Entrance hall from chipboard scheme and dimensions. DIY hallway with photo: complete instructions

The entrance hall is the "face" of the house, so its appearance should be original and beautiful. But it is not necessary to pay impressive amounts for an expensive design project, because it is quite possible to decorate a stylish entrance hall with your own hands. It is enough to choose a suitable interior style concept, prepare the necessary materials and tools, and then boldly get to work.

Making a hallway is one of the most important stages in the arrangement of any apartment. Such a part of the dwelling should remain roomy, compact and neat, which is achieved only by competent design of its appearance.

An excessive number of decorative elements will have to be abandoned, because the main purpose of this room is to store things. But it’s also not worth sacrificing design in order to save space or money, because the hallway is also the hallmark of the room.

To successfully achieve this goal, it is necessary to carry out a lot of calculations, draw up drawings and determine the dimensions of future drawers, cabinets, cabinets and other items. Their number should be determined by the area of ​​the room and the number of family members living in the house. The main thing is not to overload the space with unnecessary elements.

Unusual hooks on the wall, as well as a niche for storing shoes, look especially beautiful. A wooden bench will perfectly fit into the spacious hallway, which will emphasize the elegance of the interior and give it a peculiar zest. The most win-win option is a sliding wardrobe, which is suitable for almost any interior style. And wardrobes-dressing rooms are not only roomy, but also convenient to use.

When choosing suitable finishes, it is important to be guided by the practicality of future furniture. If the area of ​​​​the room is very limited, it is better to combine the functions of storing shoes and clothes in one multifunctional closet. An excellent compromise between spaciousness and aesthetics is a corner cabinet. Despite its miniature size, it has great depth and capacity.

Given the specifics of the placement of the hallway, it is better to abandon the use of light colors in its design. On white walls or light-colored furniture, any street dirt will be very noticeable.

Making furniture with your own hands

Today it is relatively easy to assemble a hallway with your own hands. Hardware stores offer a wide range of materials and tools, and detailed drawings and instructions on the Internet will allow you to implement your plans without any problems.

In addition, some furniture companies offer the turnkey design of such a part of the premises in compliance with the individual requirements of the customer. But the option of making furniture for the corridor yourself is more interesting because of the unlimited possibilities in choosing colors, materials and textures that match the style of the hallway.

Making furniture with your own hands is much easier than it seems. But this design option can differ not only in advantages, but also in disadvantages. The main advantages include the following:

1. Stylish interior design.
2. Matching furniture to the desired dimensions.
3. Low cost homemade products.
4. Opportunity to gain new experience and skills.

But besides the advantages, homemade furniture has significant disadvantages. These include the following points:

1. The final product does not always meet the initial expectations, because it cannot be as perfect as the store version.
2. The manufacturing process takes a lot of time and effort.
3. As work is done, a lot of dirt and dust appears in the house, so the rest of the family has to stay in other rooms for a long time.

With the help of available tools and materials, you can make not only furniture elements, but also a multi-level ceiling, as well as decorative items and accessories. First you need to understand the options for finishing. As a rule, this is wall painting or wallpapering. The second solution is interesting in that it allows you to choose original ideas in the form of wallpaper with photo printing or attractive patterns.

A great way to create a beautiful hallway style is to use warm contrasting shades. They will allow you to dress individual parts of the room or the furniture itself. The decorative part is also easy to do on your own. To do this, you can prepare the original upholstery, banquettes, knitted covers, flower pots and much more.

You can also decorate cabinet doors, entrance or interior structures with shells. With the right combination of shades and accessories, the hallway can turn into the brightest part of the house.

Main varieties and styles

The style of the future homemade hallway is chosen taking into account the size of the room, as well as the general concept of the interior. It is important to carefully consider the aesthetic aspects so as not to harm the main design idea, but, on the contrary, to emphasize it. Only after that you can proceed to the practical part and start preparing materials.

In any case, a home-made version will demonstrate a special uniqueness, since it is created solely through the imagination of the owner of the house. However, for successful work without the help of designers and engineers in the furniture industry, you will have to study various small details and important nuances. Among the key types of hallways are:

1. Angular.
2. open.
3. Kupeynaya.
4. Swing.

They are selected taking into account the specific type and requirements for furniture. The corner option is most in demand for rooms with limited space, because it allows you to maximize the use of empty corners, turning them into a useful place to store clothes, shoes and other personal items. Open shelves will be freely placed near the closet, and cabinets and classic hangers will be installed in another place. To achieve a visual expansion of space, cabinet doors need to be mirrored.

