Why slime does not work at home. How to make a slime at home: the easiest and safest ways

Playing with a slime is an entertainment that many children like. Making it at home is not difficult, besides, you will need very few materials. You just need to know the slime recipe. All the ways to make a slime, further.

How to make slime from sodium tetraborate (Bora) and glue

From sodium tetraborate, an interesting slime is obtained, which is similar in consistency to the original sold in children's goods stores.

materials

To make such a slime, prepare:

• boron - 0.5 tsp;
• transparent clerical glue - 30 g;
• food coloring yellow and green;
• water.

Step 1. Take any two containers. The slime mixture will need to be prepared in two parts. Pour a cup of warm water and half a teaspoon of boron into the first container. Stir this solution thoroughly until the powder is completely dissolved.

Step 2. In a second container, mix half a cup of water, glue, 5 drops of yellow and 2 drops of green dye. Thoroughly mix all the ingredients to a single consistency.

Step 3. Carefully pour the boron solution into the second container. You will see how the mixture begins to turn into a viscous mass before your eyes. She can already play. This is the slime. Make sure that the child does not take such a slime in his mouth.

Be sure to store the slime in a closed container.

How to make slime from glue and starch

materials

To make slime you will need:

• liquid starch;
• PVA glue;
• small tight package;
• food coloring.

The dye must be taken food. If a small child will play with the slime, prefer natural dyes to food. If you do not have dyes, you can add gouache to the mixture.

Pay attention to PVA glue, in order for the slime to turn out, you need glue made recently. Glue must be white.

Step 1. Pour 70 ml of liquid starch into the bag. It is different from food and is used when washing clothes. In the absence of such, you can take the usual one, but it must first be diluted with water in a ratio of 1: 2.

Step 2. Add a few drops of dye to the bag. You don’t need to add a lot of dye, otherwise the slime will paint your hands during the game.

Step 3. Then pour 25 ml of PVA glue into the bag, after shaking the bottle well.

Step 4. Close the bag tightly or tie it up. Mix the contents thoroughly. This must be done until the main mass turns into a clot. In addition to it, there will be some liquid in the package.

Step 5. The liquid must be drained. The clot itself is the slime. Blot it with a napkin, removing excess moisture from the surface. Now they can play.

If your slime sticks to your hands, remake it with less glue or more starch. If the slime, on the contrary, is too hard or crumbles, then you have added more starch than necessary.

Slime prepared in this way will be suitable for games within a week. It must be stored in a sealed container or jar so that dust does not get on it.

Do not forget to wash your child's hands after playing and do not let him taste the slime.

How to make a soda slime

Lizun from soda due to the content of dishwashing liquid, it is recommended to give children under adult supervision. After playing with such a slime, you should definitely wash your hands.

materials

• Dishwashing liquid;
• soda;
• water;
• dyes as desired.

Step 1. Pour dishwashing liquid into the container. There is no specific dosage, gradually mixing the rest of the components, you can simply pour in dishwashing liquid or water to thin the mucus.

Step 2. Pour soda into the container, mix everything thoroughly. Your mixture should look something like the photo. For a slime, such a mixture is thick, and therefore dilute it a little with water and mix everything thoroughly again.

The final color of the slime will be the same as in the photo. You can change it up a bit by adding a few drops of dye.

Slime from soda is ready.

How to make slime from shampoo

This is a very simple way to make a slime, it turns out to be the right consistency, but you need to store it in the refrigerator between games. This slime, like many others, should never be taken into the mouth, and hands should be thoroughly washed after playing with it.

materials

• shampoo;
• dishwashing liquid or shower gel.

Step 1. Take a container and mix shampoo and dish liquid or shower gel in it in equal proportions. Please note that the gel and liquid should not contain any granules, and if you want the slime to remain transparent, the components must be of the same quality.

Step 2. Mix the ingredients thoroughly and put them in containers in the refrigerator. The very next day you can use the slime for games. Later store it in the refrigerator in a closed container. When a lot of garbage sticks to the slime, you can throw it away, it will begin to lose its properties.

The maximum shelf life of such slime is 1 month.

Washing powder slime

To make this slime, you will need not an ordinary dry washing powder, but its liquid counterpart. It is the powder that needs to be used, since liquid soap, gel, etc., have a completely different consistency and, in combination with the elements of this recipe, it will not work to make a slime out of them.

materials

So, before starting work, prepare:

• liquid washing powder;
• PVA glue;
• food coloring;
• thin rubber gloves;
• container.

Step 1. Pour a quarter cup of PVA glue into an empty container. You can take it more or less, it all depends on the desired size of the slime.

Step 2. Add a few drops of food coloring to the glue, mix this solution thoroughly until a uniform shade.

Step 3. Pour 2 tablespoons of liquid powder into the solution. Thoroughly mix the entire solution. Gradually, it will become sticky, and the consistency will resemble putty. If your solution is too thick, add liquid powder to it drop by drop, diluting the solution.

Step 4. Put on gloves, remove the mixture from the container and carefully, like dough, begin to knead the workpiece. Extra drops of powder should come out of this solution, if any, it will begin to resemble a soft gum in consistency.

Slime must be stored in a closed container. If it starts to lose its properties, send it to the refrigerator for several hours.

How to make slime from flour

A relatively safe slime for children is made from flour. Even small children can play like this, especially if natural ones are used instead of food colors. With natural dyes, the color of the slime will not be as intense.

materials

To make slime, prepare:

• flour;
• hot water;
• cold water;
• dyes;
• apron.

