Being carried away by the cultivation of domestic plants, most people sooner or later face the question of where it will be possible to place the exhibits of their collection without prejudice to the living space, when there is no longer enough space on the windowsills and on the shelves of the cabinets.
Thinking about how to solve the problem of economical use of space, many come to the conclusion that it is necessary to purchase multi-tiered plant shelves, hanging shelves or floor structures for house plants.
The easiest solution is to purchase a ready-made flower rack, hanging rope planters or hanging flower shelves on the walls. Such designs are sold in stores in a wide variety of types, styles and configurations.
In addition to buying, you can start looking for materials on how to make a flower stand yourself, using either improvised material for this purpose, or by visiting stores that sell the necessary materials required to assemble these structures.
Making a flower stand with your own hands is interesting because the item created during the work will be unique. A person working on its creation can decide for himself what shape, color, texture it will be - and not worry about the fact that somewhere in the world there is another, completely the same piece of furniture.
A beautifully made flower stand can be a highlight of the interior
It is known that with careful manufacture, a flower stand can become a real decoration of the interior, and not just an item that helps the owners of the room save space and place all their favorite plants in the room. Therefore, while building it, you need to be very careful, and not hope that the plants will completely hide the carelessness and negligence of the master.
Indoor plants make the house more beautiful and comfortable, clean it of carbon dioxide and saturate it with oxygen. Well, in order for indoor flowers to harmoniously fit into the interior of the house, it is important to place them correctly.
The problem is that sometimes there are not enough window sills for all the flowers, in addition, it is not always comfortable for green spaces on the window sills, because in sunny weather it can be too hot for them, and the aggressive sun, reflected from the glass, can damage the leaves, and in frost on the window they will be cold.
The ideal solution would be a flower stand. Moreover, well-chosen coasters themselves can decorate the room.
Stands for indoor plants are different in their structure, configuration, material of manufacture and colors. Based on these criteria, several types of stands are distinguished.
Floor stands for flowers are hinged shelves on a stable vertical support. Moreover, the stand frame can be both mobile and fixed. This product can combine several shelves at the same time.
Shelves-stands are a rectangular frame, reminiscent of a bookcase with open shelves. You can find modern models, the design of which has an oval or round shape.
Mobile stands are products of various shapes, consisting of 2 or more tiers with wheels that allow you to move flowers.
Unusual models are stands of unusual shapes and colors, for example, racks on which trailed parts and carved or concave supports are fixed, often such products are brightly painted. Unusual creative supplies can be seen in the photo of the flower stand.
The most common materials for creating a coaster are wood, metal, plastic, stone and glass.
Metal. Metal flower stands are the most popular, because due to their strength and stability they allow you to place the maximum number of flower pots.
In addition, if we are talking about a forged stand, then it is also very elegant and elegant.
Forged flower stands can be made in different stylistic directions.
Recently, manufacturers have been delighting flower growers with unusual forms of forged stands, for example, in the form of a medieval carriage, or an Egyptian pyramid, or a musical instrument.
Wood. Wooden flower stands are convenient, practical and inexpensive accessories for indoor plants.
Thanks to wooden supplies, you can not only decorate the interior, but also change the space by placing several flower pots in one zone, thereby focusing attention in the right direction.
Wooden products look great in the interior of Provence and in a minimalist style. More original analogues, for example, in the form of wooden steps, will harmoniously fit into the interior, made in a hi-tech or loft stylistic solution.
A stand made of natural wood will become stronger if it is supplemented with metal parts, which, among other things, will add elegance to the design.
Many people think about how to make a flower stand on their own. In order to make a stand with your own hands, you will need a wooden frame and wicker elements, such a stand is great for a rustic-style room.
Such a design solution as a glass flower stand looks quite interesting in the interior.
Glass flower stands can be of various shapes and colors, decorated with patterns, matte and transparent. This stand model is suitable for any style room.
Plastic is popular with florists due to its plasticity, because it can be used to make a product of any shape and size.
Therefore, as an accessory for flowers, you should look at plastic models, because both a low and a high flower stand will be equally beautiful and comfortable.
In addition, plastic coasters are usually sold at an affordable price.
Today, everything non-standard and made by hand is in fashion. Therefore, thousands of people around the world spend their free time decorating their home or yard with various crafts, including those made from improvised materials. Among the popular products of this kind are flower stands. Everyone can make them with their own hands.
To make such crafts, it is not at all necessary to spend money on the purchase of expensive materials. For example, ordinary paper towel sleeves may come up, from which, using PVA glue, you can fold a kind of "woodpile". Then such flower stands (it’s quite easy to make them with your own hands) must be painted with oil or acrylic paint. If desired, they can be decorated with bright yarn, which is used to intertwine "logs".