Open types are characterized by a minimum amount of furniture, while soft products will have to be abandoned, and the cabinet used will be very small. The complete opposite is the compartment hallway, which implies the presence of a closet of the same name. In this design, the furniture is quite roomy, because it is possible to store personal belongings of all family members in it, and also not to worry about additional space for clothes for different seasons.

Design solutions

When making a small-sized Khrushchev apartment, you need to use minimalist furniture, but without extremely small details. Closed storage systems are more promising due to the lack of feeling of overcrowding space or bad taste.

In the smallest corridors, you will have to do with an open hanger and abandon the closet. An important requirement for the design of a compact hallway is the visual softening of corners and the achievement of high smoothness of lines.

Despite the special elegance of natural stone or embossed panels, it is better to refuse them, because they absorb usable area and create a not very pleasant feeling when you are in a limited space. Also, you can not use large patterns.

When finishing furniture and wall structures, it is important to choose high-quality materials and manufacturing techniques that will preserve the aesthetic appeal of the room for a long period of time.

The best materials

If you are going to make a hallway with your own hands, you need to choose high-quality material for the upcoming work. Experts advise paying attention to furniture panels that are significantly superior to simple pine boards or other wood. They do not contain synthetic resin or other artificial impurities, which guarantees impeccable environmental safety. Of the minuses of the structures, only the high cost can be distinguished.

The use of laminated chipboard, drywall or plywood is justified in cases where saving money becomes the main selection criterion. And you don’t have to sacrifice style to cut costs, because the possibilities for designing modern materials are very extensive.

A good alternative to chipboard is MDF or parts from old furniture. This option is characterized by high build quality, as well as complete safety. Using improvised materials, you can carry out work on the design of the hallway without much difficulty. Indeed, when using aluminum pipes or steel products, additional devices and welding equipment will be needed.

Veneer is a good material, but its cost is quite high. When making a choice between melanin or laminate, it is advisable to stop at the second option, since it is characterized by reliability and durability.

Optimal sizes and colors

Having dealt with the necessary materials, you can draw up drawings and dimensions of future pieces of furniture.

Even if the corridor cannot boast of a spacious area, it should have enough space to install the following items:

1. Niche for clothes and shoes.
2. Changing seat.
3. Shelves for household items.
4. Storage system for hats, umbrellas, bags and other accessories.

You can combine different functions in one piece of furniture, which will achieve maximum space savings. If the lack of space becomes critical, you will have to limit yourself to a small floor or wall corner hanger, which is connected to a niche for shoes and a small seat. When installing the cabinet, you need to make sure that its depth is at least 40 centimeters. Corner models should have a length and width of 0.9 meters, and a height of 2.5 meters. The last indicator is selected taking into account the height of the ceiling.

The most important element in the design of the hallway is the color of the furniture. Designers recommend choosing colors taking into account such points.:

1. Wall color.
2. Color properties of other rooms.
3. The total area of ​​the room.

Light shades are characterized by the ability to visually expand the space and create a feeling of airiness. When arranging a narrow corridor that is elongated, in no case should brown or heavy scales be used. This approach will give the impression of being in a gloomy tunnel with an unpleasant atmosphere. The same applies to a spacious hallway, in which white colors are undesirable.

Fittings and tools

Equipping furniture for the hallway, it is necessary to prepare all the required fittings. It consists of door hinges and couplers, handles. Mechanical devices for folding doors. Also, sometimes you have to buy rods for hanging hangers, shelf holders, boxes and metal boxes.

If there are hinged doors in the closet, then they can be hung on four-hinged hinges. When arranging a compact door structure, you will have to do with furniture blinds. Corner ties for small cabinets are not suitable, because they spoil the elegance of the interior.

For self-assembly of furniture such tools should be prepared:

1. Saw or jigsaw.
2. Construction knife.
3. Screwdriver.
4. Sandpaper.
5. Measuring roulette.

You will also need consumables - screws, corners and hinges.