Step 1. Pour two cups of flour into a container. Pass it through a sieve so that the mass is homogeneous and easier to prepare.

Step 2. Pour a quarter cup of cold water into a bowl of flour.

Step 3. Then pour in a quarter cup of hot water, but not boiling water.

Step 4. Stir the entire mixture thoroughly. Be sure to make sure that the consistency is homogeneous, without lumps. It is very important.

Step 5. Add a few drops of food or natural coloring. If food coloring, add a couple of drops. Stir the whole mixture thoroughly again. It must be sticky.

Step 6. Place the slime container in the refrigerator for several hours. After the mixture has cooled, it can be used for its intended purpose.

How to make a magnetic slime

The original magnetic slime that can glow in the dark can also be made at home.

materials

• Bora;
• water;
• glue;
• iron oxide;
• Neodymium magnets.

Step 1. In a container, mix one glass of water and half a teaspoon of boron. Mix everything thoroughly so that the boron is completely dissolved in water. This mixture will be needed to activate the second half of the composition.

Step 2. In the second container, mix half a glass of water and 30 grams of glue. Mix thoroughly and add paint. Here you can add phosphor paint if you want the slime to glow in the dark.

Step 3. Carefully pour the boron solution into the glue mixture. You need to add the solution gradually, constantly stirring the mixture of glue. Once the mixture begins to harden and reaches the desired consistency, stop adding the boron solution. You can pour out the rest.

Step 4. Take the already prepared slime and level it on a flat surface. Sprinkle some iron oxide in the middle of the slime. Stir the slime thoroughly until it acquires a uniform gray color.

The magnetic slime is ready. When interacting with a magnet, the slime will reach for it.

If the slime doesn't work

It often happens that the slime does not work. It depends on the quality of the source material, and therefore not all the proportions indicated in these recipes may be correct. In this case, you need to experiment with consistency.

The correct slime should be taken out of the container as a single mass. In some places it may be heterogeneous, but after two minutes of active kneading, it becomes viscous, moderately sticky and homogeneous.

If the slime is too sticky, it will be noticeable by the threads trailing behind the spoon. When touched by the fingers, the mixture sticks too much to the fingers and does not come off easily. In this case, you need to thin the mixture a little, for example, by adding liquid starch or just water. It all depends on the recipe you choose.

If the slime stretches, but does not stick to the hands, but slides off them, then there is a lot of liquid. In this case, excess powder solution, starch or water must be drained, perhaps a little glue, boron solution, flour or other binding material should be added. Again, mix well.

Handgam ("hand chewing gum"), slime or a more common version of the name of the toy - slime is adored by children of all ages. Although the fashion for it began a long time ago, but even today it does not pass, its popularity is only increasing. The jelly-like colored substance, according to doctors, helps to calm down, improves neurohumoral processes in the child's body, develops motor skills of the hands and opens up the creative talents of young talents. In order not to buy a ready-made toy with an incomprehensible composition, caring parents are considering options on how to make a slime on their own. A few simple “recipes” for cooking are in our article.

The most common option, which looks exactly like the popular toys on the shelves of children's stores, is a slime with sodium boric acid (also called borax or sodium tetraborate).

To make it, in addition to ½ teaspoon of the main component, the following components are needed:

• 30 grams of stationery glue, preferably transparent;
• one and a half glasses of water;
• dyes of different colors (food safer);
• two small containers.

Step by step preparation:

1. In the first container, pour 1 glass of water with a temperature of 30 - 36 degrees, add a measured dose of borax, mix thoroughly until it becomes homogeneous.
2. The second vessel must be filled with the remaining water (0.5 cups) and glue, add 2 - 4 drops of dyes (it is better to choose two or three colors, no more). Mix until smooth.
3. Take the first container in your hands and, slowly tilting, pour the mixture with tetraborate in a thin stream into the second container.

The transformation will take place right before our eyes: from the liquid state, all the components will pass into one whole viscous substance. Such a slime is ready for various experiments that children love to do so much.

Only parents should be careful that the child does not put the slime in his mouth. After all, the toy, although made at home, has a chemical composition.

From water and starch

For those who are looking for a recipe with safer ingredients, a handgam version without sodium tetraborate is suitable. There are several types of cooking "hand chewing gum".

Materials for the first method:

• potato starch - 200 g;
• half a glass of warm water;
• ½ teaspoon food coloring;
• enamel container.

How to do:

1. Pour starch and dye into a bowl, mix them.
2. Gradually add water to the mixture, while constantly stirring the contents.
3. The liquid will change consistency gradually during stirring: from light jelly to elastic jelly.

Since there are no chemicals in such a slime, the toy also does not “live” for long. After two days, it will become unusable and you will have to make a new slime.

For the second starch slime recipe, you need to take:

• liquid starch, which is bought for washing, - 70 ml;
• white PVA glue - 25 ml;
• natural dye (you can use gouache paints);
• high density plastic bag.

How to make slime:

1. Pour the starch into the bag.
2. Add 3 - 4 drops of dye, no more, so that during the game the paint is not on the hands of the child.
3. Pour glue into the mixture, tie the bag.
4. Shake it vigorously, mixing the contents, until a large clot appears among a small amount of liquid.
5. Drain the liquid, remove the viscous mass, blot it with a paper towel. Slime is ready!

Such a handmade creation is suitable for playing for 7 - 10 days if stored in a closed container.

Toothpaste technology

This method allows you to make a particularly dense and viscous slime, and also relatively safe.