Eco-style lovers will surely like options that look as natural as possible and fit perfectly into such landscape design. For example, anyone can easily make wooden flower stands (floor) from a felled tree trunk. To do this, it is necessary to cut the branches with a grinder so that a cylinder 1-1.5 m long is obtained. Then it is necessary to step back from both ends by 20-25 cm and make deep cuts almost to the middle of the trunk diameter, and then hollow out the area between them to form a place where you can install small pots of flowers.
Another option is made again from a tree trunk, but the area where the branching occurs is taken. The lower part is sawn off so that a stable platform is obtained. In addition, from the thickest section of the log, discs 3-4 cm thick are cut out according to the number of branches. Each of them is fixed on one of them. Then the product can be painted, and if the trunk was unhewn, then left in this form. The result should be flower stands (floor), resembling something like a large and massive candlestick.
Great idea to breathe new life into an old chair. In order to make such wooden flower stands, you need:
At the same time, the older and more vintage the chair is, the more stylish the stand will turn out to be.
The second version of such a craft is made even simpler: a round hole is cut out in the seat, 3-4 cm in diameter less than the diameter of the flower pot, which is then inserted there and, if necessary, fixed with a small amount of mounting foam. By the way, if you are going to make such flower stands, floor, low options are best created from highchairs or stools.
Very stylish products can be obtained from what millions of people throw into the trash every day. So, magnificent do-it-yourself flower stands can be made from plastic bottles.
You will need:
Do-it-yourself flower stands from plastic bottles, which look like beautifully decorated bronze compositions, are made in the following order:
According to the same scheme, a large flower stand can be made. A high base for it will turn out if you take more bottles. For example, you can add another "floor" of four bottles, connected according to the principle of the bottom of the previous design.
Such crafts can be made from almost anything. For example, you can simply remove a car tire from a metal rim and hang it on the wall. Then, small pots with lush hanging plants are inserted into the lower part of the tire.
Wall flower stands can also be created from scraps of aluminum or plastic pipes with a diameter of at least 10-15 cm. They must be cut so that 4-5 pieces of the same length are obtained. Then, stepping back from the edges by 3-4 cm, they cut out the upper part of the pipe to get something like a trough, into which they fill the ground and plant flowers. So that such a wall-mounted flower stand can be hung, they take a metal rail with a length equal to the length of the "trough" pipes and tie two strong ropes to it at a distance of 2 cm from the ends, so that 2 ends hang down on both sides. Then they make a pair of holes on the pipes, stepping back the same distance from the cuts. Ropes are threaded into them and fixed so that the coasters do not move.
The principle of the previous craft can be used in another way. So, you can take a wooden board and cut out 3 squares of the same size from it. In the center of each, you need to cut a circle with a diameter 4 cm less than the diameter of the upper part of the pots that are going to be hung, and make one hole in the corners. Next, 4 ropes of the same length are taken. Each of them is designed for one of the corners of the stand. On the first rope, stepping back from the end by 10-15 cm, a knot is tied. They thread it from below into the hole of the lower “floor” of the product and tie the next knot at a distance approximately equal to the height of the pot, multiplied by 2. Thread the rope again from below, into the hole of the next “floor”, and repeat these steps until all the “floors” are put on a rope. Do the same with the other three ropes. All four ends of the ropes are tied at the top of the stand into a knot, by which it can be hung on a hook built into the ceiling.
Such do-it-yourself flower stands can be three-, four- and even five-story. However, you should not get carried away either, because if the pots are large enough, the design will turn out to be quite heavy.
As already mentioned, such products can be made from a variety of materials. In particular, for the exterior decoration of buildings and for landscape design, metal is an excellent choice. True, only a few can independently make forged flower stands, which are very beautiful and durable. In addition, they can easily fit into any interior. Among the interesting options are wall-mounted flower stands (metal) in the form of tree branches.
As for simpler products, everyone can make their own, for example, a frame with a canopy in the form of a lattice, to which a wooden box is attached, where flower pots are placed.
Flower stands (metal) can also be made from rebar with a diameter of 3-8 mm. It needs to be red-hot over an open flame, and then slowly cooled. After that, the reinforcement is bent with the help of a bench vise, scraps of metal pipes of various diameters and a hammer. Then you need to arm yourself with a welding machine and fasten the parts in the right places. After that, these areas must be treated with a grinder to remove scale and excess leaking metal.
In this way, floor, wall or hanging flower stands can be made. If you want to get a product in vintage style, you need to cover the finished structure with two layers of paint: black, and when it dries, bronze. Immediately after this, you need to wipe the surface of the stand with a rag so that the “bronze” that has not yet dried up in places has come off, and a black bottom layer has appeared from under it. Thus, the product will look as if the bronze has turned black from time to time.
Glass aquariums always look very attractive. But what if you use such vessels to make flower stands with your own hands? True, this option is only suitable for flowers that do not need a lot of moisture, which in nature grow only in deserts. For example, in an old round aquarium, you can cut a couple of small holes, fill the bottom with sand and bury a small plastic bowl into it, in which a dwarf variety of aloe is planted.