It is not difficult to assemble a cabinet, wall or any other furniture for the hallway with your own hands. It is enough to deal with the drawings, prepare the optimal dimensions, and follow the instructions for decorating the hallway. It is worth showing a desire and being patient, and in a short period of time the hallway will become a stylish and modern part of the house.

How to make a hallway Furniture in the hallway with their own hands.

An example of this hallway in the interior.

Hallway structure.

Structurally, the entrance hall consists of four parts - elements that, when combined, form a single set. Below is a list of elements of the furniture set in the hallway. Each element, with drawings and diagrams, is described on a separate page.

The entrance hall is made of laminated chipboard 16 mm thick. For facades, in this example, used frame MDF profile AGT with an insert of chipboard 8 mm. Of course, in each individual execution time other materials can be used for facades , profiles of other manufacturers, different content or in general, facade material in general. For example, install facades made of film MDF (PVC), facades made of natural wood on the frame of the hallway, or, if this is an economy option, then make facades from laminated chipboard, pasting the ends with an ABS edge 2 mm thick.

The project gives the dimensions of the facade panels themselves, otherwise what kind of facades they will be will depend on the choice of the master manufacturer.

Choice of design dimensions.

The dimensions of the elements of the hallway are selected taking into account the theme: - "Furniture in a small hallway." So, the depth of the cabinet and cabinets was chosen taking into account that they will be installed in the wall, up to the door to the inner rooms. Such piers, as a rule, rarely exceed 45 cm in width. Therefore, with a sidewall depth of 420 mm, plus the thickness of the facade and handle, it will just be somewhere around 45 cm.

In addition, since a full-length wardrobe cannot be squeezed into a narrow hallway, it is necessary to proceed from at least the minimum ease of use. Retractable holders for hangers (trempel) - microlifts just right for narrow cabinets. With their help, clothes can be hung in a shallow closet frontally.

Microlifts are simple and reinforced. Reinforced ones differ only in an additional guide rod. Microlifts come in different sizes: from 250 to 450 mm. The size that is needed in this project is 400 mm.

(these two photos are from dudo.home.pl)

Wardrobe width 600 mm., two doors. For outerwear, even for winter, this width is more than enough.

The height of the bedside table (2) is such that low shoes, boots, slippers, etc. can be placed on two shelves. Bedside table (3), 690 mm high, the top cover can be used as a small table. Small drawer . The lower compartment is designed for high shoes or perhaps for a vacuum cleaner, the tube and hose from which can find their place in the wardrobe under the lower shelf.

The height and width of the open hanger allows it to be used for everyday, frequently used outerwear, incl. and long raincoats, coats. A large mirror in the hallway is not only functional, but also very adorns the entire set.

hallway dimensions.

Hallway detail.

To begin with, I will give a general detailing of the product, by part numbers. Further in the description of the assembly diagrams, it will be easier to navigate, because. drawings are arranged by elements. It is very difficult to indicate part numbers on a single diagram, for which it would be necessary to create a large "out of format" sketch.

Detail of the facades of the hallway.

The hallway will be inferior if it does not have a solid spacious closet. It is not necessary to buy it at all, since the manufacturing process is quite simple.

Spacious closet in the hallway niche

The advantages of this option:

• you can choose any project that is most suitable for the hallway in terms of style and parameters;
• designers will not have to pay for the development of an individual project;
• material costs are minimal.

The main thing is that the furniture in the hallway should be roomy, compact, neat, not pretentious.

Details to consider when designing.

• must be exact dimensions;
• the presence of a crossbar to accommodate the hangers;
• hooks for clothes for every day;
• one or more shelves for hats;
• cabinet for storing shoes.
• mirror;
• small drawers for small items (gloves, scarves, etc.).

Furniture fittings for the wardrobe in the hallway

To assemble a wardrobe in the hallway with your own hands, the following tools and accessories are prepared in advance:

• guides for installing boxes;
• tires, if a "coupe" with a sliding system is conceived;
• hinges and handles for doors;
• clothes hooks;
• the number of nails, screws, self-tapping screws calculated in accordance with the project;
• wooden fasteners are also needed: confirmations, dowels for furniture assembly;
• furniture corners (metal, plastic) and plugs;
• you can not do without a standard set of tools (a screwdriver, a drill, an electric jigsaw, a saw for wood, a key for furniture confirmations, a mallet, a clamp, a square and a building level).