Required Ingredients:

• gel toothpaste - 1 tube;
• monophonic dye - 2 - 4 drops;
• sunflower oil - 10 g;
• a small dish.

Cooking steps:

1. Squeeze the contents of the tube into a container.
2. Add paint to the paste, mix so that there are no lumps.
3. Put the pot on a small fire. Stir the contents for 10-15 minutes. The excess liquid for the toy evaporates, the remaining substance hardens.
4. Remove from fire, let cool.
5. With oiled hands, the resulting lump must be thoroughly kneaded.

Shaving foam slime

This cooking method is especially popular with children, because the result is a dazzling white handgum.

Of course, fathers are not too happy about such a waste of their razor stocks, but the end justifies the means.

For slime you need to take:

• sodium tetraborate - 17.5 ml (3.5 teaspoons);
• shaving foam - 50 ml;
• PVA glue - 30 ml;
• warm water - 100 ml;
• 2 enameled bowls.

Cooking process:

1. In the first bowl, mix borax powder (one and a half teaspoons) and water (50 ml) until a homogeneous mass is obtained.
2. Add glue and shaving foam, mix thoroughly.
3. In the second vessel, dissolve 2 teaspoons of tetraborate in 50 ml of water until a homogeneous substance is obtained.
4. Slowly pour the solution from the second bowl into the first. Mix until the lump stops sticking to your hands.

From shampoo and salt

When using this method, the handgum turns out to be not too dense, a little watery. But such a recipe also has a right to exist.

For him you need to take:

• any shampoo - 4 - 5 tablespoons;
• non-iodized salt - 2 - 5 tablespoons (depending on the result).
• capacity.

The cooking method is very simple:

1. Place the shampoo in a bowl.
2. Gradually pour salt into it, stirring constantly.
3. When the mass thickens, the toy is ready.

Another method of making slime from shampoo requires dishwashing liquid. It is necessary to take 150 ml of both components. For a transparent slime, it is worth choosing the appropriate materials - without color.

Cooking steps:

1. Mix ingredients in a bowl until smooth.
2. Put the container with the contents in the refrigerator.
3. Hold for 45 minutes - 1 hour, remove the finished slime.

Such a toy should be stored at lower temperatures so as not to lose its ductile properties. Therefore, after the game, it is better to immediately send the slime to the refrigerator. Then they can play for a month - one and a half.

Flour step by step instructions

Even the smallest fidgets can use safe handgam in their games. It is easy to make it, and how much joy such a toy brings to kids cannot be expressed in words!

Slime Ingredients:

• flour - 2 cups;
• water - 0.25 cups cold and hot;
• coloring substances.

How to do:

1. Sift the flour through a sieve into a small bowl.
2. Add cold water, followed by hot. In no case should you use boiling water, otherwise the slime will not work.
3. Mix all the ingredients until smooth, carefully check the absence of lumps.
4. Add 2 - 4 drops of dyes, mix. It is better to use natural additives to give color from vegetable or fruit juices.
5. Put the bowl in a cold place (outdoors in winter or in the refrigerator), leave for 3-4 hours.
6. The cooled mass must be removed, kneaded in the hands - and it is ready for use.

How to make slime with PVA glue

Most of the recipes for this popular toy have PVA glue as the main ingredient. It has the right consistency, color, and also connects all the other components of the slime together.

I would like to highlight one particularly interesting way - a magical slime. Such a toy will be attracted to a magnet, and with the help of special ingredients it will even glow in the dark.

For it you need to have:

• sodium tetraborate - 0.5 teaspoon;
• PVA glue - 30 g;
• water - 400 ml;
• food colorings;
• phosphoric paint - 2 g;
• iron oxide, you can take a laser printer developer - 2 g.

Cooking steps:

1. Pour borax powder into a container, add 200 ml of cold water, mix so that no lumps remain.
2. In the second vessel, dilute the PVA glue with 200 ml of the remaining water to a homogeneous solution.
3. Add dyes, phosphor paint to the adhesive solution, mix.
4. Slowly pour the contents of the first container into the second container, stirring regularly.
5. It is not necessary to add the entire tetraborate solution, you should watch the consistency of the resulting mass. If it is normal, you must stop connecting the components.
6. Add iron oxide to the resulting mixture, mix.

Magic slime is ready. Children are delighted to watch how the toy is attracted to a magnet, and at night it glows in the dark like a firefly.

Plasticine toy

You can make another slime without glue, based on the material that children always have in abundance. Plasticine handgams are easy to prepare and relatively safe.

For them you need to have:

• 100 grams of plasticine - can be of the same color or different;
• 15 g of edible gelatin;
• 200 ml cold and 50 ml hot water;
• an iron bowl or other metal vessel;
• plastic container.

How to do:

1. Soak gelatin in a metal container in a glass of water at room temperature.
2. After an hour - one and a half, put the dishes on a weak gas, stirring, bring its contents to a boil and remove.
3. Knead the plasticine with your hands so that it becomes pliable and warm.
4. Put the soft mass in a plastic container, pour 50 ml of hot water, mix, trying to make the composition as homogeneous as possible.
5. Add already slightly cooled gelatin to the plasticine substance, mix thoroughly, leaving no clots.

Place the mass in the refrigerator for 30 - 45 minutes.
Such a slime can serve its owner for a long time.

What is necessary:

• actually, the pencil itself - 4 pieces;
• favorite component tetraborate - 5 mg (1 teaspoon);
• water - 100 ml;
• dyes;
• two containers.

