home

Homemade stand for a soldering iron. How to make a stand for a soldering iron with your own hands? DIY soldering iron stand is a sign of good work style DIY automatic soldering iron stand

Good day to all.

Today I want to tell you about a universal soldering iron stand that I purchased on eBay.

Not that I was an ardent lover of something to assemble or solder, but, at times, it happens that you can’t do without a soldering iron. Either the wiring must be soldered somewhere, then the button must be resoldered, then something else will come off or break suddenly and at the most inopportune moment. Since I got a soldering iron, all these problems have become easily solved and not as global as they used to be. But still there was one caveat - sometimes you had to solder something extremely inconvenient when you hold the wires with one hand and try to solder them with the other. In such cases, it becomes very problematic to take solder, and then I had to resort to the help of my wife :) Use it instead of a wire retainer. My wife did not really like this work and I once thought about acquiring something more trouble-free than a woman. In other words, I started looking for a stand. To my great surprise, I didn’t have any problems finding this device, but it’s a real problem with diversity - I managed to find only a few models that did not differ much from each other in their functionality. In the end, I decided not to overpay and purchased one of the cheapest lots - a rack that cost only $9.19. Perhaps some of you will say that this can be bought at some hypermarket or radio equipment store, but let's not forget that this review was written by a resident of Belarus, and we have a completely different situation here. Yes, and than to go shopping, it’s easier for me to place an order via the Internet and receive it in the mail after a couple of weeks.

The seller was quite nimble and sent my package a few hours after payment. If anyone is interested, then you can see the movement of a parcel from China to Belarus.

For a not very long journey, the parcel got very badly: one of its sides was terribly badly wrinkled.

But there were no losses and the contents of the package were not damaged. True, I can’t imagine how this is possible, given such damage to the packaging :) As you can see, the factory packaging was once a beautiful colorful cardboard box with fairly high-quality printing. Our stand is drawn on the front side of the box, and its main characteristics and capabilities are on the sides.

Inside the box was our stand, as well as a black and white instruction manual. The stand is delivered unassembled, the grips are in a separate cardboard box, the soldering iron holder, made in the form of a spiral, also comes separately.

There are no complaints about the quality of workmanship. Plastic immediately after receiving issued a not very strong, but not very pleasant smell. Today it has decreased significantly, but the stand still smells, however, this is not critical, since much more pungent odors appear during soldering :)

There are 2 mounts on the stand - a movable articulated one for grippers and a stationary one for a holder.

They are fixed with special clamping screws with plastic caps. It seems that they are not very flimsy, but this saving seemed to me not very appropriate. When you try to clamp the mount, you can not calculate the applied force and break the plastic. It would be much better if these screws were completely metal.

Tool holder with knurled end, which allows you to securely fix it with a clamping screw.

But the fastening of the grips is simply pressed against the rack, which is also not very good. It is impossible to fix it securely, one way or another it remains movable: (Most likely, you will have to drill small holes for the clamping screw on the back of the holder, or resort to using electrical tape :) By the way, the entire part of the structure on which the clamps are installed is connected using articulated connections. Thanks to this, you can easily position the paws as soon as your heart desires. There are 3 such connections in total, that is, this design can bend in 6 places almost 360 degrees. There are no problems with the choice of positions here and cannot be. The grips here are a la crocodiles, with a fairly tight spring, so you need to be careful with fixing fragile objects. But everything is clamped securely - nothing will accidentally fall out.

The lambs are clamped with a decent effort. You may need pliers to fix it :)

And above the whole thing is a plastic magnifying glass fixed on a bendable support. If you believe the seller and what is written in his ad, it magnifies 3.5 times, and if you use a small insert located at the top of the magnifying glass, then 12 times.

I don’t know about the accuracy of these data, but the fact that glass magnifies is a fact.

Right there, near the magnifying glass, you can see a button that turns on the backlight. Yes, yes, this stand has a diode backlight, which can be useful in some cases. The button is pressed well, smoothly. So far, there have been no problems with her work.