Now you know what flower stands you can make with your own hands for your home or garden, and you can decorate your home with them.
Many lovers of indoor plants sooner or later ask themselves the question: how to place all the flora in the house?
You can solve this problem quite effectively by using various flower stands in your interior.
Whether to buy a ready-made stand and how to choose, or whether to order according to an individual design or make it yourself - depends on your desires and capabilities. Even more recommendations are presented on the website http://clubsamodelok.ru
Flower growers are well aware that plants need certain conditions in order for them to please with their juicy greenery or beautiful flowers. Some plants require more light, others less.
Properly selected flower stand simultaneously solves several problems:
Stands are floor and suspended (wall). Both of them are distinguished by a variety of designs and materials.
Floor stands for flowers can be either for one plant or for several. On single ones, as a rule, they have large flowers - palm trees, ficuses, hibiscus, etc.
The cache-pot of such plants is quite voluminous and heavy, therefore the stand under it must be quite strong - wooden or metal.
On racks for a group of plants - light-loving flowers are placed at the top, under them - preferring partial shade. Such stands are the most popular, as they have the following advantages:
Especially effectively the issue of compactness is solved by high flower stands. There are such vertical structures that are fixed to the floor and ceiling for greater stability.
Straight high stands also look original for one plant, which in this case receives the maximum amount of light, since it is located at the level of the window.
You can decorate the empty part of the wall with the help of plants. To do this, you need a stand or shelf that is attached to the wall. There is a huge variety of such designs, for every taste and budget.
By the way, you can make a hanging flower stand with your own hands. You will need wooden planks and a thick rope. Drill large holes in each board for the pots and small holes in each corner for the rope. Install the shelves by threading the rope through the holes and securing it to the knots.
Such a design using natural materials will perfectly fit into the interior of a country or country summer house. And if you paint the shelves in bright colors, then you can use it in the nursery.
Advice! In wall or hanging flower stands, it is better to place ampelous plants hanging down.
The variety of materials from which flower stands are made is striking in its quantity. The simplest and most budget option is plastic, sometimes using metal hollow tubes.
Such flower stands are conveniently placed on the balcony or loggia, in the kitchen. Made in white, they look light and airy, without overloading the interior.
Their plus is that the plastic does not deteriorate in the open air, there is no need to tint.
Wooden flower stands are also popular. As a rule, they are shelves, racks or whatnots. Both floor and wall stands are made of wood.
One of their advantages is that you can always repaint in the desired color when updating the interior. Wooden structures will perfectly harmonize with the furniture in the living room or bedroom.
They are also suitable for plants on the loggia. Often they place wooden or plastic flower stands on the windowsill when the hostess has a lot, for example, violets or cyclamens that require the same amount of light.
Perhaps the most chic and sophisticated option is forged coasters. There is no limit to fantasy, and blacksmiths sometimes offer simply masterpieces: butterflies on the wall, cats on the floor, as well as scorpions, bicycles, etc.
A forged flower stand can be made in a classic style, in a Provencal style, and in some exotic style - oriental, Japanese, etc.
The most important positive features of forged products are strength, stability and durability.
Shelves made of glass and metal look beautiful. The metal base can be forged. But there are options for glass coasters on chrome tubes. Such flower stands are applicable in modern interiors.
Colorful wicker coasters will perfectly fit into the premises of ethnic style, eco or country.
Looking at numerous photos of flower stands, various in shape, color, design and material, you understand how interesting this interior detail can be.
In addition to performing their main function, flower stands attract attention with their originality and beauty.
Living plants in the house are a wonderful decoration, which can be complemented by a metal floor flower stand. Together they are able to make the room more comfortable and improve the atmosphere of the house. As for flowers, some of them are of great benefit. They can help with various diseases, as well as purify the air. The latter is very important for children's rooms, so their interiors are often complemented with pots of houseplants.
Most often, flowers in apartments live on window sills. However, this is not always a good option. Firstly, not all indoor flowers tolerate a large amount of sun, and secondly, some specimens really do not want to be hidden from prying eyes behind curtains.
And here such a simple but useful solution will come to the rescue, like buying a flower stand. They can be made from a variety of materials, but the most sophisticated options are made from metal. Such coasters are successful elements of decor and they can be placed on the floor or hung from the ceiling.
Floor metal flower stands will not look like an ordinary item that simply takes up space in the room. Nowadays, designers offer such a variety of options that even the most demanding buyer will choose the right option for himself.
In modern stores, you can buy metal flower stands inexpensively, and these are designs in the form of high or low stools, openwork whatnots, forged ladders, pyramids. It all depends on the manufacturer, or rather, his imagination. And having certain skills and special tools, you can make a metal flower stand yourself.
kayabaparts.ru - Entrance hall, kitchen, living room. Garden. Chairs. Bedroom