Cooking steps:

1. Remove the rods (adhesive substance) from the plastic case of the pencil, put them in a glass bowl.
2. Put the container with the contents in the microwave. The time range depends on the process of turning the mass into a more viscous one.
3. Add food or natural dyes, gouache (2-3 drops each) to the resulting mixture, mix.
4. In another container, make a solution of borax powder with water.
5. Carefully combine both mixtures, vigorously mixing the contents.
6. Before that time, it is necessary to pour the tetraborate solution into the glue until the composition of the desired consistency is obtained.

DIY transparent slime

Slime, similar to a crystal pebble, is not as easy to prepare as the previous versions of a variety of "hand chewing gums". But such a toy will become the pride of every child and the envy of friends and classmates.

This will require:

• polyvinyl alcohol (water-soluble polymer) - 100 ml;
• sodium tetraborate - 25 g;
• plastic utensils.

How to cook:

1. Pour alcohol into the container.
2. Add borax powder to it and quickly begin to mix the ingredients.
3. It is necessary to continuously stir the liquid for 10 - 15 minutes to achieve the desired effect. She gradually thickens.

The result is a glass dazzling slime.

It is not worth playing with it too often, because the created toy has a fairly high level of toxicity.

Such an extensive list of different cooking methods allows parents, along with their children, to make slime at home from improvised materials.

You can add additional components to the recipes provided: sequins, foam balls, beads, mother of pearl ... Fantasy will help you create new interesting options for your favorite toy. Also, to remove the characteristic smell of glue, it is worth using aromatic additives or essential oils.

In order for the slime to please children longer, you need to remember the rules for its use and storage:

• Wash your hands thoroughly after playing.
• it is necessary to store the slime in an airtight container with a lid - a glass jar, a plastic bag, a plastic container;
• do not put the toy near heating appliances, under the direct rays of the sun;
• dried handgam must be put in water for a short time, it will again be suitable;
• we must try so that the slime does not fall on the carpet or other surfaces with pile - so it quickly becomes unusable;
• colored "hand chewing gum" leaves stains on clothes that are difficult to remove - you should be careful during the game.

By following these simple rules, you can keep the slime in a playable condition for a long time. This toy will definitely become one of the favorites of any child.

The name of the popular toy was the hero of the famous cartoon about ghost hunters - Lizun. This amorphous, jelly-like creature is loved by children, so the toy remains popular. In addition to entertainment, handgam also benefits the child by developing it.

Characteristics of the toy

A popular toy has acquired the name of a handgam. It can be crushed, twisted, deformed, tossed. Slime can return to its original shape, stick to surfaces, peel off from them.

The jelly-like, but not melting consistency of the toy helps the development of fine motor skills of the child's hands.

Handgam exercises help relieve stress by calming the nervous system. The toy can be found in the store, but many parents are concerned about the composition of the material from which the slime is made.

Therefore, most people prefer to make their own handgam from safe materials. Moreover, the process is not particularly difficult, and the costs are minimal. There are many materials for creating slime at home:

• water with flour;
• PVA glue;
• shampoo;
• toothpaste;
• shaving foam;
• paper;
• soda;
• starch;
• plasticine.

This exciting activity will occupy the child and divert the adult's attention from worries. But it is better not to give such a toy to children under 5 years old, as they may try to pull it into their mouths.

In addition to the main components, when creating a slime at home, you will need to prepare containers for mixing the bulk. You will need stirring sticks, rubber gloves, a plastic bag.

Making a homemade slime is a creative process. Instead of food coloring, gouache is suitable. In stores with goods for creativity, you can find pearl paints, fluorescent, with sparkles.

Aromatic oils give a pleasant smell to the toy, adding a couple of drops is enough. To bring the toy as close as possible to its prototype, add a few drops of glycerin.

Handgum will become slippery. If you want to give airiness to the mass, you can add hydrogen peroxide. Each time you can create a completely different slime, which the child will be very happy about.

Making a Water Slime

This toy is very similar to the store version of the slime. To make it not too liquid, you can use more glue. So, below is a detailed description of the process of how to make slime from water at home. Components:

• PVA glue - 100 g;
• warm water - 50 ml;
• sodium tetraborate (4% solution) - 1 vial / 100g of glue;
• food coloring, you can gouache or brilliant green.

Adhesive must have a valid expiration date. Sodium tetraborate can be found in a pharmacy or in a chemical reagents, radio goods store. A quarter cup of water at room temperature is poured into a prepared container to create a slime, PVA glue is added.

If the mixture turns out to be a little watery, then the amount of glue needs to be increased. After thorough mixing, sodium tetraborate is added to the mixture. If it is in powder, then its aqueous solution is made - 1 tbsp. l. powder in half a glass of water.

But you should not increase the portion of sodium tetraborate, as the mass can become hard, lose plasticity.

After that, the solution is poured into the container. It remains to add the dye. The mixture is poured from the container into a cellophane bag, well kneaded. The toy has a chemical composition, so after playing with such a slime, you should wash your hands.

How to make slime with PVA glue

To make a slime from PVA glue, you will need a minimum set of ingredients:

• PVA glue - 3 parts;
• shampoo - 1 part;
• food coloring (you can gouache) - a pinch.

All components must be mixed, placed in a bag of polyethylene. It is necessary to mix until a uniform mucus is obtained.

The quality of the glue directly affects the result. It should be fresh, it is desirable to choose a transparent glue. Construction adhesive "Titan" of a high degree of viscosity is in demand.