DIY cabinet assembly tool

It is better to take inexpensive materials that are easy to process. For example, even experienced manufacturers will not undertake to make furniture from solid wood.

• Chipboard is the most acceptable option for a future DIY product. This material is easy to cut, process. The building material weighs a little, so it does not need reinforced fasteners or fittings. An important fact is the low cost.

  

  Chipboard cabinet with mirrored door

• Plywood is a light, durable and denser material that can be used to make curly details, as well as welt patterns.

  

  Spacious eco-friendly plywood wardrobe

• MDF can be subjected to various types of processing (painting, tinting, staining, etc.). It is less durable than plywood.

  

  Sliding wardrobe and cabinet made of MDF in the hallway

• Fiberboard must be purchased for the back walls of the elements.

  

  Fiberboard for the back wall of the cabinet in the hallway

• Wooden beam for frame construction.

  

  Wooden beam for the frame of a homemade cabinet

• Edged boards (usually from pine).

  

  Edged board (pine)

• Drywall for interior space equipment with built-in niches.

  

  Homemade drywall wardrobe in the hallway

The most responsible approach is to take measurements. If a miscalculation is allowed, all subsequent work will be difficult or nothing will work out at all. There are various ready-made options with suitable sizes. If the finished drawings are not suitable, and the drawing skills are weak, you need to attract a specialist for this stage, who will think over the project with the right dimensions. Cutting materials and edging the end parts is better in a store that sells building material. Store services are inexpensive, but it saves a lot of time.

Assembling the wardrobe

This model belongs to the built-in ones, it is easier to manufacture, since the parts do not need to be calculated and cut out. The complexity of this option is that it is necessary to take into account the features of walls and floors.

The ideal solution for such furniture would be a niche with a sliding system, equipped with several shelves, a crossbar for hangers. The installation of the wings in this case is the same as for the interior doors (the wall and the floor are involved).

Very often, a closet is made in the corner of the room. This model does not have one side and back wall (and in some cases there is no floor and ceiling).

The base consists of a wooden frame, which consists of a pair of frames (front and side), assembled on self-tapping screws or nails. If the project provides for the arrangement of shelves and partitions, cross rails must be fixed to the frames in the designated places.

Instruction

Mark the walls, floor, ceiling in places where the frame will be installed, drill holes for the fasteners. It is recommended to mark the places of the paper clip as well.

We make markings for shelves, install corners

Fasten the front frame to the wall and ceiling with dowels. Check its verticality using a level.

We lay and fasten the shelves on the corners, install the vertical panel to the shelves inside the cabinet

Install the side frame.

In the resulting niche, wooden slats are attached to the walls, designed for shelves (cut shelves from plywood or chipboard). You can not fix the shelves by laying them on the slats or fix them with nails.

On top of our construction, we lay a horizontal shelf according to the level

The side is sheathed with drywall or laminated chipboard. Drywall is pasted over or painted. The side part, in which the crossbar with hangers will be located, must be strong (chipboard, plywood, but not drywall).

We prepare panels for the front side of the cabinet

Attaching the bottom and top panels

The final stage is the installation of sliding doors. Top and bottom rails are mounted respectively on the ceiling and on the floor.

Installing door rails

Here it is very important to observe the exact dimensions. First, they try to install the layout of the future door. Take any part whose height is the same as that of the door and install it inside the top rail. Check the verticality value and mark the area where the lower guide will be attached. The door must first be inserted by slightly pressing on the upper rollers, and then into the lower tire. To adjust the position of the door leaf, adjusting screws are used. A properly installed door moves smoothly, without hindrance.

We insert the doors into the guides, snap the latches and adjust the mechanisms in the roller systems

The above example is suitable for a simple small size structure consisting of two halves. With a good hallway area, it is possible to manufacture a more spacious model. Then the frame of the bars will not work. It is better to make a base from chipboard, and “fasten” its elements with the help of a common floor and ceiling. This method will allow you to place in a niche, in addition to shelves and a bar for hangers, also boxes for small items and other details.