It includes 2 diodes located under a magnifying glass. Not that these diodes give light like a normal lamp, but to highlight some small area or disperse the shadow of their power is enough.

This whole cunning circuit is powered by 3 AAA batteries, which are installed at the foot of the stand.

Assembled, the whole structure looks like this:

And finally, about the shortcomings. Or rather, not so much shortcomings, but about what I would like to see here. And I would like to see here a built-in socket and a cord to connect the stand to the network. I think it would be convenient to plug the soldering iron into the stand, and not into the outlet - there would be more room to maneuver, so to speak. Perhaps, if I'm not too lazy, I'll try to modify the stand myself :)

Overall, I was very pleased with this purchase. The stand turned out to be very comfortable, practical and functional. It fully justifies its cost and, definitely, will be useful to everyone who has ever held a soldering iron in their hands. The only 2 nuances that can be a little frustrating are the plastic lens, which is likely to get scratched over time and the “lambs” are not very conveniently clamped (but this is only if you want to clamp them very hard).

And this is what she looks like fully armed:

Basically, that's all. Thank you all for your time and attention.

I plan to buy +46 Add to favorites Liked the review +35 +65

The main tool of a home radio amateur is a soldering iron. Unlike other appliances, it cannot simply be placed on a table (workbench) during operation. Why? Correctly! He is hot. Therefore, you will need a special stand.

There are many different devices on sale, from a simple holder to a whole complex called a soldering station.

In most cases, a soldering iron is needed to perform urgent repairs. If you are not a professional "homemade" - the tool usually gathers dust in a box on the balcony, appearing once or twice a year. In such cases, many use the first object that comes across as a stand.

However, if you put in quite a bit of effort, a hand-made soldering iron stand will look no worse than a factory one. Especially if you regularly make electrical circuits.

Required minimum for stand

Stable foundation. Made of a material that conducts heat poorly, or equipped with legs
Soldering iron supports
Container for rosin (flux).

Additional options"

Tinning area
Solder container
Sting Cleaner
power regulator (can be of two types: smooth adjustment, or stepwise limitation for the time of a break in work).

Flipping through old magazines

In old Radio magazines, you can find drawings on how to make a stand with an economical load switch.

as a basis ( 1 ) a board with a selected middle is used, or a U-shaped structure made of a strip of plywood and two bars along the long edges
A 220 volt relay contact group is located under the surface ( 2,4,5 ) with large collector areas. The wiring diagram transfers power either directly or through a diode. The radio element "cuts off" the half-cycle of the alternating voltage of 220 volts, reducing it to a value of 110
Through pull ( 6 ), spring-loaded ( 7 ) button ( 8 ) presses the contacts when the soldering iron is on the stand. Electricity is spent half as much, while the soldering iron almost instantly warms up to full power. The rod is attached to the console ( 9 )
The tool itself is located on the brackets ( 3 ) and ( 10 )
At the rear is a soldering iron socket connected to the relay output contacts. The power cable is connected to the input
Between the racks, they usually nailed a tin of shoe cream or petroleum jelly to store rosin

The design is simple, but convenient and effective. If you don’t want troubles with contacts, we make a simple functional stand. Again, from the experience of Soviet radio amateurs.

The stand for the soldering iron is an indispensable attribute of the soldering station. It can be purchased at any hardware store or market. However, its cost is quite high. To save their own money, a stand is made for In addition to the financial issue, its functionality is considered. That is, it can be used for various needs in the household or in the production workshop. There are a lot of manufacturing options. All of them differ in the complexity of the design and the amount of time spent.

General information

As mentioned earlier, a do-it-yourself soldering iron stand is a convenient fixture that performs many functions. First of all, it is a protective surface, which prevents damage to property.

Before working with the soldering unit, it must be warmed up. In this case, the metal body is heated to high temperatures.

Soldering iron stand - what is it for?

A quality part is necessary for those people who perform a lot of soldering work. For the manufacture of such a device as a stand for a soldering iron, special skills and abilities are not required. The process uses simple and affordable materials and tools. The finished device is easy to handle. A homemade stand for a soldering iron should consist of separate elements. First of all, special containers are provided for rosin, flux and a department for mixing them. Some models are equipped with a box where small parts are stored. The soldering iron stand is suitable for any device, regardless of its power and degree of heating. In the manufacture of the structure, the location of these containers should be taken into account. Everything should be located so that it is convenient for the master to solder.

