tapping screw or a bolt with a nut and washer.

IMPORTANT! For shelf load of 20 to 50 kg, use brackets. Mark the holes on the wall using the building level.

Hands must be clean, because untreated wood is very easily soiled.

The dimensions of the shelf will depend on the size of the books on it will be stored.

Manufacturing of honeycomb shelves

A shelf of the original form requires imagination and a little more diligence, but your efforts will more than pay off - the original product will enliven the interior of the room.

1. We saw the board into 15 pieces 300 mm long with a cutting angle of 30 °.
2. We make the first "cell". To do this, we glue the hexagonal section and strengthen its corners with self-tapping screws.
3. All other “honeycombs” of the shelves are made without one wall.
4. We fold them on the floor in such a way that the missing face is replaced by the wall of the adjacent section. We fasten together with glue and screws.
5. If there are segments of sufficient length, then you can make shelves inside the “honeycomb” itself.

Each part must be processed with a grinder, only then it can be fastened with other parts into a single structure.

IMPORTANT! To avoid the appearance of cracks and distortions when tightening self-tapping screws, pre-drill holes with a diameter of 1.2 mm or more.

Of course, you can not do without a tool. The minimum is a wood saw and a Phillips screwdriver.

The requirements for strength are imposed on bookshelves: they hold significant weight.

Bookshelf with hidden fasteners

If your taste is offended by the type of fasteners, then you can make a small open shelf with hidden fasteners.

First of all, you need to think over the dimensions of the shelf being made and decide on the place where it will be located, only after that purchase boards.

You can often see when people decorate their homes with artificial flowers, but still nothing can replace the freshness of a natural beautiful plant.

For this you need:

• wooden beam with a thickness of 25-30 mm with a well-polished surface;
• board of the same thickness, made of the same material;
• pins - cylindrical pins made of wood;
• wood glue;
• dowels and screws.

Thanks to a modern universal tool, a home craftsman can make almost any shelf, even in an apartment, not to mention working in his workshop.

The assembly of such a shelf consists of the following steps.

1. Saw the timber and the board into blanks of equal length.
2. Using a template, matching holes are made in the side of the bar and the future shelf, the diameter and total depth of which should match the length of the dowels.
3. The beam is attached to the wall with dowels and self-tapping screws.
4. Pins lubricated with glue are carefully hammered into the holes of the beam.
5. The surfaces of the beam and the shelf that will be connected with their help are also lubricated with glue.
6. The shelf is “put on” on the dowels and pressed tightly. For reliability, you can gently tap the entire length of the side of the shelf with a rubber mallet.

Of course, you immediately want to make something voluminous and beautiful, which is quite natural, but first you can try your hand at making a simple but neat shelf.

Such a shelf will look like a natural extension of the wall of your room. Just don't load it with a lot of items.

Moreover, these products can be the first self-made things. It's really simple.

Decor is everything

You assembled and hung the shelves on the wall. But they look unpresentable - too empty or, on the contrary, littered with books and other trifles. To make the wall shelves in the interior of your room look aesthetically pleasing and eye-catching, follow these simple rules.

• The law of three colors is one dominant color for the shelf and two complementary colors for the items on it. It is desirable that the color of the shelf contrasts with the objects standing on it - this way they will look more expressive.
• Control chaos with triads. Arrange items with similar colors on different shelves so that they are at the tops of imaginary triangles.
• Give more air - some things, especially large ones, require more free space on the shelf.
• Small gizmos need a favorable background. For example, a figurine standing on a shelf next to a luxurious vase must be moved away from the spectacular neighbor and placed against the background of a small watercolor painting.
• Try to place objects that are similar in size and color relative to imaginary vertical or horizontal axes of symmetry.
• The higher the shelf, the lighter the items should be. It is desirable to place all massive objects on the lower shelves, and light ones on the upper shelves.
• Do not forget about functionality - on a shelf located at the level of your gaze, place those things that you use most often.

A simple design is good: you can make any shelves with your own hands.

Don't be afraid to experiment. A wall shelf can be made from any material, but lumber is best. Use hanging brackets or brackets for installation. And do not be too lazy to beautifully arrange books and vases on them.