Such a product will be assembled as a designer for dowels and confirmations. For this fitting, you must first drill holes. All this must be done very carefully and patiently. All fasteners for corners are kept in a clamp for a day.

Built-in two-door wardrobe in the hallway

Corner cabinet assembly

It will be easy to make a corner module with your own hands. For stability, modules are often made of durable solid materials (chipboard, plywood). These products come in several forms:

• triangle;
• L-shaped;
• trapeze;
• five-walled.

Basic configurations of corner cabinets

The most suitable for the hallway is five-walled.

Built-in five-wall corner cabinet

Detailed assembly diagram of the corner cabinet

Instructions for self-assembly of a corner cabinet

Shoe cabinet assembly

Convenient do-it-yourself shoe cabinet

This is the easiest process, because everything that is needed in the work is sold by the building materials store.

The design includes: an outer frame, several shelves with partitions. The width of the structure depends on the maximum shoe size, and the height depends on the number of shelves.

Addition of facades and clearances of cabinets for shoes

A good solution would be to combine a shoe cabinet with dresser elements. Or place it in a closet or corner wardrobe, which have open facades.

There is a lot of information on the Internet about how to make a closet in the hallway with your own hands. Therefore, by examining all the available data, the most suitable model can be successfully constructed.

Video: Wardrobe in the hallway, do it yourself

Inexpensive hallway furniture can be made independently. This is not only a way to save money, but also an opportunity to create a unique interior. It is only necessary to show imagination and master the basic techniques of working with tools and furniture materials.

First of all, it is necessary to evaluate what capacity the hallway furniture should be. The apartment is small, in which a family of two lives, one medium-sized locker and a shoe rack are enough. The general rules for furnishing are as follows.

1. Furniture in a small hallway should not interfere with the free movement of people.
2. A set of furniture for the hallway should not contain unnecessary items, the functional purpose of which is not characteristic of this room.
3. The style of furniture should correspond to the general concept of interior decoration.
4. The furniture set should include compartments for outerwear, shoes and accessories.
5. Furniture should be practical, not branded. Modern hallway furniture is assembled from materials that are resistant to household chemical detergents.

It is important to determine where lockers should be installed, shelves placed. Furniture for a small hallway is located near the front door. Next to it is a shoe rack. In a more spacious room, modular furniture for the hallway is installed, as well as chairs (armchairs) and a mirror.

In small hallways, furniture, the main part of which is a wardrobe, is optimal. Fittings (guides and rollers) are installed independently or ordered a ready-made sliding system. To do this, you need to know the parameters of the cabinet opening.

Important: shelves for hats should be at such a level that it is convenient for all family members to use them.

Technology for the manufacture of furniture from laminated chipboard

After the working drawing of the future furniture is ready, you should order the manufacture of its individual parts. To do this, they act in this way.

Specialized enterprises will perform "sawing" according to the provided scheme. In the same place, the visible edges of chipboard parts are pasted over with PVC tape, matched by color.

Tip: it is recommended to order milling of furniture parts for hinges in a furniture workshop. This operation can only be performed correctly with the help of special templates.

For further work, you will need the following tools and components:

• jigsaw;
• screwdriver with a set of nozzles and drills;
• angle clamps;
• construction knife;
• roulette;
• carpenter's square;
• marker;
• komfirmats, furniture screws, couplers, handles;
• furniture hinges, shelf holders.

Important: holes for confirmations are drilled with special drills. Their design allows not only to get a hole for the threaded part of the furniture tie, but also to prepare a place for the neck of the confirmation. Otherwise, cracking of the laminated chipboard layer is possible.

How to assemble furniture

Before assembling the furniture, all the parts are laid out in the order corresponding to the drawing with the specification. To accurately connect the parts, you need a flat surface, which can be a table or chipboard. To connect parts, the following steps are required.

Combining all the details in turn, we get furniture for the hallway, the price of which will be lower than that made at a specialized enterprise. Handles are screwed to the doors, shelves are installed. In the lower part we attach legs or supports.

Assembly and installation of drawers

This requires special guides that are attached to the sides of the drawers and furniture boards. Guides are of two types:

• telescopic;
• roller.

The gap between the furniture boards and the sides of the drawer should be 10 mm.

You can learn more about how the marking and installation of guides is done by watching the video.

How should furniture for the hallway look in a modern style

There are several techniques for designing cabinet furniture for the hallway.

1. The use of mirrors and glass with images. Mirrors can be mounted on the outside of swing doors. Glasses with stylized images applied by photo printing, using special paint or using chemical matting, are installed in wardrobes.
2. Installation of spotlights and the use of LED strips. The lamps should be near the mirror, and the LED strip should be placed at the top of the closet.
3. Furniture in a classic style can be decorated with carved elements, mosaics, paintings.

Using the information presented in the article, you can make a closet for the hallway, a simple hanger or a shelf for shoes with your own hands.

The following video will help you choose the style and configuration of furniture.

Sometimes the choice in stores simply kills with the monotony of their products. Most of the owners of houses and apartments know that it is not so easy to choose furniture for the hallway. If the room is small, then the cabinets in it simply cannot fit, or they will fill the entire space in it. But even those people who own spacious hallways can find themselves in a difficult situation, because the models that are on sale do not always fit into the overall interior of a spacious room.

If you do not have the opportunity to choose a suitable wardrobe, then you should not be upset, but you should think about how to make the perfect furniture for your home and you will have a do-it-yourself entrance hall. This approach helps to save money and get furniture that will suit you completely in all its parameters.

Is a novice master capable of such a task? Of course, yes, the main thing is to have the desire and all the necessary tools, as well as materials, which will certainly lead only to a good result. It is clear that it is better for masters who do not have experience to choose simpler models. But for those craftsmen who are not the first time engaged in the manufacture of furniture, it is quite possible to make models more complicated.

In order to facilitate your work, we have prepared interesting materials.

How to make a hallway with your own hands

From the very beginning, you should determine which model you want and with its dimensions. If we talk about a small room, then you don’t need to overload it with a lot of furniture, you should use standard hallway furniture, where there is a small compartment for outerwear, shoes and other necessary things.

If the hallway is spacious, then you can put a large closet in it. When the area of ​​​​the room allows, then such a closet can become a real dressing room, which every woman dreams of. The cost of implementing such a project will be higher.

You can also consider options that will be a compromise between appearance and spaciousness. But it is worth remembering that a large depth will allow you to put a lot of things there.

Having picked up the model you need, you can start taking measurements and start calculations. It is also worth making sure that you have all the tools that you need for this.

What tools and materials will you need

The following tools should be prepared in advance:

• electric jigsaw or file;
• screwdriver;
• sandpaper;
• construction knife;
• screws for furniture;
• corners;
• roulette;
• loops.

In addition, you will also need material in order to make a hallway. Experts recommend using furniture panels, as they are made from natural materials without the use of synthetics. This kind of shield is completely safe for health. But it has a very high cost.

LDSP is very popular. Bonding type resins are added to the composition of this material, which can adversely affect people's health if the edges of the laminated boards are not closed with piping. But on the other hand, such material has a low cost and excellent characteristics, and it is also very easy to work with it.

Do-it-yourself standard hallway

In order to make a simple entrance hall, you need to purchase the following materials:

• 12 pcs of loops;
• shields for furniture 7 pieces, size 1600 by 400 by 18 mm;
• plywood 6 mm thick;
• tongue-and-groove boards 2 pieces, 2000 by 240 by 18 mm in size;
• handles for furniture 6 pieces;
• three-dimensional rail with dimensions of 3000 by 40 by 12.

Experts advise starting with a pencil case. It has dimensions of 2000 by 400 by 400 mm. It is necessary to cut out the necessary planks from this shield, as well as the top cover with an overlap calculation. You will also need two shelves. The assembly is very simple. Planks should be marked in parallel and secured with a cover and self-tapping screws, and shelves should be installed. In order to ensure the strength of the frame at the corners, it should be fixed with the help of corners that are cut out of plywood.

Since the doors are located one below the other, it will be easier to install them than one, so this option will be more suitable. From the shield we cut out doors of the same size and several shelves as you wish. Doors must be hinged. You can use two loops for each of the doors, but it would be better to fix them on three.

The size of one bedside table is 400 by 400 by 820, and the second will have dimensions of 820 by 400 by 490 mm. You can choose not to do one of them, and this will not harm the overall design.

In order to assemble the first bedside table, you will need 2 identical side parts and a shelf that will serve as a mount for the entire structure below. The top part of the cabinet will taper, so the lid needs to be smaller than the main part. All these parts are fastened with self-tapping screws. If you wish, you can use dowels for furniture. Do not forget that you must first make holes with a drill and use glue at the same time.

From the shield it is also necessary to cut out the doors for the bedside table, they should be fixed with two hinges. The drawer needs skids. It is recommended to purchase them in special stores. But you can also make them yourself from plywood, but then the boxes will stretch, and this complicates the application.

The second cabinet is made very simply. You only need two side pieces and two shelves to help form the frame. Inside you can fill the cabinet with anything. All parts are fixed with self-tapping screws or dowels.

After all the processes performed, it is necessary to assemble the hallway. All parts must be fastened, and then prepare the boards. They should be beautifully arranged from one edge of the pencil case to the edges of the cabinet, thus creating the basis for the hanger. When attaching the boards, it is necessary to maintain the same step, when fixing the boards to the wrong side of the bedside tables. In order for the structure at the top to be more durable, the boards should be fastened with a rail. You need to place it at such a height that you can then attach hooks to the rail so that you can hang outerwear. If you wish, you can additionally make a shelf for hats.

Do not forget to cover the entire hallway with varnish, fasten the hooks and handles.

Sliding wardrobe how to do it yourself

Making a wardrobe is much easier than you might think at first. But it would be better to first decide on this value. Such a product as a sliding wardrobe suggests an interesting door design, because they move along the runners parallel to the body of the cabinet itself. It can be made both built-in and standing separately.

If you wish, the cabinet body can be made of plasterboard and hidden in a false wall. But let's look at the usual scheme for the production of a wardrobe, which has walls on the sides.

wardrobe model

The model we are going to look at measures 2020 by 625 by 2320 and has several main parts:

• the racks on the sides should have a height of 2288 by 625 mm (these calculations take into account the thickness of the sheet of the lower and upper strips, which is 32 mm);
• in addition, the upper and lower bars themselves can be considered large details: 202 by 625 mm;
• vertical racks in the middle are inextricably linked with a bar for things. Usually, it is fixed to a height of 1900 mm, so the standard dimensions for them are 525 mm wide and 1900 mm high. Those 10 cm that remained are necessary for the correct operation of the sliding door.

Filling the cabinet

You can fill the closet as you like. It all depends on what you want and prefer, but it is worth remembering that there must be room for the fastener system.

Any details would be better to order in carpentry workshops. After all, cutting out all the necessary elements at home does not always work out accurately and beautifully, even if you have such experience.

Assembling the wardrobe

Only after that you can start assembling the cabinet. For assembly, it is recommended to use not only dowels and screws, but also corners for furniture. The rails should be installed inside the cabinet in a special area, which should be separated in advance, that is, those 10 cm that you left during the preparation of the blanks. Now you can install the door and use the cabinet.

Entrance hall of the corner type with his own hands

The difficulty that arises during the manufacture of a corner-type hallway is that it is necessary to make careful and competent calculations, even a small mistake will cost you a large sheet of materials. Initially, you need to take measurements and check the walls. If the walls have an uneven surface, then you will have to make a common frame. Otherwise, the walls can become your base, and shelves can be attached to them. This option can be called more economical and simple, but we will consider a separate closet, since ideal and even walls in a house or apartment can be found very rarely.

Drawing selection

Initially, you should choose a drawing that is right for you, while you should rely on the area of ​​\u200b\u200bthe room, the length of the walls and their location in relation to the doorway. You should also think about equipping the closet inside.

Main elements

According to the dimensions you have chosen, it is necessary to manufacture 6 main body parts:

top and bottom slats;

walls back 2 pieces;

walls on the sides, of course, you can make a cabinet without them, but this will make it less functional.

Cabinet assembly

After you assemble the frame, you can start installing shelves inside it, as well as drawers and baskets and hang hooks and rods.

You can equip a corner-type hallway with roller doors, thus making a corner wardrobe. But ordinary hinged doors are also perfect.