How to make a stand for a soldering iron?

It is unprofitable to buy ready-made stands, as they have a high cost and small overall dimensions, which are not suitable for all types of devices. Therefore, many users ask this question: "How to make a stand for a soldering iron with your own hands?".

Before starting production, it is necessary to prepare materials. To do this, you need to purchase the following components:

duralumin sheets, the thickness of which is 1.5-2 mm;
a small wooden block (various types of wood can be used);
varnish containers;
two metal boxes.

When all these parts are purchased, you can start making the stand.

So, in the plate you need to make several holes. Containers for rosin and alcohol will be fixed on them. Cans are easy to install. Containers should be easily inserted into the structure, and also fit snugly against each other. After these procedures, it is necessary to make a support. It is made by bending the base.

If necessary, each person can make special racks that raise the structure a certain distance. This is done for convenience in the process. The preparatory work ends with the processing of the duralumin sheet with a file or sandpaper. Corners should not have sharp ends.

Construction assembly

So, let's start assembling the stand for the soldering iron. The prepared support must be fixed to a wooden beam.

This can be done with screws. Next, the prepared small containers are attached. They are attached to the base with special glue or epoxy. Many craftsmen also install a small container between the racks. It can store small parts that will be needed in the process.

From wire

A wire soldering iron stand has gained great popularity among many craftsmen and hobbyists. It can be made from an ordinary tin can. In the process of assembling the installation, simple details are used:

tin;
large diameter pencil;
washers and bolts;
wire.

First you need to make a spring. The first thing to do is to purchase wire from the store. Some people remove it from other room fixtures. It must have a sufficiently large thickness so that a soldering iron heated to high temperatures does not destroy it. In addition, only high-strength material will be used. The finished product should spring.

We cut off the required length of wire and carefully align. To create a spring, a large diameter pencil is used. Holding the wire, carefully wind it around the pencil. The result should be a tight spiral. At its end, a special mount is made in the form of an eyelet. For these purposes, pliers are used.

The next step is to prepare the can. A small hole is drilled in its bottom.

This can be done with a nail or a drill. Next comes the stand for the soldering iron. The prepared spring is inserted into the jar and the structure is fixed with a bolt and nut. Washers are used to ensure a stronger mount. This method is quite simple. Anyone can make a soldering iron stand. It does not take much time to make it, as well as special tools.

Soldering iron stand with power regulator

More and more people prefer to use this type of stand. Its essence lies in the fact that it is equipped with a special device that independently adjusts the degree of heating of the soldering iron. Therefore, the device does not overheat and does not fail. The stand differs from other types in that it requires an electrical connection to function. For the manufacture of a variant with a power regulator, it is necessary to take the following elements:

copper wire;
a small piece of plywood;
transformer;
LEDs;
details for fastening;
resistor;
wires;
socket to connect to the network.

After all the necessary parts have been purchased, proceed directly to the assembly of the stand.

To begin with, the size of the installation is selected. Based on this information, a base is cut out of a plywood sheet. Next, a transformer and other parts will be attached to it.

Fuse holder

The manufacture of this option does not take much time, effort, and also does not require large financial investments. A wooden beam serves as a base, on which the fuse sponges are attached. They can be of various sizes. It all depends on the personal preferences of the masters.

Stand Benefits

First of all, the main advantage is mobility. Homemade coasters are used by people who often do soldering, working within several workshops. Such a design is not always at hand. However, it is easy to make. In addition, there is no need to carry rosin and tin separately in different containers, since now they are stored in special jars on a stand. Therefore, home-made installations are successful not only among amateurs, but also among professionals.

How to make a simple model?

It happens that it is urgently necessary to use a soldering iron, but there is no stand for it.