Structurally, most of the shelves consist of the actual shelves and jumpers.

VIDEO: Do-it-yourself shelf (how to make a wooden shelf)

Mobile communication devices are in every home, they have become almost indispensable for a modern person and perform a lot of functions. Therefore, quite often they need to be kept not in your pocket, but on your desktop, so a smartphone stand is a necessary thing for everyone. There are many ways to make a phone stand, but one of the best options is of course wood, as it, despite its hardness, will not scratch the smartphone and will look good both in the office and at home on the table.

The easiest way to make a wooden phone stand with your own hands is to simply make it from a regular plank. The design of such a product is as simple as possible - a groove of the required width is made in the board and the stand is ready. Since the board has a large plane, and after you put the mobile into the slot, it will stand firmly and securely on the table.

The most important thing about this wooden phone stand is the area of ​​the base that will be in contact with the table, it must be large enough to handle the functional load. As a base, such a homemade phone stand can have any wood and can be shaped into any shape. And the manufacturing process itself is limited to the fact that a groove is simply made in the plank with the help of a milling cutter. The groove can be made flat or sloped, depending on the angle at which the device should stand.

When you make a stand for a smartphone with your own hands, it is important to sand it well, especially in the groove area where the mobile will stand. After all, if there are irregularities, then you can scratch the glass, and this will spoil the appearance of your gadget.

Complex design

If you want your mobile device to be always in sight, not lost in documents, and at the same time your table looks beautiful, solid, then the stand should be appropriate. To do this, you can make it not just from a plank, but from several parts. Don't worry, it doesn't require a lot of tools or material either. The most important thing is not to rush and carefully consider the design that your homemade product will have.

A good do-it-yourself smartphone stand, which is suitable not only for any phone, but also for a tablet, and at the same time will be as stable as possible, can be made from two small planks.

The design of such a stand is as simple as possible, two identical rectangular wooden blanks are taken. On the one hand, about a quarter from the edge, a slot is made to the middle of the board. It is important that the slot does not run at a right angle, but obliquely, so that the stand is more stable and has the correct slope of the plane that will support the phone. On both blanks, a slot is made up to half the width of the blank.

For someone who is just starting out, it can be problematic to find the right angle for the slot. But this is not difficult to do, just attach two parts to one another at the planned angle and just make marks on the side of the end. Well, in addition, so that the phone does not slip, you need to make a groove on a horizontal plank, or stick a small bar that will be a stopper.

After all the cuts are ready, it is enough just to sand the stand well so that the bumps do not scratch the phone case, and cover it with tinting or just varnish.

There are many ways to make a phone stand of this design, for example, you can make a curly vertical part of the stand, which will greatly improve its appearance. Forms can be a variety of hand, leaf, animals, and in general everything that you think of, since a tree can be given almost any shape.

How to choose a stand design

There are quite a few ways to make a smartphone stand, but wood options are not only durable, but also beautiful. In addition, they look much nobler than other materials, as a properly selected wooden accessory will decorate any design, regardless of its style.

Therefore, in order for your handmade mobile phone stand to be beautiful and original, try to choose the right design, size and color. Of course, you should not forget about such parameters as functionality and stability, since if a cell phone falls, it can simply be damaged.

You can make a variety of phone accessories at home and you don’t need a special tool for this. In most cases, with due diligence and patience, you can get by with a simple hacksaw, chisel, sandpaper and a piece of plywood. Then just glue your sample from small parts and at home it will also be easy.

Do not be afraid to experiment and fantasize so that the stand you made is unique, and not like everyone else. After all, mass production is organized in such a way that anyone can afford to buy beautiful and seemingly diverse things. But truly bright individuals prefer unique things in a single copy. Such things are not sold in stores, they can only be ordered or made independently. The second option is much better, not only in terms of economy, but also in terms of the manifestation of individuality.

Even if you do not have experience in making any wood crafts, do not be upset, as there is nothing difficult in this. It is enough to carefully plan everything, calculate what tools and materials will be needed, and only after that proceed to the work itself. If something doesn’t work out for you, then you can try again, rarely does anyone manage to do everything right the first time, everyone learns and everyone makes mistakes. But this is the only way to gain experience and learn to do things right.