It does not contain toxic substances. The elasticity of the slime depends on the amount of glue. Increasing the amount of glue increases the elasticity property. The shampoo will give the toy a pleasant aroma, and to get your favorite color, you can use gouache or brilliant green.

Making a slime without glue

The method is the simplest. All you need is a tube of toothpaste. The paste is placed in the microwave for a couple of minutes, then taken out, crushed and put back in the oven.

After repeating the procedure three times, the paste is cooled. Then it is kneaded with oiled hands. Slime is ready.

Slime without the use of sodium tetraborate

Slime can be created without sodium tetraborate if it is not available. The toy will turn out no less bright and interesting. The only drawback is the short service life, only 2 days. Required Components:

• PVA glue -100 ml;
• baking soda - half a glass;
• water - 50 ml;
• any color food coloring.

A small amount of water (15 ml) is mixed with the adhesive to liquefy it. Then the dye is added until the particles are completely dissolved. Now you need to make a slurry of soda and water. Baking soda should be kept on hand as it usually has to be added.

It remains to mix both masses until completely homogeneous. You can place it in a plastic bag and shake it to achieve the desired uniformity. After all the work done, you can use the resulting slime.

If it seems watery, you need to mix it again until the desired density is obtained. If necessary, increase the content of soda and glue.

The toy should be stored in a closed container, as it will become less and less effective day by day.

Perhydrol toy

You can apply another recipe that makes the slime more elastic. The future lizun resembles a bouncing ball. To create it, you need a set of components:

Starch is diluted with water and mixed. Glue is added to the mixture while continuing to stir.

Then pour a teaspoon of perhydrol, add the dye and mix again until the mass is completely homogeneous.

DIY shampoo slime

For lovers of cleanliness during the creative process, there is a simple recipe for making shampoo handgam. You only need a couple of components:

• 50 g of any shampoo;
• 50 g dishwashing detergent.

Both components are thoroughly mixed, after which they are removed for one day in the refrigerator. You can play the next day.

At the end of the games, the slime should be put in the refrigerator. If a lot of dust and dirt has stuck to it, then it is better to get rid of it and make a new one.

If you need a transparent handgam, then you need to take care of the transparency of the selected components.

How to make a slime out of toothpaste

This is one way to create a slime with glue. You only need two components:

• PVA glue - 1 tbsp. l.;
• toothpaste - half a tube.

A homogeneous mass is created, after which it is placed in the refrigerator for 15 minutes. You can add more glue to achieve the desired consistency. Such a product becomes a slime at room temperature, and when cold, it is an anti-stress toy.

Other ways to make slime at home

Made from polyvinyl alcohol

Required Components:

• polyvinyl alcohol powder;
• a couple of st. l. borax solution;
• glass of water;
• food coloring.

You will need iron utensils. Having determined the required amount of polyvinyl alcohol powder from the package, you need to boil it for 40–50 minutes.

It is necessary to stir constantly. Borax is dissolved in water. If there is a ready-made solution, then you need to take several vials.

After that, both solutions are mixed, combining 3 parts of alcohol with 1 part of sodium borate.

In the process, it will be possible to observe the transformation of the mixture into mucus. To give a pleasant smell, essential oil is added, you can tint by adding food coloring.

Plasticine handgam

A simple and bright plasticine slime is made from the following components:

• 1 pack of gelatin;
• plasticine - 1 piece;
• water - 50 ml and more to dissolve the gelatin.

Gelatin is dissolved in cold water according to the instructions on the package. After waiting an hour, completely dissolved gelatin is placed on the stove until it boils, then left to cool.

Plasticine thoroughly kneaded by hands is added to warm water, trying to stir until a homogeneous mass is obtained. Cooled gelatin is added to the resulting mass. After mixing and cooling, handgam can be used for games.

From starch

This is one of the methods for making toys in the absence of sodium tetraborate. It is necessary to prepare two ingredients in equal proportions:

• starch;
• water.

The components are mixed, a dye is added to them. It can be brilliant green, gouache, food pigment. The mass is formed into a ball and used for the game.

Making a slime from starch and glue

To create a toy, you need a simple set of ingredients:

• liquid starch (for washing clothes) - 70 ml;
• PVA glue - 25 ml;
• food coloring;
• polyethylene bag.

Starch is taken and added to the bag. It is better to use liquid starch or simply dilute with food water in a 1: 2 ratio. Dye is added to it, just a couple of drops. Excess dye will make the toy stain the hand.

After thorough shaking, PVA glue is added to the mixture. The contents are mixed well again. The released moisture can be drained.

After all the manipulations, the finished slime is removed from the package and blotted with a napkin. The quality of the toy will depend on the proportions of the components introduced.

If you use more glue, the toy will become too sticky.

More starch will give the slime extra hardness. You need to store handgam in the refrigerator, about 5-7 days. To avoid dust settling, the toy should be stored in a tightly closed container or bag.

slime for baby

The safest handgam for a very young child can be made from flour. Natural dye is used, so you can not be afraid that the child will pull the toy into his mouth. Flour slime has a very short shelf life, but making a new one will be easy.

Ingredients to prepare:

• wheat flour - 400 g;
• cold and hot water - 50 ml each;
• dye (onion peel, beetroot juice).

Sift the flour into a bowl, pour cold and hot (but not boiling water) water in turn. After mixing, it remains to add only coloring vegetable juice.

It is necessary to cool for 4 hours in the refrigerator.

At home, it is easy to create a slime from the components available in the house. This recipe consists of equal proportions of the following components:

Instead of alcohol, you can take vodka, but it will need one and a half times more than glue. The ingredients are mixed, a dye is added.

The resulting homogeneous mass should resemble wallpaper paste. Now you need to take it with your hands and hold it under running cold water.

This will lead to solidification of the mass. Slime is ready.

The simplest handgam

To work, you need only two main ingredients: water and starch. The components are mixed in equal proportions.

To give greater hardness, more starch should be used. To make the toy beautiful, you can add dye. Such a slime tends to stick to surfaces, but does not jump.

A toy can be created using just two components in equal proportions:

• shampoo;
• liquid soap (the color should match the shade of the shampoo).

After mixing the components, a homogeneous mass in a tightly closed container is placed in a refrigerator. If handgam is handled carefully, then its shelf life can reach a month. To do this, you need to protect it from dust, debris, and after the game put it in the refrigerator.

From sodium tetraborate and clerical glue

The drill used in the composition makes the toy similar to the store version. Compound:

• half a teaspoon of borax;
• 30 g of transparent stationery glue;
• food coloring green and yellow;
• one and a half glasses of water.

You will need two containers. In one, you need to dissolve sodium tetraborate powder well in a glass of water. The second container is filled with half a glass of water, glue, two drops of green dye and 5 drops of yellow.

A solution of sodium tetraborate is poured into the mixed homogeneous mass from the first container. This should be done slowly, constantly mixing the resulting mass.

Gradually, the properties of the resulting mixture will reach the desired condition, and the slime will be ready for use. You should watch the child so that he does not take the toy in his mouth.

From soda

To create a slime, you need very few components:

• soda;
• liquid dishwashing detergent;
• water;
• dyes.

In accordance with the required amount of slime, the container is filled with dishwashing liquid. Soda is added to it, mixed thoroughly.

If the mass seems thick, you can add a little water to dilute and mix.

You can also vary the amount of detergent to achieve the desired consistency. Dyes are added to change the color.

From washing powder

To create such a slime you will need:

• liquid laundry detergent - 2 tbsp. l.;
• PVA glue - a quarter of a glass;
• dye.

The glue is poured into the prepared container, then you need to drip a few drops of dye. After mixing, detergent is added.

Stirring is continued until the mixture becomes sticky and thick. An excessively thick mixture is diluted with washing liquid.

Now you need to put on rubber gloves and knead the mass like dough. The liquid released during the process is removed.

It turns out a viscous, rubber-like mass. The toy is well preserved in a closed jar. If she begins to change her appearance, then she is put in the refrigerator.

This toy can glow in the dark. Required Components:

• borax - half a teaspoon;
• iron oxide;
• glue - 30 g;
• Neodymium magnets;
• phosphor paint;
• water - half a glass.

Borax is dissolved in a glass of water. Half a glass of water is poured into a separate container with the addition of 30 g of glue. After intensive mixing paint is added. You can use regular dye, but then the toy will not glow.

Borax solution is slowly added to the prepared adhesive mixture. In this case, it is necessary to mix the mass thoroughly until the consistency reaches the desired density. The rest of the borax solution is poured out.

To give the toy magnetic properties, iron oxide is added to the mass.

It is necessary to lay out the resulting mass on the surface of the table and level it. Now you should pour iron oxide on it, evenly distributing it.

It remains to mix the resulting mixture thoroughly until a uniform gray appearance. The magnetic handgam is done. You can bring a magnet and see how the slime reaches for it.

From shaving foam

To make an elastic, large slime, you will need several ingredients:

• shaving foam;
• borax - 1.5 tsp;
• PVA glue;
• water (warm) - 50 ml.

Borax dissolves in water until the crystals completely disappear. Shaving foam and glue are squeezed into a separate container.

After stirring, you need to add a couple of tablespoons of borax solution. As you stir, the mixture will thicken. The solution must be added gradually until the mass begins to lag behind the walls of the container. Slime can be considered ready when it easily comes off hands.

paper handgam

Making such a toy out of paper is impossible. This material does not have the properties necessary for the product: ductility, viscosity, stickiness. The only option for creating a paper handgam is origami.

How to deal with slime

If the toy does not work, then you need to try to find the right amount of ingredients and their proportions empirically. A properly made slime should be taken out of the container in a single mass, viscous and homogeneous. If inhomogeneities are visible, you just need to rumple the product for a couple of minutes in your palms.

If the handgam is too sticky, it is difficult to clean the hands after the game, then you need to dilute it with a liquid ingredient from the composition. Water, liquid starch used in its manufacture can be used as a diluent. An overly liquid slime just slips off your fingers.

The situation is corrected by adding glue, flour, borax solution, which also depends on the component composition.

There is also a fun game that the child will love. Slime can be grown. If you put it in the refrigerator in a tightly closed container with water all night, then in the morning you can find an enlarged slime.

The kid will be interested in doing this manipulation on his own. Lizun is best preserved in a cool place and tightly closed container. If these conditions are neglected, then a homemade handgam can simply dry out.

Therefore, immediately after the game, you need to take care of saving it. If there is a drying of the handgam, then you can try to reanimate it.

The method of resuscitation depends on the composition of the product. If water was used, then the toy is reanimated by moisturizing it. But a completely dried handgam cannot be restored.

It is better to make a new one, especially since it is not expensive and very fast. You should not keep the toy on a surface with a nap, as it will quickly fill with dust and lint, losing its properties.

Playing with a slime is very popular with children, soothes adults. It is only necessary to explain to the child that it is impossible to bite and lick the toy. Wash your hands before and after playing.

The following video also shows very clearly how you can make a toy called slime yourself.

Lizun (Slime) is a toy that you don’t want to let go of. The jelly-like material, similar to mucus, helps not only the development of fine motor skills in children, but also the fight against stress in adults. Slime was originally made by Matte using guar gum and borax. Over time, the slime manufacturing recipe expanded: some components were replaced by others, making it the most accessible.

Preparing jelly-like anti-stress is a creative and interesting process. It doesn't take long and doesn't require a lot of ingredients. Following all the rules, the creation of a slime will not take more than 5 minutes.

Show all

The easiest way to make slime #1

You can prepare a jelly-like toy using soda and dishwashing liquid. These ingredients are easy to find in every home. But when working with them, you must remember that children need to play with such a slime only in the presence of adults.



• baking soda;
• detergent for dishes;
• water;
• food coloring or paint (preferably gouache).

Cooking method:

1. 1. Pour detergent into a glass bowl. The dosage is arbitrary. As the rest of the ingredients are added, it will be possible to focus on the resulting consistency by diluting the future slime with water or dishwashing detergent.
2. 2. Add baking soda to the detergent and mix everything thoroughly. If the mixture turns out to be thick, then it can be thinned with other components until the desired consistency is obtained.
3. 3. When the slime is ready, to give it a bright color, you can add dye or gouache to it and mix well again until fully cooked.



A jelly-like toy can also be made from ordinary toothpaste.

The easiest way to make slime #2

Shampoo and shower gel are only 2 components that are needed to make a slime.



You need to store such a slime at low temperatures, so after the games you need to put it in a container and place it in a refrigerator. Expiration date - 30 days.

Cooking method:

1. 1. To make a slime toy, you need to mix two components in equal proportions in a container. It is worth paying attention to the fact that granules and other additives should not be contained in either the gel or the shampoo. Otherwise, the slime will not be transparent.
2. 2. All ingredients must be thoroughly mixed, then sent to cool and reach the desired consistency in the refrigerator. After 12-20 hours, the jelly-like slime will be ready for use.



You can make slime not only from dish detergent, but also from powder. The manufacturing process can be seen in the video.

The easiest way to make slime #3

Slime can also be made from safe ingredients, which are based on ordinary baking flour. Even small children can play with a flour jelly toy.

Cooking materials:

• baking flour;
• cold water;
• hot water;
• food coloring or natural coloring (beet juice, carrot juice, etc.).

Cooking method:



1. 1. Pour 300-400 grams of pre-sifted flour into a small container.
2. 2. Pour 50 ml of cold water into the flour, then add 50 ml of warm water. Do not pour very hot water. After boiling water, you need to give it time to cool down a bit.
3. 3. All ingredients must be mixed well to obtain a homogeneous mass without lumps. After that, you can add a little dye to the resulting mixture, mix everything well, and send the resulting sticky consistency to the refrigerator for 5-6 hours.
4. 4. After the time has elapsed, you can take the flour slime out of the refrigerator and let the children play.



Slime can also be made from salt and shampoo. An easy way to cook can be seen in the video.

The easiest way to make slime #4

You can easily make an anti-stress toy from PVA glue and sodium tetraborate powder or solution. This manufacturing method is the most popular, since the slime prepared according to this recipe is very similar to the store version.

Cooking materials:

Which of the children, and even adults, will deny themselves a funny game with a slime? It will take a little time to make it with your own hands, and even fewer materials will be needed. There are several ways to make such an interesting toy from scrap materials.

• Half a teaspoon of boron.
• A small bottle of colorless glue.
• Any harmless dye.
• Water.

To prepare the mass, from which the slime will eventually turn out, you need to take any two deep bowls. Be sure to need two containers, because a two-part solution is being prepared. Pour a glass of water into one bowl (take warm water) and add boron. The resulting mass should be well mixed to obtain a homogeneous consistency.

In the second bowl, you need to mix 100 milliliters of water, 30 grams of discolored glue. To give color, use a dye, it must be added at this stage. Once again, mix everything well.

Then you should mix the two components. To do this, carefully pour the contents of the first bowl into the second. In the process of connecting the two parts, the slime will gradually begin to acquire the correct consistency, and the whole mass will be stretchy.

The process of preparing the slime is over, you can start exciting games, most importantly, make sure that the children do not try it with their mouths. You need to store such a slime in a well-closing container.

Making slimes from glue and starch

Making slime from glue and starch with your own hands

Another option that is even simpler than the previous one.

• Liquid starch.
• PVA glue.
• Plastic bag.
• Dye.

Lizun - This is a toy for children, so all materials should be as natural as possible. If there is no food coloring, you can replace it with gouache paints. Be careful, if the child is allergic to any dyes, you can make the slime colorless. Particular attention should be paid to the production time of the glue, it must be fresh, the slime will not work out of the old glue.

You need to take a tight plastic bag and pour about 70 milliliters of liquid starch into it. Often such starch is used during washing, this is how it differs from food starch. If this is not the case, then you can take the usual one, only it should be diluted: one part of water to two parts of starch.

Following the starch, send a few drops of natural dye into the bag, the main thing is not to overdo it, otherwise, during the games, the slime will stain not only the hands, but also the surface.
Next, you need to add about 25 grams of PVA glue (be sure to mix the bottle with glue well beforehand).

Now it is good to close or tie the bag and mix thoroughly until the contents look like a thick mass.

You may not be able to achieve the right consistency right away. Don't despair right away, because the alteration will only take a few minutes. The main thing is to find a middle ground and mix all the ingredients in the right proportions.

Store also in a closed container to protect from dust. The service life of such a slime is about a week.

Lizun from soda

Such a toy can be given to children only in the presence of adults. This is due to the fact that it contains detergent. It is necessary to make sure that after the games the child thoroughly washed his hands.

• Detergent.
• Baking soda.
• Water.
• Natural dye.

Pour a small amount of detergent into the prepared dishes, add water and dye. With these ingredients, you can also adjust the density of the resulting mass simply by adding water or detergent.

In the resulting mass, add soda and mix well. The resulting mixture should have sufficient density. If too much soda is added, you can dilute it with water to the desired consistency.

The color of the resulting slime can be adjusted by adding dyes. That's all, the soda slime is ready for play. Make sure that the child does not taste such a toy.

Another easy way to make slime.

• Your favorite shampoo
• Shower gel or dish detergent.

In prepared dishes, mix equal amounts of shampoo and shower gel or dish detergent. All ingredients should be of a homogeneous consistency, and not contain any additional substances, such as scrub particles, which are often added to shower gels. The color of the slime you get will depend on the materials used.

All components must be mixed well and put them in the same container in which they were mixed in the refrigerator. The resulting mass should be there for at least a day, only after this time the slime will harden to the correct consistency, and it will be possible to play with it. It must be stored only in the refrigerator so that it does not melt and does not lose its shape, in a closed container.

Make sure that the slime stays clean, if there is a lot of dust on it, then it should be thrown away and a new one should be prepared. This toy will last about one month.

Making such slimes at home is not difficult. The only nuance that needs to be taken into account is that for its manufacture you need to take a non-flowing washing powder, but a gel-like one. Unfortunately, it is impossible to replace it with liquid soap or shower gel, because these products contain other components.

• Gel laundry detergent.
• Office glue.
• Natural dye.
• Medical or other thin rubber gloves.
• Storage container.

It is necessary to pour about one-fourth cup of clerical glue into the prepared container. Glue can be more or less, it depends only on your preferences in the size of the slime. The more glue, the bigger slime you get.

Add a natural dye of the desired color to the glue and mix the components well so that the glue acquires a uniform color.

In the resulting mass, you need to add 40 grams of gel-like powder. Again, mix well the resulting mass. Over time, this mass will become sticky and will have the consistency of putty. Make sure that the mass does not get too thick. If this happens, then a few drops of powder should be added.

Next, you need to put on gloves, get the resulting mass from the container and start kneading. The process is approximately the same as if you were kneading dough. During kneading, excess liquid will come out of the slime, if any, and the mass will become soft and elastic.

Store the resulting slime in a tightly closed container. If you notice that it has begun to melt or has become too soft, then you can send it to the refrigerator.

Slime from flour

This cooking option is most suitable for young children. If you use dyes from natural substances, then it becomes completely harmless and not dangerous to the health of the baby. The only disadvantage of these dyes is that they are not so bright, but harmless.

• Regular flour.
• Hot water.
• Cold water.
• Natural dye.

It is necessary to take a small bowl and pour 400 grams of flour into it. You can sift it through a sieve, so the future mass will be more homogeneous and easier to knead.

Then we add a quarter cup of warm water to it, it should be just warm, you can not pour boiling water.

We send to a cold place for 4 hours. When the whole mass has cooled down and acquired the desired shape, you can let the children play.

A very interesting slime can turn out if you make it magnetic, it also has the property of glowing in the dark. There is no need to buy such a slime in the store, you can easily make it yourself.

• Already familiar boron.
• Water.
• Office glue.
• iron oxide.
• neodymium magnet.

Mix everything very carefully until the boron is completely dissolved in water. It's cooked in one pot.

In the second bowl, you need to mix 10 milliliters of water and 30 grams of stationery glue. As before, everything is mixed very well and a coloring matter is added to the resulting mass. If you add paint at this stage, which contains phosphorus, you get a slime that glows in the dark.

Carefully mix the two components of the future slime into a homogeneous mass. The main thing is not to rush and mix everything well, then the mass will turn out to be the desired density.

The mass that turned out must be decomposed on a flat surface, and iron oxide should be added to its middle.

Lizun, which will be magnetized, is ready. Now it can be moved with a magnet on a flat surface.

Sometimes such situations happen that it seems that all the ingredients are correct and they did not deviate from the instructions, but the slime still did not work out. It's all about the parts you used to make it. Each material is significantly different, different manufacturers, using the same components, can produce a product at the output that is not similar to its counterpart. Therefore, you should not strictly adhere to the described proportions, depending on your materials, their amount may differ. Don't give up right away, just experiment.

Lizun, which meets all standards, should be removed in a homogeneous mass without much effort from the dishes where you store it.

If your toy is very sticky, this can be seen from the threads that will follow the spoon. When you touch it with your fingers, it is too sticky and does not lag behind well, you need to dilute it slightly. This can be done with water or starch.

When your slime stretches, but practically does not stick, it means that, on the contrary, there is too much liquid. To add thickness, you need to add a little glue or the main ingredient that was used for cooking.

Do not be afraid to experiment, only by trial and error you will be able to choose the right consistency, and your children will enjoy a new, and most importantly, toy that is absolutely not harmful to the health of the baby.
Watch the video: "LIZUN" at Home
See more crafts in the section. See you on the pages of our site.