In this case, there is no time to look for the necessary parts and run around the shops. Therefore, it is better to make a simple, but also reliable design. There are many options, but there is the fastest one. The stand can be made in a few minutes. An ordinary wooden block will serve as a base, and screws or nails will serve as supports. They are driven into the beam crosswise. This forms a stand on which the soldering iron fits well and holds firmly.

Conclusion

When soldering elements, a stand for the device must be present. This accessory is expensive, so it is better to make it yourself. Such a process will not take much time, effort, and also save money.

A little backstory. Long wanted do normal stand for soldering iron but didn't know where to start. Recently, I came across a lid (I don’t remember exactly why), which had been in the box for a long time.

She gave me the idea for the design.

To make the stand I used:

- "unknown" cover (stand);

- plywood;

- wooden bead;

- self-tapping screws;

- nails;

Description of work

To begin with, I removed everything superfluous from the lid.

On the sides were left "tongues" that will play the role of fasteners.

Next, 3 planks were cut out of plywood. Since the bottom of the lid is not even, a substrate was sawn out for convenient attachment to the base.

From three sawn boards:

the largest is the base of the entire structure;
the other two are the same. A soldering iron mount will be installed on one, in the other I made holes into which jars of fluxes for soldering will be placed. Also in the substrate, I made holes in the shape of the bottom of the lid.

I drilled holes in the tongues. After that, I screwed two identical planks onto the screws.

In order to prevent the flux jars from falling through, a small plank was cut out of plywood, two small glazing beads were sawn to the plank.

I nailed this plank to the base with carnations, placing sawn glazing beads under it.

A partition was cut out of tin into a lid. From the tin that was cut off from the lid, I bent the stand on which the soldering iron will lie. The partition was screwed to the base with screws through the holes in the cover. The stand was screwed to the board without holes.

Under the plank on which the soldering iron will lie down, I sawed out 2 glazing beads and nailed them to the studs.

I placed a sponge in the part of the lid with a partition. Cellulose sponge for washing dishes. Sponges that are sold specifically for cleaning soldering tips are no different from cellulose sponges for washing dishes, only in size and price. Sponges for dishes are much larger in size, and cheaper in price. This sponge was bought at a hardware store for 30 rubles.

The lower part was removed from the sponge. I also cut it to fit the lid.

The topic of soldering iron stands is quite well disclosed on our website. How is my stand different from others? — I tried to make it as compact, convenient and functional as possible. Do you want the same? - Please under the cat!

The main feature of this stand is the built-in regulator. was inconvenient in that he was constantly lost and mixed with another bunch on the table. This one is tightly screwed to the stand, it will never get lost and will not jump around the table.

The new one is better than the old one in that it has smooth adjustment and operation indication. Here is the schematic I used to assemble the controller:

Diode bridge - any that can withstand the mains voltage and the current consumed by the soldering iron. (the formula for calculating the current is Soldering iron power / Mains voltage) A suitable diode assembly or bridge can be pulled out of the input circuit of a computer PSU. Instead of a diode bridge, you can use a diode, then the adjustment range will be from 50 to 100%.

Fuse F1 is desirable, but not required.

Switch S1, S2 - Bipolar toggle switch with middle position. In the middle position, the soldering iron is off and the HL1 LED will not light. In the position indicated in the diagram, the power of the soldering iron is regulated by the trimming resistor R3, in the opposite position of the toggle switch, the current goes directly to the load, bypassing the regulator.

I made all these muddles personally for myself, and it is not necessary to repeat this scheme exactly. Yes, a suitable scheme can be gleaned from there.

Regulator board:

To cover the giblets of the regulator from external influences, I made a plastic case, bent the edges with a technical hair dryer:

We figured out the electronic filling of the regulator, now we move on to creating the nodes of the stand itself.

In order not to lose various small items and store solders, I made a small box of tin, the corners of which for strength:

The soldering iron stop itself is, in my opinion, the most successful design. In order for the soldering iron to hold well in such an emphasis, when inserting it, its center line should be below the stop horns.

When soldering, a fixture is often necessary, but you don’t always need to clutter up the table with such fixtures - just attach a crocodile clip to the stand, which is fixed with a screw: